lalsuite 7.26.2.dev20251218__cp314-cp314t-manylinux_2_28_x86_64.whl

lalpulsar/simulateCW.py

@@ -0,0 +1,602 @@
+# Copyright (C) 2017 Karl Wette
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+## \defgroup lalpulsar_py_simulateCW SimulateCW
+## \ingroup lalpulsar_python
+r"""
+Generate strain time series of a continuous-wave signal in the detector frame,
+given a function which computes signal phase and amplitudes as functions of time.
+
+The given function should compute quantities \f$\Delta\phi(t)\f$, \f$a_+(t)\f$,
+and \f$a_\times(t)\f$ such that the plus and cross gravitational-wave
+polarisations \f$h_+(t)\f$ and \f$h_\times(t)\f$ are given by:
+\f{eqnarray}{
+h_+(t)      & = & a_+(t)     \cos[\phi_0 + \Delta\phi(t)] \; , \\
+h_\times(t) & = & a_\times(t)\sin[\phi_0 + \Delta\phi(t)] \; .
+\f}
+
+This module provides a class CWSimulator() to generate the strain time series.
+CWSimulator() can also directly write frame files and SFT files. Example usage:
+
+~~~
+import lal
+from lalpulsar import simulateCW
+
+def waveform(h0, cosi, freq, f1dot):
+    def wf(dt):
+        dphi = lal.TWOPI * (freq * dt + f1dot * 0.5 * dt**2)
+        ap = h0 * (1.0 + cosi**2) / 2.0
+        ax = h0 * cosi
+        return dphi, ap, ax
+    return wf
+
+tref     = 900043200
+tstart   = 900000000
+Tdata    = 86400
+h0       = 1e-24
+cosi     = 0.123
+psi      = 2.345
+phi0     = 3.210
+freq     = 10.0
+f1dot    = -1.35e-8
+dt_wf    = 5
+alpha    = 6.12
+delta    = 1.02
+detector = 'H1'
+
+wf = waveform(h0, cosi, freq, f1dot)
+S = simulateCW.CWSimulator(tref, tstart, Tdata, wf, dt_wf, phi0, psi, alpha, delta, detector)
+
+# To write SFT files
+for file, i, N in S.write_sft_files(fmax=32, Tsft=1800, comment="simCW"):
+    print('Generated SFT file %s (%i of %i)' % (file, i+1, N))
+
+# To write frame files
+for file, i, N in S.write_frame_files(fs=1, Tframe=1800, comment="simCW"):
+    print('Generated frame file %s (%i of %i)' % (file, i+1, N))
+
+~~~
+"""
+## @{
+
+from __future__ import division, print_function
+
+import os
+import sys
+import re
+import math
+
+import lal
+import lalpulsar
+
+from . import git_version
+
+__author__ = "Karl Wette <karl.wette@ligo.org>"
+__version__ = git_version.id
+__date__ = git_version.date
+
+
+class CWSimulator(object):
+    def __init__(
+        self,
+        tref,
+        tstart,
+        Tdata,
+        waveform,
+        dt_wf,
+        phi0,
+        psi,
+        alpha,
+        delta,
+        det_name,
+        earth_ephem_file="earth00-40-DE405.dat.gz",
+        sun_ephem_file="sun00-40-DE405.dat.gz",
+        tref_at_det=False,
+        extra_comment=None,
+    ):
+        """
+        Initialise a continuous-wave signal simulator.
+
+        @param tref: reference time of signal phase at Solar System barycentre, in GPS seconds
+            (but see @b tref_at_det)
+        @param tstart: start time of signal, in GPS seconds
+        @param Tdata: total duration of signal, in seconds
+        @param waveform: function which computes signal phase and amplitudes as functions of time:
+            @b dphi, @b aplus, @b across = @b waveform(dt), where:
+                @b dt = time since reference time @b tref;
+                @b dphi = phase of signal at time @b dt relative to reference time @b tref, in radians;
+                @b aplus = strain amplitude of plus polarisation at time @b dt;
+                @b across = strain amplitude of cross polarisation at time @b dt
+        @param dt_wf: sampling time of the function @c waveform; this need only be small enough to ensure
+            that @c dphi, @c aplus, and @c across are smoothly interpolated, and does not need to make
+            the desired sampling frequency of the output strain time series
+        @param phi0: initial phase of the gravitational-wave signal at @b tstart, in radians
+        @param psi: polarisation angle of the gravitational-wave source, in radians
+        @param alpha: right ascension of the gravitational-wave source, in radians
+        @param delta: declination  of the gravitational-wave source, in radians
+        @param det_name: name of the gravitational-wave detector to simulate a response for;
+            e.g. @c "H1" for LIGO Hanford, @c "L1" for LIGO Livingston, @c "V1" for Virgo
+        @param earth_ephem_file: name of file to load Earth ephemeris from
+        @param sun_ephem_file: name of file to load Sun ephemeris from
+        @param tref_at_det: default False; if True, shift reference time @b tref so that @b dt = 0 is
+            @b tref in @e detector frame instead of Solar System barycentre frame, useful if e.g. one
+            wants to turn on signal only for @b dt > 0, one can use @b tref as the turn-on time
+        @param extra_comment: additional text to add to comment string in frame/SFT headers
+               (not filenames), e.g. for wrapper script commandlines
+        """
+
+        self.__origin_str = "Generated by %s, %s-%s (%s)" % (
+            __file__,
+            git_version.id,
+            git_version.status,
+            git_version.date,
+        )
+        if extra_comment:
+            self.__origin_str += ", " + extra_comment
+
+        # store arguments
+        self.__tstart = tstart
+        self.__Tdata = Tdata
+
+        # parse detector name
+        try:
+            _, self.__site_index = lalpulsar.FindCWDetector(det_name, True)
+            assert self.__site_index >= 0
+        except:
+            raise ValueError("Invalid detector name det_name='%s'" % det_name)
+        self.__site = lal.CachedDetectors[self.__site_index]
+
+        # load Earth and Sun ephemerides
+        self.__ephemerides = lalpulsar.InitBarycenter(earth_ephem_file, sun_ephem_file)
+
+        if tref_at_det:
+            # calculate barycentric delay at reference time
+            bary_state = lalpulsar.EarthState()
+            bary_input = lalpulsar.BarycenterInput()
+            bary_emit = lalpulsar.EmissionTime()
+            bary_input.tgps = tref
+            bary_input.site = self.__site
+            for i in range(0, 3):
+                bary_input.site.location[i] /= lal.C_SI
+            bary_input.alpha = alpha
+            bary_input.delta = delta
+            bary_input.dInv = 0.0
+            lalpulsar.BarycenterEarth(bary_state, bary_input.tgps, self.__ephemerides)
+            lalpulsar.Barycenter(bary_emit, bary_input, bary_state)
+
+            # adjust reference time so that dt = 0 is tref in detector frame
+            tref += bary_emit.deltaT
+
+        # start signal time series 'Tpad_wf' before/after output strain time series
+        # add sufficient padding to signal for maximum Doppler modulation time shifts, otherwise
+        # lalpulsar.PulsarSimulateCoherentGW() will output zeros without complaint (unless
+        # you run with LAL_DEBUG_LEVEL=warning)
+        Tpad_wf = 2.0 * lal.AU_SI / lal.C_SI
+        tstart_wf = tstart - Tpad_wf
+        Nwf = int(math.ceil(float(Tdata + 2 * Tpad_wf) / float(dt_wf)))
+
+        # create REAL8TimeSeries to store signal phase
+        self.__phi = lal.CreateREAL8TimeSeries(
+            "phi", tstart_wf, 0, dt_wf, lal.DimensionlessUnit, Nwf
+        )
+
+        # create REAL4TimeVectorSeries to store signal amplitudes
+        # - LAL provides no creator function for this type, so must be done manually
+        self.__a = lal.REAL4TimeVectorSeries()
+        self.__a.name = "a+,ax"
+        self.__a.epoch = tstart_wf
+        self.__a.deltaT = dt_wf
+        self.__a.f0 = 0
+        self.__a.sampleUnits = lal.StrainUnit
+        self.__a.data = lal.CreateREAL4VectorSequence(Nwf, 2)
+
+        # call waveform() to fill time series of signal phase and amplitudes
+        dt = float(tstart_wf - tref)
+        for i in range(0, Nwf):
+            dphi, aplus, across = waveform(dt)
+            self.__phi.data.data[i] = phi0 + dphi
+            self.__a.data.data[i][0] = aplus
+            self.__a.data.data[i][1] = across
+            dt += dt_wf
+
+        # create and initialise PulsarCoherentGW struct
+        self.__wf = lalpulsar.PulsarCoherentGW()
+        self.__wf.position.system = lal.COORDINATESYSTEM_EQUATORIAL
+        self.__wf.position.longitude = alpha
+        self.__wf.position.latitude = delta
+        self.__wf.psi = psi
+        self.__wf.phi = self.__phi
+        self.__wf.a = self.__a
+
+        # create and initialise PulsarDetectorResponse struct
+        self.__detector = lalpulsar.PulsarDetectorResponse()
+        self.__detector.site = self.__site
+        self.__detector.ephemerides = self.__ephemerides
+
+    def _simulate_coherent_gw(self, h, noise_sqrt_Sh, noise_seed):
+        # generate strain time series
+        lalpulsar.PulsarSimulateCoherentGW(h, self.__wf, self.__detector)
+
+        # add Gaussian noise, if requested
+        if noise_sqrt_Sh > 0:
+            assert noise_seed is not None
+            assert noise_seed > 0
+            noise_sigma = math.sqrt(0.5 / h.deltaT) * noise_sqrt_Sh
+            lalpulsar.AddGaussianNoise(h, noise_sigma, noise_seed)
+
+    def get_strain(self, fs, tmin=0, tmax=None, noise_sqrt_Sh=0, noise_seed=None):
+        """
+        Generate strain time series of a continuous-wave signal in the detector frame.
+
+        @param fs: sampling frequency of strain time series, in Hz
+        @param tmin: start time for strain time series, as offsets from self.__tstart
+        @param tmax: start time for strain time series, as offsets from self.__tstart
+        @param noise_sqrt_Sh: if >0, add Gaussian noise with square-root single-sided power
+            spectral density given by this value, in Hz^(-1/2)
+        @param noise_seed: use this seed for the random number generator used to create noise;
+            required if noise_sqrt_Sh >0
+
+        @return (@b t, @b h), where:
+            @b t = start of time strain time series, in GPS seconds;
+            @b h = strain time series
+        """
+
+        # process tmin/tmax range (interpreted relative to self.__tstart)
+        if (tmin < 0) or (tmin >= self.__Tdata):
+            raise ValueError("tmin must be within [0,{}).".format(self.__Tdata))
+        if tmax is None:
+            tmax = self.__Tdata
+        elif (tmax <= 0) or (tmax > self.__Tdata):
+            raise ValueError("tmax must be within (0,{}].".format(self.__Tdata))
+        tspan = tmax - tmin
+
+        # create REAL4TimeSeries to store output time series
+        Nh = int(fs * tspan)
+        h = lal.CreateREAL4TimeSeries(
+            "h", self.__tstart + tmin, 0, 1.0 / fs, lal.DimensionlessUnit, Nh
+        )
+
+        # generate strain time series
+        self._simulate_coherent_gw(h, noise_sqrt_Sh, noise_seed)
+        return (h.epoch, h.data.data)
+
+    def get_strain_blocks(
+        self, fs, Tblock, noise_sqrt_Sh=0, noise_seed=None, prog_bar=None
+    ):
+        """
+        Generate strain time series of a continuous-wave signal in the detector frame, in contiguous blocks.
+
+        @param fs: sampling frequency of strain time series, in Hz
+        @param Tblock: length of each block, in seconds; should divide evenly into @b Tdata
+        @param noise_sqrt_Sh: if >0, add Gaussian noise with square-root single-sided power
+            spectral density given by this value, in Hz^(-1/2)
+        @param noise_seed: use this seed for the random number generator used to create noise;
+            if None, generate a random seed using os.urandom()
+        @param prog_bar: use to display a progress bar, e.g. prog_bar=tqdm
+
+        @return (@b t, @b h, @b i, @b N), where:
+            @b t = start of time strain time series, in GPS seconds;
+            @b h = strain time series;
+            @b i = block index, starting from zero;
+            @b N = number of blocks
+
+        This is a Python generator function and so should be called as follows:
+        ~~~
+        S = CWSimulator(...)
+        for t, h, i, N in S.get_strain_blocks(...):
+            ...
+        ~~~
+        """
+
+        # work out number of blocks
+        Nblock = int(round(self.__Tdata / Tblock))
+        if Tblock * Nblock > self.__Tdata:
+            raise ValueError(
+                "Length of block Tblock=%g does not divide evenly into Tdata=%g"
+                % (Tblock, self.__Tdata)
+            )
+
+        # if no noise seed is given, generate a (non-zero) random seed using os.urandom()
+        if not noise_seed:
+            noise_seed = 0
+            while not (0 < noise_seed and noise_seed < lal.LAL_INT4_MAX - Nblock):
+                noise_seed = int.from_bytes(os.urandom(4), sys.byteorder, signed=False)
+
+        # iterate over blocks
+        blocks = range(0, Nblock)
+        if prog_bar is not None:
+
+            # wrap iterator in progress bar
+            blocks = prog_bar(blocks)
+
+        # generate strain time series in blocks of length 'Tblock'
+        tmin = 0
+        for iblock in blocks:
+            epoch, hoft = self.get_strain(
+                fs,
+                tmin=tmin,
+                tmax=tmin + Tblock,
+                noise_sqrt_Sh=noise_sqrt_Sh,
+                noise_seed=noise_seed + iblock,
+            )
+            yield epoch, hoft, iblock, Nblock
+            tmin += Tblock
+
+    def write_frame_files(
+        self,
+        fs,
+        Tframe,
+        comment="simCW",
+        out_dir=".",
+        noise_sqrt_Sh=0,
+        noise_seed=None,
+        prog_bar=None,
+    ):
+        """
+        Write frame files [1] containing strain time series of a continuous-wave signal.
+
+        The strain time series is written as double-precision post-processed data (ProcData) channel named
+        <tt>&lt;detector&gt;:SIMCW-STRAIN</tt>,
+        where <tt>&lt;detector&gt;</tt> is the 2-character detector prefix (e.g. <tt>H1</tt> for LIGO Hanford,
+        <tt>L1</tt> for LIGO Livingston, <tt>V1</tt> for Virgo).
+
+        @param fs: sampling frequency of strain time series, in Hz
+        @param Tframe: length of each frame, in seconds; should divide evenly into @b Tdata
+        @param comment: frame file name comment, may only contain A-Z, a-z, 0-9, _, +, # characters
+        @param out_dir: output directory to write frame files into
+        @param noise_sqrt_Sh: if >0, add Gaussian noise with square-root single-sided power
+            spectral density given by this value, in Hz^(-1/2)
+        @param noise_seed: use this seed for the random number generator used to create noise;
+            if None, generate a random seed using os.urandom()
+        @param prog_bar: use to display a progress bar, e.g. prog_bar=tqdm
+
+        @return (@b file, @b i, @b N), where:
+            @b file = name of frame file just written;
+            @b i = frame file index, starting from zero;
+            @b N = number of frame files
+
+        This is a Python generator function and so should be called as follows:
+        ~~~
+        S = CWSimulator(...)
+        for file, i, N in S.write_frame_files(...):
+            ...
+        ~~~
+
+        [1] https://dcc.ligo.org/LIGO-T970130/public
+        """
+
+        try:
+            import lalframe
+        except ImportError:
+            raise ImportError("SWIG wrappings of LALFrame cannot be imported")
+
+        # check for valid frame filename comment (see LIGO-T010150)
+        valid_comment = re.compile(r"^[A-Za-z0-9_+#]+$")
+        if not valid_comment.match(comment):
+            raise ValueError(
+                "Frame file comment='%s' may only contain A-Z, a-z, 0-9, _, +, # characters"
+                % comment
+            )
+
+        # generate strain time series in blocks of length 'Tframe'
+        frame_h = None
+        for t, h, i, N in self.get_strain_blocks(
+            fs,
+            Tframe,
+            noise_sqrt_Sh=noise_sqrt_Sh,
+            noise_seed=noise_seed,
+            prog_bar=prog_bar,
+        ):
+            # create and initialise REAL8TimeSeries to write to frame files
+            if frame_h is None:
+                frame_h_channel = "%s:SIMCW-STRAIN" % self.__site.frDetector.prefix
+                frame_h = lal.CreateREAL8TimeSeries(
+                    frame_h_channel, t, 0, 1.0 / fs, lal.DimensionlessUnit, len(h)
+                )
+            frame_h.epoch = t
+            frame_h.data.data = h
+
+            # create standard frame file name (see LIGO-T010150)
+            frame_src = self.__site.frDetector.prefix[0]
+            frame_desc = comment
+            frame_t0 = int(t.gpsSeconds)
+            frame_Tdata = int(math.ceil(float(t + Tframe)) - math.floor(float(t)))
+            frame_name = "%s-%s-%u-%u.gwf" % (
+                frame_src,
+                frame_desc,
+                frame_t0,
+                frame_Tdata,
+            )
+            frame_path = os.path.join(out_dir, frame_name)
+
+            # create frame
+            frame_det_bits = 2 * self.__site_index
+            frame = lalframe.FrameNew(
+                t, Tframe, self.__class__.__name__, -1, i, frame_det_bits
+            )
+
+            # add strain time series to frame
+            lalframe.FrameAddREAL8TimeSeriesProcData(frame, frame_h)
+
+            # add history
+            lalframe.FrameAddFrHistory(frame, "origin", self.__origin_str)
+
+            # write frame
+            lalframe.FrameWrite(frame, frame_path)
+
+            # yield current file name for e.g. printing progress
+            yield frame_path, i, N
+
+    def get_sfts(
+        self,
+        fmax,
+        Tsft,
+        noise_sqrt_Sh=0,
+        noise_seed=None,
+        window="rectangular",
+        window_param=0,
+        prog_bar=None,
+        fmin=0,
+    ):
+        """
+        Generate SFTs [2] containing strain time series of a continuous-wave signal.
+
+        @param fmax: maximum SFT frequency, in Hz
+        @param Tsft: length of each SFT, in seconds; should divide evenly into @b Tdata
+        @param noise_sqrt_Sh: if >0, add Gaussian noise with square-root single-sided power
+            spectral density given by this value, in Hz^(-1/2)
+        @param noise_seed: use this seed for the random number generator used to create noise;
+            if None, generate a random seed using os.urandom()
+        @param window: if not None, window the time series before performing the FFT, using
+            the named window function; see XLALCreateNamedREAL8Window()
+        @param window_param: parameter for the window function given by @b window, if needed
+        @param prog_bar: use to display a progress bar, e.g. prog_bar=tqdm
+        @param fmin: if >0, minimum SFT frequency, in Hz
+            (note that this only modifies the output SFT bandwidth; internally a full-band SFT is still produced by sampling at 2*fmax)
+
+        @return (@b sft, @b i, @b N), where:
+            @b sft = SFT;
+            @b i = SFT file index, starting from zero;
+            @b N = number of SFTs
+
+        This is a Python generator function and so should be called as follows:
+        ~~~
+        S = CWSimulator(...)
+        for sft, i, N in S.get_sfts(...):
+            ...
+        ~~~
+
+        [2] https://dcc.ligo.org/LIGO-T040164/public
+        """
+
+        # create timestamps for generating one SFT per time series
+        sft_ts = lalpulsar.CreateTimestampVector(1)
+        sft_ts.deltaT = Tsft
+
+        # generate strain time series in blocks of length 'Tsft'
+        sft_h = None
+        sft_fs = 2 * fmax
+        for t, h, i, N in self.get_strain_blocks(
+            sft_fs,
+            Tsft,
+            noise_sqrt_Sh=noise_sqrt_Sh,
+            noise_seed=noise_seed,
+            prog_bar=prog_bar,
+        ):
+            # create and initialise REAL8TimeSeries to write to SFT files
+            if sft_h is None:
+                sft_name = self.__site.frDetector.prefix
+                sft_h = lal.CreateREAL8TimeSeries(
+                    sft_name, t, 0, 1.0 / sft_fs, lal.DimensionlessUnit, len(h)
+                )
+            sft_h.epoch = t
+            sft_h.data.data = h
+
+            # create SFT, possibly with windowing
+            sft_ts.data[0] = t
+            sft_vect = lalpulsar.MakeSFTsFromREAL8TimeSeries(
+                sft_h, sft_ts, window, window_param
+            )
+
+            if fmin != 0:
+                sft_vect = lalpulsar.ExtractStrictBandFromSFTVector(
+                    sft_vect, fMin=fmin, Band=fmax - fmin
+                )
+
+            # yield current SFT
+            yield sft_vect.data[0], i, N
+
+    def write_sft_files(
+        self,
+        fmax,
+        Tsft,
+        comment="simCW",
+        out_dir=".",
+        noise_sqrt_Sh=0,
+        noise_seed=None,
+        window="rectangular",
+        window_param=0,
+        prog_bar=None,
+        fmin=0,
+    ):
+        """
+        Write SFT files [2] containing strain time series of a continuous-wave signal.
+
+        @param fmax: maximum SFT frequency, in Hz
+        @param Tsft: length of each SFT, in seconds; should divide evenly into @b Tdata
+        @param comment: SFT file name comment, may only contain A-Z, a-z, 0-9 characters
+        @param out_dir: output directory to write SFT files into
+        @param noise_sqrt_Sh: if >0, add Gaussian noise with square-root single-sided power
+            spectral density given by this value, in Hz^(-1/2)
+        @param noise_seed: use this seed for the random number generator used to create noise;
+            if None, generate a random seed using os.urandom()
+        @param window: if not None, window the time series before performing the FFT, using
+            the named window function; see XLALCreateNamedREAL8Window()
+        @param window_param: parameter for the window function given by @b window, if needed
+        @param prog_bar: use to display a progress bar, e.g. prog_bar=tqdm
+        @param fmin: if >0, minimum SFT frequency, in Hz
+            (note that this only modifies the output SFT bandwidth; internally a full-band SFT is still produced by sampling at 2*fmax)
+
+        @return (@b file, @b i, @b N), where:
+            @b file = name of SFT file just written;
+            @b i = SFT file index, starting from zero;
+            @b N = number of SFT files
+
+        This is a Python generator function and so should be called as follows:
+        ~~~
+        S = CWSimulator(...)
+        for file, i, N in S.write_sft_files(...):
+            ...
+        ~~~
+
+        [2] https://dcc.ligo.org/LIGO-T040164/public
+        """
+
+        # check for valid SFT filename comment (see LIGO-T040164)
+        valid_comment = re.compile(r"^[A-Za-z0-9]+$")
+        if not valid_comment.match(comment):
+            raise ValueError(
+                "SFT file comment='%s' may only contain A-Z, a-z, 0-9 characters"
+                % comment
+            )
+
+        # create SFT filename specification
+        spec = lalpulsar.SFTFilenameSpec()
+        spec.path = out_dir
+        spec.window_type = window
+        spec.window_param = window_param
+        spec.privMisc = comment
+
+        # generate SFTs
+        for sft, i, N in self.get_sfts(
+            fmax,
+            Tsft,
+            noise_sqrt_Sh=noise_sqrt_Sh,
+            noise_seed=noise_seed,
+            window=window,
+            window_param=window_param,
+            prog_bar=prog_bar,
+            fmin=fmin,
+        ):
+            # write SFT
+            lalpulsar.WriteSFT2StandardFile(sft, spec, self.__origin_str)
+
+            # yield current file name for e.g. printing progress
+            sft_path = lalpulsar.BuildSFTFilenameFromSpec(spec)
+            yield sft_path, i, N
+
+
+## @}