homeassistant 2025.6.3__py3-none-any.whl → 2025.7.0__py3-none-any.whl

homeassistant/components/zwave_js/strings.json

@@ -15,12 +15,12 @@
       "config_entry_not_loaded": "The Z-Wave configuration entry is not loaded. Please try again when the configuration entry is loaded.",
       "different_device": "The connected USB device is not the same as previously configured for this config entry. Please instead create a new config entry for the new device.",
       "discovery_requires_supervisor": "Discovery requires the supervisor.",
-      "migration_low_sdk_version": "The SDK version of the old controller is lower than {ok_sdk_version}. This means it's not possible to migrate the Non Volatile Memory (NVM) of the old controller to another controller.\n\nCheck the documentation on the manufacturer support pages of the old controller, if it's possible to upgrade the firmware of the old controller to a version that is build with SDK version {ok_sdk_version} or higher.",
+      "migration_low_sdk_version": "The SDK version of the old adapter is lower than {ok_sdk_version}. This means it's not possible to migrate the Non Volatile Memory (NVM) of the old adapter to another adapter.\n\nCheck the documentation on the manufacturer support pages of the old adapter, if it's possible to upgrade the firmware of the old adapter to a version that is built with SDK version {ok_sdk_version} or higher.",
       "migration_successful": "Migration successful.",
       "not_zwave_device": "Discovered device is not a Z-Wave device.",
       "not_zwave_js_addon": "Discovered add-on is not the official Z-Wave add-on.",
       "reconfigure_successful": "[%key:common::config_flow::abort::reconfigure_successful%]",
-      "reset_failed": "Failed to reset controller.",
+      "reset_failed": "Failed to reset adapter.",
       "usb_ports_failed": "Failed to get USB devices."
     },
     "error": {
@@ -31,33 +31,45 @@
     },
     "flow_title": "{name}",
     "progress": {
-      "install_addon": "Please wait while the Z-Wave add-on installation finishes. This can take several minutes.",
-      "start_addon": "Please wait while the Z-Wave add-on start completes. This may take some seconds.",
-      "backup_nvm": "Please wait while the network backup completes.",
-      "restore_nvm": "Please wait while the network restore completes."
+      "install_addon": "Installation can take several minutes",
+      "start_addon": "Starting add-on",
+      "backup_nvm": "Please wait while the network backup completes",
+      "restore_nvm": "Please wait while the network restore completes"
     },
     "step": {
       "configure_addon_user": {
+        "data": {
+          "usb_path": "[%key:common::config_flow::data::usb_path%]"
+        },
+        "description": "Select your Z-Wave adapter",
+        "title": "Enter the Z-Wave add-on configuration"
+      },
+      "network_type": {
+        "data": {
+          "network_type": "Is your network new or does it already exist?"
+        },
+        "title": "Z-Wave network"
+      },
+      "configure_security_keys": {
         "data": {
           "lr_s2_access_control_key": "Long Range S2 Access Control Key",
           "lr_s2_authenticated_key": "Long Range S2 Authenticated Key",
           "s0_legacy_key": "S0 Key (Legacy)",
           "s2_access_control_key": "S2 Access Control Key",
           "s2_authenticated_key": "S2 Authenticated Key",
-          "s2_unauthenticated_key": "S2 Unauthenticated Key",
-          "usb_path": "[%key:common::config_flow::data::usb_path%]"
+          "s2_unauthenticated_key": "S2 Unauthenticated Key"
         },
-        "description": "The add-on will generate security keys if those fields are left empty.",
-        "title": "Enter the Z-Wave add-on configuration"
+        "description": "Enter the security keys for your existing Z-Wave network",
+        "title": "Security keys"
       },
       "configure_addon_reconfigure": {
         "data": {
-          "lr_s2_access_control_key": "[%key:component::zwave_js::config::step::configure_addon_user::data::lr_s2_access_control_key%]",
-          "lr_s2_authenticated_key": "[%key:component::zwave_js::config::step::configure_addon_user::data::lr_s2_authenticated_key%]",
-          "s0_legacy_key": "[%key:component::zwave_js::config::step::configure_addon_user::data::s0_legacy_key%]",
-          "s2_access_control_key": "[%key:component::zwave_js::config::step::configure_addon_user::data::s2_access_control_key%]",
-          "s2_authenticated_key": "[%key:component::zwave_js::config::step::configure_addon_user::data::s2_authenticated_key%]",
-          "s2_unauthenticated_key": "[%key:component::zwave_js::config::step::configure_addon_user::data::s2_unauthenticated_key%]",
+          "lr_s2_access_control_key": "[%key:component::zwave_js::config::step::configure_security_keys::data::lr_s2_access_control_key%]",
+          "lr_s2_authenticated_key": "[%key:component::zwave_js::config::step::configure_security_keys::data::lr_s2_authenticated_key%]",
+          "s0_legacy_key": "[%key:component::zwave_js::config::step::configure_security_keys::data::s0_legacy_key%]",
+          "s2_access_control_key": "[%key:component::zwave_js::config::step::configure_security_keys::data::s2_access_control_key%]",
+          "s2_authenticated_key": "[%key:component::zwave_js::config::step::configure_security_keys::data::s2_authenticated_key%]",
+          "s2_unauthenticated_key": "[%key:component::zwave_js::config::step::configure_security_keys::data::s2_unauthenticated_key%]",
           "usb_path": "[%key:common::config_flow::data::usb_path%]"
         },
         "description": "[%key:component::zwave_js::config::step::configure_addon_user::description%]",
@@ -67,7 +79,7 @@
         "description": "Do you want to set up the Z-Wave integration with the Z-Wave add-on?"
       },
       "install_addon": {
-        "title": "The Z-Wave add-on installation has started"
+        "title": "Installing add-on"
       },
       "manual": {
         "data": {
@@ -94,7 +106,7 @@
         "title": "[%key:component::zwave_js::config::step::on_supervisor::title%]"
       },
       "start_addon": {
-        "title": "The Z-Wave add-on is starting."
+        "title": "Configuring add-on"
       },
       "zeroconf_confirm": {
         "description": "Do you want to add the Z-Wave Server with home ID {home_id} found at {url} to Home Assistant?",
@@ -102,23 +114,19 @@
       },
       "reconfigure": {
         "title": "Migrate or re-configure",
-        "description": "Are you migrating to a new controller or re-configuring the current controller?",
+        "description": "Are you migrating to a new adapter or re-configuring the current adapter?",
         "menu_options": {
-          "intent_migrate": "Migrate to a new controller",
-          "intent_reconfigure": "Re-configure the current controller"
+          "intent_migrate": "Migrate to a new adapter",
+          "intent_reconfigure": "Re-configure the current adapter"
         }
       },
-      "intent_migrate": {
-        "title": "[%key:component::zwave_js::config::step::reconfigure::menu_options::intent_migrate%]",
-        "description": "Before setting up your new controller, your old controller needs to be reset. A backup will be performed first.\n\nDo you wish to continue?"
-      },
       "instruct_unplug": {
-        "title": "Unplug your old controller",
-        "description": "Backup saved to \"{file_path}\"\n\nYour old controller has been reset. If the hardware is no longer needed, you can now unplug it.\n\nPlease make sure your new controller is plugged in before continuing."
+        "title": "Unplug your old adapter",
+        "description": "Backup saved to \"{file_path}\"\n\nYour old adapter has not been reset. You should now unplug it to prevent it from interfering with the new adapter.\n\nPlease make sure your new adapter is plugged in before continuing."
       },
       "restore_failed": {
         "title": "Restoring unsuccessful",
-        "description": "Your Z-Wave network could not be restored to the new controller. This means that your Z-Wave devices are not connected to Home Assistant.\n\nThe backup is saved to ”{file_path}”\n\n'<'a href=\"{file_url}\" download=\"{file_name}\"'>'Download backup file'<'/a'>'",
+        "description": "Your Z-Wave network could not be restored to the new adapter. This means that your Z-Wave devices are not connected to Home Assistant.\n\nThe backup is saved to ”{file_path}”\n\n'<'a href=\"{file_url}\" download=\"{file_name}\"'>'Download backup file'<'/a'>'",
         "submit": "Try again"
       },
       "choose_serial_port": {
@@ -129,7 +137,7 @@
       },
       "installation_type": {
         "title": "Set up Z-Wave",
-        "description": "In a few steps, we’re going to set up your Home Assistant Connect ZWA-2. Home Assistant can automatically install and configure the recommended Z-Wave setup, or you can customize it.",
+        "description": "In a few steps, we're going to set up your adapter. Home Assistant can automatically install and configure the recommended Z-Wave setup, or you can customize it.",
         "menu_options": {
           "intent_recommended": "Recommended installation",
           "intent_custom": "Custom installation"
@@ -281,12 +289,12 @@
       "fix_flow": {
         "step": {
           "confirm": {
-            "description": "A Z-Wave controller of model {controller_model} with a different ID ({new_unique_id}) than the previously connected controller ({old_unique_id}) was connected to the {config_entry_title} configuration entry.\n\nReasons for a different controller ID could be:\n\n1. The controller was factory reset, with a 3rd party application.\n2. A controller Non Volatile Memory (NVM) backup was restored to the controller, with a 3rd party application.\n3. A different controller was connected to this configuration entry.\n\nIf a different controller was connected, you should instead set up a new configuration entry for the new controller.\n\nIf you are sure that the current controller is the correct controller you can confirm this by pressing Submit, and the configuration entry will remember the new controller ID.",
-            "title": "An unknown controller was detected"
+            "description": "A Z-Wave adapter of model {controller_model} was connected to the {config_entry_title} configuration entry. This adapter has a different ID ({new_unique_id}) than the previously connected adapter ({old_unique_id}).\n\nReasons for a different adapter ID could be:\n\n1. The adapter was factory reset using a 3rd party application.\n2. A backup of the adapter's non-volatile memory was restored to the adapter using a 3rd party application.\n3. A different adapter was connected to this configuration entry.\n\nIf a different adapter was connected, you should instead set up a new configuration entry for the new adapter.\n\nIf you are sure that the current adapter is the correct adapter, confirm by pressing Submit. The configuration entry will remember the new adapter ID.",
+            "title": "An unknown adapter was detected"
           }
         }
       },
-      "title": "An unknown controller was detected"
+      "title": "An unknown adapter was detected"
     }
   },
   "services": {
@@ -626,5 +634,13 @@
       },
       "name": "Set a value (advanced)"
     }
+  },
+  "selector": {
+    "network_type": {
+      "options": {
+        "new": "It's new",
+        "existing": "It already exists"
+      }
+    }
   }
 }

homeassistant/components/zwave_js/translations/bg.json

@@ -29,12 +29,6 @@
                     "usb_path": "\u041f\u044a\u0442 \u0434\u043e USB \u0443\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u043e"
                 }
             },
-            "instruct_unplug": {
-                "title": "\u0418\u0437\u043a\u043b\u044e\u0447\u0435\u0442\u0435 \u0441\u0442\u0430\u0440\u0438\u044f \u0441\u0438 \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440"
-            },
-            "intent_migrate": {
-                "title": "\u041c\u0438\u0433\u0440\u0438\u0440\u0430\u043d\u0435 \u043a\u044a\u043c \u043d\u043e\u0432 \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440"
-            },
             "manual": {
                 "data": {
                     "url": "URL"
@@ -45,12 +39,13 @@
                     "url": "URL"
                 }
             },
-            "reconfigure": {
-                "description": "\u041c\u0438\u0433\u0440\u0438\u0440\u0430\u0442\u0435 \u043b\u0438 \u043a\u044a\u043c \u043d\u043e\u0432 \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440 \u0438\u043b\u0438 \u043f\u0440\u0435\u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0438\u0440\u0430\u0442\u0435 \u0442\u0435\u043a\u0443\u0449\u0438\u044f \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440?",
-                "menu_options": {
-                    "intent_migrate": "\u041c\u0438\u0433\u0440\u0438\u0440\u0430\u043d\u0435 \u043a\u044a\u043c \u043d\u043e\u0432 \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440",
-                    "intent_reconfigure": "\u041f\u0440\u0435\u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0438\u0440\u0430\u043d\u0435 \u043d\u0430 \u0442\u0435\u043a\u0443\u0449\u0438\u044f \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440"
+            "network_type": {
+                "data": {
+                    "network_type": "\u0412\u0430\u0448\u0430\u0442\u0430 \u043c\u0440\u0435\u0436\u0430 \u043d\u043e\u0432\u0430 \u043b\u0438 \u0435 \u0438\u043b\u0438 \u0432\u0435\u0447\u0435 \u0441\u044a\u0449\u0435\u0441\u0442\u0432\u0443\u0432\u0430?"
                 },
+                "title": "\u041c\u0440\u0435\u0436\u0430 Z-Wave"
+            },
+            "reconfigure": {
                 "title": "\u041c\u0438\u0433\u0440\u0438\u0440\u0430\u043d\u0435 \u0438\u043b\u0438 \u043f\u0440\u0435\u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0438\u0440\u0430\u043d\u0435"
             },
             "restore_failed": {
@@ -97,18 +92,6 @@
             }
         }
     },
-    "issues": {
-        "migrate_unique_id": {
-            "fix_flow": {
-                "step": {
-                    "confirm": {
-                        "title": "\u041e\u0442\u043a\u0440\u0438\u0442 \u0435 \u043d\u0435\u0438\u0437\u0432\u0435\u0441\u0442\u0435\u043d \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440"
-                    }
-                }
-            },
-            "title": "\u041e\u0442\u043a\u0440\u0438\u0442 \u0435 \u043d\u0435\u0438\u0437\u0432\u0435\u0441\u0442\u0435\u043d \u043a\u043e\u043d\u0442\u0440\u043e\u043b\u0435\u0440"
-        }
-    },
     "services": {
         "bulk_set_partial_config_parameters": {
             "fields": {

homeassistant/components/zwave_js/translations/cs.json

@@ -15,12 +15,10 @@
             "config_entry_not_loaded": "Konfigura\u010dn\u00ed polo\u017eka Z-Wave se nena\u010detla. Zkuste to znovu, a\u017e se na\u010dte.",
             "different_device": "P\u0159ipojen\u00e9 za\u0159\u00edzen\u00ed USB nen\u00ed stejn\u00e9 jako d\u0159\u00edve nastaven\u00e9 pro tuto polo\u017eku nastaven\u00ed. M\u00edsto toho vytvo\u0159te nov\u00fd konfigura\u010dn\u00ed z\u00e1znam pro nov\u00e9 za\u0159\u00edzen\u00ed.",
             "discovery_requires_supervisor": "Zji\u0161\u0165ov\u00e1n\u00ed vy\u017eaduje Supervizora.",
-            "migration_low_sdk_version": "Verze SDK star\u00e9ho \u0159adi\u010de je ni\u017e\u0161\u00ed ne\u017e {ok_sdk_version}. To znamen\u00e1, \u017ee nen\u00ed mo\u017en\u00e9 migrovat nevolatiln\u00ed pam\u011b\u0165 (NVM) star\u00e9ho \u0159adi\u010de na jin\u00fd \u0159adi\u010d. Zjist\u011bte v dokumentaci na str\u00e1nk\u00e1ch podpory v\u00fdrobce star\u00e9ho \u0159adi\u010de, zda je mo\u017en\u00e9 aktualizovat firmware star\u00e9ho \u0159adi\u010de na verzi, kter\u00e1 je sestavena s SDK verze {ok_sdk_version} nebo vy\u0161\u0161\u00ed.",
             "migration_successful": "Migrace byla \u00fasp\u011b\u0161n\u00e1.",
             "not_zwave_device": "Zji\u0161t\u011bn\u00e9 za\u0159\u00edzen\u00ed nen\u00ed za\u0159\u00edzen\u00ed Z-Wave.",
             "not_zwave_js_addon": "Zji\u0161t\u011bn\u00fd dopln\u011bk nen\u00ed ofici\u00e1ln\u00edm dopl\u0148kem Z-Wave.",
             "reconfigure_successful": "P\u0159enastaven\u00ed bylo \u00fasp\u011b\u0161n\u00e9",
-            "reset_failed": "Resetov\u00e1n\u00ed ovlada\u010de se nezda\u0159ilo.",
             "usb_ports_failed": "Nepoda\u0159ilo se z\u00edskat za\u0159\u00edzen\u00ed USB."
         },
         "error": {
@@ -31,10 +29,10 @@
         },
         "flow_title": "{name}",
         "progress": {
-            "backup_nvm": "Vy\u010dkejte, ne\u017e se dokon\u010d\u00ed z\u00e1lohov\u00e1n\u00ed s\u00edt\u011b.",
-            "install_addon": "Instalace m\u016f\u017ee trvat n\u011bkolik minut.",
-            "restore_nvm": "Vy\u010dkejte, ne\u017e se dokon\u010d\u00ed obnova s\u00edt\u011b.",
-            "start_addon": "Spou\u0161t\u011bn\u00ed dopl\u0148ku."
+            "backup_nvm": "Vy\u010dkejte, ne\u017e se dokon\u010d\u00ed z\u00e1lohov\u00e1n\u00ed s\u00edt\u011b",
+            "install_addon": "Instalace m\u016f\u017ee trvat n\u011bkolik minut",
+            "restore_nvm": "Vy\u010dkejte, ne\u017e se dokon\u010d\u00ed obnova s\u00edt\u011b",
+            "start_addon": "Spou\u0161t\u011bn\u00ed dopl\u0148ku"
         },
         "step": {
             "choose_serial_port": {
@@ -45,28 +43,16 @@
             },
             "configure_addon_reconfigure": {
                 "data": {
-                    "lr_s2_access_control_key": "Kl\u00ed\u010d pro \u0159\u00edzen\u00ed p\u0159\u00edstupu S2 s dlouh\u00fdm dosahem",
-                    "lr_s2_authenticated_key": "Kl\u00ed\u010d ov\u011b\u0159en\u00fd S2 s dlouh\u00fdm dosahem",
-                    "s0_legacy_key": "Kl\u00ed\u010d S0 (star\u0161\u00ed)",
-                    "s2_access_control_key": "P\u0159\u00edstupov\u00fd kl\u00ed\u010d S2",
-                    "s2_authenticated_key": "Ov\u011b\u0159en\u00fd kl\u00ed\u010d S2",
-                    "s2_unauthenticated_key": "Neov\u011b\u0159en\u00fd kl\u00ed\u010d S2",
                     "usb_path": "Cesta k USB za\u0159\u00edzen\u00ed"
                 },
-                "description": "Pokud tato pole z\u016fstanou pr\u00e1zdn\u00e1, dopln\u011bk vygeneruje bezpe\u010dnostn\u00ed kl\u00ed\u010de.",
+                "description": "Vyberte sv\u016fj adapt\u00e9r Z-Wave",
                 "title": "Zadat nastaven\u00ed dopl\u0148ku Z-Wave"
             },
             "configure_addon_user": {
                 "data": {
-                    "lr_s2_access_control_key": "Kl\u00ed\u010d pro \u0159\u00edzen\u00ed p\u0159\u00edstupu S2 s dlouh\u00fdm dosahem",
-                    "lr_s2_authenticated_key": "Kl\u00ed\u010d ov\u011b\u0159en\u00fd S2 s dlouh\u00fdm dosahem",
-                    "s0_legacy_key": "Kl\u00ed\u010d S0 (star\u0161\u00ed)",
-                    "s2_access_control_key": "P\u0159\u00edstupov\u00fd kl\u00ed\u010d S2",
-                    "s2_authenticated_key": "Ov\u011b\u0159en\u00fd kl\u00ed\u010d S2",
-                    "s2_unauthenticated_key": "Neov\u011b\u0159en\u00fd kl\u00ed\u010d S2",
                     "usb_path": "Cesta k USB za\u0159\u00edzen\u00ed"
                 },
-                "description": "Pokud tato pole z\u016fstanou pr\u00e1zdn\u00e1, dopln\u011bk vygeneruje bezpe\u010dnostn\u00ed kl\u00ed\u010de.",
+                "description": "Vyberte sv\u016fj adapt\u00e9r Z-Wave",
                 "title": "Zadat nastaven\u00ed dopl\u0148ku Z-Wave"
             },
             "hassio_confirm": {
@@ -76,21 +62,13 @@
                 "title": "Instalov\u00e1n\u00ed dopl\u0148ku"
             },
             "installation_type": {
-                "description": "V n\u011bkolika kroc\u00edch nastav\u00edme v\u00e1\u0161 Home Assistant Connect ZWA-2. Home Assistant m\u016f\u017ee automaticky nainstalovat a nakonfigurovat doporu\u010den\u00e9 nastaven\u00ed Z-Wave, nebo si ho m\u016f\u017eete p\u0159izp\u016fsobit.",
+                "description": "V n\u011bkolika kroc\u00edch nastav\u00edme v\u00e1\u0161 adapt\u00e9r. Home Assistant m\u016f\u017ee automaticky nainstalovat a nakonfigurovat doporu\u010den\u00e9 nastaven\u00ed Z-Wave, nebo si ho m\u016f\u017eete p\u0159izp\u016fsobit.",
                 "menu_options": {
                     "intent_custom": "Vlastn\u00ed instalace",
                     "intent_recommended": "Doporu\u010den\u00e1 instalace"
                 },
                 "title": "Nastavit Z-Wave"
             },
-            "instruct_unplug": {
-                "description": "Z\u00e1loha byla ulo\u017eena do \"{file_path}\".\n \nV\u00e1\u0161 star\u00fd ovlada\u010d byl resetov\u00e1n. Pokud ji\u017e hardware nepot\u0159ebujete, m\u016f\u017eete jej nyn\u00ed odpojit.\n\nNe\u017e budete pokra\u010dovat, ujist\u011bte se, \u017ee je v\u00e1\u0161 nov\u00fd ovlada\u010d zapojen.",
-                "title": "Odpojte star\u00fd ovlada\u010d"
-            },
-            "intent_migrate": {
-                "description": "P\u0159ed nastaven\u00edm nov\u00e9ho ovlada\u010de je t\u0159eba resetovat v\u00e1\u0161 star\u00fd ovlada\u010d. Nejprve bude provedena z\u00e1loha.\n\nChcete pokra\u010dovat?",
-                "title": "Migrujte na nov\u00fd \u0159adi\u010d"
-            },
             "manual": {
                 "data": {
                     "url": "URL"
@@ -116,15 +94,9 @@
                 "title": "Vybrat zp\u016fsob p\u0159ipojen\u00ed"
             },
             "reconfigure": {
-                "description": "Migrujete na nov\u00fd \u0159adi\u010d nebo m\u011bn\u00edte nastaven\u00ed st\u00e1vaj\u00edc\u00edho \u0159adi\u010de?",
-                "menu_options": {
-                    "intent_migrate": "Migrujte na nov\u00fd \u0159adi\u010d",
-                    "intent_reconfigure": "P\u0159enastavit aktu\u00e1ln\u00ed \u0159adi\u010d"
-                },
                 "title": "Migrovat nebo p\u0159enastavit"
             },
             "restore_failed": {
-                "description": "Va\u0161i s\u00ed\u0165 Z-Wave se nepoda\u0159ilo obnovit do nov\u00e9ho ovlada\u010de. To znamen\u00e1, \u017ee va\u0161e za\u0159\u00edzen\u00ed Z-Wave nejsou p\u0159ipojena k aplikaci Home Assistant.\n\nZ\u00e1loha je ulo\u017eena do slo\u017eky \"{file_path}\"\n\n'<'a href=\"{file_url}\" download=\"{file_name}\"'>St\u00e1hnout soubor se z\u00e1lohou'<'/a'>'",
                 "submit": "Zkusit znovu",
                 "title": "Obnoven\u00ed se nepoda\u0159ilo"
             },
@@ -276,17 +248,6 @@
         "invalid_server_version": {
             "description": "Verze Z-Wave Server, kterou aktu\u00e1ln\u011b pou\u017e\u00edv\u00e1te, je pro tuto verzi Home Assistanta p\u0159\u00edli\u0161 star\u00e1. Chcete-li tento probl\u00e9m vy\u0159e\u0161it, aktualizujte Z-Wave Server na nejnov\u011bj\u0161\u00ed verzi.",
             "title": "Je pot\u0159eba nov\u011bj\u0161\u00ed verze Z-Wave Server"
-        },
-        "migrate_unique_id": {
-            "fix_flow": {
-                "step": {
-                    "confirm": {
-                        "description": "K polo\u017ece nastaven\u00ed {config_entry_title} byl p\u0159ipojen ovlada\u010d Z-Wave, model {controller_model} s odli\u0161n\u00fdm ID ({new_unique_id}) ne\u017e d\u0159\u00edve p\u0159ipojen\u00fd ovlada\u010d ({old_unique_id}).\n\nD\u016fvody pro odli\u0161n\u00e9 ID ovlada\u010de mohou b\u00fdt:\n \n1. Ovlada\u010d byl resetov\u00e1n do tov\u00e1rn\u00edho nastaven\u00ed pomoc\u00ed aplikace t\u0159et\u00ed strany.\n2. Do ovlada\u010de byla obnovena z\u00e1loha energeticky nez\u00e1visl\u00e9 pam\u011bti (NVM) ovlada\u010de pomoc\u00ed aplikace t\u0159et\u00ed strany.\n3. K t\u00e9to polo\u017ece nastaven\u00ed byl p\u0159ipojen jin\u00fd ovlada\u010d.\n\nPokud byl p\u0159ipojen jin\u00fd ovlada\u010d, m\u011bli byste m\u00edsto toho nastavit novou polo\u017eku nastaven\u00ed pro nov\u00fd ovlada\u010d.\n\nPokud jste si jisti, \u017ee aktu\u00e1ln\u00ed ovlada\u010d je spr\u00e1vn\u00fd ovlada\u010d, m\u016f\u017eete to potvrdit stisknut\u00edm tla\u010d\u00edtka **Odeslat** a polo\u017eka nastaven\u00ed si zapamatuje nov\u00e9 ID ovlada\u010de.",
-                        "title": "Byl detekov\u00e1n nezn\u00e1m\u00fd ovlada\u010d"
-                    }
-                }
-            },
-            "title": "Byl detekov\u00e1n nezn\u00e1m\u00fd ovlada\u010d"
         }
     },
     "services": {

homeassistant/components/zwave_js/translations/de.json

@@ -15,12 +15,12 @@
             "config_entry_not_loaded": "Der Z-Wave-Konfigurationseintrag wurde nicht geladen. Bitte versuche es erneut, wenn der Konfigurationseintrag geladen ist.",
             "different_device": "Das angeschlossene USB-Ger\u00e4t ist nicht dasselbe, das zuvor f\u00fcr diesen Konfigurationseintrag konfiguriert wurde. Bitte erstelle stattdessen einen neuen Konfigurationseintrag f\u00fcr das neue Ger\u00e4t.",
             "discovery_requires_supervisor": "Discovery erfordert den Supervisor.",
-            "migration_low_sdk_version": "Die SDK-Version des alten Controllers ist niedriger als {ok_sdk_version}. Das bedeutet, dass es nicht m\u00f6glich ist, den nichtfl\u00fcchtigen Speicher (NVM) des alten Controllers auf einen anderen Controller zu migrieren. \n \nPr\u00fcfe in der Dokumentation auf den Supportseiten des Herstellers des alten Controllers, ob es m\u00f6glich ist, die Firmware des alten Controllers auf eine Version zu aktualisieren, die mit der SDK-Version {ok_sdk_version} oder h\u00f6her erstellt wurde.",
+            "migration_low_sdk_version": "Die SDK-Version des alten Adapters ist niedriger als {ok_sdk_version}. Das bedeutet, dass es nicht m\u00f6glich ist, den nichtfl\u00fcchtigen Speicher (NVM) des alten Adapters auf einen anderen Adapter zu migrieren. \n \nPr\u00fcfe in der Dokumentation auf den Supportseiten des Herstellers des alten Adapters, ob es m\u00f6glich ist, die Firmware des alten Adapters auf eine Version zu aktualisieren, die mit der SDK-Version {ok_sdk_version} oder h\u00f6her erstellt wurde.",
             "migration_successful": "Migration erfolgreich.",
             "not_zwave_device": "Entdecktes Ger\u00e4t ist kein Z-Wave-Ger\u00e4t.",
             "not_zwave_js_addon": "Das entdeckte Add-on ist nicht das offizielle Z-Wave-Add-on.",
             "reconfigure_successful": "Die Neukonfiguration war erfolgreich",
-            "reset_failed": "Fehler beim Zur\u00fccksetzen des Controllers.",
+            "reset_failed": "Das Zur\u00fccksetzen des Adapters ist fehlgeschlagen.",
             "usb_ports_failed": "USB-Ger\u00e4te konnten nicht abgerufen werden."
         },
         "error": {
@@ -31,10 +31,10 @@
         },
         "flow_title": "{name}",
         "progress": {
-            "backup_nvm": "Bitte warte, w\u00e4hrend die Netzwerksicherung abgeschlossen wird.",
-            "install_addon": "Die Installation kann mehrere Minuten dauern.",
-            "restore_nvm": "Bitte warte, bis die Netzwerkwiederherstellung abgeschlossen ist.",
-            "start_addon": "Add-on wird gestartet."
+            "backup_nvm": "Bitte warte, w\u00e4hrend die Netzwerksicherung abgeschlossen wird",
+            "install_addon": "Die Installation kann mehrere Minuten dauern",
+            "restore_nvm": "Bitte warte, bis die Netzwerkwiederherstellung abgeschlossen ist",
+            "start_addon": "Add-on wird gestartet"
         },
         "step": {
             "choose_serial_port": {
@@ -47,27 +47,33 @@
                 "data": {
                     "lr_s2_access_control_key": "Long Range S2 Access Control Key",
                     "lr_s2_authenticated_key": "Long Range S2 Authenticated Key",
-                    "s0_legacy_key": "S0 Key (Legacy)",
+                    "s0_legacy_key": "S0 Key (veraltet)",
                     "s2_access_control_key": "S2 Access Control Key",
                     "s2_authenticated_key": "S2 Authenticated Key",
                     "s2_unauthenticated_key": "S2 Unauthenticated Key",
                     "usb_path": "USB-Ger\u00e4te-Pfad"
                 },
-                "description": "Wenn diese Felder leer gelassen werden, generiert das Add-on Sicherheitsschl\u00fcssel.",
+                "description": "W\u00e4hle deinen Z-Wave-Adapter",
                 "title": "Konfiguration des Z-Wave-Add-ons"
             },
             "configure_addon_user": {
+                "data": {
+                    "usb_path": "USB-Ger\u00e4te-Pfad"
+                },
+                "description": "W\u00e4hle deinen Z-Wave-Adapter",
+                "title": "Konfiguration des Z-Wave-Add-ons"
+            },
+            "configure_security_keys": {
                 "data": {
                     "lr_s2_access_control_key": "Long Range S2 Access Control Key",
                     "lr_s2_authenticated_key": "Long Range S2 Authenticated Key",
-                    "s0_legacy_key": "S0 Key (Legacy)",
+                    "s0_legacy_key": "S0 Key (veraltet)",
                     "s2_access_control_key": "S2 Access Control Key",
                     "s2_authenticated_key": "S2 Authenticated Key",
-                    "s2_unauthenticated_key": "S2 Unauthenticated Key",
-                    "usb_path": "USB-Ger\u00e4te-Pfad"
+                    "s2_unauthenticated_key": "S2 Unauthenticated Key"
                 },
-                "description": "Wenn diese Felder leer gelassen werden, generiert das Add-on Sicherheitsschl\u00fcssel.",
-                "title": "Konfiguration des Z-Wave-Add-ons"
+                "description": "Gib die Sicherheitsschl\u00fcssel f\u00fcr dein vorhandenes Z-Wave-Netzwerk ein",
+                "title": "Sicherheitsschl\u00fcssel"
             },
             "hassio_confirm": {
                 "description": "M\u00f6chtest du die Z-Wave-Integration mit dem Z-Wave-Add-on einrichten?"
@@ -76,7 +82,7 @@
                 "title": "Add-on wird installiert"
             },
             "installation_type": {
-                "description": "In wenigen Schritten richten wir deinen Home Assistant Connect ZWA-2 ein. Home Assistant kann das empfohlene Z-Wave-Setup automatisch installieren und konfigurieren, oder du kannst es selbst anpassen.",
+                "description": "In wenigen Schritten richten wir deinen Adapter ein. Home Assistant kann das empfohlene Z-Wave-Setup automatisch installieren und konfigurieren, oder du kannst es selbst anpassen.",
                 "menu_options": {
                     "intent_custom": "Benutzerdefinierte Installation",
                     "intent_recommended": "Empfohlene Installation"
@@ -84,12 +90,8 @@
                 "title": "Z-Wave einrichten"
             },
             "instruct_unplug": {
-                "description": "Sicherung gespeichert unter \u201e{file_path}\u201c \n \nDein alter Controller wurde zur\u00fcckgesetzt. Wenn du die Hardware nicht mehr ben\u00f6tigst, kannst du sie jetzt trennen. \n \nBitte stelle sicher, dass dein neuer Controller angeschlossen ist, bevor du fortf\u00e4hrst.",
-                "title": "Trenne deinen alten Controller"
-            },
-            "intent_migrate": {
-                "description": "Bevor du deinen neuen Controller einrichtest, muss dein alter Controller zur\u00fcckgesetzt werden. Zuerst wird eine Sicherung durchgef\u00fchrt. \n \nM\u00f6chtest du fortfahren?",
-                "title": "Zu einem neuen Controller migrieren"
+                "description": "Backup gespeichert unter \u201e{file_path}\u201c \n \nDein alter Adapter wurde nicht zur\u00fcckgesetzt. Du solltest ihn jetzt ausstecken, um St\u00f6rungen des neuen Adapters zu vermeiden. \n \nBitte stelle sicher, dass dein neuer Adapter eingesteckt ist, bevor du fortf\u00e4hrst.",
+                "title": "Trenne deinen alten Adapter"
             },
             "manual": {
                 "data": {
@@ -101,6 +103,12 @@
                     "url": "URL"
                 }
             },
+            "network_type": {
+                "data": {
+                    "network_type": "Ist dein Netzwerk neu oder bereits vorhanden?"
+                },
+                "title": "Z-Wave-Netzwerk"
+            },
             "on_supervisor": {
                 "data": {
                     "use_addon": "Das Z-Wave Supervisor-Add-on verwenden"
@@ -116,15 +124,15 @@
                 "title": "Verbindungstyp ausw\u00e4hlen"
             },
             "reconfigure": {
-                "description": "Migrierst du zu einem neuen Controller oder konfigurierst du den aktuellen Controller neu?",
+                "description": "Migrierst du zu einem neuen Adapter oder konfigurierst du den aktuellen Adapter neu?",
                 "menu_options": {
-                    "intent_migrate": "Zu einem neuen Controller migrieren",
-                    "intent_reconfigure": "Den aktuellen Controller neu konfigurieren"
+                    "intent_migrate": "Zu einem neuen Adapter migrieren",
+                    "intent_reconfigure": "Den aktuellen Adapter neu konfigurieren"
                 },
                 "title": "Migrieren oder neu konfigurieren"
             },
             "restore_failed": {
-                "description": "Dein Z-Wave-Netzwerk konnte nicht auf dem neuen Controller wiederhergestellt werden. Das bedeutet, dass deine Z-Wave-Ger\u00e4te nicht mit Home Assistant verbunden sind. \n \nDie Sicherung wird unter \u201e{file_path}\u201c gespeichert.\n\n'<'a href=\"{file_url}\" download=\"{file_name}\"'>'Backup-Datei herunterladen'<'/a'>'",
+                "description": "Dein Z-Wave-Netzwerk konnte nicht auf dem neuen Adapter wiederhergestellt werden. Das bedeutet, dass deine Z-Wave-Ger\u00e4te nicht mit Home Assistant verbunden sind. \n \nDas Backup wurde unter \u201e{file_path}\u201c gespeichert.\n\n'<'a href=\"{file_url}\" download=\"{file_name}\"'>'Backup-Datei herunterladen'<'/a'>'",
                 "submit": "Erneut versuchen",
                 "title": "Wiederherstellung fehlgeschlagen"
             },
@@ -281,12 +289,20 @@
             "fix_flow": {
                 "step": {
                     "confirm": {
-                        "description": "Ein Z-Wave-Controller des Modells {controller_model} mit einer anderen ID ({new_unique_id}) als der zuvor angeschlossene Controller ({old_unique_id}) wurde mit dem Konfigurationseintrag {config_entry_title} verbunden.\n\nDie Gr\u00fcnde f\u00fcr eine andere Controller-ID k\u00f6nnten sein:\n\n1. Der Controller wurde mit einer Anwendung eines Drittanbieters auf die Werkseinstellungen zur\u00fcckgesetzt.\n2. Ein Backup des nicht fl\u00fcchtigen Speichers (NVM) der Steuerung wurde mit einer Anwendung eines Drittanbieters wiederhergestellt.\n3. Ein anderer Controller wurde mit diesem Konfigurationseintrag verbunden.\n\nWenn ein anderer Controller angeschlossen wurde, solltest du stattdessen einen neuen Konfigurationseintrag f\u00fcr den neuen Controller einrichten.\n\nWenn du sicher bist, dass der aktuelle Controller der richtige Controller ist, kannst du dies durch Dr\u00fccken von OK best\u00e4tigen, und der Konfigurationseintrag merkt sich die neue Controller-ID.",
-                        "title": "Ein unbekannter Controller wurde erkannt"
+                        "description": "Ein Z-Wave-Adapter des Modells {controller_model} wurde mit dem Konfigurationseintrag {config_entry_title} verbunden. Dieser Adapter hat eine andere ID ({new_unique_id}) als der zuvor angeschlossene Adapter ({old_unique_id}).\n\nGr\u00fcnde f\u00fcr eine andere Adapter-ID k\u00f6nnten sein:\n\n1. Der Adapter wurde mit einer Anwendung eines Drittanbieters auf die Werkseinstellungen zur\u00fcckgesetzt.\n2. Ein Backup des nichtfl\u00fcchtigen Speichers des Adapters wurde mit Hilfe einer Anwendung eines Drittanbieters in den Adapter zur\u00fcckgespielt.\n3. Ein anderer Adapter wurde mit diesem Konfigurationseintrag verbunden.\n\nWenn ein anderer Adapter verbunden wurde, solltest du stattdessen einen neuen Konfigurationseintrag f\u00fcr den neuen Adapter einrichten.\n\nWenn du dir sicher bist, dass der aktuelle Adapter der richtige Adapter ist, best\u00e4tige mit der Taste **OK**. Der Konfigurationseintrag wird sich die neue Adapter-ID merken.",
+                        "title": "Ein unbekannter Adapter wurde erkannt"
                     }
                 }
             },
-            "title": "Ein unbekannter Controller wurde erkannt"
+            "title": "Ein unbekannter Adapter wurde erkannt"
+        }
+    },
+    "selector": {
+        "network_type": {
+            "options": {
+                "existing": "Es ist bereits vorhanden",
+                "new": "Es ist neu"
+            }
         }
     },
     "services": {