andyh-deprec 1.99.26

data/lib/deprec/templates/nagios/commands.cfg.erb

@@ -0,0 +1,240 @@
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.0b7
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example command definitions
+#        that you can reference in host, service, and contact definitions.
+#       
+#        You don't need to keep commands in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands.  They may or may not work on
+# your system without modification.  As an example, some systems will require 
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+
+# 'notify-host-by-email' command definition
+define command{
+	command_name	notify-host-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+	}
+
+# 'notify-service-by-email' command definition
+define command{
+	command_name	notify-service-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$" | /bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+	}
+
+
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+
+# This command checks to see if a host is "alive" by pinging it
+# The check must result in a 100% packet loss or 5 second (5000ms) round trip 
+# average time to produce a critical error.
+# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+
+# 'check-host-alive' command definition
+define command{
+        command_name    check-host-alive
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+        }
+
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands.  They may or may not work on
+# your system, as they must be modified for your plugins.  See the HTML 
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE:  The following 'check_local_...' functions are designed to monitor
+#        various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+# 'check_local_disk' command definition
+define command{
+        command_name    check_local_disk
+        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+        }
+
+
+# 'check_local_load' command definition
+define command{
+        command_name    check_local_load
+        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_procs' command definition
+define command{
+        command_name    check_local_procs
+        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+        }
+
+
+# 'check_local_users' command definition
+define command{
+        command_name    check_local_users
+        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_swap' command definition
+define command{
+	command_name	check_local_swap
+	command_line	$USER1$/check_swap -w $ARG1$ -c $ARG2$
+	}
+
+
+# 'check_local_mrtgtraf' command definition
+define command{
+	command_name	check_local_mrtgtraf
+	command_line	$USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+	}
+
+
+################################################################################
+# NOTE:  The following 'check_...' commands are used to monitor services on
+#        both local and remote hosts.
+################################################################################
+
+# 'check_ftp' command definition
+define command{
+        command_name    check_ftp
+        command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_hpjd' command definition
+define command{
+        command_name    check_hpjd
+        command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_snmp' command definition
+define command{
+        command_name    check_snmp
+        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_http' command definition
+define command{
+        command_name    check_http
+        command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_ssh' command definition
+define command{
+	command_name	check_ssh
+	command_line	$USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+	}
+
+
+# 'check_dhcp' command definition
+define command{
+	command_name	check_dhcp
+	command_line	$USER1$/check_dhcp $ARG1$
+	}
+
+
+# 'check_ping' command definition
+define command{
+        command_name    check_ping
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+        }
+
+
+# 'check_pop' command definition
+define command{
+        command_name    check_pop
+        command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_imap' command definition
+define command{
+        command_name    check_imap
+        command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_smtp' command definition
+define command{
+        command_name    check_smtp
+        command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_tcp' command definition
+define command{
+	command_name	check_tcp
+	command_line	$USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_udp' command definition
+define command{
+	command_name	check_udp
+	command_line	$USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_nt' command definition
+define command{
+	command_name	check_nt
+	command_line	$USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+	}
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services).  If you
+# plan on simply writing performance data out to a file, consider using the 
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+
+# 'process-host-perfdata' command definition
+define command{
+	command_name	process-host-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /usr/local/nagios/var/host-perfdata.out
+	}
+
+
+# 'process-service-perfdata' command definition
+define command{
+	command_name	process-service-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /usr/local/nagios/var/service-perfdata.out
+	}
+
+

data/lib/deprec/templates/nagios/contacts.cfg.erb

@@ -0,0 +1,57 @@
+###############################################################################
+###############################################################################
+#
+# CONTACT GROUPS
+#
+###############################################################################
+###############################################################################
+
+# We only have one contact in this simple configuration file, so there is
+# no need to create more than one contact group.
+
+define contactgroup{
+        contactgroup_name       admins
+        alias                   Nagios Administrators
+        members                 nagiosadmin
+}
+
+###############################################################################
+###############################################################################
+#
+# CONTACTS
+#
+###############################################################################
+###############################################################################
+
+define contact{
+        contact_name    nagiosadmin		; Short name of user
+		use				generic-contact		 (defined above)
+        alias           Nagios Admin	; Full name of user
+
+        email           root@localhost	; << CHANGE TO YOUR EMAIL ADDRESS
+        }
+
+###############################################################################
+###############################################################################
+#
+# CONTACT TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+define contact{
+        name                            generic-contact    	
+        service_notification_period     24x7			
+        host_notification_period        24x7			
+        service_notification_options    w,u,c,r,f,s		
+        host_notification_options       d,u,r,f,s		
+        service_notification_commands   notify-service-by-email	
+        host_notification_commands      notify-host-by-email	
+        register                        0       		
+        }
+
+
+
+
+
+

data/lib/deprec/templates/nagios/hosts.cfg.erb

@@ -0,0 +1,143 @@
+###############################################################################
+###############################################################################
+#
+# HOST GROUPS
+#
+###############################################################################
+###############################################################################
+
+define hostgroup{ 
+	hostgroup_name  servers
+}
+
+define hostgroup{ 
+	hostgroup_name  app
+}
+
+define hostgroup{ 
+	hostgroup_name  web
+}
+
+define hostgroup{ 
+	hostgroup_name  routers
+}
+
+###############################################################################
+###############################################################################
+#
+# HOSTS
+#
+###############################################################################
+###############################################################################
+
+define host {
+	use server
+	host_name app01
+	hostgroups servers,app
+	address app01
+}
+
+define host {
+	use server
+	host_name app02
+	hostgroups servers.app
+	address app02
+}
+
+###############################################################################
+###############################################################################
+#
+# HOST TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic host definition template - This is NOT a real host, just a template!
+
+define host{
+	name                            generic-host; The name of this host template
+	notifications_enabled           1       	; Host notifications are enabled
+	event_handler_enabled           1       	; Host event handler is enabled
+	flap_detection_enabled          1       	; Flap detection is enabled
+	failure_prediction_enabled      1       	; Failure prediction is enabled
+	process_perf_data               1       	; Process performance data
+	retain_status_information       1       	; Retain status information across program restarts
+	retain_nonstatus_information    1       	; Retain non-status information across program restarts
+	notification_period				24x7		; Send host notifications at any time
+	register                        0       	; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+	}
+
+
+# Linux host definition template - This is NOT a real host, just a template!
+
+define host{
+	name				linux-server	; The name of this host template
+	use				generic-host	; This template inherits other values from the generic-host template
+	check_period			24x7		; By default, Linux hosts are checked round the clock
+	check_interval			5		; Actively check the host every 5 minutes
+	retry_interval			1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts		10		; Check each Linux host 10 times (max)
+    check_command           check-host-alive ; Default command to check Linux hosts
+	notification_period		workhours	; Linux admins hate to be woken up, so we only notify during the day
+							; Note that the notification_period variable is being overridden from
+							; the value that is inherited from the generic-host template!
+	notification_interval		120		; Resend notifications every 2 hours
+	notification_options		d,u,r		; Only send notifications for specific host states
+	contact_groups			admins		; Notifications get sent to the admins by default
+	register			0		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+	}
+
+
+
+# Windows host definition template - This is NOT a real host, just a template!
+
+define host{
+	name			windows-server	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, Windows servers are monitored round the clock
+	check_interval		5		; Actively check the server every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each server 10 times (max)
+	check_command		check-host-alive	; Default command to check if servers are "alive"
+	notification_period	24x7		; Send notification out at any time - day or night
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	hostgroups		windows-servers ; Host groups that Windows servers should be a member of
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+# We define a generic printer template that can be used for most printers we monitor
+
+define host{
+	name			generic-printer	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, printers are monitored round the clock
+	check_interval		5		; Actively check the printer every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each printer 10 times (max)
+	check_command		check-host-alive	; Default command to check if printers are "alive"
+	notification_period	workhours		; Printers are only used during the workday
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+# Define a template for switches that we can reuse
+define host{
+	name			generic-switch	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, switches are monitored round the clock
+	check_interval		5		; Switches are checked every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each switch 10 times (max)
+	check_command		check-host-alive	; Default command to check if routers are "alive"
+	notification_period	24x7		; Send notifications at any time
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}

data/lib/deprec/templates/nagios/htpasswd.users

@@ -0,0 +1 @@
+# access control for nagios web interface

data/lib/deprec/templates/nagios/localhost.cfg.erb

@@ -0,0 +1,157 @@
+###############################################################################
+# LOCALHOST.CFG - SAMPLE OBJECT CONFIG FILE FOR MONITORING THIS MACHINE
+#
+# Last Modified: 05-31-2007
+#
+# NOTE: This config file is intended to serve as an *extremely* simple 
+#       example of how you can create configuration entries to monitor
+#       the local (Linux) machine.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the local machine
+
+define host{
+        use                     linux-server            ; Name of host template to use
+							; This host definition will inherit all variables that are defined
+							; in (or inherited by) the linux-server host template definition.
+        host_name               localhost
+        alias                   localhost
+        address                 127.0.0.1
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define an optional hostgroup for Linux machines
+
+define hostgroup{
+        hostgroup_name  linux-servers ; The name of the hostgroup
+        alias           Linux Servers ; Long name of the group
+        members         localhost     ; Comma separated list of hosts that belong to this group
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Define a service to "ping" the local machine
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             PING
+	check_command			check_ping!100.0,20%!500.0,60%
+        }
+
+
+# Define a service to check the disk space of the root partition
+# on the local machine.  Warning if < 20% free, critical if
+# < 10% free space on partition.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Root Partition
+	check_command			check_local_disk!20%!10%!/
+        }
+
+
+
+# Define a service to check the number of currently logged in
+# users on the local machine.  Warning if > 20 users, critical
+# if > 50 users.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Current Users
+	check_command			check_local_users!20!50
+        }
+
+
+# Define a service to check the number of currently running procs
+# on the local machine.  Warning if > 250 processes, critical if
+# > 400 users.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Total Processes
+	check_command			check_local_procs!250!400!RSZDT
+        }
+
+
+
+# Define a service to check the load on the local machine. 
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Current Load
+	check_command			check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
+        }
+
+
+
+# Define a service to check the swap usage the local machine. 
+# Critical if less than 10% of swap is free, warning if less than 20% is free
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Swap Usage
+	check_command			check_local_swap!20!10
+        }
+
+
+
+# Define a service to check SSH on the local machine.
+# Disable notifications for this service by default, as not all users may have SSH enabled.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             SSH
+	check_command			check_ssh
+	notifications_enabled		0
+        }
+
+
+
+# Define a service to check HTTP on the local machine.
+# Disable notifications for this service by default, as not all users may have HTTP enabled.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             HTTP
+	check_command			check_http
+	notifications_enabled		0
+        }
+