weac 2.6.4__py3-none-any.whl → 3.0.0__py3-none-any.whl

weac/eigensystem.py

@@ -1,658 +0,0 @@
-"""Base class for the elastic analysis of layered snow slabs."""
-# pylint: disable=invalid-name,too-many-instance-attributes
-# pylint: disable=too-many-arguments,too-many-locals
-
-# Third party imports
-import numpy as np
-
-# Project imports
-from weac.tools import bergfeld, calc_center_of_gravity, load_dummy_profile
-
-
-class Eigensystem:
-    """
-    Base class for a layered beam on an elastic foundation.
-
-    Provides geometry, material and loading attributes, and methods
-    for the assembly of a fundamental system.
-
-    Attributes
-    ----------
-    g : float
-        Gravitational constant (mm/s^2). Default is 9180.
-    lski : float
-        Effective out-of-plance length of skis (mm). Default is 1000.
-    tol : float
-        Relative Romberg integration toleranc. Default is 1e-3.
-    system : str
-        Type of boundary value problem. Default is 'pst-'.
-    weak : dict
-        Dictionary that holds the weak layer properties Young's
-        modulus (MPa) and Poisson's ratio. Defaults are 0.25
-        and 0.25, respectively.
-    t : float
-        Weak-layer thickness (mm). Default is 30.
-    kn : float
-        Compressive foundation (weak-layer) stiffness (N/mm^3).
-    kt : float
-        Shear foundation (weak-layer) stiffness (N/mm^3).
-    tc : float
-        Weak-layer thickness after collapse (mm).
-    slab : ndarray
-        Matrix that holds the elastic properties of all slab layers.
-        Columns are density (kg/m^3), layer heigth (mm), Young's
-        modulus (MPa), shear modulus (MPa), and Poisson's ratio.
-    k : float
-        Shear correction factor of the slab. Default is 5/6.
-    h : float
-        Slab thickness (mm). Default is 300.
-    zs : float
-        Z-coordinate of the center of gravity of the slab (mm).
-    A11 : float
-        Extensional stiffness of the slab (N/mm).
-    B11 : float
-        Bending-extension coupling stiffness of the slab (N).
-    D11 : float
-        Bending stiffness of the slab (Nmm).
-    kA55 : float
-        Shear stiffness of the slab (N/mm).
-    K0 : float
-        Characteristic stiffness value (N).
-    ewC : ndarray
-        List of complex eigenvalues.
-    ewR : ndarray
-        List of real eigenvalues.
-    evC : ndarray
-        Matrix with eigenvectors corresponding to complex
-        eigenvalues as columns.
-    evR : ndarray
-        Matrix with eigenvectors corresponding to real
-        eigenvalues as columns.
-    sC : float
-        X-coordinate shift (mm) of complex parts of the solution.
-        Used for numerical stability.
-    sR : float
-        X-coordinate shift (mm) of real parts of the solution.
-        Used for numerical stability.
-    sysmat : ndarray
-        System matrix.
-    lC : float
-        Cracklength whose maximum deflection equals the
-        weak-layer thickness (mm).
-    lS : float
-        Cracklength when touchdown exerts maximum support
-        on the slab (mm). Corresponds to the longest possible
-        unbedded length.
-    ratio : float
-        Increment factor for the weak-layer stiffness from intact
-        to collapsed state.
-    beta : float
-        Describes the stiffnesses of weak-layer and slab.
-    """
-
-    def __init__(self, system="pst-", touchdown=False):
-        """
-        Initialize eigensystem with user input.
-
-        Arguments
-        ---------
-        system : {'pst-', '-pst', 'vpst-', '-vpst', 'skier', 'skiers'}, optional
-            Type of system to analyse: PST cut from the right (pst-),
-            PST cut form the left (-pst), PST with vertical faces cut
-            from the right (vpst-), PST with vertical faces cut from the
-            left (-vpst), one skier on infinite slab (skier) or multiple
-            skiers on infinite slab (skiers). Default is 'pst-'.
-        layers : list, optional
-            2D list of layer densities and thicknesses. Columns are
-            density (kg/m^3) and thickness (mm). One row corresponds
-            to one layer. Default is [[240, 200], ].
-        """
-        # Assign global attributes
-        self.g = 9810  # Gravitaiton (mm/s^2)
-        self.lski = 1000  # Effective out-of-plane length of skis (mm)
-        self.tol = 1e-3  # Relative Romberg integration tolerance
-        self.system = system  # 'pst-', '-pst', 'vpst-', '-vpst', 'skier', 'skiers'
-
-        # Initialize weak-layer attributes that will be filled later
-        self.weak = False  # Weak-layer properties dictionary
-        self.t = False  # Weak-layer thickness (mm)
-        self.kn = False  # Weak-layer compressive stiffness
-        self.kt = False  # Weak-layer shear stiffness
-
-        # Initialize slab attributes
-        self.p = 0  # Surface line load (N/mm)
-        self.slab = False  # Slab properties dictionary
-        self.k = False  # Slab shear correction factor
-        self.h = False  # Total slab height (mm)
-        self.zs = False  # Z-coordinate of slab center of gravity (mm)
-        self.phi = False  # Slab inclination (°)
-        self.A11 = False  # Slab extensional stiffness
-        self.B11 = False  # Slab bending-extension coupling stiffness
-        self.D11 = False  # Slab bending stiffness
-        self.kA55 = False  # Slab shear stiffness
-        self.K0 = False  # Stiffness determinant
-
-        # Inizialize eigensystem attributes
-        self.ewC = False  # Complex eigenvalues
-        self.ewR = False  # Real eigenvalues
-        self.evC = False  # Complex eigenvectors
-        self.evR = False  # Real eigenvectors
-        self.sC = False  # Stability shift of complex eigenvalues
-        self.sR = False  # Stability shift of real eigenvalues
-
-        # Initialize touchdown attributes
-        self.touchdown = touchdown  # Flag whether touchdown is possible
-        self.a = False  # Cracklength
-        self.tc = False  # Weak-layer collapse height (mm)
-        self.ratio = False  # Stiffness ratio of collapsed to uncollapsed weak-layer
-        self.betaU = False  # Ratio of slab to bedding stiffness (uncollapsed)
-        self.betaC = False  # Ratio of slab to bedding stiffness (collapsed)
-        self.mode = False  # Touchdown-mode can be either A, B, C or D
-        self.td = False  # Touchdown length
-
-    def set_foundation_properties(
-        self, t: float = 30.0, E: float = 0.25, nu: float = 0.25, update: bool = False
-    ):
-        """
-        Set material properties and geometry of foundation (weak layer).
-
-        Arguments
-        ---------
-        t : float, optional
-            Weak-layer thickness (mm). Default is 30.
-        cf : float
-            Fraction by which the weak-layer thickness is reduced
-            due to collapse. Default is 0.5.
-        E : float, optional
-            Weak-layer Young modulus (MPa). Default is 0.25.
-        nu : float, optional
-            Weak-layer Poisson ratio. Default is 0.25.
-        update : bool, optional
-            If true, recalculate the fundamental system after
-            foundation properties have changed.
-        """
-        # Geometry
-        self.t = t  # Weak-layer thickness (mm)
-
-        # Material properties
-        self.weak = {
-            "nu": nu,  # Poisson's ratio (-)
-            "E": E,  # Young's modulus (MPa)
-        }
-
-        # Recalculate the fundamental system after properties have changed
-        if update:
-            self.calc_fundamental_system()
-
-    def set_beam_properties(self, layers, C0=6.5, C1=4.4, nu=0.25, update=False):
-        """
-        Set material and properties geometry of beam (slab).
-
-        Arguments
-        ---------
-        layers : list or str
-            2D list of top-to-bottom layer densities and thicknesses.
-            Columns are density (kg/m^3) and thickness (mm). One row
-            corresponds to one layer. If entered as str, last split
-            must be available in database.
-        C0 : float, optional
-            Multiplicative constant of Young modulus parametrization
-            according to Bergfeld et al. (2023). Default is 6.5.
-        C1 : float, optional
-            Exponent of Young modulus parameterization according to
-            Bergfeld et al. (2023). Default is 4.6.
-        nu : float, optional
-            Possion's ratio. Default is 0.25
-        update : bool, optional
-            If true, recalculate the fundamental system after
-            foundation properties have changed.
-        """
-        if isinstance(layers, str):
-            # Read layering and Young's modulus from database
-            layers, E = load_dummy_profile(layers.split()[-1])
-        else:
-            # Compute Young's modulus from density parametrization
-            layers = np.array(layers)
-            E = bergfeld(layers[:, 0], C0=C0, C1=C1)  # Young's modulus
-
-        # Derive other elastic properties
-        nu = nu * np.ones(layers.shape[0])  # Global poisson's ratio
-        G = E / (2 * (1 + nu))  # Shear modulus
-        self.k = 5 / 6  # Shear correction factor
-
-        # Compute total slab thickness and center of gravity
-        self.h, self.zs = calc_center_of_gravity(layers)
-
-        # Assemble layering into matrix (top to bottom)
-        # Columns are density (kg/m^3), layer thickness (mm)
-        # Young's modulus (MPa), shear modulus (MPa), and
-        # Poisson's ratio
-        self.slab = np.vstack([layers.T, E, G, nu]).T
-
-        # Recalculate the fundamental system after properties have changed
-        if update:
-            self.calc_fundamental_system()
-
-    def set_surface_load(self, p):
-        """
-        Set surface line load.
-
-        Define a distributed surface load (N/mm) that acts
-        in vertical (gravity) direction on the top surface
-        of the slab.
-
-        Arguments
-        ---------
-        p : float
-            Surface line load (N/mm) that acts in vertical
-            (gravity) direction onm the top surface of the
-            slab.
-        """
-        self.p = p
-
-    def calc_foundation_stiffness(self):
-        """Compute foundation normal and shear stiffness."""
-        # Elastic moduli (MPa) under plane-strain conditions
-        G = self.weak["E"] / (2 * (1 + self.weak["nu"]))  # Shear modulus
-        E = self.weak["E"] / (1 - self.weak["nu"] ** 2)  # Young's modulus
-
-        # Foundation (weak layer) stiffnesses (N/mm^3)
-        self.kn = E / self.t  # Normal stiffness
-        self.kt = G / self.t  # Shear stiffness
-
-    def get_ply_coordinates(self):
-        """
-        Calculate ply (layer) z-coordinates.
-
-        Returns
-        -------
-        ndarray
-            Ply (layer) z-coordinates (top to bottom) in coordinate system with
-            downward pointing z-axis (z-list will be negative to positive).
-
-        """
-        # Get list of ply (layer) thicknesses and prepend 0
-        t = np.concatenate(([0], self.slab[:, 1]))
-        # Calculate and return ply z-coordiantes
-        return np.cumsum(t) - self.h / 2
-
-    def calc_laminate_stiffness_matrix(self):
-        """
-        Provide ABD matrix.
-
-        Return plane-strain laminate stiffness matrix (ABD matrix).
-        """
-        # Get ply coordinates (z-list is top to bottom, negative to positive)
-        z = self.get_ply_coordinates()
-        # Initialize stiffness components
-        A11, B11, D11, kA55 = 0, 0, 0, 0
-        # Add layerwise contributions
-        for i in range(len(z) - 1):
-            E, G, nu = self.slab[i, 2:5]
-            A11 = A11 + E / (1 - nu**2) * (z[i + 1] - z[i])
-            B11 = B11 + 1 / 2 * E / (1 - nu**2) * (z[i + 1] ** 2 - z[i] ** 2)
-            D11 = D11 + 1 / 3 * E / (1 - nu**2) * (z[i + 1] ** 3 - z[i] ** 3)
-            kA55 = kA55 + self.k * G * (z[i + 1] - z[i])
-
-        self.A11 = A11
-        self.B11 = B11
-        self.D11 = D11
-        self.kA55 = kA55
-        self.K0 = B11**2 - A11 * D11
-
-    def calc_system_matrix(self):
-        """
-        Assemble first-order ODE system matrix K.
-
-        Using the solution vector z = [u, u', w, w', psi, psi']
-        the ODE system is written in the form Az' + Bz = d
-        and rearranged to z' = -(A ^ -1)Bz + (A ^ -1)d = Kz + q
-
-        Returns
-        -------
-        ndarray
-            System matrix K (6x6).
-        """
-        kn = self.kn
-        kt = self.kt
-
-        # Abbreviations (MIT t/2 im GGW, MIT w' in Kinematik)
-        K21 = kt * (-2 * self.D11 + self.B11 * (self.h + self.t)) / (2 * self.K0)
-        K24 = (
-            2 * self.D11 * kt * self.t
-            - self.B11 * kt * self.t * (self.h + self.t)
-            + 4 * self.B11 * self.kA55
-        ) / (4 * self.K0)
-        K25 = (
-            -2 * self.D11 * self.h * kt
-            + self.B11 * self.h * kt * (self.h + self.t)
-            + 4 * self.B11 * self.kA55
-        ) / (4 * self.K0)
-        K43 = kn / self.kA55
-        K61 = kt * (2 * self.B11 - self.A11 * (self.h + self.t)) / (2 * self.K0)
-        K64 = (
-            -2 * self.B11 * kt * self.t
-            + self.A11 * kt * self.t * (self.h + self.t)
-            - 4 * self.A11 * self.kA55
-        ) / (4 * self.K0)
-        K65 = (
-            2 * self.B11 * self.h * kt
-            - self.A11 * self.h * kt * (self.h + self.t)
-            - 4 * self.A11 * self.kA55
-        ) / (4 * self.K0)
-
-        # System matrix
-        K = [
-            [0, 1, 0, 0, 0, 0],
-            [K21, 0, 0, K24, K25, 0],
-            [0, 0, 0, 1, 0, 0],
-            [0, 0, K43, 0, 0, -1],
-            [0, 0, 0, 0, 0, 1],
-            [K61, 0, 0, K64, K65, 0],
-        ]
-
-        return np.array(K)
-
-    def get_load_vector(self, phi):
-        """
-        Compute sytem load vector q.
-
-        Using the solution vector z = [u, u', w, w', psi, psi']
-        the ODE system is written in the form Az' + Bz = d
-        and rearranged to z' = -(A ^ -1)Bz + (A ^ -1)d = Kz + q
-
-        Arguments
-        ---------
-        phi : float
-            Inclination (degrees). Counterclockwise positive.
-
-        Returns
-        -------
-        ndarray
-            System load vector q (6x1).
-        """
-        qn, qt = self.get_weight_load(phi)
-        pn, pt = self.get_surface_load(phi)
-        return np.array(
-            [
-                [0],
-                [
-                    (
-                        self.B11 * (self.h * pt - 2 * qt * self.zs)
-                        + 2 * self.D11 * (qt + pt)
-                    )
-                    / (2 * self.K0)
-                ],
-                [0],
-                [-(qn + pn) / self.kA55],
-                [0],
-                [
-                    -(
-                        self.A11 * (self.h * pt - 2 * qt * self.zs)
-                        + 2 * self.B11 * (qt + pt)
-                    )
-                    / (2 * self.K0)
-                ],
-            ]
-        )
-
-    def calc_eigensystem(self):
-        """Calculate eigenvalues and eigenvectors of the system matrix."""
-        # Calculate eigenvalues (ew) and eigenvectors (ev)
-        ew, ev = np.linalg.eig(self.calc_system_matrix())
-        # Classify real and complex eigenvalues
-        real = (ew.imag == 0) & (ew.real != 0)  # real eigenvalues
-        cmplx = ew.imag > 0  # positive complex conjugates
-        # Eigenvalues
-        self.ewC = ew[cmplx]
-        self.ewR = ew[real].real
-        # Eigenvectors
-        self.evC = ev[:, cmplx]
-        self.evR = ev[:, real].real
-        # Prepare positive eigenvalue shifts for numerical robustness
-        self.sR, self.sC = np.zeros(self.ewR.shape), np.zeros(self.ewC.shape)
-        self.sR[self.ewR > 0], self.sC[self.ewC > 0] = -1, -1
-
-    def calc_fundamental_system(self):
-        """Calculate the fundamental system of the problem."""
-        self.calc_foundation_stiffness()
-        self.calc_laminate_stiffness_matrix()
-        self.calc_eigensystem()
-
-    def get_weight_load(self, phi):
-        """
-        Calculate line loads from slab mass.
-
-        Arguments
-        ---------
-        phi : float
-            Inclination (degrees). Counterclockwise positive.
-
-        Returns
-        -------
-        qn : float
-            Line load (N/mm) at center of gravity in normal direction.
-        qt : float
-            Line load (N/mm) at center of gravity in tangential direction.
-        """
-        # Convert units
-        phi = np.deg2rad(phi)  # Convert inclination to rad
-        rho = self.slab[:, 0] * 1e-12  # Convert density to t/mm^3
-        # Sum up layer weight loads
-        q = sum(rho * self.g * self.slab[:, 1])  # Line load (N/mm)
-        # Split into components
-        qn = q * np.cos(phi)  # Normal direction
-        qt = -q * np.sin(phi)  # Tangential direction
-
-        return qn, qt
-
-    def get_surface_load(self, phi):
-        """
-        Calculate surface line loads.
-
-        Arguments
-        ---------
-        phi : float
-            Inclination (degrees). Counterclockwise positive.
-
-        Returns
-        -------
-        pn : float
-            Surface line load (N/mm) in normal direction.
-        pt : float
-            Surface line load (N/mm) in tangential direction.
-        """
-        # Convert units
-        phi = np.deg2rad(phi)  # Convert inclination to rad
-        # Split into components
-        pn = self.p * np.cos(phi)  # Normal direction
-        pt = -self.p * np.sin(phi)  # Tangential direction
-
-        return pn, pt
-
-    def get_skier_load(self, m, phi):
-        """
-        Calculate skier point load.
-
-        Arguments
-        ---------
-        m : float
-            Skier weight (kg).
-        phi : float
-            Inclination (degrees). Counterclockwise positive.
-
-        Returns
-        -------
-        Fn : float
-            Skier load (N) in normal direction.
-        Ft : float
-            Skier load (N) in tangential direction.
-        """
-        phi = np.deg2rad(phi)  # Convert inclination to rad
-        F = 1e-3 * np.array(m) * self.g / self.lski  # Total skier load (N)
-        Fn = F * np.cos(phi)  # Normal skier load (N)
-        Ft = -F * np.sin(phi)  # Tangential skier load (N)
-
-        return Fn, Ft
-
-    def zh(self, x, l=0, bed=True):
-        """
-        Compute bedded or free complementary solution at position x.
-
-        Arguments
-        ---------
-        x : float
-            Horizontal coordinate (mm).
-        l : float, optional
-            Segment length (mm). Default is 0.
-        bed : bool
-            Indicates whether segment has foundation or not. Default
-            is True.
-
-        Returns
-        -------
-        zh : ndarray
-            Complementary solution matrix (6x6) at position x.
-        """
-        if bed:
-            zh = np.concatenate(
-                [
-                    # Real
-                    self.evR * np.exp(self.ewR * (x + l * self.sR)),
-                    # Complex
-                    np.exp(self.ewC.real * (x + l * self.sC))
-                    * (
-                        self.evC.real * np.cos(self.ewC.imag * x)
-                        - self.evC.imag * np.sin(self.ewC.imag * x)
-                    ),
-                    # Complex
-                    np.exp(self.ewC.real * (x + l * self.sC))
-                    * (
-                        self.evC.imag * np.cos(self.ewC.imag * x)
-                        + self.evC.real * np.sin(self.ewC.imag * x)
-                    ),
-                ],
-                axis=1,
-            )
-        else:
-            # Abbreviations
-            H14 = 3 * self.B11 / self.A11 * x**2
-            H24 = 6 * self.B11 / self.A11 * x
-            H54 = -3 * x**2 + 6 * self.K0 / (self.A11 * self.kA55)
-            # Complementary solution matrix of free segments
-            zh = np.array(
-                [
-                    [0, 0, 0, H14, 1, x],
-                    [0, 0, 0, H24, 0, 1],
-                    [1, x, x**2, x**3, 0, 0],
-                    [0, 1, 2 * x, 3 * x**2, 0, 0],
-                    [0, -1, -2 * x, H54, 0, 0],
-                    [0, 0, -2, -6 * x, 0, 0],
-                ]
-            )
-
-        return zh
-
-    def zp(self, x, phi, bed=True):
-        """
-        Compute bedded or free particular integrals at position x.
-
-        Arguments
-        ---------
-        x : float
-            Horizontal coordinate (mm).
-        phi : float
-            Inclination (degrees).
-        bed : bool
-            Indicates whether segment has foundation (True) or not
-            (False). Default is True.
-
-        Returns
-        -------
-        zp : ndarray
-            Particular integral vector (6x1) at position x.
-        """
-        # Get weight and surface loads
-        qn, qt = self.get_weight_load(phi)
-        pn, pt = self.get_surface_load(phi)
-
-        # Set foundation stiffnesses
-        kn = self.kn
-        kt = self.kt
-
-        # Unpack laminate stiffnesses
-        A11 = self.A11
-        B11 = self.B11
-        kA55 = self.kA55
-        K0 = self.K0
-
-        # Unpack geometric properties
-        h = self.h
-        t = self.t
-        zs = self.zs
-
-        # Assemble particular integral vectors
-        if bed:
-            zp = np.array(
-                [
-                    [
-                        (qt + pt) / kt
-                        + h * qt * (h + t - 2 * zs) / (4 * kA55)
-                        + h * pt * (2 * h + t) / (4 * kA55)
-                    ],
-                    [0],
-                    [(qn + pn) / kn],
-                    [0],
-                    [-(qt * (h + t - 2 * zs) + pt * (2 * h + t)) / (2 * kA55)],
-                    [0],
-                ]
-            )
-        else:
-            zp = np.array(
-                [
-                    [(-3 * (qt + pt) / A11 - B11 * (qn + pn) * x / K0) / 6 * x**2],
-                    [(-2 * (qt + pt) / A11 - B11 * (qn + pn) * x / K0) / 2 * x],
-                    [-A11 * (qn + pn) * x**4 / (24 * K0)],
-                    [-A11 * (qn + pn) * x**3 / (6 * K0)],
-                    [
-                        A11 * (qn + pn) * x**3 / (6 * K0)
-                        + ((zs - B11 / A11) * qt - h * pt / 2 - (qn + pn) * x) / kA55
-                    ],
-                    [(qn + pn) * (A11 * x**2 / (2 * K0) - 1 / kA55)],
-                ]
-            )
-
-        return zp
-
-    def z(self, x, C, l, phi, bed=True):
-        """
-        Assemble solution vector at positions x.
-
-        Arguments
-        ---------
-        x : float or squence
-            Horizontal coordinate (mm). Can be sequence of length N.
-        C : ndarray
-            Vector of constants (6xN) at positions x.
-        l : float
-            Segment length (mm).
-        phi : float
-            Inclination (degrees).
-        bed : bool
-            Indicates whether segment has foundation (True) or not
-            (False). Default is True.
-
-        Returns
-        -------
-        z : ndarray
-            Solution vector (6xN) at position x.
-        """
-        if isinstance(x, (list, tuple, np.ndarray)):
-            z = np.concatenate(
-                [np.dot(self.zh(xi, l, bed), C) + self.zp(xi, phi, bed) for xi in x],
-                axis=1,
-            )
-        else:
-            z = np.dot(self.zh(x, l, bed), C) + self.zp(x, phi, bed)
-
-        return z

weac/inverse.py

@@ -1,51 +0,0 @@
-"""Class for the elastic analysis of layered snow slabs."""
-# pylint: disable=invalid-name
-
-# Project imports
-from weac.eigensystem import Eigensystem
-from weac.mixins import AnalysisMixin, FieldQuantitiesMixin, OutputMixin, SolutionMixin
-
-
-class Inverse(
-    FieldQuantitiesMixin, SolutionMixin, AnalysisMixin, OutputMixin, Eigensystem
-):
-    """
-    Fit the elastic properties of the layers of a snowpack.
-
-    Allows for the inverse identification of the elastic properties
-    of the layers of a snowpack from full-field displacement
-    measurements.
-
-    Inherits methods for the eigensystem calculation from the base
-    class Eigensystem(), methods for the calculation of field
-    quantities from FieldQuantitiesMixin(), methods for the solution
-    of the system from SolutionMixin() and methods for the output
-    analysis from AnalysisMixin().
-    """
-
-    def __init__(self, system="pst-", layers=None, parameters=(6.0, 4.6, 0.25)):
-        """
-        Initialize model with user input.
-
-        Arguments
-        ---------
-        system : str, optional
-            Type of system to analyse. Default is 'pst-'.
-        layers : list, optional
-            List of layer densities and thicknesses. Default is None.
-        parameters : tuple, optional
-            Fitting parameters C0, C1, and Eweak. Multiplicative constant
-            of Young modulus parametrization, exponent constant of Young
-            modulus parametrization, and weak-layer Young modulus,
-            respectively. Default is (6.0, 4.6, 0.25).
-        """
-        # Call parent __init__
-        super().__init__(system=system)
-
-        # Unpack fitting parameters
-        C0, C1, Eweak = parameters
-
-        # Set material properties and set up model
-        self.set_beam_properties(layers=layers, C0=C0, C1=C1)
-        self.set_foundation_properties(E=Eweak)
-        self.calc_fundamental_system()