esphome 2025.8.4__py3-none-any.whl → 2025.9.0b2__py3-none-any.whl

esphome/components/mipi_rgb/models/lilygo.py

@@ -0,0 +1,228 @@
+from esphome.config_validation import UNDEFINED
+
+from .st7701s import ST7701S
+
+# fmt: off
+ST7701S(
+    "T-PANEL-S3",
+    width=480,
+    height=480,
+    color_order="BGR",
+    invert_colors=False,
+    swap_xy=UNDEFINED,
+    spi_mode="MODE3",
+    cs_pin={"xl9535": None, "number": 17},
+    reset_pin={"xl9535": None, "number": 5},
+    hsync_pin=39,
+    vsync_pin=40,
+    pclk_pin=41,
+    data_pins={
+        "red": [12, 13, 42, 46, 45],
+        "green": [6, 7, 8, 9, 10, 11],
+        "blue": [1, 2, 3, 4, 5],
+    },
+    hsync_front_porch=20,
+    hsync_back_porch=0,
+    hsync_pulse_width=2,
+    vsync_front_porch=30,
+    vsync_back_porch=1,
+    vsync_pulse_width=8,
+    pclk_frequency="6MHz",
+    pclk_inverted=False,
+    initsequence=(
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13), (0xEF, 0x08), (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),
+        (0xC0, 0x3B, 0x00), (0xC1, 0x0B, 0x02), (0xC2, 0x30, 0x02, 0x37), (0xCC, 0x10),
+        (0xB0, 0x00, 0x0F, 0x16, 0x0E, 0x11, 0x07, 0x09, 0x09, 0x08, 0x23, 0x05, 0x11, 0x0F, 0x28, 0x2D, 0x18),
+        (0xB1, 0x00, 0x0F, 0x16, 0x0E, 0x11, 0x07, 0x09, 0x08, 0x09, 0x23, 0x05, 0x11, 0x0F, 0x28, 0x2D, 0x18),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x11),
+        (0xB0, 0x4D), (0xB1, 0x33), (0xB2, 0x87), (0xB5, 0x4B), (0xB7, 0x8C), (0xB8, 0x20), (0xC1, 0x78),
+        (0xC2, 0x78), (0xD0, 0x88), (0xE0, 0x00, 0x00, 0x02),
+        (0xE1, 0x02, 0xF0, 0x00, 0x00, 0x03, 0xF0, 0x00, 0x00, 0x00, 0x44, 0x44),
+        (0xE2, 0x10, 0x10, 0x40, 0x40, 0xF2, 0xF0, 0x00, 0x00, 0xF2, 0xF0, 0x00, 0x00),
+        (0xE3, 0x00, 0x00, 0x11, 0x11), (0xE4, 0x44, 0x44),
+        (0xE5, 0x07, 0xEF, 0xF0, 0xF0, 0x09, 0xF1, 0xF0, 0xF0, 0x03, 0xF3, 0xF0, 0xF0, 0x05, 0xED, 0xF0, 0xF0),
+        (0xE6, 0x00, 0x00, 0x11, 0x11), (0xE7, 0x44, 0x44),
+        (0xE8, 0x08, 0xF0, 0xF0, 0xF0, 0x0A, 0xF2, 0xF0, 0xF0, 0x04, 0xF4, 0xF0, 0xF0, 0x06, 0xEE, 0xF0, 0xF0),
+        (0xEB, 0x00, 0x00, 0xE4, 0xE4, 0x44, 0x88, 0x40),
+        (0xEC, 0x78, 0x00),
+        (0xED, 0x20, 0xF9, 0x87, 0x76, 0x65, 0x54, 0x4F, 0xFF, 0xFF, 0xF4, 0x45, 0x56, 0x67, 0x78, 0x9F, 0x02),
+        (0xEF, 0x10, 0x0D, 0x04, 0x08, 0x3F, 0x1F),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),
+    ),
+)
+
+
+t_rgb = ST7701S(
+    "T-RGB-2.1",
+    width=480,
+    height=480,
+    color_order="BGR",
+    pixel_mode="18bit",
+    invert_colors=False,
+    swap_xy=UNDEFINED,
+    spi_mode="MODE3",
+    cs_pin={"xl9535": None, "number": 3},
+    de_pin=45,
+    hsync_pin=47,
+    vsync_pin=41,
+    pclk_pin=42,
+    data_pins={
+        "red": [7, 6, 5, 3, 2],
+        "green": [14, 13, 12, 11, 10, 9],
+        "blue": [21, 18, 17, 16, 15],
+    },
+    hsync_front_porch=50,
+    hsync_pulse_width=1,
+    hsync_back_porch=30,
+    vsync_front_porch=20,
+    vsync_pulse_width=1,
+    vsync_back_porch=30,
+    pclk_frequency="12MHz",
+    pclk_inverted=False,
+    initsequence=(
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),
+
+        (0xC0, 0x3B, 0x00),
+        (0xC1, 0x0B, 0x02),
+        (0xC2, 0x07, 0x02),
+        (0xCC, 0x10),
+        (0xCD, 0x08),
+
+        (0xB0,
+         0x00, 0x11, 0x16, 0x0e,
+         0x11, 0x06, 0x05, 0x09,
+         0x08, 0x21, 0x06, 0x13,
+         0x10, 0x29, 0x31, 0x18),
+
+        (0xB1,
+         0x00, 0x11, 0x16, 0x0e,
+         0x11, 0x07, 0x05, 0x09,
+         0x09, 0x21, 0x05, 0x13,
+         0x11, 0x2a, 0x31, 0x18),
+
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x11),
+
+        (0xB0, 0x6D),
+        (0xB1, 0x37),
+        (0xB2, 0x81),
+        (0xB3, 0x80),
+        (0xB5, 0x43),
+        (0xB7, 0x85),
+        (0xB8, 0x20),
+
+        (0xC1, 0x78),
+        (0xC2, 0x78),
+        (0xC3, 0x8C),
+
+        (0xD0, 0x88),
+
+        (0xE0, 0x00, 0x00, 0x02),
+        (0xE1,
+         0x03, 0xA0, 0x00, 0x00,
+         0x04, 0xA0, 0x00, 0x00,
+         0x00, 0x20, 0x20),
+
+        (0xE2,
+         0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00,
+         0x00),
+
+        (0xE3, 0x00, 0x00, 0x11, 0x00),
+        (0xE4, 0x22, 0x00),
+
+        (0xE5,
+         0x05, 0xEC, 0xA0, 0xA0,
+         0x07, 0xEE, 0xA0, 0xA0,
+         0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00),
+
+        (0xE6, 0x00, 0x00, 0x11, 0x00),
+        (0xE7, 0x22, 0x00),
+
+        (0xE8,
+         0x06, 0xED, 0xA0, 0xA0,
+         0x08, 0xEF, 0xA0, 0xA0,
+         0x00, 0x00, 0x00, 0x00,
+         0x00, 0x00, 0x00, 0x00),
+
+        (0xEB, 0x00, 0x00, 0x40, 0x40, 0x00, 0x00, 0x10),
+
+        (0xED,
+         0xFF, 0xFF, 0xFF, 0xBA,
+         0x0A, 0xBF, 0x45, 0xFF,
+         0xFF, 0x54, 0xFB, 0xA0,
+         0xAB, 0xFF, 0xFF, 0xFF),
+
+        (0xEF, 0x10, 0x0D, 0x04, 0x08, 0x3F, 0x1F),
+
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13),
+        (0xEF, 0x08),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10)
+    )
+
+)
+t_rgb.extend(
+    "T-RGB-2.8",
+    initsequence=(
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13),
+        (0xEF, 0x08),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),
+        (0xC0, 0x3B, 0x00),
+        (0xC1, 0x10, 0x0C),
+        (0xC2, 0x07, 0x0A),
+        (0xC7, 0x00),
+        (0xC7, 0x10),
+        (0xCD, 0x08),
+        (0xB0,
+         0x05, 0x12, 0x98, 0x0e, 0x0F,
+         0x07, 0x07, 0x09, 0x09, 0x23,
+         0x05, 0x52, 0x0F, 0x67, 0x2C, 0x11),
+        (0xB1,
+         0x0B, 0x11, 0x97, 0x0C, 0x12,
+         0x06, 0x06, 0x08, 0x08, 0x22,
+         0x03, 0x51, 0x11, 0x66, 0x2B, 0x0F),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x11),
+        (0xB0, 0x5D),
+        (0xB1, 0x2D),
+        (0xB2, 0x81),
+        (0xB3, 0x80),
+        (0xB5, 0x4E),
+        (0xB7, 0x85),
+        (0xB8, 0x20),
+        (0xC1, 0x78),
+        (0xC2, 0x78),
+        (0xD0, 0x88),
+        (0xE0, 0x00, 0x00, 0x02),
+        (0xE1,
+         0x06, 0x30, 0x08, 0x30, 0x05,
+         0x30, 0x07, 0x30, 0x00, 0x33,
+         0x33),
+        (0xE2,
+         0x11, 0x11, 0x33, 0x33, 0xf4,
+         0x00, 0x00, 0x00, 0xf4, 0x00,
+         0x00, 0x00),
+        (0xE3, 0x00, 0x00, 0x11, 0x11),
+        (0xE4, 0x44, 0x44),
+        (0xE5,
+         0x0d, 0xf5, 0x30, 0xf0, 0x0f,
+         0xf7, 0x30, 0xf0, 0x09, 0xf1,
+         0x30, 0xf0, 0x0b, 0xf3, 0x30, 0xf0),
+        (0xE6, 0x00, 0x00, 0x11, 0x11),
+        (0xE7, 0x44, 0x44),
+        (0xE8,
+         0x0c, 0xf4, 0x30, 0xf0,
+         0x0e, 0xf6, 0x30, 0xf0,
+         0x08, 0xf0, 0x30, 0xf0,
+         0x0a, 0xf2, 0x30, 0xf0),
+        (0xe9, 0x36),
+        (0xEB, 0x00, 0x01, 0xe4, 0xe4, 0x44, 0x88, 0x40),
+        (0xED,
+         0xff, 0x10, 0xaf, 0x76,
+         0x54, 0x2b, 0xcf, 0xff,
+         0xff, 0xfc, 0xb2, 0x45,
+         0x67, 0xfa, 0x01, 0xff),
+        (0xEF, 0x08, 0x08, 0x08, 0x45, 0x3f, 0x54),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),
+    )
+)

esphome/components/mipi_rgb/models/rpi.py

@@ -0,0 +1,9 @@
+from esphome.components.mipi import DriverChip
+from esphome.config_validation import UNDEFINED
+
+# A driver chip for Raspberry Pi MIPI RGB displays. These require no init sequence
+DriverChip(
+    "RPI",
+    swap_xy=UNDEFINED,
+    initsequence=(),
+)

esphome/components/mipi_rgb/models/st7701s.py

@@ -0,0 +1,214 @@
+from esphome.components.mipi import (
+    MADCTL,
+    MADCTL_ML,
+    MADCTL_XFLIP,
+    MODE_BGR,
+    DriverChip,
+)
+from esphome.config_validation import UNDEFINED
+from esphome.const import CONF_COLOR_ORDER, CONF_HEIGHT, CONF_MIRROR_X, CONF_MIRROR_Y
+
+SDIR_CMD = 0xC7
+
+
+class ST7701S(DriverChip):
+    # The ST7701s does not use the standard MADCTL bits for x/y mirroring
+    def add_madctl(self, sequence: list, config: dict):
+        transform = self.get_transform(config)
+        madctl = 0x00
+        if config[CONF_COLOR_ORDER] == MODE_BGR:
+            madctl |= 0x08
+        if transform.get(CONF_MIRROR_Y):
+            madctl |= MADCTL_ML
+        sequence.append((MADCTL, madctl))
+        sdir = 0
+        if transform.get(CONF_MIRROR_X):
+            sdir |= 0x04
+            madctl |= MADCTL_XFLIP
+        sequence.append((SDIR_CMD, sdir))
+        return madctl
+
+    @property
+    def transforms(self) -> set[str]:
+        """
+        The ST7701 never supports axis swapping, and mirroring the y-axis only works for full height.
+        """
+        if self.get_default(CONF_HEIGHT) != 864:
+            return {CONF_MIRROR_X}
+        return {CONF_MIRROR_X, CONF_MIRROR_Y}
+
+
+# fmt: off
+st7701s = ST7701S(
+    "ST7701S",
+    width=480,
+    height=864,
+    swap_xy=UNDEFINED,
+    hsync_front_porch=20,
+    hsync_back_porch=10,
+    hsync_pulse_width=10,
+    vsync_front_porch=10,
+    vsync_back_porch=10,
+    vsync_pulse_width=10,
+    pclk_frequency="16MHz",
+    pclk_inverted=True,
+    initsequence=(
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),  # Page 0
+        (0xC0, 0x3B, 0x00), (0xC1, 0x0D, 0x02), (0xC2, 0x31, 0x05),
+        (0xB0, 0x00, 0x11, 0x18, 0x0E, 0x11, 0x06, 0x07, 0x08, 0x07, 0x22, 0x04, 0x12, 0x0F, 0xAA, 0x31, 0x18,),
+        (0xB1, 0x00, 0x11, 0x19, 0x0E, 0x12, 0x07, 0x08, 0x08, 0x08, 0x22, 0x04, 0x11, 0x11, 0xA9, 0x32, 0x18,),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x11),   # page 1
+        (0xB0, 0x60), (0xB1, 0x32), (0xB2, 0x07), (0xB3, 0x80), (0xB5, 0x49), (0xB7, 0x85), (0xB8, 0x21), (0xC1, 0x78),
+        (0xC2, 0x78), (0xE0, 0x00, 0x1B, 0x02),
+        (0xE1, 0x08, 0xA0, 0x00, 0x00, 0x07, 0xA0, 0x00, 0x00, 0x00, 0x44, 0x44),
+        (0xE2, 0x11, 0x11, 0x44, 0x44, 0xED, 0xA0, 0x00, 0x00, 0xEC, 0xA0, 0x00, 0x00),
+        (0xE3, 0x00, 0x00, 0x11, 0x11),
+        (0xE4, 0x44, 0x44),
+        (0xE5, 0x0A, 0xE9, 0xD8, 0xA0, 0x0C, 0xEB, 0xD8, 0xA0, 0x0E, 0xED, 0xD8, 0xA0, 0x10, 0xEF, 0xD8, 0xA0,),
+        (0xE6, 0x00, 0x00, 0x11, 0x11), (0xE7, 0x44, 0x44),
+        (0xE8, 0x09, 0xE8, 0xD8, 0xA0, 0x0B, 0xEA, 0xD8, 0xA0, 0x0D, 0xEC, 0xD8, 0xA0, 0x0F, 0xEE, 0xD8, 0xA0,),
+        (0xEB, 0x02, 0x00, 0xE4, 0xE4, 0x88, 0x00, 0x40), (0xEC, 0x3C, 0x00),
+        (0xED, 0xAB, 0x89, 0x76, 0x54, 0x02, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x20, 0x45, 0x67, 0x98, 0xBA,),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13),  # Page 3
+        (0xE5, 0xE4),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),  # Page 0
+        (0xCD, 0x08),
+    )
+)
+
+st7701s.extend(
+    "MAKERFABS-4",
+    width=480,
+    height=480,
+    color_order="RGB",
+    invert_colors=True,
+    pixel_mode="18bit",
+    cs_pin=1,
+    de_pin={
+        "number": 45,
+        "ignore_strapping_warning": True
+    },
+    hsync_pin=5,
+    vsync_pin=4,
+    pclk_pin=21,
+    data_pins={
+        "red": [39, 40, 41, 42, 2],
+        "green": [0, 9, 14, 47, 48, 3],
+        "blue": [6, 7, 15, 16, 8]
+    }
+)
+
+st7701s.extend(
+    "SEEED-INDICATOR-D1",
+    width=480,
+    height=480,
+    mirror_x=True,
+    mirror_y=True,
+    invert_colors=True,
+    pixel_mode="18bit",
+    spi_mode="MODE3",
+    data_rate="2MHz",
+    hsync_front_porch=10,
+    hsync_pulse_width=8,
+    hsync_back_porch=50,
+    vsync_front_porch=10,
+    vsync_pulse_width=8,
+    vsync_back_porch=20,
+    cs_pin={"pca9554": None, "number": 4},
+    de_pin=18,
+    hsync_pin=16,
+    vsync_pin=17,
+    pclk_pin=21,
+    pclk_inverted=False,
+    data_pins={
+        "red": [4, 3, 2, 1, 0],
+        "green": [10, 9, 8, 7, 6, 5],
+        "blue": [15, 14, 13, 12, 11]
+    },
+)
+
+st7701s.extend(
+    "UEDX48480021-MD80ET",
+    width=480,
+    height=480,
+    pixel_mode="18bit",
+    cs_pin=18,
+    reset_pin=8,
+    de_pin=17,
+    vsync_pin={"number": 3, "ignore_strapping_warning": True},
+    hsync_pin={"number": 46, "ignore_strapping_warning": True},
+    pclk_pin=9,
+    data_pins={
+        "red": [40, 41, 42, 2, 1],
+        "green": [21, 47, 48, 45, 38, 39],
+        "blue": [10, 11, {"number": 12, "allow_other_uses": True}, {"number": 13, "allow_other_uses": True}, 14]
+    },
+    initsequence=(
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13), (0xEF, 0x08), (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10),
+        (0xC0, 0x3B, 0x00), (0xC1, 0x0B, 0x02), (0xC2, 0x07, 0x02), (0xC7, 0x00), (0xCC, 0x10), (0xCD, 0x08),
+        (0xB0, 0x00, 0x11, 0x16, 0x0E, 0x11, 0x06, 0x05, 0x09, 0x08, 0x21, 0x06, 0x13, 0x10, 0x29, 0x31, 0x18),
+        (0xB1, 0x00, 0x11, 0x16, 0x0E, 0x11, 0x07, 0x05, 0x09, 0x09, 0x21, 0x05, 0x13, 0x11, 0x2A, 0x31, 0x18),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x11),
+        (0xB0, 0x6D), (0xB1, 0x37), (0xB2, 0x8B), (0xB3, 0x80), (0xB5, 0x43), (0xB7, 0x85),
+        (0xB8, 0x20), (0xC0, 0x09), (0xC1, 0x78), (0xC2, 0x78), (0xD0, 0x88),
+        (0xE0, 0x00, 0x00, 0x02),
+        (0xE1, 0x03, 0xA0, 0x00, 0x00, 0x04, 0xA0, 0x00, 0x00, 0x00, 0x20, 0x20),
+        (0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+        (0xE3, 0x00, 0x00, 0x11, 0x00),
+        (0xE4, 0x22, 0x00),
+        (0xE5, 0x05, 0xEC, 0xF6, 0xCA, 0x07, 0xEE, 0xF6, 0xCA, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+        (0xE6, 0x00, 0x00, 0x11, 0x00),
+        (0xE7, 0x22, 0x00),
+        (0xE8, 0x06, 0xED, 0xF6, 0xCA, 0x08, 0xEF, 0xF6, 0xCA, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+        (0xE9, 0x36, 0x00),
+        (0xEB, 0x00, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00),
+        (0xED, 0xFF, 0xFF, 0xFF, 0xBA, 0x0A, 0xFF, 0x45, 0xFF, 0xFF, 0x54, 0xFF, 0xA0, 0xAB, 0xFF, 0xFF, 0xFF),
+        (0xEF, 0x08, 0x08, 0x08, 0x45, 0x3F, 0x54),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13), (0xE8, 0x00, 0x0E), (0xFF, 0x77, 0x01, 0x00, 0x00, 0x00),
+        (0x11, 0x00), (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13), (0xE8, 0x00, 0x0C),
+        (0xE8, 0x00, 0x00), (0xFF, 0x77, 0x01, 0x00, 0x00, 0x00)
+    )
+)
+
+st7701s.extend(
+    "ZX2D10GE01R-V4848",
+    width=480,
+    height=480,
+    pixel_mode="18bit",
+    cs_pin=21,
+    de_pin=39,
+    vsync_pin=48,
+    hsync_pin=40,
+    pclk_pin={"number": 45, "ignore_strapping_warning": True},
+    pclk_frequency="15MHz",
+    pclk_inverted=True,
+    hsync_pulse_width=10,
+    hsync_back_porch=10,
+    hsync_front_porch=10,
+    vsync_pulse_width=2,
+    vsync_back_porch=12,
+    vsync_front_porch=14,
+    data_pins={
+        "red": [10, 16, 9, 15, 46],
+        "green": [8, 13, 18, 12, 11, 17],
+        "blue": [{"number": 47, "allow_other_uses": True}, {"number": 41, "allow_other_uses": True}, 0, 42, 14]
+    },
+    initsequence=(
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13), (0xEF, 0x08), (0xFF, 0x77, 0x01, 0x00, 0x00, 0x10), (0xC0, 0x3B, 0x00),
+        (0xC1, 0x0B, 0x02), (0xC2, 0x07, 0x02), (0xCC, 0x10), (0xCD, 0x08),
+        (0xB0, 0x00, 0x11, 0x16, 0x0e, 0x11, 0x06, 0x05, 0x09, 0x08, 0x21, 0x06, 0x13, 0x10, 0x29, 0x31, 0x18),
+        (0xB1, 0x00, 0x11, 0x16, 0x0e, 0x11, 0x07, 0x05, 0x09, 0x09, 0x21, 0x05, 0x13, 0x11, 0x2a, 0x31, 0x18),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x11), (0xB0, 0x6d), (0xB1, 0x37), (0xB2, 0x81), (0xB3, 0x80), (0xB5, 0x43),
+        (0xB7, 0x85), (0xB8, 0x20), (0xC1, 0x78), (0xC2, 0x78), (0xD0, 0x88), (0xE0, 0x00, 0x00, 0x02),
+        (0xE1, 0x03, 0xA0, 0x00, 0x00, 0x04, 0xA0, 0x00, 0x00, 0x00, 0x20, 0x20),
+        (0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+        (0xE3, 0x00, 0x00, 0x11, 0x00), (0xE4, 0x22, 0x00),
+        (0xE5, 0x05, 0xEC, 0xA0, 0xA0, 0x07, 0xEE, 0xA0, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+        (0xE6, 0x00, 0x00, 0x11, 0x00), (0xE7, 0x22, 0x00),
+        (0xE8, 0x06, 0xED, 0xA0, 0xA0, 0x08, 0xEF, 0xA0, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+        (0xEB, 0x00, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00),
+        (0xED, 0xFF, 0xFF, 0xFF, 0xBA, 0x0A, 0xBF, 0x45, 0xFF, 0xFF, 0x54, 0xFB, 0xA0, 0xAB, 0xFF, 0xFF, 0xFF),
+        (0xEF, 0x10, 0x0D, 0x04, 0x08, 0x3F, 0x1F),
+        (0xFF, 0x77, 0x01, 0x00, 0x00, 0x13), (0xEF, 0x08), (0xFF, 0x77, 0x01, 0x00, 0x00, 0x00)
+    )
+)

esphome/components/mipi_rgb/models/waveshare.py

@@ -0,0 +1,64 @@
+from esphome.components.mipi import DriverChip
+from esphome.config_validation import UNDEFINED
+
+from .st7701s import st7701s
+
+wave_4_3 = DriverChip(
+    "ESP32-S3-TOUCH-LCD-4.3",
+    swap_xy=UNDEFINED,
+    initsequence=(),
+    width=800,
+    height=480,
+    pclk_frequency="16MHz",
+    reset_pin={"ch422g": None, "number": 3},
+    enable_pin={"ch422g": None, "number": 2},
+    de_pin=5,
+    hsync_pin={"number": 46, "ignore_strapping_warning": True},
+    vsync_pin={"number": 3, "ignore_strapping_warning": True},
+    pclk_pin=7,
+    pclk_inverted=True,
+    hsync_front_porch=210,
+    hsync_pulse_width=30,
+    hsync_back_porch=30,
+    vsync_front_porch=4,
+    vsync_pulse_width=4,
+    vsync_back_porch=4,
+    data_pins={
+        "red": [1, 2, 42, 41, 40],
+        "green": [39, 0, 45, 48, 47, 21],
+        "blue": [14, 38, 18, 17, 10],
+    },
+)
+wave_4_3.extend(
+    "ESP32-S3-TOUCH-LCD-7-800X480",
+    enable_pin=[{"ch422g": None, "number": 2}, {"ch422g": None, "number": 6}],
+    hsync_back_porch=8,
+    hsync_front_porch=8,
+    hsync_pulse_width=4,
+    vsync_back_porch=16,
+    vsync_front_porch=16,
+    vsync_pulse_width=4,
+)
+
+st7701s.extend(
+    "WAVESHARE-4-480x480",
+    data_rate="2MHz",
+    spi_mode="MODE3",
+    color_order="BGR",
+    pixel_mode="18bit",
+    width=480,
+    height=480,
+    invert_colors=True,
+    cs_pin=42,
+    de_pin=40,
+    hsync_pin=38,
+    vsync_pin=39,
+    pclk_pin=41,
+    pclk_frequency="12MHz",
+    pclk_inverted=False,
+    data_pins={
+        "red": [46, 3, 8, 18, 17],
+        "green": [14, 13, 12, 11, 10, 9],
+        "blue": [5, 45, 48, 47, 21],
+    },
+)