quantcore-circuits 0.0.1__py3-none-any.whl

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (272) hide show
  1. quantcore_circuits/__init__.py +57 -0
  2. quantcore_circuits/analysis/__init__.py +12 -0
  3. quantcore_circuits/analysis/_metal.py +70 -0
  4. quantcore_circuits/analysis/amplifiers.py +263 -0
  5. quantcore_circuits/analysis/circuits.py +117 -0
  6. quantcore_circuits/analysis/epr.py +231 -0
  7. quantcore_circuits/analysis/epr_lumped.py +372 -0
  8. quantcore_circuits/analysis/extract.py +119 -0
  9. quantcore_circuits/analysis/lom.py +80 -0
  10. quantcore_circuits/analysis/results.py +549 -0
  11. quantcore_circuits/analysis/store.py +81 -0
  12. quantcore_circuits/analysis/synthesis.py +118 -0
  13. quantcore_circuits/analysis/transmon.py +126 -0
  14. quantcore_circuits/assembly/__init__.py +17 -0
  15. quantcore_circuits/assembly/builder.py +127 -0
  16. quantcore_circuits/assembly/drc.py +683 -0
  17. quantcore_circuits/assembly/last_good.py +137 -0
  18. quantcore_circuits/assembly/netlist.py +174 -0
  19. quantcore_circuits/assembly/plan.py +605 -0
  20. quantcore_circuits/assembly/sidecar.py +270 -0
  21. quantcore_circuits/autotrack.py +605 -0
  22. quantcore_circuits/cards.py +878 -0
  23. quantcore_circuits/circuit/__init__.py +14 -0
  24. quantcore_circuits/circuit/adapters.py +305 -0
  25. quantcore_circuits/circuit/bridges.py +353 -0
  26. quantcore_circuits/circuit/consensus.py +158 -0
  27. quantcore_circuits/circuit/derive.py +28 -0
  28. quantcore_circuits/circuit/draw.py +198 -0
  29. quantcore_circuits/circuit/fill.py +828 -0
  30. quantcore_circuits/circuit/hamiltonian.py +193 -0
  31. quantcore_circuits/circuit/kinetic.py +102 -0
  32. quantcore_circuits/circuit/schema.py +139 -0
  33. quantcore_circuits/cli.py +1085 -0
  34. quantcore_circuits/codesign.py +1038 -0
  35. quantcore_circuits/data/selftest_q1_r1.json +44 -0
  36. quantcore_circuits/design/__init__.py +44 -0
  37. quantcore_circuits/design/io.py +98 -0
  38. quantcore_circuits/design/pyscript.py +395 -0
  39. quantcore_circuits/design/schema.py +398 -0
  40. quantcore_circuits/designer.py +625 -0
  41. quantcore_circuits/guiflow.py +991 -0
  42. quantcore_circuits/kqc_files.py +208 -0
  43. quantcore_circuits/layouts/__init__.py +118 -0
  44. quantcore_circuits/layouts/catalog.py +520 -0
  45. quantcore_circuits/layouts/chips/__init__.py +0 -0
  46. quantcore_circuits/layouts/chips/design_chip.py +325 -0
  47. quantcore_circuits/layouts/chips/frame.py +235 -0
  48. quantcore_circuits/layouts/junctions/__init__.py +0 -0
  49. quantcore_circuits/layouts/junctions/jj_fingers.py +99 -0
  50. quantcore_circuits/layouts/junctions/legacy_junctions.py +237 -0
  51. quantcore_circuits/layouts/junctions/sim_gap.py +48 -0
  52. quantcore_circuits/layouts/junctions/trilayer.py +541 -0
  53. quantcore_circuits/layouts/metal/__init__.py +105 -0
  54. quantcore_circuits/layouts/metal/component.py +332 -0
  55. quantcore_circuits/layouts/metal/geometry.py +462 -0
  56. quantcore_circuits/layouts/others/__init__.py +0 -0
  57. quantcore_circuits/layouts/others/amplifiers.py +1139 -0
  58. quantcore_circuits/layouts/others/bond_pad.py +119 -0
  59. quantcore_circuits/layouts/others/connector_pads.py +190 -0
  60. quantcore_circuits/layouts/others/couplers.py +21 -0
  61. quantcore_circuits/layouts/others/cpw_segment.py +131 -0
  62. quantcore_circuits/layouts/others/cpwe.py +661 -0
  63. quantcore_circuits/layouts/others/keepout.py +66 -0
  64. quantcore_circuits/layouts/others/legacy_resonators.py +645 -0
  65. quantcore_circuits/layouts/others/markers.py +201 -0
  66. quantcore_circuits/layouts/others/qpdk_cells.py +263 -0
  67. quantcore_circuits/layouts/others/shapes.py +114 -0
  68. quantcore_circuits/layouts/others/spirals.py +140 -0
  69. quantcore_circuits/layouts/others/sqdmetal_cells.py +90 -0
  70. quantcore_circuits/layouts/others/test_pads.py +461 -0
  71. quantcore_circuits/layouts/ports.py +119 -0
  72. quantcore_circuits/layouts/qubits/__init__.py +0 -0
  73. quantcore_circuits/layouts/qubits/legacy_transmon.py +124 -0
  74. quantcore_circuits/layouts/qubits/qpdk_cells.py +374 -0
  75. quantcore_circuits/layouts/qubits/sqdmetal_cells.py +376 -0
  76. quantcore_circuits/layouts/qubits/trilayer_concentric.py +65 -0
  77. quantcore_circuits/layouts/qubits/xmon.py +375 -0
  78. quantcore_circuits/layouts/registry.py +418 -0
  79. quantcore_circuits/layouts/wafers/__init__.py +0 -0
  80. quantcore_circuits/layouts/wafers/fab_export.py +454 -0
  81. quantcore_circuits/layouts/wafers/legacy_wafer.py +111 -0
  82. quantcore_circuits/layouts/wafers/wafer.py +469 -0
  83. quantcore_circuits/live/__init__.py +6 -0
  84. quantcore_circuits/live/klayout.py +225 -0
  85. quantcore_circuits/live/klive.py +61 -0
  86. quantcore_circuits/live/snapshot.py +185 -0
  87. quantcore_circuits/live/watch.py +93 -0
  88. quantcore_circuits/lom/__init__.py +15 -0
  89. quantcore_circuits/lom/builder.py +932 -0
  90. quantcore_circuits/lom/calibration.py +82 -0
  91. quantcore_circuits/lom/estimates.py +235 -0
  92. quantcore_circuits/lom/fragment.py +421 -0
  93. quantcore_circuits/lom/kqc_models.py +734 -0
  94. quantcore_circuits/lom/metal_models.py +917 -0
  95. quantcore_circuits/lom/quantcore_models.py +784 -0
  96. quantcore_circuits/lom/simulate.py +636 -0
  97. quantcore_circuits/lom/synthesize.py +189 -0
  98. quantcore_circuits/loop.py +610 -0
  99. quantcore_circuits/optimise.py +423 -0
  100. quantcore_circuits/pdk/__init__.py +451 -0
  101. quantcore_circuits/plots.py +876 -0
  102. quantcore_circuits/plugins.py +69 -0
  103. quantcore_circuits/review/__init__.py +57 -0
  104. quantcore_circuits/review/server.py +251 -0
  105. quantcore_circuits/review/static/assets/KaTeX_AMS-Regular-BQhdFMY1.woff2 +0 -0
  106. quantcore_circuits/review/static/assets/KaTeX_AMS-Regular-DMm9YOAa.woff +0 -0
  107. quantcore_circuits/review/static/assets/KaTeX_AMS-Regular-DRggAlZN.ttf +0 -0
  108. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Bold-ATXxdsX0.ttf +0 -0
  109. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Bold-BEiXGLvX.woff +0 -0
  110. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Bold-Dq_IR9rO.woff2 +0 -0
  111. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Regular-CTRA-rTL.woff +0 -0
  112. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Regular-Di6jR-x-.woff2 +0 -0
  113. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Regular-wX97UBjC.ttf +0 -0
  114. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Bold-BdnERNNW.ttf +0 -0
  115. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Bold-BsDP51OF.woff +0 -0
  116. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Bold-CL6g_b3V.woff2 +0 -0
  117. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Regular-CB_wures.ttf +0 -0
  118. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Regular-CTYiF6lA.woff2 +0 -0
  119. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Regular-Dxdc4cR9.woff +0 -0
  120. quantcore_circuits/review/static/assets/KaTeX_Main-Bold-Cx986IdX.woff2 +0 -0
  121. quantcore_circuits/review/static/assets/KaTeX_Main-Bold-Jm3AIy58.woff +0 -0
  122. quantcore_circuits/review/static/assets/KaTeX_Main-Bold-waoOVXN0.ttf +0 -0
  123. quantcore_circuits/review/static/assets/KaTeX_Main-BoldItalic-DxDJ3AOS.woff2 +0 -0
  124. quantcore_circuits/review/static/assets/KaTeX_Main-BoldItalic-DzxPMmG6.ttf +0 -0
  125. quantcore_circuits/review/static/assets/KaTeX_Main-BoldItalic-SpSLRI95.woff +0 -0
  126. quantcore_circuits/review/static/assets/KaTeX_Main-Italic-3WenGoN9.ttf +0 -0
  127. quantcore_circuits/review/static/assets/KaTeX_Main-Italic-BMLOBm91.woff +0 -0
  128. quantcore_circuits/review/static/assets/KaTeX_Main-Italic-NWA7e6Wa.woff2 +0 -0
  129. quantcore_circuits/review/static/assets/KaTeX_Main-Regular-B22Nviop.woff2 +0 -0
  130. quantcore_circuits/review/static/assets/KaTeX_Main-Regular-Dr94JaBh.woff +0 -0
  131. quantcore_circuits/review/static/assets/KaTeX_Main-Regular-ypZvNtVU.ttf +0 -0
  132. quantcore_circuits/review/static/assets/KaTeX_Math-BoldItalic-B3XSjfu4.ttf +0 -0
  133. quantcore_circuits/review/static/assets/KaTeX_Math-BoldItalic-CZnvNsCZ.woff2 +0 -0
  134. quantcore_circuits/review/static/assets/KaTeX_Math-BoldItalic-iY-2wyZ7.woff +0 -0
  135. quantcore_circuits/review/static/assets/KaTeX_Math-Italic-DA0__PXp.woff +0 -0
  136. quantcore_circuits/review/static/assets/KaTeX_Math-Italic-flOr_0UB.ttf +0 -0
  137. quantcore_circuits/review/static/assets/KaTeX_Math-Italic-t53AETM-.woff2 +0 -0
  138. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Bold-CFMepnvq.ttf +0 -0
  139. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Bold-D1sUS0GD.woff2 +0 -0
  140. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Bold-DbIhKOiC.woff +0 -0
  141. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Italic-C3H0VqGB.woff2 +0 -0
  142. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Italic-DN2j7dab.woff +0 -0
  143. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Italic-YYjJ1zSn.ttf +0 -0
  144. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Regular-BNo7hRIc.ttf +0 -0
  145. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Regular-CS6fqUqJ.woff +0 -0
  146. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Regular-DDBCnlJ7.woff2 +0 -0
  147. quantcore_circuits/review/static/assets/KaTeX_Script-Regular-C5JkGWo-.ttf +0 -0
  148. quantcore_circuits/review/static/assets/KaTeX_Script-Regular-D3wIWfF6.woff2 +0 -0
  149. quantcore_circuits/review/static/assets/KaTeX_Script-Regular-D5yQViql.woff +0 -0
  150. quantcore_circuits/review/static/assets/KaTeX_Size1-Regular-C195tn64.woff +0 -0
  151. quantcore_circuits/review/static/assets/KaTeX_Size1-Regular-Dbsnue_I.ttf +0 -0
  152. quantcore_circuits/review/static/assets/KaTeX_Size1-Regular-mCD8mA8B.woff2 +0 -0
  153. quantcore_circuits/review/static/assets/KaTeX_Size2-Regular-B7gKUWhC.ttf +0 -0
  154. quantcore_circuits/review/static/assets/KaTeX_Size2-Regular-Dy4dx90m.woff2 +0 -0
  155. quantcore_circuits/review/static/assets/KaTeX_Size2-Regular-oD1tc_U0.woff +0 -0
  156. quantcore_circuits/review/static/assets/KaTeX_Size3-Regular-CTq5MqoE.woff +0 -0
  157. quantcore_circuits/review/static/assets/KaTeX_Size3-Regular-DgpXs0kz.ttf +0 -0
  158. quantcore_circuits/review/static/assets/KaTeX_Size4-Regular-BF-4gkZK.woff +0 -0
  159. quantcore_circuits/review/static/assets/KaTeX_Size4-Regular-DWFBv043.ttf +0 -0
  160. quantcore_circuits/review/static/assets/KaTeX_Size4-Regular-Dl5lxZxV.woff2 +0 -0
  161. quantcore_circuits/review/static/assets/KaTeX_Typewriter-Regular-C0xS9mPB.woff +0 -0
  162. quantcore_circuits/review/static/assets/KaTeX_Typewriter-Regular-CO6r4hn1.woff2 +0 -0
  163. quantcore_circuits/review/static/assets/KaTeX_Typewriter-Regular-D3Ib7_Hf.ttf +0 -0
  164. quantcore_circuits/review/static/assets/index-CDHdrFyA.css +1 -0
  165. quantcore_circuits/review/static/assets/index-CSx05Og4.js +409 -0
  166. quantcore_circuits/review/static/assets/inter-cyrillic-400-normal-HOLc17fK.woff +0 -0
  167. quantcore_circuits/review/static/assets/inter-cyrillic-400-normal-obahsSVq.woff2 +0 -0
  168. quantcore_circuits/review/static/assets/inter-cyrillic-500-normal-BasfLYem.woff2 +0 -0
  169. quantcore_circuits/review/static/assets/inter-cyrillic-500-normal-CxZf_p3X.woff +0 -0
  170. quantcore_circuits/review/static/assets/inter-cyrillic-600-normal-4D_pXhcN.woff +0 -0
  171. quantcore_circuits/review/static/assets/inter-cyrillic-600-normal-CWCymEST.woff2 +0 -0
  172. quantcore_circuits/review/static/assets/inter-cyrillic-700-normal-CjBOestx.woff2 +0 -0
  173. quantcore_circuits/review/static/assets/inter-cyrillic-700-normal-DrXBdSj3.woff +0 -0
  174. quantcore_circuits/review/static/assets/inter-cyrillic-ext-400-normal-BQZuk6qB.woff2 +0 -0
  175. quantcore_circuits/review/static/assets/inter-cyrillic-ext-400-normal-DQukG94-.woff +0 -0
  176. quantcore_circuits/review/static/assets/inter-cyrillic-ext-500-normal-B0yAr1jD.woff2 +0 -0
  177. quantcore_circuits/review/static/assets/inter-cyrillic-ext-500-normal-BmqWE9Dz.woff +0 -0
  178. quantcore_circuits/review/static/assets/inter-cyrillic-ext-600-normal-Bcila6Z-.woff +0 -0
  179. quantcore_circuits/review/static/assets/inter-cyrillic-ext-600-normal-Dfes3d0z.woff2 +0 -0
  180. quantcore_circuits/review/static/assets/inter-cyrillic-ext-700-normal-BjwYoWNd.woff2 +0 -0
  181. quantcore_circuits/review/static/assets/inter-cyrillic-ext-700-normal-LO58E6JB.woff +0 -0
  182. quantcore_circuits/review/static/assets/inter-greek-400-normal-B4URO6DV.woff2 +0 -0
  183. quantcore_circuits/review/static/assets/inter-greek-400-normal-q2sYcFCs.woff +0 -0
  184. quantcore_circuits/review/static/assets/inter-greek-500-normal-BIZE56-Y.woff2 +0 -0
  185. quantcore_circuits/review/static/assets/inter-greek-500-normal-Xzm54t5V.woff +0 -0
  186. quantcore_circuits/review/static/assets/inter-greek-600-normal-BZpKdvQh.woff +0 -0
  187. quantcore_circuits/review/static/assets/inter-greek-600-normal-plRanbMR.woff2 +0 -0
  188. quantcore_circuits/review/static/assets/inter-greek-700-normal-BUv2fZ6O.woff +0 -0
  189. quantcore_circuits/review/static/assets/inter-greek-700-normal-C3JjAnD8.woff2 +0 -0
  190. quantcore_circuits/review/static/assets/inter-greek-ext-400-normal-DGGRlc-M.woff2 +0 -0
  191. quantcore_circuits/review/static/assets/inter-greek-ext-400-normal-KugGGMne.woff +0 -0
  192. quantcore_circuits/review/static/assets/inter-greek-ext-500-normal-2j5mBUwD.woff +0 -0
  193. quantcore_circuits/review/static/assets/inter-greek-ext-500-normal-C4iEst2y.woff2 +0 -0
  194. quantcore_circuits/review/static/assets/inter-greek-ext-600-normal-B8X0CLgF.woff +0 -0
  195. quantcore_circuits/review/static/assets/inter-greek-ext-600-normal-DRtmH8MT.woff2 +0 -0
  196. quantcore_circuits/review/static/assets/inter-greek-ext-700-normal-BoQ6DsYi.woff +0 -0
  197. quantcore_circuits/review/static/assets/inter-greek-ext-700-normal-qfdV9bQt.woff2 +0 -0
  198. quantcore_circuits/review/static/assets/inter-latin-400-normal-C38fXH4l.woff2 +0 -0
  199. quantcore_circuits/review/static/assets/inter-latin-400-normal-CyCys3Eg.woff +0 -0
  200. quantcore_circuits/review/static/assets/inter-latin-500-normal-BL9OpVg8.woff +0 -0
  201. quantcore_circuits/review/static/assets/inter-latin-500-normal-Cerq10X2.woff2 +0 -0
  202. quantcore_circuits/review/static/assets/inter-latin-600-normal-CiBQ2DWP.woff +0 -0
  203. quantcore_circuits/review/static/assets/inter-latin-600-normal-LgqL8muc.woff2 +0 -0
  204. quantcore_circuits/review/static/assets/inter-latin-700-normal-BLAVimhd.woff +0 -0
  205. quantcore_circuits/review/static/assets/inter-latin-700-normal-Yt3aPRUw.woff2 +0 -0
  206. quantcore_circuits/review/static/assets/inter-latin-ext-400-normal-77YHD8bZ.woff +0 -0
  207. quantcore_circuits/review/static/assets/inter-latin-ext-400-normal-C1nco2VV.woff2 +0 -0
  208. quantcore_circuits/review/static/assets/inter-latin-ext-500-normal-BxGbmqWO.woff +0 -0
  209. quantcore_circuits/review/static/assets/inter-latin-ext-500-normal-CV4jyFjo.woff2 +0 -0
  210. quantcore_circuits/review/static/assets/inter-latin-ext-600-normal-CIVaiw4L.woff +0 -0
  211. quantcore_circuits/review/static/assets/inter-latin-ext-600-normal-D2bJ5OIk.woff2 +0 -0
  212. quantcore_circuits/review/static/assets/inter-latin-ext-700-normal-Ca8adRJv.woff2 +0 -0
  213. quantcore_circuits/review/static/assets/inter-latin-ext-700-normal-TidjK2hL.woff +0 -0
  214. quantcore_circuits/review/static/assets/inter-vietnamese-400-normal-Bbgyi5SW.woff +0 -0
  215. quantcore_circuits/review/static/assets/inter-vietnamese-400-normal-DMkecbls.woff2 +0 -0
  216. quantcore_circuits/review/static/assets/inter-vietnamese-500-normal-DOriooB6.woff2 +0 -0
  217. quantcore_circuits/review/static/assets/inter-vietnamese-500-normal-mJboJaSs.woff +0 -0
  218. quantcore_circuits/review/static/assets/inter-vietnamese-600-normal-BuLX-rYi.woff +0 -0
  219. quantcore_circuits/review/static/assets/inter-vietnamese-600-normal-Cc8MFFhd.woff2 +0 -0
  220. quantcore_circuits/review/static/assets/inter-vietnamese-700-normal-BZaoP0fm.woff +0 -0
  221. quantcore_circuits/review/static/assets/inter-vietnamese-700-normal-DlLaEgI2.woff2 +0 -0
  222. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-400-normal-BEIGL1Tu.woff2 +0 -0
  223. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-400-normal-ugxPyKxw.woff +0 -0
  224. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-500-normal-DJqRU3vO.woff +0 -0
  225. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-500-normal-DmUKJPL_.woff2 +0 -0
  226. quantcore_circuits/review/static/assets/jetbrains-mono-greek-400-normal-B9oWc5Lo.woff +0 -0
  227. quantcore_circuits/review/static/assets/jetbrains-mono-greek-400-normal-C190GLew.woff2 +0 -0
  228. quantcore_circuits/review/static/assets/jetbrains-mono-greek-500-normal-D7SFKleX.woff +0 -0
  229. quantcore_circuits/review/static/assets/jetbrains-mono-greek-500-normal-JpySY46c.woff2 +0 -0
  230. quantcore_circuits/review/static/assets/jetbrains-mono-latin-400-normal-6-qcROiO.woff +0 -0
  231. quantcore_circuits/review/static/assets/jetbrains-mono-latin-400-normal-V6pRDFza.woff2 +0 -0
  232. quantcore_circuits/review/static/assets/jetbrains-mono-latin-500-normal-BWZEU5yA.woff2 +0 -0
  233. quantcore_circuits/review/static/assets/jetbrains-mono-latin-500-normal-CJOVTJB7.woff +0 -0
  234. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-400-normal-Bc8Ftmh3.woff2 +0 -0
  235. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-400-normal-fXTG6kC5.woff +0 -0
  236. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-500-normal-Cut-4mMH.woff2 +0 -0
  237. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-500-normal-ckzbgY84.woff +0 -0
  238. quantcore_circuits/review/static/assets/jetbrains-mono-vietnamese-400-normal-CqNFfHCs.woff +0 -0
  239. quantcore_circuits/review/static/assets/jetbrains-mono-vietnamese-500-normal-DNRqzVM1.woff +0 -0
  240. quantcore_circuits/review/static/index.html +14 -0
  241. quantcore_circuits/review/static/logo-quantcore-black.png +0 -0
  242. quantcore_circuits/review/static/logo-quantcore-white.png +0 -0
  243. quantcore_circuits/review/static/sample/chip.png +0 -0
  244. quantcore_circuits/review/static/sample/chip_rev1.png +0 -0
  245. quantcore_circuits/review/static/sample/q1.png +0 -0
  246. quantcore_circuits/review/static/sample/q2.png +0 -0
  247. quantcore_circuits/review/static/sample-state.json +3747 -0
  248. quantcore_circuits/route/__init__.py +5 -0
  249. quantcore_circuits/route/router.py +694 -0
  250. quantcore_circuits/route/waveguide.py +187 -0
  251. quantcore_circuits/selftest.py +224 -0
  252. quantcore_circuits/sim_tools/__init__.py +6 -0
  253. quantcore_circuits/sim_tools/aedt_attach.py +66 -0
  254. quantcore_circuits/sim_tools/aedt_progress.py +224 -0
  255. quantcore_circuits/sim_tools/aedt_project.py +302 -0
  256. quantcore_circuits/sim_tools/aedt_scripts.py +397 -0
  257. quantcore_circuits/sim_tools/aedt_session.py +275 -0
  258. quantcore_circuits/sim_tools/ansys.py +90 -0
  259. quantcore_circuits/sim_tools/builder.py +1690 -0
  260. quantcore_circuits/sim_tools/export.py +470 -0
  261. quantcore_circuits/sim_tools/geometry_check.py +342 -0
  262. quantcore_circuits/sim_tools/hfss.py +583 -0
  263. quantcore_circuits/sim_tools/palace.py +197 -0
  264. quantcore_circuits/sim_tools/runner.py +179 -0
  265. quantcore_circuits/sim_tools/subset.py +364 -0
  266. quantcore_circuits/track.py +671 -0
  267. quantcore_circuits-0.0.1.dist-info/METADATA +204 -0
  268. quantcore_circuits-0.0.1.dist-info/RECORD +272 -0
  269. quantcore_circuits-0.0.1.dist-info/WHEEL +5 -0
  270. quantcore_circuits-0.0.1.dist-info/entry_points.txt +2 -0
  271. quantcore_circuits-0.0.1.dist-info/licenses/LICENSE +674 -0
  272. quantcore_circuits-0.0.1.dist-info/top_level.txt +1 -0
@@ -0,0 +1,784 @@
1
+ """LOM models for Quantcore cells ported from the legacy QWri library and the CPW-E drawing library.
2
+
3
+ Same conventions as :mod:`.kqc_models` (estimates labelled ``analytic`` / ``rough``, see :mod:`.estimates`; FEM
4
+ replaces capacitances by island name ``<inst>.<node>``).
5
+
6
+ ============================================= ====================================================================
7
+ cell lumped model
8
+ ============================================= ====================================================================
9
+ TwoPadTransmon (legacy ``Transmon``) floating: island1 (``left`` pad + lead), island2 (``right``), C to
10
+ ground each, C between, JJ between (``squid_a``/``squid_b`` = the
11
+ junction ends)
12
+ PadCoupler (legacy ``Coupler``) series gap capacitor: π network between ``left`` and ``right``
13
+ ConnectorPad, CpweBondPad 50 Ω port (like BondPad)
14
+ TaperedPad probe pad: C to ground (DC test structure)
15
+ CpwSegment a line between ``a`` and ``b`` (wire when both are connected)
16
+ CoupledResonator, QubitResonator λ/4 line: shorted start (refpoint ``short_end``) → port ``end``;
17
+ its coupler section next to a separate feedline is a ``hanger``
18
+ (declare ``d.couple("K_R1", "R1", "<feedline instance>")``)
19
+ CpwResonator resonator line between ``start`` and ``end`` (both grounded when free)
20
+ CoupledConnector line ``start`` (shorted) → ``end``: λ/4 when ``end`` meets a capacitor
21
+ CpweQuarterWaveResonator λ/4 line, no ports: open coupler arm → shorted end; the arm next to
22
+ a feedline is a ``hanger`` at the open end (declared coupling)
23
+ CpweFingerCapacitor, CpweGapCapacitor π network between ``a`` and ``b``
24
+ CpweFingerLine a wire with the fingers' shunt C to ground
25
+ CpweTaper a pass-through section of the line it joins (``Line.through``)
26
+ CpweOpenEnd zero-length open end: a route into it is an open-ended resonator
27
+ NeckTermination (QPDK) shorted end via taper + neck: the routed line's last section, at its
28
+ inductive equivalent length (``Line.through``, rough)
29
+ CpweMeanderLine resonator line between ``a`` and ``b`` (like KQC ``Meander``)
30
+ SpiralLine (legacy ``draw.spiral``) resonator line ``a`` → ``b`` of the drawn length (open ends when free;
31
+ gap = mean turn spacing, rough; kinetic inductance as a CPW)
32
+ FluxHoleArray, FluxHoles ground perforation: no circuit elements
33
+ WaveguideCoplanarStraight (KQC) bare CPW segment without ports: no circuit elements
34
+ ============================================= ====================================================================
35
+
36
+ Line lengths are the drawn centre lines (the cells' own point functions), so they include tails and necks.
37
+ """
38
+
39
+ from __future__ import annotations
40
+
41
+ import math
42
+ from types import SimpleNamespace
43
+
44
+ from quantcore_circuits.lom import estimates as est
45
+ from quantcore_circuits.lom.fragment import (
46
+ Element,
47
+ Fragment,
48
+ Line,
49
+ cell_params,
50
+ junction_element,
51
+ junction_kind,
52
+ port_resistor,
53
+ register_lom,
54
+ )
55
+
56
+
57
+ def _f(x, default=0.0) -> float:
58
+ try:
59
+ return float(x)
60
+ except (TypeError, ValueError):
61
+ return float(default)
62
+
63
+
64
+ def _C(frag: Fragment, name: str, a: str, b: str, value: dict, knob: str | None = None) -> None:
65
+ frag.elements.append(Element(name, "C", (a, b), value, {"param": knob} if knob else None))
66
+
67
+
68
+ def _knob(frag: Fragment, param: str, value: float) -> None:
69
+ frag.knobs[param] = (round(value * 0.8, 1), round(value * 1.25, 1))
70
+
71
+
72
+ # ---- qubits and couplers ------------------------------------------------------------------------------------------
73
+ def _two_pad_caps(p: dict, eps: float) -> tuple[float, float, str]:
74
+ """(C pad → ground, C pad ↔ pad, formula) of the legacy two-pad drawing: the pads face each other across ``gap``
75
+ along their ``pad_height`` edges; ``pad_thickness`` is their extent along the axis, the lead length the clearance
76
+ behind them and ``pocket_margin`` the clearance above/below (no pocket: the surrounding gap is unknown, 50 µm)."""
77
+ h, t = _f(p.get("pad_height"), 30), _f(p.get("pad_thickness"), 20)
78
+ gap = _f(p.get("gap"), 10)
79
+ gap = 1.0 if gap <= 0 else gap
80
+ margin = _f(p.get("pocket_margin"), 20)
81
+ side = margin if margin > 0 else 50.0
82
+ back = max(_f(p.get("lead_length"), 10), 1.0)
83
+ cg, cm = est.two_pads(h, t, gap, side, back, eps)
84
+ return cg, cm, f"two {t:g}×{h:g} µm pads across {gap:g} µm in a {side:g} µm pocket (coupled strips + CPW)"
85
+
86
+
87
+ @register_lom("TwoPadTransmon")
88
+ def two_pad_transmon_lom(name: str, inst, pdk) -> Fragment:
89
+ """Legacy two-pad transmon: floating, island1 = ``left`` pad, island2 = ``right`` pad, JJ across the gap.
90
+
91
+ The pads alone are small (a few fF): the qubit's C_Σ comes from whatever the leads connect to, so run a C-matrix
92
+ of the assembled qubit to replace these values.
93
+ """
94
+ p = cell_params(inst)
95
+ eps = est.substrate_eps(pdk)
96
+ cg, cm, formula = _two_pad_caps(p, eps)
97
+ frag = Fragment(
98
+ nodes={"island1": {"island": f"{name}.island1"}, "island2": {"island": f"{name}.island2"}},
99
+ port_nodes={"left": "island1", "right": "island2", "squid_a": "island1", "squid_b": "island2"},
100
+ )
101
+ _C(frag, f"C_{name}_1", "island1", "gnd", est.cap(cg, "analytic", formula), f"{name}.pad_height")
102
+ _C(frag, f"C_{name}_2", "island2", "gnd", est.cap(cg, "analytic", formula), f"{name}.pad_height")
103
+ _C(frag, f"C_{name}_12", "island1", "island2", est.cap(cm, "analytic", formula), f"{name}.gap")
104
+ jtype = str(p.get("junction_type") or "No Squid")
105
+ kind = "SQUID" if junction_kind(jtype) == "SQUID" else "JJ" # "No Squid" (legacy): a JJ is assumed
106
+ frag.elements.append(junction_element(name, "island1", "island2", inst, kind, drawn_params=p))
107
+ if jtype in ("No Squid", "Sim"):
108
+ frag.notes.append(f"{name}: no junction drawn (junction_type {jtype!r}); a JJ across the gap is assumed")
109
+ lj = frag.elements[-1].value.get("Lj_nH")
110
+ if lj:
111
+ frag.knobs[f"{name}.junction.Lj_nH"] = (round(lj * 0.5, 3), round(lj * 1.5, 3))
112
+ else:
113
+ frag.notes.append(f"{name}: no junction.Lj_nH in the design; the qubit mode needs one to simulate")
114
+ frag.notes.append(f"{name}: two-pad transmon pads only ({cg + cm:.2g} fF); the leads' loads set C_Σ")
115
+ return frag
116
+
117
+
118
+ @register_lom("PadCoupler")
119
+ def pad_coupler_lom(name: str, inst, pdk) -> Fragment:
120
+ """Legacy gap coupler (two facing pads): series C between ``left`` and ``right``, C to ground at each."""
121
+ p = cell_params(inst)
122
+ eps = est.substrate_eps(pdk)
123
+ cg, cm, formula = _two_pad_caps(p, eps)
124
+ frag = Fragment(
125
+ nodes={"left": {"island": f"{name}.left"}, "right": {"island": f"{name}.right"}},
126
+ port_nodes={"left": "left", "right": "right"},
127
+ )
128
+ _C(frag, f"C_{name}", "left", "right", est.cap(cm, "analytic", formula), f"{name}.gap")
129
+ _C(frag, f"C_{name}_left", "left", "gnd", est.cap(cg, "analytic", formula))
130
+ _C(frag, f"C_{name}_right", "right", "gnd", est.cap(cg, "analytic", formula))
131
+ return frag
132
+
133
+
134
+ # ---- QPDK / SQDMetal re-implementations (layouts/*/qpdk_cells.py, sqdmetal_cells.py) -----------------------------
135
+ EPS0_FF_PER_UM = 8.8541878128e-3 # ε0 in fF/µm
136
+ FLIP_CHIP_GAP_UM = 8.0 # KQC's default chip_distance; PDK v2 has no second face
137
+
138
+
139
+ def _qubit_junction(frag: Fragment, name: str, inst, p: dict, a: str, b: str, note: str = "", kind=None) -> None:
140
+ """J_<name> from ``junction_type`` (``"No Squid"``: none, a note), or of ``kind``, with Lj/Cj from the design's
141
+ ``junction``."""
142
+ kind = kind or junction_kind(p.get("junction_type", "Manhattan"))
143
+ if kind is None:
144
+ frag.notes.append(f"{name}: no junction ({p.get('junction_type')!r}); the islands are not shunted")
145
+ return
146
+ frag.elements.append(junction_element(name, a, b, inst, kind, note, drawn_params=p))
147
+ lj = frag.elements[-1].value.get("Lj_nH")
148
+ if lj:
149
+ frag.knobs[f"{name}.junction.Lj_nH"] = (round(lj * 0.5, 3), round(lj * 1.5, 3))
150
+ else:
151
+ frag.notes.append(f"{name}: no junction.Lj_nH in the design; the qubit mode needs one to simulate")
152
+
153
+
154
+ @register_lom("Flipmon")
155
+ def flipmon_lom(name: str, inst, pdk) -> Fragment:
156
+ """QPDK flipmon: floating; island1 = M1 ring (the coupler plate faces it), island2 = M1 disc + the M2 top disc
157
+ (face 2b1, joined by the indium bump), junction across the disc–ring gap, plate coupler ``cplr`` at ``coupler``.
158
+
159
+ The M2 disc is part of island2: its overlap with the M1 ring across an assumed 8 µm flip-chip vacuum gap (KQC's
160
+ default ``chip_distance``; PDK v2 has no second face and drops 2b1) is a parallel plate C to island1, and its
161
+ edge facing the top-face ground (``m2_etch_extension_gap``) a disc-in-a-gap C to ground (rough, both)."""
162
+ p = cell_params(inst)
163
+ eps = est.substrate_eps(pdk)
164
+ r_d, r_c, w = (
165
+ _f(p.get("inner_circle_radius"), 60),
166
+ _f(p.get("outer_ring_radius"), 110),
167
+ _f(p.get("outer_ring_width"), 60),
168
+ )
169
+ ring_in, ring_out = r_c - w / 2, r_c + w / 2
170
+ g1 = _f(p.get("m1_etch_extension_gap"), 30)
171
+ r_t, g2 = _f(p.get("top_circle_radius"), 110), _f(p.get("m2_etch_extension_gap"), 40)
172
+ frag = Fragment(
173
+ nodes={"island1": {"island": f"{name}.island1"}, "island2": {"island": f"{name}.island2"}},
174
+ port_nodes={"squid_a": "island2", "squid_b": "island1"}, # disc edge / ring edge
175
+ )
176
+ _C(
177
+ frag,
178
+ f"C_{name}_1",
179
+ "island1",
180
+ "gnd",
181
+ est.cap(
182
+ est.ring_to_ground(ring_out, w, g1, eps),
183
+ "analytic",
184
+ f"ring {ring_in:g}–{ring_out:g} µm, outer edge as half CPW ({g1:g} µm gap)",
185
+ ),
186
+ f"{name}.outer_ring_radius",
187
+ )
188
+ _C(
189
+ frag,
190
+ f"C_{name}_12",
191
+ "island1",
192
+ "island2",
193
+ est.cap(
194
+ est.concentric_rings(r_d, ring_in, eps),
195
+ "rough",
196
+ "disc–ring facing edges as coplanar strips along the mean circumference",
197
+ ),
198
+ f"{name}.inner_circle_radius",
199
+ )
200
+ span = ring_out + g1 - r_d
201
+ c2 = est.disk_to_ground(r_d, span, eps) * ((span - w) / span) ** 2
202
+ _C(frag, f"C_{name}_2", "island2", "gnd", est.cap(c2, "rough", "M1 disc to ground screened by the ring"))
203
+ overlap = math.pi * (min(r_t, ring_out) ** 2 - ring_in**2) if r_t > ring_in else 0.0
204
+ if overlap > 0:
205
+ c_flip = EPS0_FF_PER_UM * overlap / FLIP_CHIP_GAP_UM
206
+ _C(
207
+ frag,
208
+ f"C_{name}_12_flip",
209
+ "island1",
210
+ "island2",
211
+ est.cap(
212
+ c_flip,
213
+ "rough",
214
+ f"M2 disc r {r_t:g} over the M1 ring: parallel plate, {overlap:.0f} µm² across an assumed "
215
+ f"{FLIP_CHIP_GAP_UM:g} µm vacuum gap",
216
+ ),
217
+ f"{name}.top_circle_radius",
218
+ )
219
+ _C(
220
+ frag,
221
+ f"C_{name}_2_top",
222
+ "island2",
223
+ "gnd",
224
+ est.cap(
225
+ est.disk_to_ground(r_t, g2, eps),
226
+ "rough",
227
+ f"M2 disc r {r_t:g} in its {g2:g} µm top-face gap (single-face formula)",
228
+ ),
229
+ )
230
+ _qubit_junction(frag, name, inst, p, "island1", "island2")
231
+ if str(p.get("with_coupler", True)).lower() not in ("false", "0"):
232
+ cw, cl = _f(p.get("coupler_width"), 10), _f(p.get("coupler_length"), 58)
233
+ s_in = max(_f(p.get("coupler_offset"), 10) - cw / 2, 0.5)
234
+ s_out = max(ring_out + g1 - (ring_out + s_in + cw), _f(p.get("coupler_etch_margin"), 2))
235
+ frag.nodes["cplr"] = {"island": f"{name}.cplr"}
236
+ frag.port_nodes["coupler"] = "cplr"
237
+ _C(
238
+ frag,
239
+ f"Cg_{name}_cplr",
240
+ "island1",
241
+ "cplr",
242
+ est.cap(
243
+ est.coplanar_coupling(cl, cw, w, s_in, eps),
244
+ "analytic",
245
+ f"plate {cl:g}×{cw:g} µm facing the ring across {s_in:g} µm (CPS)",
246
+ ),
247
+ f"{name}.coupler_length",
248
+ )
249
+ cc = est.pad_to_ground(cl, cw, s_out, s_out, eps, open_edges=1) + est.cpw_line(s_out, 10, 6, eps)
250
+ _C(frag, f"Cc_{name}_cplr", "cplr", "gnd", est.cap(cc, "rough", "plate in the M1 etch + its lead"))
251
+ frag.notes.append(
252
+ f"{name}: M2 top disc (face 2b1) counted in island2 across an assumed {FLIP_CHIP_GAP_UM:g} µm flip-chip gap "
253
+ "(rough; PDK v2 does not fabricate face 2b1); coupler ↔ disc C neglected (screened by the ring)"
254
+ )
255
+ return frag
256
+
257
+
258
+ @register_lom("Gatemon")
259
+ def gatemon_lom(name: str, inst, pdk) -> Fragment:
260
+ """QPDK gatemon: grounded island (``island_size``) in a pocket; the carbon-nanotube weak link to ground is not
261
+ drawn and is modelled as a JJ with the design's ``junction`` values (gate-tunable Lj); ``readout`` is the island
262
+ edge (the island node), ``gate`` a DC gate line with a small C to the island (rough)."""
263
+ p = cell_params(inst)
264
+ eps = est.substrate_eps(pdk)
265
+ size = p.get("island_size") or [150, 150]
266
+ iw, ih = _f(size[0], 150), _f(size[-1], 150)
267
+ side, top = _f(p.get("pocket_gap"), 60), _f(p.get("pocket_gap_top"), 40)
268
+ frag = Fragment(
269
+ nodes={"island": {"island": f"{name}.island"}, "gate": {"island": f"{name}.gate"}},
270
+ port_nodes={"readout": "island", "gate": "gate", "squid_a": "island", "squid_b": "gnd"},
271
+ )
272
+ c_is = est.pad_to_ground(iw, ih, side, (side + top) / 2, eps)
273
+ _C(
274
+ frag,
275
+ f"C_{name}",
276
+ "island",
277
+ "gnd",
278
+ est.cap(
279
+ c_is, "analytic", f"{iw:g}×{ih:g} µm island in its pocket ({side:g} µm sides, {top:g} µm readout side)"
280
+ ),
281
+ f"{name}.island_size",
282
+ )
283
+ _qubit_junction(frag, name, inst, p, "island", "gnd", note="carbon-nanotube weak link (not drawn): a JJ", kind="JJ")
284
+ frag.notes.append(f"{name}: the CNT junction is not drawn; modelled as a JJ with the design's junction values")
285
+ _C(
286
+ frag,
287
+ f"Cgate_{name}",
288
+ "island",
289
+ "gate",
290
+ est.cap(0.2, "rough", "M1 gate tip beside the junction, below the island (rough, ±100 %)"),
291
+ )
292
+ gl = _f(p.get("gate_length"), 50)
293
+ _C(frag, f"C_{name}_gate", "gate", "gnd", est.cap(est.cpw_line(gl + side, 10, 6, eps), "rough", "gate feed CPW"))
294
+ return frag
295
+
296
+
297
+ @register_lom("GatemonCoupler")
298
+ def gatemon_coupler_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
299
+ """QPDK gatemon coupler: a straight CPW ``o1`` → ``o2`` (a line) and the cell's nominal ``coupling_capacitance``
300
+ from the line to the node at ``qubit`` (the gatemon island it is snapped to; the snap merges ``qubit`` with
301
+ that island, so the C links line and island, not a galvanic join)."""
302
+ p = cell_params(inst)
303
+ length = _f(p.get("length"), 600)
304
+ frag = Fragment(
305
+ nodes={"line": {"island": f"{name}.line"}, "qubit": {"island": f"{name}.qubit"}},
306
+ port_nodes={"o1": "line", "o2": "line", "qubit": "qubit"},
307
+ )
308
+ frag.lines.append(
309
+ Line(name, "line", ("o1", "o2"), length, _f(p.get("a"), 10), _f(p.get("b"), 6), ("short", "short"))
310
+ )
311
+ ck = _f(p.get("coupling_capacitance"), 5.4)
312
+ _C(
313
+ frag,
314
+ f"Cg_{name}",
315
+ "line",
316
+ "qubit",
317
+ est.cap(ck, "rough", "QPDK nominal coupling_capacitance (cell parameter)"),
318
+ f"{name}.coupling_capacitance",
319
+ )
320
+ return frag
321
+
322
+
323
+ @register_lom("HyperbolicVertexCoupler")
324
+ def hyperbolic_vertex_coupler_lom(name: str, inst, pdk) -> Fragment:
325
+ """QPDK hyperbolic-lattice vertex coupler: ``q`` pie-slice pins of a disk, port ``o<k+1>`` on pin k; C between
326
+ neighbouring pins across the radial ``pin_gap`` and from each pin's arc to ground across ``ground_gap``
327
+ (non-neighbour pins neglected; rough)."""
328
+ p = cell_params(inst)
329
+ eps = est.substrate_eps(pdk)
330
+ q = max(int(_f(p.get("q"), 3)), 1)
331
+ r, gap, gg = _f(p.get("pin_radius"), 40), _f(p.get("pin_gap"), 4), _f(p.get("ground_gap"), 6)
332
+ lead = _f(p.get("lead_length"), 20)
333
+ frag = Fragment()
334
+ for k in range(q):
335
+ node = f"o{k + 1}"
336
+ frag.nodes[node] = {"island": f"{name}.{node}"}
337
+ frag.port_nodes[node] = node
338
+ cg = est.ring_to_ground(r, r, gg, eps) / q + est.cpw_line(lead, 10, 6, eps)
339
+ _C(
340
+ frag,
341
+ f"C_{name}_{node}",
342
+ node,
343
+ "gnd",
344
+ est.cap(cg, "rough", f"pin arc (1/{q} of a r {r:g} disk edge) + lead"),
345
+ )
346
+ slice_w = math.pi * r / q # mean width of a pie slice
347
+ pairs = [(k, (k + 1) % q) for k in range(q)] if q > 2 else ([(0, 1)] if q == 2 else [])
348
+ for i, j in pairs:
349
+ cm = est.coplanar_coupling(r, slice_w, slice_w, gap, eps)
350
+ _C(
351
+ frag,
352
+ f"C_{name}_o{i + 1}_o{j + 1}",
353
+ f"o{i + 1}",
354
+ f"o{j + 1}",
355
+ est.cap(cm, "rough", f"radial edges ({r:g} µm) across the {gap:g} µm pin gap (CPS)"),
356
+ f"{name}.pin_gap",
357
+ )
358
+ return frag
359
+
360
+
361
+ @register_lom("TransmonTaperedInsets")
362
+ def transmon_tapered_insets_lom(name: str, inst, pdk) -> Fragment:
363
+ """SQDMetal TransmonTaperedInsets: floating; island1 = top pad (``port_squid_a``), island2 = bottom pad; each
364
+ connection pad is its own conductor (port ``<name>``) with a C to the qubit pad on its side (``loc_H``). Corner
365
+ pins are placement marks: ``top_*`` → island1, ``bottom_*`` → island2 (a capacitor snapped there couples to that
366
+ pad), pocket pins → ground. Pads as coupled strips in the pocket (round ends counted in the width; tapers,
367
+ insets and teeth neglected: analytic)."""
368
+ from quantcore_circuits.layouts.qubits.sqdmetal_cells import connection_pad_options # pylint: disable=C0415
369
+ from quantcore_circuits.layouts.qubits.xmon import _junction_params # pylint: disable=C0415
370
+
371
+ p = cell_params(inst)
372
+ eps = est.substrate_eps(pdk)
373
+ pw, ph, pg = _f(p.get("pad_width"), 800), _f(p.get("pad_height"), 110), _f(p.get("pad_gap"), 100)
374
+ kw, kh = _f(p.get("pocket_width"), 1000), _f(p.get("pocket_height"), 800)
375
+ lower = _f(p.get("pocket_lower_tighten"), 120)
376
+ width = pw + ph # with the round ends
377
+ side = max((kw - width) / 2, 1.0)
378
+ back_top = max(kh / 2 - pg / 2 - ph, 1.0)
379
+ back_bot = max(kh / 2 - lower - pg / 2 - ph, 1.0)
380
+ c1, c12 = est.two_pads(width, ph, pg, side, back_top, eps)
381
+ c2, _ = est.two_pads(width, ph, pg, side, back_bot, eps)
382
+ frag = Fragment(nodes={"island1": {"island": f"{name}.island1"}, "island2": {"island": f"{name}.island2"}})
383
+ frag.port_nodes |= {
384
+ "squid_a": "island1",
385
+ "squid_b": "island2",
386
+ "top_right_pin": "island1",
387
+ "top_left_pin": "island1",
388
+ "bottom_right_pin": "island2",
389
+ "bottom_left_pin": "island2",
390
+ "top_pocket_pin": "gnd",
391
+ "bottom_pocket_pin": "gnd",
392
+ }
393
+ f = f"{width:g}×{ph:g} µm pads across {pg:g} µm in a {kw:g}×{kh:g} µm pocket (coupled strips + CPW)"
394
+ _C(frag, f"C_{name}_1", "island1", "gnd", est.cap(c1, "analytic", f), f"{name}.pad_width")
395
+ _C(frag, f"C_{name}_2", "island2", "gnd", est.cap(c2, "analytic", f), f"{name}.pad_width")
396
+ _C(frag, f"C_{name}_12", "island1", "island2", est.cap(c12, "analytic", f), f"{name}.pad_gap")
397
+ _qubit_junction(frag, name, inst, p, "island1", "island2")
398
+ for pname, opts in _junction_params(p.get("connection_pads") or "{}").items():
399
+ o = connection_pad_options(pname, opts)
400
+ node = f"cp_{pname}"
401
+ frag.nodes[node] = {"island": f"{name}.{pname}"}
402
+ frag.port_nodes[pname] = node
403
+ qpad = "island1" if float(o["loc_H"]) > 0 else "island2"
404
+ cpw_, cph, gap = float(o["pad_width"]), float(o["pad_height"]), max(float(o["pad_gap"]), 0.5)
405
+ cg = est.coplanar_coupling(cpw_, cph, ph, gap, eps)
406
+ wire = max(kh / 2 - ph - pg / 2 - gap - cph, 0.0) + float(o["cpw_extend"])
407
+ cc = est.pad_to_ground(cpw_, cph, side, max(float(o["pocket_extent"]), 1.0), eps, open_edges=1) + est.cpw_line(
408
+ wire, float(o["cpw_width"]), float(o["cpw_gap"]), eps
409
+ )
410
+ _C(
411
+ frag,
412
+ f"Cg_{name}_{pname}",
413
+ qpad,
414
+ node,
415
+ est.cap(cg, "analytic", f"{cpw_:g}×{cph:g} µm connection pad facing the qubit pad across {gap:g} µm (CPS)"),
416
+ )
417
+ _C(frag, f"Cc_{name}_{pname}", node, "gnd", est.cap(cc, "rough", "connection pad + its CPW wire"))
418
+ return frag
419
+
420
+
421
+ @register_lom("SmoothCapacitorSemicircle")
422
+ def smooth_capacitor_semicircle_lom(name: str, inst, pdk) -> Fragment:
423
+ """SQDMetal semicircle capacitor: one pad (port ``a``) whose semicircular bite wraps the qubit pad at ``target``
424
+ (a placement reference: snapped to a qubit pin, its node becomes that pad, so the C links pad and qubit pad).
425
+ C_target: the bite's arc facing the qubit pad's round end across an assumed 5 µm gap (the concentric SQDMetal
426
+ 2_transmons geometry; rough); pad to ground across its clearances (rough)."""
427
+ p = cell_params(inst)
428
+ eps = est.substrate_eps(pdk)
429
+ w, length = _f(p.get("rect_width"), 190), _f(p.get("rect_length"), 170)
430
+ r = _f(p.get("semi_radius"), 61)
431
+ gs, gb = _f(p.get("gap_side"), 25), _f(p.get("gap_back"), 25)
432
+ tw, lead = _f(p.get("trace_width"), 10), _f(p.get("lead_length"), 0)
433
+ frag = Fragment(
434
+ nodes={"pad": {"island": f"{name}.pad"}, "target": {"island": f"{name}.target"}},
435
+ port_nodes={"a": "pad", "target": "target"},
436
+ )
437
+ ct = est.coplanar_coupling(math.pi * r, max(w / 2 - r, tw), 2 * r, 5.0, eps)
438
+ _C(
439
+ frag,
440
+ f"C_{name}",
441
+ "pad",
442
+ "target",
443
+ est.cap(ct, "rough", f"semicircle arc {math.pi * r:.0f} µm around the qubit pad end, assumed 5 µm gap (CPS)"),
444
+ f"{name}.semi_radius",
445
+ )
446
+ cg = est.pad_to_ground(w, length, gs, gb, eps, open_edges=1) + est.cpw_line(lead, tw, 6, eps)
447
+ _C(frag, f"C_{name}_pad", "pad", "gnd", est.cap(cg, "rough", f"{w:g}×{length:g} µm pad in its clearance + lead"))
448
+ return frag
449
+
450
+
451
+ # ---- pads ---------------------------------------------------------------------------------------------------------
452
+ @register_lom("ConnectorPad")
453
+ def connector_pad_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
454
+ """Legacy wire-bond pad (v1): a 50 Ω port on the conductor its ``a`` port connects to."""
455
+ return Fragment(nodes={"pad": {"island": f"{name}.pad"}}, elements=[port_resistor(name)], port_nodes={"a": "pad"})
456
+
457
+
458
+ @register_lom("CpweBondPad")
459
+ def cpwe_bond_pad_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
460
+ """CPW-E bond pad: a 50 Ω port at ``a``."""
461
+ return Fragment(nodes={"pad": {"island": f"{name}.pad"}}, elements=[port_resistor(name)], port_nodes={"a": "pad"})
462
+
463
+
464
+ @register_lom("TaperedPad")
465
+ def tapered_pad_lom(name: str, inst, pdk) -> Fragment:
466
+ """Legacy probe pad tapering to a junction finger: the pad's C to ground (DC test pad, not an RF port)."""
467
+ p = cell_params(inst)
468
+ eps = est.substrate_eps(pdk)
469
+ w, h = _f(p.get("pad_width"), 275), _f(p.get("pad_height"), 300)
470
+ side = max((_f(p.get("window_width"), 300) - w) / 2, 1.0) if p.get("negative", True) else 50.0
471
+ c = est.pad_to_ground(w, h, side, side, eps)
472
+ frag = Fragment(nodes={"pad": {"island": f"{name}.pad"}}, port_nodes={"finger": "pad"})
473
+ _C(frag, f"C_{name}", "pad", "gnd", est.cap(c, "rough", f"{w:g}×{h:g} µm pad in a {side:g} µm clearance"))
474
+ return frag
475
+
476
+
477
+ # ---- lines and resonators -----------------------------------------------------------------------------------------
478
+ def _drawn_length(cls_name: str, p: dict, fallback: float) -> float:
479
+ """Centre-line length (µm) from the legacy cell's own point function; ``fallback`` if it cannot run."""
480
+ from quantcore_circuits.layouts.others import legacy_resonators as lr # pylint: disable=import-outside-toplevel
481
+
482
+ try:
483
+ cls = getattr(lr, cls_name)
484
+ ns = SimpleNamespace(**p, layout=SimpleNamespace(dbu=0.001))
485
+ pts = [(q.x * 0.001, q.y * 0.001) for q in cls._points(ns)] # pylint: disable=protected-access
486
+ length = sum(math.dist(a, b) for a, b in zip(pts, pts[1:]))
487
+ return length if length > 0 else fallback
488
+ except Exception: # noqa: BLE001 pylint: disable=broad-except
489
+ return fallback
490
+
491
+
492
+ def _resonator_line(name, p, cls_name, ports, term, resonator=True, node="res") -> tuple[Fragment, float]:
493
+ length = _drawn_length(cls_name, p, _f(p.get("cpw_len"), 4000))
494
+ frag = Fragment(nodes={node: {"island": f"{name}.{node}"}}, port_nodes={q: node for q in ports if q})
495
+ frag.lines.append(
496
+ Line(name, node, ports, length, _f(p.get("a"), 10), _f(p.get("b"), 6), term, resonator, knob=f"{name}.cpw_len")
497
+ )
498
+ _knob(frag, f"{name}.cpw_len", _f(p.get("cpw_len"), 4000))
499
+ return frag, length
500
+
501
+
502
+ def _coupled_meander(name: str, inst, cls_name: str) -> Fragment:
503
+ p = cell_params(inst)
504
+ # ``ground`` draws the gap cap (open end); without it the trace runs into the ground plane unless connected
505
+ end = "open" if p.get("ground", True) else "short"
506
+ frag, _ = _resonator_line(name, p, cls_name, (None, "end"), ("short", end))
507
+ frag.hangers.append(
508
+ {
509
+ "line": name,
510
+ "coupling_length_um": _f(p.get("clength"), 500),
511
+ "ground_gap_um": max(_f(p.get("cgap"), 6), 0.5),
512
+ "end": "short",
513
+ "source": "coupler section next to a separate feedline (legacy placement)",
514
+ }
515
+ )
516
+ return frag
517
+
518
+
519
+ @register_lom("CoupledResonator")
520
+ def coupled_resonator_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
521
+ """Legacy coupled resonator: λ/4 meander from the shorted start next to the coupler section to port ``end``."""
522
+ return _coupled_meander(name, inst, "CoupledResonator")
523
+
524
+
525
+ @register_lom("QubitResonator")
526
+ def qubit_resonator_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
527
+ """Legacy qubit resonator: as CoupledResonator, the tail (port ``end``) runs to the qubit."""
528
+ return _coupled_meander(name, inst, "QubitResonator")
529
+
530
+
531
+ @register_lom("CpwResonator")
532
+ def cpw_resonator_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
533
+ """Legacy CPW resonator: a resonator line between ``start`` and ``end`` (both run into ground when free: λ/2)."""
534
+ p = cell_params(inst)
535
+ frag, _ = _resonator_line(name, p, "CpwResonator", ("start", "end"), ("short", "short"))
536
+ frag.notes.append(f"{name}: coupling to a feedline is not in the cell; declare it with d.couple(...)")
537
+ return frag
538
+
539
+
540
+ @register_lom("CoupledConnector")
541
+ def coupled_connector_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
542
+ """Legacy coupled connector: a line from the shorted ``start`` to ``end`` (λ/4 when ``end`` meets a capacitor,
543
+ a wire when both ends are connected)."""
544
+ p = cell_params(inst)
545
+ end = "short" if p.get("ground", False) else "open"
546
+ frag, _ = _resonator_line(
547
+ name, p, "CoupledConnector", ("start", "end"), ("short", end), resonator=False, node="line"
548
+ )
549
+ return frag
550
+
551
+
552
+ @register_lom("CpwSegment")
553
+ def cpw_segment_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
554
+ """Legacy straight CPW (feedline): one conductor from ``a`` to ``b`` (a stub resonator only with a free end)."""
555
+ p = cell_params(inst)
556
+ length = _f(p.get("length"), 200)
557
+ frag = Fragment(nodes={"line": {"island": f"{name}.line"}}, port_nodes={"a": "line", "b": "line"})
558
+ frag.lines.append(Line(name, "line", ("a", "b"), length, _f(p.get("a"), 10), _f(p.get("b"), 6), ("short", "short")))
559
+ return frag
560
+
561
+
562
+ @register_lom("CpweQuarterWaveResonator")
563
+ def cpwe_quarter_wave_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
564
+ """CPW-E λ/4: open coupler arm (no port) → bend → taper → meander → shorted end, as one λ/4 line.
565
+
566
+ The coupler arm runs next to a feedline the cell does not contain: declare ``d.couple("K_<R>", "<R>",
567
+ "<feedline instance>")`` for the hanger (coupled section at the open end; the ground strip is set by the
568
+ placement, 6 µm assumed).
569
+ """
570
+ from quantcore_circuits.layouts.others.cpwe import CpweQuarterWaveResonator # pylint: disable=C0415
571
+
572
+ p = cell_params(inst)
573
+ length = CpweQuarterWaveResonator.qcc_resonator_length(p)
574
+ frag = Fragment(nodes={"res": {"island": f"{name}.res"}})
575
+ frag.lines.append(
576
+ Line(name, "res", (None, None), length, _f(p.get("a"), 10), _f(p.get("b"), 6), ("open", "short"), True)
577
+ )
578
+ frag.hangers.append(
579
+ {
580
+ "line": name,
581
+ "coupling_length_um": _f(p.get("cap_length"), 200),
582
+ "ground_gap_um": 6.0,
583
+ "end": "open",
584
+ "source": "rough: CPW-E coupler arm at the open end; ground strip to the feedline assumed 6 µm",
585
+ }
586
+ )
587
+ frag.notes.append(f"{name}: λ/4 of {length:.0f} µm (drawn); coupler arm CPW differs from the line CPW")
588
+ return frag
589
+
590
+
591
+ @register_lom("CpweMeanderLine")
592
+ def cpwe_meander_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
593
+ """CPW-E meander (+ leads): a resonator line between ``a`` and ``b`` (λ/2 bus between two couplers, a stub
594
+ resonator with a free end, a wire to a port/feedline)."""
595
+ p = cell_params(inst)
596
+ a, b = _f(p.get("a"), 10), _f(p.get("b"), 6)
597
+ r, m_len = _f(p.get("meander_radius"), 50), _f(p.get("meander_length"), 500)
598
+ n = int(_f(p.get("meanders"), 2))
599
+ try:
600
+ from quantcore_circuits.layouts.others.cpwe import CpwePen # pylint: disable=import-outside-toplevel
601
+
602
+ _, _, ltot = CpwePen(0.001).meander_line(
603
+ 0,
604
+ 0,
605
+ "h",
606
+ a * 1e3,
607
+ b * 1e3,
608
+ r * 1e3,
609
+ m_len * 1e3,
610
+ _f(p.get("bias"), 0.5),
611
+ n,
612
+ bool(p.get("flip")),
613
+ bool(p.get("term_early")),
614
+ )
615
+ length = ltot / 1e3
616
+ except Exception: # noqa: BLE001 pylint: disable=broad-except
617
+ length = (2 * n + 1) * m_len + (2 * n + 1) * math.pi * r # rough: straight runs + half turns
618
+ length += 2 * max(_f(p.get("lead"), 0), 0.0)
619
+ frag = Fragment(nodes={"line": {"island": f"{name}.line"}}, port_nodes={"a": "line", "b": "line"})
620
+ frag.lines.append(Line(name, "line", ("a", "b"), length, a, b, ("short", "short"), True, knob=f"{name}.meanders"))
621
+ return frag
622
+
623
+
624
+ @register_lom("SpiralLine")
625
+ def spiral_line_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
626
+ """Spiral line (legacy ``draw.spiral``): one conductor ``a`` → ``b``, a line of the drawn centre-line length with
627
+ the mean turn spacing as its gap (rough: neighbouring turns are not a ground plane; mutual inductance between
628
+ turns is not modelled; the film kinetic inductance enters as for any CPW). Open ends when nothing connects (a
629
+ spiral λ/2 resonator); an etched spiral (``metal=False``) is a slot, not a conductor: no element."""
630
+ from quantcore_circuits.layouts.others.spirals import SpiralLine # pylint: disable=import-outside-toplevel
631
+
632
+ p = cell_params(inst)
633
+ if p.get("metal") is False:
634
+ return Fragment(notes=[f"{name}: etched spiral (a slot in the ground plane): no circuit element"])
635
+ length, gap = SpiralLine.qcc_length(p), SpiralLine.qcc_turn_gap(p)
636
+ frag = Fragment(nodes={"line": {"island": f"{name}.line"}}, port_nodes={"a": "line", "b": "line"})
637
+ frag.lines.append(Line(name, "line", ("a", "b"), length, _f(p.get("width"), 2), gap, ("open", "open"), True))
638
+ frag.notes.append(
639
+ f"{name}: spiral line {length:.0f} µm (gap = mean turn spacing {gap:.2g} µm; rough; kinetic L as a CPW)"
640
+ )
641
+ return frag
642
+
643
+
644
+ @register_lom("CpweTaper")
645
+ def cpwe_taper_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
646
+ """CPW-E taper: a pass-through section of ``length`` between ``a`` and ``b`` (``Line.through``: inside a
647
+ resonator it extends the line; the width step is not modelled, mean a/b)."""
648
+ p = cell_params(inst)
649
+ a = (_f(p.get("a"), 10) + _f(p.get("a_end"), 20)) / 2
650
+ b = (_f(p.get("b"), 6) + _f(p.get("b_end"), 12)) / 2
651
+ frag = Fragment(nodes={"line": {"island": f"{name}.line"}}, port_nodes={"a": "line", "b": "line"})
652
+ frag.lines.append(Line(name, "line", ("a", "b"), _f(p.get("length"), 100), a, b, ("short", "short"), through=True))
653
+ return frag
654
+
655
+
656
+ @register_lom("NeckTermination")
657
+ def neck_termination_lom(name: str, inst, pdk) -> Fragment:
658
+ """QPDK neck termination: the line routed to ``o1`` ends shorted after a taper (``a`` → ``neck_width``) and a
659
+ narrow neck, both a strip in an etched window. A pass-through end section (``Line.through``, shorted far end):
660
+ the route is the resonator. A short series section at a current antinode adds the electrical length
661
+ ℓ · L'_section / L'_cpw, so taper and neck count at their per-length inductance (strip in the window, gap =
662
+ (window − width)/2) relative to the a/b CPW (analytic CPW formulas; rough)."""
663
+ from quantcore_circuits.analysis.synthesis import cpw_properties # pylint: disable=import-outside-toplevel
664
+
665
+ p = cell_params(inst)
666
+ a, b = _f(p.get("a"), 10), _f(p.get("b"), 6)
667
+ w, win = _f(p.get("neck_width"), 2), _f(p.get("window_width"), 380)
668
+ lt, ln = _f(p.get("taper_length"), 100), _f(p.get("neck_length"), 325)
669
+
670
+ def l_per_um(width: float, gap: float) -> float: # H/m up to a constant: Z0 / v_p
671
+ q = cpw_properties(6.0, width, gap, pdk.name)
672
+ return q["Z0_ohm"] / q["vp_m_s"]
673
+
674
+ ref = l_per_um(a, b)
675
+ mid = (a + w) / 2
676
+ taper_eq = lt * l_per_um(mid, max((win - mid) / 2, b)) / ref
677
+ neck_eq = ln * l_per_um(w, max((win - w) / 2, b)) / ref
678
+ frag = Fragment(nodes={"line": {"island": f"{name}.line"}}, port_nodes={"o1": "line"})
679
+ frag.lines.append(Line(name, "line", ("o1", None), taper_eq + neck_eq, a, b, ("short", "short"), through=True))
680
+ frag.notes.append(
681
+ f"{name}: taper {lt:g} µm + neck {ln:g} µm counted as {taper_eq + neck_eq:.0f} µm of {a:g}/{b:g} µm CPW "
682
+ f"(L' ratio {neck_eq / ln:.2f} for the neck; rough: no neck L_k beyond the CPW formula, no C of the window)"
683
+ )
684
+ return frag
685
+
686
+
687
+ @register_lom("CpweOpenEnd")
688
+ def cpwe_open_end_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
689
+ """CPW-E open termination: a zero-length open end; a route into it becomes an open-ended resonator."""
690
+ p = cell_params(inst)
691
+ frag = Fragment(nodes={"end": {"island": f"{name}.end"}}, port_nodes={"a": "end"})
692
+ frag.lines.append(Line(name, "end", ("a", None), 0.0, _f(p.get("a"), 10), _f(p.get("b"), 6), ("open", "open")))
693
+ return frag
694
+
695
+
696
+ # ---- CPW-E capacitors ---------------------------------------------------------------------------------------------
697
+ def _pi(name, cab, cg, kind_ab, formula_ab, formula_g, knob=None) -> Fragment:
698
+ frag = Fragment(nodes={"a": {"island": f"{name}.a"}, "b": {"island": f"{name}.b"}}, port_nodes={"a": "a", "b": "b"})
699
+ _C(frag, f"C_{name}", "a", "b", est.cap(cab, kind_ab, formula_ab), knob)
700
+ _C(frag, f"C_{name}_a", "a", "gnd", est.cap(cg, "rough", formula_g))
701
+ _C(frag, f"C_{name}_b", "b", "gnd", est.cap(cg, "rough", formula_g))
702
+ return frag
703
+
704
+
705
+ @register_lom("CpweFingerCapacitor")
706
+ def cpwe_finger_capacitor_lom(name: str, inst, pdk) -> Fragment:
707
+ """CPW-E interdigital capacitor in the centre line: ``fingers`` fingers sharing the centre width, overlap
708
+ ``finger_length − finger_gap`` (Igreja–Dias) + tip gaps; C to ground: half the section as CPW each side."""
709
+ p = cell_params(inst)
710
+ eps = est.substrate_eps(pdk)
711
+ a, b = _f(p.get("a"), 10), _f(p.get("b"), 6)
712
+ n, sep, flen = int(_f(p.get("fingers"), 4)), _f(p.get("finger_gap"), 2), _f(p.get("finger_length"), 50)
713
+ fw = max((a - (n - 1) * sep) / max(n, 1), 0.1)
714
+ cab = est.interdigital(n, fw, sep, max(flen - sep, 0.0), eps)
715
+ cab += est.coplanar_coupling(n * fw, max(fw, 10.0), max(fw, 10.0), max(sep, 0.5), eps)
716
+ cg = est.cpw_line((flen + sep) / 2, a, b, eps)
717
+ return _pi(
718
+ name,
719
+ cab,
720
+ cg,
721
+ "analytic",
722
+ f"{n} fingers {fw:.2g} µm / {sep:g} µm, overlap {flen - sep:g} µm (Igreja & Dias 2004) + tips",
723
+ "half the capacitor section as CPW",
724
+ f"{name}.finger_length",
725
+ )
726
+
727
+
728
+ @register_lom("CpweGapCapacitor")
729
+ def cpwe_gap_capacitor_lom(name: str, inst, pdk) -> Fragment:
730
+ """CPW-E gap in the centre line: end-to-end C across ``cap_gap`` (rough); open-end fringe to ground each side."""
731
+ p = cell_params(inst)
732
+ eps = est.substrate_eps(pdk)
733
+ a, b, g = _f(p.get("a"), 10), _f(p.get("b"), 6), max(_f(p.get("cap_gap"), 5), 0.1)
734
+ cab = est.coplanar_coupling(a, max(a, 10.0), max(a, 10.0), g, eps)
735
+ cg = est.cpw_line(b, a, b, eps)
736
+ return _pi(
737
+ name,
738
+ cab,
739
+ cg,
740
+ "rough",
741
+ f"centre-line ends {a:g} µm wide across {g:g} µm (CPS)",
742
+ "open-end fringe ≈ a CPW stub one gap long",
743
+ f"{name}.cap_gap",
744
+ )
745
+
746
+
747
+ @register_lom("CpweFingerLine")
748
+ def cpwe_finger_line_lom(name: str, inst, pdk) -> Fragment:
749
+ """CPW-E finger line: the centre conductor continues from ``a`` to ``b`` (a wire) with interleaved fingers from
750
+ the centre and the ground in both gaps: a shunt C to ground (interdigital per side + the section as CPW)."""
751
+ p = cell_params(inst)
752
+ eps = est.substrate_eps(pdk)
753
+ a, b = _f(p.get("a"), 10), _f(p.get("b"), 6)
754
+ n, sep = int(_f(p.get("fingers"), 10)), _f(p.get("finger_gap"), 2)
755
+ flen, fw = _f(p.get("finger_length"), 4), _f(p.get("finger_width"), 2)
756
+ overlap = max(2 * flen - b, 0.0)
757
+ total = n * fw + (n - 1) * sep
758
+ c = 2 * est.interdigital(n, fw, sep, overlap, eps) + est.cpw_line(total, a, max(b - flen, 0.5), eps)
759
+ frag = Fragment(nodes={"line": {"island": f"{name}.line"}}, port_nodes={"a": "line", "b": "line"})
760
+ _C(
761
+ frag,
762
+ f"C_{name}",
763
+ "line",
764
+ "gnd",
765
+ est.cap(c, "rough", f"{n} fingers per gap, overlap {overlap:g} µm (Igreja & Dias) + {total:g} µm of CPW"),
766
+ f"{name}.fingers",
767
+ )
768
+ return frag
769
+
770
+
771
+ # ---- no circuit elements ------------------------------------------------------------------------------------------
772
+ @register_lom("FluxHoleArray")
773
+ @register_lom("FluxHoles")
774
+ def flux_holes_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
775
+ """Flux-trapping holes in the ground plane: no ports, no circuit elements."""
776
+ return Fragment()
777
+
778
+
779
+ @register_lom("WaveguideCoplanarStraight")
780
+ def kqc_cpw_segment_lom(name: str, inst, pdk) -> Fragment: # noqa: ARG001
781
+ """KQC bare straight CPW segment (the piece routes are drawn with): no ports, so no circuit elements; connect
782
+ with a route or a ``WaveguideCoplanar``. (``WaveguideCoplanarCurved`` has ports and a line model since
783
+ 2026-11-15: :mod:`.kqc_models`.)"""
784
+ return Fragment(notes=[f"{name}: bare KQC CPW segment without ports; no circuit elements"])