homeassistant 2025.7.1__py3-none-any.whl → 2025.7.3__py3-none-any.whl

homeassistant/components/nasweb/translations/en-GB.json

@@ -7,7 +7,7 @@
             "cannot_connect": "Failed to connect",
             "invalid_auth": "Invalid authentication",
             "missing_internal_url": "Make sure Home Assistant has a valid internal URL",
-            "missing_nasweb_data": "Something isn't right with device internal configuration. Try restarting the device and Home Assistant.",
+            "missing_nasweb_data": "Something isn't right with the device's internal configuration. Try restarting the device and Home Assistant.",
             "missing_status": "Did not receive any status updates within the expected time window. Make sure the Home Assistant internal URL is reachable from the NASweb device.",
             "unknown": "Unexpected error"
         },
@@ -26,22 +26,22 @@
     "entity": {
         "switch": {
             "switch_output": {
-                "name": "Relay Switch {index}"
+                "name": "Relay switch {index}"
             }
         }
     },
     "exceptions": {
         "config_entry_error_internal_error": {
-            "message": "Something isn't right with device internal configuration. Try restarting the device and Home Assistant. If the issue persists, contact support at {support_email}"
+            "message": "Something isn't right with the device's internal configuration. Try restarting the device and Home Assistant. If the issue persists contact support at {support_email}"
         },
         "config_entry_error_invalid_authentication": {
-            "message": "Invalid username/password. Most likely user changed password or was removed. Delete this entry and create a new one with the correct username/password."
+            "message": "Invalid username/password. Most likely the user has changed their password or has been removed. Delete this entry and create a new one with the correct username/password."
         },
         "config_entry_error_missing_internal_url": {
             "message": "Make sure Home Assistant has a valid internal URL"
         },
         "config_entry_error_no_status_update": {
-            "message": "Did not received any status updates within the expected time window. Make sure the Home Assistant internal URL is reachable from the NASweb device. If the issue persists contact support at {support_email}"
+            "message": "Did not receive any status updates within the expected time window. Make sure the Home Assistant internal URL is reachable from the NASweb device. If the issue persists contact support at {support_email}"
         },
         "serial_mismatch": {
             "message": "Connected to different NASweb device (serial number mismatch)."

homeassistant/components/nasweb/translations/en.json

@@ -7,7 +7,7 @@
             "cannot_connect": "Failed to connect",
             "invalid_auth": "Invalid authentication",
             "missing_internal_url": "Make sure Home Assistant has a valid internal URL",
-            "missing_nasweb_data": "Something isn't right with device internal configuration. Try restarting the device and Home Assistant.",
+            "missing_nasweb_data": "Something isn't right with the device's internal configuration. Try restarting the device and Home Assistant.",
             "missing_status": "Did not receive any status updates within the expected time window. Make sure the Home Assistant internal URL is reachable from the NASweb device.",
             "unknown": "Unexpected error"
         },
@@ -26,22 +26,22 @@
     "entity": {
         "switch": {
             "switch_output": {
-                "name": "Relay Switch {index}"
+                "name": "Relay switch {index}"
             }
         }
     },
     "exceptions": {
         "config_entry_error_internal_error": {
-            "message": "Something isn't right with device internal configuration. Try restarting the device and Home Assistant. If the issue persists contact support at {support_email}"
+            "message": "Something isn't right with the device's internal configuration. Try restarting the device and Home Assistant. If the issue persists contact support at {support_email}"
         },
         "config_entry_error_invalid_authentication": {
-            "message": "Invalid username/password. Most likely user changed password or was removed. Delete this entry and create a new one with the correct username/password."
+            "message": "Invalid username/password. Most likely the user has changed their password or has been removed. Delete this entry and create a new one with the correct username/password."
         },
         "config_entry_error_missing_internal_url": {
             "message": "Make sure Home Assistant has a valid internal URL"
         },
         "config_entry_error_no_status_update": {
-            "message": "Did not received any status updates within the expected time window. Make sure the Home Assistant internal URL is reachable from the NASweb device. If the issue persists contact support at {support_email}"
+            "message": "Did not receive any status updates within the expected time window. Make sure the Home Assistant internal URL is reachable from the NASweb device. If the issue persists contact support at {support_email}"
         },
         "serial_mismatch": {
             "message": "Connected to different NASweb device (serial number mismatch)."

homeassistant/components/nasweb/translations/es.json

@@ -7,7 +7,6 @@
             "cannot_connect": "No se pudo conectar",
             "invalid_auth": "Autenticaci\u00f3n no v\u00e1lida",
             "missing_internal_url": "Aseg\u00farate de que Home Assistant tenga una URL interna v\u00e1lida",
-            "missing_nasweb_data": "Hay alg\u00fan problema con la configuraci\u00f3n interna del dispositivo. Prueba a reiniciar el dispositivo y Home Assistant.",
             "missing_status": "No se ha recibido ninguna actualizaci\u00f3n de estado en el plazo previsto. Aseg\u00farate de que se puede acceder a la URL interna del Home Assistant desde el dispositivo NASweb.",
             "unknown": "Error inesperado"
         },
@@ -23,26 +22,10 @@
             }
         }
     },
-    "entity": {
-        "switch": {
-            "switch_output": {
-                "name": "Interruptor de rel\u00e9 {index}"
-            }
-        }
-    },
     "exceptions": {
-        "config_entry_error_internal_error": {
-            "message": "Hay alg\u00fan problema con la configuraci\u00f3n interna del dispositivo. Prueba a reiniciar el dispositivo y Home Assistant. Si el problema persiste, comun\u00edcate con el servicio de asistencia en {support_email}"
-        },
-        "config_entry_error_invalid_authentication": {
-            "message": "Nombre de usuario/contrase\u00f1a no v\u00e1lidos. Lo m\u00e1s probable es que el usuario haya cambiado la contrase\u00f1a o haya sido eliminado. Elimina esta entrada y crea una nueva con el nombre de usuario/contrase\u00f1a correctos."
-        },
         "config_entry_error_missing_internal_url": {
             "message": "Aseg\u00farate de que Home Assistant tenga una URL interna v\u00e1lida"
         },
-        "config_entry_error_no_status_update": {
-            "message": "No se ha recibido ninguna actualizaci\u00f3n de estado en el plazo previsto. Aseg\u00farate de que se puede acceder a la URL interna del Home Assistant desde el dispositivo NASweb. Si el problema persiste, ponte en contacto con el servicio de asistencia en {support_email}"
-        },
         "serial_mismatch": {
             "message": "Conectado a un dispositivo NASweb diferente (el n\u00famero de serie no coincide)."
         }

homeassistant/components/nasweb/translations/et.json

@@ -26,7 +26,7 @@
     "entity": {
         "switch": {
             "switch_output": {
-                "name": "Relay Switch {index}"
+                "name": "Relee l\u00fcliti {index}"
             }
         }
     },

homeassistant/components/nasweb/translations/ga.json

@@ -2,7 +2,6 @@
     "config": {
         "error": {
             "missing_internal_url": "Cinntigh go bhfuil URL inmhe\u00e1nach bail\u00ed ag C\u00fant\u00f3ir Baile",
-            "missing_nasweb_data": "T\u00e1 rud \u00e9igin cearr le cumra\u00edocht inmhe\u00e1nach an ghl\u00e9is. Bain triail as an ngl\u00e9as agus C\u00fant\u00f3ir Baile a atos\u00fa.",
             "missing_status": "N\u00ed bhfuair t\u00fa aon nuashonruithe st\u00e1dais laistigh den tr\u00e9imhse ama a bh\u00edothas ag s\u00fail leis. Cinntigh gur f\u00e9idir rochtain a fh\u00e1il ar URL inmhe\u00e1nach Home Assistant \u00f3n ngl\u00e9as NASweb."
         },
         "step": {
@@ -12,26 +11,10 @@
             }
         }
     },
-    "entity": {
-        "switch": {
-            "switch_output": {
-                "name": "Lasc Athsheachad\u00e1in {index}"
-            }
-        }
-    },
     "exceptions": {
-        "config_entry_error_internal_error": {
-            "message": "T\u00e1 rud \u00e9igin cearr le cumra\u00edocht inmhe\u00e1nach an ghl\u00e9is. Bain triail as an ngl\u00e9as agus Home Assistant a atos\u00fa. M\u00e1 leanann an fhadhb, d\u00e9an teagmh\u00e1il leis an taca\u00edocht ag {support_email}"
-        },
-        "config_entry_error_invalid_authentication": {
-            "message": "Ainm \u00fas\u00e1ideora/pasfhocal neamhbhail\u00ed. Is d\u00f3ich\u00ed gur athraigh an t-\u00fas\u00e1ideoir an pasfhocal n\u00f3 gur baineadh \u00e9. Scrios an iontr\u00e1il seo agus cruthaigh ceann nua leis an ainm \u00fas\u00e1ideora/pasfhocal ceart."
-        },
         "config_entry_error_missing_internal_url": {
             "message": "Cinntigh go bhfuil URL inmhe\u00e1nach bail\u00ed ag C\u00fant\u00f3ir Baile"
         },
-        "config_entry_error_no_status_update": {
-            "message": "N\u00ed bhfuair m\u00e9 aon nuashonruithe st\u00e1dais laistigh den tr\u00e9imhse ama a bh\u00edothas ag s\u00fail leis. Cinntigh gur f\u00e9idir rochtain a fh\u00e1il ar URL inmhe\u00e1nach Home Assistant \u00f3n ngl\u00e9as NASweb. M\u00e1 leanann an fhadhb ar aghaidh, d\u00e9an teagmh\u00e1il leis an taca\u00edocht ag {support_email}"
-        },
         "serial_mismatch": {
             "message": "Ceangailte le gl\u00e9as NASweb difri\u00fail (neamhoiri\u00fanacht uimhir sraitheach)."
         }

homeassistant/components/nasweb/translations/hu.json

@@ -7,7 +7,6 @@
             "cannot_connect": "Sikertelen csatlakoz\u00e1s",
             "invalid_auth": "\u00c9rv\u00e9nytelen hiteles\u00edt\u00e9s",
             "missing_internal_url": "Gy\u0151z\u0151dj\u00f6n meg r\u00f3la, hogy a Home Assistant \u00e9rv\u00e9nyes bels\u0151 URL-lel rendelkezik",
-            "missing_nasweb_data": "Valami nincs rendben az eszk\u00f6z bels\u0151 be\u00e1ll\u00edt\u00e1saival. Pr\u00f3b\u00e1lja \u00fajraind\u00edtani az eszk\u00f6zt \u00e9s a Home Assistantot.",
             "missing_status": "Nem \u00e9rkezett \u00e1llapotfriss\u00edt\u00e9s a v\u00e1rhat\u00f3 id\u0151ablakon bel\u00fcl. Gy\u0151z\u0151dj\u00f6n meg r\u00f3la, hogy a Home Assistant bels\u0151 URL el\u00e9rhet\u0151 a NASweb eszk\u00f6z sz\u00e1m\u00e1ra.",
             "unknown": "V\u00e1ratlan hiba"
         },
@@ -23,26 +22,10 @@
             }
         }
     },
-    "entity": {
-        "switch": {
-            "switch_output": {
-                "name": "Rel\u00e9kapcsol\u00f3 {index}"
-            }
-        }
-    },
     "exceptions": {
-        "config_entry_error_internal_error": {
-            "message": "Valami probl\u00e9ma van az eszk\u00f6z bels\u0151 konfigur\u00e1ci\u00f3j\u00e1val. Pr\u00f3b\u00e1lja meg \u00fajraind\u00edtani az eszk\u00f6zt \u00e9s a HomeAssistant rendszert. Ha a probl\u00e9ma tov\u00e1bbra is fenn\u00e1ll, vegye fel a kapcsolatot a t\u00e1mogat\u00e1ssal a(z) {support_email} c\u00edmen."
-        },
-        "config_entry_error_invalid_authentication": {
-            "message": "\u00c9rv\u00e9nytelen felhaszn\u00e1l\u00f3n\u00e9v/jelsz\u00f3. Val\u00f3sz\u00edn\u0171leg a felhaszn\u00e1l\u00f3 megv\u00e1ltoztatta a jelszav\u00e1t vagy t\u00f6r\u00f6lve lett. T\u00f6r\u00f6lje ezt a bejegyz\u00e9st \u00e9s hozzon l\u00e9tre egy \u00fajat a helyes felhaszn\u00e1l\u00f3n\u00e9vvel \u00e9s jelsz\u00f3val."
-        },
         "config_entry_error_missing_internal_url": {
             "message": "Gy\u0151z\u0151dj\u00f6n meg r\u00f3la, hogy a Home Assistant \u00e9rv\u00e9nyes bels\u0151 URL-lel rendelkezik"
         },
-        "config_entry_error_no_status_update": {
-            "message": "Nem \u00e9rkezett \u00e1llapotfriss\u00edt\u00e9s a v\u00e1rhat\u00f3 id\u0151ablakon bel\u00fcl. Gy\u0151z\u0151dj\u00f6n meg r\u00f3la, hogy a Home Assistant bels\u0151 URL el\u00e9rhet\u0151 a NASweb eszk\u00f6z sz\u00e1m\u00e1ra. Ha a probl\u00e9ma tov\u00e1bbra is fenn\u00e1ll, vegye fel a kapcsolatot a t\u00e1mogat\u00e1ssal a(z) {support_email} c\u00edmen."
-        },
         "serial_mismatch": {
             "message": "Egy m\u00e1sik NASweb eszk\u00f6zh\u00f6z csatlakozott (sorozatsz\u00e1m elt\u00e9r\u00e9s)."
         }

homeassistant/components/nasweb/translations/ja.json

@@ -7,7 +7,6 @@
             "cannot_connect": "\u63a5\u7d9a\u306b\u5931\u6557\u3057\u307e\u3057\u305f",
             "invalid_auth": "\u7121\u52b9\u306a\u8a8d\u8a3c",
             "missing_internal_url": "Home Assistant\u306b\u6709\u52b9\u306a\u5185\u90e8URL\u304c\u3042\u308b\u3053\u3068\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044",
-            "missing_nasweb_data": "\u30c7\u30d0\u30a4\u30b9\u306e\u5185\u90e8\u69cb\u6210\u306b\u554f\u984c\u304c\u3042\u308a\u307e\u3059\u3002\u30c7\u30d0\u30a4\u30b9\u3068 Home Assistant \u3092\u518d\u8d77\u52d5\u3057\u3066\u307f\u3066\u304f\u3060\u3055\u3044\u3002",
             "missing_status": "\u4e88\u60f3\u3055\u308c\u305f\u6642\u9593\u67a0\u5185\u306b\u30b9\u30c6\u30fc\u30bf\u30b9\u306e\u66f4\u65b0\u3092\u53d7\u4fe1\u3057\u307e\u305b\u3093\u3067\u3057\u305f\u3002Home Assistant \u306e\u5185\u90e8 URL \u304c NASweb \u30c7\u30d0\u30a4\u30b9\u304b\u3089\u30a2\u30af\u30bb\u30b9\u3067\u304d\u308b\u3053\u3068\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044\u3002",
             "unknown": "\u4e88\u671f\u3057\u306a\u3044\u30a8\u30e9\u30fc"
         },
@@ -23,26 +22,10 @@
             }
         }
     },
-    "entity": {
-        "switch": {
-            "switch_output": {
-                "name": "\u30ea\u30ec\u30fc\u30b9\u30a4\u30c3\u30c1{index}"
-            }
-        }
-    },
     "exceptions": {
-        "config_entry_error_internal_error": {
-            "message": "\u30c7\u30d0\u30a4\u30b9\u306e\u5185\u90e8\u69cb\u6210\u306b\u554f\u984c\u304c\u3042\u308a\u307e\u3059\u3002\u30c7\u30d0\u30a4\u30b9\u3068 Home Assistant \u3092\u518d\u8d77\u52d5\u3057\u3066\u304f\u3060\u3055\u3044\u3002\u554f\u984c\u304c\u89e3\u6c7a\u3057\u306a\u3044\u5834\u5408\u306f\u3001\u30b5\u30dd\u30fc\u30c8{support_email}\u306b\u304a\u554f\u3044\u5408\u308f\u305b\u304f\u3060\u3055\u3044\u3002"
-        },
-        "config_entry_error_invalid_authentication": {
-            "message": "\u30e6\u30fc\u30b6\u30fc\u540d/\u30d1\u30b9\u30ef\u30fc\u30c9\u304c\u7121\u52b9\u3067\u3059\u3002\u30e6\u30fc\u30b6\u30fc\u304c\u30d1\u30b9\u30ef\u30fc\u30c9\u3092\u5909\u66f4\u3057\u305f\u304b\u3001\u524a\u9664\u3055\u308c\u305f\u53ef\u80fd\u6027\u304c\u3042\u308a\u307e\u3059\u3002\u3053\u306e\u30a8\u30f3\u30c8\u30ea\u3092\u524a\u9664\u3057\u3001\u6b63\u3057\u3044\u30e6\u30fc\u30b6\u30fc\u540d/\u30d1\u30b9\u30ef\u30fc\u30c9\u3067\u65b0\u3057\u3044\u30a8\u30f3\u30c8\u30ea\u3092\u4f5c\u6210\u3057\u3066\u304f\u3060\u3055\u3044\u3002"
-        },
         "config_entry_error_missing_internal_url": {
             "message": "Home Assistant\u306b\u6709\u52b9\u306a\u5185\u90e8URL\u304c\u3042\u308b\u3053\u3068\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044"
         },
-        "config_entry_error_no_status_update": {
-            "message": "\u4e88\u60f3\u3055\u308c\u305f\u6642\u9593\u67a0\u5185\u306b\u30b9\u30c6\u30fc\u30bf\u30b9\u306e\u66f4\u65b0\u3092\u53d7\u4fe1\u3057\u307e\u305b\u3093\u3067\u3057\u305f\u3002Home Assistant \u306e\u5185\u90e8 URL \u304c NASweb \u30c7\u30d0\u30a4\u30b9\u304b\u3089\u30a2\u30af\u30bb\u30b9\u3067\u304d\u308b\u3053\u3068\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044\u3002\u554f\u984c\u304c\u89e3\u6c7a\u3057\u306a\u3044\u5834\u5408\u306f\u3001 {support_email}\u307e\u3067\u30b5\u30dd\u30fc\u30c8\u306b\u304a\u554f\u3044\u5408\u308f\u305b\u304f\u3060\u3055\u3044\u3002"
-        },
         "serial_mismatch": {
             "message": "\u5225\u306e NASweb \u30c7\u30d0\u30a4\u30b9\u306b\u63a5\u7d9a\u3055\u308c\u3066\u3044\u307e\u3059 (\u30b7\u30ea\u30a2\u30eb\u756a\u53f7\u304c\u4e00\u81f4\u3057\u307e\u305b\u3093)\u3002"
         }

homeassistant/components/nasweb/translations/lt.json

@@ -7,7 +7,7 @@
             "cannot_connect": "Nepavyko prisijungti",
             "invalid_auth": "Neteisingas autentifikavimas",
             "missing_internal_url": "\u012esitikinkite, kad \u201eHome Assistant\u201c turi galiojant\u012f vidin\u012f URL",
-            "missing_nasweb_data": "Ka\u017ekas negerai d\u0117l \u012frenginio vidin\u0117s konfig\u016bracijos. Pabandykite i\u0161 naujo paleisti \u012frengin\u012f ir \u201eHome Assistant\u201c.",
+            "missing_nasweb_data": "\u012erenginio vidin\u0117je konfig\u016bracijoje yra ka\u017ekas negerai. Pabandykite paleisti \u012frengin\u012f ir Home Assistant i\u0161 naujo.",
             "missing_status": "Per numatyt\u0105 laikotarp\u012f negavote joki\u0173 b\u016bsenos atnaujinim\u0173. \u012esitikinkite, kad \u201eHome Assistant\u201c vidinis URL pasiekiamas i\u0161 NASweb \u012frenginio.",
             "unknown": "Netik\u0117ta klaida"
         },
@@ -32,16 +32,16 @@
     },
     "exceptions": {
         "config_entry_error_internal_error": {
-            "message": "Ka\u017ekas negerai d\u0117l \u012frenginio vidin\u0117s konfig\u016bracijos. Pabandykite i\u0161 naujo paleisti \u012frengin\u012f ir \u201eHome Assistant\u201c. Jei problema i\u0161lieka, susisiekite su palaikymo komanda adresu {support_email}"
+            "message": "\u012erenginio vidin\u0117je konfig\u016bracijoje yra problem\u0173. Pabandykite paleisti \u012frengin\u012f ir Home Assistant i\u0161 naujo. Jei problema i\u0161lieka, susisiekite su palaikymo tarnyba adresu {support_email}"
         },
         "config_entry_error_invalid_authentication": {
-            "message": "Neteisingas vartotojo vardas/slapta\u017eodis. Grei\u010diausiai vartotojas pakeit\u0117 slapta\u017eod\u012f arba buvo pa\u0161alintas. I\u0161trinkite \u0161\u012f \u012fra\u0161\u0105 ir sukurkite nauj\u0105 su teisingu vartotojo vardu/slapta\u017eod\u017eiu."
+            "message": "Neteisingas vartotojo vardas / slapta\u017eodis. Labiausiai tik\u0117tina, kad vartotojas pakeit\u0117 slapta\u017eod\u012f arba buvo pa\u0161alintas. I\u0161trinkite \u0161\u012f \u012fra\u0161\u0105 ir sukurkite nauj\u0105 su teisingu vartotojo vardu / slapta\u017eod\u017eiu."
         },
         "config_entry_error_missing_internal_url": {
             "message": "\u012esitikinkite, kad \u201eHome Assistant\u201c turi galiojant\u012f vidin\u012f URL"
         },
         "config_entry_error_no_status_update": {
-            "message": "Per numatyt\u0105 laikotarp\u012f negavote joki\u0173 b\u016bsenos atnaujinim\u0173. \u012esitikinkite, kad \u201eHome Assistant\u201c vidinis URL pasiekiamas i\u0161 NASweb \u012frenginio. Jei problema i\u0161lieka, susisiekite su palaikymo komanda adresu {support_email}"
+            "message": "Per numatyt\u0105 laik\u0105 negavau joki\u0173 b\u016bsenos atnaujinim\u0173. \u012esitikinkite, kad Home Assistant vidinis URL pasiekiamas i\u0161 NASweb \u012frenginio. Jei problema i\u0161lieka, susisiekite su palaikymo tarnyba adresu {support_email}"
         },
         "serial_mismatch": {
             "message": "Prijungtas prie kito NASweb \u012frenginio (serijos numerio neatitikimas)."

homeassistant/components/nasweb/translations/nb.json

@@ -0,0 +1 @@
+{}

homeassistant/components/nasweb/translations/nl.json

@@ -17,10 +17,5 @@
                 }
             }
         }
-    },
-    "exceptions": {
-        "config_entry_error_no_status_update": {
-            "message": "Geen statusupdates ontvangen binnen het verwachte tijdsbestek. Controleer of de interne URL van Home Assistant bereikbaar is vanaf het NASweb-apparaat. Als het probleem zich blijft voordoen, neem dan contact op met support via {support_email}"
-        }
     }
 }

homeassistant/components/nasweb/translations/nn.json

@@ -0,0 +1 @@
+{}

homeassistant/components/nasweb/translations/pt.json

@@ -7,7 +7,6 @@
             "cannot_connect": "A liga\u00e7\u00e3o falhou",
             "invalid_auth": "Autentica\u00e7\u00e3o inv\u00e1lida",
             "missing_internal_url": "Certifique-se de que o Home Assistant tem um URL interno v\u00e1lido",
-            "missing_nasweb_data": "Algo n\u00e3o est\u00e1 certo com a configura\u00e7\u00e3o interna do dispositivo. Tente reiniciar o dispositivo e o Home Assistant.",
             "missing_status": "N\u00e3o recebeu nenhuma atualiza\u00e7\u00e3o de status dentro do tempo esperado. Certifique-se de que o URL interno do Home Assistant \u00e9 acess\u00edvel a partir do dispositivo NASweb.",
             "unknown": "Erro inesperado"
         },
@@ -23,26 +22,10 @@
             }
         }
     },
-    "entity": {
-        "switch": {
-            "switch_output": {
-                "name": "Interruptor de rel\u00e9 {index}"
-            }
-        }
-    },
     "exceptions": {
-        "config_entry_error_internal_error": {
-            "message": "Algo n\u00e3o est\u00e1 certo com a configura\u00e7\u00e3o interna do dispositivo. Tente reiniciar o dispositivo e o Home Assistant. Se o problema persistir, entre em contacto com o suporte em {support_email}"
-        },
-        "config_entry_error_invalid_authentication": {
-            "message": "Nome de utilizador/palavra-passe inv\u00e1lidos. Provavelmente o utilizador alterou a palavra-passe ou foi removido. Elimine esta entrada e crie uma nova com o nome de utilizador/palavra-passe corretos."
-        },
         "config_entry_error_missing_internal_url": {
             "message": "Certifique-se de que o Home Assistant tem um URL interno v\u00e1lido"
         },
-        "config_entry_error_no_status_update": {
-            "message": "N\u00e3o recebeu nenhuma atualiza\u00e7\u00e3o de status dentro do tempo esperado. Certifique-se de que o URL interno do Home Assistant \u00e9 acess\u00edvel a partir do dispositivo NASweb. Se o problema persistir, entre em contacto com o suporte em {support_email}"
-        },
         "serial_mismatch": {
             "message": "Ligado a um dispositivo NASWeb diferente (o n\u00famero de s\u00e9rie n\u00e3o corresponde)"
         }

homeassistant/components/nasweb/translations/sv.json

@@ -31,18 +31,9 @@
         }
     },
     "exceptions": {
-        "config_entry_error_internal_error": {
-            "message": "Det \u00e4r n\u00e5got som inte st\u00e4mmer med enhetens interna konfiguration. F\u00f6rs\u00f6k att starta om enheten och Home Assistant. Om problemet kvarst\u00e5r, kontakta support p\u00e5 {support_email}"
-        },
-        "config_entry_error_invalid_authentication": {
-            "message": "Ogiltigt anv\u00e4ndarnamn/l\u00f6senord. Troligen har anv\u00e4ndaren bytt l\u00f6senord eller tagits bort. Ta bort den h\u00e4r posten och skapa en ny med korrekt anv\u00e4ndarnamn/l\u00f6senord."
-        },
         "config_entry_error_missing_internal_url": {
             "message": "Kontrollera att Home Assistant har en giltig intern webbadress"
         },
-        "config_entry_error_no_status_update": {
-            "message": "Fick inte n\u00e5gra statusuppdateringar inom det f\u00f6rv\u00e4ntade tidsf\u00f6nstret. Kontrollera att Home Assistants interna URL \u00e4r n\u00e5bar fr\u00e5n NASweb-enheten. Om problemet kvarst\u00e5r, kontakta support p\u00e5 {support_email}"
-        },
         "serial_mismatch": {
             "message": "Ansluten till en annan NASweb-enhet (serienumret st\u00e4mmer inte \u00f6verens)."
         }

homeassistant/components/nasweb/translations/tr.json

@@ -7,7 +7,6 @@
             "cannot_connect": "Ba\u011flanma hatas\u0131",
             "invalid_auth": "Ge\u00e7ersiz kimlik do\u011frulama",
             "missing_internal_url": "Home Assistant'\u0131n ge\u00e7erli bir dahili URL'ye sahip oldu\u011fundan emin olun",
-            "missing_nasweb_data": "Cihaz\u0131n dahili yap\u0131land\u0131rmas\u0131nda bir sorun var. Cihaz\u0131 ve Home Assistant'\u0131 yeniden ba\u015flatmay\u0131 deneyin.",
             "missing_status": "Beklenen zaman aral\u0131\u011f\u0131nda herhangi bir durum g\u00fcncellemesi al\u0131nmad\u0131. Home Assistant dahili URL'sinin NASweb cihaz\u0131ndan eri\u015filebilir oldu\u011fundan emin olun.",
             "unknown": "Beklenmeyen hata"
         },
@@ -23,26 +22,10 @@
             }
         }
     },
-    "entity": {
-        "switch": {
-            "switch_output": {
-                "name": "R\u00f6le Anahtar\u0131 {index}"
-            }
-        }
-    },
     "exceptions": {
-        "config_entry_error_internal_error": {
-            "message": "Cihaz\u0131n dahili yap\u0131land\u0131rmas\u0131nda bir sorun var. Cihaz\u0131 ve Home Assistant'\u0131 yeniden ba\u015flatmay\u0131 deneyin. Sorun devam ederse {support_email} adresinden destekle ileti\u015fime ge\u00e7in"
-        },
-        "config_entry_error_invalid_authentication": {
-            "message": "Ge\u00e7ersiz kullan\u0131c\u0131 ad\u0131/\u015fifre. B\u00fcy\u00fck olas\u0131l\u0131kla kullan\u0131c\u0131 \u015fifreyi de\u011fi\u015ftirmi\u015f veya kald\u0131r\u0131lm\u0131\u015ft\u0131r. Bu giri\u015fi silin ve do\u011fru kullan\u0131c\u0131 ad\u0131/\u015fifre ile yeni bir tane olu\u015fturun."
-        },
         "config_entry_error_missing_internal_url": {
             "message": "Home Assistant'\u0131n ge\u00e7erli bir dahili URL'ye sahip oldu\u011fundan emin olun"
         },
-        "config_entry_error_no_status_update": {
-            "message": "Beklenen zaman aral\u0131\u011f\u0131nda herhangi bir durum g\u00fcncellemesi al\u0131nmad\u0131. Home Assistant dahili URL'sinin NASweb cihaz\u0131ndan eri\u015filebilir oldu\u011fundan emin olun. Sorun devam ederse {support_email} adresinden destek ekibiyle ileti\u015fime ge\u00e7in"
-        },
         "serial_mismatch": {
             "message": "Farkl\u0131 bir NASweb cihaz\u0131na ba\u011fland\u0131 (seri numaras\u0131 uyu\u015fmuyor)."
         }

homeassistant/components/nasweb/translations/zh-Hans.json

@@ -32,16 +32,16 @@
     },
     "exceptions": {
         "config_entry_error_internal_error": {
-            "message": "\u8bbe\u5907\u5185\u90e8\u914d\u7f6e\u6709\u95ee\u9898\u3002\u8bf7\u5c1d\u8bd5\u91cd\u542f\u8bbe\u5907\u548c Home Assistant \u3002\u5982\u679c\u95ee\u9898\u4ecd\u7136\u5b58\u5728\uff0c\u8bf7\u8054\u7cfb {support_email} \u7684\u652f\u6301\u4eba\u5458"
+            "message": "\u8bbe\u5907\u5185\u90e8\u914d\u7f6e\u6709\u95ee\u9898\u3002\u8bf7\u5c1d\u8bd5\u91cd\u542f\u8bbe\u5907\u548c Home Assistant \u3002\u5982\u679c\u95ee\u9898\u4ecd\u7136\u5b58\u5728\uff0c\u8bf7\u8054\u7cfb {support_email} \u652f\u6301\u4eba\u5458"
         },
         "config_entry_error_invalid_authentication": {
-            "message": "\u7528\u6237\u540d/\u5bc6\u7801\u65e0\u6548\u3002\u5f88\u53ef\u80fd\u662f\u7528\u6237\u66f4\u6539\u4e86\u5bc6\u7801\u6216\u8005\u5bc6\u7801\u88ab\u79fb\u9664\u4e86\u3002\u5220\u9664\u6b64\u6761\u76ee\u5e76\u4f7f\u7528\u6b63\u786e\u7684\u7528\u6237\u540d/\u5bc6\u7801\u521b\u5efa\u65b0\u6761\u76ee\u3002"
+            "message": "\u7528\u6237\u540d/\u5bc6\u7801\u65e0\u6548\u3002\u5f88\u53ef\u80fd\u662f\u7528\u6237\u5df2\u66f4\u6539\u5bc6\u7801\u6216\u5df2\u88ab\u79fb\u9664\u3002\u8bf7\u5220\u9664\u6b64\u6761\u76ee\uff0c\u5e76\u4f7f\u7528\u6b63\u786e\u7684\u7528\u6237\u540d/\u5bc6\u7801\u521b\u5efa\u65b0\u7684\u7528\u6237\u540d/\u5bc6\u7801\u3002"
         },
         "config_entry_error_missing_internal_url": {
             "message": "\u786e\u4fdd Home Assistant \u5177\u6709\u6709\u6548\u7684\u5185\u90e8\u7f51\u5740"
         },
         "config_entry_error_no_status_update": {
-            "message": "\u5728\u9884\u671f\u7684\u65f6\u95f4\u8303\u56f4\u5185\u672a\u6536\u5230\u4efb\u4f55\u72b6\u6001\u66f4\u65b0\u3002\u8bf7\u786e\u4fdd\u53ef\u4ece NASweb \u8bbe\u5907\u8bbf\u95ee Home Assistant \u5185\u90e8\u7f51\u5740\u3002\u5982\u679c\u95ee\u9898\u4ecd\u7136\u5b58\u5728\uff0c\u8bf7\u7528 {support_email} \u8054\u7cfb\u652f\u6301\u4eba\u5458"
+            "message": "\u5728\u9884\u671f\u65f6\u95f4\u5185\u672a\u6536\u5230\u4efb\u4f55\u72b6\u6001\u66f4\u65b0\u3002\u8bf7\u786e\u4fdd NASweb \u8bbe\u5907\u53ef\u4ee5\u8bbf\u95ee Home Assistant \u5185\u90e8\u7f51\u5740\u3002\u5982\u679c\u95ee\u9898\u4ecd\u7136\u5b58\u5728\uff0c\u8bf7\u8054\u7cfb {support_email} \u652f\u6301\u56e2\u961f"
         },
         "serial_mismatch": {
             "message": "\u8fde\u63a5\u5230\u4e0d\u540c\u7684 NASweb \u8bbe\u5907\uff08\u5e8f\u5217\u53f7\u4e0d\u5339\u914d\uff09\u3002"

homeassistant/components/neato/translations/el.json

@@ -48,16 +48,26 @@
     },
     "services": {
         "custom_cleaning": {
+            "description": "\u039e\u03b5\u03ba\u03b9\u03bd\u03ac \u03ad\u03bd\u03b1\u03bd \u03c0\u03c1\u03bf\u03c3\u03b1\u03c1\u03bc\u03bf\u03c3\u03bc\u03ad\u03bd\u03bf \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03cc \u03c4\u03bf\u03c5 \u03c3\u03c0\u03b9\u03c4\u03b9\u03bf\u03cd \u03c3\u03b1\u03c2.",
             "fields": {
                 "category": {
                     "description": "\u0391\u03bd \u03b8\u03b1 \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b7\u03b8\u03b5\u03af \u03ae \u03cc\u03c7\u03b9 \u03ad\u03bd\u03b1\u03c2 \u03bc\u03cc\u03bd\u03b9\u03bc\u03bf\u03c2 \u03c7\u03ac\u03c1\u03c4\u03b7\u03c2 \u03b3\u03b9\u03b1 \u03c4\u03bf\u03bd \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03cc (\u03c0.\u03c7. \u03b1\u03c0\u03b1\u03b3\u03bf\u03c1\u03b5\u03c5\u03c4\u03b9\u03ba\u03ad\u03c2 \u03b3\u03c1\u03b1\u03bc\u03bc\u03ad\u03c2): 2 \u03b3\u03b9\u03b1 \u03bc\u03b7 \u03cd\u03c0\u03b1\u03c1\u03be\u03b7 \u03c7\u03ac\u03c1\u03c4\u03b7, 4 \u03b3\u03b9\u03b1 \u03c7\u03ac\u03c1\u03c4\u03b7. \u03a0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae \u03c3\u03c4\u03b7 \u03c7\u03c1\u03ae\u03c3\u03b7 \u03c7\u03ac\u03c1\u03c4\u03b7 \u03b1\u03bd \u03b4\u03b5\u03bd \u03ad\u03c7\u03b5\u03b9 \u03bf\u03c1\u03b9\u03c3\u03c4\u03b5\u03af (\u03ba\u03b1\u03b9 \u03b5\u03c0\u03b1\u03bd\u03b1\u03c6\u03bf\u03c1\u03ac \u03c3\u03b5 \u03bc\u03b7 \u03cd\u03c0\u03b1\u03c1\u03be\u03b7 \u03c7\u03ac\u03c1\u03c4\u03b7 \u03b1\u03bd \u03b4\u03b5\u03bd \u03b2\u03c1\u03b5\u03b8\u03b5\u03af).",
                     "name": "\u03a7\u03c1\u03ae\u03c3\u03b7 \u03c7\u03ac\u03c1\u03c4\u03b7 \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03bf\u03cd"
                 },
+                "mode": {
+                    "description": "\u039f\u03c1\u03af\u03b6\u03b5\u03b9 \u03c4\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03bf\u03cd: 1 \u03b3\u03b9\u03b1 \u03bf\u03b9\u03ba\u03bf\u03bd\u03bf\u03bc\u03b9\u03ba\u03cc \u03ba\u03b1\u03b9 2 \u03b3\u03b9\u03b1 turbo. \u0391\u03bd \u03b4\u03b5\u03bd \u03ad\u03c7\u03b5\u03b9 \u03bf\u03c1\u03b9\u03c3\u03c4\u03b5\u03af, \u03b7 \u03c0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae \u03b5\u03af\u03bd\u03b1\u03b9 turbo.",
+                    "name": "\u039b\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03bf\u03cd"
+                },
+                "navigation": {
+                    "description": "\u039f\u03c1\u03af\u03b6\u03b5\u03b9 \u03c4\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03bb\u03bf\u03ae\u03b3\u03b7\u03c3\u03b7\u03c2: 1 \u03b3\u03b9\u03b1 \u03ba\u03b1\u03bd\u03bf\u03bd\u03b9\u03ba\u03ae, 2 \u03b3\u03b9\u03b1 \u03b5\u03c0\u03b9\u03c0\u03bb\u03ad\u03bf\u03bd \u03c6\u03c1\u03bf\u03bd\u03c4\u03af\u03b4\u03b1, 3 \u03b3\u03b9\u03b1 \u03b2\u03b1\u03b8\u03b9\u03ac. \u0391\u03bd \u03b4\u03b5\u03bd \u03bf\u03c1\u03b9\u03c3\u03c4\u03b5\u03af, \u03b7 \u03c0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae \u03b5\u03af\u03bd\u03b1\u03b9 \u03ba\u03b1\u03bd\u03bf\u03bd\u03b9\u03ba\u03ae.",
+                    "name": "\u039b\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03bb\u03bf\u03ae\u03b3\u03b7\u03c3\u03b7\u03c2"
+                },
                 "zone": {
                     "description": "\u039f\u03bd\u03bf\u03bc\u03b1 \u03c4\u03b7\u03c2 \u03b6\u03ce\u03bd\u03b7\u03c2 \u03c0\u03c1\u03bf\u03c2 \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03cc (\u03c5\u03c0\u03bf\u03c3\u03c4\u03b7\u03c1\u03af\u03b6\u03b5\u03c4\u03b1\u03b9 \u03bc\u03cc\u03bd\u03bf \u03c3\u03c4\u03bf Botvac D7). \u0397 \u03c0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03bf\u03b3\u03ae \u03b5\u03af\u03bd\u03b1\u03b9 \u03c7\u03c9\u03c1\u03af\u03c2 \u03b6\u03ce\u03bd\u03b7, \u03b4\u03b7\u03bb\u03b1\u03b4\u03ae \u03c0\u03bb\u03ae\u03c1\u03b7\u03c2 \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03cc\u03c2 \u03c4\u03bf\u03c5 \u03c3\u03c0\u03b9\u03c4\u03b9\u03bf\u03cd.",
                     "name": "\u0396\u03ce\u03bd\u03b7"
                 }
-            }
+            },
+            "name": "\u03a0\u03c1\u03bf\u03c3\u03b1\u03c1\u03bc\u03bf\u03c3\u03bc\u03ad\u03bd\u03bf\u03c2 \u03ba\u03b1\u03b8\u03b1\u03c1\u03b9\u03c3\u03bc\u03cc\u03c2"
         }
     }
 }

homeassistant/components/nest/translations/el.json

@@ -61,6 +61,11 @@
                 "description": "\u039f\u03b9 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ad\u03c2 Nest \u03b4\u03b7\u03bc\u03bf\u03c3\u03b9\u03b5\u03cd\u03bf\u03c5\u03bd \u03b5\u03bd\u03b7\u03bc\u03b5\u03c1\u03ce\u03c3\u03b5\u03b9\u03c2 \u03c3\u03b5 \u03ad\u03bd\u03b1 Cloud Pub/Sub topic. \u039c\u03c0\u03bf\u03c1\u03b5\u03af\u03c4\u03b5 \u03bd\u03b1 \u03b5\u03c0\u03b9\u03bb\u03ad\u03be\u03b5\u03c4\u03b5 \u03ad\u03bd\u03b1 \u03c5\u03c0\u03ac\u03c1\u03c7\u03bf\u03bd topic, \u03b1\u03bd \u03c5\u03c0\u03ac\u03c1\u03c7\u03b5\u03b9, \u03ae \u03bd\u03b1 \u03b5\u03c0\u03b9\u03bb\u03ad\u03be\u03b5\u03c4\u03b5 \u03bd\u03b1 \u03b4\u03b7\u03bc\u03b9\u03bf\u03c5\u03c1\u03b3\u03ae\u03c3\u03b5\u03c4\u03b5 \u03ad\u03bd\u03b1 \u03bd\u03ad\u03bf \u03b8\u03ad\u03bc\u03b1 \u03ba\u03b1\u03b9 \u03c4\u03bf \u03b5\u03c0\u03cc\u03bc\u03b5\u03bd\u03bf \u03b2\u03ae\u03bc\u03b1 \u03b8\u03b1 \u03c4\u03bf \u03b4\u03b7\u03bc\u03b9\u03bf\u03c5\u03c1\u03b3\u03ae\u03c3\u03b5\u03b9 \u03b3\u03b9\u03b1 \u03b5\u03c3\u03ac\u03c2 \u03bc\u03b5 \u03c4\u03b1 \u03b1\u03c0\u03b1\u03c1\u03b1\u03af\u03c4\u03b7\u03c4\u03b1 \u03b4\u03b9\u03ba\u03b1\u03b9\u03ce\u03bc\u03b1\u03c4\u03b1. \u0391\u03bd\u03b1\u03c4\u03c1\u03ad\u03be\u03c4\u03b5 \u03c3\u03c4\u03b7\u03bd \u03c4\u03b5\u03ba\u03bc\u03b7\u03c1\u03af\u03c9\u03c3\u03b7 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7\u03c2 \u03b3\u03b9\u03b1 [\u03c0\u03b5\u03c1\u03b9\u03c3\u03c3\u03cc\u03c4\u03b5\u03c1\u03b5\u03c2 \u03c0\u03bb\u03b7\u03c1\u03bf\u03c6\u03bf\u03c1\u03af\u03b5\u03c2]({more_info_url}).",
                 "title": "\u0394\u03b9\u03b1\u03bc\u03cc\u03c1\u03c6\u03c9\u03c3\u03b7 \u03b8\u03ad\u03bc\u03b1\u03c4\u03bf\u03c2 Cloud Pub/Sub"
             },
+            "pubsub_topic_confirm": {
+                "description": "\u03a4\u03bf Nest Device Access Console \u03c0\u03c1\u03ad\u03c0\u03b5\u03b9 \u03bd\u03b1 \u03c1\u03c5\u03b8\u03bc\u03b9\u03c3\u03c4\u03b5\u03af \u03ce\u03c3\u03c4\u03b5 \u03bd\u03b1 \u03b4\u03b7\u03bc\u03bf\u03c3\u03b9\u03b5\u03cd\u03b5\u03b9 \u03c3\u03c5\u03bc\u03b2\u03ac\u03bd\u03c4\u03b1 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ce\u03bd \u03c3\u03c4\u03bf Pub/Sub topic.\n\n1. \u0395\u03c0\u03b9\u03c3\u03ba\u03b5\u03c6\u03c4\u03b5\u03af\u03c4\u03b5 \u03c4\u03bf [Device Access Console]({device_access_console_url}).\n2. \u0391\u03bd\u03bf\u03af\u03be\u03c4\u03b5 \u03c4\u03bf \u03ad\u03c1\u03b3\u03bf.\n3. \u0395\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03b9\u03ae\u03c3\u03c4\u03b5 \u03c4\u03bf *Events* \u03ba\u03b1\u03b9 \u03bf\u03c1\u03af\u03c3\u03c4\u03b5 \u03c4\u03bf \u03cc\u03bd\u03bf\u03bc\u03b1 \u03c4\u03bf\u03c5 Pub/Sub topic \u03c3\u03b5 `{topic_name}`\n4. \u039a\u03ac\u03bd\u03c4\u03b5 \u03ba\u03bb\u03b9\u03ba \u03c3\u03c4\u03bf *Add & Validate* \u03b3\u03b9\u03b1 \u03bd\u03b1 \u03b5\u03c0\u03b1\u03bb\u03b7\u03b8\u03b5\u03cd\u03c3\u03b5\u03c4\u03b5 \u03cc\u03c4\u03b9 \u03c4\u03bf topic \u03ad\u03c7\u03b5\u03b9 \u03c1\u03c5\u03b8\u03bc\u03b9\u03c3\u03c4\u03b5\u03af \u03c3\u03c9\u03c3\u03c4\u03ac.\n\n\u0391\u03bd\u03b1\u03c4\u03c1\u03ad\u03be\u03c4\u03b5 \u03c3\u03c4\u03b7\u03bd \u03c4\u03b5\u03ba\u03bc\u03b7\u03c1\u03af\u03c9\u03c3\u03b7 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7\u03c2 \u03b3\u03b9\u03b1 [\u03c0\u03b5\u03c1\u03b9\u03c3\u03c3\u03cc\u03c4\u03b5\u03c1\u03b5\u03c2 \u03c0\u03bb\u03b7\u03c1\u03bf\u03c6\u03bf\u03c1\u03af\u03b5\u03c2]({more_info_url}).",
+                "submit": "\u0395\u03c0\u03b9\u03b2\u03b5\u03b2\u03b1\u03af\u03c9\u03c3\u03b7",
+                "title": "\u0395\u03bd\u03b5\u03c1\u03b3\u03bf\u03c0\u03bf\u03af\u03b7\u03c3\u03b7 \u03c3\u03c5\u03bc\u03b2\u03ac\u03bd\u03c4\u03c9\u03bd"
+            },
             "reauth_confirm": {
                 "description": "\u0397 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 Nest \u03c0\u03c1\u03ad\u03c0\u03b5\u03b9 \u03bd\u03b1 \u03b5\u03bb\u03ad\u03b3\u03be\u03b5\u03b9 \u03b5\u03ba \u03bd\u03ad\u03bf\u03c5 \u03c4\u03b7\u03bd \u03c4\u03b1\u03c5\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1 \u03c4\u03bf\u03c5 \u03bb\u03bf\u03b3\u03b1\u03c1\u03b9\u03b1\u03c3\u03bc\u03bf\u03cd \u03c3\u03b1\u03c2",
                 "title": "\u039f \u03ad\u03bb\u03b5\u03b3\u03c7\u03bf\u03c2 \u03c4\u03b1\u03c5\u03c4\u03cc\u03c4\u03b7\u03c4\u03b1\u03c2 \u03b3\u03b9\u03b1 \u03c4\u03bf {name} \u03ad\u03bb\u03b7\u03be\u03b5"
@@ -77,6 +82,16 @@
     },
     "entity": {
         "event": {
+            "chime": {
+                "name": "\u039a\u03bf\u03c5\u03b4\u03bf\u03cd\u03bd\u03b9\u03c3\u03bc\u03b1",
+                "state_attributes": {
+                    "event_type": {
+                        "state": {
+                            "doorbell_chime": "\u039a\u03bf\u03c5\u03b4\u03bf\u03cd\u03bd\u03b9\u03c3\u03bc\u03b1"
+                        }
+                    }
+                }
+            },
             "motion": {
                 "name": "\u039a\u03af\u03bd\u03b7\u03c3\u03b7",
                 "state_attributes": {
@@ -90,5 +105,17 @@
                 }
             }
         }
+    },
+    "selector": {
+        "subscription_name": {
+            "options": {
+                "create_new_subscription": "\u0394\u03b7\u03bc\u03b9\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03bd\u03ad\u03b1\u03c2 \u03c3\u03c5\u03bd\u03b4\u03c1\u03bf\u03bc\u03ae\u03c2"
+            }
+        },
+        "topic_name": {
+            "options": {
+                "create_new_topic": "\u0394\u03b7\u03bc\u03b9\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03bd\u03ad\u03bf\u03c5 topic"
+            }
+        }
     }
 }

homeassistant/components/nest/translations/ga.json

@@ -40,6 +40,30 @@
             }
         }
     },
+    "entity": {
+        "event": {
+            "chime": {
+                "name": "Cling\u00edn",
+                "state_attributes": {
+                    "event_type": {
+                        "state": {
+                            "doorbell_chime": "Cling\u00edn"
+                        }
+                    }
+                }
+            },
+            "motion": {
+                "state_attributes": {
+                    "event_type": {
+                        "state": {
+                            "camera_person": "Duine",
+                            "camera_sound": "Fuaim"
+                        }
+                    }
+                }
+            }
+        }
+    },
     "selector": {
         "subscription_name": {
             "options": {

homeassistant/components/nest/translations/sv.json

@@ -48,6 +48,9 @@
                 "description": "Skapa ett Nest Device Access-projekt som **kr\u00e4ver en avgift p\u00e5 5 USD** f\u00f6r att konfigurera.\n 1. G\u00e5 till [Device Access Console]({device_access_console_url}) och genom betalningsfl\u00f6det.\n 1. V\u00e4lj **Skapa projekt**\n 1. Ge ditt Device Access-projekt ett namn och klicka p\u00e5 **N\u00e4sta**.\n 1. Ange ditt OAuth-klient-ID\n 1. Hoppa \u00f6ver aktivering av h\u00e4ndelser och v\u00e4lj **Skapa projekt**. \n\n Ange ditt Device Access Project ID nedan ([mer info]({more_info_url})).",
                 "title": "Nest: Skapa ett projekt f\u00f6r enhets\u00e5tkomst"
             },
+            "oauth_discovery": {
+                "description": "Home Assistant har hittat en Google Nest-enhet i ditt n\u00e4tverk. T\u00e4nk p\u00e5 att konfigurationen av Google Nest \u00e4r mer komplicerad \u00e4n de flesta andra integrationer och kr\u00e4ver att du st\u00e4ller in ett Nest Device Access-projekt som **kr\u00e4ver att du betalar Google en avgift p\u00e5 5 USD**. Tryck p\u00e5 **Submit** f\u00f6r att forts\u00e4tta konfigurera Google Nest."
+            },
             "pick_implementation": {
                 "data": {
                     "implementation": "Autentiseringsuppgifter f\u00f6r applikation"

homeassistant/components/netatmo/translations/el.json

@@ -32,7 +32,9 @@
     },
     "device_automation": {
         "trigger_subtype": {
-            "away": "\u0395\u03ba\u03c4\u03cc\u03c2 \u03c3\u03c0\u03b9\u03c4\u03b9\u03bf\u03cd"
+            "away": "\u0395\u03ba\u03c4\u03cc\u03c2 \u03c3\u03c0\u03b9\u03c4\u03b9\u03bf\u03cd",
+            "hg": "\u03a0\u03c1\u03bf\u03c3\u03c4\u03b1\u03c3\u03af\u03b1 \u03c0\u03b1\u03b3\u03b5\u03c4\u03bf\u03cd",
+            "schedule": "\u03a0\u03c1\u03cc\u03b3\u03c1\u03b1\u03bc\u03bc\u03b1"
         },
         "trigger_type": {
             "alarm_started": "{entity_name} \u03b5\u03bd\u03c4\u03cc\u03c0\u03b9\u03c3\u03b5 \u03ad\u03bd\u03b1\u03bd \u03c3\u03c5\u03bd\u03b1\u03b3\u03b5\u03c1\u03bc\u03cc",
@@ -51,6 +53,11 @@
         }
     },
     "entity": {
+        "button": {
+            "preferred_position": {
+                "name": "\u03a0\u03c1\u03bf\u03c4\u03b9\u03bc\u03ce\u03bc\u03b5\u03bd\u03b7 \u03b8\u03ad\u03c3\u03b7"
+            }
+        },
         "climate": {
             "thermostat": {
                 "state_attributes": {
@@ -109,6 +116,9 @@
             "temp_trend": {
                 "name": "\u03a4\u03ac\u03c3\u03b7 \u03b8\u03b5\u03c1\u03bc\u03bf\u03ba\u03c1\u03b1\u03c3\u03af\u03b1\u03c2"
             },
+            "wifi_strength": {
+                "name": "\u0399\u03c3\u03c7\u03cd\u03c2 Wi-Fi"
+            },
             "wind_angle": {
                 "name": "\u0393\u03c9\u03bd\u03af\u03b1 \u03b1\u03bd\u03ad\u03bc\u03bf\u03c5"
             },
@@ -182,6 +192,9 @@
         "set_preset_mode_with_end_datetime": {
             "description": "\u039f\u03c1\u03af\u03b6\u03b5\u03b9 \u03c4\u03b7\u03bd \u03c0\u03c1\u03bf\u03ba\u03b1\u03b8\u03bf\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03b3\u03b9\u03b1 \u03bc\u03b9\u03b1 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03ba\u03bb\u03af\u03bc\u03b1\u03c4\u03bf\u03c2 Netatmo. \u0397 \u03c0\u03c1\u03bf\u03b5\u03c0\u03b9\u03bb\u03b5\u03b3\u03bc\u03ad\u03bd\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03c1\u03ad\u03c0\u03b5\u03b9 \u03bd\u03b1 \u03c4\u03b1\u03b9\u03c1\u03b9\u03ac\u03b6\u03b5\u03b9 \u03bc\u03b5 \u03bc\u03b9\u03b1 \u03c0\u03c1\u03bf\u03ba\u03b1\u03b8\u03bf\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03c0\u03bf\u03c5 \u03ad\u03c7\u03b5\u03b9 \u03b4\u03b9\u03b1\u03bc\u03bf\u03c1\u03c6\u03c9\u03b8\u03b5\u03af \u03c3\u03c4\u03b7 Netatmo.",
             "fields": {
+                "end_datetime": {
+                    "description": "\u0397\u03bc\u03b5\u03c1\u03bf\u03bc\u03b7\u03bd\u03af\u03b1 \u03ba\u03b1\u03b9 \u03ce\u03c1\u03b1 \u03ad\u03c9\u03c2 \u03c4\u03b7\u03bd \u03bf\u03c0\u03bf\u03af\u03b1 \u03b8\u03b1 \u03b5\u03af\u03bd\u03b1\u03b9 \u03b5\u03bd\u03b5\u03c1\u03b3\u03ae \u03b7 \u03c0\u03c1\u03bf\u03ba\u03b1\u03b8\u03bf\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03b7 \u03c1\u03cd\u03b8\u03bc\u03b9\u03c3\u03b7."
+                },
                 "preset_mode": {
                     "description": "\u03a0\u03c1\u03bf\u03ba\u03b1\u03b8\u03bf\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1 \u03ba\u03bb\u03af\u03bc\u03b1\u03c4\u03bf\u03c2, \u03cc\u03c0\u03c9\u03c2 \u03a0\u03c1\u03bf\u03b3\u03c1\u03b1\u03bc\u03bc\u03b1\u03c4\u03b9\u03c3\u03bc\u03cc\u03c2, \u0395\u03ba\u03c4\u03cc\u03c2 \u03c3\u03c0\u03b9\u03c4\u03b9\u03bf\u03cd \u03ae \u03a0\u03c1\u03bf\u03c3\u03c4\u03b1\u03c3\u03af\u03b1 \u03a0\u03b1\u03b3\u03b5\u03c4\u03bf\u03cd.",
                     "name": "\u03a0\u03c1\u03bf\u03ba\u03b1\u03b8\u03bf\u03c1\u03b9\u03c3\u03bc\u03ad\u03bd\u03b7 \u03bb\u03b5\u03b9\u03c4\u03bf\u03c5\u03c1\u03b3\u03af\u03b1"
@@ -189,11 +202,13 @@
             }
         },
         "set_schedule": {
+            "description": "\u039f\u03c1\u03af\u03b6\u03b5\u03b9 \u03c4\u03bf \u03c0\u03c1\u03cc\u03b3\u03c1\u03b1\u03bc\u03bc\u03b1 \u03b8\u03ad\u03c1\u03bc\u03b1\u03bd\u03c3\u03b7\u03c2 \u03b3\u03b9\u03b1 \u03c4\u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03ba\u03bb\u03af\u03bc\u03b1\u03c4\u03bf\u03c2 Netatmo. \u03a4\u03bf \u03cc\u03bd\u03bf\u03bc\u03b1 \u03c4\u03bf\u03c5 \u03c0\u03c1\u03bf\u03b3\u03c1\u03ac\u03bc\u03bc\u03b1\u03c4\u03bf\u03c2 \u03c0\u03c1\u03ad\u03c0\u03b5\u03b9 \u03bd\u03b1 \u03c4\u03b1\u03b9\u03c1\u03b9\u03ac\u03b6\u03b5\u03b9 \u03bc\u03b5 \u03ad\u03bd\u03b1 \u03c0\u03c1\u03cc\u03b3\u03c1\u03b1\u03bc\u03bc\u03b1 \u03c0\u03bf\u03c5 \u03ad\u03c7\u03b5\u03b9 \u03b4\u03b9\u03b1\u03bc\u03bf\u03c1\u03c6\u03c9\u03b8\u03b5\u03af \u03c3\u03c4\u03bf Netatmo.",
             "fields": {
                 "schedule_name": {
-                    "name": "\u03c0\u03c1\u03cc\u03b3\u03c1\u03b1\u03bc\u03bc\u03b1"
+                    "name": "\u03a0\u03c1\u03cc\u03b3\u03c1\u03b1\u03bc\u03bc\u03b1"
                 }
-            }
+            },
+            "name": "\u039f\u03c1\u03b9\u03c3\u03bc\u03cc\u03c2 \u03c0\u03c1\u03bf\u03b3\u03c1\u03ac\u03bc\u03bc\u03b1\u03c4\u03bf\u03c2 \u03b8\u03ad\u03c1\u03bc\u03b1\u03bd\u03c3\u03b7\u03c2"
         },
         "set_temperature_with_end_datetime": {
             "description": "\u039f\u03c1\u03af\u03b6\u03b5\u03b9 \u03c4\u03b7 \u03b8\u03b5\u03c1\u03bc\u03bf\u03ba\u03c1\u03b1\u03c3\u03af\u03b1-\u03c3\u03c4\u03cc\u03c7\u03bf \u03b3\u03b9\u03b1 \u03bc\u03b9\u03b1 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03ba\u03bb\u03af\u03bc\u03b1\u03c4\u03bf\u03c2 Netatmo \u03bc\u03b5 \u03b7\u03bc\u03b5\u03c1\u03bf\u03bc\u03b7\u03bd\u03af\u03b1 \u03ba\u03b1\u03b9 \u03ce\u03c1\u03b1 \u03bb\u03ae\u03be\u03b7\u03c2.",

homeassistant/components/netgear/translations/el.json

@@ -2,6 +2,7 @@
     "config": {
         "abort": {
             "already_configured": "\u0397 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae \u03ad\u03c7\u03b5\u03b9 \u03ae\u03b4\u03b7 \u03b4\u03b9\u03b1\u03bc\u03bf\u03c1\u03c6\u03c9\u03b8\u03b5\u03af",
+            "no_serial": "\u0394\u03b5\u03bd \u03c5\u03c0\u03ac\u03c1\u03c7\u03b5\u03b9 \u03c3\u03b5\u03b9\u03c1\u03b9\u03b1\u03ba\u03cc\u03c2 \u03b1\u03c1\u03b9\u03b8\u03bc\u03cc\u03c2 \u03c3\u03c4\u03b9\u03c2 \u03c0\u03bb\u03b7\u03c1\u03bf\u03c6\u03bf\u03c1\u03af\u03b5\u03c2 \u03b1\u03bd\u03b1\u03ba\u03ac\u03bb\u03c5\u03c8\u03b7\u03c2 SSDP",
             "not_ipv4_address": "\u0394\u03b5\u03bd \u03c5\u03c0\u03ac\u03c1\u03c7\u03b5\u03b9 \u03b4\u03b9\u03b5\u03cd\u03b8\u03c5\u03bd\u03c3\u03b7 IPv4 \u03c3\u03c4\u03b9\u03c2 \u03c0\u03bb\u03b7\u03c1\u03bf\u03c6\u03bf\u03c1\u03af\u03b5\u03c2 \u03b5\u03bd\u03c4\u03bf\u03c0\u03b9\u03c3\u03bc\u03bf\u03cd SSDP"
         },
         "error": {
@@ -24,6 +25,9 @@
     },
     "entity": {
         "sensor": {
+            "access_point_mac": {
+                "name": "MAC \u03c3\u03b7\u03bc\u03b5\u03af\u03bf\u03c5 \u03c0\u03c1\u03cc\u03c3\u03b2\u03b1\u03c3\u03b7\u03c2"
+            },
             "average_ping": {
                 "name": "\u039c\u03ad\u03c3\u03bf\u03c2 \u03cc\u03c1\u03bf\u03c2 ping"
             },