pulumi-kubernetes 4.24.0a1753079574__py3-none-any.whl → 4.24.0a1753121506__py3-none-any.whl

pulumi_kubernetes/discovery/v1beta1/outputs.py

@@ -2,8 +2,7 @@
 # *** WARNING: this file was generated by pulumigen. ***
 # *** Do not edit by hand unless you're certain you know what you are doing! ***
 
-import builtins
-import copy
+import builtins as _builtins
 import warnings
 import sys
 import pulumi
@@ -53,20 +52,20 @@ class Endpoint(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 addresses: Sequence[builtins.str],
+                 addresses: Sequence[_builtins.str],
                  conditions: Optional['outputs.EndpointConditions'] = None,
-                 hostname: Optional[builtins.str] = None,
-                 node_name: Optional[builtins.str] = None,
+                 hostname: Optional[_builtins.str] = None,
+                 node_name: Optional[_builtins.str] = None,
                  target_ref: Optional['_core.v1.outputs.ObjectReference'] = None,
-                 topology: Optional[Mapping[str, builtins.str]] = None):
+                 topology: Optional[Mapping[str, _builtins.str]] = None):
         """
         Endpoint represents a single logical "backend" implementing a service.
-        :param Sequence[builtins.str] addresses: addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100.
+        :param Sequence[_builtins.str] addresses: addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100.
         :param 'EndpointConditionsArgs' conditions: conditions contains information about the current status of the endpoint.
-        :param builtins.str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must pass DNS Label (RFC 1123) validation.
-        :param builtins.str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node. This field can be enabled with the EndpointSliceNodeName feature gate.
+        :param _builtins.str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must pass DNS Label (RFC 1123) validation.
+        :param _builtins.str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node. This field can be enabled with the EndpointSliceNodeName feature gate.
         :param '_core.v1.ObjectReferenceArgs' target_ref: targetRef is a reference to a Kubernetes object that represents this endpoint.
-        :param Mapping[str, builtins.str] topology: topology contains arbitrary topology information associated with the endpoint. These key/value pairs must conform with the label format. https://kubernetes.io/docs/concepts/overview/working-with-objects/labels Topology may include a maximum of 16 key/value pairs. This includes, but is not limited to the following well known keys: * kubernetes.io/hostname: the value indicates the hostname of the node
+        :param Mapping[str, _builtins.str] topology: topology contains arbitrary topology information associated with the endpoint. These key/value pairs must conform with the label format. https://kubernetes.io/docs/concepts/overview/working-with-objects/labels Topology may include a maximum of 16 key/value pairs. This includes, but is not limited to the following well known keys: * kubernetes.io/hostname: the value indicates the hostname of the node
                  where the endpoint is located. This should match the corresponding
                  node label.
                * topology.kubernetes.io/zone: the value indicates the zone where the
@@ -86,15 +85,15 @@ class Endpoint(dict):
         if topology is not None:
             pulumi.set(__self__, "topology", topology)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def addresses(self) -> Sequence[builtins.str]:
+    def addresses(self) -> Sequence[_builtins.str]:
         """
         addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100.
         """
         return pulumi.get(self, "addresses")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def conditions(self) -> Optional['outputs.EndpointConditions']:
         """
@@ -102,23 +101,23 @@ class Endpoint(dict):
         """
         return pulumi.get(self, "conditions")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def hostname(self) -> Optional[builtins.str]:
+    def hostname(self) -> Optional[_builtins.str]:
         """
         hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must pass DNS Label (RFC 1123) validation.
         """
         return pulumi.get(self, "hostname")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="nodeName")
-    def node_name(self) -> Optional[builtins.str]:
+    def node_name(self) -> Optional[_builtins.str]:
         """
         nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node. This field can be enabled with the EndpointSliceNodeName feature gate.
         """
         return pulumi.get(self, "node_name")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="targetRef")
     def target_ref(self) -> Optional['_core.v1.outputs.ObjectReference']:
         """
@@ -126,9 +125,9 @@ class Endpoint(dict):
         """
         return pulumi.get(self, "target_ref")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def topology(self) -> Optional[Mapping[str, builtins.str]]:
+    def topology(self) -> Optional[Mapping[str, _builtins.str]]:
         """
         topology contains arbitrary topology information associated with the endpoint. These key/value pairs must conform with the label format. https://kubernetes.io/docs/concepts/overview/working-with-objects/labels Topology may include a maximum of 16 key/value pairs. This includes, but is not limited to the following well known keys: * kubernetes.io/hostname: the value indicates the hostname of the node
           where the endpoint is located. This should match the corresponding
@@ -147,14 +146,14 @@ class EndpointConditions(dict):
     EndpointConditions represents the current condition of an endpoint.
     """
     def __init__(__self__, *,
-                 ready: Optional[builtins.bool] = None,
-                 serving: Optional[builtins.bool] = None,
-                 terminating: Optional[builtins.bool] = None):
+                 ready: Optional[_builtins.bool] = None,
+                 serving: Optional[_builtins.bool] = None,
+                 terminating: Optional[_builtins.bool] = None):
         """
         EndpointConditions represents the current condition of an endpoint.
-        :param builtins.bool ready: ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready.
-        :param builtins.bool serving: serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
-        :param builtins.bool terminating: terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
+        :param _builtins.bool ready: ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready.
+        :param _builtins.bool serving: serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
+        :param _builtins.bool terminating: terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
         """
         if ready is not None:
             pulumi.set(__self__, "ready", ready)
@@ -163,25 +162,25 @@ class EndpointConditions(dict):
         if terminating is not None:
             pulumi.set(__self__, "terminating", terminating)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def ready(self) -> Optional[builtins.bool]:
+    def ready(self) -> Optional[_builtins.bool]:
         """
         ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready.
         """
         return pulumi.get(self, "ready")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def serving(self) -> Optional[builtins.bool]:
+    def serving(self) -> Optional[_builtins.bool]:
         """
         serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
         """
         return pulumi.get(self, "serving")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def terminating(self) -> Optional[builtins.bool]:
+    def terminating(self) -> Optional[_builtins.bool]:
         """
         terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
         """
@@ -194,14 +193,14 @@ class EndpointConditionsPatch(dict):
     EndpointConditions represents the current condition of an endpoint.
     """
     def __init__(__self__, *,
-                 ready: Optional[builtins.bool] = None,
-                 serving: Optional[builtins.bool] = None,
-                 terminating: Optional[builtins.bool] = None):
+                 ready: Optional[_builtins.bool] = None,
+                 serving: Optional[_builtins.bool] = None,
+                 terminating: Optional[_builtins.bool] = None):
         """
         EndpointConditions represents the current condition of an endpoint.
-        :param builtins.bool ready: ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready.
-        :param builtins.bool serving: serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
-        :param builtins.bool terminating: terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
+        :param _builtins.bool ready: ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready.
+        :param _builtins.bool serving: serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
+        :param _builtins.bool terminating: terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
         """
         if ready is not None:
             pulumi.set(__self__, "ready", ready)
@@ -210,25 +209,25 @@ class EndpointConditionsPatch(dict):
         if terminating is not None:
             pulumi.set(__self__, "terminating", terminating)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def ready(self) -> Optional[builtins.bool]:
+    def ready(self) -> Optional[_builtins.bool]:
         """
         ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready.
         """
         return pulumi.get(self, "ready")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def serving(self) -> Optional[builtins.bool]:
+    def serving(self) -> Optional[_builtins.bool]:
         """
         serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
         """
         return pulumi.get(self, "serving")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def terminating(self) -> Optional[builtins.bool]:
+    def terminating(self) -> Optional[_builtins.bool]:
         """
         terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating. This field can be enabled with the EndpointSliceTerminatingCondition feature gate.
         """
@@ -260,20 +259,20 @@ class EndpointPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 addresses: Optional[Sequence[builtins.str]] = None,
+                 addresses: Optional[Sequence[_builtins.str]] = None,
                  conditions: Optional['outputs.EndpointConditionsPatch'] = None,
-                 hostname: Optional[builtins.str] = None,
-                 node_name: Optional[builtins.str] = None,
+                 hostname: Optional[_builtins.str] = None,
+                 node_name: Optional[_builtins.str] = None,
                  target_ref: Optional['_core.v1.outputs.ObjectReferencePatch'] = None,
-                 topology: Optional[Mapping[str, builtins.str]] = None):
+                 topology: Optional[Mapping[str, _builtins.str]] = None):
         """
         Endpoint represents a single logical "backend" implementing a service.
-        :param Sequence[builtins.str] addresses: addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100.
+        :param Sequence[_builtins.str] addresses: addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100.
         :param 'EndpointConditionsPatchArgs' conditions: conditions contains information about the current status of the endpoint.
-        :param builtins.str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must pass DNS Label (RFC 1123) validation.
-        :param builtins.str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node. This field can be enabled with the EndpointSliceNodeName feature gate.
+        :param _builtins.str hostname: hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must pass DNS Label (RFC 1123) validation.
+        :param _builtins.str node_name: nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node. This field can be enabled with the EndpointSliceNodeName feature gate.
         :param '_core.v1.ObjectReferencePatchArgs' target_ref: targetRef is a reference to a Kubernetes object that represents this endpoint.
-        :param Mapping[str, builtins.str] topology: topology contains arbitrary topology information associated with the endpoint. These key/value pairs must conform with the label format. https://kubernetes.io/docs/concepts/overview/working-with-objects/labels Topology may include a maximum of 16 key/value pairs. This includes, but is not limited to the following well known keys: * kubernetes.io/hostname: the value indicates the hostname of the node
+        :param Mapping[str, _builtins.str] topology: topology contains arbitrary topology information associated with the endpoint. These key/value pairs must conform with the label format. https://kubernetes.io/docs/concepts/overview/working-with-objects/labels Topology may include a maximum of 16 key/value pairs. This includes, but is not limited to the following well known keys: * kubernetes.io/hostname: the value indicates the hostname of the node
                  where the endpoint is located. This should match the corresponding
                  node label.
                * topology.kubernetes.io/zone: the value indicates the zone where the
@@ -294,15 +293,15 @@ class EndpointPatch(dict):
         if topology is not None:
             pulumi.set(__self__, "topology", topology)
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def addresses(self) -> Optional[Sequence[builtins.str]]:
+    def addresses(self) -> Optional[Sequence[_builtins.str]]:
         """
         addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100.
         """
         return pulumi.get(self, "addresses")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def conditions(self) -> Optional['outputs.EndpointConditionsPatch']:
         """
@@ -310,23 +309,23 @@ class EndpointPatch(dict):
         """
         return pulumi.get(self, "conditions")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def hostname(self) -> Optional[builtins.str]:
+    def hostname(self) -> Optional[_builtins.str]:
         """
         hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must pass DNS Label (RFC 1123) validation.
         """
         return pulumi.get(self, "hostname")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="nodeName")
-    def node_name(self) -> Optional[builtins.str]:
+    def node_name(self) -> Optional[_builtins.str]:
         """
         nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node. This field can be enabled with the EndpointSliceNodeName feature gate.
         """
         return pulumi.get(self, "node_name")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="targetRef")
     def target_ref(self) -> Optional['_core.v1.outputs.ObjectReferencePatch']:
         """
@@ -334,9 +333,9 @@ class EndpointPatch(dict):
         """
         return pulumi.get(self, "target_ref")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def topology(self) -> Optional[Mapping[str, builtins.str]]:
+    def topology(self) -> Optional[Mapping[str, _builtins.str]]:
         """
         topology contains arbitrary topology information associated with the endpoint. These key/value pairs must conform with the label format. https://kubernetes.io/docs/concepts/overview/working-with-objects/labels Topology may include a maximum of 16 key/value pairs. This includes, but is not limited to the following well known keys: * kubernetes.io/hostname: the value indicates the hostname of the node
           where the endpoint is located. This should match the corresponding
@@ -372,16 +371,16 @@ class EndpointPort(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 app_protocol: Optional[builtins.str] = None,
-                 name: Optional[builtins.str] = None,
-                 port: Optional[builtins.int] = None,
-                 protocol: Optional[builtins.str] = None):
+                 app_protocol: Optional[_builtins.str] = None,
+                 name: Optional[_builtins.str] = None,
+                 port: Optional[_builtins.int] = None,
+                 protocol: Optional[_builtins.str] = None):
         """
         EndpointPort represents a Port used by an EndpointSlice
-        :param builtins.str app_protocol: The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names. Default is empty string.
-        :param builtins.str name: The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
-        :param builtins.int port: The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
-        :param builtins.str protocol: The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
+        :param _builtins.str app_protocol: The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names. Default is empty string.
+        :param _builtins.str name: The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
+        :param _builtins.int port: The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
+        :param _builtins.str protocol: The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
         if app_protocol is not None:
             pulumi.set(__self__, "app_protocol", app_protocol)
@@ -392,33 +391,33 @@ class EndpointPort(dict):
         if protocol is not None:
             pulumi.set(__self__, "protocol", protocol)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="appProtocol")
-    def app_protocol(self) -> Optional[builtins.str]:
+    def app_protocol(self) -> Optional[_builtins.str]:
         """
         The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names. Default is empty string.
         """
         return pulumi.get(self, "app_protocol")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> Optional[builtins.str]:
+    def name(self) -> Optional[_builtins.str]:
         """
         The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def port(self) -> Optional[builtins.int]:
+    def port(self) -> Optional[_builtins.int]:
         """
         The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
         """
         return pulumi.get(self, "port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def protocol(self) -> Optional[builtins.str]:
+    def protocol(self) -> Optional[_builtins.str]:
         """
         The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
@@ -448,16 +447,16 @@ class EndpointPortPatch(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 app_protocol: Optional[builtins.str] = None,
-                 name: Optional[builtins.str] = None,
-                 port: Optional[builtins.int] = None,
-                 protocol: Optional[builtins.str] = None):
+                 app_protocol: Optional[_builtins.str] = None,
+                 name: Optional[_builtins.str] = None,
+                 port: Optional[_builtins.int] = None,
+                 protocol: Optional[_builtins.str] = None):
         """
         EndpointPort represents a Port used by an EndpointSlice
-        :param builtins.str app_protocol: The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names. Default is empty string.
-        :param builtins.str name: The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
-        :param builtins.int port: The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
-        :param builtins.str protocol: The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
+        :param _builtins.str app_protocol: The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names. Default is empty string.
+        :param _builtins.str name: The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
+        :param _builtins.int port: The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
+        :param _builtins.str protocol: The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
         if app_protocol is not None:
             pulumi.set(__self__, "app_protocol", app_protocol)
@@ -468,33 +467,33 @@ class EndpointPortPatch(dict):
         if protocol is not None:
             pulumi.set(__self__, "protocol", protocol)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="appProtocol")
-    def app_protocol(self) -> Optional[builtins.str]:
+    def app_protocol(self) -> Optional[_builtins.str]:
         """
         The application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and http://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names. Default is empty string.
         """
         return pulumi.get(self, "app_protocol")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def name(self) -> Optional[builtins.str]:
+    def name(self) -> Optional[_builtins.str]:
         """
         The name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is dervied from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
         """
         return pulumi.get(self, "name")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def port(self) -> Optional[builtins.int]:
+    def port(self) -> Optional[_builtins.int]:
         """
         The port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
         """
         return pulumi.get(self, "port")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def protocol(self) -> Optional[builtins.str]:
+    def protocol(self) -> Optional[_builtins.str]:
         """
         The IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
         """
@@ -526,18 +525,18 @@ class EndpointSlice(dict):
         return super().get(key, default)
 
     def __init__(__self__, *,
-                 address_type: builtins.str,
+                 address_type: _builtins.str,
                  endpoints: Sequence['outputs.Endpoint'],
-                 api_version: Optional[builtins.str] = None,
-                 kind: Optional[builtins.str] = None,
+                 api_version: Optional[_builtins.str] = None,
+                 kind: Optional[_builtins.str] = None,
                  metadata: Optional['_meta.v1.outputs.ObjectMeta'] = None,
                  ports: Optional[Sequence['outputs.EndpointPort']] = None):
         """
         EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.
-        :param builtins.str address_type: addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
+        :param _builtins.str address_type: addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
         :param Sequence['EndpointArgs'] endpoints: endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
-        :param builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
-        :param builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
+        :param _builtins.str api_version: APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
+        :param _builtins.str kind: Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         :param '_meta.v1.ObjectMetaArgs' metadata: Standard object's metadata.
         :param Sequence['EndpointPortArgs'] ports: ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
         """
@@ -552,15 +551,15 @@ class EndpointSlice(dict):
         if ports is not None:
             pulumi.set(__self__, "ports", ports)
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="addressType")
-    def address_type(self) -> builtins.str:
+    def address_type(self) -> _builtins.str:
         """
         addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
         """
         return pulumi.get(self, "address_type")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def endpoints(self) -> Sequence['outputs.Endpoint']:
         """
@@ -568,23 +567,23 @@ class EndpointSlice(dict):
         """
         return pulumi.get(self, "endpoints")
 
-    @property
+    @_builtins.property
     @pulumi.getter(name="apiVersion")
-    def api_version(self) -> Optional[builtins.str]:
+    def api_version(self) -> Optional[_builtins.str]:
         """
         APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
         """
         return pulumi.get(self, "api_version")
 
-    @property
+    @_builtins.property
     @pulumi.getter
-    def kind(self) -> Optional[builtins.str]:
+    def kind(self) -> Optional[_builtins.str]:
         """
         Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
         """
         return pulumi.get(self, "kind")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def metadata(self) -> Optional['_meta.v1.outputs.ObjectMeta']:
         """
@@ -592,7 +591,7 @@ class EndpointSlice(dict):
         """
         return pulumi.get(self, "metadata")
 
-    @property
+    @_builtins.property
     @pulumi.getter
     def ports(self) -> Optional[Sequence['outputs.EndpointPort']]:
         """

pulumi_kubernetes/events/__init__.py

@@ -2,7 +2,7 @@
 # *** WARNING: this file was generated by pulumigen. ***
 # *** Do not edit by hand unless you're certain you know what you are doing! ***
 
-import builtins
+import builtins as _builtins
 from .. import _utilities
 import typing