esphome 2025.7.4__py3-none-any.whl → 2025.8.0b1__py3-none-any.whl

esphome/components/airthings_wave_plus/sensor.py

@@ -7,6 +7,7 @@ from esphome.const import (
     CONF_ILLUMINANCE,
     CONF_RADON,
     CONF_RADON_LONG_TERM,
+    CONF_TVOC,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_ILLUMINANCE,
     ICON_RADIOACTIVE,
@@ -15,6 +16,7 @@ from esphome.const import (
     UNIT_LUX,
     UNIT_PARTS_PER_MILLION,
 )
+from esphome.types import ConfigType
 
 DEPENDENCIES = airthings_wave_base.DEPENDENCIES
 
@@ -25,35 +27,59 @@ AirthingsWavePlus = airthings_wave_plus_ns.class_(
     "AirthingsWavePlus", airthings_wave_base.AirthingsWaveBase
 )
 
+CONF_DEVICE_TYPE = "device_type"
+WaveDeviceType = airthings_wave_plus_ns.enum("WaveDeviceType")
+DEVICE_TYPES = {
+    "WAVE_PLUS": WaveDeviceType.WAVE_PLUS,
+    "WAVE_GEN2": WaveDeviceType.WAVE_GEN2,
+}
 
-CONFIG_SCHEMA = airthings_wave_base.BASE_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(AirthingsWavePlus),
-        cv.Optional(CONF_RADON): sensor.sensor_schema(
-            unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
-            icon=ICON_RADIOACTIVE,
-            accuracy_decimals=0,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional(CONF_RADON_LONG_TERM): sensor.sensor_schema(
-            unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
-            icon=ICON_RADIOACTIVE,
-            accuracy_decimals=0,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional(CONF_CO2): sensor.sensor_schema(
-            unit_of_measurement=UNIT_PARTS_PER_MILLION,
-            accuracy_decimals=0,
-            device_class=DEVICE_CLASS_CARBON_DIOXIDE,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional(CONF_ILLUMINANCE): sensor.sensor_schema(
-            unit_of_measurement=UNIT_LUX,
-            accuracy_decimals=0,
-            device_class=DEVICE_CLASS_ILLUMINANCE,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-    }
+
+def validate_wave_gen2_config(config: ConfigType) -> ConfigType:
+    """Validate that Wave Gen2 devices don't have CO2 or TVOC sensors."""
+    if config[CONF_DEVICE_TYPE] == "WAVE_GEN2":
+        if CONF_CO2 in config:
+            raise cv.Invalid("Wave Gen2 devices do not support CO2 sensor")
+        # Check for TVOC in the base schema config
+        if CONF_TVOC in config:
+            raise cv.Invalid("Wave Gen2 devices do not support TVOC sensor")
+    return config
+
+
+CONFIG_SCHEMA = cv.All(
+    airthings_wave_base.BASE_SCHEMA.extend(
+        {
+            cv.GenerateID(): cv.declare_id(AirthingsWavePlus),
+            cv.Optional(CONF_RADON): sensor.sensor_schema(
+                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+                icon=ICON_RADIOACTIVE,
+                accuracy_decimals=0,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_RADON_LONG_TERM): sensor.sensor_schema(
+                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+                icon=ICON_RADIOACTIVE,
+                accuracy_decimals=0,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_CO2): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PARTS_PER_MILLION,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_CARBON_DIOXIDE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_ILLUMINANCE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_LUX,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_ILLUMINANCE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_DEVICE_TYPE, default="WAVE_PLUS"): cv.enum(
+                DEVICE_TYPES, upper=True
+            ),
+        }
+    ),
+    validate_wave_gen2_config,
 )
 
 
@@ -73,3 +99,4 @@ async def to_code(config):
     if config_illuminance := config.get(CONF_ILLUMINANCE):
         sens = await sensor.new_sensor(config_illuminance)
         cg.add(var.set_illuminance(sens))
+    cg.add(var.set_device_type(config[CONF_DEVICE_TYPE]))

esphome/components/alarm_control_panel/__init__.py

@@ -301,8 +301,7 @@ async def alarm_action_disarm_to_code(config, action_id, template_arg, args):
 )
 async def alarm_action_pending_to_code(config, action_id, template_arg, args):
     paren = await cg.get_variable(config[CONF_ID])
-    var = cg.new_Pvariable(action_id, template_arg, paren)
-    return var
+    return cg.new_Pvariable(action_id, template_arg, paren)
 
 
 @automation.register_action(
@@ -310,8 +309,7 @@ async def alarm_action_pending_to_code(config, action_id, template_arg, args):
 )
 async def alarm_action_trigger_to_code(config, action_id, template_arg, args):
     paren = await cg.get_variable(config[CONF_ID])
-    var = cg.new_Pvariable(action_id, template_arg, paren)
-    return var
+    return cg.new_Pvariable(action_id, template_arg, paren)
 
 
 @automation.register_action(
@@ -319,8 +317,7 @@ async def alarm_action_trigger_to_code(config, action_id, template_arg, args):
 )
 async def alarm_action_chime_to_code(config, action_id, template_arg, args):
     paren = await cg.get_variable(config[CONF_ID])
-    var = cg.new_Pvariable(action_id, template_arg, paren)
-    return var
+    return cg.new_Pvariable(action_id, template_arg, paren)
 
 
 @automation.register_action(
@@ -333,8 +330,7 @@ async def alarm_action_chime_to_code(config, action_id, template_arg, args):
 )
 async def alarm_action_ready_to_code(config, action_id, template_arg, args):
     paren = await cg.get_variable(config[CONF_ID])
-    var = cg.new_Pvariable(action_id, template_arg, paren)
-    return var
+    return cg.new_Pvariable(action_id, template_arg, paren)
 
 
 @automation.register_condition(
@@ -352,4 +348,3 @@ async def alarm_control_panel_is_armed_to_code(
 @coroutine_with_priority(100.0)
 async def to_code(config):
     cg.add_global(alarm_control_panel_ns.using)
-    cg.add_define("USE_ALARM_CONTROL_PANEL")

esphome/components/am2315c/am2315c.cpp

@@ -90,8 +90,6 @@ bool AM2315C::convert_(uint8_t *data, float &humidity, float &temperature) {
 }
 
 void AM2315C::setup() {
-  ESP_LOGCONFIG(TAG, "Running setup");
-
   // get status
   uint8_t status = 0;
   if (this->read(&status, 1) != i2c::ERROR_OK) {

esphome/components/am2320/am2320.cpp

@@ -34,7 +34,6 @@ void AM2320Component::update() {
   this->status_clear_warning();
 }
 void AM2320Component::setup() {
-  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t data[8];
   data[0] = 0;
   data[1] = 4;

esphome/components/animation/__init__.py

@@ -34,17 +34,20 @@ SetFrameAction = animation_ns.class_(
     "AnimationSetFrameAction", automation.Action, cg.Parented.template(Animation_)
 )
 
-CONFIG_SCHEMA = espImage.IMAGE_SCHEMA.extend(
-    {
-        cv.Required(CONF_ID): cv.declare_id(Animation_),
-        cv.Optional(CONF_LOOP): cv.All(
-            {
-                cv.Optional(CONF_START_FRAME, default=0): cv.positive_int,
-                cv.Optional(CONF_END_FRAME): cv.positive_int,
-                cv.Optional(CONF_REPEAT): cv.positive_int,
-            }
-        ),
-    },
+CONFIG_SCHEMA = cv.All(
+    espImage.IMAGE_SCHEMA.extend(
+        {
+            cv.Required(CONF_ID): cv.declare_id(Animation_),
+            cv.Optional(CONF_LOOP): cv.All(
+                {
+                    cv.Optional(CONF_START_FRAME, default=0): cv.positive_int,
+                    cv.Optional(CONF_END_FRAME): cv.positive_int,
+                    cv.Optional(CONF_REPEAT): cv.positive_int,
+                }
+            ),
+        },
+    ),
+    espImage.validate_settings,
 )
 
 

esphome/components/apds9306/apds9306.cpp

@@ -54,8 +54,6 @@ enum {  // APDS9306 registers
   }
 
 void APDS9306::setup() {
-  ESP_LOGCONFIG(TAG, "Running setup");
-
   uint8_t id;
   if (!this->read_byte(APDS9306_PART_ID, &id)) {  // Part ID register
     this->error_code_ = COMMUNICATION_FAILED;
@@ -86,8 +84,6 @@ void APDS9306::setup() {
 
   // Set to active mode
   APDS9306_WRITE_BYTE(APDS9306_MAIN_CTRL, 0x02);
-
-  ESP_LOGCONFIG(TAG, "APDS9306 setup complete");
 }
 
 void APDS9306::dump_config() {

esphome/components/apds9960/apds9960.cpp

@@ -15,7 +15,6 @@ static const char *const TAG = "apds9960";
 #define APDS9960_WRITE_BYTE(reg, value) APDS9960_ERROR_CHECK(this->write_byte(reg, value));
 
 void APDS9960::setup() {
-  ESP_LOGCONFIG(TAG, "Running setup");
   uint8_t id;
   if (!this->read_byte(0x92, &id)) {  // ID register
     this->error_code_ = COMMUNICATION_FAILED;

esphome/components/api/__init__.py

@@ -29,7 +29,7 @@ from esphome.core import CORE, coroutine_with_priority
 DOMAIN = "api"
 DEPENDENCIES = ["network"]
 AUTO_LOAD = ["socket"]
-CODEOWNERS = ["@OttoWinter"]
+CODEOWNERS = ["@esphome/core"]
 
 api_ns = cg.esphome_ns.namespace("api")
 APIServer = api_ns.class_("APIServer", cg.Component, cg.Controller)
@@ -53,6 +53,8 @@ SERVICE_ARG_NATIVE_TYPES = {
 CONF_ENCRYPTION = "encryption"
 CONF_BATCH_DELAY = "batch_delay"
 CONF_CUSTOM_SERVICES = "custom_services"
+CONF_HOMEASSISTANT_SERVICES = "homeassistant_services"
+CONF_HOMEASSISTANT_STATES = "homeassistant_states"
 
 
 def validate_encryption_key(value):
@@ -118,6 +120,8 @@ CONFIG_SCHEMA = cv.All(
                 cv.Range(max=cv.TimePeriod(milliseconds=65535)),
             ),
             cv.Optional(CONF_CUSTOM_SERVICES, default=False): cv.boolean,
+            cv.Optional(CONF_HOMEASSISTANT_SERVICES, default=False): cv.boolean,
+            cv.Optional(CONF_HOMEASSISTANT_STATES, default=False): cv.boolean,
             cv.Optional(CONF_ON_CLIENT_CONNECTED): automation.validate_automation(
                 single=True
             ),
@@ -146,6 +150,12 @@ async def to_code(config):
     if config.get(CONF_ACTIONS) or config[CONF_CUSTOM_SERVICES]:
         cg.add_define("USE_API_SERVICES")
 
+    if config[CONF_HOMEASSISTANT_SERVICES]:
+        cg.add_define("USE_API_HOMEASSISTANT_SERVICES")
+
+    if config[CONF_HOMEASSISTANT_STATES]:
+        cg.add_define("USE_API_HOMEASSISTANT_STATES")
+
     if actions := config.get(CONF_ACTIONS, []):
         for conf in actions:
             template_args = []
@@ -235,6 +245,7 @@ HOMEASSISTANT_ACTION_ACTION_SCHEMA = cv.All(
     HOMEASSISTANT_ACTION_ACTION_SCHEMA,
 )
 async def homeassistant_service_to_code(config, action_id, template_arg, args):
+    cg.add_define("USE_API_HOMEASSISTANT_SERVICES")
     serv = await cg.get_variable(config[CONF_ID])
     var = cg.new_Pvariable(action_id, template_arg, serv, False)
     templ = await cg.templatable(config[CONF_ACTION], args, None)
@@ -278,6 +289,7 @@ HOMEASSISTANT_EVENT_ACTION_SCHEMA = cv.Schema(
     HOMEASSISTANT_EVENT_ACTION_SCHEMA,
 )
 async def homeassistant_event_to_code(config, action_id, template_arg, args):
+    cg.add_define("USE_API_HOMEASSISTANT_SERVICES")
     serv = await cg.get_variable(config[CONF_ID])
     var = cg.new_Pvariable(action_id, template_arg, serv, True)
     templ = await cg.templatable(config[CONF_EVENT], args, None)
@@ -323,9 +335,10 @@ async def api_connected_to_code(config, condition_id, template_arg, args):
 
 
 def FILTER_SOURCE_FILES() -> list[str]:
-    """Filter out api_pb2_dump.cpp when proto message dumping is not enabled
-    and user_services.cpp when no services are defined."""
-    files_to_filter = []
+    """Filter out api_pb2_dump.cpp when proto message dumping is not enabled,
+    user_services.cpp when no services are defined, and protocol-specific
+    implementations based on encryption configuration."""
+    files_to_filter: list[str] = []
 
     # api_pb2_dump.cpp is only needed when HAS_PROTO_MESSAGE_DUMP is defined
     # This is a particularly large file that still needs to be opened and read
@@ -341,4 +354,16 @@ def FILTER_SOURCE_FILES() -> list[str]:
     if config and not config.get(CONF_ACTIONS) and not config[CONF_CUSTOM_SERVICES]:
         files_to_filter.append("user_services.cpp")
 
+    # Filter protocol-specific implementations based on encryption configuration
+    encryption_config = config.get(CONF_ENCRYPTION) if config else None
+
+    # If encryption is not configured at all, we only need plaintext
+    if encryption_config is None:
+        files_to_filter.append("api_frame_helper_noise.cpp")
+    # If encryption is configured with a key, we only need noise
+    elif encryption_config.get(CONF_KEY):
+        files_to_filter.append("api_frame_helper_plaintext.cpp")
+    # If encryption is configured but no key is provided, we need both
+    # (this allows a plaintext client to provide a noise key)
+
     return files_to_filter