andyh-deprec 1.99.26

data/lib/deprec/templates/nagios/cgi.cfg.erb

@@ -0,0 +1,321 @@
+#################################################################
+#
+# CGI.CFG - Sample CGI Configuration File for Nagios 3.0b7
+#
+# Last Modified: 10-07-2007
+#
+#################################################################
+
+
+# MAIN CONFIGURATION FILE
+# This tells the CGIs where to find your main configuration file.
+# The CGIs will read the main and host config files for any other
+# data they might need.
+
+main_config_file=/usr/local/nagios/etc/nagios.cfg
+
+
+
+# PHYSICAL HTML PATH
+# This is the path where the HTML files for Nagios reside.  This
+# value is used to locate the logo images needed by the statusmap
+# and statuswrl CGIs.
+
+physical_html_path=/usr/local/nagios/share
+
+
+
+# URL HTML PATH
+# This is the path portion of the URL that corresponds to the
+# physical location of the Nagios HTML files (as defined above).
+# This value is used by the CGIs to locate the online documentation
+# and graphics.  If you access the Nagios pages with an URL like
+# http://www.myhost.com/nagios, this value should be '/nagios'
+# (without the quotes).
+
+url_html_path=/nagios
+
+
+
+# CONTEXT-SENSITIVE HELP
+# This option determines whether or not a context-sensitive
+# help icon will be displayed for most of the CGIs.
+# Values: 0 = disables context-sensitive help
+#         1 = enables context-sensitive help
+
+show_context_help=0
+
+
+
+# PENDING STATES OPTION
+# This option determines what states should be displayed in the web
+# interface for hosts/services that have not yet been checked.
+# Values: 0 = leave hosts/services that have not been check yet in their original state
+#         1 = mark hosts/services that have not been checked yet as PENDING
+
+use_pending_states=1
+
+
+
+
+# AUTHENTICATION USAGE
+# This option controls whether or not the CGIs will use any 
+# authentication when displaying host and service information, as
+# well as committing commands to Nagios for processing.  
+#
+# Read the HTML documentation to learn how the authorization works!
+#
+# NOTE: It is a really *bad* idea to disable authorization, unless
+# you plan on removing the command CGI (cmd.cgi)!  Failure to do
+# so will leave you wide open to kiddies messing with Nagios and
+# possibly hitting you with a denial of service attack by filling up
+# your drive by continuously writing to your command file!
+#
+# Setting this value to 0 will cause the CGIs to *not* use
+# authentication (bad idea), while any other value will make them
+# use the authentication functions (the default).
+
+use_authentication=1
+
+
+
+# DEFAULT USER
+# Setting this variable will define a default user name that can
+# access pages without authentication.  This allows people within a
+# secure domain (i.e., behind a firewall) to see the current status
+# without authenticating.  You may want to use this to avoid basic
+# authentication if you are not using a secure server since basic
+# authentication transmits passwords in the clear.
+#
+# Important:  Do not define a default username unless you are
+# running a secure web server and are sure that everyone who has
+# access to the CGIs has been authenticated in some manner!  If you
+# define this variable, anyone who has not authenticated to the web
+# server will inherit all rights you assign to this user!
+ 
+#default_user_name=guest
+
+
+
+# SYSTEM/PROCESS INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# have access to viewing the Nagios process information as
+# provided by the Extended Information CGI (extinfo.cgi).  By
+# default, *no one* has access to this unless you choose to
+# not use authorization.  You may use an asterisk (*) to
+# authorize any user who has authenticated to the web server.
+
+authorized_for_system_information=nagiosadmin
+
+
+
+# CONFIGURATION INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# can view ALL configuration information (hosts, commands, etc).
+# By default, users can only view configuration information
+# for the hosts and services they are contacts for. You may use
+# an asterisk (*) to authorize any user who has authenticated
+# to the web server.
+
+authorized_for_configuration_information=nagiosadmin
+
+
+
+# SYSTEM/PROCESS COMMAND ACCESS
+# This option is a comma-delimited list of all usernames that
+# can issue shutdown and restart commands to Nagios via the
+# command CGI (cmd.cgi).  Users in this list can also change
+# the program mode to active or standby. By default, *no one*
+# has access to this unless you choose to not use authorization.
+# You may use an asterisk (*) to authorize any user who has
+# authenticated to the web server.
+
+authorized_for_system_commands=nagiosadmin
+
+
+
+# GLOBAL HOST/SERVICE VIEW ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can view information for all hosts and services that are being
+# monitored.  By default, users can only view information
+# for hosts or services that they are contacts for (unless you
+# you choose to not use authorization). You may use an asterisk (*)
+# to authorize any user who has authenticated to the web server.
+
+
+authorized_for_all_services=nagiosadmin
+authorized_for_all_hosts=nagiosadmin
+
+
+
+# GLOBAL HOST/SERVICE COMMAND ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can issue host or service related commands via the command
+# CGI (cmd.cgi) for all hosts and services that are being monitored. 
+# By default, users can only issue commands for hosts or services 
+# that they are contacts for (unless you you choose to not use 
+# authorization).  You may use an asterisk (*) to authorize any
+# user who has authenticated to the web server.
+
+authorized_for_all_service_commands=nagiosadmin
+authorized_for_all_host_commands=nagiosadmin
+
+
+
+
+# STATUSMAP BACKGROUND IMAGE
+# This option allows you to specify an image to be used as a 
+# background in the statusmap CGI.  It is assumed that the image
+# resides in the HTML images path (i.e. /usr/local/nagios/share/images).
+# This path is automatically determined by appending "/images"
+# to the path specified by the 'physical_html_path' directive.
+# Note:  The image file may be in GIF, PNG, JPEG, or GD2 format.
+# However, I recommend that you convert your image to GD2 format
+# (uncompressed), as this will cause less CPU load when the CGI
+# generates the image.
+
+#statusmap_background_image=smbackground.gd2
+
+
+
+# DEFAULT STATUSMAP LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statusmap CGI should use for drawing hosts.  If you do
+# not use this option, the default is to use user-defined
+# coordinates.  Valid options are as follows:
+#	0 = User-defined coordinates
+#	1 = Depth layers
+#       2 = Collapsed tree
+#       3 = Balanced tree
+#       4 = Circular
+#       5 = Circular (Marked Up)
+
+default_statusmap_layout=5
+
+
+
+# DEFAULT STATUSWRL LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statuswrl (VRML) CGI should use for drawing hosts.  If you
+# do not use this option, the default is to use user-defined
+# coordinates.  Valid options are as follows:
+#	0 = User-defined coordinates
+#       2 = Collapsed tree
+#       3 = Balanced tree
+#       4 = Circular
+
+default_statuswrl_layout=4
+
+
+
+# STATUSWRL INCLUDE
+# This option allows you to include your own objects in the 
+# generated VRML world.  It is assumed that the file
+# resides in the HTML path (i.e. /usr/local/nagios/share).
+
+#statuswrl_include=myworld.wrl
+
+
+
+# PING SYNTAX
+# This option determines what syntax should be used when
+# attempting to ping a host from the WAP interface (using
+# the statuswml CGI.  You must include the full path to
+# the ping binary, along with all required options.  The
+# $HOSTADDRESS$ macro is substituted with the address of
+# the host before the command is executed.
+# Please note that the syntax for the ping binary is
+# notorious for being different on virtually ever *NIX
+# OS and distribution, so you may have to tweak this to
+# work on your system.
+
+ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$
+
+
+
+# REFRESH RATE
+# This option allows you to specify the refresh rate in seconds
+# of various CGIs (status, statusmap, extinfo, and outages).  
+
+refresh_rate=90
+
+
+
+# ESCAPE HTML TAGS
+# This option determines whether HTML tags in host and service
+# status output is escaped in the web interface.  If enabled,
+# your plugin output will not be able to contain clickable links.
+
+escape_html_tags=1
+
+
+
+
+# SOUND OPTIONS
+# These options allow you to specify an optional audio file
+# that should be played in your browser window when there are
+# problems on the network.  The audio files are used only in
+# the status CGI.  Only the sound for the most critical problem
+# will be played.  Order of importance (higher to lower) is as
+# follows: unreachable hosts, down hosts, critical services,
+# warning services, and unknown services. If there are no
+# visible problems, the sound file optionally specified by
+# 'normal_sound' variable will be played.
+#
+#
+# <varname>=<sound_file>
+#
+# Note: All audio files must be placed in the /media subdirectory
+# under the HTML path (i.e. /usr/local/nagios/share/media/).
+
+#host_unreachable_sound=hostdown.wav
+#host_down_sound=hostdown.wav
+#service_critical_sound=critical.wav
+#service_warning_sound=warning.wav
+#service_unknown_sound=warning.wav
+#normal_sound=noproblem.wav
+
+
+
+# URL TARGET FRAMES
+# These options determine the target frames in which notes and 
+# action URLs will open.
+
+action_url_target=_blank
+notes_url_target=_blank
+
+
+
+
+# LOCK AUTHOR NAMES OPTION
+# This option determines whether users can change the author name 
+# when submitting comments, scheduling downtime.  If disabled, the 
+# author names will be locked into their contact name, as defined in Nagios.
+# Values: 0 = allow editing author names
+#         1 = lock author names (disallow editing)
+
+lock_author_names=1
+
+
+
+
+# SPLUNK INTEGRATION OPTIONS
+# These options allow you to enable integration with Splunk
+# in the web interface.  If enabled, you'll be presented with
+# "Splunk It" links in various places in the CGIs (log file,
+# alert history, host/service detail, etc).  Useful if you're
+# trying to research why a particular problem occurred.
+# For more information on Splunk, visit http://www.splunk.com/
+
+# This option determines whether the Splunk integration is enabled
+# Values: 0 = disable Splunk integration
+#         1 = enable Splunk integration
+
+#enable_splunk_integration=1
+
+
+# This option should be the URL used to access your instance of Splunk
+
+#splunk_url=http://127.0.0.1:8000/
+
+

data/lib/deprec/templates/nagios/check_linux_free_memory.pl

@@ -0,0 +1,118 @@
+#!/usr/bin/perl
+use strict;
+use warnings;
+use Getopt::Long;
+use File::Basename;
+
+# Author: Dean Wilson ; License: GPL
+# Project Home: http://www.unixdaemon.net/
+# For documentation look at the bottom of this file, or run with '-h'
+# Version 0.5 - Tided up arg handling. Added usage
+
+# Changes:
+# Usage information corrected, thanks to Bartlomiej Konarski
+
+# nagios requires a 3 for unknown errors.
+$SIG{__DIE__} = sub {
+  print @_;
+  exit 3;
+};
+
+my $app = basename($0);
+
+GetOptions(
+  "w|warn=s" => \( my $warn_percent = 30 ),
+  "c|crit=s" => \( my $crit_percent = 20 ),
+  "h|help"   => \&usage,
+);
+
+# remove any % passed in
+$warn_percent =~ s/%//;
+$crit_percent =~ s/%//;
+
+die "Warning value must be larger than critical value\n"
+  unless $warn_percent >= $crit_percent;
+
+my $memory_stats_ref = get_mem();
+my $percentage_free = get_percentage($memory_stats_ref);
+
+if ($percentage_free <= $crit_percent) {
+  print "CRIT: Only $percentage_free% ($memory_stats_ref->{free_cache}M) of memory free!\n";
+  exit 2;
+} elsif ($percentage_free <= $warn_percent) {
+  print "WARN: Only $percentage_free% ($memory_stats_ref->{free_cache}M) of memory free!\n";
+  exit 1;
+} else {
+  print "OK: $percentage_free% ($memory_stats_ref->{free_cache}M) free memory.\n";
+  exit 0;
+}
+
+#########################################
+
+sub get_mem {
+   # get the two values from the free command.
+   # return them as a hash ref
+
+   my %memory_stats;
+
+  open(FREEPIPE, "free -m |")
+    || die "Failed to open 'free'\n$!\n";
+
+  while(<FREEPIPE>) {
+    chomp;
+    next unless m!buffers/cache:!;
+    m/[^\d]+(\d+)\s+(\d+)$/;
+    $memory_stats{'used_cache'} = $1;
+    $memory_stats{'free_cache'} = $2;
+  }
+
+  close FREEPIPE;
+
+  return \%memory_stats;
+}
+
+#------------------------------------------#
+
+sub get_percentage {
+  my $mem_stats_ref = shift;
+  my $percentage_free;
+
+  my $total = $mem_stats_ref->{'used_cache'} + $mem_stats_ref->{'free_cache'};
+  $percentage_free = int (($mem_stats_ref->{'free_cache'} / $total) * 100);
+
+  return $percentage_free;
+}
+
+#------------------------------------------#
+
+sub usage {
+  print<<EOU;
+
+$app - Copyright (c) 2006 Dean Wilson. Licensed under the GPL
+
+This script reports the percentage of memory that's still free along
+with a warning or a critical based upon user defined threshholds.
+
+This script was written to be used in conjunction with Nagios.
+
+Usage Examples:
+ $app   -w 20 -c 10
+ $app   -warn 30 -crit 15
+ $app   -h    # shows this information
+
+Options:
+  -w | -warn
+    Warn if less than this percentage is free.
+  -c | -crit
+    Crit if less than this percentage is free.
+  -h
+    This help and usage information
+
+Notes:
+  The output format of "free" (which this script wraps) can change
+  between releases. Please double check the outputs before you deploy
+  this script.
+
+EOU
+  exit 3;
+}

data/lib/deprec/templates/nagios/check_mongrel_cluster.rb

@@ -0,0 +1,82 @@
+#!/usr/bin/env ruby  
+
+require 'yaml'
+
+# Exit status
+OK = 0
+WARNING = 1
+CRITICAL = 2
+
+# use options instead
+application = ARGV[0]
+cluster_config_file = "/etc/mongrel_cluster/#{application}.yml"
+
+def running?(pid)
+  # check if pid is running
+  ps_output = `ps -p #{pid}`
+  ps_output =~ /mongrel_rails/
+end
+
+def chdir_cwd
+  pwd = Dir.pwd
+  Dir.chdir(@options["cwd"]) if @options["cwd"]     
+  yield
+  Dir.chdir(pwd) if @options["cwd"]
+end
+
+def read_pid(port)
+  pid_file = port_pid_file(port)
+  pid = 0
+  chdir_cwd do     
+    pid = File.read(pid_file)
+  end
+  pid
+end
+
+
+# Load cluster config from YAML file
+begin
+  cluster_config = YAML.load_file(cluster_config_file)
+  port = cluster_config['port'].to_i
+  servers = cluster_config['servers']
+  ports = (port..port+servers-1).collect
+  if cluster_config['pid_file'].match(/^\//)
+    pid_file_base = cluster_config['pid_file']
+  else
+    pid_file_base = File.join(cluster_config['cwd'], cluster_config['pid_file'])
+  end
+rescue
+  print 'CRITICAL'
+  puts " Could not load mongrel cluster file (#{cluster_config_file})"
+  exit CRITICAL
+end
+
+# Check each mongrel
+running = []
+not_running = []
+
+ports.each {|port|
+  pidfile = pid_file_base.sub('.pid',".#{port}.pid")
+  if File.readable?(pidfile)
+    pid = File.read(pidfile)
+    if running?(pid)
+      running << port
+    else
+      not_running << port
+    end
+  else
+    not_running << port
+  end
+} 
+
+# Print response and exit
+
+if not_running.empty?
+  print 'OK '
+  puts "mongrel running on ports #{running.join(', ')}"
+  exit OK
+else
+  print 'CRITICAL '
+  puts "mongrel not running on #{not_running.join(', ')}. #{'Running on ' + running.join(', ') unless running.empty?}"
+  exit CRITICAL
+end