esphome 2025.4.2__py3-none-any.whl → 2025.5.0__py3-none-any.whl

esphome/components/mipi_spi/models/jc.py

@@ -0,0 +1,260 @@
+from esphome.components.spi import TYPE_QUAD
+import esphome.config_validation as cv
+from esphome.const import CONF_IGNORE_STRAPPING_WARNING, CONF_NUMBER
+
+from .. import MODE_RGB
+from . import DriverChip
+
+AXS15231 = DriverChip(
+    "AXS15231",
+    draw_rounding=8,
+    swap_xy=cv.UNDEFINED,
+    color_order=MODE_RGB,
+    bus_mode=TYPE_QUAD,
+    initsequence=(
+        (0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5A, 0xA5),
+        (0xC1, 0x33),
+        (0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+    ),
+)
+
+AXS15231.extend(
+    "JC3248W535",
+    width=320,
+    height=480,
+    cs_pin={CONF_NUMBER: 45, CONF_IGNORE_STRAPPING_WARNING: True},
+    data_rate="40MHz",
+)
+
+DriverChip(
+    "JC3636W518",
+    height=360,
+    width=360,
+    offset_height=1,
+    draw_rounding=1,
+    cs_pin=10,
+    reset_pin=47,
+    invert_colors=True,
+    color_order=MODE_RGB,
+    bus_mode=TYPE_QUAD,
+    data_rate="40MHz",
+    initsequence=(
+        (0xF0, 0x08),
+        (0xF2, 0x08),
+        (0x9B, 0x51),
+        (0x86, 0x53),
+        (0xF2, 0x80),
+        (0xF0, 0x00),
+        (0xF0, 0x01),
+        (0xF1, 0x01),
+        (0xB0, 0x54),
+        (0xB1, 0x3F),
+        (0xB2, 0x2A),
+        (0xB4, 0x46),
+        (0xB5, 0x34),
+        (0xB6, 0xD5),
+        (0xB7, 0x30),
+        (0xBA, 0x00),
+        (0xBB, 0x08),
+        (0xBC, 0x08),
+        (0xBD, 0x00),
+        (0xC0, 0x80),
+        (0xC1, 0x10),
+        (0xC2, 0x37),
+        (0xC3, 0x80),
+        (0xC4, 0x10),
+        (0xC5, 0x37),
+        (0xC6, 0xA9),
+        (0xC7, 0x41),
+        (0xC8, 0x51),
+        (0xC9, 0xA9),
+        (0xCA, 0x41),
+        (0xCB, 0x51),
+        (0xD0, 0x91),
+        (0xD1, 0x68),
+        (0xD2, 0x69),
+        (0xF5, 0x00, 0xA5),
+        (0xDD, 0x3F),
+        (0xDE, 0x3F),
+        (0xF1, 0x10),
+        (0xF0, 0x00),
+        (0xF0, 0x02),
+        (
+            0xE0,
+            0x70,
+            0x09,
+            0x12,
+            0x0C,
+            0x0B,
+            0x27,
+            0x38,
+            0x54,
+            0x4E,
+            0x19,
+            0x15,
+            0x15,
+            0x2C,
+            0x2F,
+        ),
+        (
+            0xE1,
+            0x70,
+            0x08,
+            0x11,
+            0x0C,
+            0x0B,
+            0x27,
+            0x38,
+            0x43,
+            0x4C,
+            0x18,
+            0x14,
+            0x14,
+            0x2B,
+            0x2D,
+        ),
+        (0xF0, 0x10),
+        (0xF3, 0x10),
+        (0xE0, 0x08),
+        (0xE1, 0x00),
+        (0xE2, 0x00),
+        (0xE3, 0x00),
+        (0xE4, 0xE0),
+        (0xE5, 0x06),
+        (0xE6, 0x21),
+        (0xE7, 0x00),
+        (0xE8, 0x05),
+        (0xE9, 0x82),
+        (0xEA, 0xDF),
+        (0xEB, 0x89),
+        (0xEC, 0x20),
+        (0xED, 0x14),
+        (0xEE, 0xFF),
+        (0xEF, 0x00),
+        (0xF8, 0xFF),
+        (0xF9, 0x00),
+        (0xFA, 0x00),
+        (0xFB, 0x30),
+        (0xFC, 0x00),
+        (0xFD, 0x00),
+        (0xFE, 0x00),
+        (0xFF, 0x00),
+        (0x60, 0x42),
+        (0x61, 0xE0),
+        (0x62, 0x40),
+        (0x63, 0x40),
+        (0x64, 0x02),
+        (0x65, 0x00),
+        (0x66, 0x40),
+        (0x67, 0x03),
+        (0x68, 0x00),
+        (0x69, 0x00),
+        (0x6A, 0x00),
+        (0x6B, 0x00),
+        (0x70, 0x42),
+        (0x71, 0xE0),
+        (0x72, 0x40),
+        (0x73, 0x40),
+        (0x74, 0x02),
+        (0x75, 0x00),
+        (0x76, 0x40),
+        (0x77, 0x03),
+        (0x78, 0x00),
+        (0x79, 0x00),
+        (0x7A, 0x00),
+        (0x7B, 0x00),
+        (0x80, 0x48),
+        (0x81, 0x00),
+        (0x82, 0x05),
+        (0x83, 0x02),
+        (0x84, 0xDD),
+        (0x85, 0x00),
+        (0x86, 0x00),
+        (0x87, 0x00),
+        (0x88, 0x48),
+        (0x89, 0x00),
+        (0x8A, 0x07),
+        (0x8B, 0x02),
+        (0x8C, 0xDF),
+        (0x8D, 0x00),
+        (0x8E, 0x00),
+        (0x8F, 0x00),
+        (0x90, 0x48),
+        (0x91, 0x00),
+        (0x92, 0x09),
+        (0x93, 0x02),
+        (0x94, 0xE1),
+        (0x95, 0x00),
+        (0x96, 0x00),
+        (0x97, 0x00),
+        (0x98, 0x48),
+        (0x99, 0x00),
+        (0x9A, 0x0B),
+        (0x9B, 0x02),
+        (0x9C, 0xE3),
+        (0x9D, 0x00),
+        (0x9E, 0x00),
+        (0x9F, 0x00),
+        (0xA0, 0x48),
+        (0xA1, 0x00),
+        (0xA2, 0x04),
+        (0xA3, 0x02),
+        (0xA4, 0xDC),
+        (0xA5, 0x00),
+        (0xA6, 0x00),
+        (0xA7, 0x00),
+        (0xA8, 0x48),
+        (0xA9, 0x00),
+        (0xAA, 0x06),
+        (0xAB, 0x02),
+        (0xAC, 0xDE),
+        (0xAD, 0x00),
+        (0xAE, 0x00),
+        (0xAF, 0x00),
+        (0xB0, 0x48),
+        (0xB1, 0x00),
+        (0xB2, 0x08),
+        (0xB3, 0x02),
+        (0xB4, 0xE0),
+        (0xB5, 0x00),
+        (0xB6, 0x00),
+        (0xB7, 0x00),
+        (0xB8, 0x48),
+        (0xB9, 0x00),
+        (0xBA, 0x0A),
+        (0xBB, 0x02),
+        (0xBC, 0xE2),
+        (0xBD, 0x00),
+        (0xBE, 0x00),
+        (0xBF, 0x00),
+        (0xC0, 0x12),
+        (0xC1, 0xAA),
+        (0xC2, 0x65),
+        (0xC3, 0x74),
+        (0xC4, 0x47),
+        (0xC5, 0x56),
+        (0xC6, 0x00),
+        (0xC7, 0x88),
+        (0xC8, 0x99),
+        (0xC9, 0x33),
+        (0xD0, 0x21),
+        (0xD1, 0xAA),
+        (0xD2, 0x65),
+        (0xD3, 0x74),
+        (0xD4, 0x47),
+        (0xD5, 0x56),
+        (0xD6, 0x00),
+        (0xD7, 0x88),
+        (0xD8, 0x99),
+        (0xD9, 0x33),
+        (0xF3, 0x01),
+        (0xF0, 0x00),
+        (0xF0, 0x01),
+        (0xF1, 0x01),
+        (0xA0, 0x0B),
+        (0xA3, 0x2A),
+        (0xA5, 0xC3),
+    ),
+)
+
+models = {}

esphome/components/mipi_spi/models/lanbon.py

@@ -0,0 +1,15 @@
+from .ili import ST7789V
+
+ST7789V.extend(
+    "LANBON-L8",
+    width=240,
+    height=320,
+    mirror_x=True,
+    mirror_y=True,
+    data_rate="80MHz",
+    cs_pin=22,
+    dc_pin=21,
+    reset_pin=18,
+)
+
+models = {}

esphome/components/mipi_spi/models/lilygo.py

@@ -0,0 +1,60 @@
+from esphome.components.spi import TYPE_OCTAL
+
+from .. import MODE_BGR
+from .ili import ST7789V, ST7796
+
+ST7789V.extend(
+    "T-EMBED",
+    width=170,
+    height=320,
+    offset_width=35,
+    color_order=MODE_BGR,
+    invert_colors=True,
+    draw_rounding=1,
+    cs_pin=10,
+    dc_pin=13,
+    reset_pin=9,
+    data_rate="80MHz",
+)
+
+ST7789V.extend(
+    "T-DISPLAY",
+    height=240,
+    width=135,
+    offset_width=52,
+    offset_height=40,
+    draw_rounding=1,
+    cs_pin=5,
+    dc_pin=16,
+    invert_colors=True,
+)
+ST7789V.extend(
+    "T-DISPLAY-S3",
+    height=320,
+    width=170,
+    offset_width=35,
+    color_order=MODE_BGR,
+    invert_colors=True,
+    draw_rounding=1,
+    dc_pin=7,
+    cs_pin=6,
+    reset_pin=5,
+    enable_pin=[9, 15],
+    data_rate="10MHz",
+    bus_mode=TYPE_OCTAL,
+)
+
+ST7796.extend(
+    "T-DISPLAY-S3-PRO",
+    width=222,
+    height=480,
+    offset_width=49,
+    draw_rounding=1,
+    cs_pin=39,
+    reset_pin=47,
+    dc_pin=9,
+    backlight_pin=48,
+    invert_colors=True,
+)
+
+models = {}

esphome/components/mipi_spi/models/waveshare.py

@@ -0,0 +1,139 @@
+from . import DriverChip
+from .ili import ILI9488_A
+
+DriverChip(
+    "WAVESHARE-4-TFT",
+    width=320,
+    height=480,
+    invert_colors=True,
+    spi_16=True,
+    initsequence=(
+        (
+            0xF9,
+            0x00,
+            0x08,
+        ),
+        (
+            0xC0,
+            0x19,
+            0x1A,
+        ),
+        (
+            0xC1,
+            0x45,
+            0x00,
+        ),
+        (
+            0xC2,
+            0x33,
+        ),
+        (
+            0xC5,
+            0x00,
+            0x28,
+        ),
+        (
+            0xB1,
+            0xA0,
+            0x11,
+        ),
+        (
+            0xB4,
+            0x02,
+        ),
+        (
+            0xB6,
+            0x00,
+            0x42,
+            0x3B,
+        ),
+        (
+            0xB7,
+            0x07,
+        ),
+        (
+            0xE0,
+            0x1F,
+            0x25,
+            0x22,
+            0x0B,
+            0x06,
+            0x0A,
+            0x4E,
+            0xC6,
+            0x39,
+            0x00,
+            0x00,
+            0x00,
+            0x00,
+            0x00,
+            0x00,
+        ),
+        (
+            0xE1,
+            0x1F,
+            0x3F,
+            0x3F,
+            0x0F,
+            0x1F,
+            0x0F,
+            0x46,
+            0x49,
+            0x31,
+            0x05,
+            0x09,
+            0x03,
+            0x1C,
+            0x1A,
+            0x00,
+        ),
+        (
+            0xF1,
+            0x36,
+            0x04,
+            0x00,
+            0x3C,
+            0x0F,
+            0x0F,
+            0xA4,
+            0x02,
+        ),
+        (
+            0xF2,
+            0x18,
+            0xA3,
+            0x12,
+            0x02,
+            0x32,
+            0x12,
+            0xFF,
+            0x32,
+            0x00,
+        ),
+        (
+            0xF4,
+            0x40,
+            0x00,
+            0x08,
+            0x91,
+            0x04,
+        ),
+        (
+            0xF8,
+            0x21,
+            0x04,
+        ),
+    ),
+)
+
+ILI9488_A.extend(
+    "PICO-RESTOUCH-LCD-3.5",
+    spi_16=True,
+    pixel_mode="16bit",
+    mirror_x=True,
+    dc_pin=33,
+    cs_pin=34,
+    reset_pin=40,
+    data_rate="20MHz",
+    invert_colors=True,
+)

esphome/components/mitsubishi/climate.py

@@ -1,7 +1,6 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
 import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 CODEOWNERS = ["@RubyBailey"]
 AUTO_LOAD = ["climate_ir"]
@@ -44,9 +43,8 @@ VERTICAL_DIRECTIONS = {
 }
 
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
+CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(MitsubishiClimate).extend(
     {
-        cv.GenerateID(): cv.declare_id(MitsubishiClimate),
         cv.Optional(CONF_SET_FAN_MODE, default="3levels"): cv.enum(SETFANMODE),
         cv.Optional(CONF_SUPPORTS_DRY, default=False): cv.boolean,
         cv.Optional(CONF_SUPPORTS_FAN_ONLY, default=False): cv.boolean,
@@ -61,8 +59,7 @@ CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    var = await climate_ir.new_climate_ir(config)
 
     cg.add(var.set_fan_mode(config[CONF_SET_FAN_MODE]))
     cg.add(var.set_supports_dry(config[CONF_SUPPORTS_DRY]))

esphome/components/mitsubishi/mitsubishi.cpp

@@ -25,8 +25,8 @@ const uint8_t MITSUBISHI_FAN_AUTO = 0x00;
 
 const uint8_t MITSUBISHI_VERTICAL_VANE_SWING = 0x38;
 
-// const uint8_t MITSUBISHI_AUTO = 0X80;
-const uint8_t MITSUBISHI_OTHERWISE = 0X40;
+// const uint8_t MITSUBISHI_AUTO = 0x80;
+const uint8_t MITSUBISHI_OTHERWISE = 0x40;
 const uint8_t MITSUBISHI_POWERFUL = 0x08;
 
 // Optional presets used to enable some model features
@@ -42,13 +42,13 @@ const uint16_t MITSUBISHI_HEADER_SPACE = 1700;
 const uint16_t MITSUBISHI_MIN_GAP = 17500;
 
 // Marker bytes
-const uint8_t MITSUBISHI_BYTE00 = 0X23;
-const uint8_t MITSUBISHI_BYTE01 = 0XCB;
-const uint8_t MITSUBISHI_BYTE02 = 0X26;
-const uint8_t MITSUBISHI_BYTE03 = 0X01;
-const uint8_t MITSUBISHI_BYTE04 = 0X00;
-const uint8_t MITSUBISHI_BYTE13 = 0X00;
-const uint8_t MITSUBISHI_BYTE16 = 0X00;
+const uint8_t MITSUBISHI_BYTE00 = 0x23;
+const uint8_t MITSUBISHI_BYTE01 = 0xCB;
+const uint8_t MITSUBISHI_BYTE02 = 0x26;
+const uint8_t MITSUBISHI_BYTE03 = 0x01;
+const uint8_t MITSUBISHI_BYTE04 = 0x00;
+const uint8_t MITSUBISHI_BYTE13 = 0x00;
+const uint8_t MITSUBISHI_BYTE16 = 0x00;
 
 climate::ClimateTraits MitsubishiClimate::traits() {
   auto traits = climate::ClimateTraits();

esphome/components/mixer/speaker/mixer_speaker.cpp

@@ -53,14 +53,15 @@ void SourceSpeaker::dump_config() {
 }
 
 void SourceSpeaker::setup() {
-  this->parent_->get_output_speaker()->add_audio_output_callback(
-      [this](uint32_t new_playback_ms, uint32_t remainder_us, uint32_t pending_ms, uint32_t write_timestamp) {
-        uint32_t personal_playback_ms = std::min(new_playback_ms, this->pending_playback_ms_);
-        if (personal_playback_ms > 0) {
-          this->pending_playback_ms_ -= personal_playback_ms;
-          this->audio_output_callback_(personal_playback_ms, remainder_us, this->pending_playback_ms_, write_timestamp);
-        }
-      });
+  this->parent_->get_output_speaker()->add_audio_output_callback([this](uint32_t new_frames, int64_t write_timestamp) {
+    // The SourceSpeaker may not have included any audio in the mixed output, so verify there were pending frames
+    uint32_t speakers_playback_frames = std::min(new_frames, this->pending_playback_frames_);
+    this->pending_playback_frames_ -= speakers_playback_frames;
+
+    if (speakers_playback_frames > 0) {
+      this->audio_output_callback_(speakers_playback_frames, write_timestamp);
+    }
+  });
 }
 
 void SourceSpeaker::loop() {
@@ -153,6 +154,7 @@ esp_err_t SourceSpeaker::start_() {
     }
   }
 
+  this->pending_playback_frames_ = 0;  // reset
   return this->parent_->start(this->audio_stream_info_);
 }
 
@@ -542,11 +544,7 @@ void MixerSpeaker::audio_mixer_task(void *params) {
 
         // Update source speaker buffer length
         transfer_buffers_with_data[0]->decrease_buffer_length(active_stream_info.frames_to_bytes(frames_to_mix));
-        speakers_with_data[0]->accumulated_frames_read_ += frames_to_mix;
-
-        // Add new audio duration to the source speaker pending playback
-        speakers_with_data[0]->pending_playback_ms_ +=
-            active_stream_info.frames_to_milliseconds_with_remainder(&speakers_with_data[0]->accumulated_frames_read_);
+        speakers_with_data[0]->pending_playback_frames_ += frames_to_mix;
 
         // Update output transfer buffer length
         output_transfer_buffer->increase_buffer_length(
@@ -586,10 +584,6 @@ void MixerSpeaker::audio_mixer_task(void *params) {
                           reinterpret_cast<int16_t *>(output_transfer_buffer->get_buffer_end()),
                           this_mixer->audio_stream_info_.value(), frames_to_mix);
 
-        speakers_with_data[i]->pending_playback_ms_ +=
-            speakers_with_data[i]->get_audio_stream_info().frames_to_milliseconds_with_remainder(
-                &speakers_with_data[i]->accumulated_frames_read_);
-
         if (i != transfer_buffers_with_data.size() - 1) {
           // Need to mix more streams together, point primary buffer and stream info to the already mixed output
           primary_buffer = reinterpret_cast<int16_t *>(output_transfer_buffer->get_buffer_end());
@@ -601,11 +595,7 @@ void MixerSpeaker::audio_mixer_task(void *params) {
       for (int i = 0; i < transfer_buffers_with_data.size(); ++i) {
         transfer_buffers_with_data[i]->decrease_buffer_length(
             speakers_with_data[i]->get_audio_stream_info().frames_to_bytes(frames_to_mix));
-        speakers_with_data[i]->accumulated_frames_read_ += frames_to_mix;
-
-        speakers_with_data[i]->pending_playback_ms_ +=
-            speakers_with_data[i]->get_audio_stream_info().frames_to_milliseconds_with_remainder(
-                &speakers_with_data[i]->accumulated_frames_read_);
+        speakers_with_data[i]->pending_playback_frames_ += frames_to_mix;
       }
 
       // Update output transfer buffer length

esphome/components/mixer/speaker/mixer_speaker.h

@@ -114,9 +114,7 @@ class SourceSpeaker : public speaker::Speaker, public Component {
   uint32_t ducking_transition_samples_remaining_{0};
   uint32_t samples_per_ducking_step_{0};
 
-  uint32_t accumulated_frames_read_{0};
-
-  uint32_t pending_playback_ms_{0};
+  uint32_t pending_playback_frames_{0};
 };
 
 class MixerSpeaker : public Component {

esphome/components/mlx90393/sensor.py

@@ -63,6 +63,11 @@ def _validate(config):
                 raise cv.Invalid(
                     f"{axis}: {CONF_RESOLUTION} cannot be {res} with {CONF_TEMPERATURE_COMPENSATION} enabled"
                 )
+    if config[CONF_HALLCONF] == 0xC:
+        if (config[CONF_OVERSAMPLING], config[CONF_FILTER]) in [(0, 0), (1, 0), (0, 1)]:
+            raise cv.Invalid(
+                f"{CONF_OVERSAMPLING}=={config[CONF_OVERSAMPLING]} and {CONF_FILTER}=={config[CONF_FILTER]} not allowed with {CONF_HALLCONF}=={config[CONF_HALLCONF]:#02x}"
+            )
     return config