fiqus 2025.2.0__py3-none-any.whl → 2025.10.0__py3-none-any.whl

fiqus/data/DataModelCommon.py

@@ -0,0 +1,439 @@
+from pydantic import BaseModel, Field
+
+from typing import List, Union, Optional, Literal
+
+
+############################
+# Circuit
+class Circuit_Class(BaseModel):
+    """
+        Level 1: Class for the circuit parameters
+    """
+    field_circuit: Optional[bool] = Field(
+        default = False,
+        description = "Allows to use Field-Circuit Coupling equations in the model.")
+    R_circuit: Optional[float] = None             # R_circuit
+    L_circuit: Optional[float] = None             # Lcir (SIGMA)
+    R_parallel: Optional[float] = None
+
+ 
+############################
+# Power Supply (aka Power Converter)
+class PowerSupplyClass(BaseModel):
+    """
+        Level 1: Class for the power supply (aka power converter)
+    """
+    I_initial: Optional[float] = Field(
+        default=None,
+        description="Initial current in the magnet. Propagated differently in various tools and obsolete # I00 (LEDET), I_0 (SIGMA), I0 (BBQ)")
+    t_off: Optional[float] = Field(
+        default=None,
+        description="Time of switching off the switch next to current controlled source. t_PC (LEDET)")
+    t_control_LUT: List[float] = Field(
+        default=[],
+        description="List of time values [s] for linear piece wise time function of current controlled source. t_PC_LUT (LEDET)")
+    I_control_LUT: List[float] = Field(
+        default=[],
+        description="List of current values [A] for linear piece wise time function of current controlled source. I_PC_LUT (LEDET)")
+    R_crowbar: Optional[float] = Field(
+        default=0,
+        description="Crowbar resistance in forward direction [Ohm]. Rcrow (SIGMA), RCrowbar (ProteCCT)")
+    L_crowbar: Optional[float] = Field(
+        default=0,
+        description="Crowbar inductance in forward direction [H].")
+    Ud_crowbar: Optional[float] = Field(
+        default=0,
+        description="Crowbar diode voltage in forward direction [V].")
+    R_c_r: Optional[float] = Field(
+        default=0,
+        description="Crowbar resistance in reverse direction [Ohm].")
+    L_c_r: Optional[float] = Field(
+        default=0,
+        description="Crowbar inductance in reverse direction [H].")
+    Ud_c_r: Optional[float] = Field(
+        default=0,
+        description="Crowbar diode voltage in reverse direction [V].")
+    R_1: Optional[float] = Field(
+        default=0,
+        description="Resistance R1 [Ohm].")
+    L_1: Optional[float] = Field(
+        default=0,
+        description="Inductance L1 [H].")
+    R_2: Optional[float] = Field(
+        default=0,
+        description="Resistance R2 [Ohm].")
+    L_2: Optional[float] = Field(
+        default=0,
+        description="Inductance L2 [H].")
+    C: Optional[float] = Field(
+        default=0,
+        description="Capacitance C [F].")
+    R_3: Optional[float] = Field(
+        default=0,
+        description="Resistance R3 [Ohm].")
+    L_3: Optional[float] = Field(
+        default=0,
+        description="Inductance L3 [H].")
+
+############################
+# Quench Protection
+class EnergyExtraction(BaseModel):
+    """
+        Level 2: Class for the energy extraction parameters
+    """
+    t_trigger: Optional[float] = Field(
+        default=99999.0,
+        description="Trigger time on the positive lead [s]. tEE (LEDET), tSwitchDelay (ProteCCT)")
+    R_EE: Optional[float] = Field(
+        default=0,
+        description="Energy extraction resistance on the positive lead [Ohm]. R_EE_triggered (ProteCCT)")
+    power_R_EE: Optional[float] = Field(
+        default=0.0,
+        description="Varistor power component, R(I) = R_EE*abs(I)^power_R_EE on the positive lead [-]. RDumpPower (ProteCCT)")
+    L: Optional[float] = Field(
+        default=0,
+        description="Inductance in series with resistor on the positive lead [H].")
+    C: Optional[float] = Field(
+        default=0,
+        description="Snubber capacitance in parallel to the EE switch on the positive lead [F].")
+    L_c: Optional[float] = Field(
+        default=0,
+        description="Inductance in the snubber capacitance branch in parallel to the EE switch on the positive lead [H].")
+    R_c: Optional[float] = Field(
+        default=0,
+        description="Resistance in the snubber capacitance branch in parallel to the EE switch on the positive lead [Ohm].")
+    Ud_snubber: Optional[float] = Field(
+        default=0,
+        description="Forward voltage of diode in the snubber capacitance branch in parallel to the EE switch on the positive lead [V].")
+    L_s: Optional[float] = Field(
+        default=0,
+        description="Inductance in the EE switch branch on the positive lead [H].")
+    R_s: Optional[float] = Field(
+        default=0,
+        description="Resistance in the EE switch branch on the positive lead [Ohm].")
+    Ud_switch: Optional[float] = Field(
+        default=0,
+        description="Forward voltage of diode in the EE switch branch on the positive lead [V].")
+
+    t_trigger_n: Optional[float] = Field(
+        default=99999.0,
+        description="Trigger time on the negative lead [s]. tEE (LEDET), tSwitchDelay (ProteCCT)")
+    R_EE_n: Optional[float] = Field(
+        default=0,
+        description="Energy extraction resistance on the negative lead [Ohm]. R_EE_triggered (ProteCCT)")
+    power_R_EE_n: Optional[float] = Field(
+        default=0.0,
+        description="Varistor power component, R(I) = R_EE*abs(I)^power_R_EE on the negative lead [-]. RDumpPower (ProteCCT)")
+    L_n: Optional[float] = Field(
+        default=0,
+        description="Inductance in series with resistor on the negative lead [H].")
+    C_n: Optional[float] = Field(
+        default=0,
+        description="Snubber capacitance in parallel to the EE switch on the negative lead [F].")
+    L_c_n: Optional[float] = Field(
+        default=0,
+        description="Inductance in the snubber capacitance branch in parallel to the EE switch on the negative lead [H].")
+    R_c_n: Optional[float] = Field(
+        default=0,
+        description="Resistance in the snubber capacitance branch in parallel to the EE switch on the negative lead [Ohm].")
+    Ud_snubber_n: Optional[float] = Field(
+        default=0,
+        description="Forward voltage of diode in the snubber capacitance branch in parallel to the EE switch on the negative lead [V].")
+    L_s_n: Optional[float] = Field(
+        default=0,
+        description="Inductance in the EE switch branch on the negative lead [H].")
+    R_s_n: Optional[float] = Field(
+        default=0,
+        description="Resistance in the EE switch branch on the negative lead [Ohm].")
+    Ud_switch_n: Optional[float] = Field(
+        default=0,
+        description="Forward voltage of diode in the EE switch branch on the negative lead [V].")
+
+
+class QuenchHeater(BaseModel):
+    """
+        Level 2: Class for the quench heater parameters
+    """
+    N_strips: Optional[int] = Field(
+        default=None,
+        description="Number of quench heater traces (typically 2 traces make one pad)")
+    t_trigger: List[float] = Field(
+        default=[],
+        description="Trigger times list of of quench heaters [s]")
+    U0: List[float] = Field(
+        default=[],
+        description="Initial charging voltages list of capacitor for the trance (not full pad!) [V]")
+    C: List[float] = Field(
+        default=[],
+        description="Capacitances list of quench heater power supply for the trance (not full pad!) [H]")
+    R_warm: List[float] = Field(
+        default=[],
+        description="Internal resistances list of quench heater power supply and/or additional resistance added to limit the heater current for the trance (not full pad!) [Ohm]")
+    w: List[float] = Field(
+        default=[],
+        description="Widths list of quench heater trance stainless steel part [m]")
+    h: List[float] = Field(
+        default=[],
+        description="Thickness list of quench heater trance stainless steel part [m]")
+    h_ins: Union[List[float], List[List[float]]] = Field(
+        default=[],
+        description="Thickness list of quench heater insulation between the stainless steel part and conductor insulation [m]"
+                    "This could be a list of list to specify multiple material thicknesses")
+    type_ins: Union[List[str], List[List[str]]] = Field(
+        default=[],
+        description="Material names list of quench heater insulation between the stainless steel part and conductor insulation [-]"
+                    "This could be a list of list to specify multiple material names")
+    h_ground_ins: Union[List[float], List[List[float]]] = Field(
+        default=[],
+        description="Material names list of quench heater insulation between the stainless steel part and helium bath [-]"
+                    "This could be a list of list to specify multiple material thicknesses")
+    type_ground_ins: Union[List[str], List[List[str]]] = Field(
+        default=[],
+        description="Material names list of quench heater insulation between the stainless steel part and helium bath [-]"
+                    "This could be a list of list to specify multiple material names")
+    l: List[float] = Field(
+        default=[],
+        description="Lengths list of quench heaters [m]. Typically equal to magnet length.")
+    l_copper: List[float] = Field(
+        default=[],
+        description="Lengths list of copper laminations of quench heaters [m].")
+    l_stainless_steel: List[float] = Field(
+        default=[],
+        description="Lengths list of stainless steel only sections of quench heaters [m].")
+    f_cover: List[float] = Field(
+        default=[],
+        description="List of fraction of stainless steel cover. This is l_stainless_steel/(l_stainless_steel+l_copper). Marked as obsolete, but still specified in some models [-].")
+    ids: List[int] = Field(
+        default=[],
+        description="List of heater numbers (1 based) equal to the length of turns that are covered by (i.e. thermally connected to) quench heaters.")
+    turns: List[int] = Field(
+        default=[],
+        description="List of turn numbers (1 based) that are covered by (i.e. thermally connected to) quench heaters.")
+    turns_sides: List[str] = Field(
+        default=[],
+        description="List of letters specifying side of turn where quench heater is placed. Only used in FiQuS Multipole module."
+                    "Possible sides are: 'o' - outer, 'i' - inner, 'l' - lower angle, 'h' - higher angle.")
+    quench_propagation: Optional[Literal['2Dx1D','full']] = Field(
+        default = "full",
+        description = 'Enables to have a variable length for the quench heater, different from the full magnet length.')
+    quench_prop_model: Optional[Literal['Wilson','Ts']] = Field(
+        default = "Ts",
+        description = 'Selects the model used for the material properties of the quench propagation. "Wilson" uses a scaled cv and Ts uses the cv at Ts.')
+    NZPV_multiplier: Optional[float] = Field(
+        default = 1.0,
+        description = 'Factor that multiplies the Normal Zone Propagation Velocity')
+    L_QH_offset: Optional[List[float]] = Field(
+        default = [],
+        description= 'Offset of the quench heater strip from the referrence point located  at the middle of the magnet length. Positive values move the quench heater towards higher z values (move quench heater strip towards the front ofthe magnet).')
+
+class CLIQ_Class(BaseModel):
+    """
+        Level 2: Class for the CLIQ parameters
+    """
+    t_trigger: Optional[float] = Field(
+        default=99999.0,
+        description="Trigger time of CLIQ unit [s].")
+    current_direction: List[int] = Field(
+        default=[],
+        description="Polarity of current in groups specified as a list with length equal to the number of groups [-].")
+    sym_factor: Optional[float] = Field(
+        default=None,
+        description="Obsolete.")
+    N_units: Optional[int] = Field(
+        default=None,
+        description="Obsolete.")
+    U0: Optional[float] = Field(
+        default=0,
+        description="Initial charging voltage of CLIQ unit [V].")
+    C: Optional[float] = Field(
+        default=0,
+        description="Capacitance of CLIQ unit [F].")
+    R: Optional[float] = Field(
+        default=0,
+        description="Resistance of CLIQ unit [Ohm].")
+    L: Optional[float] = Field(
+        default=0,
+        description="Inductance of CLIQ unit [H].")
+    I0: Optional[float] = Field(
+        default=None,
+        description="Obsolete.")
+
+
+class ESC_Class(BaseModel):
+    """
+        Level 2: Class for the ESC parameters
+    """
+    t_trigger: List[float] = Field(
+        default=[],
+        description="Trigger time of ESC units [s] given as a list with length corresponding to the number of ESC units.")
+    U0: List[float] = Field(
+        default=[],
+        description="Initial charging voltage of ESC units [V] given as a list with length corresponding to the number of ESC units."
+                    "The unit is grounded in the middle, so the voltage to ground is half of this value")
+    C: List[float] = Field(
+        default=[],
+        description="Capacitance of ESC units [F] given as a list with length corresponding to the number of ESC units."
+                    "The unit is grounded in the middle, with two capacitors in series with value of 2C")
+    L: List[float] = Field(
+        default=[],
+        description="Parasitic inductance of ESC units [H] given as a list with length corresponding to the number of ESC units."
+                    "The unit is grounded in the middle, with two capacitors in series with value of 2C")
+    R_unit: List[float] = Field(
+        default=[],
+        description="Internal resistance of ESC units [Ohm] given as a list with length corresponding to the number of ESC units.")
+    R_leads: List[float] = Field(
+        default=[],
+        description="Resistance of leads from ESC coil to ESC diode connections [Ohm] given as a list with length corresponding to the number of ESC units.")
+    Ud_Diode: List[float] = Field(
+        default=[],
+        description="Forward diodes voltage across ESC coils [V] given as a list with length corresponding to the number of ESC units.")
+    L_Diode: List[float] = Field(
+        default=[],
+        description="Inductance in series with diodes across ESC coils [V] given as a list with length corresponding to the number of ESC units.")
+
+
+class FQPCs_Class(BaseModel):
+    """
+        Level 2: Class for the FQPLs parameters for protection
+    """
+    enabled: Optional[List[bool]] = Field(
+        default=None,
+        description="List of booleans specifying which FQPC is enabled.")
+    names: Optional[List[str]] = Field(
+        default=None,
+        description="List of names to use in gmsh and getdp. Any unique ASCII strings would work")
+    fndpls: Optional[List[int]] = Field(
+        default=None,
+        description="List of FQPC number of divisions per length at geometry level [-]")
+    fwws: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC wire widths (assuming rectangular). For theta = 0 this is x dimension. Works at geometry level [-]")
+    fwhs: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC wire heights (assuming rectangular). For theta = 0 this is y dimension. Works at geometry level [-]")
+    r_ins: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC inner diameter of (e.g. for CCT magnet). For theta = 0 this is x dimension. Works at geometry level [-]")
+    r_bs: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC radiuses for bending the fqpl by 180 degrees at the end of the magnet to go backward. Works at geometry level [-]")
+    n_sbs: Optional[List[int]] = Field(
+        default=None,
+        description="List of FQPC number of 'bending segments' for the 180 degrees turn. Works at geometry level [-]")
+    thetas: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC rotation in deg from x+ axis towards y+ axis about z axis. Works at geometry level [-]")
+    z_starts: Optional[List[str]] = Field(
+        default=None,
+        description="List of z coordinates for the air boundary to start at. These are string with either: z_min or z_max key from the Air region. Works at geometry level [-]")
+    z_ends: Optional[List[float]] = Field(
+        default=None,
+        description="List of z coordinates for the air boundary to end at. These are string with either: z_min or z_max key from the Air region. Works at geometry level [-]")
+    currents: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC currents for a magnetostatic solution. Works at solve level [-]")
+    sigmas: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC electrical conductivity for a magnetostatic solution. Works at solve level [-]")
+    mu_rs: Optional[List[float]] = Field(
+        default=None,
+        description="List of FQPC magnetic permeability  for a magnetostatic solution. Works at solve level [-]")
+    th_conns_def: Optional[List[List]] = Field(
+        default=None,
+        description="List of lists specifying thermal connections for LEDET to connect the FQPCs to the other turns of the magnet")
+
+class SourceSine(BaseModel):
+    """
+    Level 3: Class for Sine source parameters for E-CLIQ
+    """
+    frequency: Optional[float] = Field(default=None, description="Frequency of the sine source (Hz).")
+    current_amplitude: Optional[float] = Field(default=None, description="Amplitude of the sine current (A).")
+    number_of_periods: Optional[float] = Field(default=None, description="Amplitude of the sine current (A).")
+
+class SourcePiecewise(BaseModel):
+    """
+    Level 3 Class for piecewise (linear) source parameters for E-CLIQ
+    """
+    csv_file: Optional[str] = Field(default=None, description="File name for the from_file source type defining the time evolution of current. Multipliers are used for each of them. The file should contain two columns: 'time' (s) and 'current' (A), with these headers. If this field is set, times and currents are ignored.")
+    times: Optional[List[float]] = Field(default=None, description="Time instants (s) defining the piecewise linear sources. Used only if source_csv_file is not set. Can be scaled by time_multiplier.")
+    currents: Optional[List[float]] = Field(default=None, description="E-CLIQ coil currents relative to current_multiplier at the time instants 'times'. Used only if source_csv_file is not set.")
+    time_multiplier: Optional[float] = Field(default=None, description="Multiplier for the time values in times (scales the time values). Also used for the time values in the source_csv_file.")
+    current_multiplier: Optional[float] = Field(default=None, description="Multiplier for the E-CLIQ coil currents in currents. Also used for the values in the source_csv_file.")
+
+class E_CLIQ_Class(BaseModel):
+    """
+        Level 2: Class for the E-CLIQ parameters for protection
+    """
+    t_trigger: Optional[List[float]] = Field(
+        default=[],
+        description="Trigger time of E-CLIQ current sources [s] given as a list with length corresponding to the number of E-CLIQ units.")
+    R_leads: Optional[List[float]] = Field(
+        default=None,
+        description="List of E-CLIQ unit lead resistances [Ohm]. List length corresponding to the number of E-CLIQ units.")
+    L_leads: Optional[List[float]] = Field(
+        default=None,
+        description="List of E-CLIQ unit lead inductances [H]. List length corresponding to the number of E-CLIQ units.")
+    source_type: Literal['sine', 'piecewise', None] = Field(
+        default=None,
+        description="Time evolution of applied current. Supported options are: sine, piecewise.")
+    sine: SourceSine = Field(
+        default=SourceSine(),
+        description="Definition of sine current source parameters.")
+    piecewise: SourcePiecewise = Field(
+        default=SourcePiecewise(),
+        description="Definition of piecewise current source parameters.")
+    quench_propagation: Optional[Literal['2Dx1D','full']] = Field(
+        default = "full",
+        description = 'Enables to have a variable length for the ecliq implementation, different from the full magnet length. It only affects the Thermal Behaviour of the model.')
+    quench_prop_model: Optional[Literal['Wilson','Ts']] = Field(
+        default = "Ts",
+        description = 'Selects the model used for the material properties of the quench propagation. "Wilson" uses a scaled cv with a function of T_bath and Ts and Ts uses the cv at Ts.')
+    NZPV_multiplier: Optional[float] = Field(
+        default = 1.0,
+        description = 'Factor that multiplies the Normal Zone Propagation Velocity')
+    N_units: Optional[List[int]] = Field(
+        default = [],
+        description= 'Number of E-CLIQ units along the magnet length per ecliq coil. It must be an odd number for symmetry reasons.')
+    h_ecliq: Optional[List[float]] = Field(
+        default = [],
+        description = 'Spacing between the ecliq coils along the magnet length (m).')
+    l_ecliq: Optional[List[float]] = Field(
+        default = [],
+        description = 'length of the ecliq coils along the magnet length (m).')
+    L_ecliq_offset: Optional[List[float]] = Field(
+        default = [],
+        description = 'Offset of the quench heater strip from the referrence point located  at the middle of the magnet length. Positive values move the quench heater towards higher z values (move quench heater strip towards the front ofthe magnet).')
+
+class QuenchDetection(BaseModel):
+    """
+    Level 2: Class for FiQuS
+    """
+
+    voltage_thresholds: Optional[List[float]] = Field(
+        default=None,
+        title="List of quench detection voltage thresholds",
+        description="Voltage thresholds for quench detection. The quench detection will be triggered when the voltage exceeds these thresholds continuously for a time larger than the discrimination time.",
+    )
+
+    discrimination_times: Optional[List[float]] = Field(
+        default=None,
+        title="List of quench detection discrimination times",
+        description="Discrimination times for quench detection. The quench detection will be triggered when the voltage exceeds the thresholds continuously for a time larger than these discrimination times.",
+    )
+
+    voltage_tap_pairs: Optional[List[List[int]]] = Field(
+        default=None,
+        title="List of quench detection voltage tap pairs",
+        description="Voltage tap pairs for quench detection. The voltage difference between these pairs will be used for quench detection.",
+    )
+
+class QuenchProtection(BaseModel):
+    """
+        Level 1: Class for quench protection
+    """
+    Energy_Extraction: EnergyExtraction = EnergyExtraction()
+    Quench_Heaters: QuenchHeater = QuenchHeater()
+    CLIQ: CLIQ_Class = CLIQ_Class()
+    ESC: ESC_Class = ESC_Class()
+    FQPCs: FQPCs_Class = FQPCs_Class()
+    E_CLIQ: E_CLIQ_Class = E_CLIQ_Class()

fiqus/data/DataMultipole.py

@@ -249,16 +249,3 @@ class MultipoleRegionCoordinate(BaseModel):
     neighbouring_nodes: NeighbourNode = NeighbourNode()
 
 
-# if __name__ == "__main__":
-#     write = True
-#     read = False
-#
-#     def read_regions(regions_file_name):
-#         with open(regions_file_name, 'r') as stream:
-#             yaml_str = ruamel.yaml.safe_load(stream)
-#         return MultipoleData(**yaml_str)
-#
-#     if write:
-#         model = MultipoleData()
-#         with open('FiQuS_data.yaml', 'w') as yaml_file:
-#             ruamel.yaml.dump(model.dict(), yaml_file, default_flow_style=False)

fiqus/data/DataRoxieParser.py

@@ -413,3 +413,10 @@ class RoxieData(BaseModel):
     iron: Iron = Iron()
     coil: CoilData = CoilData()
     wedges: Dict[int, Wedge] = {}
+
+class FiQuSGeometry(BaseModel):
+    """
+    Class for Roxie data
+    """
+
+    Roxie_Data: RoxieData = RoxieData()

fiqus/data/DataWindingsCCT.py

@@ -1,37 +1,37 @@
-from pydantic import BaseModel
-from typing import List, Optional
-
-
-class Terminal(BaseModel):
-    vol_st: Optional[List[int]] = None  # volume number for terminal in for straightening
-    surf_st: Optional[List[int]] = None  # surface number for terminal in for straightening
-    vol_et: Optional[List[int]] = None  # volume number for terminal in for extending
-    surf_et: Optional[List[int]] = None  # surface number for terminal in for extending
-    lc_st: Optional[List[List[List[int]]]] = None  # line connections for straightening terminals
-    lc_et: Optional[List[List[List[int]]]] = None  # line connections for extending terminals
-    z_air: Optional[float] = None
-    z_add: Optional[float] = None
-    ndpterms: Optional[List[int]] = None  # number of divisions per terminal
-
-
-class Winding(BaseModel):
-    names: Optional[List[str]] = None  # name to use in gmsh and getdp
-    t_in: Terminal = Terminal()     # Terminal in
-    t_out: Terminal = Terminal()    # Terminal in
-
-
-class WindingsInformation(BaseModel):
-    magnet_name: Optional[str] = None
-    windings_avg_length: Optional[float] = None
-    windings: Winding = Winding()
-    w_names: Optional[List[str]] = None
-    f_names: Optional[List[str]] = None
-    formers: Optional[List[str]] = None
-    air: Optional[str] = None
-
-
-class SpliterBrep(BaseModel):  # Brep file model splitter data
-    magnet_name: Optional[str] = None
-    file_name: Optional[str] = None           # full file name for the brep file
-    vol_firsts: Optional[List[int]] = None    # list of first volumes for the partitioned model
-    vol_lasts: Optional[List[int]] = None      # list of last volumes for the partitioned model
+from pydantic import BaseModel
+from typing import List, Optional
+
+
+class Terminal(BaseModel):
+    vol_st: Optional[List[int]] = None  # volume number for terminal in for straightening
+    surf_st: Optional[List[int]] = None  # surface number for terminal in for straightening
+    vol_et: Optional[List[int]] = None  # volume number for terminal in for extending
+    surf_et: Optional[List[int]] = None  # surface number for terminal in for extending
+    lc_st: Optional[List[List[List[int]]]] = None  # line connections for straightening terminals
+    lc_et: Optional[List[List[List[int]]]] = None  # line connections for extending terminals
+    z_air: Optional[float] = None
+    z_add: Optional[float] = None
+    ndpterms: Optional[List[int]] = None  # number of divisions per terminal
+
+
+class Winding(BaseModel):
+    names: Optional[List[str]] = None  # name to use in gmsh and getdp
+    t_in: Terminal = Terminal()     # Terminal in
+    t_out: Terminal = Terminal()    # Terminal in
+
+
+class WindingsInformation(BaseModel):
+    magnet_name: Optional[str] = None
+    windings_avg_length: Optional[float] = None
+    windings: Winding = Winding()
+    w_names: Optional[List[str]] = None
+    f_names: Optional[List[str]] = None
+    formers: Optional[List[str]] = None
+    air: Optional[str] = None
+
+
+class SpliterBrep(BaseModel):  # Brep file model splitter data
+    magnet_name: Optional[str] = None
+    file_name: Optional[str] = None           # full file name for the brep file
+    vol_firsts: Optional[List[int]] = None    # list of first volumes for the partitioned model
+    vol_lasts: Optional[List[int]] = None      # list of last volumes for the partitioned model