esphome 2025.6.3__py3-none-any.whl → 2025.7.0b2__py3-none-any.whl

esphome/components/sx126x/sx126x_reg.h

@@ -0,0 +1,163 @@
+#pragma once
+
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace sx126x {
+
+static const uint32_t XTAL_FREQ = 32000000;
+
+enum SX126xOpCode : uint8_t {
+  RADIO_GET_STATUS = 0xC0,
+  RADIO_WRITE_REGISTER = 0x0D,
+  RADIO_READ_REGISTER = 0x1D,
+  RADIO_WRITE_BUFFER = 0x0E,
+  RADIO_READ_BUFFER = 0x1E,
+  RADIO_SET_SLEEP = 0x84,
+  RADIO_SET_STANDBY = 0x80,
+  RADIO_SET_FS = 0xC1,
+  RADIO_SET_TX = 0x83,
+  RADIO_SET_RX = 0x82,
+  RADIO_SET_RXDUTYCYCLE = 0x94,
+  RADIO_SET_CAD = 0xC5,
+  RADIO_SET_TXCONTINUOUSWAVE = 0xD1,
+  RADIO_SET_TXCONTINUOUSPREAMBLE = 0xD2,
+  RADIO_SET_PACKETTYPE = 0x8A,
+  RADIO_GET_PACKETTYPE = 0x11,
+  RADIO_SET_RFFREQUENCY = 0x86,
+  RADIO_SET_TXPARAMS = 0x8E,
+  RADIO_SET_PACONFIG = 0x95,
+  RADIO_SET_CADPARAMS = 0x88,
+  RADIO_SET_BUFFERBASEADDRESS = 0x8F,
+  RADIO_SET_MODULATIONPARAMS = 0x8B,
+  RADIO_SET_PACKETPARAMS = 0x8C,
+  RADIO_GET_RXBUFFERSTATUS = 0x13,
+  RADIO_GET_PACKETSTATUS = 0x14,
+  RADIO_GET_RSSIINST = 0x15,
+  RADIO_GET_STATS = 0x10,
+  RADIO_RESET_STATS = 0x00,
+  RADIO_SET_DIOIRQPARAMS = 0x08,
+  RADIO_GET_IRQSTATUS = 0x12,
+  RADIO_CLR_IRQSTATUS = 0x02,
+  RADIO_CALIBRATE = 0x89,
+  RADIO_CALIBRATEIMAGE = 0x98,
+  RADIO_SET_REGULATORMODE = 0x96,
+  RADIO_GET_ERROR = 0x17,
+  RADIO_CLR_ERROR = 0x07,
+  RADIO_SET_TCXOMODE = 0x97,
+  RADIO_SET_TXFALLBACKMODE = 0x93,
+  RADIO_SET_RFSWITCHMODE = 0x9D,
+  RADIO_SET_STOPRXTIMERONPREAMBLE = 0x9F,
+  RADIO_SET_LORASYMBTIMEOUT = 0xA0,
+};
+
+enum SX126xRegister : uint16_t {
+  REG_VERSION_STRING = 0x0320,
+  REG_GFSK_SYNCWORD = 0x06C0,
+  REG_LORA_SYNCWORD = 0x0740,
+  REG_OCP = 0x08E7,
+};
+
+enum SX126xStandbyMode : uint8_t {
+  STDBY_RC = 0x00,
+  STDBY_XOSC = 0x01,
+};
+
+enum SX126xPacketType : uint8_t {
+  PACKET_TYPE_GFSK = 0x00,
+  PACKET_TYPE_LORA = 0x01,
+  PACKET_TYPE_LRHSS = 0x03,
+};
+
+enum SX126xFskBw : uint8_t {
+  FSK_BW_4800 = 0x1F,
+  FSK_BW_5800 = 0x17,
+  FSK_BW_7300 = 0x0F,
+  FSK_BW_9700 = 0x1E,
+  FSK_BW_11700 = 0x16,
+  FSK_BW_14600 = 0x0E,
+  FSK_BW_19500 = 0x1D,
+  FSK_BW_23400 = 0x15,
+  FSK_BW_29300 = 0x0D,
+  FSK_BW_39000 = 0x1C,
+  FSK_BW_46900 = 0x14,
+  FSK_BW_58600 = 0x0C,
+  FSK_BW_78200 = 0x1B,
+  FSK_BW_93800 = 0x13,
+  FSK_BW_117300 = 0x0B,
+  FSK_BW_156200 = 0x1A,
+  FSK_BW_187200 = 0x12,
+  FSK_BW_234300 = 0x0A,
+  FSK_BW_312000 = 0x19,
+  FSK_BW_373600 = 0x11,
+  FSK_BW_467000 = 0x09,
+};
+
+enum SX126xLoraBw : uint8_t {
+  LORA_BW_7810 = 0x00,
+  LORA_BW_10420 = 0x08,
+  LORA_BW_15630 = 0x01,
+  LORA_BW_20830 = 0x09,
+  LORA_BW_31250 = 0x02,
+  LORA_BW_41670 = 0x0A,
+  LORA_BW_62500 = 0x03,
+  LORA_BW_125000 = 0x04,
+  LORA_BW_250000 = 0x05,
+  LORA_BW_500000 = 0x06,
+};
+
+enum SX126xLoraCr : uint8_t {
+  LORA_CR_4_5 = 0x01,
+  LORA_CR_4_6 = 0x02,
+  LORA_CR_4_7 = 0x03,
+  LORA_CR_4_8 = 0x04,
+};
+
+enum SX126xIrqMasks : uint16_t {
+  IRQ_RADIO_NONE = 0x0000,
+  IRQ_TX_DONE = 0x0001,
+  IRQ_RX_DONE = 0x0002,
+  IRQ_PREAMBLE_DETECTED = 0x0004,
+  IRQ_SYNCWORD_VALID = 0x0008,
+  IRQ_HEADER_VALID = 0x0010,
+  IRQ_HEADER_ERROR = 0x0020,
+  IRQ_CRC_ERROR = 0x0040,
+  IRQ_CAD_DONE = 0x0080,
+  IRQ_CAD_ACTIVITY_DETECTED = 0x0100,
+  IRQ_RX_TX_TIMEOUT = 0x0200,
+  IRQ_RADIO_ALL = 0xFFFF,
+};
+
+enum SX126xTcxoCtrl : uint8_t {
+  TCXO_CTRL_1_6V = 0x00,
+  TCXO_CTRL_1_7V = 0x01,
+  TCXO_CTRL_1_8V = 0x02,
+  TCXO_CTRL_2_2V = 0x03,
+  TCXO_CTRL_2_4V = 0x04,
+  TCXO_CTRL_2_7V = 0x05,
+  TCXO_CTRL_3_0V = 0x06,
+  TCXO_CTRL_3_3V = 0x07,
+  TCXO_CTRL_NONE = 0xFF,
+};
+
+enum SX126xPulseShape : uint8_t {
+  NO_FILTER = 0x00,
+  GAUSSIAN_BT_0_3 = 0x08,
+  GAUSSIAN_BT_0_5 = 0x09,
+  GAUSSIAN_BT_0_7 = 0x0A,
+  GAUSSIAN_BT_1_0 = 0x0B,
+};
+
+enum SX126xRampTime : uint8_t {
+  PA_RAMP_10 = 0x00,
+  PA_RAMP_20 = 0x01,
+  PA_RAMP_40 = 0x02,
+  PA_RAMP_80 = 0x03,
+  PA_RAMP_200 = 0x04,
+  PA_RAMP_800 = 0x05,
+  PA_RAMP_1700 = 0x06,
+  PA_RAMP_3400 = 0x07,
+};
+
+}  // namespace sx126x
+}  // namespace esphome

esphome/components/sx127x/__init__.py

@@ -0,0 +1,325 @@
+from esphome import automation, pins
+import esphome.codegen as cg
+from esphome.components import spi
+import esphome.config_validation as cv
+from esphome.const import CONF_DATA, CONF_FREQUENCY, CONF_ID
+
+MULTI_CONF = True
+CODEOWNERS = ["@swoboda1337"]
+DEPENDENCIES = ["spi"]
+
+CONF_SX127X_ID = "sx127x_id"
+
+CONF_AUTO_CAL = "auto_cal"
+CONF_BANDWIDTH = "bandwidth"
+CONF_BITRATE = "bitrate"
+CONF_BITSYNC = "bitsync"
+CONF_CODING_RATE = "coding_rate"
+CONF_CRC_ENABLE = "crc_enable"
+CONF_DEVIATION = "deviation"
+CONF_DIO0_PIN = "dio0_pin"
+CONF_MODULATION = "modulation"
+CONF_ON_PACKET = "on_packet"
+CONF_PA_PIN = "pa_pin"
+CONF_PA_POWER = "pa_power"
+CONF_PA_RAMP = "pa_ramp"
+CONF_PACKET_MODE = "packet_mode"
+CONF_PAYLOAD_LENGTH = "payload_length"
+CONF_PREAMBLE_DETECT = "preamble_detect"
+CONF_PREAMBLE_ERRORS = "preamble_errors"
+CONF_PREAMBLE_POLARITY = "preamble_polarity"
+CONF_PREAMBLE_SIZE = "preamble_size"
+CONF_RST_PIN = "rst_pin"
+CONF_RX_FLOOR = "rx_floor"
+CONF_RX_START = "rx_start"
+CONF_SHAPING = "shaping"
+CONF_SPREADING_FACTOR = "spreading_factor"
+CONF_SYNC_VALUE = "sync_value"
+
+sx127x_ns = cg.esphome_ns.namespace("sx127x")
+SX127x = sx127x_ns.class_("SX127x", cg.Component, spi.SPIDevice)
+SX127xListener = sx127x_ns.class_("SX127xListener")
+SX127xBw = sx127x_ns.enum("SX127xBw")
+SX127xOpMode = sx127x_ns.enum("SX127xOpMode")
+SX127xPaConfig = sx127x_ns.enum("SX127xPaConfig")
+SX127xPaRamp = sx127x_ns.enum("SX127xPaRamp")
+SX127xModemCfg1 = sx127x_ns.enum("SX127xModemCfg1")
+
+BW = {
+    "2_6kHz": SX127xBw.SX127X_BW_2_6,
+    "3_1kHz": SX127xBw.SX127X_BW_3_1,
+    "3_9kHz": SX127xBw.SX127X_BW_3_9,
+    "5_2kHz": SX127xBw.SX127X_BW_5_2,
+    "6_3kHz": SX127xBw.SX127X_BW_6_3,
+    "7_8kHz": SX127xBw.SX127X_BW_7_8,
+    "10_4kHz": SX127xBw.SX127X_BW_10_4,
+    "12_5kHz": SX127xBw.SX127X_BW_12_5,
+    "15_6kHz": SX127xBw.SX127X_BW_15_6,
+    "20_8kHz": SX127xBw.SX127X_BW_20_8,
+    "25_0kHz": SX127xBw.SX127X_BW_25_0,
+    "31_3kHz": SX127xBw.SX127X_BW_31_3,
+    "41_7kHz": SX127xBw.SX127X_BW_41_7,
+    "50_0kHz": SX127xBw.SX127X_BW_50_0,
+    "62_5kHz": SX127xBw.SX127X_BW_62_5,
+    "83_3kHz": SX127xBw.SX127X_BW_83_3,
+    "100_0kHz": SX127xBw.SX127X_BW_100_0,
+    "125_0kHz": SX127xBw.SX127X_BW_125_0,
+    "166_7kHz": SX127xBw.SX127X_BW_166_7,
+    "200_0kHz": SX127xBw.SX127X_BW_200_0,
+    "250_0kHz": SX127xBw.SX127X_BW_250_0,
+    "500_0kHz": SX127xBw.SX127X_BW_500_0,
+}
+
+CODING_RATE = {
+    "CR_4_5": SX127xModemCfg1.CODING_RATE_4_5,
+    "CR_4_6": SX127xModemCfg1.CODING_RATE_4_6,
+    "CR_4_7": SX127xModemCfg1.CODING_RATE_4_7,
+    "CR_4_8": SX127xModemCfg1.CODING_RATE_4_8,
+}
+
+MOD = {
+    "LORA": SX127xOpMode.MOD_LORA,
+    "FSK": SX127xOpMode.MOD_FSK,
+    "OOK": SX127xOpMode.MOD_OOK,
+}
+
+PA_PIN = {
+    "RFO": SX127xPaConfig.PA_PIN_RFO,
+    "BOOST": SX127xPaConfig.PA_PIN_BOOST,
+}
+
+RAMP = {
+    "10us": SX127xPaRamp.PA_RAMP_10,
+    "12us": SX127xPaRamp.PA_RAMP_12,
+    "15us": SX127xPaRamp.PA_RAMP_15,
+    "20us": SX127xPaRamp.PA_RAMP_20,
+    "25us": SX127xPaRamp.PA_RAMP_25,
+    "31us": SX127xPaRamp.PA_RAMP_31,
+    "40us": SX127xPaRamp.PA_RAMP_40,
+    "50us": SX127xPaRamp.PA_RAMP_50,
+    "62us": SX127xPaRamp.PA_RAMP_62,
+    "100us": SX127xPaRamp.PA_RAMP_100,
+    "125us": SX127xPaRamp.PA_RAMP_125,
+    "250us": SX127xPaRamp.PA_RAMP_250,
+    "500us": SX127xPaRamp.PA_RAMP_500,
+    "1000us": SX127xPaRamp.PA_RAMP_1000,
+    "2000us": SX127xPaRamp.PA_RAMP_2000,
+    "3400us": SX127xPaRamp.PA_RAMP_3400,
+}
+
+SHAPING = {
+    "CUTOFF_BR_X_2": SX127xPaRamp.CUTOFF_BR_X_2,
+    "CUTOFF_BR_X_1": SX127xPaRamp.CUTOFF_BR_X_1,
+    "GAUSSIAN_BT_0_3": SX127xPaRamp.GAUSSIAN_BT_0_3,
+    "GAUSSIAN_BT_0_5": SX127xPaRamp.GAUSSIAN_BT_0_5,
+    "GAUSSIAN_BT_1_0": SX127xPaRamp.GAUSSIAN_BT_1_0,
+    "NONE": SX127xPaRamp.SHAPING_NONE,
+}
+
+RunImageCalAction = sx127x_ns.class_(
+    "RunImageCalAction", automation.Action, cg.Parented.template(SX127x)
+)
+SendPacketAction = sx127x_ns.class_(
+    "SendPacketAction", automation.Action, cg.Parented.template(SX127x)
+)
+SetModeTxAction = sx127x_ns.class_(
+    "SetModeTxAction", automation.Action, cg.Parented.template(SX127x)
+)
+SetModeRxAction = sx127x_ns.class_(
+    "SetModeRxAction", automation.Action, cg.Parented.template(SX127x)
+)
+SetModeSleepAction = sx127x_ns.class_(
+    "SetModeSleepAction", automation.Action, cg.Parented.template(SX127x)
+)
+SetModeStandbyAction = sx127x_ns.class_(
+    "SetModeStandbyAction", automation.Action, cg.Parented.template(SX127x)
+)
+
+
+def validate_raw_data(value):
+    if isinstance(value, str):
+        return value.encode("utf-8")
+    if isinstance(value, list):
+        return cv.Schema([cv.hex_uint8_t])(value)
+    raise cv.Invalid(
+        "data must either be a string wrapped in quotes or a list of bytes"
+    )
+
+
+def validate_config(config):
+    if config[CONF_MODULATION] == "LORA":
+        bws = [
+            "7_8kHz",
+            "10_4kHz",
+            "15_6kHz",
+            "20_8kHz",
+            "31_3kHz",
+            "41_7kHz",
+            "62_5kHz",
+            "125_0kHz",
+            "250_0kHz",
+            "500_0kHz",
+        ]
+        if config[CONF_BANDWIDTH] not in bws:
+            raise cv.Invalid(f"{config[CONF_BANDWIDTH]} is not available with LORA")
+        if CONF_DIO0_PIN not in config:
+            raise cv.Invalid("Cannot use LoRa without dio0_pin")
+        if config[CONF_PREAMBLE_SIZE] < 6:
+            raise cv.Invalid("Minimum 'preamble_size' is 6 with LORA")
+        if config[CONF_SPREADING_FACTOR] == 6 and config[CONF_PAYLOAD_LENGTH] == 0:
+            raise cv.Invalid("Payload length must be set when spreading factor is 6")
+    else:
+        if config[CONF_BANDWIDTH] == "500_0kHz":
+            raise cv.Invalid(f"{config[CONF_BANDWIDTH]} is only available with LORA")
+        if CONF_BITSYNC not in config:
+            raise cv.Invalid("Config 'bitsync' required with FSK/OOK")
+        if CONF_PACKET_MODE not in config:
+            raise cv.Invalid("Config 'packet_mode' required with FSK/OOK")
+        if config[CONF_PACKET_MODE] and CONF_DIO0_PIN not in config:
+            raise cv.Invalid("Config 'dio0_pin' required in packet mode")
+        if config[CONF_PAYLOAD_LENGTH] > 64:
+            raise cv.Invalid("Payload length must be <= 64 with FSK/OOK")
+    if config[CONF_PA_PIN] == "RFO" and config[CONF_PA_POWER] > 15:
+        raise cv.Invalid("PA power must be <= 15 dbm when using the RFO pin")
+    if config[CONF_PA_PIN] == "BOOST" and config[CONF_PA_POWER] < 2:
+        raise cv.Invalid("PA power must be >= 2 dbm when using the BOOST pin")
+    return config
+
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(SX127x),
+            cv.Optional(CONF_AUTO_CAL, default=True): cv.boolean,
+            cv.Optional(CONF_BANDWIDTH, default="125_0kHz"): cv.enum(BW),
+            cv.Optional(CONF_BITRATE, default=4800): cv.int_range(min=500, max=300000),
+            cv.Optional(CONF_BITSYNC): cv.boolean,
+            cv.Optional(CONF_CODING_RATE, default="CR_4_5"): cv.enum(CODING_RATE),
+            cv.Optional(CONF_CRC_ENABLE, default=False): cv.boolean,
+            cv.Optional(CONF_DEVIATION, default=5000): cv.int_range(min=0, max=100000),
+            cv.Optional(CONF_DIO0_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Required(CONF_FREQUENCY): cv.int_range(min=137000000, max=1020000000),
+            cv.Required(CONF_MODULATION): cv.enum(MOD),
+            cv.Optional(CONF_ON_PACKET): automation.validate_automation(single=True),
+            cv.Optional(CONF_PA_PIN, default="BOOST"): cv.enum(PA_PIN),
+            cv.Optional(CONF_PA_POWER, default=17): cv.int_range(min=0, max=17),
+            cv.Optional(CONF_PA_RAMP, default="40us"): cv.enum(RAMP),
+            cv.Optional(CONF_PACKET_MODE): cv.boolean,
+            cv.Optional(CONF_PAYLOAD_LENGTH, default=0): cv.int_range(min=0, max=256),
+            cv.Optional(CONF_PREAMBLE_DETECT, default=0): cv.int_range(min=0, max=3),
+            cv.Optional(CONF_PREAMBLE_ERRORS, default=0): cv.int_range(min=0, max=31),
+            cv.Optional(CONF_PREAMBLE_POLARITY, default=0xAA): cv.All(
+                cv.hex_int, cv.one_of(0xAA, 0x55)
+            ),
+            cv.Optional(CONF_PREAMBLE_SIZE, default=0): cv.int_range(min=0, max=65535),
+            cv.Required(CONF_RST_PIN): pins.internal_gpio_output_pin_schema,
+            cv.Optional(CONF_RX_FLOOR, default=-94): cv.float_range(min=-128, max=-1),
+            cv.Optional(CONF_RX_START, default=True): cv.boolean,
+            cv.Optional(CONF_SHAPING, default="NONE"): cv.enum(SHAPING),
+            cv.Optional(CONF_SPREADING_FACTOR, default=7): cv.int_range(min=6, max=12),
+            cv.Optional(CONF_SYNC_VALUE, default=[]): cv.ensure_list(cv.hex_uint8_t),
+        },
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(spi.spi_device_schema(True, 8e6, "mode0"))
+    .add_extra(validate_config)
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await spi.register_spi_device(var, config)
+    if CONF_ON_PACKET in config:
+        await automation.build_automation(
+            var.get_packet_trigger(),
+            [
+                (cg.std_vector.template(cg.uint8), "x"),
+                (cg.float_, "rssi"),
+                (cg.float_, "snr"),
+            ],
+            config[CONF_ON_PACKET],
+        )
+    if CONF_DIO0_PIN in config:
+        dio0_pin = await cg.gpio_pin_expression(config[CONF_DIO0_PIN])
+        cg.add(var.set_dio0_pin(dio0_pin))
+    rst_pin = await cg.gpio_pin_expression(config[CONF_RST_PIN])
+    cg.add(var.set_rst_pin(rst_pin))
+    cg.add(var.set_auto_cal(config[CONF_AUTO_CAL]))
+    cg.add(var.set_bandwidth(config[CONF_BANDWIDTH]))
+    cg.add(var.set_frequency(config[CONF_FREQUENCY]))
+    cg.add(var.set_deviation(config[CONF_DEVIATION]))
+    cg.add(var.set_modulation(config[CONF_MODULATION]))
+    if config[CONF_MODULATION] != "LORA":
+        cg.add(var.set_bitrate(config[CONF_BITRATE]))
+        cg.add(var.set_bitsync(config[CONF_BITSYNC]))
+        cg.add(var.set_packet_mode(config[CONF_PACKET_MODE]))
+    cg.add(var.set_pa_pin(config[CONF_PA_PIN]))
+    cg.add(var.set_pa_ramp(config[CONF_PA_RAMP]))
+    cg.add(var.set_pa_power(config[CONF_PA_POWER]))
+    cg.add(var.set_shaping(config[CONF_SHAPING]))
+    cg.add(var.set_crc_enable(config[CONF_CRC_ENABLE]))
+    cg.add(var.set_payload_length(config[CONF_PAYLOAD_LENGTH]))
+    cg.add(var.set_preamble_detect(config[CONF_PREAMBLE_DETECT]))
+    cg.add(var.set_preamble_size(config[CONF_PREAMBLE_SIZE]))
+    cg.add(var.set_preamble_polarity(config[CONF_PREAMBLE_POLARITY]))
+    cg.add(var.set_preamble_errors(config[CONF_PREAMBLE_ERRORS]))
+    cg.add(var.set_coding_rate(config[CONF_CODING_RATE]))
+    cg.add(var.set_spreading_factor(config[CONF_SPREADING_FACTOR]))
+    cg.add(var.set_sync_value(config[CONF_SYNC_VALUE]))
+    cg.add(var.set_rx_floor(config[CONF_RX_FLOOR]))
+    cg.add(var.set_rx_start(config[CONF_RX_START]))
+
+
+NO_ARGS_ACTION_SCHEMA = automation.maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(SX127x),
+    }
+)
+
+
+@automation.register_action(
+    "sx127x.run_image_cal", RunImageCalAction, NO_ARGS_ACTION_SCHEMA
+)
+@automation.register_action(
+    "sx127x.set_mode_tx", SetModeTxAction, NO_ARGS_ACTION_SCHEMA
+)
+@automation.register_action(
+    "sx127x.set_mode_rx", SetModeRxAction, NO_ARGS_ACTION_SCHEMA
+)
+@automation.register_action(
+    "sx127x.set_mode_sleep", SetModeSleepAction, NO_ARGS_ACTION_SCHEMA
+)
+@automation.register_action(
+    "sx127x.set_mode_standby", SetModeStandbyAction, NO_ARGS_ACTION_SCHEMA
+)
+async def no_args_action_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    return var
+
+
+SEND_PACKET_ACTION_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(SX127x),
+        cv.Required(CONF_DATA): cv.templatable(validate_raw_data),
+    },
+    key=CONF_DATA,
+)
+
+
+@automation.register_action(
+    "sx127x.send_packet", SendPacketAction, SEND_PACKET_ACTION_SCHEMA
+)
+async def send_packet_action_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    data = config[CONF_DATA]
+    if isinstance(data, bytes):
+        data = list(data)
+    if cg.is_template(data):
+        templ = await cg.templatable(data, args, cg.std_vector.template(cg.uint8))
+        cg.add(var.set_data_template(templ))
+    else:
+        cg.add(var.set_data_static(data))
+    return var

esphome/components/sx127x/automation.h

@@ -0,0 +1,62 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/automation.h"
+#include "esphome/components/sx127x/sx127x.h"
+
+namespace esphome {
+namespace sx127x {
+
+template<typename... Ts> class RunImageCalAction : public Action<Ts...>, public Parented<SX127x> {
+ public:
+  void play(Ts... x) override { this->parent_->run_image_cal(); }
+};
+
+template<typename... Ts> class SendPacketAction : public Action<Ts...>, public Parented<SX127x> {
+ public:
+  void set_data_template(std::function<std::vector<uint8_t>(Ts...)> func) {
+    this->data_func_ = func;
+    this->static_ = false;
+  }
+
+  void set_data_static(const std::vector<uint8_t> &data) {
+    this->data_static_ = data;
+    this->static_ = true;
+  }
+
+  void play(Ts... x) override {
+    if (this->static_) {
+      this->parent_->transmit_packet(this->data_static_);
+    } else {
+      this->parent_->transmit_packet(this->data_func_(x...));
+    }
+  }
+
+ protected:
+  bool static_{false};
+  std::function<std::vector<uint8_t>(Ts...)> data_func_{};
+  std::vector<uint8_t> data_static_{};
+};
+
+template<typename... Ts> class SetModeTxAction : public Action<Ts...>, public Parented<SX127x> {
+ public:
+  void play(Ts... x) override { this->parent_->set_mode_tx(); }
+};
+
+template<typename... Ts> class SetModeRxAction : public Action<Ts...>, public Parented<SX127x> {
+ public:
+  void play(Ts... x) override { this->parent_->set_mode_rx(); }
+};
+
+template<typename... Ts> class SetModeSleepAction : public Action<Ts...>, public Parented<SX127x> {
+ public:
+  void play(Ts... x) override { this->parent_->set_mode_sleep(); }
+};
+
+template<typename... Ts> class SetModeStandbyAction : public Action<Ts...>, public Parented<SX127x> {
+ public:
+  void play(Ts... x) override { this->parent_->set_mode_standby(); }
+};
+
+}  // namespace sx127x
+}  // namespace esphome

esphome/components/sx127x/packet_transport/__init__.py

@@ -0,0 +1,26 @@
+import esphome.codegen as cg
+from esphome.components.packet_transport import (
+    PacketTransport,
+    new_packet_transport,
+    transport_schema,
+)
+import esphome.config_validation as cv
+from esphome.cpp_types import PollingComponent
+
+from .. import CONF_SX127X_ID, SX127x, SX127xListener, sx127x_ns
+
+SX127xTransport = sx127x_ns.class_(
+    "SX127xTransport", PacketTransport, PollingComponent, SX127xListener
+)
+
+CONFIG_SCHEMA = transport_schema(SX127xTransport).extend(
+    {
+        cv.GenerateID(CONF_SX127X_ID): cv.use_id(SX127x),
+    }
+)
+
+
+async def to_code(config):
+    var, _ = await new_packet_transport(config)
+    sx127x = await cg.get_variable(config[CONF_SX127X_ID])
+    cg.add(var.set_parent(sx127x))

esphome/components/sx127x/packet_transport/sx127x_transport.cpp

@@ -0,0 +1,26 @@
+#include "esphome/core/log.h"
+#include "esphome/core/application.h"
+#include "sx127x_transport.h"
+
+namespace esphome {
+namespace sx127x {
+
+static const char *const TAG = "sx127x_transport";
+
+void SX127xTransport::setup() {
+  PacketTransport::setup();
+  this->parent_->register_listener(this);
+}
+
+void SX127xTransport::update() {
+  PacketTransport::update();
+  this->updated_ = true;
+  this->resend_data_ = true;
+}
+
+void SX127xTransport::send_packet(const std::vector<uint8_t> &buf) const { this->parent_->transmit_packet(buf); }
+
+void SX127xTransport::on_packet(const std::vector<uint8_t> &packet, float rssi, float snr) { this->process_(packet); }
+
+}  // namespace sx127x
+}  // namespace esphome

esphome/components/sx127x/packet_transport/sx127x_transport.h

@@ -0,0 +1,25 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sx127x/sx127x.h"
+#include "esphome/components/packet_transport/packet_transport.h"
+#include <vector>
+
+namespace esphome {
+namespace sx127x {
+
+class SX127xTransport : public packet_transport::PacketTransport, public Parented<SX127x>, public SX127xListener {
+ public:
+  void setup() override;
+  void update() override;
+  void on_packet(const std::vector<uint8_t> &packet, float rssi, float snr) override;
+  float get_setup_priority() const override { return setup_priority::AFTER_WIFI; }
+
+ protected:
+  void send_packet(const std::vector<uint8_t> &buf) const override;
+  bool should_send() override { return true; }
+  size_t get_max_packet_size() override { return this->parent_->get_max_packet_size(); }
+};
+
+}  // namespace sx127x
+}  // namespace esphome