opentrons 8.2.0a3__py2.py3-none-any.whl → 8.3.0__py2.py3-none-any.whl

opentrons/protocol_engine/commands/thermocycler/set_target_block_temperature.py

@@ -1,9 +1,10 @@
 """Command models to start heating a Thermocycler's block."""
 from __future__ import annotations
-from typing import Optional, TYPE_CHECKING
+from typing import Optional, TYPE_CHECKING, Any
 from typing_extensions import Literal, Type
 
 from pydantic import BaseModel, Field
+from pydantic.json_schema import SkipJsonSchema
 
 from ..command import AbstractCommandImpl, BaseCommand, BaseCommandCreate, SuccessData
 from ...errors.error_occurrence import ErrorOccurrence
@@ -16,21 +17,27 @@ if TYPE_CHECKING:
 SetTargetBlockTemperatureCommandType = Literal["thermocycler/setTargetBlockTemperature"]
 
 
+def _remove_default(s: dict[str, Any]) -> None:
+    s.pop("default", None)
+
+
 class SetTargetBlockTemperatureParams(BaseModel):
     """Input parameters to set a Thermocycler's target block temperature."""
 
     moduleId: str = Field(..., description="Unique ID of the Thermocycler Module.")
     celsius: float = Field(..., description="Target temperature in °C.")
-    blockMaxVolumeUl: Optional[float] = Field(
+    blockMaxVolumeUl: float | SkipJsonSchema[None] = Field(
         None,
         description="Amount of liquid in uL of the most-full well"
         " in labware loaded onto the thermocycler.",
+        json_schema_extra=_remove_default,
     )
-    holdTimeSeconds: Optional[float] = Field(
+    holdTimeSeconds: float | SkipJsonSchema[None] = Field(
         None,
         description="Amount of time, in seconds, to hold the temperature for."
         " If specified, a waitForBlockTemperature command will block until"
         " the given hold time has elapsed.",
+        json_schema_extra=_remove_default,
     )
 
 
@@ -113,7 +120,7 @@ class SetTargetBlockTemperature(
         "thermocycler/setTargetBlockTemperature"
     )
     params: SetTargetBlockTemperatureParams
-    result: Optional[SetTargetBlockTemperatureResult]
+    result: Optional[SetTargetBlockTemperatureResult] = None
 
     _ImplementationCls: Type[
         SetTargetBlockTemperatureImpl

opentrons/protocol_engine/commands/thermocycler/set_target_lid_temperature.py

@@ -84,7 +84,7 @@ class SetTargetLidTemperature(
         "thermocycler/setTargetLidTemperature"
     )
     params: SetTargetLidTemperatureParams
-    result: Optional[SetTargetLidTemperatureResult]
+    result: Optional[SetTargetLidTemperatureResult] = None
 
     _ImplementationCls: Type[SetTargetLidTemperatureImpl] = SetTargetLidTemperatureImpl
 

opentrons/protocol_engine/commands/thermocycler/wait_for_block_temperature.py

@@ -77,7 +77,7 @@ class WaitForBlockTemperature(
         "thermocycler/waitForBlockTemperature"
     )
     params: WaitForBlockTemperatureParams
-    result: Optional[WaitForBlockTemperatureResult]
+    result: Optional[WaitForBlockTemperatureResult] = None
 
     _ImplementationCls: Type[WaitForBlockTemperatureImpl] = WaitForBlockTemperatureImpl
 

opentrons/protocol_engine/commands/thermocycler/wait_for_lid_temperature.py

@@ -75,7 +75,7 @@ class WaitForLidTemperature(
 
     commandType: WaitForLidTemperatureCommandType = "thermocycler/waitForLidTemperature"
     params: WaitForLidTemperatureParams
-    result: Optional[WaitForLidTemperatureResult]
+    result: Optional[WaitForLidTemperatureResult] = None
 
     _ImplementationCls: Type[WaitForLidTemperatureImpl] = WaitForLidTemperatureImpl
 

opentrons/protocol_engine/commands/touch_tip.py

@@ -1,29 +1,50 @@
 """Touch tip command request, result, and implementation models."""
+
 from __future__ import annotations
-from pydantic import Field
-from typing import TYPE_CHECKING, Optional, Type
+from typing import TYPE_CHECKING, Optional, Type, Any
+
 from typing_extensions import Literal
+from pydantic import Field
+from pydantic.json_schema import SkipJsonSchema
 
-from opentrons.protocol_engine.state import update_types
+from opentrons.types import Point
 
-from ..errors import TouchTipDisabledError, LabwareIsTipRackError
+from ..errors import (
+    TouchTipDisabledError,
+    TouchTipIncompatibleArgumentsError,
+    LabwareIsTipRackError,
+)
 from ..types import DeckPoint
-from .command import AbstractCommandImpl, BaseCommand, BaseCommandCreate, SuccessData
-from ..errors.error_occurrence import ErrorOccurrence
+from .command import (
+    AbstractCommandImpl,
+    BaseCommand,
+    BaseCommandCreate,
+    SuccessData,
+    DefinedErrorData,
+)
 from .pipetting_common import (
     PipetteIdMixin,
+)
+from .movement_common import (
     WellLocationMixin,
     DestinationPositionResult,
+    StallOrCollisionError,
+    move_to_well,
 )
 
 if TYPE_CHECKING:
     from ..execution import MovementHandler, GantryMover
     from ..state.state import StateView
+    from ..resources.model_utils import ModelUtils
 
 
 TouchTipCommandType = Literal["touchTip"]
 
 
+def _remove_default(s: dict[str, Any]) -> None:
+    s.pop("default", None)
+
+
 class TouchTipParams(PipetteIdMixin, WellLocationMixin):
     """Payload needed to touch a pipette tip the sides of a specific well."""
 
@@ -34,12 +55,20 @@ class TouchTipParams(PipetteIdMixin, WellLocationMixin):
         ),
     )
 
-    speed: Optional[float] = Field(
+    mmFromEdge: float | SkipJsonSchema[None] = Field(
+        None,
+        description="Offset away from the the well edge, in millimeters."
+        "Incompatible when a radius is included as a non 1.0 value.",
+        json_schema_extra=_remove_default,
+    )
+
+    speed: float | SkipJsonSchema[None] = Field(
         None,
         description=(
             "Override the travel speed in mm/s."
             " This controls the straight linear speed of motion."
         ),
+        json_schema_extra=_remove_default,
     )
 
 
@@ -50,7 +79,10 @@ class TouchTipResult(DestinationPositionResult):
 
 
 class TouchTipImplementation(
-    AbstractCommandImpl[TouchTipParams, SuccessData[TouchTipResult]]
+    AbstractCommandImpl[
+        TouchTipParams,
+        SuccessData[TouchTipResult] | DefinedErrorData[StallOrCollisionError],
+    ]
 ):
     """Touch tip command implementation."""
 
@@ -59,19 +91,26 @@ class TouchTipImplementation(
         state_view: StateView,
         movement: MovementHandler,
         gantry_mover: GantryMover,
+        model_utils: ModelUtils,
         **kwargs: object,
     ) -> None:
         self._state_view = state_view
         self._movement = movement
         self._gantry_mover = gantry_mover
+        self._model_utils = model_utils
 
-    async def execute(self, params: TouchTipParams) -> SuccessData[TouchTipResult]:
+    async def execute(
+        self, params: TouchTipParams
+    ) -> SuccessData[TouchTipResult] | DefinedErrorData[StallOrCollisionError]:
         """Touch tip to sides of a well using the requested pipette."""
         pipette_id = params.pipetteId
         labware_id = params.labwareId
         well_name = params.wellName
 
-        state_update = update_types.StateUpdate()
+        if params.radius != 1.0 and params.mmFromEdge is not None:
+            raise TouchTipIncompatibleArgumentsError(
+                "Cannot use mmFromEdge with a radius that is not 1.0"
+            )
 
         if self._state_view.labware.get_has_quirk(labware_id, "touchTipDisabled"):
             raise TouchTipDisabledError(
@@ -81,23 +120,33 @@ class TouchTipImplementation(
         if self._state_view.labware.is_tiprack(labware_id):
             raise LabwareIsTipRackError("Cannot touch tip on tip rack")
 
-        center_point = await self._movement.move_to_well(
+        center_result = await move_to_well(
+            movement=self._movement,
+            model_utils=self._model_utils,
             pipette_id=pipette_id,
             labware_id=labware_id,
             well_name=well_name,
             well_location=params.wellLocation,
         )
+        if isinstance(center_result, DefinedErrorData):
+            return center_result
 
         touch_speed = self._state_view.pipettes.get_movement_speed(
             pipette_id, params.speed
         )
 
+        mm_from_edge = params.mmFromEdge if params.mmFromEdge is not None else 0
         touch_waypoints = self._state_view.motion.get_touch_tip_waypoints(
             pipette_id=pipette_id,
             labware_id=labware_id,
             well_name=well_name,
             radius=params.radius,
-            center_point=center_point,
+            mm_from_edge=mm_from_edge,
+            center_point=Point(
+                center_result.public.position.x,
+                center_result.public.position.y,
+                center_result.public.position.z,
+            ),
         )
 
         final_point = await self._gantry_mover.move_to(
@@ -105,10 +154,10 @@ class TouchTipImplementation(
             waypoints=touch_waypoints,
             speed=touch_speed,
         )
-        final_deck_point = DeckPoint.construct(
+        final_deck_point = DeckPoint.model_construct(
             x=final_point.x, y=final_point.y, z=final_point.z
         )
-        state_update.set_pipette_location(
+        state_update = center_result.state_update.set_pipette_location(
             pipette_id=pipette_id,
             new_labware_id=labware_id,
             new_well_name=well_name,
@@ -121,12 +170,12 @@ class TouchTipImplementation(
         )
 
 
-class TouchTip(BaseCommand[TouchTipParams, TouchTipResult, ErrorOccurrence]):
+class TouchTip(BaseCommand[TouchTipParams, TouchTipResult, StallOrCollisionError]):
     """Touch up tip command model."""
 
     commandType: TouchTipCommandType = "touchTip"
     params: TouchTipParams
-    result: Optional[TouchTipResult]
+    result: Optional[TouchTipResult] = None
 
     _ImplementationCls: Type[TouchTipImplementation] = TouchTipImplementation
 

opentrons/protocol_engine/commands/unsafe/unsafe_blow_out_in_place.py

@@ -10,6 +10,7 @@ from ..command import AbstractCommandImpl, BaseCommand, BaseCommandCreate, Succe
 from ..pipetting_common import PipetteIdMixin, FlowRateMixin
 from ...resources import ensure_ot3_hardware
 from ...errors.error_occurrence import ErrorOccurrence
+from ...state import update_types
 
 from opentrons.hardware_control import HardwareControlAPI
 from opentrons.hardware_control.types import Axis
@@ -66,9 +67,11 @@ class UnsafeBlowOutInPlaceImplementation(
         await self._pipetting.blow_out_in_place(
             pipette_id=params.pipetteId, flow_rate=params.flowRate
         )
+        state_update = update_types.StateUpdate()
+        state_update.set_fluid_empty(pipette_id=params.pipetteId)
 
         return SuccessData(
-            public=UnsafeBlowOutInPlaceResult(),
+            public=UnsafeBlowOutInPlaceResult(), state_update=state_update
         )
 
 
@@ -79,7 +82,7 @@ class UnsafeBlowOutInPlace(
 
     commandType: UnsafeBlowOutInPlaceCommandType = "unsafe/blowOutInPlace"
     params: UnsafeBlowOutInPlaceParams
-    result: Optional[UnsafeBlowOutInPlaceResult]
+    result: Optional[UnsafeBlowOutInPlaceResult] = None
 
     _ImplementationCls: Type[
         UnsafeBlowOutInPlaceImplementation

opentrons/protocol_engine/commands/unsafe/unsafe_drop_tip_in_place.py

@@ -1,13 +1,16 @@
 """Command models to drop tip in place while plunger positions are unknown."""
+
 from __future__ import annotations
-from opentrons.protocol_engine.state.update_types import StateUpdate
+from typing import TYPE_CHECKING, Optional, Type, Any
+
 from pydantic import Field, BaseModel
-from typing import TYPE_CHECKING, Optional, Type
+from pydantic.json_schema import SkipJsonSchema
 from typing_extensions import Literal
 
 from opentrons.hardware_control import HardwareControlAPI
 from opentrons.hardware_control.types import Axis
 
+from opentrons.protocol_engine.state.update_types import StateUpdate
 from ..pipetting_common import PipetteIdMixin
 from ..command import AbstractCommandImpl, BaseCommand, BaseCommandCreate, SuccessData
 from ...errors.error_occurrence import ErrorOccurrence
@@ -21,16 +24,21 @@ if TYPE_CHECKING:
 UnsafeDropTipInPlaceCommandType = Literal["unsafe/dropTipInPlace"]
 
 
+def _remove_default(s: dict[str, Any]) -> None:
+    s.pop("default", None)
+
+
 class UnsafeDropTipInPlaceParams(PipetteIdMixin):
     """Payload required to drop a tip in place even if the plunger position is not known."""
 
-    homeAfter: Optional[bool] = Field(
+    homeAfter: bool | SkipJsonSchema[None] = Field(
         None,
         description=(
             "Whether to home this pipette's plunger after dropping the tip."
             " You should normally leave this unspecified to let the robot choose"
             " a safe default depending on its hardware."
         ),
+        json_schema_extra=_remove_default,
     )
 
 
@@ -77,6 +85,7 @@ class UnsafeDropTipInPlaceImplementation(
         state_update.update_pipette_tip_state(
             pipette_id=params.pipetteId, tip_geometry=None
         )
+        state_update.set_fluid_unknown(pipette_id=params.pipetteId)
 
         return SuccessData(
             public=UnsafeDropTipInPlaceResult(), state_update=state_update
@@ -90,7 +99,7 @@ class UnsafeDropTipInPlace(
 
     commandType: UnsafeDropTipInPlaceCommandType = "unsafe/dropTipInPlace"
     params: UnsafeDropTipInPlaceParams
-    result: Optional[UnsafeDropTipInPlaceResult]
+    result: Optional[UnsafeDropTipInPlaceResult] = None
 
     _ImplementationCls: Type[
         UnsafeDropTipInPlaceImplementation

opentrons/protocol_engine/commands/unsafe/unsafe_engage_axes.py

@@ -52,10 +52,7 @@ class UnsafeEngageAxesImplementation(
         """Enable exes."""
         ot3_hardware_api = ensure_ot3_hardware(self._hardware_api)
         await ot3_hardware_api.engage_axes(
-            [
-                self._gantry_mover.motor_axis_to_hardware_axis(axis)
-                for axis in params.axes
-            ]
+            self._gantry_mover.motor_axes_to_present_hardware_axes(params.axes)
         )
         return SuccessData(
             public=UnsafeEngageAxesResult(),
@@ -69,7 +66,7 @@ class UnsafeEngageAxes(
 
     commandType: UnsafeEngageAxesCommandType = "unsafe/engageAxes"
     params: UnsafeEngageAxesParams
-    result: Optional[UnsafeEngageAxesResult]
+    result: Optional[UnsafeEngageAxesResult] = None
 
     _ImplementationCls: Type[
         UnsafeEngageAxesImplementation

opentrons/protocol_engine/commands/unsafe/unsafe_place_labware.py

@@ -192,7 +192,7 @@ class UnsafePlaceLabware(
 
     commandType: UnsafePlaceLabwareCommandType = "unsafe/placeLabware"
     params: UnsafePlaceLabwareParams
-    result: Optional[UnsafePlaceLabwareResult]
+    result: Optional[UnsafePlaceLabwareResult] = None
 
     _ImplementationCls: Type[
         UnsafePlaceLabwareImplementation

opentrons/protocol_engine/commands/unsafe/unsafe_ungrip_labware.py

@@ -1,6 +1,8 @@
 """Ungrip labware payload, result, and implementaiton."""
 
 from __future__ import annotations
+
+from opentrons.hardware_control.types import Axis
 from opentrons.protocol_engine.errors.exceptions import GripperNotAttachedError
 from pydantic import BaseModel
 from typing import Optional, Type
@@ -46,7 +48,7 @@ class UnsafeUngripLabwareImplementation(
         ot3_hardware_api = ensure_ot3_hardware(self._hardware_api)
         if not ot3_hardware_api.has_gripper():
             raise GripperNotAttachedError("No gripper found to perform ungrip.")
-        await ot3_hardware_api.ungrip()
+        await ot3_hardware_api.home([Axis.G])
         return SuccessData(
             public=UnsafeUngripLabwareResult(),
         )
@@ -59,7 +61,7 @@ class UnsafeUngripLabware(
 
     commandType: UnsafeUngripLabwareCommandType = "unsafe/ungripLabware"
     params: UnsafeUngripLabwareParams
-    result: Optional[UnsafeUngripLabwareResult]
+    result: Optional[UnsafeUngripLabwareResult] = None
 
     _ImplementationCls: Type[
         UnsafeUngripLabwareImplementation

opentrons/protocol_engine/commands/unsafe/update_position_estimators.py

@@ -58,10 +58,7 @@ class UpdatePositionEstimatorsImplementation(
         """Update axis position estimators from their encoders."""
         ot3_hardware_api = ensure_ot3_hardware(self._hardware_api)
         await ot3_hardware_api.update_axis_position_estimations(
-            [
-                self._gantry_mover.motor_axis_to_hardware_axis(axis)
-                for axis in params.axes
-            ]
+            self._gantry_mover.motor_axes_to_present_hardware_axes(params.axes)
         )
         return SuccessData(
             public=UpdatePositionEstimatorsResult(),
@@ -77,7 +74,7 @@ class UpdatePositionEstimators(
 
     commandType: UpdatePositionEstimatorsCommandType = "unsafe/updatePositionEstimators"
     params: UpdatePositionEstimatorsParams
-    result: Optional[UpdatePositionEstimatorsResult]
+    result: Optional[UpdatePositionEstimatorsResult] = None
 
     _ImplementationCls: Type[
         UpdatePositionEstimatorsImplementation

opentrons/protocol_engine/commands/verify_tip_presence.py

@@ -1,8 +1,9 @@
 """Verify tip presence command request, result and implementation models."""
 from __future__ import annotations
+from typing import TYPE_CHECKING, Optional, Type, Any
 
 from pydantic import Field, BaseModel
-from typing import TYPE_CHECKING, Optional, Type
+from pydantic.json_schema import SkipJsonSchema
 from typing_extensions import Literal
 
 from .pipetting_common import PipetteIdMixin
@@ -18,14 +19,20 @@ if TYPE_CHECKING:
 VerifyTipPresenceCommandType = Literal["verifyTipPresence"]
 
 
+def _remove_default(s: dict[str, Any]) -> None:
+    s.pop("default", None)
+
+
 class VerifyTipPresenceParams(PipetteIdMixin):
     """Payload required for a VerifyTipPresence command."""
 
     expectedState: TipPresenceStatus = Field(
         ..., description="The expected tip presence status on the pipette."
     )
-    followSingularSensor: Optional[InstrumentSensorId] = Field(
-        default=None, description="The sensor id to follow if the other can be ignored."
+    followSingularSensor: InstrumentSensorId | SkipJsonSchema[None] = Field(
+        default=None,
+        description="The sensor id to follow if the other can be ignored.",
+        json_schema_extra=_remove_default,
     )
 
 
@@ -77,7 +84,7 @@ class VerifyTipPresence(
 
     commandType: VerifyTipPresenceCommandType = "verifyTipPresence"
     params: VerifyTipPresenceParams
-    result: Optional[VerifyTipPresenceResult]
+    result: Optional[VerifyTipPresenceResult] = None
 
     _ImplementationCls: Type[
         VerifyTipPresenceImplementation

opentrons/protocol_engine/commands/wait_for_duration.py

@@ -1,7 +1,9 @@
 """Wait for duration command request, result, and implementation models."""
 from __future__ import annotations
+from typing import TYPE_CHECKING, Optional, Type, Any
+
 from pydantic import BaseModel, Field
-from typing import TYPE_CHECKING, Optional, Type
+from pydantic.json_schema import SkipJsonSchema
 from typing_extensions import Literal
 
 from .command import AbstractCommandImpl, BaseCommand, BaseCommandCreate, SuccessData
@@ -14,13 +16,18 @@ if TYPE_CHECKING:
 WaitForDurationCommandType = Literal["waitForDuration"]
 
 
+def _remove_default(s: dict[str, Any]) -> None:
+    s.pop("default", None)
+
+
 class WaitForDurationParams(BaseModel):
     """Payload required to pause the protocol."""
 
     seconds: float = Field(..., description="Duration, in seconds, to wait for.")
-    message: Optional[str] = Field(
+    message: str | SkipJsonSchema[None] = Field(
         None,
         description="A user-facing message associated with the pause",
+        json_schema_extra=_remove_default,
     )
 
 
@@ -53,7 +60,7 @@ class WaitForDuration(
 
     commandType: WaitForDurationCommandType = "waitForDuration"
     params: WaitForDurationParams
-    result: Optional[WaitForDurationResult]
+    result: Optional[WaitForDurationResult] = None
 
     _ImplementationCls: Type[
         WaitForDurationImplementation

opentrons/protocol_engine/commands/wait_for_resume.py

@@ -1,7 +1,9 @@
 """Wait for resume command request, result, and implementation models."""
 from __future__ import annotations
+from typing import TYPE_CHECKING, Optional, Type, Any
+
 from pydantic import BaseModel, Field
-from typing import TYPE_CHECKING, Optional, Type
+from pydantic.json_schema import SkipJsonSchema
 from typing_extensions import Literal
 
 from .command import AbstractCommandImpl, BaseCommand, BaseCommandCreate, SuccessData
@@ -16,12 +18,17 @@ if TYPE_CHECKING:
 WaitForResumeCommandType = Literal["waitForResume", "pause"]
 
 
+def _remove_default(s: dict[str, Any]) -> None:
+    s.pop("default", None)
+
+
 class WaitForResumeParams(BaseModel):
     """Payload required to pause the protocol."""
 
-    message: Optional[str] = Field(
+    message: str | SkipJsonSchema[None] = Field(
         None,
         description="A user-facing message associated with the pause",
+        json_schema_extra=_remove_default,
     )
 
 
@@ -54,7 +61,7 @@ class WaitForResume(
 
     commandType: WaitForResumeCommandType = "waitForResume"
     params: WaitForResumeParams
-    result: Optional[WaitForResumeResult]
+    result: Optional[WaitForResumeResult] = None
 
     _ImplementationCls: Type[WaitForResumeImplementation] = WaitForResumeImplementation
 

opentrons/protocol_engine/errors/__init__.py

@@ -11,6 +11,7 @@ from .exceptions import (
     PickUpTipTipNotAttachedError,
     TipAttachedError,
     CommandDoesNotExistError,
+    UnsupportedLabwareForActionError,
     LabwareNotLoadedError,
     LabwareNotLoadedOnModuleError,
     LabwareNotLoadedOnLabwareError,
@@ -18,12 +19,14 @@ from .exceptions import (
     LiquidDoesNotExistError,
     LabwareDefinitionDoesNotExistError,
     LabwareCannotBeStackedError,
+    LabwareCannotSitOnDeckError,
     LabwareIsInStackError,
     LabwareOffsetDoesNotExistError,
     LabwareIsNotTipRackError,
     LabwareIsTipRackError,
     LabwareIsAdapterError,
     TouchTipDisabledError,
+    TouchTipIncompatibleArgumentsError,
     WellDoesNotExistError,
     PipetteNotLoadedError,
     ModuleNotLoadedError,
@@ -78,6 +81,9 @@ from .exceptions import (
     OperationLocationNotInWellError,
     InvalidDispenseVolumeError,
     StorageLimitReachedError,
+    InvalidLiquidError,
+    LiquidClassDoesNotExistError,
+    LiquidClassRedefinitionError,
 )
 
 from .error_occurrence import ErrorOccurrence, ProtocolCommandFailedError
@@ -99,14 +105,17 @@ __all__ = [
     "LabwareNotLoadedOnLabwareError",
     "LabwareNotOnDeckError",
     "LiquidDoesNotExistError",
+    "UnsupportedLabwareForActionError",
     "LabwareDefinitionDoesNotExistError",
     "LabwareCannotBeStackedError",
+    "LabwareCannotSitOnDeckError",
     "LabwareIsInStackError",
     "LabwareOffsetDoesNotExistError",
     "LabwareIsNotTipRackError",
     "LabwareIsTipRackError",
     "LabwareIsAdapterError",
     "TouchTipDisabledError",
+    "TouchTipIncompatibleArgumentsError",
     "WellDoesNotExistError",
     "PipetteNotLoadedError",
     "ModuleNotLoadedError",
@@ -138,6 +147,7 @@ __all__ = [
     "InvalidTargetSpeedError",
     "InvalidBlockVolumeError",
     "InvalidHoldTimeError",
+    "InvalidLiquidError",
     "InvalidWavelengthError",
     "CannotPerformModuleAction",
     "ResumeFromRecoveryNotAllowedError",
@@ -164,4 +174,6 @@ __all__ = [
     "OperationLocationNotInWellError",
     "InvalidDispenseVolumeError",
     "StorageLimitReachedError",
+    "LiquidClassDoesNotExistError",
+    "LiquidClassRedefinitionError",
 ]