homeassistant 2025.7.0b1__py3-none-any.whl → 2025.7.0b2__py3-none-any.whl

homeassistant/components/homeassistant_yellow/translations/de.json

@@ -13,6 +13,7 @@
             "addon_install_failed": "Die Installation des Add-ons {addon_name} ist fehlgeschlagen.",
             "addon_set_config_failed": "Die Konfiguration von {addon_name} konnte nicht gesetzt werden.",
             "addon_start_failed": "Das Add-on {addon_name} konnte nicht gestartet werden.",
+            "fw_download_failed": "Download der {firmware_name}-Firmware f\u00fcr deinen {model} fehlgeschlagen. Stelle sicher, dass Home Assistant einen Internetzugang hat und versuche es erneut.",
             "not_hassio": "Die Hardwareoptionen k\u00f6nnen nur auf Installationen mit Home Assistant OS konfiguriert werden.",
             "not_hassio_thread": "Das OpenThread Border Router-Add-on kann nur mit Home Assistant OS installiert werden. Wenn du das {model} als Thread Border Router verwenden m\u00f6chtest, flashe die Firmware bitte manuell mit dem [Web Flasher]({docs_web_flasher_url}) und richte den OpenThread Border Router f\u00fcr die Kommunikation damit ein.",
             "otbr_addon_already_running": "Das OpenThread Border Router-Add-on wird bereits ausgef\u00fchrt und kann nicht erneut installiert werden.",

homeassistant/components/homeassistant_yellow/translations/el.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "\u03a4\u03bf \u03c0\u03c1\u03cc\u03c3\u03b8\u03b5\u03c4\u03bf OpenThread Border Router \u03b5\u03ba\u03c4\u03b5\u03bb\u03b5\u03af\u03c4\u03b1\u03b9 \u03ae\u03b4\u03b7, \u03b4\u03b5\u03bd \u03bc\u03c0\u03bf\u03c1\u03b5\u03af \u03bd\u03b1 \u03b5\u03b3\u03ba\u03b1\u03c4\u03b1\u03c3\u03c4\u03b1\u03b8\u03b5\u03af \u03be\u03b1\u03bd\u03ac.",
             "otbr_still_using_stick": "\u0391\u03c5\u03c4\u03cc \u03c4\u03bf {model} \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b5\u03af\u03c4\u03b1\u03b9 \u03b1\u03c0\u03cc \u03c4\u03bf \u03c0\u03c1\u03cc\u03c3\u03b8\u03b5\u03c4\u03bf OpenThread Border Router. \u0395\u03ac\u03bd \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b5\u03af\u03c4\u03b5 \u03c4\u03bf \u03b4\u03af\u03ba\u03c4\u03c5\u03bf Thread, \u03b2\u03b5\u03b2\u03b1\u03b9\u03c9\u03b8\u03b5\u03af\u03c4\u03b5 \u03cc\u03c4\u03b9 \u03ad\u03c7\u03b5\u03c4\u03b5 \u03b5\u03bd\u03b1\u03bb\u03bb\u03b1\u03ba\u03c4\u03b9\u03ba\u03ac Border Routers. \u0391\u03c0\u03b5\u03b3\u03ba\u03b1\u03c4\u03b1\u03c3\u03c4\u03ae\u03c3\u03c4\u03b5 \u03c4\u03bf \u03c0\u03c1\u03cc\u03c3\u03b8\u03b5\u03c4\u03bf \u03ba\u03b1\u03b9 \u03b4\u03bf\u03ba\u03b9\u03bc\u03ac\u03c3\u03c4\u03b5 \u03be\u03b1\u03bd\u03ac.",
             "read_hw_settings_error": "\u0391\u03c0\u03bf\u03c4\u03c5\u03c7\u03af\u03b1 \u03b1\u03bd\u03ac\u03b3\u03bd\u03c9\u03c3\u03b7\u03c2 \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c9\u03bd \u03c5\u03bb\u03b9\u03ba\u03bf\u03cd",
-            "unsupported_firmware": "\u03a4\u03bf \u03c5\u03bb\u03b9\u03ba\u03bf\u03bb\u03bf\u03b3\u03b9\u03c3\u03bc\u03b9\u03ba\u03cc \u03c4\u03bf\u03c5 \u03c0\u03bf\u03bc\u03c0\u03bf\u03b4\u03ad\u03ba\u03c4\u03b7 \u03c3\u03c4\u03bf {model} \u03c3\u03b1\u03c2 \u03b4\u03b5\u03bd \u03bc\u03c0\u03cc\u03c1\u03b5\u03c3\u03b5 \u03bd\u03b1 \u03c0\u03c1\u03bf\u03c3\u03b4\u03b9\u03bf\u03c1\u03b9\u03c3\u03c4\u03b5\u03af. \u0392\u03b5\u03b2\u03b1\u03b9\u03c9\u03b8\u03b5\u03af\u03c4\u03b5 \u03cc\u03c4\u03b9 \u03ba\u03b1\u03bc\u03af\u03b1 \u03ac\u03bb\u03bb\u03b7 \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 \u03ae \u03c0\u03c1\u03bf\u03c3\u03b8\u03ae\u03ba\u03b7 \u03b4\u03b5\u03bd \u03c0\u03c1\u03bf\u03c3\u03c0\u03b1\u03b8\u03b5\u03af \u03bd\u03b1 \u03b5\u03c0\u03b9\u03ba\u03bf\u03b9\u03bd\u03c9\u03bd\u03ae\u03c3\u03b5\u03b9 \u03bc\u03b5 \u03c4\u03b7 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae.",
             "write_hw_settings_error": "\u0391\u03c0\u03ad\u03c4\u03c5\u03c7\u03b5 \u03b7 \u03b5\u03b3\u03b3\u03c1\u03b1\u03c6\u03ae \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c9\u03bd \u03c5\u03bb\u03b9\u03ba\u03bf\u03cd",
             "zha_migration_failed": "\u0397 \u03bc\u03b5\u03c4\u03ac\u03b2\u03b1\u03c3\u03b7 ZHA \u03b4\u03b5\u03bd \u03c0\u03ad\u03c4\u03c5\u03c7\u03b5.",
             "zha_still_using_stick": "\u0391\u03c5\u03c4\u03cc \u03c4\u03bf {model} \u03c7\u03c1\u03b7\u03c3\u03b9\u03bc\u03bf\u03c0\u03bf\u03b9\u03b5\u03af\u03c4\u03b1\u03b9 \u03b1\u03c0\u03cc \u03c4\u03b7\u03bd \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 Zigbee Home Automation. \u03a0\u03b1\u03c1\u03b1\u03ba\u03b1\u03bb\u03ce \u03bc\u03b5\u03c4\u03b5\u03b3\u03ba\u03b1\u03c4\u03b1\u03c3\u03c4\u03ae\u03c3\u03c4\u03b5 \u03c4\u03bf \u03b4\u03af\u03ba\u03c4\u03c5\u03cc \u03c3\u03b1\u03c2 Zigbee \u03c3\u03b5 \u03ac\u03bb\u03bb\u03bf\u03bd \u03c0\u03c1\u03bf\u03c3\u03b1\u03c1\u03bc\u03bf\u03b3\u03ad\u03b1 \u03ae \u03b4\u03b9\u03b1\u03b3\u03c1\u03ac\u03c8\u03c4\u03b5 \u03c4\u03b7\u03bd \u03b5\u03bd\u03c3\u03c9\u03bc\u03ac\u03c4\u03c9\u03c3\u03b7 \u03ba\u03b1\u03b9 \u03b4\u03bf\u03ba\u03b9\u03bc\u03ac\u03c3\u03c4\u03b5 \u03be\u03b1\u03bd\u03ac."

homeassistant/components/homeassistant_yellow/translations/en-GB.json

@@ -13,12 +13,13 @@
             "addon_install_failed": "Failed to install the {addon_name} add-on.",
             "addon_set_config_failed": "Failed to set {addon_name} configuration.",
             "addon_start_failed": "Failed to start the {addon_name} add-on.",
+            "fw_download_failed": "{firmware_name} firmware for your {model} failed to download. Make sure Home Assistant has internet access and try again.",
             "not_hassio": "The hardware options can only be configured on Home Assistant OS installations.",
             "not_hassio_thread": "The OpenThread Border Router add-on can only be installed with Home Assistant OS. If you would like to use the {model} as a Thread border router, please flash the firmware manually using the [web flasher]({docs_web_flasher_url}) and set up OpenThread Border Router to communicate with it.",
             "otbr_addon_already_running": "The OpenThread Border Router add-on is already running, it cannot be installed again.",
             "otbr_still_using_stick": "This {model} is in use by the OpenThread Border Router add-on. If you use the Thread network, make sure you have alternative border routers. Uninstall the add-on and try again.",
             "read_hw_settings_error": "Failed to read hardware settings",
-            "unsupported_firmware": "The radio firmware on your {model} could not be determined. Make sure that no other integration or addon is currently trying to communicate with the device.",
+            "unsupported_firmware": "The radio firmware on your {model} could not be determined. Make sure that no other integration or add-on is currently trying to communicate with the device.",
             "write_hw_settings_error": "Failed to write hardware settings",
             "zha_migration_failed": "The ZHA migration did not succeed.",
             "zha_still_using_stick": "This {model} is in use by the Zigbee Home Automation integration. Please migrate your Zigbee network to another adapter or delete the integration and try again."

homeassistant/components/homeassistant_yellow/translations/en.json

@@ -13,12 +13,13 @@
             "addon_install_failed": "Failed to install the {addon_name} add-on.",
             "addon_set_config_failed": "Failed to set {addon_name} configuration.",
             "addon_start_failed": "Failed to start the {addon_name} add-on.",
+            "fw_download_failed": "{firmware_name} firmware for your {model} failed to download. Make sure Home Assistant has internet access and try again.",
             "not_hassio": "The hardware options can only be configured on Home Assistant OS installations.",
             "not_hassio_thread": "The OpenThread Border Router add-on can only be installed with Home Assistant OS. If you would like to use the {model} as a Thread border router, please flash the firmware manually using the [web flasher]({docs_web_flasher_url}) and set up OpenThread Border Router to communicate with it.",
             "otbr_addon_already_running": "The OpenThread Border Router add-on is already running, it cannot be installed again.",
             "otbr_still_using_stick": "This {model} is in use by the OpenThread Border Router add-on. If you use the Thread network, make sure you have alternative border routers. Uninstall the add-on and try again.",
             "read_hw_settings_error": "Failed to read hardware settings",
-            "unsupported_firmware": "The radio firmware on your {model} could not be determined. Make sure that no other integration or addon is currently trying to communicate with the device.",
+            "unsupported_firmware": "The radio firmware on your {model} could not be determined. Make sure that no other integration or add-on is currently trying to communicate with the device.",
             "write_hw_settings_error": "Failed to write hardware settings",
             "zha_migration_failed": "The ZHA migration did not succeed.",
             "zha_still_using_stick": "This {model} is in use by the Zigbee Home Automation integration. Please migrate your Zigbee network to another adapter or delete the integration and try again."

homeassistant/components/homeassistant_yellow/translations/es.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "El complemento OpenThread Border Router ya se est\u00e1 ejecutando y no se puede volver a instalar.",
             "otbr_still_using_stick": "{model} es utilizado por el complemento OpenThread Border Router. Si utilizas la red Thread, aseg\u00farate de tener routers fronterizos alternativos. Desinstala el complemento y vuelve a intentarlo.",
             "read_hw_settings_error": "No se pudo leer la configuraci\u00f3n del hardware",
-            "unsupported_firmware": "No se pudo determinar el firmware de la radio de tu {model}. Aseg\u00farate de que ninguna otra integraci\u00f3n o complemento est\u00e9 intentando comunicarse con el dispositivo.",
             "write_hw_settings_error": "No se pudo escribir la configuraci\u00f3n del hardware",
             "zha_migration_failed": "La migraci\u00f3n de ZHA no tuvo \u00e9xito.",
             "zha_still_using_stick": "{model} est\u00e1 en uso por la integraci\u00f3n de Zigbee Home Automation. Por favor, migra tu red Zigbee a otro adaptador o elimina la integraci\u00f3n e int\u00e9ntalo de nuevo."

homeassistant/components/homeassistant_yellow/translations/et.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "OpenThread Border Router lisandmoodul on juba k\u00e4ivitatud, seda ei saa uuesti paigaldada.",
             "otbr_still_using_stick": "Seda {model} kasutab OpenThread Border Router lisa. Kui kasutad Thread-v\u00f5rku, veendu, et olemas on alternatiivsed piiriruuterid. Eemalda lisandmoodul ja proovi uuesti.",
             "read_hw_settings_error": "Riistvaraseadete lugemine nurjus",
-            "unsupported_firmware": "Raadio p\u00fcsivara {model} ei olnud v\u00f5imalik kindlaks teha. Veendu, et \u00fckski teine sidumine ega lisandmoodul ei \u00fcritaks praegu seadmega suhelda.",
             "write_hw_settings_error": "Riistvaraseadete kirjutamine nurjus",
             "zha_migration_failed": "ZHA sidumise siirdamine nurjus.",
             "zha_still_using_stick": "Seda {model} kasutab Zigbee Home Automationi sidumine. Vii oma Zigbee v\u00f5rk \u00fcle teisele adapterile v\u00f5i kustuta sidumine ja proovi uuesti."

homeassistant/components/homeassistant_yellow/translations/fr.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "Le module compl\u00e9mentaire OpenThread Border Router est d\u00e9j\u00e0 en cours d\u2019ex\u00e9cution, il ne peut pas \u00eatre r\u00e9install\u00e9.",
             "otbr_still_using_stick": "Ce {model} est utilis\u00e9 par le module compl\u00e9mentaire OpenThread Border Router. Si vous utilisez le r\u00e9seau Thread, assurez-vous de disposer de routeurs de bordure alternatifs. D\u00e9sinstallez le module compl\u00e9mentaire et r\u00e9essayez.",
             "read_hw_settings_error": "\u00c9chec de la lecture des param\u00e8tres du mat\u00e9riel",
-            "unsupported_firmware": "Impossible de d\u00e9terminer le micrologiciel radio de votre {model}. Assurez-vous qu'aucune autre int\u00e9gration ou module compl\u00e9mentaire n'essaie actuellement de communiquer avec l'appareil.",
             "write_hw_settings_error": "\u00c9chec de l'\u00e9criture des param\u00e8tres du mat\u00e9riel",
             "zha_migration_failed": "La migration ZHA n\u2019a pas r\u00e9ussi.",
             "zha_still_using_stick": "Ce {model} est utilis\u00e9 par l'int\u00e9gration Zigbee Home Automation. Veuillez migrer votre r\u00e9seau Zigbee vers un autre adaptateur ou supprimer l'int\u00e9gration et r\u00e9essayer."

homeassistant/components/homeassistant_yellow/translations/he.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "\u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router \u05db\u05d1\u05e8 \u05e4\u05d5\u05e2\u05dc, \u05dc\u05d0 \u05e0\u05d9\u05ea\u05df \u05dc\u05d4\u05ea\u05e7\u05d9\u05df \u05d0\u05d5\u05ea\u05d5 \u05e9\u05d5\u05d1.",
             "otbr_still_using_stick": "{model} \u05d6\u05d4 \u05e0\u05de\u05e6\u05d0 \u05d1\u05e9\u05d9\u05de\u05d5\u05e9 \u05e2\u05dc-\u05d9\u05d3\u05d9 \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 OpenThread Border Router. \u05d0\u05dd \u05d1\u05e8\u05e9\u05d5\u05ea\u05da \u05e8\u05e9\u05ea Thread, \u05d9\u05e9 \u05dc\u05d5\u05d5\u05d3\u05d0 \u05e9\u05d9\u05e9 \u05dc\u05da \u05e0\u05ea\u05d1\u05d9 \u05d2\u05d1\u05d5\u05dc \u05d7\u05dc\u05d5\u05e4\u05d9\u05d9\u05dd. \u05dc\u05d4\u05e1\u05d9\u05e8 \u05d0\u05ea \u05d4\u05d4\u05ea\u05e7\u05e0\u05d4 \u05e9\u05dc \u05d4\u05d4\u05e8\u05d7\u05d1\u05d4 \u05d5\u05dc\u05e0\u05e1\u05d5\u05ea \u05e9\u05d5\u05d1.",
             "read_hw_settings_error": "\u05e7\u05e8\u05d9\u05d0\u05ea \u05d4\u05d2\u05d3\u05e8\u05d5\u05ea \u05d7\u05d5\u05de\u05e8\u05d4 \u05e0\u05db\u05e9\u05dc\u05d4",
-            "unsupported_firmware": "\u05dc\u05d0 \u05e0\u05d9\u05ea\u05df \u05dc\u05e7\u05d1\u05d5\u05e2 \u05d0\u05ea \u05e7\u05d5\u05e9\u05d7\u05ea \u05d4\u05e8\u05d3\u05d9\u05d5 \u05d1-{model} \u05e9\u05dc\u05da. \u05d9\u05e9 \u05dc\u05d5\u05d5\u05d3\u05d0 \u05e9\u05d0\u05e3 \u05e9\u05d9\u05dc\u05d5\u05d1 \u05d0\u05d5 \u05d4\u05e8\u05d7\u05d1\u05d4 \u05d0\u05d7\u05e8\u05ea \u05dc\u05d0 \u05de\u05e0\u05e1\u05d9\u05dd \u05db\u05e8\u05d2\u05e2 \u05dc\u05ea\u05e7\u05e9\u05e8 \u05e2\u05dd \u05d4\u05d4\u05ea\u05e7\u05df.",
             "write_hw_settings_error": "\u05db\u05ea\u05d9\u05d1\u05ea \u05d4\u05d2\u05d3\u05e8\u05d5\u05ea \u05d7\u05d5\u05de\u05e8\u05d4 \u05e0\u05db\u05e9\u05dc\u05d4",
             "zha_migration_failed": "\u05e0\u05d3\u05d9\u05d3\u05ea \u05d4-ZHA \u05dc\u05d0 \u05d4\u05e6\u05dc\u05d9\u05d7\u05d4.",
             "zha_still_using_stick": "{model} \u05d6\u05d4 \u05e0\u05de\u05e6\u05d0 \u05d1\u05e9\u05d9\u05de\u05d5\u05e9 \u05e2\u05dc-\u05d9\u05d3\u05d9 \u05e9\u05d9\u05dc\u05d5\u05d1 Zigbee Home Automation. \u05d9\u05e9 \u05dc\u05d4\u05e2\u05d1\u05d9\u05e8 \u05d0\u05ea \u05e8\u05e9\u05ea Zigbee \u05e9\u05dc\u05da \u05dc\u05de\u05ea\u05d0\u05dd \u05d0\u05d7\u05e8 \u05d0\u05d5 \u05dc\u05de\u05d7\u05d5\u05e7 \u05d0\u05ea \u05d4\u05e9\u05d9\u05dc\u05d5\u05d1 \u05d5\u05dc\u05e0\u05e1\u05d5\u05ea \u05e9\u05d5\u05d1."

homeassistant/components/homeassistant_yellow/translations/hu.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "Az OpenThread Thread \u00fatv\u00e1laszt\u00f3 b\u0151v\u00edtm\u00e9ny m\u00e1r fut, nem telep\u00edthet\u0151 \u00fajra.",
             "otbr_still_using_stick": "Ezt a(z) {model} modellt az OpenThread Thread \u00fatv\u00e1laszt\u00f3 b\u0151v\u00edtm\u00e9ny haszn\u00e1lja. Ha haszn\u00e1lja a Thread h\u00e1l\u00f3zatot, gy\u0151z\u0151dj\u00f6n meg r\u00f3la, hogy rendelkezik alternat\u00edv Thread \u00fatv\u00e1laszt\u00f3val. T\u00e1vol\u00edtsa el a b\u0151v\u00edtm\u00e9nyt \u00e9s pr\u00f3b\u00e1lja meg \u00fajra.",
             "read_hw_settings_error": "Hardverbe\u00e1ll\u00edt\u00e1sok olvas\u00e1sa sikertelen",
-            "unsupported_firmware": "A(z) {model} eszk\u00f6z r\u00e1di\u00f3firmware-je nem \u00e1llap\u00edthat\u00f3 meg. Gy\u0151z\u0151dj\u00f6n meg r\u00f3la, hogy jelenleg nincs m\u00e1sik integr\u00e1ci\u00f3 vagy b\u0151v\u00edtm\u00e9ny, amely megpr\u00f3b\u00e1l kommunik\u00e1lni az eszk\u00f6zzel.",
             "write_hw_settings_error": "Hardverbe\u00e1ll\u00edt\u00e1sok \u00edr\u00e1sa sikertelen",
             "zha_migration_failed": "A ZHA migr\u00e1ci\u00f3 nem siker\u00fclt.",
             "zha_still_using_stick": "Ezt a(z) {model} modellt a Zigbee Home Automation integr\u00e1ci\u00f3 haszn\u00e1lja. K\u00e9rj\u00fck, migr\u00e1lja Zigbee h\u00e1l\u00f3zat\u00e1t egy m\u00e1sik adapterre vagy t\u00f6r\u00f6lje az integr\u00e1ci\u00f3t \u00e9s pr\u00f3b\u00e1lja \u00fajra."

homeassistant/components/homeassistant_yellow/translations/id.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "Add-on OpenThread Border Router sudah berjalan, tidak dapat diinstal lagi.",
             "otbr_still_using_stick": "{model} ini digunakan oleh add-on OpenThread Border Router. Jika Anda menggunakan jaringan Thread, pastikan Anda memiliki router perbatasan alternatif. Copot pengaya dan coba lagi.",
             "read_hw_settings_error": "Gagal membaca pengaturan perangkat keras",
-            "unsupported_firmware": "Firmware radio pada {model} Anda tidak dapat dikenali. Pastikan tidak ada integrasi atau addon lain yang sedang mencoba berkomunikasi dengan perangkat.",
             "write_hw_settings_error": "Gagal menulis pengaturan perangkat keras",
             "zha_migration_failed": "Migrasi ZHA tidak berhasil.",
             "zha_still_using_stick": "{model} ini digunakan oleh integrasi Zigbee Home Automation. Migrasikan jaringan Zigbee Anda ke adaptor lain atau hapus integrasi dan coba lagi."

homeassistant/components/homeassistant_yellow/translations/it.json

@@ -8,7 +8,6 @@
             "addon_start_failed": "Impossibile avviare il componente aggiuntivo {addon_name}.",
             "not_hassio": "Le opzioni hardware possono essere configurate solo su installazioni HassOS.",
             "read_hw_settings_error": "Impossibile leggere le impostazioni hardware",
-            "unsupported_firmware": "Il firmware della radio sul tuo {model} non pu\u00f2 essere determinato. Assicurati che nessun'altra integrazione o addon stia attualmente cercando di comunicare con il dispositivo.",
             "write_hw_settings_error": "Impossibile scrivere le impostazioni hardware",
             "zha_migration_failed": "La migrazione ZHA non \u00e8 riuscita."
         },

homeassistant/components/homeassistant_yellow/translations/ja.json

@@ -11,7 +11,6 @@
             "otbr_addon_already_running": "OpenThread Border Router \u30a2\u30c9\u30aa\u30f3\u306f\u3059\u3067\u306b\u5b9f\u884c\u3055\u308c\u3066\u3044\u308b\u305f\u3081\u3001\u518d\u5ea6\u30a4\u30f3\u30b9\u30c8\u30fc\u30eb\u3059\u308b\u3053\u3068\u306f\u3067\u304d\u307e\u305b\u3093\u3002",
             "otbr_still_using_stick": "\u3053\u306e{model} OpenThread Border Router \u30a2\u30c9\u30aa\u30f3\u306b\u3088\u3063\u3066\u4f7f\u7528\u3055\u308c\u3066\u3044\u307e\u3059\u3002Thread \u30cd\u30c3\u30c8\u30ef\u30fc\u30af\u3092\u4f7f\u7528\u3059\u308b\u5834\u5408\u306f\u3001\u4ee3\u66ff\u306e\u5883\u754c\u30eb\u30fc\u30bf\u30fc\u304c\u3042\u308b\u3053\u3068\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044\u3002\u30a2\u30c9\u30aa\u30f3\u3092\u30a2\u30f3\u30a4\u30f3\u30b9\u30c8\u30fc\u30eb\u3057\u3066\u3001\u3082\u3046\u4e00\u5ea6\u304a\u8a66\u3057\u304f\u3060\u3055\u3044\u3002",
             "read_hw_settings_error": "\u30cf\u30fc\u30c9\u30a6\u30a7\u30a2\u8a2d\u5b9a\u306e\u8aad\u307f\u53d6\u308a\u306b\u5931\u6557\u3057\u307e\u3057\u305f",
-            "unsupported_firmware": "{model}\u306e\u7121\u7dda\u30d5\u30a1\u30fc\u30e0\u30a6\u30a7\u30a2\u3092\u5224\u5225\u3067\u304d\u307e\u305b\u3093\u3067\u3057\u305f\u3002\u73fe\u5728\u3001\u4ed6\u306e\u7d71\u5408\u307e\u305f\u306f\u30a2\u30c9\u30aa\u30f3\u304c\u30c7\u30d0\u30a4\u30b9\u3068\u901a\u4fe1\u3057\u3088\u3046\u3068\u3057\u3066\u3044\u306a\u3044\u3053\u3068\u3092\u78ba\u8a8d\u3057\u3066\u304f\u3060\u3055\u3044\u3002",
             "write_hw_settings_error": "\u30cf\u30fc\u30c9\u30a6\u30a7\u30a2\u8a2d\u5b9a\u306e\u66f8\u304d\u8fbc\u307f\u306b\u5931\u6557\u3057\u307e\u3057\u305f",
             "zha_migration_failed": "ZHA\u3078\u306e\u79fb\u884c\u306f\u6210\u529f\u3057\u307e\u305b\u3093\u3067\u3057\u305f\u3002",
             "zha_still_using_stick": "\u3053\u306e{model} Zigbee \u30db\u30fc\u30e0 \u30aa\u30fc\u30c8\u30e1\u30fc\u30b7\u30e7\u30f3\u7d71\u5408\u306b\u3088\u3063\u3066\u4f7f\u7528\u3055\u308c\u3066\u3044\u307e\u3059\u3002Zigbee \u30cd\u30c3\u30c8\u30ef\u30fc\u30af\u3092\u5225\u306e\u30a2\u30c0\u30d7\u30bf\u306b\u79fb\u884c\u3059\u308b\u304b\u3001\u7d71\u5408\u3092\u524a\u9664\u3057\u3066\u3082\u3046\u4e00\u5ea6\u304a\u8a66\u3057\u304f\u3060\u3055\u3044\u3002"

homeassistant/components/homeassistant_yellow/translations/lt.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "OpenThread Border Router priedas jau veikia, jo negalima \u012fdiegti dar kart\u0105.",
             "otbr_still_using_stick": "\u0160\u012f {model} naudoja OpenThread Border Router priedas. Jei naudojate Thread tinkl\u0105, \u012fsitikinkite, kad turite alternatyvi\u0173 kra\u0161tini\u0173 mar\u0161rutizatori\u0173. Pa\u0161alinkite pried\u0105 ir bandykite dar kart\u0105.",
             "read_hw_settings_error": "Nepavyko nuskaityti aparat\u016bros nustatym\u0173",
-            "unsupported_firmware": "Nepavyko nustatyti j\u016bs\u0173 {model} radijo programin\u0117s-technin\u0117s \u012frangos. \u012esitikinkite, kad jokia kita integracija ar priedas \u0161iuo metu nebando susisiekti su prietaisu.",
             "write_hw_settings_error": "Nepavyko \u012fra\u0161yti aparat\u016bros nustatym\u0173",
             "zha_migration_failed": "ZHA perk\u0117limas nepavyko.",
             "zha_still_using_stick": "\u0160\u012f {model} naudoja Zigbee Home Automation integracija. Perkelkite \u201eZigbee\u201c tinkl\u0105 \u012f kit\u0105 adapter\u012f arba i\u0161trinkite integracij\u0105 ir bandykite dar kart\u0105."

homeassistant/components/homeassistant_yellow/translations/pt.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "O add-on OpenThread Border Router j\u00e1 est\u00e1 em execu\u00e7\u00e3o, n\u00e3o pode ser instalado novamente.",
             "otbr_still_using_stick": "Este {model} est\u00e1 a ser utilizado pelo add-on OpenThread Border Router. Se utilizar a rede Thread, certifique-se de que tem routers de borda alternativos. Desinstale o add-on e tente novamente.",
             "read_hw_settings_error": "Falha ao ler as configura\u00e7\u00f5es de hardware",
-            "unsupported_firmware": "N\u00e3o foi poss\u00edvel determinar o firmware do r\u00e1dio no seu {model}. Certifique-se de que nenhuma outra integra\u00e7\u00e3o ou complemento est\u00e1 atualmente a tentar comunicar com o dispositivo.",
             "write_hw_settings_error": "Falha ao gravar as configura\u00e7\u00f5es de hardware",
             "zha_migration_failed": "A migra\u00e7\u00e3o do ZHA n\u00e3o foi bem sucedida.",
             "zha_still_using_stick": "Este {model} est\u00e1 a ser utilizado pela integra\u00e7\u00e3o Zigbee Home Automation. Por favor, migre a sua rede Zigbee para outro adaptador ou elimine a integra\u00e7\u00e3o e tente novamente."

homeassistant/components/homeassistant_yellow/translations/ru.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "\u0414\u043e\u043f\u043e\u043b\u043d\u0435\u043d\u0438\u0435 OpenThread Border Router \u0443\u0436\u0435 \u0437\u0430\u043f\u0443\u0449\u0435\u043d\u043e, \u0435\u0433\u043e \u043d\u0435\u043b\u044c\u0437\u044f \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u0438\u0442\u044c \u0441\u043d\u043e\u0432\u0430.",
             "otbr_still_using_stick": "\u0423\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e {model} \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442\u0441\u044f \u0434\u043e\u043f\u043e\u043b\u043d\u0435\u043d\u0438\u0435\u043c \"OpenThread Border Router\". \u0415\u0441\u043b\u0438 \u0441\u0435\u0442\u044c Thread \u0441\u0435\u0439\u0447\u0430\u0441 \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442\u0441\u044f, \u0443\u0431\u0435\u0434\u0438\u0442\u0435\u0441\u044c, \u0447\u0442\u043e \u0443 \u0412\u0430\u0441 \u0435\u0441\u0442\u044c \u0430\u043b\u044c\u0442\u0435\u0440\u043d\u0430\u0442\u0438\u0432\u043d\u044b\u0435 \u0433\u0440\u0430\u043d\u0438\u0447\u043d\u044b\u0435 \u043c\u0430\u0440\u0448\u0440\u0443\u0442\u0438\u0437\u0430\u0442\u043e\u0440\u044b. \u0423\u0434\u0430\u043b\u0438\u0442\u0435 \u0434\u043e\u043f\u043e\u043b\u043d\u0435\u043d\u0438\u0435 \u0438 \u043f\u043e\u0432\u0442\u043e\u0440\u0438\u0442\u0435 \u043f\u043e\u043f\u044b\u0442\u043a\u0443.",
             "read_hw_settings_error": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u0441\u0447\u0438\u0442\u0430\u0442\u044c \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438 \u043e\u0431\u043e\u0440\u0443\u0434\u043e\u0432\u0430\u043d\u0438\u044f",
-            "unsupported_firmware": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043e\u043f\u0440\u0435\u0434\u0435\u043b\u0438\u0442\u044c \u043f\u0440\u043e\u0448\u0438\u0432\u043a\u0443 \u0440\u0430\u0434\u0438\u043e \u043d\u0430 \u0432\u0430\u0448\u0435\u043c {model}. \u0423\u0431\u0435\u0434\u0438\u0442\u0435\u0441\u044c, \u0447\u0442\u043e \u043d\u0438\u043a\u0430\u043a\u0430\u044f \u0434\u0440\u0443\u0433\u0430\u044f \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u044f \u0438\u043b\u0438 \u0434\u043e\u043f\u043e\u043b\u043d\u0435\u043d\u0438\u0435 \u0432 \u0434\u0430\u043d\u043d\u044b\u0439 \u043c\u043e\u043c\u0435\u043d\u0442 \u043d\u0435 \u043f\u044b\u0442\u0430\u0435\u0442\u0441\u044f \u0441\u0432\u044f\u0437\u0430\u0442\u044c\u0441\u044f \u0441 \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e\u043c.",
             "write_hw_settings_error": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u0437\u0430\u043f\u0438\u0441\u0430\u0442\u044c \u043d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0438 \u043e\u0431\u043e\u0440\u0443\u0434\u043e\u0432\u0430\u043d\u0438\u044f",
             "zha_migration_failed": "\u041c\u0438\u0433\u0440\u0430\u0446\u0438\u044f ZHA \u043d\u0435 \u0443\u0434\u0430\u043b\u0430\u0441\u044c.",
             "zha_still_using_stick": "\u0423\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e {model} \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442\u0441\u044f \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u0435\u0439 \"Zigbee Home Automation\". \u041f\u0435\u0440\u0435\u043d\u0435\u0441\u0438\u0442\u0435 \u0441\u0432\u043e\u044e \u0441\u0435\u0442\u044c Zigbee \u043d\u0430 \u0434\u0440\u0443\u0433\u043e\u0439 \u0430\u0434\u0430\u043f\u0442\u0435\u0440 \u0438\u043b\u0438 \u0443\u0434\u0430\u043b\u0438\u0442\u0435 \u0438\u043d\u0442\u0435\u0433\u0440\u0430\u0446\u0438\u044e \u0438 \u043f\u043e\u0432\u0442\u043e\u0440\u0438\u0442\u0435 \u043f\u043e\u043f\u044b\u0442\u043a\u0443."

homeassistant/components/homeassistant_yellow/translations/sk.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "Doplnok OpenThread Border Router je u\u017e spusten\u00fd, nie je mo\u017en\u00e9 ho znova nain\u0161talova\u0165.",
             "otbr_still_using_stick": "T\u00fato str\u00e1nku {model} pou\u017e\u00edva doplnok OpenThread Border Router. Ak pou\u017e\u00edvate sie\u0165 Thread, uistite sa, \u017ee m\u00e1te alternat\u00edvne Border Routre. Odin\u0161talujte doplnok a sk\u00faste to znova.",
             "read_hw_settings_error": "Nepodarilo sa pre\u010d\u00edta\u0165 nastavenia hardv\u00e9ru",
-            "unsupported_firmware": "Firmv\u00e9r r\u00e1dia na str\u00e1nke {model} sa nepodarilo ur\u010di\u0165. Uistite sa, \u017ee sa so zariaden\u00edm pr\u00e1ve nepok\u00fa\u0161a komunikova\u0165 \u017eiadna in\u00e1 integr\u00e1cia alebo doplnok.",
             "write_hw_settings_error": "Nepodarilo sa zap\u00edsa\u0165 nastavenia hardv\u00e9ru",
             "zha_migration_failed": "Migr\u00e1cia ZHA nebola \u00faspe\u0161n\u00e1.",
             "zha_still_using_stick": "T\u00e1to str\u00e1nka {model} sa pou\u017e\u00edva v r\u00e1mci integr\u00e1cie Zigbee Home Automation. Presu\u0148te svoju sie\u0165 Zigbee na in\u00fd adapt\u00e9r alebo odstr\u00e1\u0148te integr\u00e1ciu a sk\u00faste to znova."

homeassistant/components/homeassistant_yellow/translations/sv.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "Till\u00e4gget OpenThread-gr\u00e4nsrouter \u00e4r redan ig\u00e5ng, det kan inte installeras igen.",
             "otbr_still_using_stick": "Denna {model} anv\u00e4nds av till\u00e4gget OpenThread-gr\u00e4nsrouter. Om du anv\u00e4nder Thread-n\u00e4tverket, se till att du har alternativa gr\u00e4nsroutrar. Avinstallera till\u00e4gget och f\u00f6rs\u00f6k igen.",
             "read_hw_settings_error": "Misslyckades med att l\u00e4sa h\u00e5rdvaruinst\u00e4llningarna",
-            "unsupported_firmware": "Radions firmware p\u00e5 din {model} kunde inte fastst\u00e4llas. Se till att ingen annan integration eller till\u00e4gg f\u00f6r n\u00e4rvarande f\u00f6rs\u00f6ker kommunicera med enheten.",
             "write_hw_settings_error": "Misslyckades med att skriva h\u00e5rdvaruinst\u00e4llningar",
             "zha_migration_failed": "ZHA migreringen misslyckades",
             "zha_still_using_stick": "Denna {model} anv\u00e4nds av Zigbee Home Automation-integrationen. Migrera ditt Zigbee-n\u00e4tverk till en annan adapter eller ta bort integrationen och f\u00f6rs\u00f6k igen."

homeassistant/components/homeassistant_yellow/translations/tr.json

@@ -11,7 +11,6 @@
             "otbr_addon_already_running": "OpenThread Border Router eklentisi zaten \u00e7al\u0131\u015f\u0131yor, tekrar y\u00fcklenemez.",
             "otbr_still_using_stick": "Bu {model} OpenThread Border Router eklentisi taraf\u0131ndan kullan\u0131l\u0131yor. Thread a\u011f\u0131n\u0131 kullan\u0131yorsan\u0131z alternatif border router'lar\u0131n\u0131z oldu\u011fundan emin olun. Eklentiyi kald\u0131r\u0131n ve tekrar deneyin.",
             "read_hw_settings_error": "Donan\u0131m ayarlar\u0131 okunamad\u0131",
-            "unsupported_firmware": "{model} cihaz\u0131n\u0131zdaki radyo yaz\u0131l\u0131m\u0131 belirlenemedi. \u015eu anda cihazla ileti\u015fim kurmaya \u00e7al\u0131\u015fan ba\u015fka bir entegrasyon veya eklenti olmad\u0131\u011f\u0131ndan emin olun.",
             "write_hw_settings_error": "Donan\u0131m ayarlar\u0131 yaz\u0131lamad\u0131",
             "zha_migration_failed": "ZHA ge\u00e7i\u015fi ba\u015far\u0131l\u0131 olmad\u0131.",
             "zha_still_using_stick": "Bu {model} Zigbee Ev Otomasyonu entegrasyonu taraf\u0131ndan kullan\u0131l\u0131yor. L\u00fctfen Zigbee a\u011f\u0131n\u0131z\u0131 ba\u015fka bir adapt\u00f6re ta\u015f\u0131y\u0131n veya entegrasyonu silin ve tekrar deneyin."

homeassistant/components/homeassistant_yellow/translations/zh-Hans.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "OpenThread \u8fb9\u754c\u8def\u7531\u5668\u52a0\u8f7d\u9879\u5df2\u5728\u8fd0\u884c\u4e2d\uff0c\u65e0\u6cd5\u518d\u6b21\u5b89\u88c5\u3002",
             "otbr_still_using_stick": "\u6b64\u201c{model}\u201d\u6b63\u7531 OpenThread \u8fb9\u754c\u8def\u7531\u5668\u52a0\u8f7d\u9879\u4f7f\u7528\u3002\u5982\u679c\u60a8\u4f7f\u7528 Thread \u7f51\u7edc\uff0c\u8bf7\u786e\u4fdd\u60a8\u6709\u66ff\u4ee3\u8fb9\u754c\u8def\u7531\u5668\u3002\u5378\u8f7d\u6b64\u52a0\u8f7d\u9879\u5e76\u91cd\u8bd5\u3002",
             "read_hw_settings_error": "\u65e0\u6cd5\u8bfb\u53d6\u786c\u4ef6\u8bbe\u7f6e",
-            "unsupported_firmware": "\u65e0\u6cd5\u786e\u5b9a\u60a8 {model} \u4e0a\u7684\u65e0\u7ebf\u7535\u56fa\u4ef6\u3002\u8bf7\u786e\u4fdd\u5f53\u524d\u6ca1\u6709\u5176\u5b83\u96c6\u6210\u6216\u63d2\u4ef6\u6b63\u5c1d\u8bd5\u4e0e\u6b64\u8bbe\u5907\u901a\u4fe1\u3002",
             "write_hw_settings_error": "\u65e0\u6cd5\u5199\u5165\u786c\u4ef6\u8bbe\u7f6e",
             "zha_migration_failed": "ZHA \u8fc1\u79fb\u672a\u6210\u529f\u3002",
             "zha_still_using_stick": "\u6b64\u201c{model}\u201d\u6b63\u5728\u7531 Zigbee \u5bb6\u5ead\u81ea\u52a8\u5316\u96c6\u6210\u4f7f\u7528\u3002\u8bf7\u5c06\u60a8\u7684 Zigbee \u7f51\u7edc\u8fc1\u79fb\u5230\u53e6\u4e00\u4e2a\u9002\u914d\u5668\u6216\u8005\u5220\u9664\u6b64\u96c6\u6210\u5e76\u91cd\u8bd5\u3002"

homeassistant/components/homeassistant_yellow/translations/zh-Hant.json

@@ -18,7 +18,6 @@
             "otbr_addon_already_running": "OpenThread \u908a\u754c\u8def\u7531\u5668\uff08OTBR\uff09\u9644\u52a0\u5143\u4ef6\u5df2\u5728\u57f7\u884c\u4e2d\u3001\u7121\u6cd5\u518d\u6b21\u5b89\u88dd\u3002",
             "otbr_still_using_stick": "\u8a72 {model} \u6b63\u7531 OpenThread \u908a\u754c\u8def\u7531\u5668\u9644\u52a0\u5143\u4ef6\u4f7f\u7528\u4e2d\u3002\u5047\u5982\u6b63\u4f7f\u7528 Thread \u7db2\u8def\u3001\u8acb\u78ba\u5b9a\u5df2\u7d93\u64c1\u6709\u66ff\u4ee3\u7684\u908a\u754c\u8def\u7531\u5668\u3001\u79fb\u9664\u8a72\u9644\u52a0\u5143\u4ef6\u5f8c\u518d\u8a66\u4e00\u6b21\u3002",
             "read_hw_settings_error": "\u8b80\u53d6\u786c\u9ad4\u8a2d\u5b9a\u5931\u6557",
-            "unsupported_firmware": "\u7121\u6cd5\u78ba\u8a8d {model} \u4e0a\u6240\u4f7f\u7528\u7684\u7121\u7dda\u96fb\u97cc\u9ad4\u7248\u672c\u3002\u8acb\u78ba\u8a8d\u76ee\u524d\u6c92\u6709\u5b89\u88dd\u5176\u4ed6\u6574\u5408\u6216\u9644\u52a0\u5143\u4ef6\u3001\u6b63\u8a66\u5716\u8207\u8a72\u88dd\u7f6e\u901a\u8a0a\u4e2d\u3002",
             "write_hw_settings_error": "\u5beb\u5165\u786c\u9ad4\u8a2d\u5b9a\u5931\u6557",
             "zha_migration_failed": "ZHA \u9077\u79fb\u672a\u6210\u529f\u3002",
             "zha_still_using_stick": "\u8a72 {model} \u6b63\u7531 Zigbee Home Automation\uff08ZHA\uff09\u6574\u5408\u4f7f\u7528\u4e2d\u3002\u8acb\u5c07 Zigbee \u7db2\u8def\u9077\u79fb\u5230\u5176\u4ed6\u914d\u63a5\u5668\u3001\u6216\u522a\u9664\u6574\u5408\u4e26\u518d\u8a66\u4e00\u6b21\u3002"

homeassistant/components/input_number/translations/sv.json

@@ -14,10 +14,10 @@
                     "name": "Initialt v\u00e4rde"
                 },
                 "max": {
-                    "name": "Maximum"
+                    "name": "H\u00f6gst"
                 },
                 "min": {
-                    "name": "Minimum"
+                    "name": "L\u00e4gst"
                 },
                 "mode": {
                     "name": "L\u00e4ge",

homeassistant/components/input_text/translations/sv.json

@@ -11,7 +11,7 @@
                     }
                 },
                 "max": {
-                    "name": "Maxl\u00e4ngd"
+                    "name": "St\u00f6rsta l\u00e4ngd"
                 },
                 "min": {
                     "name": "Minsta l\u00e4ngd"

homeassistant/components/iron_os/manifest.json

@@ -14,5 +14,5 @@
   "iot_class": "local_polling",
   "loggers": ["pynecil"],
   "quality_scale": "platinum",
-  "requirements": ["pynecil==4.1.0"]
+  "requirements": ["pynecil==4.1.1"]
 }

homeassistant/components/lamarzocco/entity.py

@@ -2,8 +2,10 @@
 
 from collections.abc import Callable
 from dataclasses import dataclass
+from typing import cast
 
-from pylamarzocco.const import FirmwareType
+from pylamarzocco.const import FirmwareType, MachineState, WidgetType
+from pylamarzocco.models import MachineStatus
 
 from homeassistant.const import CONF_ADDRESS, CONF_MAC
 from homeassistant.helpers.device_registry import (
@@ -32,6 +34,7 @@ class LaMarzoccoBaseEntity(
     """Common elements for all entities."""
 
     _attr_has_entity_name = True
+    _unavailable_when_machine_off = True
 
     def __init__(
         self,
@@ -63,6 +66,21 @@ class LaMarzoccoBaseEntity(
         if connections:
             self._attr_device_info.update(DeviceInfo(connections=connections))
 
+    @property
+    def available(self) -> bool:
+        """Return True if entity is available."""
+        machine_state = (
+            cast(
+                MachineStatus,
+                self.coordinator.device.dashboard.config[WidgetType.CM_MACHINE_STATUS],
+            ).status
+            if WidgetType.CM_MACHINE_STATUS in self.coordinator.device.dashboard.config
+            else MachineState.OFF
+        )
+        return super().available and not (
+            self._unavailable_when_machine_off and machine_state is MachineState.OFF
+        )
+
 
 class LaMarzoccoEntity(LaMarzoccoBaseEntity):
     """Common elements for all entities."""

homeassistant/components/lamarzocco/number.py

@@ -58,10 +58,6 @@ ENTITIES: tuple[LaMarzoccoNumberEntityDescription, ...] = (
                 CoffeeBoiler, machine.dashboard.config[WidgetType.CM_COFFEE_BOILER]
             ).target_temperature
         ),
-        available_fn=(
-            lambda coordinator: WidgetType.CM_COFFEE_BOILER
-            in coordinator.device.dashboard.config
-        ),
     ),
     LaMarzoccoNumberEntityDescription(
         key="smart_standby_time",

homeassistant/components/lamarzocco/sensor.py

@@ -57,10 +57,6 @@ ENTITIES: tuple[LaMarzoccoSensorEntityDescription, ...] = (
             ).ready_start_time
         ),
         entity_category=EntityCategory.DIAGNOSTIC,
-        available_fn=(
-            lambda coordinator: WidgetType.CM_COFFEE_BOILER
-            in coordinator.device.dashboard.config
-        ),
     ),
     LaMarzoccoSensorEntityDescription(
         key="steam_boiler_ready_time",
@@ -188,6 +184,8 @@ class LaMarzoccoSensorEntity(LaMarzoccoEntity, SensorEntity):
 class LaMarzoccoStatisticSensorEntity(LaMarzoccoSensorEntity):
     """Sensor for La Marzocco statistics."""
 
+    _unavailable_when_machine_off = False
+
     @property
     def native_value(self) -> StateType | datetime | None:
         """Return the value of the sensor."""

homeassistant/components/minecraft_server/translations/sv.json

@@ -48,7 +48,7 @@
                 "name": "Spelare online"
             },
             "protocol_version": {
-                "name": "Protokoll version"
+                "name": "Protokollversion"
             },
             "version": {
                 "name": "Version"

homeassistant/components/motioneye/translations/sv.json

@@ -18,7 +18,7 @@
             "user": {
                 "data": {
                     "admin_password": "Administrat\u00f6rsl\u00f6senord",
-                    "admin_username": "Admin Anv\u00e4ndarnamn",
+                    "admin_username": "Administrat\u00f6rsanv\u00e4ndarnamn",
                     "surveillance_password": "L\u00f6senord f\u00f6r \u00f6vervakning",
                     "surveillance_username": "Anv\u00e4ndarnamn f\u00f6r \u00f6vervakning",
                     "url": "URL"

homeassistant/components/mqtt/translations/cs.json

@@ -221,6 +221,8 @@
                         "unit_of_measurement": "M\u011brn\u00e1 jednotka"
                     },
                     "data_description": {
+                        "device_class": "T\u0159\u00edda za\u0159\u00edzen\u00ed entity {platform}. [Dal\u0161\u00ed informace.]({url}#device_class)",
+                        "entity_category": "Povol\u00ed ozna\u010den\u00ed entity jako nastaven\u00ed za\u0159\u00edzen\u00ed nebo diagnostika. Entita s kategori\u00ed nebude vystavena cloudov\u00fdm komponent\u00e1m, komponent\u00e1m Alexy ani Google Assistantovi, ani nebude zahrnuta do nep\u0159\u00edm\u00fdch vol\u00e1n\u00ed akc\u00ed pro za\u0159\u00edzen\u00ed nebo oblasti. Entit\u00e1m senzor\u016f nelze p\u0159i\u0159adit t\u0159\u00eddu nastaven\u00ed za\u0159\u00edzen\u00ed. [V\u00edce informac\u00ed.](https://developers.home-assistant.io/docs/core/entity/#registry-properties)",
                         "fan_feature_direction": "Ventil\u00e1tor podporuje sm\u011br.",
                         "fan_feature_oscillation": "Ventil\u00e1tor podporuje kmit\u00e1n\u00ed.",
                         "fan_feature_preset_modes": "Ventil\u00e1tor podporuje p\u0159edvolby.",
@@ -1021,5 +1023,22 @@
             "description": "Znovu na\u010dte entity MQTT z nastaven\u00ed YAML.",
             "name": "Znovu na\u010d\u00edst"
         }
+    },
+    "triggers": {
+        "mqtt": {
+            "description": "Kdy\u017e je p\u0159ijata konkr\u00e9tn\u00ed zpr\u00e1va na dan\u00e9 t\u00e9ma MQTT.",
+            "description_configured": "Kdy\u017e byla p\u0159ijata zpr\u00e1va MQTT",
+            "fields": {
+                "payload": {
+                    "description": "Datov\u00e1 \u010d\u00e1st, kter\u00e1 se m\u00e1 spustit.",
+                    "name": "Datov\u00e1 \u010d\u00e1st"
+                },
+                "topic": {
+                    "description": "T\u00e9ma MQTT k poslechu.",
+                    "name": "T\u00e9ma"
+                }
+            },
+            "name": "MQTT"
+        }
     }
 }

homeassistant/components/ntfy/translations/sv.json

@@ -169,6 +169,7 @@
                 "unit_of_measurement": "meddelanden"
             },
             "messages_remaining": {
+                "name": "\u00c5terst\u00e5ende meddelanden",
                 "unit_of_measurement": "meddelanden"
             },
             "reservations": {

homeassistant/components/number/translations/sv.json

@@ -12,10 +12,10 @@
             "name": "Nummer",
             "state_attributes": {
                 "max": {
-                    "name": "Maximum"
+                    "name": "H\u00f6gst"
                 },
                 "min": {
-                    "name": "Minimum"
+                    "name": "L\u00e4gst"
                 },
                 "mode": {
                     "name": "L\u00e4ge",

homeassistant/components/nut/config_flow.py

@@ -39,10 +39,12 @@ def _base_schema(
     base_schema = {
         vol.Optional(CONF_HOST, default=nut_config.get(CONF_HOST) or DEFAULT_HOST): str,
         vol.Optional(CONF_PORT, default=nut_config.get(CONF_PORT) or DEFAULT_PORT): int,
-        vol.Optional(CONF_USERNAME, default=nut_config.get(CONF_USERNAME) or ""): str,
+        vol.Optional(
+            CONF_USERNAME, default=nut_config.get(CONF_USERNAME, vol.UNDEFINED)
+        ): str,
         vol.Optional(
             CONF_PASSWORD,
-            default=PASSWORD_NOT_CHANGED if use_password_not_changed else "",
+            default=PASSWORD_NOT_CHANGED if use_password_not_changed else vol.UNDEFINED,
         ): str,
     }
 

homeassistant/components/ollama/__init__.py

@@ -133,6 +133,12 @@ async def async_migrate_integration(hass: HomeAssistant) -> None:
                     device.id,
                     remove_config_entry_id=entry.entry_id,
                 )
+            else:
+                device_registry.async_update_device(
+                    device.id,
+                    remove_config_entry_id=entry.entry_id,
+                    remove_config_subentry_id=None,
+                )
 
         if not use_existing:
             await hass.config_entries.async_remove(entry.entry_id)

homeassistant/components/ollama/translations/sv.json

@@ -26,6 +26,7 @@
     "config_subentries": {
         "conversation": {
             "abort": {
+                "entry_not_loaded": "Det g\u00e5r inte att l\u00e4gga till saker n\u00e4r konfigurationen \u00e4r inaktiverad.",
                 "reconfigure_successful": "Omkonfigureringen lyckades"
             },
             "step": {

homeassistant/components/openai_conversation/__init__.py

@@ -346,6 +346,12 @@ async def async_migrate_integration(hass: HomeAssistant) -> None:
                     device.id,
                     remove_config_entry_id=entry.entry_id,
                 )
+            else:
+                device_registry.async_update_device(
+                    device.id,
+                    remove_config_entry_id=entry.entry_id,
+                    remove_config_subentry_id=None,
+                )
 
         if not use_existing:
             await hass.config_entries.async_remove(entry.entry_id)

homeassistant/components/openai_conversation/translations/sv.json

@@ -46,6 +46,10 @@
                         "user_location": "Inkludera hemplats",
                         "web_search": "Aktivera webbs\u00f6kning"
                     },
+                    "data_description": {
+                        "user_location": "F\u00f6rfina s\u00f6kresultaten baserat p\u00e5 geografi",
+                        "web_search": "Till\u00e5t modellen att s\u00f6ka p\u00e5 webben efter den senaste informationen innan ett svar genereras"
+                    },
                     "title": "Modellspecifika alternativ"
                 }
             }

homeassistant/components/playstation_network/diagnostics.py

@@ -0,0 +1,55 @@
+"""Diagnostics support for PlayStation Network."""
+
+from __future__ import annotations
+
+from dataclasses import asdict
+from typing import Any
+
+from psnawp_api.models.trophies import PlatformType
+
+from homeassistant.components.diagnostics import async_redact_data
+from homeassistant.core import HomeAssistant
+
+from .coordinator import PlaystationNetworkConfigEntry, PlaystationNetworkCoordinator
+
+TO_REDACT = {
+    "account_id",
+    "firstName",
+    "lastName",
+    "middleName",
+    "onlineId",
+    "url",
+    "username",
+}
+
+
+async def async_get_config_entry_diagnostics(
+    hass: HomeAssistant, entry: PlaystationNetworkConfigEntry
+) -> dict[str, Any]:
+    """Return diagnostics for a config entry."""
+    coordinator: PlaystationNetworkCoordinator = entry.runtime_data
+
+    return {
+        "data": async_redact_data(
+            _serialize_platform_types(asdict(coordinator.data)), TO_REDACT
+        ),
+    }
+
+
+def _serialize_platform_types(data: Any) -> Any:
+    """Recursively convert PlatformType enums to strings in dicts and sets."""
+    if isinstance(data, dict):
+        return {
+            (
+                platform.value if isinstance(platform, PlatformType) else platform
+            ): _serialize_platform_types(record)
+            for platform, record in data.items()
+        }
+    if isinstance(data, set):
+        return [
+            record.value if isinstance(record, PlatformType) else record
+            for record in data
+        ]
+    if isinstance(data, PlatformType):
+        return data.value
+    return data

homeassistant/components/playstation_network/quality_scale.yaml

@@ -44,7 +44,7 @@ rules:
 
   # Gold
   devices: done
-  diagnostics: todo
+  diagnostics: done
   discovery-update-info:
     status: exempt
     comment: Discovery flow is not applicable for this integration