homeassistant 2025.8.3__py3-none-any.whl → 2025.9.0b1__py3-none-any.whl

homeassistant/components/mqtt/translations/hu.json

@@ -282,7 +282,6 @@
                         "color_temp_template": "[Sabon](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) a sz\u00ednh\u0151m\u00e9rs\u00e9klet (Kelvin) kinyer\u00e9s\u00e9hez az \u00e1llapot adatcsomagb\u00f3l. A sablon eredm\u00e9nye egy eg\u00e9sz sz\u00e1m kell legyen.",
                         "command_off_template": "A [sablon](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) az \"off\" ki \u00e1llapot v\u00e1lt\u00e1s\u00e1hoz. El\u00e9rhet\u0151 v\u00e1ltoz\u00f3k: `state` \u00e9s `transition`.",
                         "command_on_template": "A [sablon](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) az \"on\" \u00e1llapot v\u00e1lt\u00e1s\u00e1hoz. El\u00e9rhet\u0151 v\u00e1ltoz\u00f3k: `state`, `brightness`, `color_temp`, `red`, `green`, `blue`, `hue`, `sat`, `flash`, `transition`, valamint `effect`. A `red`, `green`, `blue` \u00e9s `brightness` \u00e9rt\u00e9kek 0\u2013255 k\u00f6z\u00f6tti eg\u00e9szek. A `hue` 0\u2013360 k\u00f6z\u00f6tti lebeg\u0151pontos sz\u00e1m, a `sat` 0\u2013100 k\u00f6z\u00f6tti lebeg\u0151pontos sz\u00e1m, a `color_temp` pedig eg\u00e9sz sz\u00e1m Kelvinben.",
-                        "command_template": "Egy [sablon](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt), amely a parancs t\u00e9m\u00e1ra k\u00fcldend\u0151 adatcsomagot gener\u00e1lja.",
                         "command_topic": "Az a k\u00f6zz\u00e9t\u00e9teli t\u00e9ma, amelyet a(z) {platform} entit\u00e1s vez\u00e9rl\u00e9s\u00e9re haszn\u00e1lnak. [Tov\u00e1bbi inform\u00e1ci\u00f3.]({url}#command_topic)",
                         "force_update": "Friss\u00edt\u00e9si esem\u00e9nyeket k\u00fcld akkor is, ha az \u00e9rt\u00e9k nem v\u00e1ltozott. Hasznos, ha az el\u0151zm\u00e9nyekben \u00e9rtelmezhet\u0151 \u00e9rt\u00e9kgrafikonokat szeretne megjelen\u00edteni. [Tov\u00e1bbi inform\u00e1ci\u00f3.]({url}#force_update)",
                         "green_template": "[Sabon](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) a z\u00f6ld sz\u00edn kinyer\u00e9s\u00e9hez az \u00e1llapot adatcsomagb\u00f3l. A sablon eredm\u00e9nye egy 0 \u00e9s 255 k\u00f6z\u00f6tti eg\u00e9sz sz\u00e1m kell legyen.",
@@ -1023,22 +1022,5 @@
             "description": "\u00dajrat\u00f6lti az MQTT entit\u00e1sokat a YAML-konfigur\u00e1ci\u00f3b\u00f3l.",
             "name": "\u00dajrat\u00f6lt\u00e9s"
         }
-    },
-    "triggers": {
-        "mqtt": {
-            "description": "Amikor egy adott \u00fczenet \u00e9rkezik egy megadott MQTT t\u00e9m\u00e1n",
-            "description_configured": "Amikor egy MQTT \u00fczenet \u00e9rkezett",
-            "fields": {
-                "payload": {
-                    "description": "A kiv\u00e1lt\u00f3 esem\u00e9nyt aktiv\u00e1l\u00f3 adatcsomag.",
-                    "name": "Adatcsomag"
-                },
-                "topic": {
-                    "description": "Az MQTT t\u00e9ma, amelyre figyelni kell.",
-                    "name": "T\u00e9ma"
-                }
-            },
-            "name": "MQTT"
-        }
     }
 }

homeassistant/components/mqtt/translations/it.json

@@ -50,7 +50,8 @@
                 "description": "Inserisci le informazioni di connessione del tuo broker MQTT."
             },
             "hassio_confirm": {
-                "description": "Vuoi configurare Home Assistant per connettersi al broker MQTT fornito dal componente aggiuntivo: {addon}?"
+                "description": "Vuoi configurare Home Assistant per connettersi al broker MQTT fornito dal componente aggiuntivo: {addon}?",
+                "title": "Broker MQTT tramite il componente aggiuntivo di Home Assistant"
             },
             "reauth_confirm": {
                 "data": {
@@ -85,18 +86,22 @@
                 },
                 "entity_platform_config": {
                     "data": {
+                        "alarm_control_panel_code_mode": "Modalit\u00e0 di convalida del codice di allarme",
                         "entity_category": "Categoria dell'entit\u00e0",
                         "fan_feature_direction": "Funzione direzione",
                         "fan_feature_oscillation": "Funzione oscillazione",
                         "fan_feature_preset_modes": "Modalit\u00e0 predefinite supportate",
-                        "fan_feature_speed": "Supporto alla velocit\u00e0"
+                        "fan_feature_speed": "Supporto alla velocit\u00e0",
+                        "supported_features": "Funzionalit\u00e0 supportate"
                     },
                     "data_description": {
+                        "alarm_control_panel_code_mode": "Configura come il pannello di controllo dell'allarme valida il codice. Un codice locale viene configurato con l'entit\u00e0 e viene validato da Home Assistant. Un codice remoto viene inviato al dispositivo e validato da remoto. [Per saperne di pi\u00f9.]({url}#code)",
                         "entity_category": "Consente di contrassegnare un'entit\u00e0 come configurazione del dispositivo o diagnostica. Un'entit\u00e0 con una categoria non verr\u00e0 esposta ai componenti cloud, Alexa o Google Assistant, n\u00e9 inclusa nelle chiamate di azione indirette a dispositivi o aree. Alle entit\u00e0 di tipo sensore non pu\u00f2 essere assegnata una classe di configurazione del dispositivo. [Per saperne di pi\u00f9.](https://developers.home-assistant.io/docs/core/entity/#registry-properties)",
                         "fan_feature_direction": "Il ventilatore supporta la direzione.",
                         "fan_feature_oscillation": "Il ventilatore \u00e8 dotato di funzione oscillante.",
                         "fan_feature_preset_modes": "Il ventilatore offre modalit\u00e0 predefinite.",
-                        "fan_feature_speed": "Il ventilatore offre diverse velocit\u00e0."
+                        "fan_feature_speed": "Il ventilatore offre diverse velocit\u00e0.",
+                        "supported_features": "Funzionalit\u00e0 supportate dall'entit\u00e0."
                     },
                     "sections": {
                         "advanced_settings": {
@@ -105,7 +110,40 @@
                     }
                 },
                 "mqtt_platform_config": {
+                    "data": {
+                        "code": "Codice di allarme",
+                        "code_arm_required": "Codice di attivazione richiesto",
+                        "code_disarm_required": "Codice di disattivazione richiesto",
+                        "code_trigger_required": "Codice di innesco richiesto"
+                    },
+                    "data_description": {
+                        "code": "Specifica un codice per abilitare o disabilitare l'allarme nell'interfaccia frontend. Nota che questo blocca l'invio di comandi tramite messaggi MQTT al dispositivo remoto se la convalida del codice fallisce. [Per saperne di pi\u00f9.]({url}#code)",
+                        "code_arm_required": "Se impostato, il codice \u00e8 richiesto per inserire l'allarme. Se non impostato, il codice non viene verificato.",
+                        "code_disarm_required": "Se impostato, il codice \u00e8 richiesto per disattivare l'allarme. Se non impostato, il codice non viene verificato.",
+                        "code_trigger_required": "Se impostato, \u00e8 necessario inserire il codice manualmente per attivare l'allarme. Se non impostato, il codice non viene verificato."
+                    },
                     "sections": {
+                        "alarm_control_panel_payload_settings": {
+                            "data": {
+                                "payload_arm_away": "Payload \"attiva fuori casa\"",
+                                "payload_arm_custom_bypass": "Payload \"attiva con esclusione personalizzata\"",
+                                "payload_arm_disarm": "Payload \"disattiva\"",
+                                "payload_arm_home": "Payload \"attiva in casa\"",
+                                "payload_arm_night": "Payload \"attiva notte\"",
+                                "payload_arm_vacation": "Payload \"attiva in vacanza\"",
+                                "payload_trigger": "Payload \"attiva allarme\""
+                            },
+                            "data_description": {
+                                "payload_arm_away": "Il payload inviato quando viene emesso un comando di \"Attiva Fuori Casa\".",
+                                "payload_arm_custom_bypass": "Il payload inviato quando viene emesso un comando di \"Attiva con esclusione personalizzata\".",
+                                "payload_arm_disarm": "Il payload inviato quando viene emesso un comando di \"Disattivazione\".",
+                                "payload_arm_home": "Il payload inviato quando viene emesso un comando \"Attiva In casa\".",
+                                "payload_arm_night": "Il payload inviato quando viene emesso un comando \"Attiva notte\".",
+                                "payload_arm_vacation": "Il payload inviato quando viene emesso un comando di \"Attiva in vacanza\".",
+                                "payload_trigger": "Il payload inviato quando viene emesso un comando di \"Attivazione allarme\"."
+                            },
+                            "name": "Impostazioni del payload del pannello di controllo dell'allarme"
+                        },
                         "climate_preset_mode_settings": {
                             "data": {
                                 "preset_mode_command_template": "Modello di comando modalit\u00e0 preimpostata",
@@ -326,6 +364,23 @@
         }
     },
     "selector": {
+        "alarm_control_panel_code_mode": {
+            "options": {
+                "local_code": "Convalida del codice locale",
+                "remote_code": "Convalida numerica del codice remoto",
+                "remote_code_text": "Convalida testuale del codice remoto"
+            }
+        },
+        "alarm_control_panel_features": {
+            "options": {
+                "arm_away": "Attiva Fuori Casa",
+                "arm_custom_bypass": "Attiva con esclusione personalizzata",
+                "arm_home": "Attiva In casa",
+                "arm_night": "Attiva notte",
+                "arm_vacation": "Attiva in vacanza",
+                "trigger": "Attivazione"
+            }
+        },
         "climate_modes": {
             "options": {
                 "auto": "Automatico",
@@ -384,6 +439,7 @@
         },
         "platform": {
             "options": {
+                "alarm_control_panel": "Pannello di controllo degli allarmi",
                 "binary_sensor": "Sensore binario",
                 "climate": "Climatizzatore",
                 "fan": "Ventilatore"
@@ -444,7 +500,7 @@
         }
     },
     "triggers": {
-        "mqtt": {
+        "_": {
             "description": "Quando viene ricevuto un messaggio specifico su un determinato argomento MQTT.",
             "description_configured": "Quando \u00e8 stato ricevuto un messaggio MQTT",
             "fields": {

homeassistant/components/mqtt/translations/ja.json

@@ -454,22 +454,5 @@
             "description": "YAML \u69cb\u6210 \u304b\u3089 MQTT \u30a8\u30f3\u30c6\u30a3\u30c6\u30a3\u3092\u30ea\u30ed\u30fc\u30c9\u3059\u308b\u3002",
             "name": "\u30ea\u30ed\u30fc\u30c9"
         }
-    },
-    "triggers": {
-        "mqtt": {
-            "description": "\u7279\u5b9a\u306e MQTT \u30c8\u30d4\u30c3\u30af\u3067\u7279\u5b9a\u306e\u30e1\u30c3\u30bb\u30fc\u30b8\u3092\u53d7\u4fe1\u3057\u305f\u3068\u304d\u3002",
-            "description_configured": "MQTT \u30e1\u30c3\u30bb\u30fc\u30b8\u3092\u53d7\u4fe1\u3057\u305f\u3068\u304d",
-            "fields": {
-                "payload": {
-                    "description": "\u30c8\u30ea\u30ac\u30fc\u3059\u308b\u30da\u30a4\u30ed\u30fc\u30c9\u3002",
-                    "name": "\u30da\u30a4\u30ed\u30fc\u30c9"
-                },
-                "topic": {
-                    "description": "\u30ea\u30c3\u30b9\u30f3\u3059\u308b MQTT \u30c8\u30d4\u30c3\u30af\u3002",
-                    "name": "\u30c8\u30d4\u30c3\u30af"
-                }
-            },
-            "name": "MQTT"
-        }
     }
 }

homeassistant/components/mqtt/translations/lt.json

@@ -212,6 +212,7 @@
                 },
                 "entity_platform_config": {
                     "data": {
+                        "alarm_control_panel_code_mode": "Signalizacijos kodo patvirtinimo re\u017eimas",
                         "climate_feature_action": "Dabartin\u0117 veiksm\u0173 parama",
                         "climate_feature_current_humidity": "Dabartinis dr\u0117gm\u0117s palaikymas",
                         "climate_feature_current_temperature": "Dabartin\u0117s temperat\u016bros palaikymas",
@@ -232,10 +233,12 @@
                         "schema": "Schema",
                         "state_class": "B\u016bsenos klas\u0117",
                         "suggested_display_precision": "Si\u016blomas rodymo tikslumas",
+                        "supported_features": "Palaikomos funkcijos",
                         "temperature_unit": "Temperat\u016bros vienetas",
                         "unit_of_measurement": "Matavimo vienetas"
                     },
                     "data_description": {
+                        "alarm_control_panel_code_mode": "Konfig\u016bruojama, kaip signalizacijos valdymo pultas patvirtina kod\u0105. Vietinis kodas sukonfig\u016bruojamas su objektu ir patvirtinamas Home Assistant. Nuotolinis kodas siun\u010diamas \u012f \u012frengin\u012f ir patvirtinamas nuotoliniu b\u016bdu. [Su\u017einokite daugiau.] ( {url} #kodas)",
                         "climate_feature_action": "Klimatas palaiko dabartini\u0173 veiksm\u0173 prane\u0161im\u0105.",
                         "climate_feature_current_humidity": "Klimatas padeda prane\u0161ti apie dabartin\u0119 dr\u0117gm\u0119.",
                         "climate_feature_current_temperature": "Klimato funkcija palaiko esamos temperat\u016bros ataskait\u0173 teikim\u0105.",
@@ -255,6 +258,7 @@
                         "schema": "Naudotina schema. [Su\u017einokite daugiau]({url}#comparison-of-light-mqtt-schemas)",
                         "state_class": "Jutiklio [b\u016bsenos klas\u0117](https://developers.home-assistant.io/docs/core/entity/sensor/#available-state-classes). [Su\u017einokite daugiau.]( {url} #state_class)",
                         "suggested_display_precision": "De\u0161imt\u0173j\u0173 tikslumu skai\u010dius, kuris tur\u0117t\u0173 b\u016bti naudojamas {platform} esyb\u0117s b\u016bsenos po apvalinimo. [Su\u017einokite daugiau]({url}#suggested_display_precision)",
+                        "supported_features": "Funkcijos, kurias palaiko objektas.",
                         "temperature_unit": "Tai nustato natyv\u0173 matavimo vienet\u0105, su kuriuo veikia MQTT klimato prietaisas.",
                         "unit_of_measurement": "Apibr\u0117\u017eia jutiklio matavimo vienet\u0105, jei toks yra."
                     },
@@ -306,6 +310,10 @@
                     "data": {
                         "blue_template": "M\u0117lynas \u0161ablonas",
                         "brightness_template": "Ry\u0161kumo \u0161ablonas",
+                        "code": "Signalizacijos kodas",
+                        "code_arm_required": "Reikalinga kodin\u0117 ranka",
+                        "code_disarm_required": "Reikalingas kodinis i\u0161jungimas",
+                        "code_trigger_required": "Reikalingas kodo aktyviklis",
                         "color_temp_template": "Spalv\u0173 temperat\u016bros \u0161ablonas",
                         "command_off_template": "Komandos \"i\u0161jungta\" \u0161ablonas",
                         "command_on_template": "Komandos \"\u012fjungta\" \u0161ablonas",
@@ -338,10 +346,13 @@
                     "data_description": {
                         "blue_template": "[\u0160ablonas](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt), skirtas m\u0117lynai spalvai i\u0161gauti i\u0161 b\u016bsenos \u017einut\u0117s reik\u0161m\u0117s. \u0160ablono rezultatas bus sveikasis skai\u010dius nuo 0 iki 255.",
                         "brightness_template": "[\u0160ablonas](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt), skirtas ry\u0161kumui i\u0161gauti i\u0161 b\u016bsenos \u017einut\u0117s reik\u0161m\u0117s. \u0160ablono rezultatas bus sveikasis skai\u010dius nuo 0 iki 255.",
+                        "code": "Nurodo kod\u0105, skirt\u0105 \u012fjungti arba i\u0161jungti aliarm\u0105 priekin\u0117je dalyje. Atminkite, kad tai blokuoja MQTT prane\u0161im\u0173 komand\u0173 siuntim\u0105 \u012f nuotolin\u012f \u012frengin\u012f, jei kodo patvirtinimas nepavyksta. [Su\u017einokite daugiau.] ( {url} #kodas)",
+                        "code_arm_required": "Jei nustatytas, kodas reikalingas signalizacijai \u012fjungti. Jei nenustatytas, kodas nepatvirtinamas.",
+                        "code_disarm_required": "Jei nustatytas, kodas reikalingas signalizacijai i\u0161jungti. Jei nenustatytas, kodas nepatvirtinamas.",
+                        "code_trigger_required": "Jei nustatytas, kodas reikalingas norint rankiniu b\u016bdu suaktyvinti aliarm\u0105. Jei nenustatytas, kodas nepatvirtinamas.",
                         "color_temp_template": "[\u0160ablonas](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt), skirtas spalvos temperat\u016brai kelvinais i\u0161gauti i\u0161 b\u016bsenos \u017einut\u0117s reik\u0161m\u0117s. \u0160ablono rezultatas bus sveikasis skai\u010dius.",
                         "command_off_template": "[\u0160ablonas](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) b\u016bsenos \u201ei\u0161jungta\u201c pakeitimams. Galimi kintamieji: `state` ir `transition`.",
                         "command_on_template": "[\u0160ablonas](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) \u201e\u012fjungta\u201c b\u016bsenos pakeitimams. Galimi kintamieji: `state`, `brightness`, `color_temp`, `red`, `green`, `blue`, `hue`, `sat`, `flash`, `transition` ir `effect`. Reik\u0161m\u0117s `red`, `green`, `blue` ir `brightness` pateikiamos kaip sveikieji skai\u010diai nuo 0 iki 255 diapazono. `hue` reik\u0161m\u0117 pateikiama kaip slankiojo skai\u010diaus reik\u0161m\u0117 nuo 0 iki 360 diapazono. `sat` reik\u0161m\u0117 pateikiama kaip slankiojo skai\u010diaus reik\u0161m\u0117 nuo 0 iki 100. `color_temp` reik\u0161m\u0117 pateikiama kaip sveikasis skai\u010dius, atitinkantis Kelvino vienetus.",
-                        "command_template": "[\u0160ablonas](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt), skirtas pateikti \u017einut\u0119, kuri bus skelbiamas komand\u0173 temoje.",
                         "command_topic": "Paskelbimo tema, kuri bus naudojama subjektui {platform} valdyti. [Su\u017einokite daugiau.]( {url} #command_topic)",
                         "force_update": "Siun\u010dia atnaujinimo \u012fvykius, net jei vert\u0117 nepasikeit\u0117. Naudinga, jei norite tur\u0117ti reik\u0161ming\u0173 reik\u0161mi\u0173 grafikus istorijoje. [Su\u017einokite daugiau.]({url}#force_update)",
                         "green_template": "[\u0160ablonas](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt), skirtas \u017ealiai spalvai i\u0161gauti i\u0161 b\u016bsenos \u017einut\u0117s reik\u0161m\u0117s. \u0160ablono rezultatas bus sveikasis skai\u010dius nuo 0 iki 255.",
@@ -391,6 +402,19 @@
                             },
                             "name": "I\u0161pl\u0117stiniai nustatymai"
                         },
+                        "alarm_control_panel_payload_settings": {
+                            "data": {
+                                "payload_arm_disarm": "Naudingoji apkrova i\u0161jungta\"",
+                                "payload_arm_home": "Naudingoji apkrova \"signalizacija namuose\u201c",
+                                "payload_arm_night": "Naudingoji apkrova \"signalizacija nakt\u012f\u201c",
+                                "payload_arm_vacation": "Naudingoji apkrova \"signalizacijos atostogos\u201c",
+                                "payload_trigger": "Naudingoji apkrova \"suveikimo pavojaus signalas\""
+                            },
+                            "data_description": {
+                                "payload_arm_away": "Naudingoji apkrova, siun\u010diama, kai duodama komanda \"atjungti apsaug\u0105\u201c."
+                            },
+                            "name": "Signalizacijos valdymo pulto naudingosios apkrovos nustatymai"
+                        },
                         "climate_action_settings": {
                             "data": {
                                 "action_template": "Veiksmo \u0161ablonas",
@@ -790,6 +814,9 @@
                             },
                             "name": "XY spalv\u0173 re\u017eimo nustatymai"
                         },
+                        "lock_payload_settings": {
+                            "name": "U\u017erakinti naudingosios apkrovos nustatymus"
+                        },
                         "target_humidity_settings": {
                             "data": {
                                 "max_humidity": "Maksimali dr\u0117gm\u0117",
@@ -1056,6 +1083,23 @@
         }
     },
     "selector": {
+        "alarm_control_panel_code_mode": {
+            "options": {
+                "local_code": "Vietinio kodo patvirtinimas",
+                "remote_code": "Skaitmeninis nuotolinio kodo patvirtinimas",
+                "remote_code_text": "Nuotolinis teksto kodo patvirtinimas"
+            }
+        },
+        "alarm_control_panel_features": {
+            "options": {
+                "arm_away": "Apsaugota kai i\u0161vyk\u0119s",
+                "arm_custom_bypass": "Apsaugota su pasirinktine apsauga",
+                "arm_home": "Apsaugoti namai",
+                "arm_night": "Apsaugotas nakt\u012f",
+                "arm_vacation": "Apsaugotas - atostog\u0173 re\u017eime",
+                "trigger": "Trigeris"
+            }
+        },
         "climate_modes": {
             "options": {
                 "auto": "Automatinis",
@@ -1209,12 +1253,14 @@
         },
         "platform": {
             "options": {
+                "alarm_control_panel": "Signalizacijos valdymo pultas",
                 "binary_sensor": "Dvejetainis jutiklis",
                 "button": "Mygtukas",
                 "climate": "Termostatas",
                 "cover": "Vir\u0161elis",
                 "fan": "Ventiliatorius",
                 "light": "Lempa",
+                "lock": "U\u017eraktas",
                 "notify": "Prane\u0161imai",
                 "sensor": "Jutiklis",
                 "switch": "Jungiklis"
@@ -1303,8 +1349,8 @@
         }
     },
     "triggers": {
-        "mqtt": {
-            "description": "Kai tam tikra MQTT tema gaunamas konkretus prane\u0161imas.",
+        "_": {
+            "description": "Kai gaunamas konkretus prane\u0161imas tam tikra MQTT tema.",
             "description_configured": "Kai gaunamas MQTT prane\u0161imas",
             "fields": {
                 "payload": {
@@ -1312,7 +1358,7 @@
                     "name": "\u017dinut\u0117s turinys"
                 },
                 "topic": {
-                    "description": "MQTT tema, kurios reikia klausytis.",
+                    "description": "MQTT tema, kurios verta klausytis.",
                     "name": "Tema"
                 }
             },

homeassistant/components/mqtt/translations/mk.json

@@ -180,16 +180,5 @@
                 "brightness": "\u041e\u0441\u0432\u0435\u0442\u043b\u0435\u043d\u043e\u0441\u0442"
             }
         }
-    },
-    "triggers": {
-        "mqtt": {
-            "fields": {
-                "topic": {
-                    "description": "MQTT \u0442\u0435\u043c\u0430 \u0437\u0430 \u0441\u043b\u0443\u0448\u0430\u045a\u0435.",
-                    "name": "\u0422\u0435\u043c\u0430"
-                }
-            },
-            "name": "MQTT"
-        }
     }
 }

homeassistant/components/mqtt/translations/nl.json

@@ -118,6 +118,7 @@
                 "fan_preset_mode_reset_in_preset_modes_list": "Bericht \"reset preset mode\" is niet geldig als preset mode",
                 "fan_speed_range_max_must_be_greater_than_speed_range_min": "Snelheidsbereik max moet groter zijn dan snelheidsbereik min",
                 "invalid_input": "Ongeldige waarde",
+                "invalid_regular_expression": "Moet een geldige reguliere expressie zijn",
                 "invalid_subscribe_topic": "Ongeldige topic om op te abonneren",
                 "invalid_supported_color_modes": "Ongeldige ondersteunde kleurmodi selectie",
                 "invalid_template": "Ongeldig sjabloon",
@@ -219,6 +220,7 @@
                 },
                 "entity_platform_config": {
                     "data": {
+                        "alarm_control_panel_code_mode": "Alarmcode validatie mode",
                         "climate_feature_action": "Huidige actie ondersteuning",
                         "climate_feature_current_humidity": "Huidige luchtvochtigheid ondersteuning",
                         "climate_feature_current_temperature": "Huidige temperatuur ondersteuning",
@@ -239,10 +241,12 @@
                         "schema": "Schema",
                         "state_class": "Statusklasse",
                         "suggested_display_precision": "Voorgestelde weergaveprecisie",
+                        "supported_features": "Ondersteunde functies",
                         "temperature_unit": "Temperatuureenheid",
                         "unit_of_measurement": "Meeteenheid"
                     },
                     "data_description": {
+                        "alarm_control_panel_code_mode": "Configureert hoe het alarmbedieningspaneel de code valideert. Een lokale code wordt geconfigureerd samen met de entiteit en wordt gevalideerd door Home Assistant. Een code op afstand wordt naar het apparaat verstuurd en wordt door het apparaat gevalideerd op afstand. [Leer meer.]({url}#code)",
                         "climate_feature_action": "De klimaatregeling ondersteunt het rapporteren van de huidige actie.",
                         "climate_feature_current_humidity": "De klimaatregeling ondersteunt het rapporteren van de huidige luchtvochtigheid.",
                         "climate_feature_current_temperature": "De klimaatregeling ondersteunt het rapporteren van de huidige temperatuur.",
@@ -263,6 +267,7 @@
                         "schema": "Het te gebruiken schema. [Leer meer.]({url}#comparison-of-light-mqtt-schemas)",
                         "state_class": "De [statusklasse](https://developers.home-assistant.io/docs/core/entity/sensor/#available-state-classes) van de sensor. [Leer meer.]({url}#state_class)",
                         "suggested_display_precision": "Het aantal decimalen dat gebruikt moet worden voor de \"{platform}\" entiteit status na afronding. [Leer meer.]({url}#suggested_display_precision)",
+                        "supported_features": "De functies die de entiteit ondersteunt",
                         "temperature_unit": "Dit bepaald de eigen meeteenheid waar het MQTT klimaatapparaat mee werkt.",
                         "unit_of_measurement": "Definieert de meeteenheid van de sensor, al die er is."
                     },
@@ -314,6 +319,11 @@
                     "data": {
                         "blue_template": "Blauw sjabloon",
                         "brightness_template": "Helderheid sjabloon",
+                        "code": "Alarmcode",
+                        "code_arm_required": "Code beveiliging uitschakelen vereist",
+                        "code_disarm_required": "Code beveiliging uitschakelen vereist",
+                        "code_format": "Code formaat",
+                        "code_trigger_required": "Code trigger vereist",
                         "color_temp_template": "Kleurtemperatuur sjabloon",
                         "command_off_template": "Commando \"uit\" sjabloon",
                         "command_on_template": "Commando \"aan\" sjabloon",
@@ -346,10 +356,14 @@
                     "data_description": {
                         "blue_template": "[Sjabloon](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) om de kleur blauw te extraheren van het status bericht. Verwacht resultaat van het sjabloon is een integer in binnen het bereik 0-255.",
                         "brightness_template": "[Sjabloon](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) om de helderheid te extraheren van het staus bericht. Verwachte resultaat van het sjabloon in een integer in het bereik 0-255.",
+                        "code": "Specificeert een code om het alarm in of uit te schakelen in de frontend. Let er op dat dit het versturen van MQTT berichten naar het apparaat op afstand blokkeert als de codevalidatie mislukt. [Leer meer.]({url}#code)",
+                        "code_arm_required": "Een code is verplicht wanneer om het alarm in te schakelen, wanneer dit is ingesteld, anders wordt de code niet gecontroleerd.",
+                        "code_disarm_required": "Een code is verplicht wanneer om het alarm uit te schakelen, wanneer dit is ingesteld, anders wordt de code niet gecontroleerd.",
+                        "code_format": "Een reguliere expressie om de slotcode te valideren wanneer deze wordt ingesteld bij het de actie om het MQTT slot te openen, te vergrendelen of te ontgrendelen. [Leer meer.]({url}#code_format)",
+                        "code_trigger_required": "Een code is verplicht wanneer om het alarm te triggeren, wanneer dit is ingesteld, anders wordt de code niet gecontroleerd.",
                         "color_temp_template": "[Sjabloon](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) om de kleurtemperatuur waarde te extraheren van het status bericht. De verwachte waarde van het sjabloon is een integer.",
                         "command_off_template": "Het [sjabloon](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) voor de \"uit\" statuswijzigingen. Beschikbare variabelen zijn: `state` en `transition`.",
                         "command_on_template": "Het [sjabloon](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) voor de \"aan\" statuswijzigingen. Beschikbare variabelen zijn: `state`, `brightness`, `color_temp`, `red`, `green`, `blue`, `hue`, `sat`, `flash`, `transition` en `effect`. Waarden van `red`, `green`, `blue` en `brightness` zijn beschikbaar als integers in het bereik 0-255. De waarde van `hue` is is een floating point getal in het bereik 0-360. De waarde van `sat` is een floating point getal in het bereik 0-100. Waarde van `color_temp` is is een integer in Kelvin.",
-                        "command_template": "Een [sjabloon](https://www.home-assistant.io/docs/configuration/templating/#using-command-templates-with-mqtt) om een payload te renderen om te publiceren via het commando topic.",
                         "command_topic": "Topic om de {platform} entiteit te besturen via publicatie. [Leer meer.]({url}#command_topic)",
                         "force_update": "Stuur update gebeurtenissen, ook als een ontvangen waarde niet is veranderd. Handig als je zinvolle grafieken in de geschiedenis wilt hebben. [Leer meer.]({url}#force_update)",
                         "green_template": "[Sjabloon](https://www.home-assistant.io/docs/configuration/templating/#using-value-templates-with-mqtt) om de kleur groen te extraheren van het status bericht. Verwacht resultaat van het sjabloon is een integer in binnen het bereik 0-255.",
@@ -399,6 +413,27 @@
                             },
                             "name": "Geavanceerde instellingen"
                         },
+                        "alarm_control_panel_payload_settings": {
+                            "data": {
+                                "payload_arm_away": "Bericht \"beveiligen niet thuis\"",
+                                "payload_arm_custom_bypass": "Bericht \"beveiligen aangepaste bypass\"",
+                                "payload_arm_disarm": "Bericht \"beveiliging uitgeschakeld\"",
+                                "payload_arm_home": "Bericht \"beveiligen huis\"",
+                                "payload_arm_night": "Bericht \"beveiligen nacht\"",
+                                "payload_arm_vacation": "Bericht \"beveiligen vakantie\"",
+                                "payload_trigger": "Bericht \"trigger alarm\""
+                            },
+                            "data_description": {
+                                "payload_arm_away": "Het bericht dat wordt verstuurd wanneer een \"beveiligen niet thuis\" commando is gegeven.",
+                                "payload_arm_custom_bypass": "Het bericht dat wordt verstuurd wanneer een \"beveiligen met aangepaste bypass\" commando is gegeven.",
+                                "payload_arm_disarm": "Het bericht dat wordt verstuurd wanneer een \"beveiliging uitschakelen\" commando is gegeven.",
+                                "payload_arm_home": "Het bericht dat wordt verstuurd wanneer een \"beveiligen huis\" commando is gegeven.",
+                                "payload_arm_night": "Het bericht dat wordt verstuurd wanneer een \"beveiligen nacht\" commando is gegeven.",
+                                "payload_arm_vacation": "Het bericht dat wordt verstuurd wanneer een \"beveiligen vakantie\" commando is gegeven.",
+                                "payload_trigger": "Het bericht dat wordt verstuurd wanneer een \"trigger alarm\" commando is gegeven."
+                            },
+                            "name": "Alarmbedieningspaneel berichtinstellingen"
+                        },
                         "climate_action_settings": {
                             "data": {
                                 "action_template": "Actie sjabloon",
@@ -808,6 +843,31 @@
                             },
                             "name": "XY kleurmodus instellingen"
                         },
+                        "lock_payload_settings": {
+                            "data": {
+                                "payload_lock": "Bericht \"vergrendelen\"",
+                                "payload_open": "Bericht \"openen\"",
+                                "payload_reset": "Bericht \"resetten\"",
+                                "payload_unlock": "Bericht \"ontgrendelen\"",
+                                "state_jammed": "Status \"vastgelopen\"",
+                                "state_locked": "Status \"vergrendeld\"",
+                                "state_locking": "Status \"vergrendelen\"",
+                                "state_unlocked": "Status \"ontgrendeld\"",
+                                "state_unlocking": "Status \"ontgrendelen\""
+                            },
+                            "data_description": {
+                                "payload_lock": "Het bericht dat wordt verstuurd wanneer een \"vergrendelen\" commando is gegeven.",
+                                "payload_open": "Het bericht dat wordt verstuurd wanneer een \"open\" commando is gegeven.",
+                                "payload_reset": "Het bericht ontvangen op status topic dat het slot reset naar een onbekende status.",
+                                "payload_unlock": "Het bericht dat wordt verstuurd wanneer een \"ontgrendelen\" commando is gegeven.",
+                                "state_jammed": "Het bericht ontvangen op status topic dat de \"vastgelopen\" status vertegenwoordigt.",
+                                "state_locked": "Het bericht ontvangen op status topic dat de \"vergrendeld\" status vertegenwoordigt.",
+                                "state_locking": "Het bericht ontvangen op status topic dat de \"vergrendelen\" status vertegenwoordigt.",
+                                "state_unlocked": "Het bericht ontvangen op status topic dat de \"ontgrendeld\" status vertegenwoordigt.",
+                                "state_unlocking": "Het bericht ontvangen op status topic dat de \"ontgrendelen\" status vertegenwoordigt."
+                            },
+                            "name": "Slot berichtinstellingen"
+                        },
                         "target_humidity_settings": {
                             "data": {
                                 "max_humidity": "Maximale luchtvochtigheid",
@@ -1074,6 +1134,23 @@
         }
     },
     "selector": {
+        "alarm_control_panel_code_mode": {
+            "options": {
+                "local_code": "Lokale code validatie",
+                "remote_code": "Numerieke validatie op afstand",
+                "remote_code_text": "Tekstcode validatie op afstand"
+            }
+        },
+        "alarm_control_panel_features": {
+            "options": {
+                "arm_away": "Inschakelen afwezig",
+                "arm_custom_bypass": "Inschakelen met overbrugging",
+                "arm_home": "Inschakelen thuis",
+                "arm_night": "Inschakelen voor 's nachts",
+                "arm_vacation": "Inschakelen vakantie",
+                "trigger": "Trigger"
+            }
+        },
         "climate_modes": {
             "options": {
                 "auto": "Automatisch",
@@ -1227,12 +1304,14 @@
         },
         "platform": {
             "options": {
+                "alarm_control_panel": "Alarmbedieningspaneel",
                 "binary_sensor": "Binaire sensor",
                 "button": "Knop",
                 "climate": "Klimaat",
                 "cover": "Raambekleding",
                 "fan": "Ventilator",
                 "light": "Licht",
+                "lock": "Slot",
                 "notify": "Notificaties",
                 "sensor": "Sensor",
                 "switch": "Schakelaar"
@@ -1321,16 +1400,16 @@
         }
     },
     "triggers": {
-        "mqtt": {
-            "description": "Welk specifiek bericht is ontvangen op het gegeven MQTT topic",
-            "description_configured": "Wanneer een MQTT bericht is ontvangen",
+        "_": {
+            "description": "Wanneer een specifiek bericht wordt ontvangen op een bepaald MQTT topic.",
+            "description_configured": "Wanneer een MQTT-bericht is ontvangen",
             "fields": {
                 "payload": {
-                    "description": "Het bericht om op te triggeren.",
-                    "name": "Bericht"
+                    "description": "De payload waarop getriggerd moet worden.",
+                    "name": "Payload"
                 },
                 "topic": {
-                    "description": "MQTT topic om naar te luisteren.",
+                    "description": "MQTT-topic om naar te luisteren.",
                     "name": "Topic"
                 }
             },