fake-bpy-module 20240519__py3-none-any.whl → 20240521__py3-none-any.whl

bpy/ops/curve/__init__.pyi

@@ -1,4 +1,5 @@
 import typing
+import collections.abc
 import bpy.ops.transform
 import bpy.types
 
@@ -9,7 +10,7 @@ def cyclic_toggle(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    direction: str | int | None = "CYCLIC_U",
+    direction: str | None = "CYCLIC_U",
 ):
     """Make active spline closed/opened loop
 
@@ -17,7 +18,7 @@ def cyclic_toggle(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param direction: Direction, Direction to make surface cyclic in
-    :type direction: str | int | None
+    :type direction: str | None
     """
 
     ...
@@ -71,7 +72,7 @@ def delete(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    type: str | int | None = "VERT",
+    type: str | None = "VERT",
 ):
     """Delete selected control points or segments
 
@@ -79,7 +80,7 @@ def delete(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param type: Type, Which elements to delete
-    :type type: str | int | None
+    :type type: str | None
     """
 
     ...
@@ -103,7 +104,7 @@ def draw(
     execution_context: str | int | None = None,
     undo: bool | None = None,
     error_threshold: typing.Any | None = 0.0,
-    fit_method: str | int | None = "REFIT",
+    fit_method: str | None = "REFIT",
     corner_angle: typing.Any | None = 1.22173,
     use_cyclic: bool | typing.Any | None = True,
     stroke: bpy.types.bpy_prop_collection[bpy.types.OperatorStrokeElement]
@@ -118,7 +119,7 @@ def draw(
     :param error_threshold: Error, Error distance threshold (in object units)
     :type error_threshold: typing.Any | None
     :param fit_method: Fit Method
-    :type fit_method: str | int | None
+    :type fit_method: str | None
     :param corner_angle: Corner Angle
     :type corner_angle: typing.Any | None
     :param use_cyclic: Cyclic
@@ -169,7 +170,7 @@ def extrude(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    mode: str | int | None = "TRANSLATION",
+    mode: str | None = "TRANSLATION",
 ):
     """Extrude selected control point(s)
 
@@ -177,7 +178,7 @@ def extrude(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param mode: Mode
-    :type mode: str | int | None
+    :type mode: str | None
     """
 
     ...
@@ -206,7 +207,7 @@ def handle_type_set(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    type: str | int | None = "AUTOMATIC",
+    type: str | None = "AUTOMATIC",
 ):
     """Set type of handles for selected control points
 
@@ -214,7 +215,7 @@ def handle_type_set(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param type: Type, Spline type
-    :type type: str | int | None
+    :type type: str | None
     """
 
     ...
@@ -291,14 +292,14 @@ def pen(
     deselect_all: bool | typing.Any | None = False,
     select_passthrough: bool | typing.Any | None = False,
     extrude_point: bool | typing.Any | None = False,
-    extrude_handle: str | int | None = "VECTOR",
+    extrude_handle: str | None = "VECTOR",
     delete_point: bool | typing.Any | None = False,
     insert_point: bool | typing.Any | None = False,
     move_segment: bool | typing.Any | None = False,
     select_point: bool | typing.Any | None = False,
     move_point: bool | typing.Any | None = False,
     close_spline: bool | typing.Any | None = True,
-    close_spline_method: str | int | None = "OFF",
+    close_spline_method: str | None = "OFF",
     toggle_vector: bool | typing.Any | None = False,
     cycle_handle_type: bool | typing.Any | None = False,
 ):
@@ -320,7 +321,7 @@ def pen(
         :param extrude_point: Extrude Point, Add a point connected to the last selected point
         :type extrude_point: bool | typing.Any | None
         :param extrude_handle: Extrude Handle Type, Type of the extruded handle
-        :type extrude_handle: str | int | None
+        :type extrude_handle: str | None
         :param delete_point: Delete Point, Delete an existing point
         :type delete_point: bool | typing.Any | None
         :param insert_point: Insert Point, Insert Point into a curve segment
@@ -343,7 +344,7 @@ def pen(
 
     ON_CLICK
     On Click -- Spline closes on release if not dragged.
-        :type close_spline_method: str | int | None
+        :type close_spline_method: str | None
         :param toggle_vector: Toggle Vector, Toggle between Vector and Auto handles
         :type toggle_vector: bool | typing.Any | None
         :param cycle_handle_type: Cycle Handle Type, Cycle between all four handle types
@@ -358,7 +359,7 @@ def primitive_bezier_circle_add(
     undo: bool | None = None,
     radius: typing.Any | None = 1.0,
     enter_editmode: bool | typing.Any | None = False,
-    align: str | int | None = "WORLD",
+    align: str | None = "WORLD",
     location: typing.Any | None = (0.0, 0.0, 0.0),
     rotation: typing.Any | None = (0.0, 0.0, 0.0),
     scale: typing.Any | None = (0.0, 0.0, 0.0),
@@ -382,7 +383,7 @@ def primitive_bezier_circle_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: str | int | None
+        :type align: str | None
         :param location: Location, Location for the newly added object
         :type location: typing.Any | None
         :param rotation: Rotation, Rotation for the newly added object
@@ -399,7 +400,7 @@ def primitive_bezier_curve_add(
     undo: bool | None = None,
     radius: typing.Any | None = 1.0,
     enter_editmode: bool | typing.Any | None = False,
-    align: str | int | None = "WORLD",
+    align: str | None = "WORLD",
     location: typing.Any | None = (0.0, 0.0, 0.0),
     rotation: typing.Any | None = (0.0, 0.0, 0.0),
     scale: typing.Any | None = (0.0, 0.0, 0.0),
@@ -423,7 +424,7 @@ def primitive_bezier_curve_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: str | int | None
+        :type align: str | None
         :param location: Location, Location for the newly added object
         :type location: typing.Any | None
         :param rotation: Rotation, Rotation for the newly added object
@@ -440,7 +441,7 @@ def primitive_nurbs_circle_add(
     undo: bool | None = None,
     radius: typing.Any | None = 1.0,
     enter_editmode: bool | typing.Any | None = False,
-    align: str | int | None = "WORLD",
+    align: str | None = "WORLD",
     location: typing.Any | None = (0.0, 0.0, 0.0),
     rotation: typing.Any | None = (0.0, 0.0, 0.0),
     scale: typing.Any | None = (0.0, 0.0, 0.0),
@@ -464,7 +465,7 @@ def primitive_nurbs_circle_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: str | int | None
+        :type align: str | None
         :param location: Location, Location for the newly added object
         :type location: typing.Any | None
         :param rotation: Rotation, Rotation for the newly added object
@@ -481,7 +482,7 @@ def primitive_nurbs_curve_add(
     undo: bool | None = None,
     radius: typing.Any | None = 1.0,
     enter_editmode: bool | typing.Any | None = False,
-    align: str | int | None = "WORLD",
+    align: str | None = "WORLD",
     location: typing.Any | None = (0.0, 0.0, 0.0),
     rotation: typing.Any | None = (0.0, 0.0, 0.0),
     scale: typing.Any | None = (0.0, 0.0, 0.0),
@@ -505,7 +506,7 @@ def primitive_nurbs_curve_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: str | int | None
+        :type align: str | None
         :param location: Location, Location for the newly added object
         :type location: typing.Any | None
         :param rotation: Rotation, Rotation for the newly added object
@@ -522,7 +523,7 @@ def primitive_nurbs_path_add(
     undo: bool | None = None,
     radius: typing.Any | None = 1.0,
     enter_editmode: bool | typing.Any | None = False,
-    align: str | int | None = "WORLD",
+    align: str | None = "WORLD",
     location: typing.Any | None = (0.0, 0.0, 0.0),
     rotation: typing.Any | None = (0.0, 0.0, 0.0),
     scale: typing.Any | None = (0.0, 0.0, 0.0),
@@ -546,7 +547,7 @@ def primitive_nurbs_path_add(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: str | int | None
+        :type align: str | None
         :param location: Location, Location for the newly added object
         :type location: typing.Any | None
         :param rotation: Rotation, Rotation for the newly added object
@@ -595,7 +596,7 @@ def select_all(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    action: str | int | None = "TOGGLE",
+    action: str | None = "TOGGLE",
 ):
     """(De)select all control points
 
@@ -615,7 +616,7 @@ def select_all(
 
     INVERT
     Invert -- Invert selection of all elements.
-        :type action: str | int | None
+        :type action: str | None
     """
 
     ...
@@ -736,7 +737,7 @@ def select_random(
     undo: bool | None = None,
     ratio: typing.Any | None = 0.5,
     seed: typing.Any | None = 0,
-    action: str | int | None = "SELECT",
+    action: str | None = "SELECT",
 ):
     """Randomly select some control points
 
@@ -754,7 +755,7 @@ def select_random(
 
     DESELECT
     Deselect -- Deselect all elements.
-        :type action: str | int | None
+        :type action: str | None
     """
 
     ...
@@ -777,8 +778,8 @@ def select_similar(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    type: str | int | None = "WEIGHT",
-    compare: str | int | None = "EQUAL",
+    type: str | None = "WEIGHT",
+    compare: str | None = "EQUAL",
     threshold: typing.Any | None = 0.1,
 ):
     """Select similar curve points by property type
@@ -787,9 +788,9 @@ def select_similar(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | int | None
+    :type type: str | None
     :param compare: Compare
-    :type compare: str | int | None
+    :type compare: str | None
     :param threshold: Threshold
     :type threshold: typing.Any | None
     """
@@ -932,7 +933,7 @@ def spline_type_set(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    type: str | int | None = "POLY",
+    type: str | None = "POLY",
     use_handles: bool | typing.Any | None = False,
 ):
     """Set type of active spline
@@ -941,7 +942,7 @@ def spline_type_set(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param type: Type, Spline type
-    :type type: str | int | None
+    :type type: str | None
     :param use_handles: Handles, Use handles when converting Bézier curves into polygons
     :type use_handles: bool | typing.Any | None
     """

bpy/ops/curves/__init__.pyi

@@ -1,4 +1,5 @@
 import typing
+import collections.abc
 import bpy.ops.transform
 import bpy.types
 
@@ -11,7 +12,7 @@ def add_bezier(
     undo: bool | None = None,
     radius: typing.Any | None = 1.0,
     enter_editmode: bool | typing.Any | None = False,
-    align: str | int | None = "WORLD",
+    align: str | None = "WORLD",
     location: typing.Any | None = (0.0, 0.0, 0.0),
     rotation: typing.Any | None = (0.0, 0.0, 0.0),
     scale: typing.Any | None = (0.0, 0.0, 0.0),
@@ -35,7 +36,7 @@ def add_bezier(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: str | int | None
+        :type align: str | None
         :param location: Location, Location for the newly added object
         :type location: typing.Any | None
         :param rotation: Rotation, Rotation for the newly added object
@@ -52,7 +53,7 @@ def add_circle(
     undo: bool | None = None,
     radius: typing.Any | None = 1.0,
     enter_editmode: bool | typing.Any | None = False,
-    align: str | int | None = "WORLD",
+    align: str | None = "WORLD",
     location: typing.Any | None = (0.0, 0.0, 0.0),
     rotation: typing.Any | None = (0.0, 0.0, 0.0),
     scale: typing.Any | None = (0.0, 0.0, 0.0),
@@ -76,7 +77,7 @@ def add_circle(
 
     CURSOR
     3D Cursor -- Use the 3D cursor orientation for the new object.
-        :type align: str | int | None
+        :type align: str | None
         :param location: Location, Location for the newly added object
         :type location: typing.Any | None
         :param rotation: Rotation, Rotation for the newly added object
@@ -154,7 +155,7 @@ def curve_type_set(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    type: str | int | None = "POLY",
+    type: str | None = "POLY",
     use_handles: bool | typing.Any | None = False,
 ):
     """Set type of selected curves
@@ -163,7 +164,7 @@ def curve_type_set(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param type: Type, Curve type
-    :type type: str | int | None
+    :type type: str | None
     :param use_handles: Handles, Take handle information into account in the conversion
     :type use_handles: bool | typing.Any | None
     """
@@ -203,7 +204,7 @@ def draw(
     execution_context: str | int | None = None,
     undo: bool | None = None,
     error_threshold: typing.Any | None = 0.0,
-    fit_method: str | int | None = "REFIT",
+    fit_method: str | None = "REFIT",
     corner_angle: typing.Any | None = 1.22173,
     use_cyclic: bool | typing.Any | None = True,
     stroke: bpy.types.bpy_prop_collection[bpy.types.OperatorStrokeElement]
@@ -220,7 +221,7 @@ def draw(
     :param error_threshold: Error, Error distance threshold (in object units)
     :type error_threshold: typing.Any | None
     :param fit_method: Fit Method
-    :type fit_method: str | int | None
+    :type fit_method: str | None
     :param corner_angle: Corner Angle
     :type corner_angle: typing.Any | None
     :param use_cyclic: Cyclic
@@ -309,7 +310,7 @@ def handle_type_set(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    type: str | int | None = "AUTO",
+    type: str | None = "AUTO",
 ):
     """Set the handle type for bezier curves
 
@@ -317,7 +318,7 @@ def handle_type_set(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | int | None
+    :type type: str | None
     """
 
     ...
@@ -340,7 +341,7 @@ def select_all(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    action: str | int | None = "TOGGLE",
+    action: str | None = "TOGGLE",
 ):
     """(De)select all control points
 
@@ -360,7 +361,7 @@ def select_all(
 
     INVERT
     Invert -- Invert selection of all elements.
-        :type action: str | int | None
+        :type action: str | None
     """
 
     ...
@@ -451,7 +452,7 @@ def set_selection_domain(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    domain: str | int | None = "POINT",
+    domain: str | None = "POINT",
 ):
     """Change the mode used for selection masking in curves sculpt mode
 
@@ -459,7 +460,7 @@ def set_selection_domain(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param domain: Domain
-    :type domain: str | int | None
+    :type domain: str | None
     """
 
     ...
@@ -468,7 +469,7 @@ def snap_curves_to_surface(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    attach_mode: str | int | None = "NEAREST",
+    attach_mode: str | None = "NEAREST",
 ):
     """Move curves so that the first point is exactly on the surface mesh
 
@@ -482,7 +483,7 @@ def snap_curves_to_surface(
 
     DEFORM
     Deform -- Re-attach curves to a deformed surface using the existing attachment information. This only works when the topology of the surface mesh has not changed.
-        :type attach_mode: str | int | None
+        :type attach_mode: str | None
     """
 
     ...

bpy/ops/cycles/__init__.pyi

@@ -1,4 +1,5 @@
 import typing
+import collections.abc
 import bpy.types
 
 GenericType1 = typing.TypeVar("GenericType1")

bpy/ops/dpaint/__init__.pyi

@@ -1,4 +1,5 @@
 import typing
+import collections.abc
 import bpy.types
 
 GenericType1 = typing.TypeVar("GenericType1")
@@ -22,7 +23,7 @@ def output_toggle(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    output: str | int | None = "A",
+    output: str | None = "A",
 ):
     """Add or remove Dynamic Paint output data layer
 
@@ -30,7 +31,7 @@ def output_toggle(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param output: Output Toggle
-    :type output: str | int | None
+    :type output: str | None
     """
 
     ...
@@ -67,7 +68,7 @@ def type_toggle(
     override_context: dict[str, typing.Any] | bpy.types.Context | None = None,
     execution_context: str | int | None = None,
     undo: bool | None = None,
-    type: str | int | None = "CANVAS",
+    type: str | None = "CANVAS",
 ):
     """Toggle whether given type is active or not
 
@@ -75,7 +76,7 @@ def type_toggle(
     :type execution_context: str | int | None
     :type undo: bool | None
     :param type: Type
-    :type type: str | int | None
+    :type type: str | None
     """
 
     ...

bpy/ops/ed/__init__.pyi

@@ -1,4 +1,5 @@
 import typing
+import collections.abc
 import bpy.types
 
 GenericType1 = typing.TypeVar("GenericType1")
@@ -87,8 +88,8 @@ def lib_id_load_custom_preview(
     filemode: typing.Any | None = 9,
     show_multiview: bool | typing.Any | None = False,
     use_multiview: bool | typing.Any | None = False,
-    display_type: str | int | None = "DEFAULT",
-    sort_method: str | int | None = "",
+    display_type: str | None = "DEFAULT",
+    sort_method: str | None = "",
 ):
     """Choose an image to help identify the data-block visually
 
@@ -154,9 +155,9 @@ def lib_id_load_custom_preview(
 
     THUMBNAIL
     Thumbnails -- Display files as thumbnails.
-        :type display_type: str | int | None
+        :type display_type: str | None
         :param sort_method: File sorting mode
-        :type sort_method: str | int | None
+        :type sort_method: str | None
     """
 
     ...

bpy/ops/export_anim/__init__.pyi

@@ -1,4 +1,5 @@
 import typing
+import collections.abc
 import bpy.types
 
 GenericType1 = typing.TypeVar("GenericType1")
@@ -14,7 +15,7 @@ def bvh(
     global_scale: typing.Any | None = 1.0,
     frame_start: typing.Any | None = 0,
     frame_end: typing.Any | None = 0,
-    rotate_mode: str | int | None = "NATIVE",
+    rotate_mode: str | None = "NATIVE",
     root_transform_only: bool | typing.Any | None = False,
 ):
     """Save a BVH motion capture file from an armature
@@ -56,7 +57,7 @@ def bvh(
 
     ZYX
     Euler (ZYX) -- Convert rotations to euler ZYX.
-        :type rotate_mode: str | int | None
+        :type rotate_mode: str | None
         :param root_transform_only: Root Translation Only, Only write out translation channels for the root bone
         :type root_transform_only: bool | typing.Any | None
     """