mindspore 2.4.10__cp311-cp311-win_amd64.whl → 2.6.0rc1__cp311-cp311-win_amd64.whl

mindspore/mint/nn/layer/conv.py

@@ -0,0 +1,921 @@
+# Copyright 2024 Huawei Technologies Co., Ltd
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============================================================================
+"""conv"""
+from __future__ import absolute_import
+
+import math
+
+from mindspore.ops.auto_generate.gen_ops_prim import (conv1d_ext_op, conv1d_padding_op, conv2d_ext_op,
+                                                      conv2d_padding_op, conv3d_ext_op, conv3d_padding_op)
+from mindspore.ops.function.nn_func import pad_ext, conv_transpose2d
+from mindspore.ops.function.array_func import rank
+import mindspore.common.dtype as mstype
+from mindspore.common.parameter import Parameter
+from mindspore.common.initializer import initializer, HeUniform, Uniform, _calculate_fan_in_and_fan_out
+from mindspore import _checkparam as Validator
+from mindspore._checkparam import once, twice, triple
+from mindspore._extends import cell_attr_register
+from mindspore.nn.cell import Cell
+from mindspore.ops.functional import isconstant
+
+__all__ = ['Conv2d', 'ConvTranspose2d', 'Conv3d', 'Conv1d']
+
+
+class _Conv(Cell):
+    """
+    Applies a N-D convolution over an input signal composed of several input planes.
+    """
+    def __init__(self,
+                 in_channels,
+                 out_channels,
+                 kernel_size,
+                 stride,
+                 padding,
+                 dilation,
+                 transposed,
+                 output_padding,
+                 groups,
+                 bias,
+                 padding_mode,
+                 dtype=mstype.float32):
+        """Initialize _Conv."""
+        super(_Conv, self).__init__()
+        if groups <= 0:
+            raise ValueError('groups must be a positive integer.')
+        self.in_channels = in_channels
+        if self.in_channels % groups != 0:
+            raise ValueError('in_channels must be divisible by groups.')
+        self.out_channels = out_channels
+        if self.out_channels % groups != 0:
+            raise ValueError('out_channels must be divisible by groups.')
+        valid_padding_strings = {'same', 'valid'}
+        self.padding = padding
+        self.stride = stride
+        if isinstance(self.padding, str):
+            if self.padding not in valid_padding_strings:
+                raise ValueError(f"The value of 'padding' must be one of '{valid_padding_strings}', "
+                                 f"but got {self.padding}.")
+            if self.padding == 'same' and any(s != 1 for s in self.stride):
+                raise ValueError("padding='same' is not supported for strided convolutions")
+
+        valid_padding_modes = {'zeros', 'reflect', 'replicate', 'circular'}
+        if padding_mode not in valid_padding_modes:
+            raise ValueError(f"The value of 'padding_mode' must be one of '{valid_padding_modes}', "
+                             f"but got {padding_mode}.")
+        self.transposed = transposed
+        self.groups = Validator.check_positive_int(groups)
+        self.output_padding = output_padding
+        self.padding_mode = padding_mode
+        self.kernel_size = kernel_size
+        for kernel_size_elem in kernel_size:
+            Validator.check_positive_int(kernel_size_elem, 'kernel_size item', self.cls_name)
+        for stride_elem in stride:
+            Validator.check_positive_int(stride_elem, 'stride item', self.cls_name)
+        self.dilation = dilation
+        for dilation_elem in dilation:
+            Validator.check_positive_int(dilation_elem, 'dilation item', self.cls_name)
+        if isinstance(self.padding, str):
+            self._reversed_padding = [0, 0] * len(kernel_size)
+            if padding == 'same':
+                for d, k, i in zip(dilation, kernel_size,
+                                   range(len(kernel_size) - 1, -1, -1)):
+                    total_padding = d * (k - 1)
+                    left_pad = total_padding // 2
+                    self._reversed_padding[2 * i] = left_pad
+                    self._reversed_padding[2 * i + 1] = (
+                        total_padding - left_pad)
+        else:
+            self._reversed_padding = tuple(x for x in reversed(self.padding) for _ in range(2))
+        if transposed:
+            shape = [in_channels, out_channels // groups, *kernel_size]
+        else:
+            shape = [out_channels, in_channels // groups, *kernel_size]
+        weight_init = HeUniform(math.sqrt(5))
+        self.weight = Parameter(initializer(weight_init, shape, dtype=dtype), name='weight')
+
+        if Validator.check_bool(bias, "bias", self.cls_name):
+            fan_in, _ = _calculate_fan_in_and_fan_out(shape)
+            if fan_in != 0:
+                bound = 1 / math.sqrt(fan_in)
+                bias_init = Uniform(bound)
+            else:
+                bias_init = 'zeros'
+            self.bias = Parameter(initializer(bias_init, [out_channels], dtype=dtype), name='bias')
+        else:
+            self.bias = None
+
+    def construct(self, *inputs):
+        """Must be overridden by all subclasses."""
+        raise NotImplementedError
+
+    def extend_repr(self):
+        bias = self.bias is not None
+        s = 'input_channels={}, output_channels={}, kernel_size={}, ' \
+            'stride={}, padding={}, dilation={}, ' \
+            'groups={}, bias={}'.format(
+                self.in_channels,
+                self.out_channels,
+                self.kernel_size,
+                self.stride,
+                self.padding,
+                self.dilation,
+                self.groups,
+                bias)
+        return s
+
+
+class Conv1d(_Conv):
+    r"""
+    1D convolution layer.
+
+    Applies a 1D convolution over an input tensor which is typically of shape :math:`(N, C_{in}, L_{in})`,
+    where :math:`N` is batch size, :math:`C` is channel number, :math:`L` is sequence length.
+
+    The output is calculated based on formula:
+
+    .. math::
+
+        \text{out}(N_i, C_{\text{out}_j}) = \text{bias}(C_{\text{out}_j}) +
+        \sum_{k = 0}^{C_{in} - 1} \text{ccor}({\text{weight}(C_{\text{out}_j}, k), \text{X}(N_i, k)})
+
+
+    where :math:`bias` is the output channel bias, :math:`ccor` is
+    the `cross-correlation <https://en.wikipedia.org/wiki/Cross-correlation>`_,
+    :math:`weight` is the convolution kernel value and :math:`X` represents the input feature map.
+
+    - :math:`i` corresponds to the batch number, the range is :math:`[0, N-1]`,
+      where :math:`N` is the batch size of the input.
+
+    - :math:`j` corresponds to the output channel, the range is :math:`[0, C_{out}-1]`,
+      where :math:`C_{out}` is the number of
+      output channels, which is also equal to the number of kernels.
+
+    - :math:`k` corresponds to the input channel, the range is :math:`[0, C_{in}-1]`,
+      where :math:`C_{in}` is the number of
+      input channels, which is also equal to the number of channels in the convolutional kernels.
+
+    Therefore, in the above formula, :math:`{bias}(C_{\text{out}_j})` represents the bias of the :math:`j`-th
+    output channel, :math:`{weight}(C_{\text{out}_j}, k)` represents the slice of the :math:`j`-th convolutional
+    kernel in the :math:`k`-th channel, and :math:`{X}(N_i, k)` represents the slice of the :math:`k`-th input
+    channel in the :math:`i`-th batch of the input feature map.
+
+    The shape of the convolutional kernel is given by :math:`(\text{kernel_size})`,
+    where :math:`\text{kernel_size}` is the length of the kernel.
+    If we consider the input and output channels as well as the `groups` parameter, the complete kernel shape
+    will be :math:`(C_{out}, C_{in} / \text{groups}, \text{kernel_size})`,
+    where `groups` is the number of groups dividing `x`'s input channel when applying groups convolution.
+
+    For more details about convolution layer, please refer to `Gradient Based Learning Applied to Document Recognition
+    <http://vision.stanford.edu/cs598_spring07/papers/Lecun98.pdf>`_.
+
+    Args:
+        in_channels (int): The channel number of the input tensor of the Conv1d layer.
+        out_channels (int): The channel number of the output tensor of the Conv1d layer.
+        kernel_size (Union[int, tuple[int], list[int]]): Specifies the length of the 1D convolution kernel.
+            The data type is an integer or a tuple of one integer.
+        stride (Union[int, tuple[int], list[int]], optional): The movement stride of the 1D convolution kernel.
+            The data type is an integer or a tuple of one integer. Default: ``1`` .
+        padding (Union[int, tuple[int], list[int], str], optional): The number of padding
+            on the input.
+            The data type is an integer or a tuple of one integer or string {``"valid"``, ``"same"``}.
+            The value should be greater than or equal to 0. Default: ``0`` .
+
+            - ``"same"``: Pad the input around its edges so that the shape of input and output
+              are the same when `stride` is set to ``1``.
+              The amount of padding to is calculated by the operator internally, If the amount is even, it is
+              uniformly distributed around the input, if it is odd, the excess amount goes to the right side.
+              If this mode is set, `stride` must be 1.
+
+            - ``"valid"``: No padding is applied to the input, and the output returns the maximum
+              possible length. Extra sequence that could not complete a full stride will
+              be discarded.
+
+        padding_mode (str, optional): Specifies the padding mode with a padding value of 0. It can be set to:
+            ``"zeros"`` , ``"reflect"`` ``"circular"`` or ``"replicate"`` . Default: ``"zeros"`` .
+        dilation (Union[int, tuple[int], list[int]], optional): Specifies the dilation rate to use for dilated convolution.
+            It can be a single int or a tuple of 1 integer. 
+            Assuming :math:`dilation=(d)`, the convolutional kernel samples the input with a
+            spacing of :math:`d-1` elements in the length direction.
+            Default: ``1`` .
+        groups (int, optional): Splits filter into groups, `in_channels` and `out_channels` must be
+            divisible by `groups`. If the groups is equal to `in_channels` and `out_channels`,
+            this 1D convolution layer also can be called 1D depthwise convolution layer. Default: ``1`` .
+            The following restraints must be met:
+
+              - :math:`(C_{in} \text{ % } \text{groups} == 0)`
+              - :math:`(C_{out} \text{ % } \text{groups} == 0)`
+              - :math:`(C_{out} >= \text{groups})`
+              - :math:`(\text{kernel_size[1]} = C_{in} / \text{groups})`
+
+        bias (bool, optional): Whether the Conv1d layer has a bias parameter. Default: ``True`` .
+        dtype (:class:`mindspore.dtype`, optional): Dtype of Parameters. Default: ``None``, using ``mstype.float32``.
+
+    Inputs:
+        - **x** (Tensor) - Tensor of shape :math:`(N, C_{in}, L_{in})` \
+          or :math:`(C_{in}, L_{in})`.
+
+    Outputs:
+        Tensor of shape :math:`(N, C_{out}, L_{out})` or :math:`(C_{out}, L_{out})`.
+
+        padding is ``'same'``:
+
+        .. math::
+            \begin{array}{ll} \\
+                L_{out} = \left \lceil{\frac{L_{in}}{\text{stride}}} \right \rceil \\
+            \end{array}
+
+        padding is ``'valid'``:
+
+        .. math::
+            \begin{array}{ll} \\
+                L_{out} = \left \lceil{\frac{L_{in} - \text{dilation} \times (\text{kernel_size} - 1) }
+                {\text{stride}}} \right \rceil \\
+            \end{array}
+
+        padding is int or tuple/list:
+
+        .. math::
+            \begin{array}{ll} \\
+                L_{out} = \left \lfloor{\frac{L_{in} + 2 \times {padding} - (\text{kernel_size} - 1) \times
+                \text{dilation} - 1 }{\text{stride}} + 1} \right \rfloor \\
+            \end{array}
+
+    Raises:
+        ValueError: Args and size of the input feature map should satisfy the output formula to ensure that the size of
+            the output feature map is positive; otherwise, an error will be reported.
+        RuntimeError: On Ascend, due to the limitation of the L1 cache size of different NPU chip, if input size or
+            kernel size is too large, it may trigger an error.
+        TypeError: If `in_channels`, `out_channels` or `groups` is not an int.
+        TypeError: If `kernel_size`, `stride` or `dilation` is neither an int nor a tuple.
+        ValueError: If `in_channels`, `out_channels`, `kernel_size`, `stride` or `dilation` is less than 1.
+        ValueError: If `padding` is less than 0.
+        ValueError: If `padding` is `same` , `stride` is not equal to 1.
+        ValueError: The input parameters do not satisfy the convolution output formula.
+        ValueError: The `kernel_size` cannot exceed the size of the input feature map.
+        ValueError: The value of padding cannot cause the calculation area to exceed the input size.
+
+    Supported Platforms:
+        ``Ascend``
+
+    Examples:
+        >>> import mindspore
+        >>> from mindspore import Tensor, mint
+        >>> import numpy as np
+        >>> net = mint.nn.Conv1d(120, 240, 4, bias=False)
+        >>> x = Tensor(np.ones([1, 120, 1024]), mindspore.float32)
+        >>> output = net(x).shape
+        >>> print(output)
+        (1, 240, 1021)
+    """
+    @cell_attr_register
+    def __init__(self,
+                 in_channels,
+                 out_channels,
+                 kernel_size,
+                 stride=1,
+                 padding=0,
+                 dilation=1,
+                 groups=1,
+                 bias=True,
+                 padding_mode='zeros',
+                 dtype=None):
+        """Initialize Conv1d."""
+        kernel_size_ = once(kernel_size)
+        stride_ = once(stride)
+        padding_ = padding if isinstance(padding, str) else once(padding)
+        dilation_ = once(dilation)
+        if not dtype:
+            dtype = mstype.float32
+        super(Conv1d, self).__init__(in_channels, out_channels, kernel_size_, stride_, padding_, dilation_, False,
+                                     once(0), groups, bias, padding_mode, dtype)
+        if isinstance(padding, str) and padding_mode == "zeros":
+            self.conv1d = conv1d_padding_op
+        else:
+            self.conv1d = conv1d_ext_op
+
+
+    def construct(self, input):
+        if self.padding_mode != "zeros":
+            output = self.conv1d(pad_ext(input, self._reversed_padding, mode=self.padding_mode), self.weight,
+                                 self.bias, self.stride, (0,), self.dilation, self.groups)
+        else:
+            output = self.conv1d(input, self.weight, self.bias, self.stride, self.padding, self.dilation, self.groups)
+        return output
+
+
+class Conv2d(_Conv):
+    r"""
+    2D convolution layer.
+
+    Applies a 2D convolution over an input tensor which is typically of shape :math:`(N, C_{in}, H_{in}, W_{in})`,
+    where :math:`N` is batch size, :math:`C` is channel number, :math:`H` is feature height, :math:`W` is feature width.
+
+    The output is calculated based on formula:
+
+    .. math::
+
+        \text{out}(N_i, C_{\text{out}_j}) = \text{bias}(C_{\text{out}_j}) +
+        \sum_{k = 0}^{C_{in} - 1} \text{ccor}({\text{weight}(C_{\text{out}_j}, k), \text{X}(N_i, k)})
+
+    where :math:`bias` is the output channel bias, :math:`ccor` is
+    the `cross-correlation <https://en.wikipedia.org/wiki/Cross-correlation>`_,
+    :math:`weight` is the convolution kernel value and :math:`X` represents the input feature map.
+
+    - :math:`i` corresponds to the batch number, the range is :math:`[0, N-1]`,
+      where :math:`N` is the batch size of the input.
+
+    - :math:`j` corresponds to the output channel, the range is :math:`[0, C_{out}-1]`,
+      where :math:`C_{out}` is the number of
+      output channels, which is also equal to the number of kernels.
+
+    - :math:`k` corresponds to the input channel, the range is :math:`[0, C_{in}-1]`,
+      where :math:`C_{in}` is the number of
+      input channels, which is also equal to the number of channels in the convolutional kernels.
+
+    Therefore, in the above formula, :math:`{bias}(C_{\text{out}_j})` represents the bias of the :math:`j`-th
+    output channel, :math:`{weight}(C_{\text{out}_j}, k)` represents the slice of the :math:`j`-th convolutional
+    kernel in the :math:`k`-th channel, and :math:`{X}(N_i, k)` represents the slice of the :math:`k`-th input
+    channel in the :math:`i`-th batch of the input feature map.
+
+    The shape of the convolutional kernel is given by :math:`(\text{kernel_size[0]},\text{kernel_size[1]})`,
+    where :math:`\text{kernel_size[0]}`
+    and :math:`\text{kernel_size[1]}` are the height and width of the kernel, respectively.
+    If we consider the input and output channels as well as the `groups` parameter, the complete kernel shape
+    will be :math:`(C_{out}, C_{in} / \text{groups}, \text{kernel_size[0]}, \text{kernel_size[1]})`,
+    where `groups` is the number of groups dividing `x`'s input channel when applying groups convolution.
+
+    For more details about convolution layer, please refer to `Gradient Based Learning Applied to Document Recognition
+    <http://vision.stanford.edu/cs598_spring07/papers/Lecun98.pdf>`_.
+
+    Args:
+        in_channels (int): The channel number of the input tensor of the Conv2d layer.
+        out_channels (int): The channel number of the output tensor of the Conv2d layer.
+        kernel_size (Union[int, tuple[int], list[int]]): Specifies the height and width of the 2D convolution kernel.
+            The data type is an integer or a tuple of two integers. An integer represents the height
+            and width of the convolution kernel. A tuple of two integers represents the height
+            and width of the convolution kernel respectively.
+        stride (Union[int, tuple[int], list[int]], optional): The movement stride of the 2D convolution kernel.
+            The data type is an integer or a tuple of two integers. An integer represents the movement step size
+            in both height and width directions. A tuple of two integers represents the movement step size in the height
+            and width directions respectively. Default: ``1`` .
+        padding (Union[int, tuple[int], list[int], str], optional): The number of padding
+            on the height and width directions of the input.
+            The data type is an integer or a tuple of two integers or string {``"valid"``, ``"same"``}.
+            If `padding` is an integer, then `padding_{H}` and `padding_{W}` are all equal to `padding`.
+            If `padding` is a tuple of 2 integers, then `padding_{H}` and `padding_{W}`
+            is equal to `padding[0]` and `padding[1]` respectively.
+            The value should be greater than or equal to 0. Default: ``0`` .
+
+            - ``"same"``: Pad the input around its edges so that the shape of input and output
+              are the same when `stride` is set to ``1``.
+              The amount of padding to is calculated by the operator internally, If the amount is even, it is
+              uniformly distributed around the input, if it is odd, the excess amount goes to the right/bottom side.
+              If this mode is set, `stride` must be 1.
+
+            - ``"valid"``: No padding is applied to the input, and the output returns the maximum
+              possible height and width. Extra pixels that could not complete a full stride will
+              be discarded.
+
+        padding_mode (str, optional): Specifies the padding mode with a padding value of 0. It can be set to:
+            ``"zeros"`` , ``"reflect"`` ``"circular"`` or ``"replicate"`` . Default: ``"zeros"`` .
+        dilation (Union[int, tuple[int], list[int]], optional): Specifies the dilation rate to use for dilated convolution.
+            It can be a single int or a tuple of 2 or 4 integers. A single int means the dilation size is the same
+            in both the height and width directions. A tuple of two ints represents the dilation size in
+            the height and width directions, respectively. For a tuple of four ints, the two ints correspond
+            to (N, C) dimension are treated as 1, and the two correspond to (H, W) dimensions is the
+            dilation size in the height and width directions respectively.
+            Assuming :math:`dilation=(d0, d1)`, the convolutional kernel samples the input with a
+            spacing of :math:`d0-1` elements in the height direction and :math:`d1-1` elements in the width direction.
+            The values in the height and width dimensions are in the ranges [1, H] and [1, W], respectively.
+            Default: ``1`` .
+        groups (int, optional): Splits filter into groups, `in_channels` and `out_channels` must be
+            divisible by `groups`. If the groups is equal to `in_channels` and `out_channels`,
+            this 2D convolution layer also can be called 2D depthwise convolution layer. Default: ``1`` .
+            The following restraints must be met:
+
+            - :math:`(C_{in} \text{ % } \text{groups} == 0)`
+            - :math:`(C_{out} \text{ % } \text{groups} == 0)`
+            - :math:`(C_{out} >= \text{groups})`
+            - :math:`(\text{kernel_size[1]} = C_{in} / \text{groups})`
+
+        bias (bool, optional): Whether the Conv2d layer has a bias parameter. Default: ``True`` .
+        dtype (:class:`mindspore.dtype`, optional): Dtype of Parameters. Default: ``None``, using ``mstype.float32``.
+
+    Inputs:
+        - **x** (Tensor) - Tensor of shape :math:`(N, C_{in}, H_{in}, W_{in})` \
+          or :math:`(C_{in}, H_{in}, W_{in})`.
+
+    Outputs:
+        Tensor of shape :math:`(N, C_{out}, H_{out}, W_{out})` or :math:`(C_{out}, H_{out}, W_{out})`.
+
+        padding is ``'same'``:
+
+        .. math::
+            \begin{array}{ll} \\
+                H_{out} = \left \lceil{\frac{H_{in}}{\text{stride[0]}}} \right \rceil \\
+                W_{out} = \left \lceil{\frac{W_{in}}{\text{stride[1]}}} \right \rceil \\
+            \end{array}
+
+        padding is ``'valid'``:
+
+        .. math::
+            \begin{array}{ll} \\
+                H_{out} = \left \lceil{\frac{H_{in} - \text{dilation[0]} \times (\text{kernel_size[0]} - 1) }
+                {\text{stride[0]}}} \right \rceil \\
+                W_{out} = \left \lceil{\frac{W_{in} - \text{dilation[1]} \times (\text{kernel_size[1]} - 1) }
+                {\text{stride[1]}}} \right \rceil \\
+            \end{array}
+
+        padding is int or tuple/list:
+
+        .. math::
+            \begin{array}{ll} \\
+                H_{out} = \left \lfloor{\frac{H_{in} + padding[0] + padding[1] - (\text{kernel_size[0]} - 1) \times
+                \text{dilation[0]} - 1 }{\text{stride[0]}} + 1} \right \rfloor \\
+                W_{out} = \left \lfloor{\frac{W_{in} + padding[2] + padding[3] - (\text{kernel_size[1]} - 1) \times
+                \text{dilation[1]} - 1 }{\text{stride[1]}} + 1} \right \rfloor \\
+            \end{array}
+
+    Raises:
+        ValueError: Args and size of the input feature map should satisfy the output formula to ensure that the size of
+            the output feature map is positive; otherwise, an error will be reported.
+        RuntimeError: On Ascend, due to the limitation of the L1 cache size of different NPU chip, if input size or
+            kernel size is too large, it may trigger an error.
+        TypeError: If `in_channels`, `out_channels` or `groups` is not an int.
+        TypeError: If `kernel_size`, `stride` or `dilation` is neither an int nor a tuple.
+        ValueError: If `in_channels`, `out_channels`, `kernel_size`, `stride` or `dilation` is less than 1.
+        ValueError: If `padding` is less than 0.
+        ValueError: If `padding` is `same` , `stride` is not equal to 1.
+        ValueError: The input parameters do not satisfy the convolution output formula.
+        ValueError: The `kernel_size` cannot exceed the size of the input feature map.
+        ValueError: The value of padding cannot cause the calculation area to exceed the input size.
+
+    Supported Platforms:
+        ``Ascend``
+
+    Examples:
+        >>> import mindspore
+        >>> from mindspore import Tensor, mint
+        >>> import numpy as np
+        >>> net = mint.nn.Conv2d(120, 240, 4, bias=False)
+        >>> x = Tensor(np.ones([1, 120, 1024, 640]), mindspore.float32)
+        >>> output = net(x).shape
+        >>> print(output)
+        (1, 240, 1021, 637)
+    """
+    @cell_attr_register
+    def __init__(self,
+                 in_channels,
+                 out_channels,
+                 kernel_size,
+                 stride=1,
+                 padding=0,
+                 dilation=1,
+                 groups=1,
+                 bias=True,
+                 padding_mode='zeros',
+                 dtype=None):
+        """Initialize Conv2d."""
+        kernel_size_ = twice(kernel_size)
+        stride_ = twice(stride)
+        padding_ = padding if isinstance(padding, str) else twice(padding)
+        dilation_ = twice(dilation)
+        if not dtype:
+            dtype = mstype.float32
+        super(Conv2d, self).__init__(in_channels, out_channels, kernel_size_, stride_, padding_, dilation_, False,
+                                     twice(0), groups, bias, padding_mode, dtype)
+        if isinstance(padding, str) and padding_mode == "zeros":
+            self.conv2d = conv2d_padding_op
+        else:
+            self.conv2d = conv2d_ext_op
+
+
+    def construct(self, input):
+        if self.padding_mode != "zeros":
+            output = self.conv2d(pad_ext(input, self._reversed_padding, mode=self.padding_mode), self.weight,
+                                 self.bias, self.stride, (0, 0), self.dilation, self.groups)
+        else:
+            output = self.conv2d(input, self.weight, self.bias, self.stride, self.padding, self.dilation, self.groups)
+        return output
+
+
+class Conv3d(_Conv):
+    r"""
+    3D convolution layer.
+
+    Applies a 3D convolution over an input tensor. The input tensor is typically of
+    shape :math:`(N, C_{in}, D_{in}, H_{in}, W_{in})`, where :math:`N` is batch size, :math:`C`
+    is channel number, :math:`D, H, W` are the depth, height and width of the feature graph, respectively.
+
+    The output is calculated based on formula:
+
+    .. math::
+
+        \text{out}(N_i, C_{\text{out}_j}) = \text{bias}(C_{\text{out}_j}) +
+        \sum_{k = 0}^{C_{in} - 1} \text{ccor}({\text{weight}(C_{\text{out}_j}, k), \text{X}(N_i, k)})
+
+    where :math:`bias` is the output channel bias, :math:`ccor` is
+    the `cross-correlation <https://en.wikipedia.org/wiki/Cross-correlation>`_,
+    :math:`weight` is the convolution kernel value and :math:`X` represents the input feature map.
+
+    Here are the indices' meanings:
+
+    - :math:`i` corresponds to the batch number, the range is :math:`[0, N-1]`,
+      where :math:`N` is the batch size of the input.
+
+    - :math:`j` corresponds to the output channel, the range is :math:`[0, C_{out}-1]`,
+      where :math:`C_{out}` is the number of
+      output channels, which is also equal to the number of kernels.
+
+    - :math:`k` corresponds to the input channel, the range is :math:`[0, C_{in}-1]`,
+      where :math:`C_{in}` is the number of
+      input channels, which is also equal to the number of channels in the convolutional kernels.
+
+    Therefore, in the above formula, :math:`{bias}(C_{\text{out}_j})` represents the bias of the :math:`j`-th
+    output channel, :math:`{weight}(C_{\text{out}_j}, k)` represents the slice of the :math:`j`-th convolutional
+    kernel in the :math:`k`-th channel, and :math:`{X}(N_i, k)` represents the slice of the :math:`k`-th input
+    channel in the :math:`i`-th batch of the input feature map.
+
+    The shape of the convolutional kernel is given by
+    :math:`(\text{kernel_size[0]},\text{kernel_size[1]},\text{kernel_size[2]})`,
+    where :math:`\text{kernel_size[0]}`, :math:`\text{kernel_size[1]}`
+    and :math:`\text{kernel_size[2]}` are the depth, height and width of the kernel, respectively.
+    If we consider the input and output channels as well as the `groups` parameter, the complete kernel shape
+    will be
+    :math:`(C_{out}, C_{in} / \text{groups}, \text{kernel_size[0]}, \text{kernel_size[1]}, \text{kernel_size[2]})`,
+    where `groups` is the number of groups dividing `x`'s input channel when applying groups convolution.
+
+    For more details about convolution layer, please refer to `Gradient Based Learning Applied to Document Recognition
+    <http://vision.stanford.edu/cs598_spring07/papers/Lecun98.pdf>`_.
+
+    For the detail of limitations of the parameters, please refer to :func:`mindspore.mint.nn.functional.conv3d`.
+
+    .. warning::
+        This is an experimental API that is subject to change or deletion.
+
+    Args:
+        in_channels (int): The channel number of the input tensor of the Conv3d layer.
+        out_channels (int): The channel number of the output tensor of the Conv3d layer.
+        kernel_size (Union[int, tuple[int], list[int]]): Specifies the height and width of the 3D convolution kernel.
+            The data type is an integer or a tuple of two integers. An integer represents the height
+            and width of the convolution kernel. A tuple of two integers represents the height
+            and width of the convolution kernel respectively.
+        stride (Union[int, tuple[int], list[int]], optional): The movement stride of the 3D convolution kernel.
+            The data type is an integer or a tuple of three integers. An integer represents the movement step size
+            in both height and width directions. A tuple of three integers represents the movement step size in the
+            depth, height and width directions respectively. Default: ``1`` .
+        padding (Union[int, tuple[int], list[int], str], optional): The number of padding
+            on the depth, height and width directions of the input.
+            The data type is an integer or string {``"valid"``, ``"same"``} or a tuple of three integers.
+            The value should be greater than or equal to 0. Default: ``0`` .
+
+            - ``"same"``: Pad the input around its edges so that the shape of input and output
+              are the same when `stride` is set to ``1``.
+              The amount of padding to is calculated by the operator internally, If the amount is even, it is
+              uniformly distributed around the input, if it is odd, the excess amount goes to the right/bottom side.
+              If this mode is set, `padding` must be 0.
+
+            - ``"valid"``: No padding is applied to the input, and the output returns the maximum
+              possible height and width. Extra pixels that could not complete a full stride will
+              be discarded. If this mode is set, `padding` must be 0.
+
+        padding_mode (str, optional): Specifies the padding mode with a padding value of 0. It can be set to:
+            ``"zeros"`` , ``"reflect"`` ``"circular"`` or ``"replicate"`` . Default: ``"zeros"`` .
+        dilation (Union[int, tuple[int], list[int]], optional): Controlling the space between the kernel points.
+            Default: ``1`` .
+        groups (int, optional): Splits filter into groups, `in_channels` and `out_channels` must be
+            divisible by `groups`. If the groups is equal to `in_channels` and `out_channels`. Default: ``1`` .
+        bias (bool, optional): Whether the Conv3d layer has a bias parameter. Default: ``True`` .
+        dtype (:class:`mindspore.dtype`, optional): Dtype of Parameters. Default: ``None``, using ``mstype.float32``.
+
+    Inputs:
+        - **x** (Tensor) - Tensor of shape :math:`(N, C_{in}, D_{in}, H_{in}, W_{in})` \
+          or :math:`(C_{in}, D_{in}, H_{in}, W_{in})`.
+
+    Outputs:
+        Tensor of shape :math:`(N, C_{out}, D_{out}, H_{out}, W_{out})`
+        or :math:`(C_{out}, D_{out}, H_{out}, W_{out})`.
+
+        padding is ``"same"``:
+
+        .. math::
+            \begin{array}{ll} \\
+                D_{out} = \left \lceil{\frac{D_{in}}{\text{stride[0]}}} \right \rceil \\
+                H_{out} = \left \lceil{\frac{H_{in}}{\text{stride[1]}}} \right \rceil \\
+                W_{out} = \left \lceil{\frac{W_{in}}{\text{stride[2]}}} \right \rceil \\
+            \end{array}
+
+        padding is ``"valid"``:
+
+        .. math::
+            \begin{array}{ll} \\
+                D_{out} = \left \lceil{\frac{D_{in} - \text{dilation[0]} \times (\text{kernel_size[0]} - 1) }
+                {\text{stride[0]}}} \right \rceil \\
+                H_{out} = \left \lceil{\frac{H_{in} - \text{dilation[1]} \times (\text{kernel_size[1]} - 1) }
+                {\text{stride[1]}}} \right \rceil \\
+                W_{out} = \left \lceil{\frac{W_{in} - \text{dilation[2]} \times (\text{kernel_size[2]} - 1) }
+                {\text{stride[2]}}} \right \rceil \\
+            \end{array}
+
+    Raises:
+        TypeError: If `in_channels`, `out_channels` or `groups` is not an int.
+        TypeError: If `kernel_size`, `stride`, `padding` or `dilation` is neither an int nor a tuple.
+        ValueError: If `in_channels`, `out_channels`, `kernel_size`, `stride` or `dilation` is less than 1.
+        ValueError: If `padding` is less than 0.
+
+    Supported Platforms:
+        ``Ascend``
+
+    Examples:
+        >>> import mindspore
+        >>> from mindspore import Tensor, mint
+        >>> import numpy as np
+        >>> net = mint.nn.Conv3d(120, 10, 4)
+        >>> x = Tensor(np.ones([1, 120, 10, 23, 34]), mindspore.float32)
+        >>> output = net(x).shape
+        >>> print(output)
+        (1, 10, 7, 20, 31)
+    """
+    @cell_attr_register
+    def __init__(self,
+                 in_channels,
+                 out_channels,
+                 kernel_size,
+                 stride=1,
+                 padding=0,
+                 dilation=1,
+                 groups=1,
+                 bias=True,
+                 padding_mode='zeros',
+                 dtype=None):
+        """Initialize Conv3d."""
+        kernel_size_ = triple(kernel_size)
+        stride_ = triple(stride)
+        padding_ = padding if isinstance(padding, str) else triple(padding)
+        dilation_ = triple(dilation)
+        if not dtype:
+            dtype = mstype.float32
+        super(Conv3d, self).__init__(in_channels, out_channels, kernel_size_, stride_, padding_, dilation_, False,
+                                     triple(0), groups, bias, padding_mode, dtype)
+        if isinstance(padding, str) and padding_mode == "zeros":
+            self.conv3d = conv3d_padding_op
+        else:
+            self.conv3d = conv3d_ext_op
+
+
+    def construct(self, input):
+        if self.padding_mode != "zeros":
+            output = self.conv3d(pad_ext(input, self._reversed_padding, mode=self.padding_mode), self.weight,
+                                 self.bias, self.stride, (0, 0, 0), self.dilation, self.groups)
+        else:
+            output = self.conv3d(input, self.weight, self.bias, self.stride, self.padding, self.dilation, self.groups)
+        return output
+
+
+def batchify(input, num_spatial_dims, ops_name):
+    """Conv input batchify"""
+    dim_count_no_batch = num_spatial_dims + 1
+    dim_count_batch = dim_count_no_batch + 1
+    is_batched = (input.ndim == dim_count_batch)
+    if not (input.ndim == dim_count_no_batch or is_batched):
+        raise TypeError(f"For {ops_name}, Expected {dim_count_no_batch}D (unbatched) or {dim_count_batch}D (batched)," \
+                        f"but got input of ndim: {input.ndim}D")
+    if is_batched:
+        return input, is_batched
+    return input.unsqueeze(0), is_batched
+
+
+class _ConvTranspose(_Conv):
+    """
+    Applies a N-D convolution over an input signal composed of several input planes.
+    """
+    def __init__(self, in_channels, out_channels, kernel_size, stride,
+                 padding, dilation, transposed, output_padding, groups,
+                 bias, padding_mode, dtype=None):
+        if padding_mode != "zeros":
+            raise ValueError(
+                f'Only "zeros" padding mode is supported for {self.__class__.__name__}'
+            )
+        super(_ConvTranspose, self).__init__(in_channels, out_channels, kernel_size,
+                                             stride, padding, dilation, transposed,
+                                             output_padding, groups, bias, padding_mode, dtype)
+
+    def _check_output_size(self, output_size, min_sizes, max_sizes, input_shape):
+        if isconstant(output_size) and isconstant(min_sizes)\
+            and isconstant(max_sizes) and isconstant(input_shape):
+            for i in range(len(output_size)):
+                size = output_size[i]
+                min_size = min_sizes[i]
+                max_size = max_sizes[i]
+                if size < min_size or size > max_size:
+                    raise ValueError(
+                        f"requested an output size of {output_size}, but valid sizes range "
+                        f"from {min_sizes} to {max_sizes} (for an input of {input_shape})"
+                    )
+
+    # dilation being an optional parameter is for backwards
+    # compatibility
+    def _output_padding(self, input, output_size, stride, padding, kernel_size,
+                        num_spatial_dims, dilation):
+        "the computation of output padding"
+        if output_size is None:
+            ret = tuple(self.output_padding)  # converting to list if was not already
+        else:
+            input_rank = rank(input)
+            has_batch_dim = input_rank == (num_spatial_dims + 2)
+            num_non_spatial_dims = 2 if has_batch_dim else 1
+            if isconstant(output_size) and isconstant(input_rank) and\
+                len(output_size) != num_spatial_dims and len(output_size) != (num_non_spatial_dims + num_spatial_dims):
+                raise ValueError(
+                    f"ConvTranspose{num_spatial_dims}D: for {input_rank}D input, ",
+                    f"output_size must have {num_spatial_dims} ",
+                    f"or {num_non_spatial_dims + num_spatial_dims} elements (got {len(output_size)})"
+                )
+            output_size = output_size[-num_spatial_dims:]
+
+            min_sizes = []
+            max_sizes = []
+            for d in range(num_spatial_dims):
+                dim_size = (
+                    (input.shape[d + num_non_spatial_dims] - 1) * stride[d]
+                    - 2 * padding[d]
+                    + (dilation[d] if dilation is not None else 1)
+                    * (kernel_size[d] - 1)
+                    + 1
+                )
+                min_sizes.append(dim_size)
+                max_sizes.append(min_sizes[d] + stride[d] - 1)
+            self._check_output_size(output_size, min_sizes, max_sizes, input.shape)
+
+            res = []
+            for d in range(num_spatial_dims):
+                res.append(output_size[d] - min_sizes[d])
+            ret = res
+        return ret
+
+    def construct(self, *inputs):
+        """Must be overridden by all subclasses."""
+        raise NotImplementedError
+
+
+def _pair(x, arg_name, class_name):
+    if isinstance(x, int):
+        return (x, x)
+    if isinstance(x, (tuple, list)):
+        if len(x) == 1:
+            return (x[0], x[-1])
+        return x
+    raise ValueError(f"For '{class_name}', '{arg_name}'",
+                     f" should be int, tuple or list, but got {x}")
+
+
+class ConvTranspose2d(_ConvTranspose):
+    r"""
+    Applies a 2D transposed convolution operator over an input image
+    composed of several input planes.
+
+    This module can be seen as the gradient of Conv2d with respect to its input.
+    It is also known as a fractionally-strided convolution or
+    a deconvolution (although it is not an actual deconvolution operation as it does
+    not compute a true inverse of convolution).
+
+    The parameters `kernel_size`, `stride`, `padding`, `output_padding` can either be:
+
+    - a single ``int`` -- in which case the same value is used for the height and width dimensions
+    - a ``tuple`` of two ints -- in which case, the first `int` is used for the height dimension,
+      and the second `int` for the width dimension
+
+    .. warning::
+        - This is an experimental API that is subject to change or deletion.
+        - In the scenario where inputs are non-contiguous, `output_padding` must be less than `stride` .
+        - For Atlas training products, when the dtype of input is float32, the `groups` only supports 1.
+
+    Args:
+        in_channels (int): Number of channels in the input image.
+        out_channels (int): Number of channels produced by the convolution.
+        kernel_size (Union[int, tuple(int)]): Size of the convolving kernel.
+        stride (Union[int, tuple(int)], optional): Stride of the convolution. Default: ``1`` .
+        padding (Union[int, tuple(int)], optional): :math:`dilation * (kernel\_size - 1) - padding` zero-padding
+            will be added to both sides of each dimension in the input. Default: ``0`` .
+        output_padding (Union[int, tuple(int)], optional): Additional size added to one side of each dimension
+            in the output shape. The value of `output_padding` must be less than `stride` or `dilation` .
+            Default: ``0`` .
+        groups (int, optional): Number of blocked connections from input channels to output channels. Default: ``1``
+        bias (bool, optional): If ``True``, adds a learnable bias to the output. Default: ``True`` .
+        dilation (Union[int, tuple(int)], optional): Spacing between kernel elements. Default: ``1`` .
+        padding_mode (str, optional): Specifies the padding mode with a padding value. For now, it can only be
+            set to: ``"zeros"``. Default: ``"zeros"`` .
+        dtype (mindspore.dtype, optional): Dtype of Parameters. Default: ``None`` , when it's ``None`` ,
+            the dtype of Parameters would be mstype.float32.
+
+    Variables:
+        - **weigh** (Parameter) - the learnable weights of the module of shape
+          :math:`(\text{in_channels}, \frac{\text{out_channels}}{\text{groups}},
+          \text{kernel_size[0]}, \text{kernel_size[1]})` . The values of these weights are sampled from
+          :math:`\mathcal{U}(-\sqrt{k}, \sqrt{k})` where
+          :math:`k = \frac{groups}{C_\text{out} * \prod_{i=0}^{1}\text{kernel_size}[i]}`
+        - **bias** (Parameter) - the learnable bias of the module of shape :math:`(\text{out_channels},)` .
+          If :attr:`bias` is ``True``, then the values of these weights are sampled from
+          :math:`\mathcal{U}(-\sqrt{k}, \sqrt{k})` where
+          :math:`k = \frac{groups}{C_\text{out} * \prod_{i=0}^{1}\text{kernel_size}[i]}` .
+
+    Inputs:
+        - **input** (Tensor) - Tensor of shape :math:`(N, C_{in}, H_{in}, W_{in})` or :math:`(C_{in}, H_{in}, W_{in})` .
+
+    Outputs:
+        Tensor of shape :math:`(N, C_{out}, H_{out}, W_{out})` or :math:`(C_{out}, H_{out}, W_{out})`, where
+
+        .. math::
+              H_{out} = (H_{in} - 1) \times \text{stride}[0] - 2 \times \text{padding}[0] + \text{dilation}[0]
+                        \times (\text{kernel_size}[0] - 1) + \text{output_padding}[0] + 1
+        .. math::
+              W_{out} = (W_{in} - 1) \times \text{stride}[1] - 2 \times \text{padding}[1] + \text{dilation}[1]
+                        \times (\text{kernel_size}[1] - 1) + \text{output_padding}[1] + 1
+
+    Supported Platforms:
+        ``Ascend``
+
+    Examples:
+        >>> import mindspore as ms
+        >>> from mindspore import mint
+        >>> # With square kernels and equal stride
+        >>> m = mint.nn.ConvTranspose2d(16, 33, 3, stride=2)
+        >>> # non-square kernels and unequal stride and with padding
+        >>> m = mint.nn.ConvTranspose2d(16, 33, (3, 5), stride=(2, 1), padding=(4, 2))
+        >>> input = mint.randn(20, 16, 50, 100)
+        >>> output = m(input)
+        >>> # exact output size can be also specified as an argument
+        >>> input = mint.randn(1, 16, 12, 12)
+        >>> downsample = mint.nn.Conv2d(16, 16, 3, stride=2, padding=1)
+        >>> upsample = mint.nn.ConvTranspose2d(16, 16, 3, stride=2, padding=1)
+        >>> h = downsample(input)
+        >>> h.shape
+        (1, 16, 6, 6)
+        >>> output = upsample(h, output_size=input.shape)
+        >>> output.shape
+        (1, 16, 12, 12)
+
+    .. _`here`:
+        https://github.com/vdumoulin/conv_arithmetic/blob/master/README.md
+
+    .. _`Deconvolutional Networks`:
+        https://www.matthewzeiler.com/mattzeiler/deconvolutionalnetworks.pdf
+    """
+
+    def __init__(self, in_channels, out_channels, kernel_size, stride=1, padding=0, output_padding=0,
+                 groups=1, bias=True, dilation=1, padding_mode="zeros", dtype=None):
+        dtype = mstype.float32 if dtype is None else dtype
+        kernel_size = _pair(kernel_size, "kernel_size", "ConvTranspose2d")
+        stride = _pair(stride, "kernel_size", "ConvTranspose2d")
+        padding = _pair(padding, "kernel_size", "ConvTranspose2d")
+        dilation = _pair(dilation, "kernel_size", "ConvTranspose2d")
+        output_padding = _pair(output_padding, "kernel_size", "ConvTranspose2d")
+        super(ConvTranspose2d, self).__init__(
+            in_channels,
+            out_channels,
+            kernel_size,
+            stride,
+            padding,
+            dilation,
+            True,
+            output_padding,
+            groups,
+            bias,
+            padding_mode,
+            dtype
+        )
+
+    def construct(self, input, output_size=None):
+        num_spatial_dims = 2
+        output_padding = self._output_padding(
+            input,
+            output_size,
+            self.stride,  # type: ignore[arg-type]
+            self.padding,  # type: ignore[arg-type]
+            self.kernel_size,  # type: ignore[arg-type]
+            num_spatial_dims,
+            self.dilation,  # type: ignore[arg-type]
+        )
+
+        return conv_transpose2d(
+            input,
+            self.weight,
+            self.bias,
+            self.stride,
+            self.padding,
+            output_padding,
+            self.groups,
+            self.dilation,
+        )