homeassistant 2025.9.0b0__py3-none-any.whl → 2025.9.0b1__py3-none-any.whl

homeassistant/components/knx/translations/lt.json

@@ -153,6 +153,251 @@
             }
         }
     },
+    "config_panel": {
+        "entities": {
+            "create": {
+                "_": {
+                    "entity": {
+                        "description": "Specifiniai Home Assistant nustatymai.",
+                        "device_description": "\u012erenginys leid\u017eia grupuoti kelis objektus. Pasirinkite \u012frengin\u012f, kuriam priklauso \u0161is objektas, arba sukurkite nauj\u0105.",
+                        "entity_category_description": "Ne pirminio objekto klasifikacija. Standartiniam elgesiui palikite tu\u0161\u010di\u0105.",
+                        "entity_category_title": "Objekto kategorija",
+                        "entity_description": "Pasirinktinai, jei pasirinktas \u012frenginys, kitu atveju privaloma. Jei objektas priskirtas \u012frenginiui, kaip prefiksas naudojamas \u012frenginio pavadinimas.",
+                        "entity_label": "Subjekto pavadinimas",
+                        "name_description": "Apibr\u0117\u017ekite, kaip objektas tur\u0117t\u0173 b\u016bti pavadintas programoje Home Assistant.",
+                        "name_title": "\u012erenginio ir subjekto pavadinimas",
+                        "title": "Objekto konfig\u016bracija"
+                    },
+                    "knx": {
+                        "knx_group_address": {
+                            "dpt": "Duomen\u0173 ta\u0161ko tipas",
+                            "passive_addresses": "Pasyv\u016bs adresai",
+                            "send_address": "Si\u0173sti adres\u0105",
+                            "state_address": "B\u016bsenos adresas",
+                            "valid_dpts": "Galiojantys DPT"
+                        },
+                        "sync_state": {
+                            "description": "Aktyviai pra\u0161yti b\u016bsenos atnaujinim\u0173 i\u0161 KNX magistral\u0117s, kad b\u016bt\u0173 gauti b\u016bsenos adresai.",
+                            "options": {
+                                "every": "Suplanuota kas",
+                                "expire": "Galioja po paskutinio vert\u0117s atnaujinimo"
+                            },
+                            "title": "B\u016bsenos atnaujinimo programa"
+                        },
+                        "title": "KNX konfig\u016bracija"
+                    }
+                },
+                "binary_sensor": {
+                    "description": "Tik skaitymui skirtas dvejetaini\u0173 duomen\u0173 ta\u0161k\u0173 objektas. Lang\u0173 ar dur\u0173 b\u016bsenos ir kt.",
+                    "knx": {
+                        "context_timeout": {
+                            "description": "Laikas sekund\u0117mis tarp keli\u0173 identi\u0161k\u0173 telegram\u0173 apkrov\u0173 b\u016bt\u0173 \u012fskai\u010diuotas \u012f vidin\u012f skaitikl\u012f. Tai galima naudoti norint automatizuoti kelis mygtuko paspaudimus. '0', jei norite i\u0161jungti \u0161i\u0105 funkcij\u0105.",
+                            "label": "Konteksto skirtasis laikas"
+                        },
+                        "ignore_internal_state": {
+                            "description": "\u012era\u0161ykite kiekvien\u0105 atnaujinim\u0105 \u012f b\u016bsenos ma\u0161in\u0105, net jei duomenys yra tie patys.",
+                            "label": "Priverstinis atnaujinimas"
+                        },
+                        "invert": {
+                            "description": "Prie\u0161 apdorojim\u0105 apverskite nauding\u0105j\u0105 apkrov\u0105.",
+                            "label": "Apversti"
+                        },
+                        "reset_after": {
+                            "description": "Po nurodyt\u0173 sekund\u017ei\u0173 gr\u0105\u017einkite \u012f \"i\u0161jungimo\u201c b\u016bsen\u0105.",
+                            "label": "Atstatyti po"
+                        },
+                        "section_advanced_options": {
+                            "description": "Dvejetainio jutiklio b\u016bsenos savyb\u0117s.",
+                            "title": "B\u016bsenos savyb\u0117s"
+                        },
+                        "section_binary_sensor": {
+                            "description": "DPT 1 grup\u0117s adresai, vaizduojantys dvejetaines b\u016bsenas.",
+                            "title": "Dvejetainis jutiklis"
+                        }
+                    }
+                },
+                "cover": {
+                    "description": "KNX dengimo platforma naudojama kaip s\u0105saja su \u017ealiuzi\u0173 pavaromis.",
+                    "knx": {
+                        "ga_angle": {
+                            "label": "Pakreipimo kampas"
+                        },
+                        "ga_position_set": {
+                            "label": "Nustatykite pad\u0117t\u012f"
+                        },
+                        "ga_position_state": {
+                            "label": "Dabartin\u0117 pad\u0117tis"
+                        },
+                        "ga_step": {
+                            "label": "\u017dingsninis jud\u0117jimas"
+                        },
+                        "ga_stop": {
+                            "label": "Sustabdyti"
+                        },
+                        "ga_up_down": {
+                            "label": "Atidaryti/U\u017edaryti"
+                        },
+                        "invert_angle": {
+                            "description": "Prie\u0161 apdorojant, apverskite nauding\u0105j\u0105 apkrov\u0105. \u012ejunkite, jei KNX prane\u0161a apie 0 % kaip visi\u0161kai u\u017edaryt\u0105.",
+                            "label": "Apversti"
+                        },
+                        "invert_position": {
+                            "description": "Prie\u0161 apdorojant, apverskite nauding\u0105j\u0105 apkrov\u0105. \u012ejunkite, jei KNX prane\u0161a apie 0 % kaip visi\u0161kai u\u017edaryt\u0105.",
+                            "label": "Apversti"
+                        },
+                        "invert_updown": {
+                            "description": "Numatytoji pad\u0117tis yra VIR\u0160US (0), skirta dangteliui atidaryti, ir \u017dEMYN (1), skirta dangteliui u\u017edaryti. \u012ejunkite \u0161i\u0105 pad\u0117t\u012f, kad apverstum\u0117te atidarymo/u\u017edarymo komandas i\u0161/\u012f j\u016bs\u0173 KNX pavar\u0105.",
+                            "label": "Apversti"
+                        },
+                        "section_binary_control": {
+                            "description": "DPT 1 grup\u0117s adresai sukelia visi\u0161k\u0105 jud\u0117jim\u0105.",
+                            "title": "Atidarymo/u\u017edarymo valdymas"
+                        },
+                        "section_stop_control": {
+                            "description": "DPT 1 grup\u0117s adresai, skirti jud\u0117jimui sustabdyti.",
+                            "title": "Sustabdyti"
+                        },
+                        "section_tilt_control": {
+                            "description": "DPT 5 grup\u0117s adresai, skirti skersini\u0173 pasvirimo kampui.",
+                            "title": "Pakreipti"
+                        },
+                        "section_travel_time": {
+                            "description": "Naudojamas tarpin\u0117ms dang\u010dio pad\u0117tims apskai\u010diuoti kelion\u0117s metu.",
+                            "title": "Kelion\u0117s laikas"
+                        },
+                        "travelling_time_down": {
+                            "description": "Laikas sekund\u0117mis, per kur\u012f dangtis turi visi\u0161kai u\u017esidaryti.",
+                            "label": "Kelion\u0117s laikas iki u\u017edarymo"
+                        },
+                        "travelling_time_up": {
+                            "description": "Laikas sekund\u0117mis, per kur\u012f dangtis turi visi\u0161kai atsidaryti.",
+                            "label": "Kelion\u0117s laikas iki atidarymo"
+                        }
+                    }
+                },
+                "header": "Sukurti nauj\u0105 objekt\u0105",
+                "light": {
+                    "description": "KNX ap\u0161vietimo platforma naudojama kaip s\u0105saja su pritemdymo pavaromis, LED valdikliais, DALI \u0161liuzais ir pana\u0161iais \u012frenginiais.",
+                    "knx": {
+                        "color": {
+                            "description": "Valdykite \u0161viesos spalv\u0105.",
+                            "ga_blue_brightness": {
+                                "label": "M\u0117lynos spalvos ry\u0161kumas"
+                            },
+                            "ga_blue_switch": {
+                                "label": "M\u0117lynas jungiklis"
+                            },
+                            "ga_color": {
+                                "label": "Spalva",
+                                "options": {
+                                    "232_600": "RGB",
+                                    "242_600": "XYY",
+                                    "251_600": "RGBW"
+                                }
+                            },
+                            "ga_green_brightness": {
+                                "label": "\u017dalios spalvos ry\u0161kumas"
+                            },
+                            "ga_green_switch": {
+                                "label": "\u017dalias jungiklis"
+                            },
+                            "ga_hue": {
+                                "description": "Valdo \u0161viesos atspalv\u012f.",
+                                "label": "Atspalvis"
+                            },
+                            "ga_red_brightness": {
+                                "label": "Raudonos spalvos ry\u0161kumas"
+                            },
+                            "ga_red_switch": {
+                                "label": "Raudonas jungiklis"
+                            },
+                            "ga_saturation": {
+                                "description": "Valdo \u0161viesos sodrum\u0105.",
+                                "label": "Sotumas"
+                            },
+                            "ga_white_brightness": {
+                                "label": "Baltas ry\u0161kumas"
+                            },
+                            "ga_white_switch": {
+                                "label": "Baltas jungiklis"
+                            },
+                            "options": {
+                                "hsv_addresses": {
+                                    "description": "Atspalvis, sodrumas ir ry\u0161kumas naudojant atskirus grupinius adresus.",
+                                    "label": "HSV"
+                                },
+                                "individual_addresses": {
+                                    "description": "RGB(W) naudojant individualius b\u016bsenos ir ry\u0161kumo grupi\u0173 adresus.",
+                                    "label": "Individual\u016bs adresai"
+                                },
+                                "single_address": {
+                                    "description": "RGB, RGBW arba XYY spalvos, valdomos vienu grup\u0117s adresu.",
+                                    "label": "Vienas adresas"
+                                }
+                            },
+                            "section_blue": {
+                                "description": "Valdo \u0161viesos m\u0117lynos spalvos komponent\u0105. B\u016btinas ry\u0161kumo grup\u0117s adresas.",
+                                "title": "M\u0117lyna"
+                            },
+                            "section_green": {
+                                "description": "Valdo \u017eali\u0105 \u0161viesos spalvos komponent\u0105. B\u016btinas ry\u0161kumo grup\u0117s adresas.",
+                                "title": "\u017dalia"
+                            },
+                            "section_red": {
+                                "description": "Valdo \u0161viesos raudonos spalvos komponent\u0105. B\u016btinas ry\u0161kumo grup\u0117s adresas.",
+                                "title": "Raudona"
+                            },
+                            "section_white": {
+                                "description": "Valdo \u0161viesos baltos spalvos komponent\u0105. B\u016btinas ry\u0161kumo grup\u0117s adresas.",
+                                "title": "Balta"
+                            },
+                            "title": "Spalva"
+                        },
+                        "color_temp_max": {
+                            "label": "\u0160al\u010diausia \u012fmanoma spalv\u0173 temperat\u016bra"
+                        },
+                        "color_temp_min": {
+                            "label": "\u0160il\u010diausia \u012fmanoma spalv\u0173 temperat\u016bra"
+                        },
+                        "ga_brightness": {
+                            "label": "Ry\u0161kumas"
+                        },
+                        "ga_color_temp": {
+                            "label": "Spalvos temperat\u016bra",
+                            "options": {
+                                "5_001": "Procentas",
+                                "7_600": "Kelvinas",
+                                "9": "2 bait\u0173 slankiojo kablelio"
+                            }
+                        },
+                        "ga_switch": {
+                            "label": "Jungiklis"
+                        },
+                        "section_brightness": {
+                            "description": "Valdykite \u0161viesos ry\u0161kum\u0105.",
+                            "title": "Ry\u0161kumas"
+                        },
+                        "section_color_temp": {
+                            "description": "Valdykite \u0161viesos spalvos temperat\u016br\u0105.",
+                            "title": "Spalvos temperat\u016bra"
+                        },
+                        "section_switch": {
+                            "description": "\u012ejunkite / i\u0161junkite \u0161vies\u0105.",
+                            "title": "Jungiklis"
+                        }
+                    }
+                },
+                "switch": {
+                    "description": "KNX jungikli\u0173 platforma naudojama kaip s\u0105saja su perjungimo pavaromis.",
+                    "knx": {
+                        "ga_switch": {
+                            "description": "Grupinis adresas \u012frenginiui \u012fjungti / i\u0161jungti."
+                        }
+                    }
+                }
+            }
+        }
+    },
     "device_automation": {
         "extra_fields": {
             "destination": "Grupi\u0173 adresai",

homeassistant/components/knx/translations/pt.json

@@ -153,6 +153,276 @@
             }
         }
     },
+    "config_panel": {
+        "entities": {
+            "create": {
+                "_": {
+                    "entity": {
+                        "description": "Configura\u00e7\u00f5es espec\u00edficas do Home Assistant.",
+                        "device_description": "Um dispositivo permite agrupar v\u00e1rias entidades. Selecione o dispositivo a que esta entidade pertence ou crie um novo.",
+                        "entity_category_description": "Classifica\u00e7\u00e3o de uma entidade n\u00e3o prim\u00e1ria. Deixar em branco para um comportamento padr\u00e3o.",
+                        "entity_category_title": "Categoria da entidade",
+                        "entity_description": "Opcional se um dispositivo estiver selecionado; caso contr\u00e1rio, obrigat\u00f3rio. Se a entidade estiver atribu\u00edda a um dispositivo, o nome do dispositivo \u00e9 utilizado como prefixo.",
+                        "entity_label": "Nome da entidade",
+                        "name_description": "Definir como deve ser dado o nome \u00e0 entidade no Home Assistant.",
+                        "name_title": "Nome do dispositivo e da entidade",
+                        "title": "Configura\u00e7\u00e3o da entidade"
+                    },
+                    "knx": {
+                        "knx_group_address": {
+                            "dpt": "Tipo de ponto de dados",
+                            "passive_addresses": "Endere\u00e7os passivos",
+                            "send_address": "Enviar endere\u00e7o",
+                            "state_address": "Endere\u00e7o do estado",
+                            "valid_dpts": "DPTs v\u00e1lidos"
+                        },
+                        "sync_state": {
+                            "description": "Solicitar ativamente atualiza\u00e7\u00f5es de estado do bus KNX para endere\u00e7os de estado.",
+                            "options": {
+                                "every": "Agendado a cada",
+                                "expire": "Expirar ap\u00f3s a \u00faltima atualiza\u00e7\u00e3o de valor",
+                                "false": "Nunca",
+                                "init": "Uma vez quando a liga\u00e7\u00e3o \u00e9 estabelecida",
+                                "true": "Utilizar a integra\u00e7\u00e3o predefinida"
+                            },
+                            "strategy": "Estrat\u00e9gia",
+                            "title": "Atualizador de estado"
+                        },
+                        "title": "Configura\u00e7\u00e3o KNX"
+                    }
+                },
+                "binary_sensor": {
+                    "description": "Entidade s\u00f3 de leitura para pontos de dados bin\u00e1rios. Estados de janelas ou portas, etc.",
+                    "knx": {
+                        "context_timeout": {
+                            "description": "O tempo, em segundos, entre v\u00e1rios payloads de telegramas id\u00eanticos contaria para um contador interno. Isto pode ser utilizado para automatizar m\u00faltiplos cliques num bot\u00e3o. `0` para desativar esta fun\u00e7\u00e3o.",
+                            "label": "Tempo limite do contexto"
+                        },
+                        "ignore_internal_state": {
+                            "description": "Escreva cada atualiza\u00e7\u00e3o na m\u00e1quina de estados, mesmo que os dados sejam os mesmos.",
+                            "label": "For\u00e7ar atualiza\u00e7\u00e3o"
+                        },
+                        "invert": {
+                            "description": "Inverter o payload antes do processamento.",
+                            "label": "Inverter"
+                        },
+                        "reset_after": {
+                            "description": "Repor o estado \"desligado\" ap\u00f3s os segundos especificados.",
+                            "label": "Repor ap\u00f3s"
+                        },
+                        "section_advanced_options": {
+                            "description": "Propriedades do estado do sensor bin\u00e1rio.",
+                            "title": "Propriedades do estado"
+                        },
+                        "section_binary_sensor": {
+                            "description": "Endere\u00e7os do grupo DPT 1 que representam estados bin\u00e1rios.",
+                            "title": "Sensor bin\u00e1rio"
+                        }
+                    }
+                },
+                "cover": {
+                    "description": "A plataforma de cobertura KNX \u00e9 utilizada como interface para os atuadores de persianas.",
+                    "knx": {
+                        "ga_angle": {
+                            "label": "\u00c2ngulo de inclina\u00e7\u00e3o"
+                        },
+                        "ga_position_set": {
+                            "label": "Define posi\u00e7\u00e3o"
+                        },
+                        "ga_position_state": {
+                            "label": "Posi\u00e7\u00e3o atual"
+                        },
+                        "ga_step": {
+                            "label": "Movimento por passos"
+                        },
+                        "ga_stop": {
+                            "label": "Parar"
+                        },
+                        "ga_up_down": {
+                            "label": "Abrir/Fechar"
+                        },
+                        "invert_angle": {
+                            "description": "Inverter o payload antes do processamento. Ativar se o KNX reportar 0% como totalmente fechado.",
+                            "label": "Inverter"
+                        },
+                        "invert_position": {
+                            "description": "Inverter o payload antes do processamento. Ativar se o KNX reportar 0% como totalmente fechado.",
+                            "label": "Inverter"
+                        },
+                        "invert_updown": {
+                            "description": "A predefini\u00e7\u00e3o \u00e9 UP (0) para abrir uma tampa e DOWN (1) para fechar uma tampa. Ative esta op\u00e7\u00e3o para inverter os comandos de abrir/fechar de/para o seu atuador KNX.",
+                            "label": "Inverter"
+                        },
+                        "section_binary_control": {
+                            "description": "Endere\u00e7os do grupo DPT 1 que acionam o movimento total.",
+                            "title": "Controlo de Abrir/Fechar"
+                        },
+                        "section_position_control": {
+                            "description": "Endere\u00e7os de grupo DPT 5 para posi\u00e7\u00e3o de cobertura.",
+                            "title": "Posi\u00e7\u00e3o"
+                        },
+                        "section_stop_control": {
+                            "description": "Endere\u00e7os de grupo DPT 1 para parar o movimento.",
+                            "title": "Parar"
+                        },
+                        "section_tilt_control": {
+                            "description": "Endere\u00e7os do grupo DPT 5 para o \u00e2ngulo de inclina\u00e7\u00e3o das l\u00e2minas.",
+                            "title": "Inclina\u00e7\u00e3o"
+                        },
+                        "section_travel_time": {
+                            "description": "Utilizado para calcular as posi\u00e7\u00f5es interm\u00e9dias da cobertura durante a desloca\u00e7\u00e3o.",
+                            "title": "Tempo de desloca\u00e7\u00e3o"
+                        },
+                        "travelling_time_down": {
+                            "description": "Tempo que a tampa precisa para fechar completamente, em segundos.",
+                            "label": "Tempo de desloca\u00e7\u00e3o para o encerramento"
+                        },
+                        "travelling_time_up": {
+                            "description": "Tempo que a cobertura precisa para abrir completamente, em segundos.",
+                            "label": "Tempo de desloca\u00e7\u00e3o para a abertura"
+                        }
+                    }
+                },
+                "header": "Criar nova entidade",
+                "light": {
+                    "description": "A plataforma de ilumina\u00e7\u00e3o KNX \u00e9 utilizada como interface para atuadores de regula\u00e7\u00e3o de fluxo luminoso, controladores LED, gateways DALI e similares.",
+                    "knx": {
+                        "color": {
+                            "description": "Controlar a cor da luz.",
+                            "ga_blue_brightness": {
+                                "label": "Brilho azul"
+                            },
+                            "ga_blue_switch": {
+                                "label": "Interruptor azul"
+                            },
+                            "ga_color": {
+                                "label": "Cor",
+                                "options": {
+                                    "232_600": "RGB",
+                                    "242_600": "XYY",
+                                    "251_600": "RGBW"
+                                }
+                            },
+                            "ga_green_brightness": {
+                                "label": "Brilho verde"
+                            },
+                            "ga_green_switch": {
+                                "label": "Interruptor verde"
+                            },
+                            "ga_hue": {
+                                "description": "Controla a tonalidade da luz.",
+                                "label": "Matiz"
+                            },
+                            "ga_red_brightness": {
+                                "label": "Brilho vermelho"
+                            },
+                            "ga_red_switch": {
+                                "label": "Interruptor vermelho"
+                            },
+                            "ga_saturation": {
+                                "description": "Controla a satura\u00e7\u00e3o da luz.",
+                                "label": "Satura\u00e7\u00e3o"
+                            },
+                            "ga_white_brightness": {
+                                "label": "Brilho branco"
+                            },
+                            "ga_white_switch": {
+                                "label": "Interruptor branco"
+                            },
+                            "options": {
+                                "hsv_addresses": {
+                                    "description": "Matiz, satura\u00e7\u00e3o e brilho utilizando endere\u00e7os de grupos individuais.",
+                                    "label": "HSV"
+                                },
+                                "individual_addresses": {
+                                    "description": "RGB(W) utilizando endere\u00e7os individuais de estado e de grupo de luminosidade.",
+                                    "label": "Endere\u00e7os individuais"
+                                },
+                                "single_address": {
+                                    "description": "Cor RGB, RGBW ou XYY controlada por um \u00fanico endere\u00e7o de grupo.",
+                                    "label": "Endere\u00e7o \u00fanico"
+                                }
+                            },
+                            "section_blue": {
+                                "description": "Controla o componente de cor azul da luz. \u00c9 necess\u00e1rio o endere\u00e7o do grupo de brilho.",
+                                "title": "Azul"
+                            },
+                            "section_green": {
+                                "description": "Controla o componente de cor verde da luz. \u00c9 necess\u00e1rio o endere\u00e7o do grupo de brilho.",
+                                "title": "Verde"
+                            },
+                            "section_red": {
+                                "description": "Controla o componente de cor vermelha da luz. \u00c9 necess\u00e1rio o endere\u00e7o do grupo de brilho.",
+                                "title": "Vermelho"
+                            },
+                            "section_white": {
+                                "description": "Controla o componente de cor branca da luz. \u00c9 necess\u00e1rio o endere\u00e7o do grupo de brilho.",
+                                "title": "Branco"
+                            },
+                            "title": "Cor"
+                        },
+                        "color_temp_max": {
+                            "label": "Temperatura de cor mais fria poss\u00edvel"
+                        },
+                        "color_temp_min": {
+                            "label": "Temperatura de cor mais quente poss\u00edvel"
+                        },
+                        "ga_brightness": {
+                            "label": "Brilho"
+                        },
+                        "ga_color_temp": {
+                            "label": "Temperatura da cor",
+                            "options": {
+                                "5_001": "Porcento",
+                                "7_600": "Kelvin",
+                                "9": "ponto flutuante de 2 bytes"
+                            }
+                        },
+                        "ga_switch": {
+                            "label": "Interruptor"
+                        },
+                        "section_brightness": {
+                            "description": "Controlar o brilho da luz.",
+                            "title": "Brilho"
+                        },
+                        "section_color_temp": {
+                            "description": "Controlar a temperatura da cor da luz.",
+                            "title": "Temperatura da cor"
+                        },
+                        "section_switch": {
+                            "description": "Ligar/desligar a luz.",
+                            "title": "Interruptor"
+                        }
+                    }
+                },
+                "switch": {
+                    "description": "A plataforma de comuta\u00e7\u00e3o KNX \u00e9 utilizada como interface para os atuadores de comuta\u00e7\u00e3o.",
+                    "knx": {
+                        "ga_switch": {
+                            "description": "Endere\u00e7o do grupo para ligar/desligar o dispositivo.",
+                            "label": "Interruptor"
+                        },
+                        "invert": {
+                            "description": "Inverter os payloads antes de os processar ou enviar.",
+                            "label": "Inverter"
+                        },
+                        "respond_to_read": {
+                            "description": "Responde aos telegramas GroupValueRead recebidos para o endere\u00e7o de envio configurado.",
+                            "label": "Responder \u00e0 leitura"
+                        },
+                        "section_switch": {
+                            "description": "Endere\u00e7os do grupo DPT 1 que controlam a fun\u00e7\u00e3o de comuta\u00e7\u00e3o.",
+                            "title": "Comuta\u00e7\u00e3o"
+                        }
+                    }
+                },
+                "type_selection": {
+                    "header": "Criar entidade KNX",
+                    "title": "Selecionar o tipo de entidade"
+                }
+            }
+        }
+    },
     "device_automation": {
         "extra_fields": {
             "destination": "Endere\u00e7os de grupo",

homeassistant/components/lg_thinq/translations/lt.json

@@ -1038,6 +1038,9 @@
             }
         },
         "switch": {
+            "air_clean_operation_mode": {
+                "name": "Oro valymas"
+            },
             "auto_mode": {
                 "name": "Automatinis re\u017eimas"
             },

homeassistant/components/lg_thinq/translations/pt.json

@@ -74,6 +74,7 @@
                             "auto": "Auto",
                             "high": "Alto",
                             "low": "Baixo",
+                            "medium": "M\u00e9dio",
                             "power": "Ligar/Desligar",
                             "slow": "Lento"
                         }
@@ -1045,6 +1046,9 @@
             }
         },
         "switch": {
+            "air_clean_operation_mode": {
+                "name": "Purificar ar"
+            },
             "auto_mode": {
                 "name": "Modo Auto"
             },

homeassistant/components/lock/translations/pl.json

@@ -25,6 +25,7 @@
                 "locked": "zamkni\u0119to",
                 "locking": "zamykanie",
                 "open": "otwarto",
+                "opening": "otwieranie",
                 "unlocked": "otwarto",
                 "unlocking": "otwieranie"
             },

homeassistant/components/logbook/translations/ko.json

@@ -21,5 +21,6 @@
             },
             "name": "\ub85c\uadf8"
         }
-    }
+    },
+    "title": "\ub85c\uadf8\ubd81"
 }

homeassistant/components/lyric/translations/sk.json

@@ -1,6 +1,6 @@
 {
     "application_credentials": {
-        "description": "Aby ste sa mohli prihl\u00e1si\u0165 do aplik\u00e1cie Honeywell Lyric, integr\u00e1cia vy\u017eaduje klientske ID a tajn\u00e9 \u010d\u00edslo. Ak ich chcete z\u00edska\u0165, postupujte pod\u013ea nasleduj\u00facich krokov. \n\n1. Prejdite na [Honeywell Lyric Developer Apps Dashboard]({developer_dashboard_url}). \n1. Zaregistrujte si v\u00fdvoj\u00e1rske konto, ak ho e\u0161te nem\u00e1te. Ide o \u00fa\u010det oddelen\u00fd od v\u00e1\u0161ho \u00fa\u010dtu spolo\u010dnosti Honeywell. \n1. Prihl\u00e1ste sa pomocou svojho v\u00fdvoj\u00e1rskeho konta Honeywell Lyric. \n1. Prihl\u00e1ste sa do svojho v\u00fdvoj\u00e1rskeho konta Honeywell Lyric. Prejdite do \u010dasti **My Apps** (Moje aplik\u00e1cie**). \n1. Prejdite do \u010dasti **My Apps** (Moje aplik\u00e1cie). Stla\u010dte tla\u010didlo **Vytvori\u0165 nov\u00fa aplik\u00e1ciu**. \n1. Stla\u010dte tla\u010didlo **Vytvori\u0165 nov\u00fa aplik\u00e1ciu**. Aplik\u00e1ciu pomenujte pod\u013ea vlastn\u00e9ho v\u00fdberu. \n1. Zadajte n\u00e1zov aplik\u00e1cie. Nastavte **Callback URL** na `{redirect_url}`. \n1. Ulo\u017ete zmeny. \n1. Skop\u00edrujte **K\u013e\u00fa\u010d spotrebite\u013ea** a vlo\u017ete ho sem ako **ID klienta**, potom skop\u00edrujte **Tajomstvo spotrebite\u013ea** a vlo\u017ete ho sem ako **Tajomstvo klienta**."
+        "description": "Aby ste sa mohli prihl\u00e1si\u0165 do aplik\u00e1cie Honeywell Lyric, integr\u00e1cia vy\u017eaduje klientske ID a tajn\u00e9 \u010d\u00edslo. Ak ich chcete z\u00edska\u0165, postupujte pod\u013ea nasleduj\u00facich krokov. \n\n1. Prejdite na [Honeywell Lyric Developer Apps Dashboard]({developer_dashboard_url}). \n1. Zaregistrujte si v\u00fdvoj\u00e1rske konto, ak ho e\u0161te nem\u00e1te. Ide o \u00fa\u010det oddelen\u00fd od v\u00e1\u0161ho \u00fa\u010dtu spolo\u010dnosti Honeywell. \n1. Prihl\u00e1ste sa pomocou svojho v\u00fdvoj\u00e1rskeho konta Honeywell Lyric. \n1. Prihl\u00e1ste sa do svojho v\u00fdvoj\u00e1rskeho konta Honeywell Lyric. Prejdite do \u010dasti **Moje aplik\u00e1cie**. \n1. Prejdite do \u010dasti **Moje aplik\u00e1cie**. Stla\u010dte tla\u010didlo **Vytvori\u0165 nov\u00fa aplik\u00e1ciu**. \n1. Stla\u010dte tla\u010didlo **Vytvori\u0165 nov\u00fa aplik\u00e1ciu**. Aplik\u00e1ciu pomenujte pod\u013ea vlastn\u00e9ho v\u00fdberu. \n1. Zadajte n\u00e1zov aplik\u00e1cie. Nastavte **Callback URL** na `{redirect_url}`. \n1. Ulo\u017ete zmeny. \n1. Skop\u00edrujte **K\u013e\u00fa\u010d spotrebite\u013ea** a vlo\u017ete ho sem ako **ID klienta**, potom skop\u00edrujte **Tajomstvo spotrebite\u013ea** a vlo\u017ete ho sem ako **Tajomstvo klienta**."
     },
     "config": {
         "abort": {

homeassistant/components/mastodon/__init__.py

@@ -2,7 +2,14 @@
 
 from __future__ import annotations
 
-from mastodon.Mastodon import Account, Instance, InstanceV2, Mastodon, MastodonError
+from mastodon.Mastodon import (
+    Account,
+    Instance,
+    InstanceV2,
+    Mastodon,
+    MastodonError,
+    MastodonNotFoundError,
+)
 
 from homeassistant.const import (
     CONF_ACCESS_TOKEN,
@@ -105,7 +112,11 @@ def setup_mastodon(
         entry.data[CONF_ACCESS_TOKEN],
     )
 
-    instance = client.instance()
+    try:
+        instance = client.instance_v2()
+    except MastodonNotFoundError:
+        instance = client.instance_v1()
+
     account = client.account_verify_credentials()
 
     return client, instance, account

homeassistant/components/mastodon/config_flow.py

@@ -7,7 +7,9 @@ from typing import Any
 from mastodon.Mastodon import (
     Account,
     Instance,
+    InstanceV2,
     MastodonNetworkError,
+    MastodonNotFoundError,
     MastodonUnauthorizedError,
 )
 import voluptuous as vol
@@ -61,7 +63,7 @@ class MastodonConfigFlow(ConfigFlow, domain=DOMAIN):
         client_secret: str,
         access_token: str,
     ) -> tuple[
-        Instance | None,
+        InstanceV2 | Instance | None,
         Account | None,
         dict[str, str],
     ]:
@@ -73,7 +75,10 @@ class MastodonConfigFlow(ConfigFlow, domain=DOMAIN):
                 client_secret,
                 access_token,
             )
-            instance = client.instance()
+            try:
+                instance = client.instance_v2()
+            except MastodonNotFoundError:
+                instance = client.instance_v1()
             account = client.account_verify_credentials()
 
         except MastodonNetworkError: