gammasimtools 0.6.1__py3-none-any.whl → 0.8.2__py3-none-any.whl

simtools/schemas/model_parameters/teltrig_min_sigsum.schema.yml

@@ -0,0 +1,41 @@
+%YAML 1.2
+---
+title: Schema for teltrig_min_sigsum model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: teltrig_min_sigsum
+description: |-
+  Minimum signal sum at sector trigger over threshold.
+  Note that both the minimum time over threshold and the minimum signal
+  sum have to be satisfied before a trigger is obtained. Normally, either
+  of these values being non-zero should be sufficient.
+short_description: Minimum signal sum at sector trigger over threshold.
+data:
+  - type: double
+    unit: mV * ns
+    default: 7.8
+    allowed_range:
+      min: 0.0
+      max: 1000.0
+    condition: default_trigger==Majority
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateTriggerPerformance
+source:
+  - Observation execution
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/teltrig_min_time.schema.yml

@@ -0,0 +1,36 @@
+%YAML 1.2
+---
+title: Schema for teltrig_min_time model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: teltrig_min_time
+description: Minimum time of sector trigger over threshold.
+data:
+  - type: double
+    unit: ns
+    default: 1.5
+    allowed_range:
+      min: 0.0
+      max: 10.0
+    condition: default_trigger==Majority
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateTriggerPerformance
+source:
+  - Observation execution
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/transit_time_calib_error.schema.yml

@@ -0,0 +1,36 @@
+%YAML 1.2
+---
+title: Schema for transit_time_calib_error model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: transit_time_calib_error
+description: |-
+  Accuracy with which the actual signal delay due to transit
+  time variation and corresponding compensation can be determined.
+data:
+  - type: double
+    unit: ns
+    default: 0.
+    allowed_range:
+      min: 0.0
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateCameraTimeResponse
+source:
+  - Initial instrument setup
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/transit_time_compensate_error.schema.yml

@@ -0,0 +1,37 @@
+%YAML 1.2
+---
+title: Schema for transit_time_compensate_error model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: transit_time_compensate_error
+description: |-
+  Additional error (r.m.s.) in how well the number of steps for
+  transit time compensation can be determined before the
+  compensation is applied.
+data:
+  - type: double
+    unit: ns
+    default: 0.0
+    allowed_range:
+      min: 0.0
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateCameraTimeResponse
+source:
+  - Initial instrument setup
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/transit_time_compensate_step.schema.yml

@@ -0,0 +1,38 @@
+%YAML 1.2
+---
+title: Schema for transit_time_compensate_step model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: transit_time_compensate_step
+description: |-
+  If signal delays can be compensated independent of the sampling,
+  this is the time step in which this compensation can be done.
+  A value of zero means no compensation is applied.
+  The same compensation is applied to all channels.
+data:
+  - type: double
+    unit: ns
+    default: 0.0
+    allowed_range:
+      min: 0.0
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateCameraTimeResponse
+source:
+  - Initial instrument setup
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/transit_time_error.schema.yml

@@ -0,0 +1,45 @@
+%YAML 1.2
+---
+title: Schema for transit_time_error model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: transit_time_error
+short_description: Errors (r.m.s.) in transit time, not related to high voltage.
+description: |-
+  Errors (r.m.s.) in transit time, additionally to and not related to
+  those depending on applied high voltage.
+  If this parameter is set to $-1$, the readout interval is assumed to be
+  adjusted, pixel by pixel, such that resulting transit time differences
+  are within one readout time slice. For correcting transit times by
+  electronic means with time steps independent of the sampling frequency the
+  par:transit-time-compensate-step and par:transit-time-compensate-error
+  can be used.  The resulting transit time difference, after application of
+  compensation if used, is reported in the calibration data block, but only
+  up to a random accuracy defined by par:transit-time-calib-error.
+data:
+  - type: double
+    unit: ns
+    default: 0.
+    allowed_range:
+      min: -1.0
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateCameraTimeResponse
+source:
+  - Initial instrument setup
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/transit_time_jitter.schema.yml

@@ -0,0 +1,36 @@
+%YAML 1.2
+---
+title: Schema for transit_time_jitter model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: transit_time_jitter
+description: |-
+  Time jitter (Gaussian r.m.s. spread of random fluctuations) of individual
+  photo-electrons.
+data:
+  - type: double
+    unit: ns
+    default: 0.75
+    allowed_range:
+      min: 0.0
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateCameraTimeResponse
+source:
+  - Initial instrument setup
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/trigger_current_limit.schema.yml

@@ -0,0 +1,32 @@
+%YAML 1.2
+---
+title: Schema for trigger_current_limit model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: trigger_current_limit
+description: Pixels above this limit are excluded from the trigger.
+data:
+  - type: double
+    unit: uA
+    default: 20.0
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateTriggerPerformance
+source:
+  - Observation execution
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/trigger_delay_compensation.schema.yml

@@ -0,0 +1,53 @@
+%YAML 1.2
+---
+title: Schema for trigger_delay_compensation model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: trigger_delay_compensation
+developer_note: Always zero for all cameras. Not clear what parameter 4 is.
+description: |-
+  The majority trigger, analog sum trigger, and digital sum trigger
+  decisions result in different times of the trigger decision. To
+  compensate for this, a delay is applied for array-level coincidences
+  of triggers from telescopes with different trigger types.
+short_description: |-
+  The delay applied to the trigger output to compensate for the different
+  execution times of each trigger algorithm.
+data:
+  - type: double
+    description: Delay applied for majority trigger.
+    unit: ns
+    default: 0.0
+  - type: double
+    description: Delay applied for analog sum trigger.
+    unit: ns
+    default: 0.0
+  - type: double
+    description: Delay applied for digital sum trigger.
+    unit: ns
+    default: 0.0
+  - type: double
+    description: Delay (TODO this value is unclear)
+    unit: ns
+    default: 0.0
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateTriggerPerformance
+source:
+  - Observation execution
+simulation_software:
+  - name: sim_telarray

simtools/schemas/model_parameters/trigger_pixels.schema.yml

@@ -0,0 +1,40 @@
+%YAML 1.2
+---
+title: Schema for trigger_pixels model parameter
+version: 0.1.0
+meta_schema: simpipe-schema
+meta_schema_url: https://raw.githubusercontent.com/gammasim/simtools/main/src/simtools/schemas/model_parameter_and_data_schema.metaschema.yml
+meta_schema_version: 0.1.0
+name: trigger_pixels
+description: |-
+  Number of pixels required for single telescope trigger.
+  With flexible camera definitions, this is the default number for the
+  multiplicity required per trigger group. Any definition of trigger groups
+  (e.g., parameter DigitalSumTrigger) overwrites the setting of
+  trigger_pixels.
+short_description: Number of pixels required for single telescope trigger.
+data:
+  - type: uint
+    unit: dimensionless
+    default: 4
+    allowed_range:
+      min: 1
+instrument:
+  class: Camera
+  type:
+    - LSTN
+    - LSTS
+    - MSTN
+    - MSTS
+    - SSTS
+    - SCTS
+activity:
+  setting:
+    - SetParameterFromExternal
+  validation:
+    - ValidateParameterByExpert
+    - ValidateTriggerPerformance
+source:
+  - Observation execution
+simulation_software:
+  - name: sim_telarray