homeassistant 2025.11.0__py3-none-any.whl → 2025.11.0b2__py3-none-any.whl

homeassistant/components/zha/translations/da.json

@@ -26,6 +26,9 @@
             "confirm": {
                 "description": "Vil du konfigurere {name}?"
             },
+            "confirm_hardware": {
+                "description": "Vil du konfigurere {name}?"
+            },
             "manual_pick_radio_type": {
                 "data": {
                     "radio_type": "Adaptertype"

homeassistant/components/zha/translations/de.json

@@ -16,11 +16,6 @@
             "invalid_backup_json": "Ung\u00fcltige Backup-JSON"
         },
         "flow_title": "{name}",
-        "progress": {
-            "form_new_network": "Aufbau eines neuen Zigbee-Netzwerks.\n\nDabei wird nach einem freien Netzwerkkanal gesucht, was eine Minute dauern kann.",
-            "maybe_reset_old_radio": "Zur\u00fccksetzen des alten Adapters.\n\nDein alter Adapter wurde gesichert und wird nun auf die Werkseinstellungen zur\u00fcckgesetzt.",
-            "restore_backup": "Wiederherstellen der Netzwerkeinstellungen auf dem neuen Adapter.\n\nDies dauert eine Minute."
-        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -81,15 +76,8 @@
             "confirm": {
                 "description": "M\u00f6chtest du {name} einrichten?"
             },
-            "confirm_ezsp_ieee_overwrite": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
-                },
-                "description": "Dein Backup hat eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte auch die IEEE-Adresse deines Adapters ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
-                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
-            },
-            "form_new_network": {
-                "title": "Bildung eines neuen Netzwerks"
+            "confirm_hardware": {
+                "description": "M\u00f6chtest du {name} einrichten?"
             },
             "manual_pick_radio_type": {
                 "data": {
@@ -112,27 +100,16 @@
                 "description": "ZHA konnte die Einstellungen der seriellen Schnittstelle f\u00fcr deinen Adapter nicht automatisch erkennen. Dies liegt normalerweise an der Firmware oder den Berechtigungen.\n\nWenn du Firmware mit nicht standardm\u00e4\u00dfigen Einstellungen verwendest, gib die Einstellungen f\u00fcr die serielle Schnittstelle ein.",
                 "title": "Einstellungen der seriellen Schnittstelle"
             },
-            "maybe_reset_old_radio": {
-                "title": "Alten Adapter zur\u00fccksetzen"
-            },
-            "plug_in_new_radio": {
-                "description": "Dein neuer Adapter unter `{device_path}` wurde nicht gefunden. Bitte schlie\u00dfe ihn an und dr\u00fccke OK, um fortzufahren.",
-                "title": "Neuer Adapter nicht gefunden"
-            },
-            "plug_in_old_radio": {
-                "description": "Dein alter Adapter unter `{device_path}` wurde nicht gefunden. Du kannst es erneut versuchen, nachdem du ihn wieder eingesteckt hast, oder das Zur\u00fccksetzen des alten Adapters \u00fcberspringen.\n\n**Achtung:** Wenn du das Zur\u00fccksetzen des alten Adapters \u00fcberspringst, stelle sicher, dass er dauerhaft getrennt bleibt. Ein sp\u00e4teres Wiedereinstecken kann zu Netzwerkproblemen f\u00fchren.",
-                "menu_option_descriptions": {
-                    "retry_old_radio": "Erneut versuchen, die Verbindung mit dem alten Adapter wiederherzustellen, um ihn im Rahmen der Migration zur\u00fcckzusetzen.",
-                    "skip_reset_old_radio": "Das Zur\u00fccksetzen des alten Adapters \u00fcberspringen und mit der Migration fortfahren."
-                },
-                "menu_options": {
-                    "retry_old_radio": "Wiederholen",
-                    "skip_reset_old_radio": "Zur\u00fccksetzen \u00fcberspringen"
+            "maybe_confirm_ezsp_restore": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
                 },
-                "title": "Alter Adapter nicht gefunden"
+                "description": "Dein Backup enth\u00e4lt eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte die IEEE-Adresse deines Adapters entsprechend ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
+                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
             },
-            "restore_backup": {
-                "title": "Wiederherstellung des Netzwerks auf neuem Adapter"
+            "maybe_reset_old_radio": {
+                "description": "Zuvor wurde ein Backup erstellt und dein alter Adapter wird im Rahmen der Migration zur\u00fcckgesetzt.",
+                "title": "Alten Adapter zur\u00fccksetzen"
             },
             "upload_manual_backup": {
                 "data": {
@@ -1892,11 +1869,6 @@
             "invalid_backup_json": "Ung\u00fcltige Backup-JSON"
         },
         "flow_title": "{name}",
-        "progress": {
-            "form_new_network": "Aufbau eines neuen Zigbee-Netzwerks.\n\nDabei wird nach einem freien Netzwerkkanal gesucht, was eine Minute dauern kann.",
-            "maybe_reset_old_radio": "Zur\u00fccksetzen des alten Adapters.\n\nDein alter Adapter wurde gesichert und wird nun auf die Werkseinstellungen zur\u00fcckgesetzt.",
-            "restore_backup": "Wiederherstellen der Netzwerkeinstellungen auf dem neuen Adapter.\n\nDies dauert eine Minute."
-        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1942,16 +1914,6 @@
                 "description": "W\u00e4hle den seriellen Anschluss f\u00fcr deinen Zigbee-Adapter",
                 "title": "Auswahl des seriellen Ports"
             },
-            "confirm_ezsp_ieee_overwrite": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
-                },
-                "description": "Dein Backup hat eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte auch die IEEE-Adresse deines Adapters ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
-                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
-            },
-            "form_new_network": {
-                "title": "Bildung eines neuen Netzwerks"
-            },
             "init": {
                 "description": "Es wird ein Backup durchgef\u00fchrt und ZHA wird gestoppt. M\u00f6chtest du fortfahren?",
                 "title": "ZHA rekonfigurieren"
@@ -1976,24 +1938,12 @@
                 "description": "ZHA konnte die Einstellungen der seriellen Schnittstelle f\u00fcr deinen Adapter nicht automatisch erkennen. Dies liegt normalerweise an der Firmware oder den Berechtigungen.\n\nWenn du Firmware mit nicht standardm\u00e4\u00dfigen Einstellungen verwendest, gib die Einstellungen f\u00fcr die serielle Schnittstelle ein.",
                 "title": "Einstellungen der seriellen Schnittstelle"
             },
-            "maybe_reset_old_radio": {
-                "title": "Alten Adapter zur\u00fccksetzen"
-            },
-            "plug_in_new_radio": {
-                "description": "Dein neuer Adapter unter `{device_path}` wurde nicht gefunden. Bitte schlie\u00dfe ihn an und dr\u00fccke OK, um fortzufahren.",
-                "title": "Neuer Adapter nicht gefunden"
-            },
-            "plug_in_old_radio": {
-                "description": "Dein alter Adapter unter `{device_path}` wurde nicht gefunden. Du kannst es erneut versuchen, nachdem du ihn wieder eingesteckt hast, oder das Zur\u00fccksetzen des alten Adapters \u00fcberspringen.\n\n**Achtung:** Wenn du das Zur\u00fccksetzen des alten Adapters \u00fcberspringst, stelle sicher, dass er dauerhaft getrennt bleibt. Ein sp\u00e4teres Wiedereinstecken kann zu Netzwerkproblemen f\u00fchren.",
-                "menu_option_descriptions": {
-                    "retry_old_radio": "Erneut versuchen, die Verbindung mit dem alten Adapter wiederherzustellen, um ihn im Rahmen der Migration zur\u00fcckzusetzen.",
-                    "skip_reset_old_radio": "Das Zur\u00fccksetzen des alten Adapters \u00fcberspringen und mit der Migration fortfahren."
-                },
-                "menu_options": {
-                    "retry_old_radio": "Wiederholen",
-                    "skip_reset_old_radio": "Zur\u00fccksetzen \u00fcberspringen"
+            "maybe_confirm_ezsp_restore": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Die IEEE-Adresse des Adapters dauerhaft ersetzen"
                 },
-                "title": "Alter Adapter nicht gefunden"
+                "description": "Dein Backup enth\u00e4lt eine andere IEEE-Adresse als dein Adapter. Damit dein Netzwerk ordnungsgem\u00e4\u00df funktioniert, sollte die IEEE-Adresse deines Adapters entsprechend ge\u00e4ndert werden.\n\nDies ist ein permanenter Vorgang.",
+                "title": "IEEE-Adresse des Adapters \u00fcberschreiben"
             },
             "prompt_migrate_or_reconfigure": {
                 "description": "Stellst du auf einen neuen Adapter um oder konfigurierst du den aktuellen Adapter neu?",
@@ -2007,9 +1957,6 @@
                 },
                 "title": "Migrieren oder neu konfigurieren"
             },
-            "restore_backup": {
-                "title": "Wiederherstellung des Netzwerks auf neuem Adapter"
-            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Datei hochladen"

homeassistant/components/zha/translations/el.json

@@ -42,6 +42,9 @@
             "confirm": {
                 "description": "\u0398\u03ad\u03bb\u03b5\u03c4\u03b5 \u03bd\u03b1 \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf {name};"
             },
+            "confirm_hardware": {
+                "description": "\u0398\u03ad\u03bb\u03b5\u03c4\u03b5 \u03bd\u03b1 \u03c1\u03c5\u03b8\u03bc\u03af\u03c3\u03b5\u03c4\u03b5 \u03c4\u03bf {name};"
+            },
             "manual_port_config": {
                 "data": {
                     "path": "\u0394\u03b9\u03b1\u03b4\u03c1\u03bf\u03bc\u03ae \u03c3\u03b5\u03b9\u03c1\u03b9\u03b1\u03ba\u03ae\u03c2 \u03c3\u03c5\u03c3\u03ba\u03b5\u03c5\u03ae\u03c2"

homeassistant/components/zha/translations/en-GB.json

@@ -16,11 +16,6 @@
             "invalid_backup_json": "Invalid backup JSON"
         },
         "flow_title": "{name}",
-        "progress": {
-            "form_new_network": "Forming a new Zigbee network.\n\nWe scan for a clear network channel as part of this process, this can take a minute.",
-            "maybe_reset_old_radio": "Resetting old adapter.\n\nYour old adapter has been backed up and is being factory reset.",
-            "restore_backup": "Restoring network settings to new adapter.\n\nThis will take a minute."
-        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -81,15 +76,8 @@
             "confirm": {
                 "description": "Do you want to set up {name}?"
             },
-            "confirm_ezsp_ieee_overwrite": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-                },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
-            },
-            "form_new_network": {
-                "title": "Forming new network"
+            "confirm_hardware": {
+                "description": "Do you want to set up {name}?"
             },
             "manual_pick_radio_type": {
                 "data": {
@@ -112,27 +100,16 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with non-standard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_reset_old_radio": {
-                "title": "Resetting old adapter"
-            },
-            "plug_in_new_radio": {
-                "description": "Your new adapter at `{device_path}` was not found.\nPlease plug it in and click Submit to continue.",
-                "title": "New adapter not found"
-            },
-            "plug_in_old_radio": {
-                "description": "Your old adapter at `{device_path}` was not found. You can retry after plugging it back in, or skip resetting the old adapter.\n\n**Warning:** If you skip resetting the old adapter, ensure it remains permanently disconnected. Plugging it back in later will cause network issues.",
-                "menu_option_descriptions": {
-                    "retry_old_radio": "Retry connecting to the old adapter to reset it as part of the migration.",
-                    "skip_reset_old_radio": "Skip resetting the old adapter and continue with the migration."
-                },
-                "menu_options": {
-                    "retry_old_radio": "Retry",
-                    "skip_reset_old_radio": "Skip reset"
+            "maybe_confirm_ezsp_restore": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
                 },
-                "title": "Old adapter not found"
+                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+                "title": "Overwrite adapter IEEE address"
             },
-            "restore_backup": {
-                "title": "Restoring network to new adapter"
+            "maybe_reset_old_radio": {
+                "description": "A backup was created earlier and your old adapter is being reset as part of the migration.",
+                "title": "Resetting old adapter"
             },
             "upload_manual_backup": {
                 "data": {
@@ -1892,11 +1869,6 @@
             "invalid_backup_json": "Invalid backup JSON"
         },
         "flow_title": "{name}",
-        "progress": {
-            "form_new_network": "Forming a new Zigbee network.\n\nWe scan for a clear network channel as part of this process, this can take a minute.",
-            "maybe_reset_old_radio": "Resetting old adapter.\n\nYour old adapter has been backed up and is being factory reset.",
-            "restore_backup": "Restoring network settings to new adapter.\n\nThis will take a minute."
-        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1942,16 +1914,6 @@
                 "description": "Select the serial port for your Zigbee adapter",
                 "title": "Select a serial port"
             },
-            "confirm_ezsp_ieee_overwrite": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-                },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
-            },
-            "form_new_network": {
-                "title": "Forming new network"
-            },
             "init": {
                 "description": "A backup will be performed and ZHA will be stopped. Do you wish to continue?",
                 "title": "Reconfigure ZHA"
@@ -1976,24 +1938,12 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with non-standard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_reset_old_radio": {
-                "title": "Resetting old adapter"
-            },
-            "plug_in_new_radio": {
-                "description": "Your new adapter at `{device_path}` was not found.\nPlease plug it in and click Submit to continue.",
-                "title": "New adapter not found"
-            },
-            "plug_in_old_radio": {
-                "description": "Your old adapter at `{device_path}` was not found. You can retry after plugging it back in, or skip resetting the old adapter.\n\n**Warning:** If you skip resetting the old adapter, ensure it remains permanently disconnected. Plugging it back in later will cause network issues.",
-                "menu_option_descriptions": {
-                    "retry_old_radio": "Retry connecting to the old adapter to reset it as part of the migration.",
-                    "skip_reset_old_radio": "Skip resetting the old adapter and continue with the migration."
-                },
-                "menu_options": {
-                    "retry_old_radio": "Retry",
-                    "skip_reset_old_radio": "Skip reset"
+            "maybe_confirm_ezsp_restore": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
                 },
-                "title": "Old adapter not found"
+                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+                "title": "Overwrite adapter IEEE address"
             },
             "prompt_migrate_or_reconfigure": {
                 "description": "Are you migrating to a new adapter or re-configuring the current adapter?",
@@ -2007,9 +1957,6 @@
                 },
                 "title": "Migrate or re-configure"
             },
-            "restore_backup": {
-                "title": "Restoring network to new adapter"
-            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Upload a file"

homeassistant/components/zha/translations/en.json

@@ -16,11 +16,6 @@
             "invalid_backup_json": "Invalid backup JSON"
         },
         "flow_title": "{name}",
-        "progress": {
-            "form_new_network": "Forming a new Zigbee network.\n\nWe scan for a clear network channel as part of this process, this can take a minute.",
-            "maybe_reset_old_radio": "Resetting old adapter.\n\nYour old adapter has been backed up and is being factory reset.",
-            "restore_backup": "Restoring network settings to new adapter.\n\nThis will take a minute."
-        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -81,15 +76,8 @@
             "confirm": {
                 "description": "Do you want to set up {name}?"
             },
-            "confirm_ezsp_ieee_overwrite": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-                },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
-            },
-            "form_new_network": {
-                "title": "Forming new network"
+            "confirm_hardware": {
+                "description": "Do you want to set up {name}?"
             },
             "manual_pick_radio_type": {
                 "data": {
@@ -112,27 +100,16 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with nonstandard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_reset_old_radio": {
-                "title": "Resetting old adapter"
-            },
-            "plug_in_new_radio": {
-                "description": "Your new adapter at `{device_path}` was not found.\nPlease plug it in and click Submit to continue.",
-                "title": "New adapter not found"
-            },
-            "plug_in_old_radio": {
-                "description": "Your old adapter at `{device_path}` was not found. You can retry after plugging it back in, or skip resetting the old adapter.\n\n**Warning:** If you skip resetting the old adapter, ensure it remains permanently disconnected. Plugging it back in later will cause network issues.",
-                "menu_option_descriptions": {
-                    "retry_old_radio": "Retry connecting to the old adapter to reset it as part of the migration.",
-                    "skip_reset_old_radio": "Skip resetting the old adapter and continue with the migration."
-                },
-                "menu_options": {
-                    "retry_old_radio": "Retry",
-                    "skip_reset_old_radio": "Skip reset"
+            "maybe_confirm_ezsp_restore": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
                 },
-                "title": "Old adapter not found"
+                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+                "title": "Overwrite adapter IEEE address"
             },
-            "restore_backup": {
-                "title": "Restoring network to new adapter"
+            "maybe_reset_old_radio": {
+                "description": "A backup was created earlier and your old adapter is being reset as part of the migration.",
+                "title": "Resetting old adapter"
             },
             "upload_manual_backup": {
                 "data": {
@@ -1892,11 +1869,6 @@
             "invalid_backup_json": "Invalid backup JSON"
         },
         "flow_title": "{name}",
-        "progress": {
-            "form_new_network": "Forming a new Zigbee network.\n\nWe scan for a clear network channel as part of this process, this can take a minute.",
-            "maybe_reset_old_radio": "Resetting old adapter.\n\nYour old adapter has been backed up and is being factory reset.",
-            "restore_backup": "Restoring network settings to new adapter.\n\nThis will take a minute."
-        },
         "step": {
             "choose_automatic_backup": {
                 "data": {
@@ -1942,16 +1914,6 @@
                 "description": "Select the serial port for your Zigbee adapter",
                 "title": "Select a serial port"
             },
-            "confirm_ezsp_ieee_overwrite": {
-                "data": {
-                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
-                },
-                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
-                "title": "Overwrite adapter IEEE address"
-            },
-            "form_new_network": {
-                "title": "Forming new network"
-            },
             "init": {
                 "description": "A backup will be performed and ZHA will be stopped. Do you wish to continue?",
                 "title": "Reconfigure ZHA"
@@ -1976,24 +1938,12 @@
                 "description": "ZHA was not able to automatically detect serial port settings for your adapter. This usually is an issue with the firmware or permissions.\n\nIf you are using firmware with nonstandard settings, enter the serial port settings",
                 "title": "Serial port settings"
             },
-            "maybe_reset_old_radio": {
-                "title": "Resetting old adapter"
-            },
-            "plug_in_new_radio": {
-                "description": "Your new adapter at `{device_path}` was not found.\nPlease plug it in and click Submit to continue.",
-                "title": "New adapter not found"
-            },
-            "plug_in_old_radio": {
-                "description": "Your old adapter at `{device_path}` was not found. You can retry after plugging it back in, or skip resetting the old adapter.\n\n**Warning:** If you skip resetting the old adapter, ensure it remains permanently disconnected. Plugging it back in later will cause network issues.",
-                "menu_option_descriptions": {
-                    "retry_old_radio": "Retry connecting to the old adapter to reset it as part of the migration.",
-                    "skip_reset_old_radio": "Skip resetting the old adapter and continue with the migration."
-                },
-                "menu_options": {
-                    "retry_old_radio": "Retry",
-                    "skip_reset_old_radio": "Skip reset"
+            "maybe_confirm_ezsp_restore": {
+                "data": {
+                    "overwrite_coordinator_ieee": "Permanently replace the adapter IEEE address"
                 },
-                "title": "Old adapter not found"
+                "description": "Your backup has a different IEEE address than your adapter. For your network to function properly, the IEEE address of your adapter should also be changed.\n\nThis is a permanent operation.",
+                "title": "Overwrite adapter IEEE address"
             },
             "prompt_migrate_or_reconfigure": {
                 "description": "Are you migrating to a new adapter or re-configuring the current adapter?",
@@ -2007,9 +1957,6 @@
                 },
                 "title": "Migrate or re-configure"
             },
-            "restore_backup": {
-                "title": "Restoring network to new adapter"
-            },
             "upload_manual_backup": {
                 "data": {
                     "uploaded_backup_file": "Upload a file"