homeassistant 2025.9.0b6__py3-none-any.whl → 2025.9.2__py3-none-any.whl

homeassistant/components/climate/translations/en-GB.json

@@ -149,13 +149,13 @@
             "message": "Provided humidity {humidity} is not valid. Accepted range is {min_humidity} to {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "Target temperature low can not be higher than Target temperature high."
+            "message": "'Lower target temperature' can not be higher than 'Upper target temperature'."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "Set temperature action was used with the target temperature parameter but the entity does not support it."
+            "message": "Set temperature action was used with the 'Target temperature' parameter but the entity does not support it."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "Set temperature action was used with the target temperature low/high parameter but the entity does not support it."
+            "message": "Set temperature action was used with the 'Lower/Upper target temperature' parameter but the entity does not support it."
         },
         "not_valid_fan_mode": {
             "message": "Fan mode {mode} is not valid. Valid fan modes are: {modes}."

homeassistant/components/climate/translations/en.json

@@ -149,13 +149,13 @@
             "message": "Provided humidity {humidity} is not valid. Accepted range is {min_humidity} to {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "Target temperature low can not be higher than Target temperature high."
+            "message": "'Lower target temperature' can not be higher than 'Upper target temperature'."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "Set temperature action was used with the target temperature parameter but the entity does not support it."
+            "message": "Set temperature action was used with the 'Target temperature' parameter but the entity does not support it."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "Set temperature action was used with the target temperature low/high parameter but the entity does not support it."
+            "message": "Set temperature action was used with the 'Lower/Upper target temperature' parameter but the entity does not support it."
         },
         "not_valid_fan_mode": {
             "message": "Fan mode {mode} is not valid. Valid fan modes are: {modes}."

homeassistant/components/climate/translations/es.json

@@ -149,13 +149,13 @@
             "message": "La humedad proporcionada {humidity} no es v\u00e1lida. El rango aceptado es de {min_humidity} a {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "La temperatura objetivo inferior no puede ser mayor que la temperatura objetivo superior."
+            "message": "La 'temperatura deseada inferior' no puede ser mayor que la 'temperatura deseada superior'."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "Se utiliz\u00f3 la acci\u00f3n de establecer temperatura con el par\u00e1metro de temperatura objetivo, pero la entidad no la admite."
+            "message": "Se utiliz\u00f3 la acci\u00f3n de temperatura establecida con el par\u00e1metro 'Temperatura deseada', pero la entidad no lo admite."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "Se utiliz\u00f3 la acci\u00f3n de temperatura establecida con el par\u00e1metro de temperatura objetivo baja/alta, pero la entidad no lo admite."
+            "message": "Se utiliz\u00f3 la acci\u00f3n de temperatura establecida con el par\u00e1metro 'Temperatura deseada inferior/superior', pero la entidad no lo admite."
         },
         "not_valid_fan_mode": {
             "message": "El modo ventilador {mode} no es v\u00e1lido. Los modos de ventilador v\u00e1lidos son: {modes}."

homeassistant/components/climate/translations/et.json

@@ -149,7 +149,7 @@
             "message": "Soovitav niiskus {humidity} ei p\u00e4de. Lubatud vahemik on {min_humidity} kuni {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "Madal sihttemperatuur ei saa olla k\u00f5rgem kui k\u00f5rge sihttemperatuur."
+            "message": "Alumine sihttemperatuur ei saa olla k\u00f5rgem kui \u00fclemine sihttemperatuur."
         },
         "missing_target_temperature_entity_feature": {
             "message": "M\u00e4\u00e4ratud temperatuuri toimingut kasutati koos sihttemperatuuri parameetriga kuid olem seda ei toeta."

homeassistant/components/climate/translations/fr.json

@@ -149,13 +149,7 @@
             "message": "L'humidit\u00e9 fournie {humidity} n'est pas valide. La plage accept\u00e9e est {min_humidity} \u00e0 {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "La temp\u00e9rature cible basse ne peut pas \u00eatre sup\u00e9rieure \u00e0 la temp\u00e9rature cible haute."
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "L\u2019action D\u00e9finir la temp\u00e9rature a \u00e9t\u00e9 utilis\u00e9e avec le param\u00e8tre de temp\u00e9rature cible, mais l\u2019entit\u00e9 ne la prend pas en charge."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "L'action D\u00e9finir la temp\u00e9rature a \u00e9t\u00e9 utilis\u00e9e avec le param\u00e8tre de temp\u00e9rature cible basse/haute, mais l'entit\u00e9 ne le prend pas en charge."
+            "message": "La \u00ab\u00a0temp\u00e9rature cible inf\u00e9rieure\u00a0\u00bb ne peut pas \u00eatre sup\u00e9rieure \u00e0 la \u00ab\u00a0temp\u00e9rature cible sup\u00e9rieure\u00a0\u00bb."
         },
         "not_valid_fan_mode": {
             "message": "Le mode de ventilation {mode} n'est pas valide. Les modes de ventilation valides sont les suivants\u00a0: {modes}."

homeassistant/components/climate/translations/fy.json

@@ -10,6 +10,7 @@
                 },
                 "preset_mode": {
                     "state": {
+                        "activity": "Aktiviteit",
                         "away": "\u00d4fw\u00eazich"
                     }
                 }

homeassistant/components/climate/translations/ga.json

@@ -148,15 +148,6 @@
         "humidity_out_of_range": {
             "message": "N\u00edl an taise a chuirtear ar f\u00e1il {humidity} bail\u00ed. Is \u00e9 {min_humidity} go {max_humidity} an raon glactha."
         },
-        "low_temp_higher_than_high_temp": {
-            "message": "N\u00ed f\u00e9idir leis an teocht sprice \u00edseal a bheith n\u00edos airde n\u00e1 an teocht sprice ard."
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "Baineadh \u00fas\u00e1id as gn\u00edomh socraithe teochta leis an bparaim\u00e9adar teochta sprice ach n\u00ed thaca\u00edonn an t-eintiteas leis."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "Baineadh \u00fas\u00e1id as gn\u00edomh socraithe teochta leis an bparaim\u00e9adar teochta sprice \u00edseal/ard ach n\u00ed thaca\u00edonn an t-eintiteas leis."
-        },
         "not_valid_fan_mode": {
             "message": "N\u00edl m\u00f3d lucht lean\u00fana {mode} bail\u00ed. Is iad na modhanna lucht lean\u00fana bail\u00ed n\u00e1: {modes}."
         },

homeassistant/components/climate/translations/he.json

@@ -149,13 +149,13 @@
             "message": "\u05d4\u05dc\u05d7\u05d5\u05ea \u05d4\u05de\u05e1\u05d5\u05e4\u05e7\u05ea {humidity} \u05d0\u05d9\u05e0\u05d5 \u05d7\u05d5\u05e7\u05d9\u05ea. \u05d4\u05d8\u05d5\u05d5\u05d7 \u05d4\u05de\u05e7\u05d5\u05d1\u05dc \u05d4\u05d5\u05d0 {min_humidity} \u05e2\u05d3 {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "\u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d9\u05e2\u05d3 \u05e0\u05de\u05d5\u05db\u05d4 \u05dc\u05d0 \u05d9\u05db\u05d5\u05dc\u05d4 \u05dc\u05d4\u05d9\u05d5\u05ea \u05d2\u05d1\u05d5\u05d4\u05d4 \u05d9\u05d5\u05ea\u05e8 \u05de\u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d4\u05d9\u05e2\u05d3 \u05d2\u05d1\u05d5\u05d4\u05d4."
+            "message": "'\u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d9\u05e2\u05d3 \u05ea\u05d7\u05ea\u05d5\u05e0\u05d4' \u05dc\u05d0 \u05d9\u05db\u05d5\u05dc\u05d4 \u05dc\u05d4\u05d9\u05d5\u05ea \u05d2\u05d1\u05d5\u05d4\u05d4 \u05d9\u05d5\u05ea\u05e8 \u05de'\u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d9\u05e2\u05d3 \u05e2\u05dc\u05d9\u05d5\u05e0\u05d4'."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "\u05e0\u05e2\u05e9\u05d4 \u05e9\u05d9\u05de\u05d5\u05e9 \u05d1\u05e4\u05e2\u05d5\u05dc\u05ea \u05d4\u05d2\u05d3\u05e8\u05ea \u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05d4 \u05e2\u05dd \u05e4\u05e8\u05de\u05d8\u05e8 \u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d4\u05d9\u05e2\u05d3 \u05d0\u05da \u05d4\u05d9\u05e9\u05d5\u05ea \u05d0\u05d9\u05e0\u05d4 \u05ea\u05d5\u05de\u05db\u05ea \u05d1\u05d4."
+            "message": "\u05e4\u05e2\u05d5\u05dc\u05ea \u05e7\u05d1\u05d9\u05e2\u05ea \u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05d4 \u05e0\u05d5\u05e1\u05e4\u05d4 \u05e2\u05dd \u05d4\u05e4\u05e8\u05de\u05d8\u05e8 '\u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d9\u05e2\u05d3' \u05d0\u05da \u05d4\u05d9\u05e9\u05d5\u05ea \u05d0\u05d9\u05e0\u05d4 \u05ea\u05d5\u05de\u05db\u05ea \u05d1\u05d4."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "\u05e0\u05e2\u05e9\u05d4 \u05e9\u05d9\u05de\u05d5\u05e9 \u05d1\u05e4\u05e2\u05d5\u05dc\u05ea \u05d4\u05d2\u05d3\u05e8\u05ea \u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05d4 \u05e2\u05dd \u05d4\u05e4\u05e8\u05de\u05d8\u05e8 \u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d9\u05e2\u05d3 \u05e0\u05de\u05d5\u05db\u05d4/\u05d2\u05d1\u05d5\u05d4\u05d4, \u05d0\u05da \u05d4\u05d9\u05e9\u05d5\u05ea \u05d0\u05d9\u05e0\u05d4 \u05ea\u05d5\u05de\u05db\u05ea \u05d1\u05d4."
+            "message": "\u05e4\u05e2\u05d5\u05dc\u05ea \u05e7\u05d1\u05d9\u05e2\u05ea \u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05d4 \u05e0\u05d5\u05e1\u05e4\u05d4 \u05e2\u05dd \u05d4\u05e4\u05e8\u05de\u05d8\u05e8 '\u05d8\u05de\u05e4\u05e8\u05d8\u05d5\u05e8\u05ea \u05d9\u05e2\u05d3 \u05ea\u05d7\u05ea\u05d5\u05e0\u05d4/\u05e2\u05dc\u05d9\u05d5\u05df' \u05d0\u05da \u05d4\u05d9\u05e9\u05d5\u05ea \u05d0\u05d9\u05e0\u05d4 \u05ea\u05d5\u05de\u05db\u05ea \u05d1\u05d4."
         },
         "not_valid_fan_mode": {
             "message": "\u05de\u05e6\u05d1 \u05de\u05d0\u05d5\u05d5\u05e8\u05e8 {mode} \u05d0\u05d9\u05e0\u05d5 \u05d7\u05d5\u05e7\u05d9. \u05de\u05e6\u05d1\u05d9 \u05de\u05d0\u05d5\u05d5\u05e8\u05e8 \u05d7\u05d5\u05e7\u05d9\u05d9\u05dd \u05d4\u05dd: {modes}."

homeassistant/components/climate/translations/hu.json

@@ -148,15 +148,6 @@
         "humidity_out_of_range": {
             "message": "A megadott p\u00e1ratartalom {humidity} \u00e9rv\u00e9nytelen. Az elfogadott tartom\u00e1ny {min_humidity} \u00e9s {max_humidity} k\u00f6z\u00f6tt van."
         },
-        "low_temp_higher_than_high_temp": {
-            "message": "A c\u00e9l h\u0151m\u00e9rs\u00e9klet als\u00f3 \u00e9rt\u00e9ke nem lehet magasabb, mint a c\u00e9l h\u0151m\u00e9rs\u00e9klet fels\u0151 \u00e9rt\u00e9ke."
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "A h\u0151m\u00e9rs\u00e9klet be\u00e1ll\u00edt\u00e1s\u00e1ra szolg\u00e1l\u00f3 m\u0171veletet a c\u00e9lh\u0151m\u00e9rs\u00e9klet param\u00e9terrel haszn\u00e1lt\u00e1k, de az entit\u00e1s ezt nem t\u00e1mogatja."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "A h\u0151m\u00e9rs\u00e9klet be\u00e1ll\u00edt\u00e1s\u00e1ra szolg\u00e1l\u00f3 m\u0171veletet a c\u00e9lh\u0151m\u00e9rs\u00e9klet als\u00f3/fels\u0151 param\u00e9terrel haszn\u00e1lt\u00e1k, de az entit\u00e1s ezt nem t\u00e1mogatja."
-        },
         "not_valid_fan_mode": {
             "message": "A ventil\u00e1tor \u00fczemm\u00f3d {mode} nem \u00e9rv\u00e9nyes. Az \u00e9rv\u00e9nyes ventil\u00e1tor \u00fczemm\u00f3dok a k\u00f6vetkez\u0151k: {modes}."
         },

homeassistant/components/climate/translations/id.json

@@ -148,15 +148,6 @@
         "humidity_out_of_range": {
             "message": "Kelembapan yang diberikan {humidity} tidak valid. Rentang yang diizinkan adalah {min_humidity} hingga {max_humidity}."
         },
-        "low_temp_higher_than_high_temp": {
-            "message": "Target suhu bawah tidak boleh lebih tinggi dari Target suhu atas."
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "Aksi pengaturan suhu digunakan dengan parameter suhu target tetapi entitas tidak mendukungnya."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "Aksi pengaturan suhu digunakan dengan parameter suhu target panas/dingin tetapi entitas tidak mendukungnya."
-        },
         "not_valid_fan_mode": {
             "message": "Mode kipas {mode} tidak valid. Mode kipas yang valid adalah: {modes}."
         },

homeassistant/components/climate/translations/it.json

@@ -138,9 +138,6 @@
         }
     },
     "exceptions": {
-        "low_temp_higher_than_high_temp": {
-            "message": "La temperatura obiettivo bassa non pu\u00f2 essere superiore alla temperatura obiettivo alta."
-        },
         "not_valid_hvac_mode": {
             "message": "La modalit\u00e0 HVAC {mode} non \u00e8 valida. Le modalit\u00e0 HVAC valide sono: {modes}."
         }

homeassistant/components/climate/translations/ja.json

@@ -142,15 +142,6 @@
         "humidity_out_of_range": {
             "message": "\u6307\u5b9a\u3055\u308c\u305f\u6e7f\u5ea6{humidity}\u306f\u7121\u52b9\u3067\u3059\u3002\u8a31\u5bb9\u7bc4\u56f2\u306f{min_humidity}\u304b\u3089{max_humidity}\u3067\u3059\u3002"
         },
-        "low_temp_higher_than_high_temp": {
-            "message": "\u76ee\u6a19\u6e29\u5ea6\u4e0b\u9650\u306f\u76ee\u6a19\u6e29\u5ea6\u4e0a\u9650\u3088\u308a\u9ad8\u304f\u3067\u304d\u307e\u305b\u3093\u3002"
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "\u6e29\u5ea6\u8a2d\u5b9a\u30a2\u30af\u30b7\u30e7\u30f3\u304c\u30bf\u30fc\u30b2\u30c3\u30c8\u6e29\u5ea6\u30d1\u30e9\u30e1\u30fc\u30bf\u3068\u3068\u3082\u306b\u4f7f\u7528\u3055\u308c\u307e\u3057\u305f\u304c\u3001\u30a8\u30f3\u30c6\u30a3\u30c6\u30a3\u306f\u305d\u308c\u3092\u30b5\u30dd\u30fc\u30c8\u3057\u3066\u3044\u307e\u305b\u3093\u3002"
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "\u6e29\u5ea6\u8a2d\u5b9a\u30a2\u30af\u30b7\u30e7\u30f3\u304c\u30bf\u30fc\u30b2\u30c3\u30c8\u6e29\u5ea6\u306e\u4f4e/\u9ad8\u30d1\u30e9\u30e1\u30fc\u30bf\u3068\u3068\u3082\u306b\u4f7f\u7528\u3055\u308c\u307e\u3057\u305f\u304c\u3001\u30a8\u30f3\u30c6\u30a3\u30c6\u30a3\u306f\u305d\u308c\u3092\u30b5\u30dd\u30fc\u30c8\u3057\u3066\u3044\u307e\u305b\u3093\u3002"
-        },
         "not_valid_fan_mode": {
             "message": "\u30d5\u30a1\u30f3 \u30e2\u30fc\u30c9{mode}\u304c\u7121\u52b9\u3067\u3059\u3002\u6709\u52b9\u306a\u30d5\u30a1\u30f3 \u30e2\u30fc\u30c9\u306f\u6b21\u306e\u3068\u304a\u308a\u3067\u3059: {modes} \u3002"
         },

homeassistant/components/climate/translations/ko.json

@@ -120,14 +120,6 @@
             }
         }
     },
-    "exceptions": {
-        "missing_target_temperature_entity_feature": {
-            "message": "\uc628\ub3c4 \uc124\uc815 \ub3d9\uc791\uc774 \ubaa9\ud45c \uc628\ub3c4 \ub9e4\uac1c \ubcc0\uc218\uc640 \ud568\uaed8 \uc0ac\uc6a9\ub418\uc5c8\uc9c0\ub9cc \uad6c\uc131\uc694\uc18c\uac00 \uc774\ub97c \uc9c0\uc6d0\ud558\uc9c0 \uc54a\uc2b5\ub2c8\ub2e4."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "\uc124\uc815 \uc628\ub3c4 \ub3d9\uc791\uc774 \ubaa9\ud45c \uc628\ub3c4 \ub0ae\uc74c/\ub192\uc74c \ub9e4\uac1c \ubcc0\uc218\uc640 \ud568\uaed8 \uc0ac\uc6a9\ub418\uc5c8\uc9c0\ub9cc \uad6c\uc131\uc694\uc18c\uac00 \uc774\ub97c \uc9c0\uc6d0\ud558\uc9c0 \uc54a\uc2b5\ub2c8\ub2e4."
-        }
-    },
     "selector": {
         "hvac_mode": {
             "options": {

homeassistant/components/climate/translations/lt.json

@@ -149,13 +149,13 @@
             "message": "Pateikta oro dr\u0117gm\u0117 {humidity} negalioja. Priimtas diapazonas yra {min_humidity} iki {max_humidity} ."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "\u017dema tikslin\u0117 temperat\u016bra negali b\u016bti auk\u0161tesn\u0117 nei auk\u0161ta tikslin\u0117 temperat\u016bra."
+            "message": "'Apatin\u0117 tikslin\u0117 temperat\u016bra' negali b\u016bti auk\u0161tesn\u0117 u\u017e 'Vir\u0161utin\u0119 tikslin\u0119 temperat\u016br\u0105'."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "Nustatytos temperat\u016bros veiksmas buvo naudojamas su tikslin\u0117s temperat\u016bros parametru, bet subjektas jo nepalaiko."
+            "message": "Nustatytos temperat\u016bros veiksmas buvo panaudotas su parametru 'Tikslin\u0117 temperat\u016bra', bet objektas jo nepalaiko."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "Nustatytos temperat\u016bros veiksmas buvo naudojamas su tikslin\u0117s temperat\u016bros \u017eemos/auk\u0161tos temperat\u016bros parametru, bet subjektas jo nepalaiko."
+            "message": "Nustatytos temperat\u016bros veiksmas buvo panaudotas su parametru 'Apatin\u0117/vir\u0161utin\u0117 tikslin\u0117 temperat\u016bra', bet objektas jo nepalaiko."
         },
         "not_valid_fan_mode": {
             "message": "Ventiliatoriaus re\u017eimas {mode} negalioja. Tinkami ventiliatoriaus re\u017eimai: {modes} ."

homeassistant/components/climate/translations/nl.json

@@ -139,9 +139,6 @@
         }
     },
     "exceptions": {
-        "low_temp_higher_than_high_temp": {
-            "message": "De doeltemperatuur laag kan niet hoger zijn dan de doeltemperatuur hoog."
-        },
         "not_valid_fan_mode": {
             "message": "Ventilator modus {mode} is niet geldig. Geldige ventilatormodi zijn: {modes}."
         },

homeassistant/components/climate/translations/pl.json

@@ -31,7 +31,7 @@
                 "fan_only": "tylko wentylator",
                 "heat": "grzanie",
                 "heat_cool": "grzanie/ch\u0142odzenie",
-                "off": "wy\u0142\u0105czono"
+                "off": "wy\u0142\u0105czony"
             },
             "state_attributes": {
                 "current_humidity": {
@@ -46,8 +46,8 @@
                         "diffuse": "rozproszony nawiew",
                         "focus": "skupiony nawiew",
                         "middle": "po\u015bredni",
-                        "off": "wy\u0142\u0105czono",
-                        "on": "w\u0142\u0105czono",
+                        "off": "wy\u0142\u0105czony",
+                        "on": "w\u0142\u0105czony",
                         "top": "nawiew g\u00f3rny"
                     }
                 },
@@ -66,7 +66,7 @@
                         "fan": "wentylator",
                         "heating": "grzanie",
                         "idle": "brak aktywno\u015bci",
-                        "off": "wy\u0142\u0105czono",
+                        "off": "wy\u0142\u0105czony",
                         "preheating": "Podgrzewanie wst\u0119pne"
                     }
                 },
@@ -102,8 +102,8 @@
                 },
                 "swing_horizontal_mode": {
                     "state": {
-                        "off": "wy\u0142\u0105czono",
-                        "on": "w\u0142\u0105czono"
+                        "off": "wy\u0142\u0105czony",
+                        "on": "w\u0142\u0105czony"
                     }
                 },
                 "swing_mode": {
@@ -111,8 +111,8 @@
                     "state": {
                         "both": "ruch w obu p\u0142aszczyznach",
                         "horizontal": "ruch poziomy",
-                        "off": "wy\u0142\u0105czono",
-                        "on": "w\u0142\u0105czono",
+                        "off": "wy\u0142\u0105czony",
+                        "on": "w\u0142\u0105czony",
                         "vertical": "ruch pionowy"
                     }
                 },
@@ -137,13 +137,13 @@
     "selector": {
         "hvac_mode": {
             "options": {
-                "auto": "Auto",
+                "auto": "auto",
                 "cool": "Ch\u0142odzenie",
                 "dry": "Osuszanie",
                 "fan_only": "Wentylacja",
                 "heat": "Grzanie",
                 "heat_cool": "grzanie/ch\u0142odzenie",
-                "off": "wy\u0142\u0105czono"
+                "off": "wy\u0142\u0105czony"
             }
         }
     },

homeassistant/components/climate/translations/pt.json

@@ -149,13 +149,13 @@
             "message": "A humidade fornecida {humidity} n\u00e3o \u00e9 v\u00e1lida. O intervalo aceite \u00e9 de {min_humidity} a {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "A temperatura alvo baixa n\u00e3o pode ser superior \u00e0 temperatura alvo alta."
+            "message": "A \"Temperatura-alvo inferior\" n\u00e3o pode ser superior \u00e0 \"Temperatura-alvo superior\"."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "A a\u00e7\u00e3o definir temperatura foi utilizada com o par\u00e2metro de temperatura alvo, mas a entidade n\u00e3o o suporta."
+            "message": "A a\u00e7\u00e3o definir temperatura foi utilizada com o par\u00e2metro \"Temperatura alvo\", mas a entidade n\u00e3o a suporta."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "A a\u00e7\u00e3o definir temperatura foi utilizada com o par\u00e2metro de temperatura alvo baixa/alta, mas a entidade n\u00e3o o suporta."
+            "message": "A a\u00e7\u00e3o definir temperatura foi utilizada com o par\u00e2metro \"Temperatura alvo inferior/superior\", mas a entidade n\u00e3o o suporta."
         },
         "not_valid_fan_mode": {
             "message": "O modo de ventila\u00e7\u00e3o {mode} n\u00e3o \u00e9 v\u00e1lido. Modos de ventila\u00e7\u00e3o v\u00e1lidos s\u00e3o: {modes}."

homeassistant/components/climate/translations/ru.json

@@ -149,13 +149,13 @@
             "message": "\u041f\u0440\u0435\u0434\u043e\u0441\u0442\u0430\u0432\u043b\u0435\u043d\u043d\u0430\u044f \u0432\u043b\u0430\u0436\u043d\u043e\u0441\u0442\u044c {humidity} \u043d\u0435\u0434\u0435\u0439\u0441\u0442\u0432\u0438\u0442\u0435\u043b\u044c\u043d\u0430. \u0414\u043e\u043f\u0443\u0441\u0442\u0438\u043c\u044b\u0439 \u0434\u0438\u0430\u043f\u0430\u0437\u043e\u043d \u043e\u0442 {min_humidity} \u0434\u043e {max_humidity}."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "\u041d\u0438\u0436\u043d\u044f\u044f \u0433\u0440\u0430\u043d\u0438\u0446\u0430 \u0446\u0435\u043b\u0435\u0432\u043e\u0439 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b \u043d\u0435 \u043c\u043e\u0436\u0435\u0442 \u0431\u044b\u0442\u044c \u0432\u044b\u0448\u0435 \u0432\u0435\u0440\u0445\u043d\u0435\u0439 \u0433\u0440\u0430\u043d\u0438\u0446\u044b \u0446\u0435\u043b\u0435\u0432\u043e\u0439 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b."
+            "message": "'\u041d\u0438\u0436\u043d\u044f\u044f \u0433\u0440\u0430\u043d\u0438\u0446\u0430 \u0446\u0435\u043b\u0435\u0432\u043e\u0439 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b' \u043d\u0435 \u043c\u043e\u0436\u0435\u0442 \u0431\u044b\u0442\u044c \u0432\u044b\u0448\u0435 '\u0412\u0435\u0440\u0445\u043d\u044f\u044f \u0433\u0440\u0430\u043d\u0438\u0446\u0430 \u0446\u0435\u043b\u0435\u0432\u043e\u0439 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b'."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "\u0414\u0435\u0439\u0441\u0442\u0432\u0438\u0435 \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043a\u0438 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b \u0431\u044b\u043b\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u043e \u0441 \u043f\u0430\u0440\u0430\u043c\u0435\u0442\u0440\u043e\u043c \u0446\u0435\u043b\u0435\u0432\u043e\u0439 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b, \u043d\u043e \u043e\u0431\u044a\u0435\u043a\u0442 \u043d\u0435 \u043f\u043e\u0434\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0435\u0442 \u0435\u0433\u043e."
+            "message": "\u0414\u0435\u0439\u0441\u0442\u0432\u0438\u0435 \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043a\u0438 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b \u0431\u044b\u043b\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u043e \u0441 \u043f\u0430\u0440\u0430\u043c\u0435\u0442\u0440\u043e\u043c '\u0426\u0435\u043b\u0435\u0432\u0430\u044f \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0430', \u043d\u043e \u043e\u0431\u044a\u0435\u043a\u0442 \u043d\u0435 \u043f\u043e\u0434\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0435\u0442 \u0435\u0433\u043e."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "\u0414\u0435\u0439\u0441\u0442\u0432\u0438\u0435 \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043a\u0438 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b \u0431\u044b\u043b\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u043e \u0441 \u043f\u0430\u0440\u0430\u043c\u0435\u0442\u0440\u043e\u043c \u043d\u0438\u0436\u043d\u0435\u0439/\u0432\u0435\u0440\u0445\u043d\u0435\u0439 \u0446\u0435\u043b\u0435\u0432\u043e\u0439 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b, \u043d\u043e \u043e\u0431\u044a\u0435\u043a\u0442 \u043d\u0435 \u043f\u043e\u0434\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0435\u0442 \u0435\u0433\u043e."
+            "message": "\u0414\u0435\u0439\u0441\u0442\u0432\u0438\u0435 \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043a\u0438 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u044b \u0431\u044b\u043b\u043e \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u043e\u0432\u0430\u043d\u043e \u0441 \u043f\u0430\u0440\u0430\u043c\u0435\u0442\u0440\u043e\u043c '\u041d\u0438\u0436\u043d\u044f\u044f/\u0412\u0435\u0440\u0445\u043d\u044f\u044f \u0446\u0435\u043b\u0435\u0432\u0430\u044f \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0430', \u043d\u043e \u043e\u0431\u044a\u0435\u043a\u0442 \u043d\u0435 \u043f\u043e\u0434\u0434\u0435\u0440\u0436\u0438\u0432\u0430\u0435\u0442 \u0435\u0433\u043e."
         },
         "not_valid_fan_mode": {
             "message": "\u0420\u0435\u0436\u0438\u043c \u0432\u0435\u043d\u0442\u0438\u043b\u044f\u0442\u043e\u0440\u0430 {mode} \u043d\u0435\u0434\u0435\u0439\u0441\u0442\u0432\u0438\u0442\u0435\u043b\u0435\u043d. \u0414\u043e\u043f\u0443\u0441\u0442\u0438\u043c\u044b\u0435 \u0440\u0435\u0436\u0438\u043c\u044b \u0432\u0435\u043d\u0442\u0438\u043b\u044f\u0442\u043e\u0440\u0430: {modes}."

homeassistant/components/climate/translations/sk.json

@@ -149,13 +149,13 @@
             "message": "Zadan\u00e1 vlhkos\u0165 {humidity} nie je platn\u00e1. Akceptovan\u00fd rozsah je {min_humidity} a\u017e {max_humidity} ."
         },
         "low_temp_higher_than_high_temp": {
-            "message": "Cie\u013eov\u00e1 teplota n\u00edzka nem\u00f4\u017ee by\u0165 vy\u0161\u0161ia ako cie\u013eov\u00e1 teplota vysok\u00e1."
+            "message": "'Doln\u00e1 cie\u013eov\u00e1 teplota' nem\u00f4\u017ee by\u0165 vy\u0161\u0161ia ako 'Horn\u00e1 cie\u013eov\u00e1 teplota'."
         },
         "missing_target_temperature_entity_feature": {
-            "message": "Bola pou\u017eit\u00e1 akcia Nastavi\u0165 teplotu s parametrom cie\u013eovej teploty, ale entita ju nepodporuje."
+            "message": "Bola pou\u017eit\u00e1 akcia Nastavi\u0165 teplotu s parametrom 'Cie\u013eov\u00e1 teplota', ale entita ju nepodporuje."
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "Bola pou\u017eit\u00e1 akcia Nastavi\u0165 teplotu s parametrom cie\u013eovej teploty n\u00edzka/vysok\u00e1, ale entita ju nepodporuje."
+            "message": "Bola pou\u017eit\u00e1 akcia Nastavi\u0165 teplotu s parametrom 'Ni\u017e\u0161ia/vy\u0161\u0161ia cie\u013eov\u00e1 teplota', ale entita ju nepodporuje."
         },
         "not_valid_fan_mode": {
             "message": "Re\u017eim ventil\u00e1tora {mode} nie je platn\u00fd. Platn\u00e9 re\u017eimy ventil\u00e1tora s\u00fa: {modes}."

homeassistant/components/climate/translations/sl.json

@@ -140,7 +140,8 @@
                 "dry": "Su\u0161enje",
                 "fan_only": "Samo ventilacija",
                 "heat": "Gretje",
-                "heat_cool": "Gretje/hlajenje"
+                "heat_cool": "Gretje/hlajenje",
+                "off": "Izklopljeno"
             }
         }
     },

homeassistant/components/climate/translations/sv.json

@@ -148,15 +148,6 @@
         "humidity_out_of_range": {
             "message": "Angiven fuktighet {humidity} \u00e4r inte giltig. Accepterat intervall \u00e4r {min_humidity} till {max_humidity}."
         },
-        "low_temp_higher_than_high_temp": {
-            "message": "M\u00e5ltemperatur l\u00e5g kan inte vara h\u00f6gre \u00e4n M\u00e5ltemperatur h\u00f6g."
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "\u00c5tg\u00e4rden Ange temperatur anv\u00e4ndes med m\u00e5ltemperaturparametern, men entiteten st\u00f6der den inte."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "\u00c5tg\u00e4rden Ange temperatur anv\u00e4ndes med parametern f\u00f6r l\u00e5g/h\u00f6g m\u00e5ltemperatur, men entiteten st\u00f6der den inte."
-        },
         "not_valid_fan_mode": {
             "message": "Fl\u00e4ktl\u00e4get {mode} \u00e4r inte giltigt. Giltiga fl\u00e4ktl\u00e4gen \u00e4r: {modes} ."
         },

homeassistant/components/climate/translations/tr.json

@@ -142,15 +142,6 @@
         "humidity_out_of_range": {
             "message": "Sa\u011flanan nem {humidity} ge\u00e7erli de\u011fil. Kabul edilen aral\u0131k {min_humidity} ile {max_humidity} aras\u0131ndad\u0131r."
         },
-        "low_temp_higher_than_high_temp": {
-            "message": "Hedef s\u0131cakl\u0131k d\u00fc\u015f\u00fck de\u011feri Hedef s\u0131cakl\u0131k y\u00fcksek de\u011ferinden daha y\u00fcksek olamaz."
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "Hedef s\u0131cakl\u0131k parametresiyle birlikte S\u0131cakl\u0131k Ayar\u0131 eylemi kullan\u0131ld\u0131 ancak varl\u0131k bunu desteklemiyor."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "Hedef s\u0131cakl\u0131k d\u00fc\u015f\u00fck/y\u00fcksek parametresiyle s\u0131cakl\u0131k ayarlama eylemi kullan\u0131ld\u0131 ancak varl\u0131k bunu desteklemiyor."
-        },
         "not_valid_fan_mode": {
             "message": "Fan modu {mode} ge\u00e7erli de\u011fil. Ge\u00e7erli fan modlar\u0131 \u015funlard\u0131r: {modes} ."
         },

homeassistant/components/climate/translations/uk.json

@@ -128,15 +128,6 @@
         "humidity_out_of_range": {
             "message": "\u041d\u0430\u0432\u0435\u0434\u0435\u043d\u0430 \u0432\u043e\u043b\u043e\u0433\u0456\u0441\u0442\u044c {humidity} \u043d\u0435 \u0454 \u0434\u0456\u0439\u0441\u043d\u043e\u044e. \u0414\u043e\u043f\u0443\u0441\u0442\u0438\u043c\u0438\u0439 \u0434\u0456\u0430\u043f\u0430\u0437\u043e\u043d \u0432\u0456\u0434 {min_humidity} \u0434\u043e {max_humidity}."
         },
-        "low_temp_higher_than_high_temp": {
-            "message": "\u041d\u0438\u0436\u043d\u044f \u0446\u0456\u043b\u044c\u043e\u0432\u0430 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0430 \u043d\u0435 \u043c\u043e\u0436\u0435 \u0431\u0443\u0442\u0438 \u0432\u0438\u0449\u043e\u044e \u0437\u0430 \u0432\u0435\u0440\u0445\u043d\u044e \u0446\u0456\u043b\u044c\u043e\u0432\u0443 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0443."
-        },
-        "missing_target_temperature_entity_feature": {
-            "message": "\u0414\u0456\u044e \"\u0417\u0430\u0434\u0430\u0442\u0438 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0443\" \u0431\u0443\u043b\u043e \u0432\u0438\u043a\u043e\u0440\u0438\u0441\u0442\u0430\u043d\u043e \u0437 \u043f\u0430\u0440\u0430\u043c\u0435\u0442\u0440\u043e\u043c \"\u0426\u0456\u043b\u044c\u043e\u0432\u0430 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0430\", \u0430\u043b\u0435 \u0441\u0443\u0442\u043d\u0456\u0441\u0442\u044c \u0457\u0457 \u043d\u0435 \u043f\u0456\u0434\u0442\u0440\u0438\u043c\u0443\u0454."
-        },
-        "missing_target_temperature_range_entity_feature": {
-            "message": "\u0414\u0456\u044f \"\u0417\u0430\u0434\u0430\u0442\u0438 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0443\" \u0431\u0443\u043b\u0430 \u0432\u0438\u043a\u043e\u0440\u0438\u0441\u0442\u0430\u043d\u0430 \u0437 \u043f\u0430\u0440\u0430\u043c\u0435\u0442\u0440\u043e\u043c \u043d\u0438\u0437\u044c\u043a\u043e\u0457/\u0432\u0438\u0441\u043e\u043a\u043e\u0457 \u0446\u0456\u043b\u044c\u043e\u0432\u043e\u0457 \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0438, \u0430\u043b\u0435 \u0441\u0443\u0442\u043d\u0456\u0441\u0442\u044c \u043d\u0435 \u043f\u0456\u0434\u0442\u0440\u0438\u043c\u0443\u0454 \u0457\u0457."
-        },
         "not_valid_fan_mode": {
             "message": "\u0420\u0435\u0436\u0438\u043c \u0432\u0435\u043d\u0442\u0438\u043b\u044f\u0442\u043e\u0440\u0430 {mode} \u043d\u0435 \u0454 \u0434\u0456\u0439\u0441\u043d\u0438\u043c. \u0414\u0456\u0439\u0441\u043d\u0438\u043c\u0438 \u0440\u0435\u0436\u0438\u043c\u0430\u043c\u0438 \u0432\u0435\u043d\u0442\u0438\u043b\u044f\u0442\u043e\u0440\u0430 \u0454: {modes}."
         },

homeassistant/components/climate/translations/zh-Hans.json

@@ -130,10 +130,10 @@
                     "name": "\u6446\u52a8\u6a21\u5f0f"
                 },
                 "target_temp_high": {
-                    "name": "\u63d0\u9ad8\u76ee\u6807\u6e29\u5ea6"
+                    "name": "\u76ee\u6807\u6e29\u5ea6\u4e0a\u9650"
                 },
                 "target_temp_low": {
-                    "name": "\u964d\u4f4e\u76ee\u6807\u6e29\u5ea6"
+                    "name": "\u76ee\u6807\u6e29\u5ea6\u4e0b\u9650"
                 },
                 "target_temp_step": {
                     "name": "\u76ee\u6807\u6e29\u5ea6\u6b65\u957f"
@@ -149,13 +149,13 @@
             "message": "\u63d0\u4f9b\u7684\u6e7f\u5ea6 {humidity} \u65e0\u6548\u3002\u53ef\u63a5\u53d7\u7684\u8303\u56f4\u662f {min_humidity} \u81f3 {max_humidity} \u3002"
         },
         "low_temp_higher_than_high_temp": {
-            "message": "\u76ee\u6807\u6e29\u5ea6\u4f4e\u503c\u4e0d\u80fd\u9ad8\u4e8e\u76ee\u6807\u6e29\u5ea6\u9ad8\u503c\u3002"
+            "message": "\u201c\u76ee\u6807\u6e29\u5ea6\u4e0b\u9650\u201d\u4e0d\u80fd\u9ad8\u4e8e\u201c\u76ee\u6807\u6e29\u5ea6\u4e0a\u9650\u201d\u3002"
         },
         "missing_target_temperature_entity_feature": {
-            "message": "\u8bbe\u7f6e\u6e29\u5ea6\u64cd\u4f5c\u65f6\u4f7f\u7528\u4e86\u76ee\u6807\u6e29\u5ea6\u53c2\u6570\uff0c\u4f46\u5b9e\u4f53\u4e0d\u652f\u6301\u3002"
+            "message": "\u8bbe\u7f6e\u6e29\u5ea6\u52a8\u4f5c\u4e0e\u201c\u76ee\u6807\u6e29\u5ea6\u201d\u53c2\u6570\u4e00\u8d77\u4f7f\u7528\uff0c\u4f46\u5b9e\u4f53\u4e0d\u652f\u6301\u5b83\u3002"
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "\u8bbe\u7f6e\u6e29\u5ea6\u64cd\u4f5c\u65f6\u4f7f\u7528\u4e86\u76ee\u6807\u6e29\u5ea6\u4f4e/\u9ad8\u53c2\u6570\uff0c\u4f46\u5b9e\u4f53\u4e0d\u652f\u6301\u3002"
+            "message": "\u8bbe\u7f6e\u6e29\u5ea6\u52a8\u4f5c\u4e0e\u201c\u76ee\u6807\u6e29\u5ea6\u4e0b\u9650/\u4e0a\u9650\u201d\u53c2\u6570\u4e00\u8d77\u4f7f\u7528\uff0c\u4f46\u5b9e\u4f53\u4e0d\u652f\u6301\u5b83\u3002"
         },
         "not_valid_fan_mode": {
             "message": "\u98ce\u6247\u6a21\u5f0f\u201c{mode}\u201d\u65e0\u6548\u3002\u6709\u6548\u98ce\u6247\u6a21\u5f0f\u6709\uff1a{modes} \u3002"
@@ -259,7 +259,7 @@
                 },
                 "target_temp_high": {
                     "description": "\u6700\u9ad8\u76ee\u6807\u6e29\u5ea6\u8bbe\u5b9a\u503c\u3002",
-                    "name": "\u9ad8\u76ee\u6807\u6e29\u5ea6"
+                    "name": "\u76ee\u6807\u6e29\u5ea6\u4e0a\u9650"
                 },
                 "target_temp_low": {
                     "description": "\u6700\u4f4e\u76ee\u6807\u6e29\u5ea6\u8bbe\u5b9a\u503c\u3002",

homeassistant/components/climate/translations/zh-Hant.json

@@ -149,13 +149,13 @@
             "message": "\u6240\u63d0\u4f9b\u7684\u6fd5\u5ea6 {humidity} \u7121\u6548\uff0c\u53ef\u63a5\u53d7\u7684\u7bc4\u570d\u70ba {min_humidity} \u81f3 {max_humidity}\u3002"
         },
         "low_temp_higher_than_high_temp": {
-            "message": "\u76ee\u6a19\u6eab\u5ea6\u4f4e\u4e0d\u80fd\u9ad8\u65bc\u76ee\u6a19\u6eab\u5ea6\u9ad8\u3002"
+            "message": "'\u4f4e\u76ee\u6a19\u6eab\u5ea6' \u4e0d\u80fd\u9ad8\u65bc '\u9ad8\u76ee\u6a19\u6eab\u5ea6'\u3002"
         },
         "missing_target_temperature_entity_feature": {
-            "message": "\u8a2d\u5b9a\u6eab\u5ea6\u64cd\u4f5c\u4f7f\u7528\u4e86\u76ee\u6a19\u6eab\u5ea6\u53c3\u6578\uff0c\u4f46\u8a72\u5be6\u9ad4\u4e0d\u652f\u6301\u6b64\u64cd\u4f5c\u3002"
+            "message": "\u8a2d\u5b9a\u6eab\u5ea6\u64cd\u4f5c\u4f7f\u7528\u4e86 '\u76ee\u6a19\u6eab\u5ea6' \u53c3\u6578\uff0c\u4f46\u8a72\u5be6\u9ad4\u4e0d\u652f\u6301\u6b64\u64cd\u4f5c\u3002"
         },
         "missing_target_temperature_range_entity_feature": {
-            "message": "\u8a2d\u5b9a\u6eab\u5ea6\u64cd\u4f5c\u4f7f\u7528\u4e86\u76ee\u6a19\u6eab\u5ea6\u4f4e/\u9ad8\u53c3\u6578\uff0c\u4f46\u8a72\u5be6\u9ad4\u4e0d\u652f\u6301\u6b64\u64cd\u4f5c\u3002"
+            "message": "\u8a2d\u5b9a\u6eab\u5ea6\u64cd\u4f5c\u4f7f\u7528\u4e86 '\u4f4e/\u9ad8\u76ee\u6a19\u6eab\u5ea6' \u53c3\u6578\uff0c\u4f46\u8a72\u5be6\u9ad4\u4e0d\u652f\u6301\u6b64\u64cd\u4f5c\u3002"
         },
         "not_valid_fan_mode": {
             "message": "\u9001\u98a8\u6a21\u5f0f {mode} \u7121\u6548\u3001\u6709\u6548\u7684\u9001\u98a8\u6a21\u5f0f\u70ba\uff1a{modes}.\u3002"

homeassistant/components/cloud/manifest.json

@@ -13,6 +13,6 @@
   "integration_type": "system",
   "iot_class": "cloud_push",
   "loggers": ["acme", "hass_nabucasa", "snitun"],
-  "requirements": ["hass-nabucasa==1.1.0"],
+  "requirements": ["hass-nabucasa==1.1.1"],
   "single_config_entry": true
 }

homeassistant/components/cloud/translations/pt.json

@@ -42,7 +42,7 @@
                 },
                 "step": {
                     "confirm_change_plan": {
-                        "description": "Actualiz\u00e1mos recentemente o nosso sistema de subscri\u00e7\u00e3o. Para continuar a utilizar o Home Assistant Cloud, tem de aprovar uma vez a altera\u00e7\u00e3o no PayPal.\n\nIsso leva 1 minuto e n\u00e3o aumentar\u00e1 o pre\u00e7o."
+                        "description": "Atualiz\u00e1mos recentemente o nosso sistema de subscri\u00e7\u00e3o. Para continuar a utilizar o Home Assistant Cloud, \u00e9 necess\u00e1rio aprovar uma vez a altera\u00e7\u00e3o no PayPal.\n\nIsto demora 1 minuto e n\u00e3o aumenta o pre\u00e7o."
                     }
                 }
             },

homeassistant/components/cloudflare/translations/sl.json

@@ -38,6 +38,7 @@
     },
     "services": {
         "update_records": {
+            "description": "Ro\u010dno spro\u017ei posodobitev zapisov Cloudflare.",
             "name": "Posodobi zapise"
         }
     }

homeassistant/components/coinbase/translations/es.json

@@ -1,7 +1,8 @@
 {
     "config": {
         "abort": {
-            "already_configured": "El dispositivo ya est\u00e1 configurado"
+            "already_configured": "El dispositivo ya est\u00e1 configurado",
+            "reauth_successful": "Credenciales actualizadas con \u00e9xito"
         },
         "error": {
             "cannot_connect": "No se pudo conectar",
@@ -11,6 +12,14 @@
             "unknown": "Error inesperado"
         },
         "step": {
+            "reauth_confirm": {
+                "data": {
+                    "api_key": "Clave API",
+                    "api_token": "Secreto API"
+                },
+                "description": "Parece que tu clave API actual de Coinbase corresponde a la API v2 obsoleta. Por favor, vuelve a configurarla con una nueva clave API creada para la API v3. Visita https://www.coinbase.com/developer-platform para crear nuevas credenciales para {account_name}.",
+                "title": "Actualizar las credenciales de la API de Coinbase"
+            },
             "user": {
                 "data": {
                     "api_key": "Clave API",

homeassistant/components/comelit/translations/pl.json

@@ -34,7 +34,8 @@
                 "state_attributes": {
                     "preset_mode": {
                         "state": {
-                            "automatic": "Auto"
+                            "automatic": "auto",
+                            "manual": "r\u0119czny"
                         }
                     }
                 }

homeassistant/components/comelit/translations/sl.json

@@ -26,5 +26,14 @@
                 }
             }
         }
+    },
+    "entity": {
+        "sensor": {
+            "zone_status": {
+                "state": {
+                    "open": "Odprto"
+                }
+            }
+        }
     }
 }