esphome 2025.8.4__py3-none-any.whl → 2025.9.0b2__py3-none-any.whl

esphome/components/esp32_ble_beacon/esp32_ble_beacon.cpp

@@ -31,12 +31,13 @@ void ESP32BLEBeacon::dump_config() {
   char uuid[37];
   char *bpos = uuid;
   for (int8_t ii = 0; ii < 16; ++ii) {
-    bpos += sprintf(bpos, "%02X", this->uuid_[ii]);
+    *bpos++ = format_hex_pretty_char(this->uuid_[ii] >> 4);
+    *bpos++ = format_hex_pretty_char(this->uuid_[ii] & 0x0F);
     if (ii == 3 || ii == 5 || ii == 7 || ii == 9) {
-      bpos += sprintf(bpos, "-");
+      *bpos++ = '-';
     }
   }
-  uuid[36] = '\0';
+  *bpos = '\0';
   ESP_LOGCONFIG(TAG,
                 "  UUID: %s, Major: %u, Minor: %u, Min Interval: %ums, Max Interval: %ums, Measured Power: %d"
                 ", TX Power: %ddBm",

esphome/components/esp32_ble_client/ble_client_base.cpp

@@ -93,7 +93,7 @@ bool BLEClientBase::parse_device(const espbt::ESPBTDevice &device) {
     return false;
   if (this->address_ == 0 || device.address_uint64() != this->address_)
     return false;
-  if (this->state_ != espbt::ClientState::IDLE && this->state_ != espbt::ClientState::SEARCHING)
+  if (this->state_ != espbt::ClientState::IDLE)
     return false;
 
   this->log_event_("Found device");
@@ -168,8 +168,7 @@ void BLEClientBase::unconditional_disconnect() {
     this->log_gattc_warning_("esp_ble_gattc_close", err);
   }
 
-  if (this->state_ == espbt::ClientState::SEARCHING || this->state_ == espbt::ClientState::READY_TO_CONNECT ||
-      this->state_ == espbt::ClientState::DISCOVERED) {
+  if (this->state_ == espbt::ClientState::READY_TO_CONNECT || this->state_ == espbt::ClientState::DISCOVERED) {
     this->set_address(0);
     this->set_state(espbt::ClientState::IDLE);
   } else {
@@ -495,6 +494,11 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       break;
     }
 
+    case ESP_GATTC_UNREG_FOR_NOTIFY_EVT: {
+      this->log_gattc_event_("UNREG_FOR_NOTIFY");
+      break;
+    }
+
     default:
       // ideally would check all other events for matching conn_id
       ESP_LOGD(TAG, "[%d] [%s] Event %d", this->connection_index_, this->address_str_.c_str(), event);

esphome/components/esp32_ble_client/ble_client_base.h

@@ -60,11 +60,14 @@ class BLEClientBase : public espbt::ESPBTClient, public Component {
     if (address == 0) {
       this->address_str_ = "";
     } else {
-      this->address_str_ =
-          str_snprintf("%02X:%02X:%02X:%02X:%02X:%02X", 17, (uint8_t) (this->address_ >> 40) & 0xff,
-                       (uint8_t) (this->address_ >> 32) & 0xff, (uint8_t) (this->address_ >> 24) & 0xff,
-                       (uint8_t) (this->address_ >> 16) & 0xff, (uint8_t) (this->address_ >> 8) & 0xff,
-                       (uint8_t) (this->address_ >> 0) & 0xff);
+      char buf[18];
+      uint8_t mac[6] = {
+          (uint8_t) ((this->address_ >> 40) & 0xff), (uint8_t) ((this->address_ >> 32) & 0xff),
+          (uint8_t) ((this->address_ >> 24) & 0xff), (uint8_t) ((this->address_ >> 16) & 0xff),
+          (uint8_t) ((this->address_ >> 8) & 0xff),  (uint8_t) ((this->address_ >> 0) & 0xff),
+      };
+      format_mac_addr_upper(mac, buf);
+      this->address_str_ = buf;
     }
   }
   const std::string &address_str() const { return this->address_str_; }

esphome/components/esp32_ble_tracker/__init__.py

@@ -30,7 +30,7 @@ from esphome.const import (
     CONF_SERVICE_UUID,
     CONF_TRIGGER_ID,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.enum import StrEnum
 from esphome.types import ConfigType
 
@@ -368,7 +368,7 @@ async def to_code(config):
 # This needs to be run as a job with very low priority so that all components have
 # chance to call register_ble_tracker and register_client before the list is checked
 # and added to the global defines list.
-@coroutine_with_priority(-1000)
+@coroutine_with_priority(CoroPriority.FINAL)
 async def _add_ble_features():
     # Add feature-specific defines based on what's needed
     if BLEFeatures.ESP_BT_DEVICE in _required_features:

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -49,8 +49,6 @@ const char *client_state_to_string(ClientState state) {
       return "DISCONNECTING";
     case ClientState::IDLE:
       return "IDLE";
-    case ClientState::SEARCHING:
-      return "SEARCHING";
     case ClientState::DISCOVERED:
       return "DISCOVERED";
     case ClientState::READY_TO_CONNECT:
@@ -136,9 +134,8 @@ void ESP32BLETracker::loop() {
   ClientStateCounts counts = this->count_client_states_();
   if (counts != this->client_state_counts_) {
     this->client_state_counts_ = counts;
-    ESP_LOGD(TAG, "connecting: %d, discovered: %d, searching: %d, disconnecting: %d",
-             this->client_state_counts_.connecting, this->client_state_counts_.discovered,
-             this->client_state_counts_.searching, this->client_state_counts_.disconnecting);
+    ESP_LOGD(TAG, "connecting: %d, discovered: %d, disconnecting: %d", this->client_state_counts_.connecting,
+             this->client_state_counts_.discovered, this->client_state_counts_.disconnecting);
   }
 
   if (this->scanner_state_ == ScannerState::FAILED ||
@@ -158,10 +155,8 @@ void ESP32BLETracker::loop() {
     https://github.com/espressif/esp-idf/issues/6688
 
   */
-  bool promote_to_connecting = counts.discovered && !counts.searching && !counts.connecting;
 
-  if (this->scanner_state_ == ScannerState::IDLE && !counts.connecting && !counts.disconnecting &&
-      !promote_to_connecting) {
+  if (this->scanner_state_ == ScannerState::IDLE && !counts.connecting && !counts.disconnecting && !counts.discovered) {
 #ifdef USE_ESP32_BLE_SOFTWARE_COEXISTENCE
     this->update_coex_preference_(false);
 #endif
@@ -170,12 +165,11 @@ void ESP32BLETracker::loop() {
     }
   }
   // If there is a discovered client and no connecting
-  // clients and no clients using the scanner to search for
-  // devices, then promote the discovered client to ready to connect.
+  // clients, then promote the discovered client to ready to connect.
   // We check both RUNNING and IDLE states because:
   // - RUNNING: gap_scan_event_handler initiates stop_scan_() but promotion can happen immediately
   // - IDLE: Scanner has already stopped (naturally or by gap_scan_event_handler)
-  if (promote_to_connecting &&
+  if (counts.discovered && !counts.connecting &&
       (this->scanner_state_ == ScannerState::RUNNING || this->scanner_state_ == ScannerState::IDLE)) {
     this->try_promote_discovered_clients_();
   }
@@ -307,14 +301,7 @@ void ESP32BLETracker::gap_scan_event_handler(const BLEScanResult &scan_result) {
 
   if (scan_result.search_evt == ESP_GAP_SEARCH_INQ_RES_EVT) {
     // Process the scan result immediately
-    bool found_discovered_client = this->process_scan_result_(scan_result);
-
-    // If we found a discovered client that needs promotion, stop scanning
-    // This replaces the promote_to_connecting logic from loop()
-    if (found_discovered_client && this->scanner_state_ == ScannerState::RUNNING) {
-      ESP_LOGD(TAG, "Found discovered client, stopping scan for connection");
-      this->stop_scan_();
-    }
+    this->process_scan_result_(scan_result);
   } else if (scan_result.search_evt == ESP_GAP_SEARCH_INQ_CMPL_EVT) {
     // Scan finished on its own
     if (this->scanner_state_ != ScannerState::RUNNING) {
@@ -620,9 +607,8 @@ void ESPBTDevice::parse_adv_(const uint8_t *payload, uint8_t len) {
 }
 
 std::string ESPBTDevice::address_str() const {
-  char mac[24];
-  snprintf(mac, sizeof(mac), "%02X:%02X:%02X:%02X:%02X:%02X", this->address_[0], this->address_[1], this->address_[2],
-           this->address_[3], this->address_[4], this->address_[5]);
+  char mac[18];
+  format_mac_addr_upper(this->address_, mac);
   return mac;
 }
 
@@ -640,9 +626,8 @@ void ESP32BLETracker::dump_config() {
                 this->scan_duration_, this->scan_interval_ * 0.625f, this->scan_window_ * 0.625f,
                 this->scan_active_ ? "ACTIVE" : "PASSIVE", YESNO(this->scan_continuous_));
   ESP_LOGCONFIG(TAG, "  Scanner State: %s", this->scanner_state_to_string_(this->scanner_state_));
-  ESP_LOGCONFIG(TAG, "  Connecting: %d, discovered: %d, searching: %d, disconnecting: %d",
-                this->client_state_counts_.connecting, this->client_state_counts_.discovered,
-                this->client_state_counts_.searching, this->client_state_counts_.disconnecting);
+  ESP_LOGCONFIG(TAG, "  Connecting: %d, discovered: %d, disconnecting: %d", this->client_state_counts_.connecting,
+                this->client_state_counts_.discovered, this->client_state_counts_.disconnecting);
   if (this->scan_start_fail_count_) {
     ESP_LOGCONFIG(TAG, "  Scan Start Fail Count: %d", this->scan_start_fail_count_);
   }
@@ -720,20 +705,9 @@ bool ESPBTDevice::resolve_irk(const uint8_t *irk) const {
          ecb_ciphertext[13] == ((addr64 >> 16) & 0xff);
 }
 
-bool ESP32BLETracker::has_connecting_clients_() const {
-  for (auto *client : this->clients_) {
-    auto state = client->state();
-    if (state == ClientState::CONNECTING || state == ClientState::READY_TO_CONNECT) {
-      return true;
-    }
-  }
-  return false;
-}
 #endif  // USE_ESP32_BLE_DEVICE
 
-bool ESP32BLETracker::process_scan_result_(const BLEScanResult &scan_result) {
-  bool found_discovered_client = false;
-
+void ESP32BLETracker::process_scan_result_(const BLEScanResult &scan_result) {
   // Process raw advertisements
   if (this->raw_advertisements_) {
     for (auto *listener : this->listeners_) {
@@ -759,14 +733,6 @@ bool ESP32BLETracker::process_scan_result_(const BLEScanResult &scan_result) {
     for (auto *client : this->clients_) {
       if (client->parse_device(device)) {
         found = true;
-        // Check if this client is discovered and needs promotion
-        if (client->state() == ClientState::DISCOVERED) {
-          // Only check for connecting clients if we found a discovered client
-          // This matches the original logic: !connecting && client->state() == DISCOVERED
-          if (!this->has_connecting_clients_()) {
-            found_discovered_client = true;
-          }
-        }
       }
     }
 
@@ -775,8 +741,6 @@ bool ESP32BLETracker::process_scan_result_(const BLEScanResult &scan_result) {
     }
 #endif  // USE_ESP32_BLE_DEVICE
   }
-
-  return found_discovered_client;
 }
 
 void ESP32BLETracker::cleanup_scan_state_(bool is_stop_complete) {

esphome/components/esp32_ble_tracker/esp32_ble_tracker.h

@@ -141,12 +141,10 @@ class ESPBTDeviceListener {
 struct ClientStateCounts {
   uint8_t connecting = 0;
   uint8_t discovered = 0;
-  uint8_t searching = 0;
   uint8_t disconnecting = 0;
 
   bool operator==(const ClientStateCounts &other) const {
-    return connecting == other.connecting && discovered == other.discovered && searching == other.searching &&
-           disconnecting == other.disconnecting;
+    return connecting == other.connecting && discovered == other.discovered && disconnecting == other.disconnecting;
   }
 
   bool operator!=(const ClientStateCounts &other) const { return !(*this == other); }
@@ -159,8 +157,6 @@ enum class ClientState : uint8_t {
   DISCONNECTING,
   // Connection is idle, no device detected.
   IDLE,
-  // Searching for device.
-  SEARCHING,
   // Device advertisement found.
   DISCOVERED,
   // Device is discovered and the scanner is stopped
@@ -292,12 +288,7 @@ class ESP32BLETracker : public Component,
   /// Common cleanup logic when transitioning scanner to IDLE state
   void cleanup_scan_state_(bool is_stop_complete);
   /// Process a single scan result immediately
-  /// Returns true if a discovered client needs promotion to READY_TO_CONNECT
-  bool process_scan_result_(const BLEScanResult &scan_result);
-#ifdef USE_ESP32_BLE_DEVICE
-  /// Check if any clients are in connecting or ready to connect state
-  bool has_connecting_clients_() const;
-#endif
+  void process_scan_result_(const BLEScanResult &scan_result);
   /// Handle scanner failure states
   void handle_scanner_failure_();
   /// Try to promote discovered clients to ready to connect
@@ -321,9 +312,6 @@ class ESP32BLETracker : public Component,
         case ClientState::DISCOVERED:
           counts.discovered++;
           break;
-        case ClientState::SEARCHING:
-          counts.searching++;
-          break;
         case ClientState::CONNECTING:
         case ClientState::READY_TO_CONNECT:
           counts.connecting++;

esphome/components/esp8266/__init__.py

@@ -17,7 +17,7 @@ from esphome.const import (
     PLATFORM_ESP8266,
     ThreadModel,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.helpers import copy_file_if_changed
 
 from .boards import BOARDS, ESP8266_LD_SCRIPTS
@@ -176,7 +176,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-@coroutine_with_priority(1000)
+@coroutine_with_priority(CoroPriority.PLATFORM)
 async def to_code(config):
     cg.add(esp8266_ns.setup_preferences())
 

esphome/components/esp8266/core.cpp

@@ -58,8 +58,8 @@ extern "C" void resetPins() {  // NOLINT
 
 #ifdef USE_ESP8266_EARLY_PIN_INIT
   for (int i = 0; i < 16; i++) {
-    uint8_t mode = ESPHOME_ESP8266_GPIO_INITIAL_MODE[i];
-    uint8_t level = ESPHOME_ESP8266_GPIO_INITIAL_LEVEL[i];
+    uint8_t mode = progmem_read_byte(&ESPHOME_ESP8266_GPIO_INITIAL_MODE[i]);
+    uint8_t level = progmem_read_byte(&ESPHOME_ESP8266_GPIO_INITIAL_LEVEL[i]);
     if (mode != 255)
       pinMode(i, mode);  // NOLINT
     if (level != 255)

esphome/components/esp8266/gpio.py

@@ -17,7 +17,7 @@ from esphome.const import (
     CONF_PULLUP,
     PLATFORM_ESP8266,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 
 from . import boards
 from .const import KEY_BOARD, KEY_ESP8266, KEY_PIN_INITIAL_STATES, esp8266_ns
@@ -188,7 +188,7 @@ async def esp8266_pin_to_code(config):
     return var
 
 
-@coroutine_with_priority(-999.0)
+@coroutine_with_priority(CoroPriority.WORKAROUNDS)
 async def add_pin_initial_states_array():
     # Add includes at the very end, so that they override everything
     initial_states: list[PinInitialState] = CORE.data[KEY_ESP8266][
@@ -199,11 +199,11 @@ async def add_pin_initial_states_array():
 
     cg.add_global(
         cg.RawExpression(
-            f"const uint8_t ESPHOME_ESP8266_GPIO_INITIAL_MODE[16] = {{{initial_modes_s}}}"
+            f"const uint8_t ESPHOME_ESP8266_GPIO_INITIAL_MODE[16] PROGMEM = {{{initial_modes_s}}}"
         )
     )
     cg.add_global(
         cg.RawExpression(
-            f"const uint8_t ESPHOME_ESP8266_GPIO_INITIAL_LEVEL[16] = {{{initial_levels_s}}}"
+            f"const uint8_t ESPHOME_ESP8266_GPIO_INITIAL_LEVEL[16] PROGMEM = {{{initial_levels_s}}}"
         )
     )

esphome/components/esp8266/preferences.cpp

@@ -1,6 +1,7 @@
 #ifdef USE_ESP8266
 
 #include <c_types.h>
+#include <cinttypes>
 extern "C" {
 #include "spi_flash.h"
 }
@@ -12,7 +13,7 @@ extern "C" {
 #include "preferences.h"
 
 #include <cstring>
-#include <vector>
+#include <memory>
 
 namespace esphome {
 namespace esp8266 {
@@ -67,6 +68,8 @@ static uint32_t get_esp8266_flash_sector() {
 }
 static uint32_t get_esp8266_flash_address() { return get_esp8266_flash_sector() * SPI_FLASH_SEC_SIZE; }
 
+static inline size_t bytes_to_words(size_t bytes) { return (bytes + 3) / 4; }
+
 template<class It> uint32_t calculate_crc(It first, It last, uint32_t type) {
   uint32_t crc = type;
   while (first != last) {
@@ -117,47 +120,42 @@ static bool load_from_rtc(size_t offset, uint32_t *data, size_t len) {
 
 class ESP8266PreferenceBackend : public ESPPreferenceBackend {
  public:
-  size_t offset = 0;
   uint32_t type = 0;
+  uint16_t offset = 0;
+  uint8_t length_words = 0;  // Max 255 words (1020 bytes of data)
   bool in_flash = false;
-  size_t length_words = 0;
 
   bool save(const uint8_t *data, size_t len) override {
-    if ((len + 3) / 4 != length_words) {
+    if (bytes_to_words(len) != length_words) {
       return false;
     }
-    std::vector<uint32_t> buffer;
-    buffer.resize(length_words + 1);
-    memcpy(buffer.data(), data, len);
-    buffer[buffer.size() - 1] = calculate_crc(buffer.begin(), buffer.end() - 1, type);
+    size_t buffer_size = static_cast<size_t>(length_words) + 1;
+    std::unique_ptr<uint32_t[]> buffer(new uint32_t[buffer_size]());  // Note the () for zero-initialization
+    memcpy(buffer.get(), data, len);
+    buffer[length_words] = calculate_crc(buffer.get(), buffer.get() + length_words, type);
 
     if (in_flash) {
-      return save_to_flash(offset, buffer.data(), buffer.size());
-    } else {
-      return save_to_rtc(offset, buffer.data(), buffer.size());
+      return save_to_flash(offset, buffer.get(), buffer_size);
     }
+    return save_to_rtc(offset, buffer.get(), buffer_size);
   }
   bool load(uint8_t *data, size_t len) override {
-    if ((len + 3) / 4 != length_words) {
+    if (bytes_to_words(len) != length_words) {
       return false;
     }
-    std::vector<uint32_t> buffer;
-    buffer.resize(length_words + 1);
-    bool ret;
-    if (in_flash) {
-      ret = load_from_flash(offset, buffer.data(), buffer.size());
-    } else {
-      ret = load_from_rtc(offset, buffer.data(), buffer.size());
-    }
+    size_t buffer_size = static_cast<size_t>(length_words) + 1;
+    std::unique_ptr<uint32_t[]> buffer(new uint32_t[buffer_size]());
+    bool ret = in_flash ? load_from_flash(offset, buffer.get(), buffer_size)
+                        : load_from_rtc(offset, buffer.get(), buffer_size);
     if (!ret)
       return false;
 
-    uint32_t crc = calculate_crc(buffer.begin(), buffer.end() - 1, type);
-    if (buffer[buffer.size() - 1] != crc) {
+    uint32_t crc = calculate_crc(buffer.get(), buffer.get() + length_words, type);
+    if (buffer[length_words] != crc) {
       return false;
     }
 
-    memcpy(data, buffer.data(), len);
+    memcpy(data, buffer.get(), len);
     return true;
   }
 };
@@ -178,16 +176,20 @@ class ESP8266Preferences : public ESPPreferences {
   }
 
   ESPPreferenceObject make_preference(size_t length, uint32_t type, bool in_flash) override {
-    uint32_t length_words = (length + 3) / 4;
+    uint32_t length_words = bytes_to_words(length);
+    if (length_words > 255) {
+      ESP_LOGE(TAG, "Preference too large: %" PRIu32 " words > 255", length_words);
+      return {};
+    }
     if (in_flash) {
       uint32_t start = current_flash_offset;
       uint32_t end = start + length_words + 1;
       if (end > ESP8266_FLASH_STORAGE_SIZE)
         return {};
       auto *pref = new ESP8266PreferenceBackend();  // NOLINT(cppcoreguidelines-owning-memory)
-      pref->offset = start;
+      pref->offset = static_cast<uint16_t>(start);
       pref->type = type;
-      pref->length_words = length_words;
+      pref->length_words = static_cast<uint8_t>(length_words);
       pref->in_flash = true;
       current_flash_offset = end;
       return {pref};
@@ -213,9 +215,9 @@ class ESP8266Preferences : public ESPPreferences {
     uint32_t rtc_offset = in_normal ? start + 32 : start - 96;
 
     auto *pref = new ESP8266PreferenceBackend();  // NOLINT(cppcoreguidelines-owning-memory)
-    pref->offset = rtc_offset;
+    pref->offset = static_cast<uint16_t>(rtc_offset);
     pref->type = type;
-    pref->length_words = length_words;
+    pref->length_words = static_cast<uint8_t>(length_words);
     pref->in_flash = false;
     current_offset += length_words + 1;
     return pref;

esphome/components/esphome/ota/__init__.py

@@ -16,7 +16,7 @@ from esphome.const import (
     CONF_SAFE_MODE,
     CONF_VERSION,
 )
-from esphome.core import coroutine_with_priority
+from esphome.core import CoroPriority, coroutine_with_priority
 import esphome.final_validate as fv
 
 _LOGGER = logging.getLogger(__name__)
@@ -121,7 +121,7 @@ CONFIG_SCHEMA = (
 FINAL_VALIDATE_SCHEMA = ota_esphome_final_validate
 
 
-@coroutine_with_priority(52.0)
+@coroutine_with_priority(CoroPriority.COMMUNICATION)
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     cg.add(var.set_port(config[CONF_PORT]))

esphome/components/esphome/ota/ota_esphome.cpp

@@ -30,19 +30,19 @@ void ESPHomeOTAComponent::setup() {
 
   this->server_ = socket::socket_ip_loop_monitored(SOCK_STREAM, 0);  // monitored for incoming connections
   if (this->server_ == nullptr) {
-    this->log_socket_error_("creation");
+    this->log_socket_error_(LOG_STR("creation"));
     this->mark_failed();
     return;
   }
   int enable = 1;
   int err = this->server_->setsockopt(SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(int));
   if (err != 0) {
-    this->log_socket_error_("reuseaddr");
+    this->log_socket_error_(LOG_STR("reuseaddr"));
     // we can still continue
   }
   err = this->server_->setblocking(false);
   if (err != 0) {
-    this->log_socket_error_("non-blocking");
+    this->log_socket_error_(LOG_STR("non-blocking"));
     this->mark_failed();
     return;
   }
@@ -51,21 +51,21 @@ void ESPHomeOTAComponent::setup() {
 
   socklen_t sl = socket::set_sockaddr_any((struct sockaddr *) &server, sizeof(server), this->port_);
   if (sl == 0) {
-    this->log_socket_error_("set sockaddr");
+    this->log_socket_error_(LOG_STR("set sockaddr"));
     this->mark_failed();
     return;
   }
 
   err = this->server_->bind((struct sockaddr *) &server, sizeof(server));
   if (err != 0) {
-    this->log_socket_error_("bind");
+    this->log_socket_error_(LOG_STR("bind"));
     this->mark_failed();
     return;
   }
 
   err = this->server_->listen(4);
   if (err != 0) {
-    this->log_socket_error_("listen");
+    this->log_socket_error_(LOG_STR("listen"));
     this->mark_failed();
     return;
   }
@@ -114,17 +114,17 @@ void ESPHomeOTAComponent::handle_handshake_() {
       return;
     int err = this->client_->setsockopt(IPPROTO_TCP, TCP_NODELAY, &enable, sizeof(int));
     if (err != 0) {
-      this->log_socket_error_("nodelay");
+      this->log_socket_error_(LOG_STR("nodelay"));
       this->cleanup_connection_();
       return;
     }
     err = this->client_->setblocking(false);
     if (err != 0) {
-      this->log_socket_error_("non-blocking");
+      this->log_socket_error_(LOG_STR("non-blocking"));
       this->cleanup_connection_();
       return;
     }
-    this->log_start_("handshake");
+    this->log_start_(LOG_STR("handshake"));
     this->client_connect_time_ = App.get_loop_component_start_time();
     this->magic_buf_pos_ = 0;  // Reset magic buffer position
   }
@@ -150,7 +150,7 @@ void ESPHomeOTAComponent::handle_handshake_() {
     if (read <= 0) {
       // Error or connection closed
       if (read == -1) {
-        this->log_socket_error_("reading magic bytes");
+        this->log_socket_error_(LOG_STR("reading magic bytes"));
       } else {
         ESP_LOGW(TAG, "Remote closed during handshake");
       }
@@ -209,7 +209,7 @@ void ESPHomeOTAComponent::handle_data_() {
 
   // Read features - 1 byte
   if (!this->readall_(buf, 1)) {
-    this->log_read_error_("features");
+    this->log_read_error_(LOG_STR("features"));
     goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
   }
   ota_features = buf[0];  // NOLINT
@@ -288,7 +288,7 @@ void ESPHomeOTAComponent::handle_data_() {
 
   // Read size, 4 bytes MSB first
   if (!this->readall_(buf, 4)) {
-    this->log_read_error_("size");
+    this->log_read_error_(LOG_STR("size"));
     goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
   }
   ota_size = 0;
@@ -302,7 +302,7 @@ void ESPHomeOTAComponent::handle_data_() {
   // starting the update, set the warning status and notify
   // listeners. This ensures that port scanners do not
   // accidentally trigger the update process.
-  this->log_start_("update");
+  this->log_start_(LOG_STR("update"));
   this->status_set_warning();
 #ifdef USE_OTA_STATE_CALLBACK
   this->state_callback_.call(ota::OTA_STARTED, 0.0f, 0);
@@ -320,7 +320,7 @@ void ESPHomeOTAComponent::handle_data_() {
 
   // Read binary MD5, 32 bytes
   if (!this->readall_(buf, 32)) {
-    this->log_read_error_("MD5 checksum");
+    this->log_read_error_(LOG_STR("MD5 checksum"));
     goto error;  // NOLINT(cppcoreguidelines-avoid-goto)
   }
   sbuf[32] = '\0';
@@ -393,7 +393,7 @@ void ESPHomeOTAComponent::handle_data_() {
 
   // Read ACK
   if (!this->readall_(buf, 1) || buf[0] != ota::OTA_RESPONSE_OK) {
-    this->log_read_error_("ack");
+    this->log_read_error_(LOG_STR("ack"));
     // do not go to error, this is not fatal
   }
 
@@ -477,12 +477,14 @@ float ESPHomeOTAComponent::get_setup_priority() const { return setup_priority::A
 uint16_t ESPHomeOTAComponent::get_port() const { return this->port_; }
 void ESPHomeOTAComponent::set_port(uint16_t port) { this->port_ = port; }
 
-void ESPHomeOTAComponent::log_socket_error_(const char *msg) { ESP_LOGW(TAG, "Socket %s: errno %d", msg, errno); }
+void ESPHomeOTAComponent::log_socket_error_(const LogString *msg) {
+  ESP_LOGW(TAG, "Socket %s: errno %d", LOG_STR_ARG(msg), errno);
+}
 
-void ESPHomeOTAComponent::log_read_error_(const char *what) { ESP_LOGW(TAG, "Read %s failed", what); }
+void ESPHomeOTAComponent::log_read_error_(const LogString *what) { ESP_LOGW(TAG, "Read %s failed", LOG_STR_ARG(what)); }
 
-void ESPHomeOTAComponent::log_start_(const char *phase) {
-  ESP_LOGD(TAG, "Starting %s from %s", phase, this->client_->getpeername().c_str());
+void ESPHomeOTAComponent::log_start_(const LogString *phase) {
+  ESP_LOGD(TAG, "Starting %s from %s", LOG_STR_ARG(phase), this->client_->getpeername().c_str());
 }
 
 void ESPHomeOTAComponent::cleanup_connection_() {

esphome/components/esphome/ota/ota_esphome.h

@@ -2,10 +2,11 @@
 
 #include "esphome/core/defines.h"
 #ifdef USE_OTA
-#include "esphome/core/helpers.h"
-#include "esphome/core/preferences.h"
 #include "esphome/components/ota/ota_backend.h"
 #include "esphome/components/socket/socket.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+#include "esphome/core/preferences.h"
 
 namespace esphome {
 
@@ -31,9 +32,9 @@ class ESPHomeOTAComponent : public ota::OTAComponent {
   void handle_data_();
   bool readall_(uint8_t *buf, size_t len);
   bool writeall_(const uint8_t *buf, size_t len);
-  void log_socket_error_(const char *msg);
-  void log_read_error_(const char *what);
-  void log_start_(const char *phase);
+  void log_socket_error_(const LogString *msg);
+  void log_read_error_(const LogString *what);
+  void log_start_(const LogString *phase);
   void cleanup_connection_();
   void yield_and_feed_watchdog_();
 

esphome/components/ethernet/__init__.py

@@ -38,7 +38,12 @@ from esphome.const import (
     KEY_CORE,
     KEY_FRAMEWORK_VERSION,
 )
-from esphome.core import CORE, TimePeriodMilliseconds, coroutine_with_priority
+from esphome.core import (
+    CORE,
+    CoroPriority,
+    TimePeriodMilliseconds,
+    coroutine_with_priority,
+)
 import esphome.final_validate as fv
 
 CONFLICTS_WITH = ["wifi"]
@@ -289,7 +294,7 @@ def phy_register(address: int, value: int, page: int):
     )
 
 
-@coroutine_with_priority(60.0)
+@coroutine_with_priority(CoroPriority.COMMUNICATION)
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)