quantcore-circuits 0.0.1__py3-none-any.whl

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (272) hide show
  1. quantcore_circuits/__init__.py +57 -0
  2. quantcore_circuits/analysis/__init__.py +12 -0
  3. quantcore_circuits/analysis/_metal.py +70 -0
  4. quantcore_circuits/analysis/amplifiers.py +263 -0
  5. quantcore_circuits/analysis/circuits.py +117 -0
  6. quantcore_circuits/analysis/epr.py +231 -0
  7. quantcore_circuits/analysis/epr_lumped.py +372 -0
  8. quantcore_circuits/analysis/extract.py +119 -0
  9. quantcore_circuits/analysis/lom.py +80 -0
  10. quantcore_circuits/analysis/results.py +549 -0
  11. quantcore_circuits/analysis/store.py +81 -0
  12. quantcore_circuits/analysis/synthesis.py +118 -0
  13. quantcore_circuits/analysis/transmon.py +126 -0
  14. quantcore_circuits/assembly/__init__.py +17 -0
  15. quantcore_circuits/assembly/builder.py +127 -0
  16. quantcore_circuits/assembly/drc.py +683 -0
  17. quantcore_circuits/assembly/last_good.py +137 -0
  18. quantcore_circuits/assembly/netlist.py +174 -0
  19. quantcore_circuits/assembly/plan.py +605 -0
  20. quantcore_circuits/assembly/sidecar.py +270 -0
  21. quantcore_circuits/autotrack.py +605 -0
  22. quantcore_circuits/cards.py +878 -0
  23. quantcore_circuits/circuit/__init__.py +14 -0
  24. quantcore_circuits/circuit/adapters.py +305 -0
  25. quantcore_circuits/circuit/bridges.py +353 -0
  26. quantcore_circuits/circuit/consensus.py +158 -0
  27. quantcore_circuits/circuit/derive.py +28 -0
  28. quantcore_circuits/circuit/draw.py +198 -0
  29. quantcore_circuits/circuit/fill.py +828 -0
  30. quantcore_circuits/circuit/hamiltonian.py +193 -0
  31. quantcore_circuits/circuit/kinetic.py +102 -0
  32. quantcore_circuits/circuit/schema.py +139 -0
  33. quantcore_circuits/cli.py +1085 -0
  34. quantcore_circuits/codesign.py +1038 -0
  35. quantcore_circuits/data/selftest_q1_r1.json +44 -0
  36. quantcore_circuits/design/__init__.py +44 -0
  37. quantcore_circuits/design/io.py +98 -0
  38. quantcore_circuits/design/pyscript.py +395 -0
  39. quantcore_circuits/design/schema.py +398 -0
  40. quantcore_circuits/designer.py +625 -0
  41. quantcore_circuits/guiflow.py +991 -0
  42. quantcore_circuits/kqc_files.py +208 -0
  43. quantcore_circuits/layouts/__init__.py +118 -0
  44. quantcore_circuits/layouts/catalog.py +520 -0
  45. quantcore_circuits/layouts/chips/__init__.py +0 -0
  46. quantcore_circuits/layouts/chips/design_chip.py +325 -0
  47. quantcore_circuits/layouts/chips/frame.py +235 -0
  48. quantcore_circuits/layouts/junctions/__init__.py +0 -0
  49. quantcore_circuits/layouts/junctions/jj_fingers.py +99 -0
  50. quantcore_circuits/layouts/junctions/legacy_junctions.py +237 -0
  51. quantcore_circuits/layouts/junctions/sim_gap.py +48 -0
  52. quantcore_circuits/layouts/junctions/trilayer.py +541 -0
  53. quantcore_circuits/layouts/metal/__init__.py +105 -0
  54. quantcore_circuits/layouts/metal/component.py +332 -0
  55. quantcore_circuits/layouts/metal/geometry.py +462 -0
  56. quantcore_circuits/layouts/others/__init__.py +0 -0
  57. quantcore_circuits/layouts/others/amplifiers.py +1139 -0
  58. quantcore_circuits/layouts/others/bond_pad.py +119 -0
  59. quantcore_circuits/layouts/others/connector_pads.py +190 -0
  60. quantcore_circuits/layouts/others/couplers.py +21 -0
  61. quantcore_circuits/layouts/others/cpw_segment.py +131 -0
  62. quantcore_circuits/layouts/others/cpwe.py +661 -0
  63. quantcore_circuits/layouts/others/keepout.py +66 -0
  64. quantcore_circuits/layouts/others/legacy_resonators.py +645 -0
  65. quantcore_circuits/layouts/others/markers.py +201 -0
  66. quantcore_circuits/layouts/others/qpdk_cells.py +263 -0
  67. quantcore_circuits/layouts/others/shapes.py +114 -0
  68. quantcore_circuits/layouts/others/spirals.py +140 -0
  69. quantcore_circuits/layouts/others/sqdmetal_cells.py +90 -0
  70. quantcore_circuits/layouts/others/test_pads.py +461 -0
  71. quantcore_circuits/layouts/ports.py +119 -0
  72. quantcore_circuits/layouts/qubits/__init__.py +0 -0
  73. quantcore_circuits/layouts/qubits/legacy_transmon.py +124 -0
  74. quantcore_circuits/layouts/qubits/qpdk_cells.py +374 -0
  75. quantcore_circuits/layouts/qubits/sqdmetal_cells.py +376 -0
  76. quantcore_circuits/layouts/qubits/trilayer_concentric.py +65 -0
  77. quantcore_circuits/layouts/qubits/xmon.py +375 -0
  78. quantcore_circuits/layouts/registry.py +418 -0
  79. quantcore_circuits/layouts/wafers/__init__.py +0 -0
  80. quantcore_circuits/layouts/wafers/fab_export.py +454 -0
  81. quantcore_circuits/layouts/wafers/legacy_wafer.py +111 -0
  82. quantcore_circuits/layouts/wafers/wafer.py +469 -0
  83. quantcore_circuits/live/__init__.py +6 -0
  84. quantcore_circuits/live/klayout.py +225 -0
  85. quantcore_circuits/live/klive.py +61 -0
  86. quantcore_circuits/live/snapshot.py +185 -0
  87. quantcore_circuits/live/watch.py +93 -0
  88. quantcore_circuits/lom/__init__.py +15 -0
  89. quantcore_circuits/lom/builder.py +932 -0
  90. quantcore_circuits/lom/calibration.py +82 -0
  91. quantcore_circuits/lom/estimates.py +235 -0
  92. quantcore_circuits/lom/fragment.py +421 -0
  93. quantcore_circuits/lom/kqc_models.py +734 -0
  94. quantcore_circuits/lom/metal_models.py +917 -0
  95. quantcore_circuits/lom/quantcore_models.py +784 -0
  96. quantcore_circuits/lom/simulate.py +636 -0
  97. quantcore_circuits/lom/synthesize.py +189 -0
  98. quantcore_circuits/loop.py +610 -0
  99. quantcore_circuits/optimise.py +423 -0
  100. quantcore_circuits/pdk/__init__.py +451 -0
  101. quantcore_circuits/plots.py +876 -0
  102. quantcore_circuits/plugins.py +69 -0
  103. quantcore_circuits/review/__init__.py +57 -0
  104. quantcore_circuits/review/server.py +251 -0
  105. quantcore_circuits/review/static/assets/KaTeX_AMS-Regular-BQhdFMY1.woff2 +0 -0
  106. quantcore_circuits/review/static/assets/KaTeX_AMS-Regular-DMm9YOAa.woff +0 -0
  107. quantcore_circuits/review/static/assets/KaTeX_AMS-Regular-DRggAlZN.ttf +0 -0
  108. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Bold-ATXxdsX0.ttf +0 -0
  109. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Bold-BEiXGLvX.woff +0 -0
  110. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Bold-Dq_IR9rO.woff2 +0 -0
  111. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Regular-CTRA-rTL.woff +0 -0
  112. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Regular-Di6jR-x-.woff2 +0 -0
  113. quantcore_circuits/review/static/assets/KaTeX_Caligraphic-Regular-wX97UBjC.ttf +0 -0
  114. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Bold-BdnERNNW.ttf +0 -0
  115. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Bold-BsDP51OF.woff +0 -0
  116. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Bold-CL6g_b3V.woff2 +0 -0
  117. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Regular-CB_wures.ttf +0 -0
  118. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Regular-CTYiF6lA.woff2 +0 -0
  119. quantcore_circuits/review/static/assets/KaTeX_Fraktur-Regular-Dxdc4cR9.woff +0 -0
  120. quantcore_circuits/review/static/assets/KaTeX_Main-Bold-Cx986IdX.woff2 +0 -0
  121. quantcore_circuits/review/static/assets/KaTeX_Main-Bold-Jm3AIy58.woff +0 -0
  122. quantcore_circuits/review/static/assets/KaTeX_Main-Bold-waoOVXN0.ttf +0 -0
  123. quantcore_circuits/review/static/assets/KaTeX_Main-BoldItalic-DxDJ3AOS.woff2 +0 -0
  124. quantcore_circuits/review/static/assets/KaTeX_Main-BoldItalic-DzxPMmG6.ttf +0 -0
  125. quantcore_circuits/review/static/assets/KaTeX_Main-BoldItalic-SpSLRI95.woff +0 -0
  126. quantcore_circuits/review/static/assets/KaTeX_Main-Italic-3WenGoN9.ttf +0 -0
  127. quantcore_circuits/review/static/assets/KaTeX_Main-Italic-BMLOBm91.woff +0 -0
  128. quantcore_circuits/review/static/assets/KaTeX_Main-Italic-NWA7e6Wa.woff2 +0 -0
  129. quantcore_circuits/review/static/assets/KaTeX_Main-Regular-B22Nviop.woff2 +0 -0
  130. quantcore_circuits/review/static/assets/KaTeX_Main-Regular-Dr94JaBh.woff +0 -0
  131. quantcore_circuits/review/static/assets/KaTeX_Main-Regular-ypZvNtVU.ttf +0 -0
  132. quantcore_circuits/review/static/assets/KaTeX_Math-BoldItalic-B3XSjfu4.ttf +0 -0
  133. quantcore_circuits/review/static/assets/KaTeX_Math-BoldItalic-CZnvNsCZ.woff2 +0 -0
  134. quantcore_circuits/review/static/assets/KaTeX_Math-BoldItalic-iY-2wyZ7.woff +0 -0
  135. quantcore_circuits/review/static/assets/KaTeX_Math-Italic-DA0__PXp.woff +0 -0
  136. quantcore_circuits/review/static/assets/KaTeX_Math-Italic-flOr_0UB.ttf +0 -0
  137. quantcore_circuits/review/static/assets/KaTeX_Math-Italic-t53AETM-.woff2 +0 -0
  138. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Bold-CFMepnvq.ttf +0 -0
  139. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Bold-D1sUS0GD.woff2 +0 -0
  140. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Bold-DbIhKOiC.woff +0 -0
  141. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Italic-C3H0VqGB.woff2 +0 -0
  142. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Italic-DN2j7dab.woff +0 -0
  143. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Italic-YYjJ1zSn.ttf +0 -0
  144. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Regular-BNo7hRIc.ttf +0 -0
  145. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Regular-CS6fqUqJ.woff +0 -0
  146. quantcore_circuits/review/static/assets/KaTeX_SansSerif-Regular-DDBCnlJ7.woff2 +0 -0
  147. quantcore_circuits/review/static/assets/KaTeX_Script-Regular-C5JkGWo-.ttf +0 -0
  148. quantcore_circuits/review/static/assets/KaTeX_Script-Regular-D3wIWfF6.woff2 +0 -0
  149. quantcore_circuits/review/static/assets/KaTeX_Script-Regular-D5yQViql.woff +0 -0
  150. quantcore_circuits/review/static/assets/KaTeX_Size1-Regular-C195tn64.woff +0 -0
  151. quantcore_circuits/review/static/assets/KaTeX_Size1-Regular-Dbsnue_I.ttf +0 -0
  152. quantcore_circuits/review/static/assets/KaTeX_Size1-Regular-mCD8mA8B.woff2 +0 -0
  153. quantcore_circuits/review/static/assets/KaTeX_Size2-Regular-B7gKUWhC.ttf +0 -0
  154. quantcore_circuits/review/static/assets/KaTeX_Size2-Regular-Dy4dx90m.woff2 +0 -0
  155. quantcore_circuits/review/static/assets/KaTeX_Size2-Regular-oD1tc_U0.woff +0 -0
  156. quantcore_circuits/review/static/assets/KaTeX_Size3-Regular-CTq5MqoE.woff +0 -0
  157. quantcore_circuits/review/static/assets/KaTeX_Size3-Regular-DgpXs0kz.ttf +0 -0
  158. quantcore_circuits/review/static/assets/KaTeX_Size4-Regular-BF-4gkZK.woff +0 -0
  159. quantcore_circuits/review/static/assets/KaTeX_Size4-Regular-DWFBv043.ttf +0 -0
  160. quantcore_circuits/review/static/assets/KaTeX_Size4-Regular-Dl5lxZxV.woff2 +0 -0
  161. quantcore_circuits/review/static/assets/KaTeX_Typewriter-Regular-C0xS9mPB.woff +0 -0
  162. quantcore_circuits/review/static/assets/KaTeX_Typewriter-Regular-CO6r4hn1.woff2 +0 -0
  163. quantcore_circuits/review/static/assets/KaTeX_Typewriter-Regular-D3Ib7_Hf.ttf +0 -0
  164. quantcore_circuits/review/static/assets/index-CDHdrFyA.css +1 -0
  165. quantcore_circuits/review/static/assets/index-CSx05Og4.js +409 -0
  166. quantcore_circuits/review/static/assets/inter-cyrillic-400-normal-HOLc17fK.woff +0 -0
  167. quantcore_circuits/review/static/assets/inter-cyrillic-400-normal-obahsSVq.woff2 +0 -0
  168. quantcore_circuits/review/static/assets/inter-cyrillic-500-normal-BasfLYem.woff2 +0 -0
  169. quantcore_circuits/review/static/assets/inter-cyrillic-500-normal-CxZf_p3X.woff +0 -0
  170. quantcore_circuits/review/static/assets/inter-cyrillic-600-normal-4D_pXhcN.woff +0 -0
  171. quantcore_circuits/review/static/assets/inter-cyrillic-600-normal-CWCymEST.woff2 +0 -0
  172. quantcore_circuits/review/static/assets/inter-cyrillic-700-normal-CjBOestx.woff2 +0 -0
  173. quantcore_circuits/review/static/assets/inter-cyrillic-700-normal-DrXBdSj3.woff +0 -0
  174. quantcore_circuits/review/static/assets/inter-cyrillic-ext-400-normal-BQZuk6qB.woff2 +0 -0
  175. quantcore_circuits/review/static/assets/inter-cyrillic-ext-400-normal-DQukG94-.woff +0 -0
  176. quantcore_circuits/review/static/assets/inter-cyrillic-ext-500-normal-B0yAr1jD.woff2 +0 -0
  177. quantcore_circuits/review/static/assets/inter-cyrillic-ext-500-normal-BmqWE9Dz.woff +0 -0
  178. quantcore_circuits/review/static/assets/inter-cyrillic-ext-600-normal-Bcila6Z-.woff +0 -0
  179. quantcore_circuits/review/static/assets/inter-cyrillic-ext-600-normal-Dfes3d0z.woff2 +0 -0
  180. quantcore_circuits/review/static/assets/inter-cyrillic-ext-700-normal-BjwYoWNd.woff2 +0 -0
  181. quantcore_circuits/review/static/assets/inter-cyrillic-ext-700-normal-LO58E6JB.woff +0 -0
  182. quantcore_circuits/review/static/assets/inter-greek-400-normal-B4URO6DV.woff2 +0 -0
  183. quantcore_circuits/review/static/assets/inter-greek-400-normal-q2sYcFCs.woff +0 -0
  184. quantcore_circuits/review/static/assets/inter-greek-500-normal-BIZE56-Y.woff2 +0 -0
  185. quantcore_circuits/review/static/assets/inter-greek-500-normal-Xzm54t5V.woff +0 -0
  186. quantcore_circuits/review/static/assets/inter-greek-600-normal-BZpKdvQh.woff +0 -0
  187. quantcore_circuits/review/static/assets/inter-greek-600-normal-plRanbMR.woff2 +0 -0
  188. quantcore_circuits/review/static/assets/inter-greek-700-normal-BUv2fZ6O.woff +0 -0
  189. quantcore_circuits/review/static/assets/inter-greek-700-normal-C3JjAnD8.woff2 +0 -0
  190. quantcore_circuits/review/static/assets/inter-greek-ext-400-normal-DGGRlc-M.woff2 +0 -0
  191. quantcore_circuits/review/static/assets/inter-greek-ext-400-normal-KugGGMne.woff +0 -0
  192. quantcore_circuits/review/static/assets/inter-greek-ext-500-normal-2j5mBUwD.woff +0 -0
  193. quantcore_circuits/review/static/assets/inter-greek-ext-500-normal-C4iEst2y.woff2 +0 -0
  194. quantcore_circuits/review/static/assets/inter-greek-ext-600-normal-B8X0CLgF.woff +0 -0
  195. quantcore_circuits/review/static/assets/inter-greek-ext-600-normal-DRtmH8MT.woff2 +0 -0
  196. quantcore_circuits/review/static/assets/inter-greek-ext-700-normal-BoQ6DsYi.woff +0 -0
  197. quantcore_circuits/review/static/assets/inter-greek-ext-700-normal-qfdV9bQt.woff2 +0 -0
  198. quantcore_circuits/review/static/assets/inter-latin-400-normal-C38fXH4l.woff2 +0 -0
  199. quantcore_circuits/review/static/assets/inter-latin-400-normal-CyCys3Eg.woff +0 -0
  200. quantcore_circuits/review/static/assets/inter-latin-500-normal-BL9OpVg8.woff +0 -0
  201. quantcore_circuits/review/static/assets/inter-latin-500-normal-Cerq10X2.woff2 +0 -0
  202. quantcore_circuits/review/static/assets/inter-latin-600-normal-CiBQ2DWP.woff +0 -0
  203. quantcore_circuits/review/static/assets/inter-latin-600-normal-LgqL8muc.woff2 +0 -0
  204. quantcore_circuits/review/static/assets/inter-latin-700-normal-BLAVimhd.woff +0 -0
  205. quantcore_circuits/review/static/assets/inter-latin-700-normal-Yt3aPRUw.woff2 +0 -0
  206. quantcore_circuits/review/static/assets/inter-latin-ext-400-normal-77YHD8bZ.woff +0 -0
  207. quantcore_circuits/review/static/assets/inter-latin-ext-400-normal-C1nco2VV.woff2 +0 -0
  208. quantcore_circuits/review/static/assets/inter-latin-ext-500-normal-BxGbmqWO.woff +0 -0
  209. quantcore_circuits/review/static/assets/inter-latin-ext-500-normal-CV4jyFjo.woff2 +0 -0
  210. quantcore_circuits/review/static/assets/inter-latin-ext-600-normal-CIVaiw4L.woff +0 -0
  211. quantcore_circuits/review/static/assets/inter-latin-ext-600-normal-D2bJ5OIk.woff2 +0 -0
  212. quantcore_circuits/review/static/assets/inter-latin-ext-700-normal-Ca8adRJv.woff2 +0 -0
  213. quantcore_circuits/review/static/assets/inter-latin-ext-700-normal-TidjK2hL.woff +0 -0
  214. quantcore_circuits/review/static/assets/inter-vietnamese-400-normal-Bbgyi5SW.woff +0 -0
  215. quantcore_circuits/review/static/assets/inter-vietnamese-400-normal-DMkecbls.woff2 +0 -0
  216. quantcore_circuits/review/static/assets/inter-vietnamese-500-normal-DOriooB6.woff2 +0 -0
  217. quantcore_circuits/review/static/assets/inter-vietnamese-500-normal-mJboJaSs.woff +0 -0
  218. quantcore_circuits/review/static/assets/inter-vietnamese-600-normal-BuLX-rYi.woff +0 -0
  219. quantcore_circuits/review/static/assets/inter-vietnamese-600-normal-Cc8MFFhd.woff2 +0 -0
  220. quantcore_circuits/review/static/assets/inter-vietnamese-700-normal-BZaoP0fm.woff +0 -0
  221. quantcore_circuits/review/static/assets/inter-vietnamese-700-normal-DlLaEgI2.woff2 +0 -0
  222. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-400-normal-BEIGL1Tu.woff2 +0 -0
  223. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-400-normal-ugxPyKxw.woff +0 -0
  224. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-500-normal-DJqRU3vO.woff +0 -0
  225. quantcore_circuits/review/static/assets/jetbrains-mono-cyrillic-500-normal-DmUKJPL_.woff2 +0 -0
  226. quantcore_circuits/review/static/assets/jetbrains-mono-greek-400-normal-B9oWc5Lo.woff +0 -0
  227. quantcore_circuits/review/static/assets/jetbrains-mono-greek-400-normal-C190GLew.woff2 +0 -0
  228. quantcore_circuits/review/static/assets/jetbrains-mono-greek-500-normal-D7SFKleX.woff +0 -0
  229. quantcore_circuits/review/static/assets/jetbrains-mono-greek-500-normal-JpySY46c.woff2 +0 -0
  230. quantcore_circuits/review/static/assets/jetbrains-mono-latin-400-normal-6-qcROiO.woff +0 -0
  231. quantcore_circuits/review/static/assets/jetbrains-mono-latin-400-normal-V6pRDFza.woff2 +0 -0
  232. quantcore_circuits/review/static/assets/jetbrains-mono-latin-500-normal-BWZEU5yA.woff2 +0 -0
  233. quantcore_circuits/review/static/assets/jetbrains-mono-latin-500-normal-CJOVTJB7.woff +0 -0
  234. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-400-normal-Bc8Ftmh3.woff2 +0 -0
  235. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-400-normal-fXTG6kC5.woff +0 -0
  236. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-500-normal-Cut-4mMH.woff2 +0 -0
  237. quantcore_circuits/review/static/assets/jetbrains-mono-latin-ext-500-normal-ckzbgY84.woff +0 -0
  238. quantcore_circuits/review/static/assets/jetbrains-mono-vietnamese-400-normal-CqNFfHCs.woff +0 -0
  239. quantcore_circuits/review/static/assets/jetbrains-mono-vietnamese-500-normal-DNRqzVM1.woff +0 -0
  240. quantcore_circuits/review/static/index.html +14 -0
  241. quantcore_circuits/review/static/logo-quantcore-black.png +0 -0
  242. quantcore_circuits/review/static/logo-quantcore-white.png +0 -0
  243. quantcore_circuits/review/static/sample/chip.png +0 -0
  244. quantcore_circuits/review/static/sample/chip_rev1.png +0 -0
  245. quantcore_circuits/review/static/sample/q1.png +0 -0
  246. quantcore_circuits/review/static/sample/q2.png +0 -0
  247. quantcore_circuits/review/static/sample-state.json +3747 -0
  248. quantcore_circuits/route/__init__.py +5 -0
  249. quantcore_circuits/route/router.py +694 -0
  250. quantcore_circuits/route/waveguide.py +187 -0
  251. quantcore_circuits/selftest.py +224 -0
  252. quantcore_circuits/sim_tools/__init__.py +6 -0
  253. quantcore_circuits/sim_tools/aedt_attach.py +66 -0
  254. quantcore_circuits/sim_tools/aedt_progress.py +224 -0
  255. quantcore_circuits/sim_tools/aedt_project.py +302 -0
  256. quantcore_circuits/sim_tools/aedt_scripts.py +397 -0
  257. quantcore_circuits/sim_tools/aedt_session.py +275 -0
  258. quantcore_circuits/sim_tools/ansys.py +90 -0
  259. quantcore_circuits/sim_tools/builder.py +1690 -0
  260. quantcore_circuits/sim_tools/export.py +470 -0
  261. quantcore_circuits/sim_tools/geometry_check.py +342 -0
  262. quantcore_circuits/sim_tools/hfss.py +583 -0
  263. quantcore_circuits/sim_tools/palace.py +197 -0
  264. quantcore_circuits/sim_tools/runner.py +179 -0
  265. quantcore_circuits/sim_tools/subset.py +364 -0
  266. quantcore_circuits/track.py +671 -0
  267. quantcore_circuits-0.0.1.dist-info/METADATA +204 -0
  268. quantcore_circuits-0.0.1.dist-info/RECORD +272 -0
  269. quantcore_circuits-0.0.1.dist-info/WHEEL +5 -0
  270. quantcore_circuits-0.0.1.dist-info/entry_points.txt +2 -0
  271. quantcore_circuits-0.0.1.dist-info/licenses/LICENSE +674 -0
  272. quantcore_circuits-0.0.1.dist-info/top_level.txt +1 -0
@@ -0,0 +1,375 @@
1
+ """Xmon qubit (ported from QWri ``Xmon Cross`` + ``Xmon Handle``) as a KQC ``Qubit`` with ports.
2
+
3
+ Local frame: cross centred at the origin; claws on the north/west/east arms; the junction sits in the gap below the
4
+ south arm (as in the legacy chips). Geometry is the legacy fab output: ``base_metal_gap_wo_grid`` = bounding box of
5
+ the positive metal minus the metal, computed with the same pya calls as the legacy PCell.
6
+
7
+ Ports (outward directions): ``claw_n`` (+y), ``claw_w`` (−x), ``claw_e`` (+x) at the claw tail tips, width
8
+ ``claw_tail_width``; ``flux`` (−y) at the flux-line tip below the junction when ``flux_port`` is set. The SQUID
9
+ refpoints are exposed as ``port_squid_a``/``port_squid_b`` for KQC ``JunctionSimPort``.
10
+
11
+ Claw gaps (decision #22): ``claw_spacing`` is the etched clearance around the claw body and ``ground_sliver``
12
+ the ground strip between the cross gap and that clearance (2 µm each by default). The claw *tail* is the start of
13
+ the readout CPW, so its clearance is ``claw_tail_gap`` (−1 = the element's ``b``, the chip / PDK CPW gap): a 10/6
14
+ route continues a 10/6 tail, a 10/10 route needs ``claw_tail_gap = 10`` (or a chip ``b`` of 10). The claw ports
15
+ declare exactly that gap (with ``claw_ground``: the ground frame's ``claw_ground_gap``). The legacy PCells used
16
+ ``claw_spacing`` for the tail too: ``claw_tail_gap = claw_spacing`` reproduces them.
17
+
18
+ Junction: ``junction_type`` picks the cell (``"No Squid"`` = none; ``"Quantcore Junction"`` / ``"Quantcore Squid"``
19
+ = the PDK trilayer junctions with CLEARER and spacer gradient); ``junction_params`` (a dict in ``design.json``,
20
+ stored as JSON) is passed to that cell, e.g. ``{"finger_width": 0.5, "second_finger_width": 0.6}`` for the
21
+ trilayer junctions (the legacy chips sweep the junction size) or ``{"lj_nH": 6.7}`` (sized by the PDK junction
22
+ rule, :func:`quantcore_circuits.circuit.bridges.fingers_for_lj`). ``junction_window = [w, h]`` keeps a ``w × h`` box
23
+ centred in the junction gap as metal (``base_metal_addition``, subtracted from the 1/0 etch at export): the
24
+ legacy chips' "CLEARER" step, so the trilayer bridges the cross arm and ground where the fingers (2/0, 4/0) define
25
+ the junction (chip_01: 30 × 18 µm, chip_01_creator/02: 30 × 20 µm). An optional third value moves the window centre
26
+ away from the cross (negative: towards it): chip_03 and chip_05 use ``[30, 27, -3]`` (gap 20: the window runs from
27
+ 6.5 µm inside the arm to 0.5 µm into the ground), chip_10a ``[30, 45, 12.5]`` at its junctions (from the arm end to
28
+ 25 µm into the ground, so it also clears the flux-line tip there) and ``[30, 45, -12.5]`` at its SQUIDs (shifted
29
+ 25 µm towards the cross, "cut inside"). The window is drawn by the Xmon, so it works with every
30
+ ``junction_type``.
31
+ """
32
+
33
+ import ast
34
+ import json
35
+
36
+ from kqcircuits.junctions import junction_type_choices
37
+ from kqcircuits.pya_resolver import pya
38
+ from kqcircuits.qubits.qubit import Qubit
39
+ from kqcircuits.util.parameters import Param, pdt
40
+
41
+ _CLAWS = ("n", "w", "e")
42
+
43
+
44
+ def claw_region(dbu, width, thickness, fwidth, hlength, tail, tail_l, tail_width=10.0):
45
+ """Legacy ``Xmon_handle.makeCap`` (arguments in µm, result in dbu)."""
46
+ width, thickness, fwidth = width / dbu, thickness / dbu, fwidth / dbu
47
+ hlength, tail_l, tail_width = hlength / dbu, tail_l / dbu, tail_width / dbu
48
+ base = pya.Box(-width / 2, 0, width / 2, thickness)
49
+ finger_left = pya.Box(-(width / 2 + fwidth), 0, -width / 2, hlength)
50
+ finger_right = pya.Box(width / 2, 0, (width / 2 + fwidth), hlength)
51
+ cap = pya.Region().insert([base, finger_left, finger_right])
52
+ tail_box = pya.Box(-tail_width / 2, -tail_l, tail_width / 2, 0) if tail else pya.Box()
53
+ return cap + tail_box
54
+
55
+
56
+ def ground_claw(cap, dbu, ggap, tail_l, width, thickness, hlength, path_w=10.0):
57
+ """Legacy ``Xmon_handle.groundHandle`` (arguments in µm, ``cap`` in dbu)."""
58
+ ggap, tail_l, width = ggap / dbu, tail_l / dbu, width / dbu
59
+ thickness, hlength, path_w = thickness / dbu, hlength / dbu, path_w / dbu
60
+ tailcov = pya.Region().insert(pya.Box((-path_w / 2 - ggap), (-tail_l - 2 * ggap), path_w / 2 + ggap, -tail_l))
61
+ cap_cov = pya.Region().insert(pya.Box(-width / 2, thickness, width / 2, hlength + (2 * ggap)))
62
+ grown = pya.Region().insert(cap.sized(ggap * 2, ggap).bbox()) - cap.sized(ggap, ggap)
63
+ return grown - tailcov - cap_cov + cap
64
+
65
+
66
+ def xmon_positive(
67
+ dbu,
68
+ arm_width,
69
+ cross_length,
70
+ ground_sliver,
71
+ gap,
72
+ claws,
73
+ claw_spacing,
74
+ claw_base,
75
+ claw_finger_width,
76
+ claw_length,
77
+ claw_tail,
78
+ claw_ground,
79
+ claw_ground_gap,
80
+ claw_tail_length,
81
+ claw_tail_width=10.0,
82
+ claw_tail_gap=None,
83
+ ):
84
+ """Legacy ``Xmon_cross.produce_impl`` positive metal (``fab=False``) in dbu. ``claw_tail_gap`` (µm, None = the
85
+ legacy ``claw_spacing``) is the clearance of the claw tail (without ``claw_ground``)."""
86
+ t, w = arm_width / dbu, cross_length / dbu
87
+ cross = pya.Region().insert(pya.Box(-w / 2, -t / 2, w / 2, t / 2)) + pya.Region().insert(
88
+ pya.Box(-t / 2, -w / 2, t / 2, w / 2)
89
+ )
90
+ if not cross.is_merged():
91
+ cross.merge()
92
+ # NB: two-argument Region.sized(d, mode) is *isotropic* sizing by d with corner mode `mode`; the legacy code passes
93
+ # (gap+da) as the second argument, so the ground rectangle is the cross bbox grown by `grow` on all sides.
94
+ # Kept verbatim so the geometry matches the legacy cells exactly.
95
+ grow = (gap + ground_sliver + claw_base + claw_tail_length + claw_spacing) / dbu
96
+ boundary = pya.Region().insert(cross.sized(grow, (gap + ground_sliver) / dbu).bbox()) - cross.sized(
97
+ gap / dbu, gap / dbu
98
+ )
99
+ final = cross + boundary
100
+ pad_width = arm_width + 2 * claw_ground_gap + 2 * gap + 2 * ground_sliver
101
+ x_off = (cross_length / 2 + gap + ground_sliver + claw_base + claw_spacing) / dbu
102
+ transforms = {
103
+ "n": pya.ICplxTrans(1, 0, True, 0, x_off),
104
+ "w": pya.ICplxTrans(1, 270, False, -x_off, 0),
105
+ "e": pya.ICplxTrans(1, 90, False, x_off, 0),
106
+ }
107
+ claw = claw_region(
108
+ dbu, pad_width, claw_base, claw_finger_width, claw_length, claw_tail, claw_tail_length, claw_tail_width
109
+ )
110
+ tail = None
111
+ if claw_tail and not claw_ground and claw_tail_gap is not None and claw_tail_gap != claw_spacing:
112
+ tw, tl = claw_tail_width / dbu, claw_tail_length / dbu
113
+ tail = pya.Region(pya.Box(-tw / 2, -tl, tw / 2, 0))
114
+ if claw_ground:
115
+ claw = ground_claw(claw, dbu, claw_ground_gap, claw_tail_length, pad_width, claw_base, claw_length, 10.0)
116
+ for name in claws:
117
+ placed = claw.transformed(transforms[name])
118
+ final = final - placed.sized(claw_spacing / dbu)
119
+ if tail is not None:
120
+ final -= tail.transformed(transforms[name]).sized(claw_tail_gap / dbu)
121
+ final += placed
122
+ return final
123
+
124
+
125
+ def _junction_params(text) -> dict:
126
+ """``junction_params`` (JSON, or a Python dict repr as KLayout stores a dict) → dict."""
127
+ if isinstance(text, dict):
128
+ return dict(text)
129
+ text = str(text or "").strip() or "{}"
130
+ try:
131
+ value = json.loads(text)
132
+ except ValueError:
133
+ value = ast.literal_eval(text)
134
+ if not isinstance(value, dict):
135
+ raise ValueError(f"junction_params must be a dict, got {value!r}")
136
+ return value
137
+
138
+
139
+ class Xmon(Qubit):
140
+ """Grounded cross transmon with claw couplers; junction below the south arm.
141
+
142
+ Ported from the legacy QWri PCells ``Xmon Cross`` (``pymacros/QuantumPcells/xmon_cross.lym``) and ``Xmon Handle``
143
+ (``xmon_handle.lym``), fab mode. Claw-tail ports declare ``a = claw_tail_width`` and the element ``b`` (the tail
144
+ itself is drawn with a ``claw_spacing`` clearance; a route continues as the chip CPW, see the catalog note).
145
+ """
146
+
147
+ qcc_category = "qubit"
148
+
149
+ arm_width = Param(pdt.TypeDouble, "Cross arm width", 25, unit="μm")
150
+ cross_length = Param(pdt.TypeDouble, "Cross tip-to-tip length", 300, unit="μm")
151
+ gap = Param(pdt.TypeDouble, "Gap between cross and ground", 25, unit="μm")
152
+ ground_sliver = Param(pdt.TypeDouble, "Ground between cross gap and claw clearance", 2, unit="μm")
153
+ claws = Param(pdt.TypeList, "Claws to draw (any of n, w, e)", ["n"])
154
+ claw_spacing = Param(pdt.TypeDouble, "Claw clearance to ground", 2, unit="μm")
155
+ claw_base = Param(pdt.TypeDouble, "Claw base thickness", 25, unit="μm")
156
+ claw_finger_width = Param(pdt.TypeDouble, "Claw finger width", 25, unit="μm")
157
+ claw_length = Param(pdt.TypeDouble, "Claw finger length", 100, unit="μm")
158
+ claw_tail = Param(pdt.TypeBoolean, "Claw has a tail (connection stub)", True)
159
+ claw_tail_length = Param(pdt.TypeDouble, "Claw tail length", 50, unit="μm")
160
+ claw_tail_width = Param(pdt.TypeDouble, "Claw tail width (CPW centre width at the port)", 10, unit="μm")
161
+ claw_ground = Param(pdt.TypeBoolean, "Ground frame around the claw", False)
162
+ claw_ground_gap = Param(pdt.TypeDouble, "Claw ground gap", 6, unit="μm")
163
+ claw_tail_gap = Param(
164
+ pdt.TypeDouble, "Claw tail gap to ground (= the readout CPW gap; -1 = the element's b)", -1, unit="μm"
165
+ )
166
+ flux_port = Param(pdt.TypeBoolean, "Add flux-line port and current slot below the junction", False)
167
+ flux_x = Param(pdt.TypeDouble, "Flux tip x offset from the qubit axis", -10.5, unit="μm")
168
+ flux_tip_depth = Param(pdt.TypeDouble, "Flux tip distance beyond the gap edge", 0.5, unit="μm")
169
+ flux_slot = Param(pdt.TypeList, "Flux slot size [length, width] (empty = none)", [28, 5], unit="μm")
170
+ junction_type = Param(
171
+ pdt.TypeString,
172
+ "Junction Type",
173
+ "Trilayer Junction",
174
+ choices=junction_type_choices
175
+ + ["Trilayer Junction", "Trilayer Squid", "Quantcore Junction", "Quantcore Squid"],
176
+ )
177
+ fluxline_type = Param(pdt.TypeString, "Fluxline Type (KQC)", "none")
178
+ junction_params = Param(pdt.TypeString, "Junction cell parameters (JSON dict)", "{}")
179
+ junction_window = Param(
180
+ pdt.TypeList,
181
+ "Metal window [width, height(, offset)] in the junction gap (legacy CLEARER; offset > 0 = away from the "
182
+ "cross; empty = none)",
183
+ [],
184
+ )
185
+
186
+ @classmethod
187
+ def qcc_params(cls, params: dict) -> dict:
188
+ """design.json params → PCell params: ``junction_params`` dict → JSON. Unknown parameters raise."""
189
+ params = dict(params)
190
+ unknown = sorted(set(params) - set(cls.get_schema()))
191
+ if unknown:
192
+ raise ValueError(f"Xmon: unknown parameter(s) {unknown}")
193
+ jp = params.get("junction_params")
194
+ if isinstance(jp, dict):
195
+ params["junction_params"] = json.dumps(jp, sort_keys=True)
196
+ elif isinstance(jp, str):
197
+ _junction_params(jp) # validate
198
+ return params
199
+
200
+ # ports whose connecting line is shorted to ground at the port (used by the simulation builder)
201
+ qcc_shorted_ports = ("flux",)
202
+
203
+ @classmethod
204
+ def qcc_port_widths(cls, params: dict) -> dict:
205
+ """Per-port CPW widths (a, b) as drawn: the claw tail width and its gap (``claw_tail_gap``, −1 = the
206
+ element's ``b``; with ``claw_ground`` the frame's ``claw_ground_gap``)."""
207
+ tail = params.get("claw_tail_width", 10)
208
+ return {f"claw_{c}": (tail, cls.claw_tail_gap_um(params)) for c in _CLAWS}
209
+
210
+ @classmethod
211
+ def qcc_keepout(cls, params: dict) -> list:
212
+ """3/0 keep-out (local µm): the legacy ``Xmon Cross`` ``fab_l`` shape, the cross grown isotropically by
213
+ 2·claw_base + 10 + claw_finger_width (85 µm by default)."""
214
+ from quantcore_circuits.layouts.others.keepout import DBU, dpolygons, full_params # pylint: disable=C0415
215
+
216
+ p = full_params(cls, params)
217
+ t, w = float(p["arm_width"]) / DBU, float(p["cross_length"]) / DBU
218
+ cross = pya.Region().insert(pya.Box(-w / 2, -t / 2, w / 2, t / 2)) + pya.Region().insert(
219
+ pya.Box(-t / 2, -w / 2, t / 2, w / 2)
220
+ )
221
+ grow = (2 * float(p["claw_base"]) + 10 + float(p["claw_finger_width"])) / DBU
222
+ return dpolygons(cross.merged().sized(round(grow)))
223
+
224
+ @classmethod
225
+ def claw_tail_gap_um(cls, params: dict) -> float:
226
+ """The drawn clearance of the claw tails (µm)."""
227
+ if params.get("claw_ground", False):
228
+ return float(params.get("claw_ground_gap", 6))
229
+ gap = float(params.get("claw_tail_gap", -1))
230
+ return gap if gap >= 0 else float(params.get("b", 6))
231
+
232
+ @classmethod
233
+ def qcc_lom(cls, name: str, inst, pdk):
234
+ """Grounded transmon: island (C to ground + JJ/SQUID to ground) and one coupler node per claw (C_g to the
235
+ island, C to ground). Capacitances are calibrated estimates until a C-matrix fills them (FEM nets
236
+ ``<name>.island``, ``<name>.claw_<c>``). The flux port carries a flux-bias control line."""
237
+ from quantcore_circuits.lom.calibration import estimate # pylint: disable=import-outside-toplevel
238
+ from quantcore_circuits.lom.fragment import ( # pylint: disable=C0415
239
+ Element,
240
+ Fragment,
241
+ effective_junction,
242
+ junction_kind,
243
+ junction_value,
244
+ )
245
+
246
+ params = {k: v.default for k, v in cls.get_schema().items()} | dict(inst.params)
247
+ frag = Fragment(nodes={"island": {"island": f"{name}.island"}})
248
+ c_is, src = estimate("Xmon", "C_island", params, pdk.name)
249
+ frag.elements.append(
250
+ Element(
251
+ f"C_{name}",
252
+ "C",
253
+ ("island", "gnd"),
254
+ {"estimate": c_is, "unit": "fF", "fem": "cmatrix", "estimate_source": src},
255
+ {"param": f"{name}.cross_length"},
256
+ )
257
+ )
258
+ kind = junction_kind(params.get("junction_type", "")) # None: "No Squid", a junction-less reference cross
259
+ # the design's junction, else the drawn trilayer junction on the PDK rule (components-pdk)
260
+ ej = effective_junction(inst, params, kind=kind or "JJ")
261
+ lj = ej.lj0_nH
262
+ if kind is None:
263
+ frag.notes.append(f"{name}: junction_type 'No Squid' → no junction element (island C only)")
264
+ else:
265
+ frag.elements.append(
266
+ Element(f"J_{name}", kind, ("island", "gnd"), junction_value(ej), {"param": f"{name}.junction.Lj_nH"})
267
+ )
268
+ if lj and kind is not None:
269
+ frag.knobs[f"{name}.junction.Lj_nH"] = (round(lj * 0.5, 3), round(lj * 1.5, 3))
270
+ cross = float(params["cross_length"])
271
+ frag.knobs[f"{name}.cross_length"] = (round(cross * 0.5, 1), round(cross * 1.8, 1))
272
+ for c in params.get("claws") or []:
273
+ node = f"claw_{c}"
274
+ frag.nodes[node] = {"island": f"{name}.claw_{c}"}
275
+ frag.port_nodes[node] = node
276
+ cg, src_g = estimate("Xmon", "Cg", params, pdk.name)
277
+ cc, src_c = estimate("Xmon", "C_claw", params, pdk.name)
278
+ frag.elements.append(
279
+ Element(
280
+ f"Cg_{name}_{node}",
281
+ "C",
282
+ ("island", node),
283
+ {"estimate": cg, "unit": "fF", "fem": "cmatrix", "estimate_source": src_g},
284
+ {"param": f"{name}.claw_length"},
285
+ )
286
+ )
287
+ frag.elements.append(
288
+ Element(
289
+ f"Cc_{name}_{node}",
290
+ "C",
291
+ (node, "gnd"),
292
+ {"estimate": cc, "unit": "fF", "fem": "cmatrix", "estimate_source": src_c},
293
+ )
294
+ )
295
+ claw = float(params["claw_length"])
296
+ frag.knobs[f"{name}.claw_length"] = (round(claw * 0.4, 1), round(claw * 2.2, 1))
297
+ if params.get("flux_port"):
298
+ frag.port_nodes["flux"] = "control:flux"
299
+ return frag
300
+
301
+ def _claw_tip(self, name):
302
+ x = self.cross_length / 2 + self.gap + self.ground_sliver + self.claw_base + self.claw_spacing
303
+ d = x + self.claw_tail_length
304
+ return {
305
+ "n": (pya.DPoint(0, d), pya.DVector(0, 1)),
306
+ "w": (pya.DPoint(-d, 0), pya.DVector(-1, 0)),
307
+ "e": (pya.DPoint(d, 0), pya.DVector(1, 0)),
308
+ }[name]
309
+
310
+ def build(self):
311
+ dbu = self.layout.dbu
312
+ claws = [str(c).lower() for c in self.claws]
313
+ unknown = set(claws) - set(_CLAWS)
314
+ if unknown:
315
+ self.raise_error_on_cell(f"Unknown claw(s) {sorted(unknown)}; use n, w, e")
316
+ metal = xmon_positive(
317
+ dbu,
318
+ self.arm_width,
319
+ self.cross_length,
320
+ self.ground_sliver,
321
+ self.gap,
322
+ claws,
323
+ self.claw_spacing,
324
+ self.claw_base,
325
+ self.claw_finger_width,
326
+ self.claw_length,
327
+ self.claw_tail,
328
+ self.claw_ground,
329
+ self.claw_ground_gap,
330
+ self.claw_tail_length,
331
+ self.claw_tail_width,
332
+ self.claw_tail_gap if self.claw_tail_gap >= 0 else self.b,
333
+ )
334
+ outer = pya.Region().insert(metal.bbox())
335
+ gaps = outer - metal
336
+
337
+ junction_y = -(self.cross_length / 2 + self.gap)
338
+ if self.flux_port:
339
+ tip = pya.DPoint(self.flux_x, junction_y - self.flux_tip_depth)
340
+ self.add_port("flux", tip, pya.DVector(0, -1))
341
+ if len(self.flux_slot) == 2:
342
+ length, width = float(self.flux_slot[0]), float(self.flux_slot[1])
343
+ slot = pya.DBox(tip.x, tip.y - width, tip.x + length, tip.y)
344
+ gaps += pya.Region(slot.to_itype(dbu))
345
+ self.cell.shapes(self.get_layer("base_metal_gap_wo_grid")).insert(gaps)
346
+ self.add_protection(pya.Region(gaps.bbox()).sized(self.margin / dbu))
347
+
348
+ for name in claws:
349
+ if self.claw_tail:
350
+ pos, direction = self._claw_tip(name)
351
+ self.add_port(f"claw_{name}", pos, direction)
352
+
353
+ if len(self.junction_window) in (2, 3):
354
+ w, h = float(self.junction_window[0]), float(self.junction_window[1])
355
+ dy = float(self.junction_window[2]) if len(self.junction_window) == 3 else 0.0
356
+ yc = junction_y + self.gap / 2 - dy # dy > 0 moves the window away from the cross (into the ground)
357
+ window = pya.DBox(-w / 2, yc - h / 2, w / 2, yc + h / 2)
358
+ self.cell.shapes(self.get_layer("base_metal_addition")).insert(window.to_itype(dbu))
359
+ self.refpoints["junction_window"] = window.center()
360
+ elif self.junction_window:
361
+ self.raise_error_on_cell(
362
+ f"junction_window needs [width, height] or [width, height, offset], got {list(self.junction_window)}"
363
+ )
364
+
365
+ if self.junction_type != "No Squid":
366
+ squid_trans = pya.DCplxTrans(1, 0, False, 0, junction_y)
367
+ if self.mirror_squid:
368
+ squid_trans = squid_trans * pya.DTrans.M90
369
+ squid_params = {"window_height": self.gap, **_junction_params(self.junction_params)}
370
+ squid_refs = self.produce_squid(pya.DCplxTrans(1, 0, False, 0, junction_y), **squid_params)
371
+ for ref in ("port_squid_a", "port_squid_b"):
372
+ if ref in squid_refs:
373
+ self.refpoints[ref] = squid_trans * squid_refs[ref]
374
+ self.refpoints["probe_island"] = pya.DPoint(0, 0)
375
+ self.refpoints["probe_ground"] = pya.DPoint(0, junction_y - self.gap)