snappy 3.1__cp39-cp39-win_amd64.whl → 3.2__cp39-cp39-win_amd64.whl

snappy/geometric_structure/geodesic/avoid_core_curves.py

@@ -0,0 +1,369 @@
+from ...tiling.lifted_tetrahedron import LiftedTetrahedron
+from ...hyperboloid.line import R13Line
+from ...hyperboloid.distances import distance_r13_lines, distance_r13_point_line
+from ...hyperboloid import r13_dot, time_r13_normalise, space_r13_normalise
+from ...snap.t3mlite import Tetrahedron, simplex
+from ...math_basics import correct_min, correct_max
+from ...exceptions import InsufficientPrecisionError
+from ...matrix import make_identity_matrix
+
+from .graph_trace_helper import find_lifted_tetrahedra_containing_point
+from . import constants
+from . import exceptions
+
+from typing import Optional, Tuple, Any, Sequence
+
+"""
+A geodesic intersecting one core curve:
+gLLPQcdefeffpvauppb_acbBbBaaBbacbBa(0,0)(0,0)(1,0)
+
+A geodesic intersecting two core curves:
+mvLAPvMQQcedggikjlklkloboppbaapuaob_acbdBbBaBaaBCBbacbbb(0,0)(0,0)(1,0)(1,0)
+"""
+
+def replace_piece_in_core_curve_tube(
+        lifted_tetrahedron : LiftedTetrahedron,
+        geodesic : R13Line,
+        inverse_lifted_geodesic : R13Line,
+        verified : bool) -> Optional[Sequence[LiftedTetrahedron]]:
+    """
+    Computes the intersection of the given geodesic with the lifted_tetrahedron.
+
+    If the intersection can be verified to lie entirely in an embedded tube
+    about a (lifted) core curve, then it computes the intersection points of
+    the geodesic with the boundary of the tube and returns lifted tetrahedra
+    guaranteed to contain those intersection points. Otherwise, returns None.
+
+    Note that the function also requires the inverse_lifted_geodesic, that is
+    the geodesic transformed by o13_inverse(lifted_tetrahedron.o13_matrix).
+    This input is redundant but used to speed up the computation.
+
+    There are two applications two this function:
+
+    1. Draw a geodesic intersecting several core curves in the inside view.
+       We cannot draw the infinitely many pieces required to draw the entire
+       geodesic. Thus, we use this function when tiling about the geodesic.
+       The tiling with the one lifted tetrahedron or two lifted tetrahedra
+       containing some point on the geodesic. Once we have a piece of the
+       geodesic completely inside the tube about the core curve, we do not
+       continue with the neighboring tetrahedra. Instead, we graph trace here
+       our way out of the tube and continue tiling on the other side of the
+       tube.
+
+       Technically speaking, this function returns lifted tetrahedra
+       to continue to either side of the intersection of the tube with the
+       geodesic. But the side from which we came will already be marked as
+       visited and quickly be discarded.
+
+       Also note that if the geodesic intersects only one core curve, this
+       function could just drop the piece instead of continuing on the other
+       side of the intersection of the geodesic with the core curve. That is
+       because we are approaching this intersection from both sides already.
+
+       Thus, to really test this function in the inside view, one has two
+       have an example of a geodesic intersecting at least two distinct
+       core curves.
+
+    2. Arguably, the more important application is for de-duplicating geodesics
+       during the length spectrum computation.
+
+       This de-duplication works by computing the intersection of the geodesic
+       with the tetrahedra in the fundamental domain. That is, we consider all
+       lifts of the geodesic in H^3 and see how they intersect the fundamental
+       domain.
+
+       We do this again by tiling about the geodesic in H^3.
+
+       We do not need all the intersections of the geodesic with the tetrahedra
+       in the fundamental domain. In particular, we can drop all the pieces of
+       geodesic completely contained in a tube about a core curve. Provided that
+       the system of tubes we pick is embedded. This is because a geodesic
+       entirely contained in an embedded tube would be homotopic to the core
+       curve. And we enumerate core curves during the length spectrum
+       computation separately already.
+    """
+
+    tet = lifted_tetrahedron.tet
+    m = lifted_tetrahedron.o13_matrix
+
+    v : Optional[int] = _vertex_of_core_curve_tube_containing_geodesic_piece(
+        tet, inverse_lifted_geodesic, verified)
+    if v is None:
+        return None
+
+    core_curve : R13Line = tet.core_curves[v].r13_line
+    lifted_core_curve : R13Line = core_curve.transformed(m)
+    r = tet.Class[v].core_curve_tube_radius
+
+    # The intersection points of the geodesic with the boundary
+    # of the tube about the core curve.
+    #
+    # Note that _vertex_of_core_curve_tube_containing_geodesic_piece already
+    # checked that the geodesic intersects the tube.
+    #
+    points = _compute_intersection_points_geodesic_and_tube(
+        geodesic,
+        lifted_core_curve, r)
+
+    # Find lifted tetrahedra containing those intersection points.
+    return [
+        new_lifted_tetrahedron
+        for point in points
+        for new_lifted_tetrahedron in _graph_trace(
+                tet, point, verified) ]
+
+def _vertex_of_core_curve_tube_containing_geodesic_piece(
+        tet : Tetrahedron,
+        geodesic : R13Line,
+        verified : bool) -> Optional[int]:
+    """
+    Can the intersection of the geodesic with the given tetrahedron be
+    verified to be entirely contained in a core curve associated with one of
+    the vertices of the tetrahedron?
+
+    Is yes, return that vertex (as element in simplex.ZeroSubsimplices).
+    Otherwise, return None.
+    """
+
+    # Before doing the expensive computation of the intersection of the
+    # geodesic with the tetrahedron, check whether the geodesic as a whole
+    # is intersecting the tube.
+    #
+    # Note that when in doubt (intervals too big), it is better to
+    # fail claiming this piece is not contained in the core curve
+    # tube.
+    #
+    # Elements of simplex.ZeroSubsimplices corresponding to candidate core
+    # curve tubes.
+    #
+    candidate_vertices : Sequence[int] = [
+        v
+        for v, core_curve in tet.core_curves.items()
+        if distance_r13_lines(geodesic, core_curve.r13_line) < (
+                tet.Class[v].core_curve_tube_radius) ]
+
+    if len(candidate_vertices) == 0:
+        return None
+
+    # Compute intersection points of geodesic with tetrahedron.
+    points : Optional[Sequence[Any]] = (
+        _compute_intersection_points_geodesic_and_tet(
+            geodesic, tet, verified))
+    if points is None:
+        # Geodesic not intersecting tetrahedron.
+        # Or we could not verify the intersection points.
+        return None
+
+    for v in candidate_vertices:
+        # Both points must be inside the core curve tube.
+        core_curve = tet.core_curves[v]
+        r =  tet.Class[v].core_curve_tube_radius
+        if all(distance_r13_point_line(point, core_curve.r13_line) < r
+               for point in points):
+            return v
+
+    return None
+
+def _compute_intersection_points_geodesic_and_tet(
+        geodesic : R13Line,
+        tet : Tetrahedron,
+        verified : bool) -> Optional[Sequence[Any]]:
+    """
+    Intersection points of geodesic with the tetrahedron.
+    Returns either two points or nothing if the geodesic does not
+    intersect the tetrahedron or could not be verified to intersect the
+    tetrahedron.
+    """
+
+    if verified:
+        epsilon = 0
+    else:
+        epsilon = 1e-5
+
+    # We parametrize the geodesic as point0 + p * direction.
+    # Note that to determine whether a point is in a plane, we do
+    # not need to normalize the vector associated with the point.
+    point0    = geodesic.points[0]
+    point1    = geodesic.points[1]
+    direction = point1 - point0
+
+    # For each half-space defined by a tetrahedron plane, we say that
+    # the geodesic is entering if it starts outside of the half-space
+    # and ends in the half-space. Exit in the opposite case. Record the
+    # parameter at which time the geodesic crosses the plane in each case.
+    #
+    enter_params = []
+    exit_params  = []
+
+    for plane in tet.R13_unnormalised_planes.values():
+        # Sign tells us whether start/end point of geodesic is in that
+        # half-space.
+        d0 = r13_dot(point0, plane)
+        d1 = r13_dot(point1, plane)
+
+        d0_out = d0 >  epsilon
+        d1_out = d1 >  epsilon
+
+        if d0_out and d1_out:
+            # Geodesic entirely outside of tetrahedron. Bail.
+            return None
+
+        d0_in  = d0 < -epsilon
+        d1_in  = d1 < -epsilon
+
+        if d0_in and d1_out:
+            exit_params .append(-d0 / r13_dot(plane, direction))
+
+        if d1_in and d0_out:
+            enter_params.append(-d0 / r13_dot(plane, direction))
+
+        # If ambiguous, do not enter to either exit or enter parameters.
+        # Note that this can happen if the geodesic is inside one of the
+        # planes supporting the faces of the tetrahedron.
+        #
+        # In that case, we ignore that plane when computing the intersection.
+        #
+        # It is ok to compute a larger intersection: that will just mean that
+        # we might not be able to verify a piece to be entirely contained in
+        # the core curve tube.
+
+    if len(exit_params) == 0:
+        raise InsufficientPrecisionError(
+            "When computing intersection of geodesic with tetrahedron, could "
+            "not determine how geodesic exited tetrahedron. Increasing "
+            "precision should fix this.")
+    if len(enter_params) == 0:
+        raise InsufficientPrecisionError(
+            "When computing intersection of geodesic with tetrahedron, could "
+            "not determine how geodesic exited tetrahedron. Increasing "
+            "precision should fix this.")
+
+    enter_param = correct_max(enter_params)
+    exit_param  = correct_min(exit_params)
+
+    if not enter_param < exit_param:
+        # We cannot compute the intersection. Bail.
+        return None
+
+    return [
+        time_r13_normalise(point0 + param * direction)
+        for param in [ enter_param, exit_param ]]
+
+def _compute_intersection_points_geodesic_and_tube(
+        geodesic : R13Line,
+
+        core_geodesic : R13Line,
+        tube_radius) -> Sequence[Any]:
+    """
+    Compute intersection points of geodesic with boundary of tube above
+    core_geodesic with radius tube_radius.
+
+    Assumes that the geodesic actually intersects the tube.
+    """
+
+    # We parametrize the geodesic by
+    # r(t) = ((1 - t) * geodesic.points[0] + (1 + t) * geodesic.points[1]) / 2
+    #
+    # Note that
+    #    r(t) * r(t) = geodesic.points[0] * geodesic.points[1] * (1 - t^2) / -2
+    #
+    # We need to solve for t in
+    #        d(time_r13_normalise(r(t)), core_geodesic) = tube_radius
+    # which gives a quadratic equation.
+
+    start0_dot = r13_dot(geodesic.points[0], core_geodesic.points[0])
+    start1_dot = r13_dot(geodesic.points[0], core_geodesic.points[1])
+    end0_dot   = r13_dot(geodesic.points[1], core_geodesic.points[0])
+    end1_dot   = r13_dot(geodesic.points[1], core_geodesic.points[1])
+
+    p = (tube_radius.cosh() ** 2 *
+         geodesic.inner_product * core_geodesic.inner_product)
+    s =  start0_dot * start1_dot
+    e =    end0_dot *   end1_dot
+    m = (start0_dot *   end1_dot +
+         start1_dot *   end0_dot)
+
+    se = s + e
+    m_minus_p = m - p
+
+    return [
+        time_r13_normalise((1 - t) * geodesic.points[0] +
+                           (1 + t) * geodesic.points[1])
+        for t in _solve_quadratic( m_minus_p - se,
+                                  2 * (s - e),
+                                  -m_minus_p - se) ]
+
+def _solve_quadratic(a, b, c):
+    """
+    Returns the two real solutions to a * t^2 + b * t + c = 0.
+    """
+
+    d = b * b - 4 * a * c
+
+    if not d > 0:
+        raise InsufficientPrecisionError(
+            "Discriminant of quadratic equation to solve intersection with "
+            "core curve tube could not be verified to be positive. "
+            "Increasing precision should fix this.")
+
+    sqrt_d = d.sqrt()
+
+    return [ (-b + s * sqrt_d) / ( 2 * a)
+             for s in [ +1, -1 ] ]
+
+def _graph_trace(tet : Tetrahedron,
+                 lifted_pt,
+                 verified : bool) -> Sequence[LiftedTetrahedron]:
+    """
+    Given some tetrahedron, find one tetrahedron or two lifted tetrahedra
+    containing the given lifted_pt.
+    """
+
+    # Similar to GeodesicStartPointInfo._graph_trace
+
+    RF = lifted_pt[0].parent()
+    if verified:
+        epsilon = 0
+        def key(face_and_signed_distance):
+            return face_and_signed_distance[1].center()
+    else:
+        epsilon = _compute_epsilon(RF)
+        def key(face_and_signed_distance):
+            return face_and_signed_distance[1]
+
+    m = make_identity_matrix(ring=RF, n=4)
+
+    entry_cell = simplex.T
+    for i in range(constants.graph_trace_max_steps):
+        faces_and_signed_distances = [
+            (face, r13_dot(lifted_pt, tet.R13_planes[face]))
+        for face in simplex.TwoSubsimplices ]
+
+        if not any( signed_distance > epsilon
+                    for face, signed_distance
+                    in faces_and_signed_distances ):
+            return find_lifted_tetrahedra_containing_point(
+                LiftedTetrahedron(tet, m),
+                faces_and_signed_distances,
+                lifted_pt,
+                epsilon)
+
+        face, worst_distance = max(
+            [ face_and_signed_distance
+              for face_and_signed_distance in faces_and_signed_distances
+              if face_and_signed_distance[0] != entry_cell ],
+            key=key)
+
+        lifted_pt = tet.O13_matrices[face] * lifted_pt
+        entry_cell = tet.Gluing[face].image(face)
+        tet = tet.Neighbor[face]
+        m = m * tet.O13_matrices[entry_cell]
+
+    raise exceptions.UnfinishedGraphTraceGeodesicError(
+        constants.graph_trace_max_steps)
+
+def _compute_epsilon(RF):
+    return RF(0.5) ** (RF.prec() // 2)
+
+def _make_unit_tangent_vector(point, direction):
+    return space_r13_normalise(direction + r13_dot(direction, point) * point)

snappy/geometric_structure/geodesic/canonical_keys.py

@@ -0,0 +1,52 @@
+from .line import R13LineWithMatrix
+from ...tiling.floor import floor_as_integers
+
+from ...matrix import make_identity_matrix # type: ignore
+from ...hyperboloid import r13_dot, o13_inverse # type: ignore
+from ...hyperboloid.line import R13Line
+
+def canonical_keys_function_for_line(line_with_matrix : R13LineWithMatrix):
+
+    line : R13Line = line_with_matrix.r13_line
+    m = line_with_matrix.o13_matrix
+
+    pt = line.points[0]
+    a = pt[0]
+    b = (m * pt)[0]
+    log_scale_factor = 2 * (b / a).log()
+
+    power_cache = _O13MatrixPowerCache(m)
+    
+    def result(point):
+        a = r13_dot(point, line.points[0])
+        b = r13_dot(point, line.points[1])
+
+        r = (a / b).log() / log_scale_factor
+
+        return [ power_cache.power(i) * point
+                 for i in floor_as_integers(r) ]
+
+    return result
+
+class _O13MatrixPowerCache:
+    def __init__(self, m):
+        self._positive_cache = _MatrixNonNegativePowerCache(m)
+        self._negative_cache = _MatrixNonNegativePowerCache(o13_inverse(m))
+
+    def power(self, i):
+        if i >= 0:
+            return self._positive_cache.power( i)
+        else:
+            return self._negative_cache.power(-i)
+
+
+class _MatrixNonNegativePowerCache:
+    def __init__(self, m):
+        self._m = m
+        self._powers = [ make_identity_matrix(ring=m.base_ring(),
+                                              n=m.dimensions()[0]) ]
+
+    def power(self, i):
+        while not i < len(self._powers):
+            self._powers.append(self._m * self._powers[-1])
+        return self._powers[i]

snappy/geometric_structure/geodesic/check_away_from_core_curve.py

@@ -0,0 +1,60 @@
+from .line import R13LineWithMatrix
+
+from ...snap.t3mlite import simplex, Tetrahedron
+from ...hyperboloid.distances import distance_r13_lines
+from ...hyperboloid.line import R13Line
+
+from typing import Optional
+
+class ObjectCloseToCoreCurve(RuntimeError):
+    def __init__(self, obj_name, cusp_index, distance):
+        self.obj_name = obj_name
+        self.cusp_index = cusp_index
+        self.distance = distance
+        s = self.obj_name if self.obj_name else "Given geometric object"
+        super().__init__(
+            "%s is very close to the core curve "
+            "of cusp %d and might intersect it. Distance: %r." % (
+                s, cusp_index, distance))
+
+def check_away_from_core_curve_iter(iterator, epsilon, obj_name = None):
+    for tile in iterator:
+        check_away_from_core_curve(
+            tile.inverse_lifted_geometric_object,
+            tile.lifted_tetrahedron.tet,
+            simplex.T,
+            epsilon,
+            obj_name)
+
+        yield tile
+
+def check_away_from_core_curve(line : R13Line,
+                               tet : Tetrahedron,
+                               subsimplex : int,
+                               epsilon,
+                               obj_name = None):
+    """
+    If the geodesic is intersecting a core curve, the tracing would
+    fail in that it would never reach the intersection point and thus
+    either hit the iteration limit or breaking down because of
+    rounding-errors.
+
+    This function is catching this case to give a meaningful exception
+    faster. It does so by computing the distance between the lift of
+    the geodesic we are tracing and the lifts of the core curve
+    corresponding to the vertices of the tetrahedra adjacent to the
+    given face.
+    """
+
+    for v in simplex.ZeroSubsimplices:
+        if not simplex.is_subset(v, subsimplex):
+            continue
+        core_curve : Optional[R13LineWithMatrix] = tet.core_curves.get(v, None)
+        if core_curve is None:
+            continue
+        d = distance_r13_lines(
+            core_curve.r13_line,
+            line)
+        if not d > epsilon:
+            raise ObjectCloseToCoreCurve(
+                obj_name, tet.Class[v].Index, d)

snappy/geometric_structure/geodesic/constants.py

@@ -0,0 +1,6 @@
+graph_trace_max_steps = 300
+
+start_point_bias = 1.2498653253
+
+
+

snappy/geometric_structure/geodesic/exceptions.py

@@ -0,0 +1,22 @@
+class WordAppearsToBeParabolic(RuntimeError):
+    def __init__(self, word, trace):
+        self.word = word
+        self.trace = trace
+        super().__init__(
+            "Attempting to drill a geodesic corresponding to a matrix "
+            "that could be parabolic. "
+            "Word: %s, trace: %r." % (word, trace))
+
+class UnfinishedGraphTraceGeodesicError(RuntimeError):
+    def __init__(self, steps):
+        self.steps = steps
+        super().__init__(
+            "The line fixed by the given word could not be moved (by "
+            "Decktransformations) to intersect the fundamental domain after "
+            "%d steps.\n"
+            "This is probably due to a pathology, e.g., a bad conjugate "
+            "was picked and the line is very far away from the fundamental "
+            "domain or the given geodesic is very close to a core curve of "
+            "a filled cusp.\n"
+            "If not a verified computation, it might be due to insufficient "
+            "pecision." % steps)

snappy/{drilling → geometric_structure/geodesic}/fixed_points.py

@@ -1,10 +1,13 @@
-from ..upper_halfspace import psl2c_to_o13 # type: ignore
-from ..upper_halfspace.ideal_point import ideal_point_to_r13 # type: ignore
-from ..matrix import matrix # type: ignore
-from ..math_basics import is_RealIntervalFieldElement # type: ignore
-
-__all__ = ['r13_fixed_points_of_psl2c_matrix']
+from .line import R13LineWithMatrix
+from ...hyperboloid.line import R13Line
+from ...upper_halfspace import psl2c_to_o13, complex_length_of_psl2c_matrix # type: ignore
+from ...upper_halfspace.ideal_point import ideal_point_to_r13 # type: ignore
+from ...matrix import make_matrix # type: ignore
+from ...math_basics import (is_RealIntervalFieldElement,
+                            is_ComplexIntervalFieldElement) # type: ignore
 
+__all__ = ['r13_fixed_points_of_psl2c_matrix',
+           'r13_fixed_line_of_psl2c_matrix']
 
 def r13_fixed_points_of_psl2c_matrix(m):
     """
@@ -31,14 +34,27 @@ def r13_fixed_points_of_psl2c_matrix(m):
         if e0 > e1:
             return _r13_fixed_points_of_psl2c_matrix(m)
 
-    t = matrix([[ 1, 0],[ 1, 1]], ring=m.base_ring())
-    tinv = matrix([[ 1, 0],[-1, 1]], ring=m.base_ring())
+    t = make_matrix([[ 1, 0],[ 1, 1]], ring=m.base_ring())
+    tinv = make_matrix([[ 1, 0],[-1, 1]], ring=m.base_ring())
 
     pts = _r13_fixed_points_of_psl2c_matrix(tinv * m * t)
     o13_t = psl2c_to_o13(t)
 
     return [ o13_t * pt for pt in pts ]
 
+
+def r13_fixed_line_of_psl2c_matrix(m) -> R13LineWithMatrix:
+    """
+    Given a loxodromic PSL(2,C)-matrix m, returns the line (together
+    with the O(1,3)-matrix corresponding to m) fixed by m in
+    the hyperboloid model.
+    """
+
+    return R13LineWithMatrix(
+        R13Line(r13_fixed_points_of_psl2c_matrix(m)),
+        psl2c_to_o13(m),
+        complex_length_of_psl2c_matrix(m))
+
 ###############################################################################
 # Helpers
 
@@ -64,5 +80,14 @@ def _complex_fixed_points_of_psl2c_matrix(m):
     c = -m[0, 1]
 
     # Use usual formula z = (-b +/- sqrt(b^2 - 4 * a * c)) / (2 * a)
-    d = (b * b - 4 * a * c).sqrt()
+    d = _safe_complex_sqrt(b * b - 4 * a * c)
     return [ (-b + s * d) / (2 * a) for s in [+1, -1] ]
+
+def _safe_complex_sqrt(z):
+    if is_ComplexIntervalFieldElement(z):
+        if z.contains_zero():
+            CIF = z.parent()
+            m = z.abs().sqrt().upper()
+            return CIF((-m, m), (-m, m))
+
+    return z.sqrt()