homeassistant 2025.8.3__py3-none-any.whl → 2025.9.0b1__py3-none-any.whl

homeassistant/components/husqvarna_automower_ble/translations/en.json

@@ -4,18 +4,49 @@
             "already_configured": "Device is already configured",
             "cannot_connect": "Failed to connect",
             "no_devices_found": "Ensure the mower is in pairing mode and try again. It can take a few attempts.",
+            "not_allowed": "Unable to read data from the mower, this usually means it is not paired",
+            "reauth_successful": "Re-authentication was successful",
             "unknown": "Unexpected error"
         },
+        "error": {
+            "cannot_connect": "Failed to connect",
+            "invalid_auth": "Unable to pair with device, ensure the PIN is correct and the mower is in pairing mode",
+            "invalid_pin": "The PIN must be a number"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Do you want to set up {name}? Make sure the mower is in pairing mode"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "Mower PIN"
+                },
+                "data_description": {
+                    "pin": "The PIN used to secure the mower"
+                },
+                "description": "Do you want to set up {name}?\nMake sure the mower is in pairing mode."
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "Mower PIN"
+                },
+                "data_description": {
+                    "pin": "The PIN used to secure the mower"
+                },
+                "description": "Please confirm the PIN for {name}."
             },
             "user": {
                 "data": {
-                    "address": "Device BLE address"
+                    "address": "Device BLE address",
+                    "pin": "Mower PIN"
+                },
+                "data_description": {
+                    "pin": "The PIN used to secure the mower"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "PIN is required for {domain_name}"
+        }
     }
 }

homeassistant/components/husqvarna_automower_ble/translations/es.json

@@ -8,9 +8,6 @@
         },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "\u00bfQuieres configurar {name}? Aseg\u00farate de que la cortadora de c\u00e9sped est\u00e9 en modo de emparejamiento"
-            },
             "user": {
                 "data": {
                     "address": "Direcci\u00f3n BLE del dispositivo"

homeassistant/components/husqvarna_automower_ble/translations/et.json

@@ -4,18 +4,49 @@
             "already_configured": "Seade on juba h\u00e4\u00e4lestatud",
             "cannot_connect": "\u00dchendamine nurjus",
             "no_devices_found": "Veendu, et niiduk on sidumisre\u017eiimis ja proovi uuesti. See v\u00f5ib v\u00f5tta paar katset.",
+            "not_allowed": "Niiduki andmete lugemine eba\u00f5nnestus, mis tavaliselt t\u00e4hendab, et see pole \u00fchendatud",
+            "reauth_successful": "Taastuvastamine \u00f5nnestus",
             "unknown": "Ootamatu t\u00f5rge"
         },
+        "error": {
+            "cannot_connect": "\u00dchendamine nurjus",
+            "invalid_auth": "Seadmega ei saa siduda, veendu, et PIN-kood on \u00f5ige ja niiduk on sidumisre\u017eiimis",
+            "invalid_pin": "PIN-kood peab olema number"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Kas soovid seadistada? {name}? Veendu, et niiduk oleks sidumisre\u017eiimis"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "Niiduki PIN-kood"
+                },
+                "data_description": {
+                    "pin": "Niiduki turvamiseks kasutatav PIN-kood"
+                },
+                "description": "Kas soovid seadistada? {name}? \nVeendu, et niiduk oleks sidumisre\u017eiimis"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "Niiduki PIN-kood"
+                },
+                "data_description": {
+                    "pin": "Niiduki turvamiseks kasutatav PIN-kood"
+                },
+                "description": "Kinnita kasutaja {name} PIN-kood."
             },
             "user": {
                 "data": {
-                    "address": "Seadme BLE aadress"
+                    "address": "Seadme BLE aadress",
+                    "pin": "Niiduki PIN-kood"
+                },
+                "data_description": {
+                    "pin": "Niiduki turvamiseks kasutatav PIN-kood"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "{domain_name} jaoks on vaja PIN-koodi"
+        }
     }
 }

homeassistant/components/husqvarna_automower_ble/translations/ga.json

@@ -8,9 +8,6 @@
         },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Ar mhaith leat {name} a chur ar bun? Cinntigh go bhfuil an meais\u00edn gearrtha i m\u00f3d p\u00e9ire\u00e1la"
-            },
             "user": {
                 "data": {
                     "address": "Seoladh BLE na gl\u00e9is"

homeassistant/components/husqvarna_automower_ble/translations/hu.json

@@ -8,9 +8,6 @@
         },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Be k\u00edv\u00e1nja \u00e1ll\u00edtani a(z) {name} eszk\u00f6zt? Gy\u0151z\u0151dj\u00f6n meg r\u00f3la, hogy a f\u0171ny\u00edr\u00f3 p\u00e1ros\u00edt\u00e1si m\u00f3dba van kapcsolva"
-            },
             "user": {
                 "data": {
                     "address": "Eszk\u00f6z BLE-c\u00edme"

homeassistant/components/husqvarna_automower_ble/translations/it.json

@@ -6,16 +6,43 @@
             "no_devices_found": "Assicurati che il tosaerba sia in modalit\u00e0 di associazione e riprova. Potrebbero essere necessari alcuni tentativi.",
             "unknown": "Errore imprevisto"
         },
+        "error": {
+            "invalid_pin": "Il PIN deve essere un numero"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Vuoi configurare {name}? Assicurati che il tosaerba sia in modalit\u00e0 di associazione"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "PIN del tosaerba"
+                },
+                "data_description": {
+                    "pin": "Il PIN utilizzato per proteggere il tosaerba"
+                },
+                "description": "Vuoi configurare {name}? \n Assicurati che il tosaerba sia in modalit\u00e0 di associazione."
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "PIN del tosaerba"
+                },
+                "data_description": {
+                    "pin": "Il PIN utilizzato per proteggere il tosaerba"
+                },
+                "description": "Si prega di confermare il PIN per {name}."
             },
             "user": {
                 "data": {
-                    "address": "Indirizzo BLE del dispositivo"
+                    "address": "Indirizzo BLE del dispositivo",
+                    "pin": "PIN del tosaerba"
+                },
+                "data_description": {
+                    "pin": "Il PIN utilizzato per proteggere il tosaerba"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "Il PIN \u00e8 necessario per {domain_name}"
+        }
     }
 }

homeassistant/components/husqvarna_automower_ble/translations/ja.json

@@ -8,9 +8,6 @@
         },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "{name}\u3092\u30bb\u30c3\u30c8\u30a2\u30c3\u30d7\u3057\u307e\u3059\u304b? \u829d\u5208\u308a\u6a5f\u304c\u30da\u30a2\u30ea\u30f3\u30b0\u30e2\u30fc\u30c9\u306b\u306a\u3063\u3066\u3044\u308b\u3053\u3068\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044"
-            },
             "user": {
                 "data": {
                     "address": "\u30c7\u30d0\u30a4\u30b9\u306eBLE\u30a2\u30c9\u30ec\u30b9"

homeassistant/components/husqvarna_automower_ble/translations/lt.json

@@ -4,18 +4,49 @@
             "already_configured": "Prietaisas jau sukonfig\u016bruotas",
             "cannot_connect": "Nepavyko prisijungti",
             "no_devices_found": "\u012esitikinkite, kad vejapjov\u0117 yra susiejimo re\u017eimu, ir bandykite dar kart\u0105. Gali prireikti keli\u0173 bandym\u0173.",
+            "not_allowed": "Nepavyksta nuskaityti duomen\u0173 i\u0161 vejapjov\u0117s, tai paprastai rei\u0161kia, kad ji n\u0117ra suporuota",
+            "reauth_successful": "Pakartotinis autentifikavimas buvo s\u0117kmingas",
             "unknown": "Netik\u0117ta klaida"
         },
+        "error": {
+            "cannot_connect": "Nepavyko prisijungti",
+            "invalid_auth": "Nepavyksta susieti su \u012frenginiu, \u012fsitikinkite, kad PIN kodas teisingas ir vejapjov\u0117 veikia susiejimo re\u017eimu.",
+            "invalid_pin": "PIN kodas turi b\u016bti skai\u010dius"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Ar norite nustatyti {name}? \u012esitikinkite, kad vejapjov\u0117 yra susiejimo re\u017eimu"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "Vejapjov\u0117s PIN kodas"
+                },
+                "data_description": {
+                    "pin": "PIN kodas, naudojamas vejapjovei apsaugoti"
+                },
+                "description": "Ar norite nustatyti {name}? \n \u012esitikinkite, kad vejapjov\u0117 veikia susiejimo re\u017eimu."
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "Vejapjov\u0117s PIN kodas"
+                },
+                "data_description": {
+                    "pin": "PIN kodas, naudojamas vejapjovei apsaugoti"
+                },
+                "description": "Patvirtinkite PIN kod\u0105 {name}."
             },
             "user": {
                 "data": {
-                    "address": "Prietaiso BLE adresas"
+                    "address": "Prietaiso BLE adresas",
+                    "pin": "Vejapjov\u0117s PIN kodas"
+                },
+                "data_description": {
+                    "pin": "PIN kodas, naudojamas vejapjovei apsaugoti"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "PIN kodas reikalingas {domain_name}"
+        }
     }
 }

homeassistant/components/husqvarna_automower_ble/translations/nl.json

@@ -4,13 +4,14 @@
             "already_configured": "Apparaat is al geconfigureerd",
             "cannot_connect": "Kan geen verbinding maken",
             "no_devices_found": "Zorg ervoor dat de maaier in de koppelingsmodus staat en probeer het opnieuw. Het kan een paar pogingen kosten.",
+            "reauth_successful": "Herauthenticatie geslaagd",
             "unknown": "Onverwachte fout"
         },
+        "error": {
+            "cannot_connect": "Kan geen verbinding maken"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Wil je {name} instellen? Zorg ervoor dat de grasmaaier in de koppelingsmodus staat."
-            },
             "user": {
                 "data": {
                     "address": "Apparaat BLE-adres"

homeassistant/components/husqvarna_automower_ble/translations/pt.json

@@ -4,18 +4,49 @@
             "already_configured": "Dispositivo j\u00e1 configurado",
             "cannot_connect": "A liga\u00e7\u00e3o falhou",
             "no_devices_found": "Certifique-se de que o cortador est\u00e1 no modo de emparelhamento e tente novamente. Podem ser necess\u00e1rias algumas tentativas.",
+            "not_allowed": "N\u00e3o \u00e9 poss\u00edvel ler os dados do cortador, o que normalmente significa que n\u00e3o est\u00e1 emparelhado",
+            "reauth_successful": "Reautentica\u00e7\u00e3o bem sucedida",
             "unknown": "Erro inesperado"
         },
+        "error": {
+            "cannot_connect": "A liga\u00e7\u00e3o falhou",
+            "invalid_auth": "N\u00e3o \u00e9 poss\u00edvel emparelhar com o dispositivo, verifique se o PIN est\u00e1 correto e se o cortador est\u00e1 no modo de emparelhamento",
+            "invalid_pin": "O PIN deve ser um n\u00famero"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Deseja configurar {name}? Certifique-se de que o corta-relva est\u00e1 no modo de emparelhamento"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "PIN do cortador de relva"
+                },
+                "data_description": {
+                    "pin": "O PIN utilizado para proteger o cortador de relva"
+                },
+                "description": "Pretende configurar o {name}? Certifique-se de que o cortador est\u00e1 no modo de emparelhamento."
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "PIN do cortador de relva"
+                },
+                "data_description": {
+                    "pin": "O PIN utilizado para proteger o cortador de relva"
+                },
+                "description": "Confirme o PIN para {name}."
             },
             "user": {
                 "data": {
-                    "address": "Endere\u00e7o do dispositivo BLE"
+                    "address": "Endere\u00e7o do dispositivo BLE",
+                    "pin": "PIN do cortador de relva"
+                },
+                "data_description": {
+                    "pin": "O PIN utilizado para proteger o cortador de relva"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "\u00c9 necess\u00e1rio PIN para {domain_name}"
+        }
     }
 }

homeassistant/components/husqvarna_automower_ble/translations/ru.json

@@ -8,9 +8,6 @@
         },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "\u0412\u044b \u0445\u043e\u0442\u0438\u0442\u0435 \u043d\u0430\u0441\u0442\u0440\u043e\u0438\u0442\u044c {name}? \u0423\u0431\u0435\u0434\u0438\u0442\u0435\u0441\u044c, \u0447\u0442\u043e \u0433\u0430\u0437\u043e\u043d\u043e\u043a\u043e\u0441\u0438\u043b\u043a\u0430 \u043d\u0430\u0445\u043e\u0434\u0438\u0442\u0441\u044f \u0432 \u0440\u0435\u0436\u0438\u043c\u0435 \u0441\u043e\u043f\u0440\u044f\u0436\u0435\u043d\u0438\u044f"
-            },
             "user": {
                 "data": {
                     "address": "BLE-\u0430\u0434\u0440\u0435\u0441 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0430"

homeassistant/components/husqvarna_automower_ble/translations/sk.json

@@ -4,18 +4,49 @@
             "already_configured": "Zariadenie u\u017e je nakonfigurovan\u00e9",
             "cannot_connect": "Nepodarilo sa pripoji\u0165",
             "no_devices_found": "Uistite sa, \u017ee je kosa\u010dka v re\u017eime p\u00e1rovania a sk\u00faste to znova. M\u00f4\u017ee to trva\u0165 nieko\u013eko pokusov.",
+            "not_allowed": "Nie je mo\u017en\u00e9 na\u010d\u00edta\u0165 \u00fadaje z kosa\u010dky, \u010do zvy\u010dajne znamen\u00e1, \u017ee nie je sp\u00e1rovan\u00e1",
+            "reauth_successful": "Op\u00e4tovn\u00e9 overenie bolo \u00faspe\u0161n\u00e9",
             "unknown": "Neo\u010dak\u00e1van\u00e1 chyba"
         },
+        "error": {
+            "cannot_connect": "Nepodarilo sa pripoji\u0165",
+            "invalid_auth": "Nemo\u017eno sp\u00e1rova\u0165 so zariaden\u00edm, skontrolujte, \u010di je k\u00f3d PIN spr\u00e1vny a \u010di je kosa\u010dka v re\u017eime p\u00e1rovania",
+            "invalid_pin": "PIN mus\u00ed by\u0165 \u010d\u00edslo"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Chcete nastavi\u0165 {name}? Uistite sa, \u017ee je kosa\u010dka v re\u017eime p\u00e1rovania"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "PIN kosa\u010dky"
+                },
+                "data_description": {
+                    "pin": "PIN pou\u017eit\u00fd na zaistenie kosa\u010dky"
+                },
+                "description": "Chcete nastavi\u0165 str\u00e1nku {name}? Uistite sa, \u017ee je kosa\u010dka v re\u017eime p\u00e1rovania."
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "PIN kosa\u010dky"
+                },
+                "data_description": {
+                    "pin": "PIN pou\u017eit\u00fd na zaistenie kosa\u010dky"
+                },
+                "description": "Potvr\u010fte pros\u00edm PIN k\u00f3d pre {name}."
             },
             "user": {
                 "data": {
-                    "address": "Adresa BLE zariadenia"
+                    "address": "Adresa BLE zariadenia",
+                    "pin": "PIN kosa\u010dky"
+                },
+                "data_description": {
+                    "pin": "PIN pou\u017eit\u00fd na zaistenie kosa\u010dky"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "Pre {domain_name} je potrebn\u00fd PIN k\u00f3d"
+        }
     }
 }

homeassistant/components/husqvarna_automower_ble/translations/sv.json

@@ -8,9 +8,6 @@
         },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "Vill du st\u00e4lla in {name}? Kontrollera att gr\u00e4sklipparen \u00e4r i parkopplingsl\u00e4ge"
-            },
             "user": {
                 "data": {
                     "address": "Enhetens BLE-adress"

homeassistant/components/husqvarna_automower_ble/translations/tr.json

@@ -8,9 +8,6 @@
         },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "{name} kurmak istiyor musunuz? Bi\u00e7me makinesinin e\u015fle\u015ftirme modunda oldu\u011fundan emin olun"
-            },
             "user": {
                 "data": {
                     "address": "Ayg\u0131t BLE adresi"

homeassistant/components/husqvarna_automower_ble/translations/zh-Hans.json

@@ -4,18 +4,49 @@
             "already_configured": "\u8bbe\u5907\u5df2\u914d\u7f6e",
             "cannot_connect": "\u8fde\u63a5\u5931\u8d25",
             "no_devices_found": "\u786e\u4fdd\u5272\u8349\u673a\u5904\u4e8e\u914d\u5bf9\u6a21\u5f0f\uff0c\u7136\u540e\u91cd\u8bd5\u3002\u8fd9\u53ef\u80fd\u9700\u8981\u5c1d\u8bd5\u591a\u6b21\u3002",
+            "not_allowed": "\u65e0\u6cd5\u4ece\u5272\u8349\u673a\u8bfb\u53d6\u6570\u636e\uff0c\u8fd9\u901a\u5e38\u610f\u5473\u7740\u5b83\u6ca1\u6709\u914d\u5bf9",
+            "reauth_successful": "\u91cd\u65b0\u8ba4\u8bc1\u6210\u529f",
             "unknown": "\u610f\u5916\u9519\u8bef"
         },
+        "error": {
+            "cannot_connect": "\u8fde\u63a5\u5931\u8d25",
+            "invalid_auth": "\u65e0\u6cd5\u4e0e\u8bbe\u5907\u914d\u5bf9\uff0c\u8bf7\u786e\u4fdd PIN \u7801\u6b63\u786e\u4e14\u5272\u8349\u673a\u5904\u4e8e\u914d\u5bf9\u6a21\u5f0f",
+            "invalid_pin": "PIN \u7801\u5fc5\u987b\u662f\u6570\u5b57"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "\u60a8\u8981\u8bbe\u7f6e {name} \u5417 \uff1f\u8bf7\u786e\u4fdd\u5272\u8349\u673a\u5904\u4e8e\u914d\u5bf9\u6a21\u5f0f"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "\u5272\u8349\u673a PIN \u7801"
+                },
+                "data_description": {
+                    "pin": "\u7528\u4e8e\u4fdd\u62a4\u5272\u8349\u673a\u7684 PIN \u7801"
+                },
+                "description": "\u60a8\u8981\u8bbe\u7f6e\u201c{name}\u201d\u5417 \uff1f\n\u786e\u4fdd\u5272\u8349\u673a\u5904\u4e8e\u914d\u5bf9\u6a21\u5f0f\u3002"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "\u5272\u8349\u673a PIN \u7801"
+                },
+                "data_description": {
+                    "pin": "\u7528\u4e8e\u4fdd\u62a4\u5272\u8349\u673a\u7684 PIN \u7801"
+                },
+                "description": "\u8bf7\u786e\u8ba4\"{name}\"\u7684 PIN \u7801\u3002"
             },
             "user": {
                 "data": {
-                    "address": "\u8bbe\u5907 BLE \u5730\u5740"
+                    "address": "\u8bbe\u5907 BLE \u5730\u5740",
+                    "pin": "\u5272\u8349\u673a PIN \u7801"
+                },
+                "data_description": {
+                    "pin": "\u7528\u4e8e\u4fdd\u62a4\u5272\u8349\u673a\u7684 PIN \u7801"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "{domain_name} \u9700\u8981 PIN \u7801"
+        }
     }
 }

homeassistant/components/husqvarna_automower_ble/translations/zh-Hant.json

@@ -4,18 +4,49 @@
             "already_configured": "\u88dd\u7f6e\u5df2\u7d93\u8a2d\u5b9a\u5b8c\u6210",
             "cannot_connect": "\u9023\u7dda\u5931\u6557",
             "no_devices_found": "\u8acb\u78ba\u4fdd\u5272\u8349\u6a5f\u5df2\u8655\u65bc\u914d\u5c0d\u6a21\u5f0f\uff0c\u7136\u5f8c\u518d\u8a66\u4e00\u6b21\u3002\u53ef\u80fd\u9700\u8981\u591a\u5617\u8a66\u5e7e\u6b21\u3002",
+            "not_allowed": "\u7121\u6cd5\u5f9e\u5272\u8349\u6a5f\u8b80\u53d6\u8cc7\u6599\uff0c\u901a\u5e38\u8868\u793a\u5c1a\u672a\u914d\u5c0d",
+            "reauth_successful": "\u91cd\u65b0\u8a8d\u8b49\u6210\u529f",
             "unknown": "\u672a\u9810\u671f\u932f\u8aa4"
         },
+        "error": {
+            "cannot_connect": "\u9023\u7dda\u5931\u6557",
+            "invalid_auth": "\u7121\u6cd5\u8207\u88dd\u7f6e\u914d\u5c0d\uff0c\u8acb\u78ba\u8a8d PIN \u78bc\u6b63\u78ba\u4e14\u5272\u8349\u6a5f\u8655\u65bc\u914d\u5c0d\u6a21\u5f0f",
+            "invalid_pin": "PIN \u78bc\u5fc5\u9808\u662f\u6578\u5b57"
+        },
         "flow_title": "{name} ({address})",
         "step": {
-            "confirm": {
-                "description": "\u662f\u5426\u8981\u8a2d\u5b9a {name}\uff1f\u8acb\u78ba\u5b9a\u5272\u8349\u6a5f\u5df2\u7d93\u8655\u65bc\u914d\u5c0d\u6a21\u5f0f"
+            "bluetooth_confirm": {
+                "data": {
+                    "pin": "\u5272\u8349\u6a5f PIN"
+                },
+                "data_description": {
+                    "pin": "\u7528\u65bc\u78ba\u4fdd\u5272\u8349\u6a5f\u7684 PIN \u78bc"
+                },
+                "description": "\u662f\u5426\u8981\u8a2d\u5b9a {name}\uff1f\n\u8acb\u78ba\u5b9a\u5272\u8349\u6a5f\u5df2\u7d93\u8655\u65bc\u914d\u5c0d\u6a21\u5f0f\u3002"
+            },
+            "reauth_confirm": {
+                "data": {
+                    "pin": "\u5272\u8349\u6a5f PIN"
+                },
+                "data_description": {
+                    "pin": "\u7528\u65bc\u78ba\u4fdd\u5272\u8349\u6a5f\u7684 PIN \u78bc"
+                },
+                "description": "\u8acb\u78ba\u8a8d {name} PIN \u78bc\u3002"
             },
             "user": {
                 "data": {
-                    "address": "\u88dd\u7f6e BLE \u4f4d\u5740"
+                    "address": "\u88dd\u7f6e BLE \u4f4d\u5740",
+                    "pin": "\u5272\u8349\u6a5f PIN"
+                },
+                "data_description": {
+                    "pin": "\u7528\u65bc\u78ba\u4fdd\u5272\u8349\u6a5f\u7684 PIN \u78bc"
                 }
             }
         }
+    },
+    "exceptions": {
+        "pin_required": {
+            "message": "{domain_name} \u9700\u8981 PIN \u78bc"
+        }
     }
 }

homeassistant/components/huum/const.py

@@ -4,7 +4,7 @@ from homeassistant.const import Platform
 
 DOMAIN = "huum"
 
-PLATFORMS = [Platform.BINARY_SENSOR, Platform.CLIMATE, Platform.LIGHT]
+PLATFORMS = [Platform.BINARY_SENSOR, Platform.CLIMATE, Platform.LIGHT, Platform.NUMBER]
 
 CONFIG_STEAMER = 1
 CONFIG_LIGHT = 2

homeassistant/components/huum/icons.json

@@ -0,0 +1,13 @@
+{
+  "entity": {
+    "number": {
+      "humidity": {
+        "default": "mdi:water",
+        "range": {
+          "0": "mdi:water-off",
+          "1": "mdi:water"
+        }
+      }
+    }
+  }
+}

homeassistant/components/huum/manifest.json

@@ -5,5 +5,5 @@
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/huum",
   "iot_class": "cloud_polling",
-  "requirements": ["huum==0.8.0"]
+  "requirements": ["huum==0.8.1"]
 }

homeassistant/components/huum/number.py

@@ -0,0 +1,64 @@
+"""Control for steamer."""
+
+from __future__ import annotations
+
+import logging
+
+from huum.const import SaunaStatus
+
+from homeassistant.components.number import NumberEntity
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
+
+from .const import CONFIG_STEAMER, CONFIG_STEAMER_AND_LIGHT
+from .coordinator import HuumConfigEntry, HuumDataUpdateCoordinator
+from .entity import HuumBaseEntity
+
+_LOGGER = logging.getLogger(__name__)
+
+
+async def async_setup_entry(
+    hass: HomeAssistant,
+    config_entry: HuumConfigEntry,
+    async_add_entities: AddConfigEntryEntitiesCallback,
+) -> None:
+    """Set up steamer if applicable."""
+    coordinator = config_entry.runtime_data
+
+    # Light is configured for this sauna.
+    if coordinator.data.config in [CONFIG_STEAMER, CONFIG_STEAMER_AND_LIGHT]:
+        async_add_entities([HuumSteamer(coordinator)])
+
+
+class HuumSteamer(HuumBaseEntity, NumberEntity):
+    """Representation of a steamer."""
+
+    _attr_translation_key = "humidity"
+    _attr_native_max_value = 10
+    _attr_native_min_value = 0
+    _attr_native_step = 1
+
+    def __init__(self, coordinator: HuumDataUpdateCoordinator) -> None:
+        """Initialize the steamer."""
+        super().__init__(coordinator)
+
+        self._attr_unique_id = coordinator.config_entry.entry_id
+
+    @property
+    def native_value(self) -> float:
+        """Return the current value."""
+        return self.coordinator.data.humidity
+
+    async def async_set_native_value(self, value: float) -> None:
+        """Update the current value."""
+        target_temperature = self.coordinator.data.target_temperature
+        if (
+            not target_temperature
+            or self.coordinator.data.status != SaunaStatus.ONLINE_HEATING
+        ):
+            return
+
+        await self.coordinator.huum.turn_on(
+            temperature=target_temperature, humidity=int(value)
+        )
+        await self.coordinator.async_refresh()

homeassistant/components/huum/strings.json

@@ -24,6 +24,11 @@
       "light": {
         "name": "[%key:component::light::title%]"
       }
+    },
+    "number": {
+      "humidity": {
+        "name": "[%key:component::sensor::entity_component::humidity::name%]"
+      }
     }
   }
 }

homeassistant/components/huum/translations/ca.json

@@ -22,6 +22,11 @@
             "light": {
                 "name": "Llum"
             }
+        },
+        "number": {
+            "humidity": {
+                "name": "Humitat"
+            }
         }
     }
 }