pulumi-kubernetes 4.24.0a1753079574__py3-none-any.whl → 4.24.0a1753121506__py3-none-any.whl

pulumi_kubernetes/networking/v1/outputs.py

@@ -2,8 +2,7 @@
 # *** WARNING: this file was generated by pulumigen. ***
 # *** Do not edit by hand unless you're certain you know what you are doing! ***
 
-import builtins
-import copy
+import builtins as _builtins
 import warnings
 import sys
 import pulumi
@@ -100,12 +99,12 @@ class HTTPIngressPath(dict):
 
     def __init__(__self__, *,
                  backend: 'outputs.IngressBackend',
-                 path_type: builtins.str,
-                 path: Optional[builtins.str] = None):
+                 path_type: _builtins.str,
+                 path: Optional[_builtins.str] = None):
         """
         HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.
         :param 'IngressBackendArgs' backend: backend defines the referenced service endpoint to which the traffic will be forwarded to.
-        :param builtins.str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
+        :param _builtins.str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
                  done on a path element by element basis. A path element refers is the
                  list of labels in the path split by the '/' separator. A request is a
                  match for path p if every p is an element-wise prefix of p of the
@@ -116,14 +115,14 @@ class HTTPIngressPath(dict):
                  the IngressClass. Implementations can treat this as a separate PathType
                  or treat it identically to Prefix or Exact path types.
                Implementations are required to support all path types.
-        :param builtins.str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
+        :param _builtins.str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
         """
         pulumi.set(__self__, "backend", backend)
         pulumi.set(__self__, "path_type", path_type)
         if path is not None:
             pulumi.set(__self__, "path", path)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def backend(self) -> 'outputs.IngressBackend':
         """
@@ -131,9 +130,9 @@ class HTTPIngressPath(dict):
         """
         return pulumi.get(self, "backend")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="pathType")
-    def path_type(self) -> builtins.str:
+    def path_type(self) -> _builtins.str:
         """
         pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
           done on a path element by element basis. A path element refers is the
@@ -149,9 +148,9 @@ class HTTPIngressPath(dict):
         """
         return pulumi.get(self, "path_type")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def path(self) -> Optional[builtins.str]:
+    def path(self) -> Optional[_builtins.str]:
         """
         path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
         """
@@ -182,13 +181,13 @@ class HTTPIngressPathPatch(dict):
 
     def __init__(__self__, *,
                  backend: Optional['outputs.IngressBackendPatch'] = None,
-                 path: Optional[builtins.str] = None,
-                 path_type: Optional[builtins.str] = None):
+                 path: Optional[_builtins.str] = None,
+                 path_type: Optional[_builtins.str] = None):
         """
         HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.
         :param 'IngressBackendPatchArgs' backend: backend defines the referenced service endpoint to which the traffic will be forwarded to.
-        :param builtins.str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
-        :param builtins.str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
+        :param _builtins.str path: path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
+        :param _builtins.str path_type: pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
                  done on a path element by element basis. A path element refers is the
                  list of labels in the path split by the '/' separator. A request is a
                  match for path p if every p is an element-wise prefix of p of the
@@ -207,7 +206,7 @@ class HTTPIngressPathPatch(dict):
         if path_type is not None:
             pulumi.set(__self__, "path_type", path_type)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def backend(self) -> Optional['outputs.IngressBackendPatch']:
         """
@@ -215,17 +214,17 @@ class HTTPIngressPathPatch(dict):
         """
         return pulumi.get(self, "backend")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def path(self) -> Optional[builtins.str]:
+    def path(self) -> Optional[_builtins.str]:
         """
         path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/' and must be present when using PathType with value "Exact" or "Prefix".
         """
         return pulumi.get(self, "path")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="pathType")
-    def path_type(self) -> Optional[builtins.str]:
+    def path_type(self) -> Optional[_builtins.str]:
         """
         pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is
           done on a path element by element basis. A path element refers is the
@@ -255,7 +254,7 @@ class HTTPIngressRuleValue(dict):
         """
         pulumi.set(__self__, "paths", paths)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def paths(self) -> Sequence['outputs.HTTPIngressPath']:
         """
@@ -278,7 +277,7 @@ class HTTPIngressRuleValuePatch(dict):
         if paths is not None:
             pulumi.set(__self__, "paths", paths)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def paths(self) -> Optional[Sequence['outputs.HTTPIngressPathPatch']]:
         """
@@ -310,14 +309,14 @@ class IPAddress(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[builtins.str] = None,
-                 kind: Optional[builtins.str] = None,
+                 api_version: Optional[_builtins.str] = None,
+                 kind: Optional[_builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.IPAddressSpec'] = None):
         """
         IPAddress represents a single IP of a single IP Family. The object is designed to be used by APIs that operate on IP addresses. The object is used by the Service core API for allocation of IP addresses. An IP address can be represented in different formats, to guarantee the uniqueness of the IP, the name of the object is the IP address in canonical format, four decimal digits separated by dots suppressing leading zeros for IPv4 and the representation defined by RFC 5952 for IPv6. Valid: 192.168.1.5 or 2001:db8::1 or 2001:db8:aaaa:bbbb:cccc:dddd:eeee:1 Invalid: 10.01.2.3 or 2001:db8:0:0:0::1
-        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param _builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param _builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'IPAddressSpecArgs' spec: spec is the desired state of the IPAddress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
         """
@@ -330,23 +329,23 @@ class IPAddress(dict):
         if spec is not None:
             pulumi.set(__self__, "spec", spec)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[builtins.str]:
+    def api_version(self) -> Optional[_builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
         return pulumi.get(self, "api_version")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> Optional[builtins.str]:
+    def kind(self) -> Optional[_builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def metadata(self) -> Optional['_meta.v1.outputs.ObjectMeta']:
         """
@@ -354,7 +353,7 @@ class IPAddress(dict):
         """
         return pulumi.get(self, "metadata")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def spec(self) -> Optional['outputs.IPAddressSpec']:
         """
@@ -393,7 +392,7 @@ class IPAddressSpec(dict):
         """
         pulumi.set(__self__, "parent_ref", parent_ref)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="parentRef")
     def parent_ref(self) -> 'outputs.ParentReference':
         """
@@ -433,7 +432,7 @@ class IPAddressSpecPatch(dict):
         if parent_ref is not None:
             pulumi.set(__self__, "parent_ref", parent_ref)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="parentRef")
     def parent_ref(self) -> Optional['outputs.ParentReferencePatch']:
         """
@@ -465,28 +464,28 @@ class IPBlock(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 cidr: builtins.str,
-                 except_: Optional[Sequence[builtins.str]] = None):
+                 cidr: _builtins.str,
+                 except_: Optional[Sequence[_builtins.str]] = None):
         """
         IPBlock describes a particular CIDR (Ex. "192.168.1.0/24","2001:db8::/64") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.
-        :param builtins.str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
-        :param Sequence[builtins.str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
+        :param _builtins.str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
+        :param Sequence[_builtins.str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
         pulumi.set(__self__, "cidr", cidr)
         if except_ is not None:
             pulumi.set(__self__, "except_", except_)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def cidr(self) -> builtins.str:
+    def cidr(self) -> _builtins.str:
         """
         cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
         """
         return pulumi.get(self, "cidr")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="except")
-    def except_(self) -> Optional[Sequence[builtins.str]]:
+    def except_(self) -> Optional[Sequence[_builtins.str]]:
         """
         except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
@@ -516,29 +515,29 @@ class IPBlockPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 cidr: Optional[builtins.str] = None,
-                 except_: Optional[Sequence[builtins.str]] = None):
+                 cidr: Optional[_builtins.str] = None,
+                 except_: Optional[Sequence[_builtins.str]] = None):
         """
         IPBlock describes a particular CIDR (Ex. "192.168.1.0/24","2001:db8::/64") that is allowed to the pods matched by a NetworkPolicySpec's podSelector. The except entry describes CIDRs that should not be included within this rule.
-        :param builtins.str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
-        :param Sequence[builtins.str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
+        :param _builtins.str cidr: cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
+        :param Sequence[_builtins.str] except_: except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
         if cidr is not None:
             pulumi.set(__self__, "cidr", cidr)
         if except_ is not None:
             pulumi.set(__self__, "except_", except_)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def cidr(self) -> Optional[builtins.str]:
+    def cidr(self) -> Optional[_builtins.str]:
         """
         cidr is a string representing the IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64"
         """
         return pulumi.get(self, "cidr")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="except")
-    def except_(self) -> Optional[Sequence[builtins.str]]:
+    def except_(self) -> Optional[Sequence[_builtins.str]]:
         """
         except is a slice of CIDRs that should not be included within an IPBlock Valid examples are "192.168.1.0/24" or "2001:db8::/64" Except values will be rejected if they are outside the cidr range
         """
@@ -582,8 +581,8 @@ class Ingress(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[builtins.str] = None,
-                 kind: Optional[builtins.str] = None,
+                 api_version: Optional[_builtins.str] = None,
+                 kind: Optional[_builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.IngressSpec'] = None,
                  status: Optional['outputs.IngressStatus'] = None):
@@ -603,8 +602,8 @@ class Ingress(dict):
         If the Ingress has not reached a Ready state after 10 minutes, it will
         time out and mark the resource update as Failed. You can override the default timeout value
         by setting the 'customTimeouts' option on the resource.
-        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param _builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param _builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'IngressSpecArgs' spec: spec is the desired state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
         :param 'IngressStatusArgs' status: status is the current state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
@@ -620,23 +619,23 @@ class Ingress(dict):
         if status is not None:
             pulumi.set(__self__, "status", status)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[builtins.str]:
+    def api_version(self) -> Optional[_builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
         return pulumi.get(self, "api_version")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> Optional[builtins.str]:
+    def kind(self) -> Optional[_builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def metadata(self) -> Optional['_meta.v1.outputs.ObjectMeta']:
         """
@@ -644,7 +643,7 @@ class Ingress(dict):
         """
         return pulumi.get(self, "metadata")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def spec(self) -> Optional['outputs.IngressSpec']:
         """
@@ -652,7 +651,7 @@ class Ingress(dict):
         """
         return pulumi.get(self, "spec")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def status(self) -> Optional['outputs.IngressStatus']:
         """
@@ -679,7 +678,7 @@ class IngressBackend(dict):
         if service is not None:
             pulumi.set(__self__, "service", service)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def resource(self) -> Optional['_core.v1.outputs.TypedLocalObjectReference']:
         """
@@ -687,7 +686,7 @@ class IngressBackend(dict):
         """
         return pulumi.get(self, "resource")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def service(self) -> Optional['outputs.IngressServiceBackend']:
         """
@@ -714,7 +713,7 @@ class IngressBackendPatch(dict):
         if service is not None:
             pulumi.set(__self__, "service", service)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def resource(self) -> Optional['_core.v1.outputs.TypedLocalObjectReferencePatch']:
         """
@@ -722,7 +721,7 @@ class IngressBackendPatch(dict):
         """
         return pulumi.get(self, "resource")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def service(self) -> Optional['outputs.IngressServiceBackendPatch']:
         """
@@ -754,14 +753,14 @@ class IngressClass(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[builtins.str] = None,
-                 kind: Optional[builtins.str] = None,
+                 api_version: Optional[_builtins.str] = None,
+                 kind: Optional[_builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.IngressClassSpec'] = None):
         """
         IngressClass represents the class of the Ingress, referenced by the Ingress Spec. The `ingressclass.kubernetes.io/is-default-class` annotation can be used to indicate that an IngressClass should be considered default. When a single IngressClass resource has this annotation set to true, new Ingress resources without a class specified will be assigned this default class.
-        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param _builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param _builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'IngressClassSpecArgs' spec: spec is the desired state of the IngressClass. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
         """
@@ -774,23 +773,23 @@ class IngressClass(dict):
         if spec is not None:
             pulumi.set(__self__, "spec", spec)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[builtins.str]:
+    def api_version(self) -> Optional[_builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
         return pulumi.get(self, "api_version")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> Optional[builtins.str]:
+    def kind(self) -> Optional[_builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def metadata(self) -> Optional['_meta.v1.outputs.ObjectMeta']:
         """
@@ -798,7 +797,7 @@ class IngressClass(dict):
         """
         return pulumi.get(self, "metadata")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def spec(self) -> Optional['outputs.IngressClassSpec']:
         """
@@ -830,18 +829,18 @@ class IngressClassParametersReference(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 kind: builtins.str,
-                 name: builtins.str,
-                 api_group: Optional[builtins.str] = None,
-                 namespace: Optional[builtins.str] = None,
-                 scope: Optional[builtins.str] = None):
+                 kind: _builtins.str,
+                 name: _builtins.str,
+                 api_group: Optional[_builtins.str] = None,
+                 namespace: Optional[_builtins.str] = None,
+                 scope: Optional[_builtins.str] = None):
         """
         IngressClassParametersReference identifies an API object. This can be used to specify a cluster or namespace-scoped resource.
-        :param builtins.str kind: kind is the type of resource being referenced.
-        :param builtins.str name: name is the name of resource being referenced.
-        :param builtins.str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
-        :param builtins.str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
-        :param builtins.str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
+        :param _builtins.str kind: kind is the type of resource being referenced.
+        :param _builtins.str name: name is the name of resource being referenced.
+        :param _builtins.str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
+        :param _builtins.str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
+        :param _builtins.str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
         pulumi.set(__self__, "kind", kind)
         pulumi.set(__self__, "name", name)
@@ -852,41 +851,41 @@ class IngressClassParametersReference(dict):
         if scope is not None:
             pulumi.set(__self__, "scope", scope)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> builtins.str:
+    def kind(self) -> _builtins.str:
         """
         kind is the type of resource being referenced.
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> builtins.str:
+    def name(self) -> _builtins.str:
         """
         name is the name of resource being referenced.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiGroup")
-    def api_group(self) -> Optional[builtins.str]:
+    def api_group(self) -> Optional[_builtins.str]:
         """
         apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
         """
         return pulumi.get(self, "api_group")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def namespace(self) -> Optional[builtins.str]:
+    def namespace(self) -> Optional[_builtins.str]:
         """
         namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
         """
         return pulumi.get(self, "namespace")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def scope(self) -> Optional[builtins.str]:
+    def scope(self) -> Optional[_builtins.str]:
         """
         scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
@@ -916,18 +915,18 @@ class IngressClassParametersReferencePatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_group: Optional[builtins.str] = None,
-                 kind: Optional[builtins.str] = None,
-                 name: Optional[builtins.str] = None,
-                 namespace: Optional[builtins.str] = None,
-                 scope: Optional[builtins.str] = None):
+                 api_group: Optional[_builtins.str] = None,
+                 kind: Optional[_builtins.str] = None,
+                 name: Optional[_builtins.str] = None,
+                 namespace: Optional[_builtins.str] = None,
+                 scope: Optional[_builtins.str] = None):
         """
         IngressClassParametersReference identifies an API object. This can be used to specify a cluster or namespace-scoped resource.
-        :param builtins.str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
-        :param builtins.str kind: kind is the type of resource being referenced.
-        :param builtins.str name: name is the name of resource being referenced.
-        :param builtins.str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
-        :param builtins.str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
+        :param _builtins.str api_group: apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
+        :param _builtins.str kind: kind is the type of resource being referenced.
+        :param _builtins.str name: name is the name of resource being referenced.
+        :param _builtins.str namespace: namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
+        :param _builtins.str scope: scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
         if api_group is not None:
             pulumi.set(__self__, "api_group", api_group)
@@ -940,41 +939,41 @@ class IngressClassParametersReferencePatch(dict):
         if scope is not None:
             pulumi.set(__self__, "scope", scope)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiGroup")
-    def api_group(self) -> Optional[builtins.str]:
+    def api_group(self) -> Optional[_builtins.str]:
         """
         apiGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.
         """
         return pulumi.get(self, "api_group")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> Optional[builtins.str]:
+    def kind(self) -> Optional[_builtins.str]:
         """
         kind is the type of resource being referenced.
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> Optional[builtins.str]:
+    def name(self) -> Optional[_builtins.str]:
         """
         name is the name of resource being referenced.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def namespace(self) -> Optional[builtins.str]:
+    def namespace(self) -> Optional[_builtins.str]:
         """
         namespace is the namespace of the resource being referenced. This field is required when scope is set to "Namespace" and must be unset when scope is set to "Cluster".
         """
         return pulumi.get(self, "namespace")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def scope(self) -> Optional[builtins.str]:
+    def scope(self) -> Optional[_builtins.str]:
         """
         scope represents if this refers to a cluster or namespace scoped resource. This may be set to "Cluster" (default) or "Namespace".
         """
@@ -987,11 +986,11 @@ class IngressClassSpec(dict):
     IngressClassSpec provides information about the class of an Ingress.
     """
     def __init__(__self__, *,
-                 controller: Optional[builtins.str] = None,
+                 controller: Optional[_builtins.str] = None,
                  parameters: Optional['outputs.IngressClassParametersReference'] = None):
         """
         IngressClassSpec provides information about the class of an Ingress.
-        :param builtins.str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
+        :param _builtins.str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         :param 'IngressClassParametersReferenceArgs' parameters: parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.
         """
         if controller is not None:
@@ -999,15 +998,15 @@ class IngressClassSpec(dict):
         if parameters is not None:
             pulumi.set(__self__, "parameters", parameters)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def controller(self) -> Optional[builtins.str]:
+    def controller(self) -> Optional[_builtins.str]:
         """
         controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         """
         return pulumi.get(self, "controller")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def parameters(self) -> Optional['outputs.IngressClassParametersReference']:
         """
@@ -1022,11 +1021,11 @@ class IngressClassSpecPatch(dict):
     IngressClassSpec provides information about the class of an Ingress.
     """
     def __init__(__self__, *,
-                 controller: Optional[builtins.str] = None,
+                 controller: Optional[_builtins.str] = None,
                  parameters: Optional['outputs.IngressClassParametersReferencePatch'] = None):
         """
         IngressClassSpec provides information about the class of an Ingress.
-        :param builtins.str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
+        :param _builtins.str controller: controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         :param 'IngressClassParametersReferencePatchArgs' parameters: parameters is a link to a custom resource containing additional configuration for the controller. This is optional if the controller does not require extra parameters.
         """
         if controller is not None:
@@ -1034,15 +1033,15 @@ class IngressClassSpecPatch(dict):
         if parameters is not None:
             pulumi.set(__self__, "parameters", parameters)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def controller(self) -> Optional[builtins.str]:
+    def controller(self) -> Optional[_builtins.str]:
         """
         controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.
         """
         return pulumi.get(self, "controller")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def parameters(self) -> Optional['outputs.IngressClassParametersReferencePatch']:
         """
@@ -1057,13 +1056,13 @@ class IngressLoadBalancerIngress(dict):
     IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
     """
     def __init__(__self__, *,
-                 hostname: Optional[builtins.str] = None,
-                 ip: Optional[builtins.str] = None,
+                 hostname: Optional[_builtins.str] = None,
+                 ip: Optional[_builtins.str] = None,
                  ports: Optional[Sequence['outputs.IngressPortStatus']] = None):
         """
         IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
-        :param builtins.str hostname: hostname is set for load-balancer ingress points that are DNS based.
-        :param builtins.str ip: ip is set for load-balancer ingress points that are IP based.
+        :param _builtins.str hostname: hostname is set for load-balancer ingress points that are DNS based.
+        :param _builtins.str ip: ip is set for load-balancer ingress points that are IP based.
         :param Sequence['IngressPortStatusArgs'] ports: ports provides information about the ports exposed by this LoadBalancer.
         """
         if hostname is not None:
@@ -1073,23 +1072,23 @@ class IngressLoadBalancerIngress(dict):
         if ports is not None:
             pulumi.set(__self__, "ports", ports)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def hostname(self) -> Optional[builtins.str]:
+    def hostname(self) -> Optional[_builtins.str]:
         """
         hostname is set for load-balancer ingress points that are DNS based.
         """
         return pulumi.get(self, "hostname")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def ip(self) -> Optional[builtins.str]:
+    def ip(self) -> Optional[_builtins.str]:
         """
         ip is set for load-balancer ingress points that are IP based.
         """
         return pulumi.get(self, "ip")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.IngressPortStatus']]:
         """
@@ -1104,13 +1103,13 @@ class IngressLoadBalancerIngressPatch(dict):
     IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
     """
     def __init__(__self__, *,
-                 hostname: Optional[builtins.str] = None,
-                 ip: Optional[builtins.str] = None,
+                 hostname: Optional[_builtins.str] = None,
+                 ip: Optional[_builtins.str] = None,
                  ports: Optional[Sequence['outputs.IngressPortStatusPatch']] = None):
         """
         IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
-        :param builtins.str hostname: hostname is set for load-balancer ingress points that are DNS based.
-        :param builtins.str ip: ip is set for load-balancer ingress points that are IP based.
+        :param _builtins.str hostname: hostname is set for load-balancer ingress points that are DNS based.
+        :param _builtins.str ip: ip is set for load-balancer ingress points that are IP based.
         :param Sequence['IngressPortStatusPatchArgs'] ports: ports provides information about the ports exposed by this LoadBalancer.
         """
         if hostname is not None:
@@ -1120,23 +1119,23 @@ class IngressLoadBalancerIngressPatch(dict):
         if ports is not None:
             pulumi.set(__self__, "ports", ports)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def hostname(self) -> Optional[builtins.str]:
+    def hostname(self) -> Optional[_builtins.str]:
         """
         hostname is set for load-balancer ingress points that are DNS based.
         """
         return pulumi.get(self, "hostname")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def ip(self) -> Optional[builtins.str]:
+    def ip(self) -> Optional[_builtins.str]:
         """
         ip is set for load-balancer ingress points that are IP based.
         """
         return pulumi.get(self, "ip")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.IngressPortStatusPatch']]:
         """
@@ -1159,7 +1158,7 @@ class IngressLoadBalancerStatus(dict):
         if ingress is not None:
             pulumi.set(__self__, "ingress", ingress)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ingress(self) -> Optional[Sequence['outputs.IngressLoadBalancerIngress']]:
         """
@@ -1182,7 +1181,7 @@ class IngressLoadBalancerStatusPatch(dict):
         if ingress is not None:
             pulumi.set(__self__, "ingress", ingress)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ingress(self) -> Optional[Sequence['outputs.IngressLoadBalancerIngressPatch']]:
         """
@@ -1197,14 +1196,14 @@ class IngressPortStatus(dict):
     IngressPortStatus represents the error condition of a service port
     """
     def __init__(__self__, *,
-                 port: builtins.int,
-                 protocol: builtins.str,
-                 error: Optional[builtins.str] = None):
+                 port: _builtins.int,
+                 protocol: _builtins.str,
+                 error: Optional[_builtins.str] = None):
         """
         IngressPortStatus represents the error condition of a service port
-        :param builtins.int port: port is the port number of the ingress port.
-        :param builtins.str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
-        :param builtins.str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
+        :param _builtins.int port: port is the port number of the ingress port.
+        :param _builtins.str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
+        :param _builtins.str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
                  CamelCase names
                - cloud provider specific error values must have names that comply with the
                  format foo.example.com/CamelCase.
@@ -1214,25 +1213,25 @@ class IngressPortStatus(dict):
         if error is not None:
             pulumi.set(__self__, "error", error)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def port(self) -> builtins.int:
+    def port(self) -> _builtins.int:
         """
         port is the port number of the ingress port.
         """
         return pulumi.get(self, "port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def protocol(self) -> builtins.str:
+    def protocol(self) -> _builtins.str:
         """
         protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
         """
         return pulumi.get(self, "protocol")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def error(self) -> Optional[builtins.str]:
+    def error(self) -> Optional[_builtins.str]:
         """
         error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
           CamelCase names
@@ -1248,17 +1247,17 @@ class IngressPortStatusPatch(dict):
     IngressPortStatus represents the error condition of a service port
     """
     def __init__(__self__, *,
-                 error: Optional[builtins.str] = None,
-                 port: Optional[builtins.int] = None,
-                 protocol: Optional[builtins.str] = None):
+                 error: Optional[_builtins.str] = None,
+                 port: Optional[_builtins.int] = None,
+                 protocol: Optional[_builtins.str] = None):
         """
         IngressPortStatus represents the error condition of a service port
-        :param builtins.str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
+        :param _builtins.str error: error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
                  CamelCase names
                - cloud provider specific error values must have names that comply with the
                  format foo.example.com/CamelCase.
-        :param builtins.int port: port is the port number of the ingress port.
-        :param builtins.str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
+        :param _builtins.int port: port is the port number of the ingress port.
+        :param _builtins.str protocol: protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
         """
         if error is not None:
             pulumi.set(__self__, "error", error)
@@ -1267,9 +1266,9 @@ class IngressPortStatusPatch(dict):
         if protocol is not None:
             pulumi.set(__self__, "protocol", protocol)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def error(self) -> Optional[builtins.str]:
+    def error(self) -> Optional[_builtins.str]:
         """
         error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use
           CamelCase names
@@ -1278,17 +1277,17 @@ class IngressPortStatusPatch(dict):
         """
         return pulumi.get(self, "error")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def port(self) -> Optional[builtins.int]:
+    def port(self) -> Optional[_builtins.int]:
         """
         port is the port number of the ingress port.
         """
         return pulumi.get(self, "port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def protocol(self) -> Optional[builtins.str]:
+    def protocol(self) -> Optional[_builtins.str]:
         """
         protocol is the protocol of the ingress port. The supported values are: "TCP", "UDP", "SCTP"
         """
@@ -1301,11 +1300,11 @@ class IngressRule(dict):
     IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
     """
     def __init__(__self__, *,
-                 host: Optional[builtins.str] = None,
+                 host: Optional[_builtins.str] = None,
                  http: Optional['outputs.HTTPIngressRuleValue'] = None):
         """
         IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
-        :param builtins.str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
+        :param _builtins.str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
                   the IP in the Spec of the parent Ingress.
                2. The `:` delimiter is not respected because ports are not allowed.
                	  Currently the port of an Ingress is implicitly :80 for http and
@@ -1319,9 +1318,9 @@ class IngressRule(dict):
         if http is not None:
             pulumi.set(__self__, "http", http)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def host(self) -> Optional[builtins.str]:
+    def host(self) -> Optional[_builtins.str]:
         """
         host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
            the IP in the Spec of the parent Ingress.
@@ -1334,7 +1333,7 @@ class IngressRule(dict):
         """
         return pulumi.get(self, "host")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def http(self) -> Optional['outputs.HTTPIngressRuleValue']:
         return pulumi.get(self, "http")
@@ -1346,11 +1345,11 @@ class IngressRulePatch(dict):
     IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
     """
     def __init__(__self__, *,
-                 host: Optional[builtins.str] = None,
+                 host: Optional[_builtins.str] = None,
                  http: Optional['outputs.HTTPIngressRuleValuePatch'] = None):
         """
         IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
-        :param builtins.str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
+        :param _builtins.str host: host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
                   the IP in the Spec of the parent Ingress.
                2. The `:` delimiter is not respected because ports are not allowed.
                	  Currently the port of an Ingress is implicitly :80 for http and
@@ -1364,9 +1363,9 @@ class IngressRulePatch(dict):
         if http is not None:
             pulumi.set(__self__, "http", http)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def host(self) -> Optional[builtins.str]:
+    def host(self) -> Optional[_builtins.str]:
         """
         host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the "host" part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to
            the IP in the Spec of the parent Ingress.
@@ -1379,7 +1378,7 @@ class IngressRulePatch(dict):
         """
         return pulumi.get(self, "host")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def http(self) -> Optional['outputs.HTTPIngressRuleValuePatch']:
         return pulumi.get(self, "http")
@@ -1391,26 +1390,26 @@ class IngressServiceBackend(dict):
     IngressServiceBackend references a Kubernetes Service as a Backend.
     """
     def __init__(__self__, *,
-                 name: builtins.str,
+                 name: _builtins.str,
                  port: Optional['outputs.ServiceBackendPort'] = None):
         """
         IngressServiceBackend references a Kubernetes Service as a Backend.
-        :param builtins.str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
+        :param _builtins.str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
         :param 'ServiceBackendPortArgs' port: port of the referenced service. A port name or port number is required for a IngressServiceBackend.
         """
         pulumi.set(__self__, "name", name)
         if port is not None:
             pulumi.set(__self__, "port", port)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> builtins.str:
+    def name(self) -> _builtins.str:
         """
         name is the referenced service. The service must exist in the same namespace as the Ingress object.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def port(self) -> Optional['outputs.ServiceBackendPort']:
         """
@@ -1425,11 +1424,11 @@ class IngressServiceBackendPatch(dict):
     IngressServiceBackend references a Kubernetes Service as a Backend.
     """
     def __init__(__self__, *,
-                 name: Optional[builtins.str] = None,
+                 name: Optional[_builtins.str] = None,
                  port: Optional['outputs.ServiceBackendPortPatch'] = None):
         """
         IngressServiceBackend references a Kubernetes Service as a Backend.
-        :param builtins.str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
+        :param _builtins.str name: name is the referenced service. The service must exist in the same namespace as the Ingress object.
         :param 'ServiceBackendPortPatchArgs' port: port of the referenced service. A port name or port number is required for a IngressServiceBackend.
         """
         if name is not None:
@@ -1437,15 +1436,15 @@ class IngressServiceBackendPatch(dict):
         if port is not None:
             pulumi.set(__self__, "port", port)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> Optional[builtins.str]:
+    def name(self) -> Optional[_builtins.str]:
         """
         name is the referenced service. The service must exist in the same namespace as the Ingress object.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def port(self) -> Optional['outputs.ServiceBackendPortPatch']:
         """
@@ -1480,13 +1479,13 @@ class IngressSpec(dict):
 
     def __init__(__self__, *,
                  default_backend: Optional['outputs.IngressBackend'] = None,
-                 ingress_class_name: Optional[builtins.str] = None,
+                 ingress_class_name: Optional[_builtins.str] = None,
                  rules: Optional[Sequence['outputs.IngressRule']] = None,
                  tls: Optional[Sequence['outputs.IngressTLS']] = None):
         """
         IngressSpec describes the Ingress the user wishes to exist.
         :param 'IngressBackendArgs' default_backend: defaultBackend is the backend that should handle requests that don't match any rule. If Rules are not specified, DefaultBackend must be specified. If DefaultBackend is not set, the handling of requests that do not match any of the rules will be up to the Ingress controller.
-        :param builtins.str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
+        :param _builtins.str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         :param Sequence['IngressRuleArgs'] rules: rules is a list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
         :param Sequence['IngressTLSArgs'] tls: tls represents the TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.
         """
@@ -1499,7 +1498,7 @@ class IngressSpec(dict):
         if tls is not None:
             pulumi.set(__self__, "tls", tls)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="defaultBackend")
     def default_backend(self) -> Optional['outputs.IngressBackend']:
         """
@@ -1507,15 +1506,15 @@ class IngressSpec(dict):
         """
         return pulumi.get(self, "default_backend")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="ingressClassName")
-    def ingress_class_name(self) -> Optional[builtins.str]:
+    def ingress_class_name(self) -> Optional[_builtins.str]:
         """
         ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         """
         return pulumi.get(self, "ingress_class_name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def rules(self) -> Optional[Sequence['outputs.IngressRule']]:
         """
@@ -1523,7 +1522,7 @@ class IngressSpec(dict):
         """
         return pulumi.get(self, "rules")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def tls(self) -> Optional[Sequence['outputs.IngressTLS']]:
         """
@@ -1558,13 +1557,13 @@ class IngressSpecPatch(dict):
 
     def __init__(__self__, *,
                  default_backend: Optional['outputs.IngressBackendPatch'] = None,
-                 ingress_class_name: Optional[builtins.str] = None,
+                 ingress_class_name: Optional[_builtins.str] = None,
                  rules: Optional[Sequence['outputs.IngressRulePatch']] = None,
                  tls: Optional[Sequence['outputs.IngressTLSPatch']] = None):
         """
         IngressSpec describes the Ingress the user wishes to exist.
         :param 'IngressBackendPatchArgs' default_backend: defaultBackend is the backend that should handle requests that don't match any rule. If Rules are not specified, DefaultBackend must be specified. If DefaultBackend is not set, the handling of requests that do not match any of the rules will be up to the Ingress controller.
-        :param builtins.str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
+        :param _builtins.str ingress_class_name: ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         :param Sequence['IngressRulePatchArgs'] rules: rules is a list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
         :param Sequence['IngressTLSPatchArgs'] tls: tls represents the TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.
         """
@@ -1577,7 +1576,7 @@ class IngressSpecPatch(dict):
         if tls is not None:
             pulumi.set(__self__, "tls", tls)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="defaultBackend")
     def default_backend(self) -> Optional['outputs.IngressBackendPatch']:
         """
@@ -1585,15 +1584,15 @@ class IngressSpecPatch(dict):
         """
         return pulumi.get(self, "default_backend")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="ingressClassName")
-    def ingress_class_name(self) -> Optional[builtins.str]:
+    def ingress_class_name(self) -> Optional[_builtins.str]:
         """
         ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.
         """
         return pulumi.get(self, "ingress_class_name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def rules(self) -> Optional[Sequence['outputs.IngressRulePatch']]:
         """
@@ -1601,7 +1600,7 @@ class IngressSpecPatch(dict):
         """
         return pulumi.get(self, "rules")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def tls(self) -> Optional[Sequence['outputs.IngressTLSPatch']]:
         """
@@ -1641,7 +1640,7 @@ class IngressStatus(dict):
         if load_balancer is not None:
             pulumi.set(__self__, "load_balancer", load_balancer)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="loadBalancer")
     def load_balancer(self) -> Optional['outputs.IngressLoadBalancerStatus']:
         """
@@ -1681,7 +1680,7 @@ class IngressStatusPatch(dict):
         if load_balancer is not None:
             pulumi.set(__self__, "load_balancer", load_balancer)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="loadBalancer")
     def load_balancer(self) -> Optional['outputs.IngressLoadBalancerStatusPatch']:
         """
@@ -1713,29 +1712,29 @@ class IngressTLS(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 hosts: Optional[Sequence[builtins.str]] = None,
-                 secret_name: Optional[builtins.str] = None):
+                 hosts: Optional[Sequence[_builtins.str]] = None,
+                 secret_name: Optional[_builtins.str] = None):
         """
         IngressTLS describes the transport layer security associated with an ingress.
-        :param Sequence[builtins.str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
-        :param builtins.str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
+        :param Sequence[_builtins.str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
+        :param _builtins.str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
         if hosts is not None:
             pulumi.set(__self__, "hosts", hosts)
         if secret_name is not None:
             pulumi.set(__self__, "secret_name", secret_name)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def hosts(self) -> Optional[Sequence[builtins.str]]:
+    def hosts(self) -> Optional[Sequence[_builtins.str]]:
         """
         hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
         """
         return pulumi.get(self, "hosts")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="secretName")
-    def secret_name(self) -> Optional[builtins.str]:
+    def secret_name(self) -> Optional[_builtins.str]:
         """
         secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
@@ -1765,29 +1764,29 @@ class IngressTLSPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 hosts: Optional[Sequence[builtins.str]] = None,
-                 secret_name: Optional[builtins.str] = None):
+                 hosts: Optional[Sequence[_builtins.str]] = None,
+                 secret_name: Optional[_builtins.str] = None):
         """
         IngressTLS describes the transport layer security associated with an ingress.
-        :param Sequence[builtins.str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
-        :param builtins.str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
+        :param Sequence[_builtins.str] hosts: hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
+        :param _builtins.str secret_name: secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
         if hosts is not None:
             pulumi.set(__self__, "hosts", hosts)
         if secret_name is not None:
             pulumi.set(__self__, "secret_name", secret_name)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def hosts(self) -> Optional[Sequence[builtins.str]]:
+    def hosts(self) -> Optional[Sequence[_builtins.str]]:
         """
         hosts is a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
         """
         return pulumi.get(self, "hosts")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="secretName")
-    def secret_name(self) -> Optional[builtins.str]:
+    def secret_name(self) -> Optional[_builtins.str]:
         """
         secretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the "Host" header field used by an IngressRule, the SNI host is used for termination and value of the "Host" header is used for routing.
         """
@@ -1817,15 +1816,15 @@ class NetworkPolicy(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[builtins.str] = None,
-                 kind: Optional[builtins.str] = None,
+                 api_version: Optional[_builtins.str] = None,
+                 kind: Optional[_builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.NetworkPolicySpec'] = None,
                  status: Optional['outputs.NetworkPolicyStatus'] = None):
         """
         NetworkPolicy describes what network traffic is allowed for a set of Pods
-        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param _builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param _builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'NetworkPolicySpecArgs' spec: spec represents the specification of the desired behavior for this NetworkPolicy.
         :param 'NetworkPolicyStatusArgs' status: Status is the current state of the NetworkPolicy. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
@@ -1841,23 +1840,23 @@ class NetworkPolicy(dict):
         if status is not None:
             pulumi.set(__self__, "status", status)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[builtins.str]:
+    def api_version(self) -> Optional[_builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
         return pulumi.get(self, "api_version")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> Optional[builtins.str]:
+    def kind(self) -> Optional[_builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def metadata(self) -> Optional['_meta.v1.outputs.ObjectMeta']:
         """
@@ -1865,7 +1864,7 @@ class NetworkPolicy(dict):
         """
         return pulumi.get(self, "metadata")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def spec(self) -> Optional['outputs.NetworkPolicySpec']:
         """
@@ -1873,7 +1872,7 @@ class NetworkPolicy(dict):
         """
         return pulumi.get(self, "spec")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def status(self) -> Optional['outputs.NetworkPolicyStatus']:
         """
@@ -1900,7 +1899,7 @@ class NetworkPolicyEgressRule(dict):
         if to is not None:
             pulumi.set(__self__, "to", to)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.NetworkPolicyPort']]:
         """
@@ -1908,7 +1907,7 @@ class NetworkPolicyEgressRule(dict):
         """
         return pulumi.get(self, "ports")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def to(self) -> Optional[Sequence['outputs.NetworkPolicyPeer']]:
         """
@@ -1935,7 +1934,7 @@ class NetworkPolicyEgressRulePatch(dict):
         if to is not None:
             pulumi.set(__self__, "to", to)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.NetworkPolicyPortPatch']]:
         """
@@ -1943,7 +1942,7 @@ class NetworkPolicyEgressRulePatch(dict):
         """
         return pulumi.get(self, "ports")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def to(self) -> Optional[Sequence['outputs.NetworkPolicyPeerPatch']]:
         """
@@ -1987,7 +1986,7 @@ class NetworkPolicyIngressRule(dict):
         if ports is not None:
             pulumi.set(__self__, "ports", ports)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="from")
     def from_(self) -> Optional[Sequence['outputs.NetworkPolicyPeer']]:
         """
@@ -1995,7 +1994,7 @@ class NetworkPolicyIngressRule(dict):
         """
         return pulumi.get(self, "from_")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.NetworkPolicyPort']]:
         """
@@ -2039,7 +2038,7 @@ class NetworkPolicyIngressRulePatch(dict):
         if ports is not None:
             pulumi.set(__self__, "ports", ports)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="from")
     def from_(self) -> Optional[Sequence['outputs.NetworkPolicyPeerPatch']]:
         """
@@ -2047,7 +2046,7 @@ class NetworkPolicyIngressRulePatch(dict):
         """
         return pulumi.get(self, "from_")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.NetworkPolicyPortPatch']]:
         """
@@ -2103,7 +2102,7 @@ class NetworkPolicyPeer(dict):
         if pod_selector is not None:
             pulumi.set(__self__, "pod_selector", pod_selector)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="ipBlock")
     def ip_block(self) -> Optional['outputs.IPBlock']:
         """
@@ -2111,7 +2110,7 @@ class NetworkPolicyPeer(dict):
         """
         return pulumi.get(self, "ip_block")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="namespaceSelector")
     def namespace_selector(self) -> Optional['_meta.v1.outputs.LabelSelector']:
         """
@@ -2121,7 +2120,7 @@ class NetworkPolicyPeer(dict):
         """
         return pulumi.get(self, "namespace_selector")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="podSelector")
     def pod_selector(self) -> Optional['_meta.v1.outputs.LabelSelector']:
         """
@@ -2179,7 +2178,7 @@ class NetworkPolicyPeerPatch(dict):
         if pod_selector is not None:
             pulumi.set(__self__, "pod_selector", pod_selector)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="ipBlock")
     def ip_block(self) -> Optional['outputs.IPBlockPatch']:
         """
@@ -2187,7 +2186,7 @@ class NetworkPolicyPeerPatch(dict):
         """
         return pulumi.get(self, "ip_block")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="namespaceSelector")
     def namespace_selector(self) -> Optional['_meta.v1.outputs.LabelSelectorPatch']:
         """
@@ -2197,7 +2196,7 @@ class NetworkPolicyPeerPatch(dict):
         """
         return pulumi.get(self, "namespace_selector")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="podSelector")
     def pod_selector(self) -> Optional['_meta.v1.outputs.LabelSelectorPatch']:
         """
@@ -2231,14 +2230,14 @@ class NetworkPolicyPort(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 end_port: Optional[builtins.int] = None,
+                 end_port: Optional[_builtins.int] = None,
                  port: Optional[Any] = None,
-                 protocol: Optional[builtins.str] = None):
+                 protocol: Optional[_builtins.str] = None):
         """
         NetworkPolicyPort describes a port to allow traffic on
-        :param builtins.int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
-        :param Union[builtins.int, builtins.str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
-        :param builtins.str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
+        :param _builtins.int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
+        :param Union[_builtins.int, _builtins.str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
+        :param _builtins.str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
         if end_port is not None:
             pulumi.set(__self__, "end_port", end_port)
@@ -2247,15 +2246,15 @@ class NetworkPolicyPort(dict):
         if protocol is not None:
             pulumi.set(__self__, "protocol", protocol)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="endPort")
-    def end_port(self) -> Optional[builtins.int]:
+    def end_port(self) -> Optional[_builtins.int]:
         """
         endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
         """
         return pulumi.get(self, "end_port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def port(self) -> Optional[Any]:
         """
@@ -2263,9 +2262,9 @@ class NetworkPolicyPort(dict):
         """
         return pulumi.get(self, "port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def protocol(self) -> Optional[builtins.str]:
+    def protocol(self) -> Optional[_builtins.str]:
         """
         protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
@@ -2295,14 +2294,14 @@ class NetworkPolicyPortPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 end_port: Optional[builtins.int] = None,
+                 end_port: Optional[_builtins.int] = None,
                  port: Optional[Any] = None,
-                 protocol: Optional[builtins.str] = None):
+                 protocol: Optional[_builtins.str] = None):
         """
         NetworkPolicyPort describes a port to allow traffic on
-        :param builtins.int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
-        :param Union[builtins.int, builtins.str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
-        :param builtins.str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
+        :param _builtins.int end_port: endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
+        :param Union[_builtins.int, _builtins.str] port: port represents the port on the given protocol. This can either be a numerical or named port on a pod. If this field is not provided, this matches all port names and numbers. If present, only traffic on the specified protocol AND port will be matched.
+        :param _builtins.str protocol: protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
         if end_port is not None:
             pulumi.set(__self__, "end_port", end_port)
@@ -2311,15 +2310,15 @@ class NetworkPolicyPortPatch(dict):
         if protocol is not None:
             pulumi.set(__self__, "protocol", protocol)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="endPort")
-    def end_port(self) -> Optional[builtins.int]:
+    def end_port(self) -> Optional[_builtins.int]:
         """
         endPort indicates that the range of ports from port to endPort if set, inclusive, should be allowed by the policy. This field cannot be defined if the port field is not defined or if the port field is defined as a named (string) port. The endPort must be equal or greater than port.
         """
         return pulumi.get(self, "end_port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def port(self) -> Optional[Any]:
         """
@@ -2327,9 +2326,9 @@ class NetworkPolicyPortPatch(dict):
         """
         return pulumi.get(self, "port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def protocol(self) -> Optional[builtins.str]:
+    def protocol(self) -> Optional[_builtins.str]:
         """
         protocol represents the protocol (TCP, UDP, or SCTP) which traffic must match. If not specified, this field defaults to TCP.
         """
@@ -2364,13 +2363,13 @@ class NetworkPolicySpec(dict):
                  pod_selector: '_meta.v1.outputs.LabelSelector',
                  egress: Optional[Sequence['outputs.NetworkPolicyEgressRule']] = None,
                  ingress: Optional[Sequence['outputs.NetworkPolicyIngressRule']] = None,
-                 policy_types: Optional[Sequence[builtins.str]] = None):
+                 policy_types: Optional[Sequence[_builtins.str]] = None):
         """
         NetworkPolicySpec provides the specification of a NetworkPolicy
         :param '_meta.v1.LabelSelectorArgs' pod_selector: podSelector selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.
         :param Sequence['NetworkPolicyEgressRuleArgs'] egress: egress is a list of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8
         :param Sequence['NetworkPolicyIngressRuleArgs'] ingress: ingress is a list of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)
-        :param Sequence[builtins.str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
+        :param Sequence[_builtins.str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
         pulumi.set(__self__, "pod_selector", pod_selector)
         if egress is not None:
@@ -2380,7 +2379,7 @@ class NetworkPolicySpec(dict):
         if policy_types is not None:
             pulumi.set(__self__, "policy_types", policy_types)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="podSelector")
     def pod_selector(self) -> '_meta.v1.outputs.LabelSelector':
         """
@@ -2388,7 +2387,7 @@ class NetworkPolicySpec(dict):
         """
         return pulumi.get(self, "pod_selector")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def egress(self) -> Optional[Sequence['outputs.NetworkPolicyEgressRule']]:
         """
@@ -2396,7 +2395,7 @@ class NetworkPolicySpec(dict):
         """
         return pulumi.get(self, "egress")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ingress(self) -> Optional[Sequence['outputs.NetworkPolicyIngressRule']]:
         """
@@ -2404,9 +2403,9 @@ class NetworkPolicySpec(dict):
         """
         return pulumi.get(self, "ingress")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="policyTypes")
-    def policy_types(self) -> Optional[Sequence[builtins.str]]:
+    def policy_types(self) -> Optional[Sequence[_builtins.str]]:
         """
         policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
@@ -2441,13 +2440,13 @@ class NetworkPolicySpecPatch(dict):
                  egress: Optional[Sequence['outputs.NetworkPolicyEgressRulePatch']] = None,
                  ingress: Optional[Sequence['outputs.NetworkPolicyIngressRulePatch']] = None,
                  pod_selector: Optional['_meta.v1.outputs.LabelSelectorPatch'] = None,
-                 policy_types: Optional[Sequence[builtins.str]] = None):
+                 policy_types: Optional[Sequence[_builtins.str]] = None):
         """
         NetworkPolicySpec provides the specification of a NetworkPolicy
         :param Sequence['NetworkPolicyEgressRulePatchArgs'] egress: egress is a list of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8
         :param Sequence['NetworkPolicyIngressRulePatchArgs'] ingress: ingress is a list of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)
         :param '_meta.v1.LabelSelectorPatchArgs' pod_selector: podSelector selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.
-        :param Sequence[builtins.str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
+        :param Sequence[_builtins.str] policy_types: policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
         if egress is not None:
             pulumi.set(__self__, "egress", egress)
@@ -2458,7 +2457,7 @@ class NetworkPolicySpecPatch(dict):
         if policy_types is not None:
             pulumi.set(__self__, "policy_types", policy_types)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def egress(self) -> Optional[Sequence['outputs.NetworkPolicyEgressRulePatch']]:
         """
@@ -2466,7 +2465,7 @@ class NetworkPolicySpecPatch(dict):
         """
         return pulumi.get(self, "egress")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ingress(self) -> Optional[Sequence['outputs.NetworkPolicyIngressRulePatch']]:
         """
@@ -2474,7 +2473,7 @@ class NetworkPolicySpecPatch(dict):
         """
         return pulumi.get(self, "ingress")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="podSelector")
     def pod_selector(self) -> Optional['_meta.v1.outputs.LabelSelectorPatch']:
         """
@@ -2482,9 +2481,9 @@ class NetworkPolicySpecPatch(dict):
         """
         return pulumi.get(self, "pod_selector")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="policyTypes")
-    def policy_types(self) -> Optional[Sequence[builtins.str]]:
+    def policy_types(self) -> Optional[Sequence[_builtins.str]]:
         """
         policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8
         """
@@ -2505,7 +2504,7 @@ class NetworkPolicyStatus(dict):
         if conditions is not None:
             pulumi.set(__self__, "conditions", conditions)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def conditions(self) -> Optional[Sequence['_meta.v1.outputs.Condition']]:
         """
@@ -2528,7 +2527,7 @@ class NetworkPolicyStatusPatch(dict):
         if conditions is not None:
             pulumi.set(__self__, "conditions", conditions)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def conditions(self) -> Optional[Sequence['_meta.v1.outputs.ConditionPatch']]:
         """
@@ -2543,16 +2542,16 @@ class ParentReference(dict):
     ParentReference describes a reference to a parent object.
     """
     def __init__(__self__, *,
-                 name: builtins.str,
-                 resource: builtins.str,
-                 group: Optional[builtins.str] = None,
-                 namespace: Optional[builtins.str] = None):
+                 name: _builtins.str,
+                 resource: _builtins.str,
+                 group: Optional[_builtins.str] = None,
+                 namespace: Optional[_builtins.str] = None):
         """
         ParentReference describes a reference to a parent object.
-        :param builtins.str name: Name is the name of the object being referenced.
-        :param builtins.str resource: Resource is the resource of the object being referenced.
-        :param builtins.str group: Group is the group of the object being referenced.
-        :param builtins.str namespace: Namespace is the namespace of the object being referenced.
+        :param _builtins.str name: Name is the name of the object being referenced.
+        :param _builtins.str resource: Resource is the resource of the object being referenced.
+        :param _builtins.str group: Group is the group of the object being referenced.
+        :param _builtins.str namespace: Namespace is the namespace of the object being referenced.
         """
         pulumi.set(__self__, "name", name)
         pulumi.set(__self__, "resource", resource)
@@ -2561,33 +2560,33 @@ class ParentReference(dict):
         if namespace is not None:
             pulumi.set(__self__, "namespace", namespace)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> builtins.str:
+    def name(self) -> _builtins.str:
         """
         Name is the name of the object being referenced.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def resource(self) -> builtins.str:
+    def resource(self) -> _builtins.str:
         """
         Resource is the resource of the object being referenced.
         """
         return pulumi.get(self, "resource")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def group(self) -> Optional[builtins.str]:
+    def group(self) -> Optional[_builtins.str]:
         """
         Group is the group of the object being referenced.
         """
         return pulumi.get(self, "group")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def namespace(self) -> Optional[builtins.str]:
+    def namespace(self) -> Optional[_builtins.str]:
         """
         Namespace is the namespace of the object being referenced.
         """
@@ -2600,16 +2599,16 @@ class ParentReferencePatch(dict):
     ParentReference describes a reference to a parent object.
     """
     def __init__(__self__, *,
-                 group: Optional[builtins.str] = None,
-                 name: Optional[builtins.str] = None,
-                 namespace: Optional[builtins.str] = None,
-                 resource: Optional[builtins.str] = None):
+                 group: Optional[_builtins.str] = None,
+                 name: Optional[_builtins.str] = None,
+                 namespace: Optional[_builtins.str] = None,
+                 resource: Optional[_builtins.str] = None):
         """
         ParentReference describes a reference to a parent object.
-        :param builtins.str group: Group is the group of the object being referenced.
-        :param builtins.str name: Name is the name of the object being referenced.
-        :param builtins.str namespace: Namespace is the namespace of the object being referenced.
-        :param builtins.str resource: Resource is the resource of the object being referenced.
+        :param _builtins.str group: Group is the group of the object being referenced.
+        :param _builtins.str name: Name is the name of the object being referenced.
+        :param _builtins.str namespace: Namespace is the namespace of the object being referenced.
+        :param _builtins.str resource: Resource is the resource of the object being referenced.
         """
         if group is not None:
             pulumi.set(__self__, "group", group)
@@ -2620,33 +2619,33 @@ class ParentReferencePatch(dict):
         if resource is not None:
             pulumi.set(__self__, "resource", resource)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def group(self) -> Optional[builtins.str]:
+    def group(self) -> Optional[_builtins.str]:
         """
         Group is the group of the object being referenced.
         """
         return pulumi.get(self, "group")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> Optional[builtins.str]:
+    def name(self) -> Optional[_builtins.str]:
         """
         Name is the name of the object being referenced.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def namespace(self) -> Optional[builtins.str]:
+    def namespace(self) -> Optional[_builtins.str]:
         """
         Namespace is the namespace of the object being referenced.
         """
         return pulumi.get(self, "namespace")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def resource(self) -> Optional[builtins.str]:
+    def resource(self) -> Optional[_builtins.str]:
         """
         Resource is the resource of the object being referenced.
         """
@@ -2659,29 +2658,29 @@ class ServiceBackendPort(dict):
     ServiceBackendPort is the service port being referenced.
     """
     def __init__(__self__, *,
-                 name: Optional[builtins.str] = None,
-                 number: Optional[builtins.int] = None):
+                 name: Optional[_builtins.str] = None,
+                 number: Optional[_builtins.int] = None):
         """
         ServiceBackendPort is the service port being referenced.
-        :param builtins.str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
-        :param builtins.int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
+        :param _builtins.str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
+        :param _builtins.int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """
         if name is not None:
             pulumi.set(__self__, "name", name)
         if number is not None:
             pulumi.set(__self__, "number", number)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> Optional[builtins.str]:
+    def name(self) -> Optional[_builtins.str]:
         """
         name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def number(self) -> Optional[builtins.int]:
+    def number(self) -> Optional[_builtins.int]:
         """
         number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """
@@ -2694,29 +2693,29 @@ class ServiceBackendPortPatch(dict):
     ServiceBackendPort is the service port being referenced.
     """
     def __init__(__self__, *,
-                 name: Optional[builtins.str] = None,
-                 number: Optional[builtins.int] = None):
+                 name: Optional[_builtins.str] = None,
+                 number: Optional[_builtins.int] = None):
         """
         ServiceBackendPort is the service port being referenced.
-        :param builtins.str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
-        :param builtins.int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
+        :param _builtins.str name: name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
+        :param _builtins.int number: number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """
         if name is not None:
             pulumi.set(__self__, "name", name)
         if number is not None:
             pulumi.set(__self__, "number", number)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> Optional[builtins.str]:
+    def name(self) -> Optional[_builtins.str]:
         """
         name is the name of the port on the Service. This is a mutually exclusive setting with "Number".
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def number(self) -> Optional[builtins.int]:
+    def number(self) -> Optional[_builtins.int]:
         """
         number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with "Name".
         """
@@ -2746,15 +2745,15 @@ class ServiceCIDR(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 api_version: Optional[builtins.str] = None,
-                 kind: Optional[builtins.str] = None,
+                 api_version: Optional[_builtins.str] = None,
+                 kind: Optional[_builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  spec: Optional['outputs.ServiceCIDRSpec'] = None,
                  status: Optional['outputs.ServiceCIDRStatus'] = None):
         """
         ServiceCIDR defines a range of IP addresses using CIDR format (e.g. 192.168.0.0/24 or 2001:db2::/64). This range is used to allocate ClusterIPs to Service objects.
-        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param _builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param _builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
         :param 'ServiceCIDRSpecArgs' spec: spec is the desired state of the ServiceCIDR. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
         :param 'ServiceCIDRStatusArgs' status: status represents the current state of the ServiceCIDR. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
@@ -2770,23 +2769,23 @@ class ServiceCIDR(dict):
         if status is not None:
             pulumi.set(__self__, "status", status)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[builtins.str]:
+    def api_version(self) -> Optional[_builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
         return pulumi.get(self, "api_version")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> Optional[builtins.str]:
+    def kind(self) -> Optional[_builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def metadata(self) -> Optional['_meta.v1.outputs.ObjectMeta']:
         """
@@ -2794,7 +2793,7 @@ class ServiceCIDR(dict):
         """
         return pulumi.get(self, "metadata")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def spec(self) -> Optional['outputs.ServiceCIDRSpec']:
         """
@@ -2802,7 +2801,7 @@ class ServiceCIDR(dict):
         """
         return pulumi.get(self, "spec")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def status(self) -> Optional['outputs.ServiceCIDRStatus']:
         """
@@ -2817,17 +2816,17 @@ class ServiceCIDRSpec(dict):
     ServiceCIDRSpec define the CIDRs the user wants to use for allocating ClusterIPs for Services.
     """
     def __init__(__self__, *,
-                 cidrs: Optional[Sequence[builtins.str]] = None):
+                 cidrs: Optional[Sequence[_builtins.str]] = None):
         """
         ServiceCIDRSpec define the CIDRs the user wants to use for allocating ClusterIPs for Services.
-        :param Sequence[builtins.str] cidrs: CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.
+        :param Sequence[_builtins.str] cidrs: CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.
         """
         if cidrs is not None:
             pulumi.set(__self__, "cidrs", cidrs)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def cidrs(self) -> Optional[Sequence[builtins.str]]:
+    def cidrs(self) -> Optional[Sequence[_builtins.str]]:
         """
         CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.
         """
@@ -2840,17 +2839,17 @@ class ServiceCIDRSpecPatch(dict):
     ServiceCIDRSpec define the CIDRs the user wants to use for allocating ClusterIPs for Services.
     """
     def __init__(__self__, *,
-                 cidrs: Optional[Sequence[builtins.str]] = None):
+                 cidrs: Optional[Sequence[_builtins.str]] = None):
         """
         ServiceCIDRSpec define the CIDRs the user wants to use for allocating ClusterIPs for Services.
-        :param Sequence[builtins.str] cidrs: CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.
+        :param Sequence[_builtins.str] cidrs: CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.
         """
         if cidrs is not None:
             pulumi.set(__self__, "cidrs", cidrs)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def cidrs(self) -> Optional[Sequence[builtins.str]]:
+    def cidrs(self) -> Optional[Sequence[_builtins.str]]:
         """
         CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. This field is immutable.
         """
@@ -2871,7 +2870,7 @@ class ServiceCIDRStatus(dict):
         if conditions is not None:
             pulumi.set(__self__, "conditions", conditions)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def conditions(self) -> Optional[Sequence['_meta.v1.outputs.Condition']]:
         """
@@ -2894,7 +2893,7 @@ class ServiceCIDRStatusPatch(dict):
         if conditions is not None:
             pulumi.set(__self__, "conditions", conditions)
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def conditions(self) -> Optional[Sequence['_meta.v1.outputs.ConditionPatch']]:
         """