esphome 2025.4.2__py3-none-any.whl → 2025.5.0__py3-none-any.whl

esphome/components/atm90e32/sensor.py

@@ -33,6 +33,7 @@ from esphome.const import (
     UNIT_DEGREES,
     UNIT_HERTZ,
     UNIT_VOLT,
+    UNIT_VOLT_AMPS,
     UNIT_VOLT_AMPS_REACTIVE,
     UNIT_WATT,
     UNIT_WATT_HOURS,
@@ -45,10 +46,17 @@ CONF_GAIN_PGA = "gain_pga"
 CONF_CURRENT_PHASES = "current_phases"
 CONF_GAIN_VOLTAGE = "gain_voltage"
 CONF_GAIN_CT = "gain_ct"
+CONF_OFFSET_VOLTAGE = "offset_voltage"
+CONF_OFFSET_CURRENT = "offset_current"
+CONF_OFFSET_ACTIVE_POWER = "offset_active_power"
+CONF_OFFSET_REACTIVE_POWER = "offset_reactive_power"
 CONF_HARMONIC_POWER = "harmonic_power"
 CONF_PEAK_CURRENT = "peak_current"
 CONF_PEAK_CURRENT_SIGNED = "peak_current_signed"
 CONF_ENABLE_OFFSET_CALIBRATION = "enable_offset_calibration"
+CONF_ENABLE_GAIN_CALIBRATION = "enable_gain_calibration"
+CONF_PHASE_STATUS = "phase_status"
+CONF_FREQUENCY_STATUS = "frequency_status"
 UNIT_DEG = "degrees"
 LINE_FREQS = {
     "50HZ": 50,
@@ -92,10 +100,11 @@ ATM90E32_PHASE_SCHEMA = cv.Schema(
             unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
             icon=ICON_LIGHTBULB,
             accuracy_decimals=2,
+            device_class=DEVICE_CLASS_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
         cv.Optional(CONF_APPARENT_POWER): sensor.sensor_schema(
-            unit_of_measurement=UNIT_WATT,
+            unit_of_measurement=UNIT_VOLT_AMPS,
             accuracy_decimals=2,
             device_class=DEVICE_CLASS_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
@@ -137,6 +146,10 @@ ATM90E32_PHASE_SCHEMA = cv.Schema(
         ),
         cv.Optional(CONF_GAIN_VOLTAGE, default=7305): cv.uint16_t,
         cv.Optional(CONF_GAIN_CT, default=27961): cv.uint16_t,
+        cv.Optional(CONF_OFFSET_VOLTAGE, default=0): cv.int_,
+        cv.Optional(CONF_OFFSET_CURRENT, default=0): cv.int_,
+        cv.Optional(CONF_OFFSET_ACTIVE_POWER, default=0): cv.int_,
+        cv.Optional(CONF_OFFSET_REACTIVE_POWER, default=0): cv.int_,
     }
 )
 
@@ -164,9 +177,10 @@ CONFIG_SCHEMA = (
             cv.Optional(CONF_CURRENT_PHASES, default="3"): cv.enum(
                 CURRENT_PHASES, upper=True
             ),
-            cv.Optional(CONF_GAIN_PGA, default="2X"): cv.enum(PGA_GAINS, upper=True),
+            cv.Optional(CONF_GAIN_PGA, default="1X"): cv.enum(PGA_GAINS, upper=True),
             cv.Optional(CONF_PEAK_CURRENT_SIGNED, default=False): cv.boolean,
             cv.Optional(CONF_ENABLE_OFFSET_CALIBRATION, default=False): cv.boolean,
+            cv.Optional(CONF_ENABLE_GAIN_CALIBRATION, default=False): cv.boolean,
         }
     )
     .extend(cv.polling_component_schema("60s"))
@@ -185,6 +199,10 @@ async def to_code(config):
         conf = config[phase]
         cg.add(var.set_volt_gain(i, conf[CONF_GAIN_VOLTAGE]))
         cg.add(var.set_ct_gain(i, conf[CONF_GAIN_CT]))
+        cg.add(var.set_voltage_offset(i, conf[CONF_OFFSET_VOLTAGE]))
+        cg.add(var.set_current_offset(i, conf[CONF_OFFSET_CURRENT]))
+        cg.add(var.set_active_power_offset(i, conf[CONF_OFFSET_ACTIVE_POWER]))
+        cg.add(var.set_reactive_power_offset(i, conf[CONF_OFFSET_REACTIVE_POWER]))
         if voltage_config := conf.get(CONF_VOLTAGE):
             sens = await sensor.new_sensor(voltage_config)
             cg.add(var.set_voltage_sensor(i, sens))
@@ -218,16 +236,15 @@ async def to_code(config):
         if peak_current_config := conf.get(CONF_PEAK_CURRENT):
             sens = await sensor.new_sensor(peak_current_config)
             cg.add(var.set_peak_current_sensor(i, sens))
-
     if frequency_config := config.get(CONF_FREQUENCY):
         sens = await sensor.new_sensor(frequency_config)
         cg.add(var.set_freq_sensor(sens))
     if chip_temperature_config := config.get(CONF_CHIP_TEMPERATURE):
         sens = await sensor.new_sensor(chip_temperature_config)
         cg.add(var.set_chip_temperature_sensor(sens))
-
     cg.add(var.set_line_freq(config[CONF_LINE_FREQUENCY]))
     cg.add(var.set_current_phases(config[CONF_CURRENT_PHASES]))
     cg.add(var.set_pga_gain(config[CONF_GAIN_PGA]))
     cg.add(var.set_peak_current_signed(config[CONF_PEAK_CURRENT_SIGNED]))
     cg.add(var.set_enable_offset_calibration(config[CONF_ENABLE_OFFSET_CALIBRATION]))
+    cg.add(var.set_enable_gain_calibration(config[CONF_ENABLE_GAIN_CALIBRATION]))

esphome/components/atm90e32/text_sensor/__init__.py

@@ -0,0 +1,48 @@
+import esphome.codegen as cg
+from esphome.components import text_sensor
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C
+
+from ..sensor import ATM90E32Component
+
+CONF_PHASE_STATUS = "phase_status"
+CONF_FREQUENCY_STATUS = "frequency_status"
+PHASE_KEYS = [CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C]
+
+PHASE_STATUS_SCHEMA = cv.Schema(
+    {
+        cv.Optional(CONF_PHASE_A): text_sensor.text_sensor_schema(
+            icon="mdi:flash-alert"
+        ),
+        cv.Optional(CONF_PHASE_B): text_sensor.text_sensor_schema(
+            icon="mdi:flash-alert"
+        ),
+        cv.Optional(CONF_PHASE_C): text_sensor.text_sensor_schema(
+            icon="mdi:flash-alert"
+        ),
+    }
+)
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.use_id(ATM90E32Component),
+        cv.Optional(CONF_PHASE_STATUS): PHASE_STATUS_SCHEMA,
+        cv.Optional(CONF_FREQUENCY_STATUS): text_sensor.text_sensor_schema(
+            icon="mdi:lightbulb-alert"
+        ),
+    }
+)
+
+
+async def to_code(config):
+    parent = await cg.get_variable(config[CONF_ID])
+
+    if phase_cfg := config.get(CONF_PHASE_STATUS):
+        for i, key in enumerate(PHASE_KEYS):
+            if sub_phase_cfg := phase_cfg.get(key):
+                sens = await text_sensor.new_text_sensor(sub_phase_cfg)
+                cg.add(parent.set_phase_status_text_sensor(i, sens))
+
+    if freq_status_config := config.get(CONF_FREQUENCY_STATUS):
+        sens = await text_sensor.new_text_sensor(freq_status_config)
+        cg.add(parent.set_freq_status_text_sensor(sens))

esphome/components/audio/__init__.py

@@ -37,29 +37,32 @@ AUDIO_COMPONENT_SCHEMA = cv.Schema(
 )
 
 
-_UNDEF = object()
-
-
 def set_stream_limits(
-    min_bits_per_sample: int = _UNDEF,
-    max_bits_per_sample: int = _UNDEF,
-    min_channels: int = _UNDEF,
-    max_channels: int = _UNDEF,
-    min_sample_rate: int = _UNDEF,
-    max_sample_rate: int = _UNDEF,
+    min_bits_per_sample: int = cv.UNDEFINED,
+    max_bits_per_sample: int = cv.UNDEFINED,
+    min_channels: int = cv.UNDEFINED,
+    max_channels: int = cv.UNDEFINED,
+    min_sample_rate: int = cv.UNDEFINED,
+    max_sample_rate: int = cv.UNDEFINED,
 ):
+    """Sets the limits for the audio stream that audio component can handle
+
+    When the component sinks audio (e.g., a speaker), these indicate the limits to the audio it can receive.
+    When the component sources audio (e.g., a microphone), these indicate the limits to the audio it can send.
+    """
+
     def set_limits_in_config(config):
-        if min_bits_per_sample is not _UNDEF:
+        if min_bits_per_sample is not cv.UNDEFINED:
             config[CONF_MIN_BITS_PER_SAMPLE] = min_bits_per_sample
-        if max_bits_per_sample is not _UNDEF:
+        if max_bits_per_sample is not cv.UNDEFINED:
             config[CONF_MAX_BITS_PER_SAMPLE] = max_bits_per_sample
-        if min_channels is not _UNDEF:
+        if min_channels is not cv.UNDEFINED:
             config[CONF_MIN_CHANNELS] = min_channels
-        if max_channels is not _UNDEF:
+        if max_channels is not cv.UNDEFINED:
             config[CONF_MAX_CHANNELS] = max_channels
-        if min_sample_rate is not _UNDEF:
+        if min_sample_rate is not cv.UNDEFINED:
             config[CONF_MIN_SAMPLE_RATE] = min_sample_rate
-        if max_sample_rate is not _UNDEF:
+        if max_sample_rate is not cv.UNDEFINED:
             config[CONF_MAX_SAMPLE_RATE] = max_sample_rate
 
     return set_limits_in_config
@@ -69,43 +72,87 @@ def final_validate_audio_schema(
     name: str,
     *,
     audio_device: str,
-    bits_per_sample: int,
-    channels: int,
-    sample_rate: int,
+    bits_per_sample: int = cv.UNDEFINED,
+    channels: int = cv.UNDEFINED,
+    sample_rate: int = cv.UNDEFINED,
+    enabled_channels: list[int] = cv.UNDEFINED,
+    audio_device_issue: bool = False,
 ):
+    """Validates audio compatibility when passed between different components.
+
+    The component derived from ``AUDIO_COMPONENT_SCHEMA`` should call ``set_stream_limits`` in a validator to specify its compatible settings
+
+      - If audio_device_issue is True, then the error message indicates the user should adjust the AUDIO_COMPONENT_SCHEMA derived component's configuration to match the values passed to this function
+      - If audio_device_issue is False, then the error message indicates the user should adjust the configuration of the component calling this function, as it falls out of the valid stream limits
+
+    Args:
+        name (str): Friendly name of the component calling this function with an audio component to validate
+        audio_device (str): The configuration parameter name that contains the ID of an AUDIO_COMPONENT_SCHEMA derived component to validate against
+        bits_per_sample (int, optional): The desired bits per sample
+        channels (int, optional): The desired number of channels
+        sample_rate (int, optional): The desired sample rate
+        enabled_channels (list[int], optional): The desired enabled channels
+        audio_device_issue (bool, optional): Format the error message to indicate the problem is in the configuration for the ``audio_device`` component. Defaults to False.
+    """
+
     def validate_audio_compatiblity(audio_config):
         audio_schema = {}
 
-        try:
-            cv.int_range(
-                min=audio_config.get(CONF_MIN_BITS_PER_SAMPLE),
-                max=audio_config.get(CONF_MAX_BITS_PER_SAMPLE),
-            )(bits_per_sample)
-        except cv.Invalid as exc:
-            raise cv.Invalid(
-                f"Invalid configuration for the {name} component. The {CONF_BITS_PER_SAMPLE} {str(exc)}"
-            ) from exc
-
-        try:
-            cv.int_range(
-                min=audio_config.get(CONF_MIN_CHANNELS),
-                max=audio_config.get(CONF_MAX_CHANNELS),
-            )(channels)
-        except cv.Invalid as exc:
-            raise cv.Invalid(
-                f"Invalid configuration for the {name} component. The {CONF_NUM_CHANNELS} {str(exc)}"
-            ) from exc
-
-        try:
-            cv.int_range(
-                min=audio_config.get(CONF_MIN_SAMPLE_RATE),
-                max=audio_config.get(CONF_MAX_SAMPLE_RATE),
-            )(sample_rate)
-            return cv.Schema(audio_schema, extra=cv.ALLOW_EXTRA)(audio_config)
-        except cv.Invalid as exc:
-            raise cv.Invalid(
-                f"Invalid configuration for the {name} component. The {CONF_SAMPLE_RATE} {str(exc)}"
-            ) from exc
+        if bits_per_sample is not cv.UNDEFINED:
+            try:
+                cv.int_range(
+                    min=audio_config.get(CONF_MIN_BITS_PER_SAMPLE),
+                    max=audio_config.get(CONF_MAX_BITS_PER_SAMPLE),
+                )(bits_per_sample)
+            except cv.Invalid as exc:
+                if audio_device_issue:
+                    error_string = f"Invalid configuration for the specified {audio_device}. The {name} component requires {bits_per_sample} bits per sample."
+                else:
+                    error_string = f"Invalid configuration for the {name} component. The {CONF_BITS_PER_SAMPLE} {str(exc)}"
+                raise cv.Invalid(error_string) from exc
+
+        if channels is not cv.UNDEFINED:
+            try:
+                cv.int_range(
+                    min=audio_config.get(CONF_MIN_CHANNELS),
+                    max=audio_config.get(CONF_MAX_CHANNELS),
+                )(channels)
+            except cv.Invalid as exc:
+                if audio_device_issue:
+                    error_string = f"Invalid configuration for the specified {audio_device}. The {name} component requires {channels} channels."
+                else:
+                    error_string = f"Invalid configuration for the {name} component. The {CONF_NUM_CHANNELS} {str(exc)}"
+                raise cv.Invalid(error_string) from exc
+
+        if sample_rate is not cv.UNDEFINED:
+            try:
+                cv.int_range(
+                    min=audio_config.get(CONF_MIN_SAMPLE_RATE),
+                    max=audio_config.get(CONF_MAX_SAMPLE_RATE),
+                )(sample_rate)
+            except cv.Invalid as exc:
+                if audio_device_issue:
+                    error_string = f"Invalid configuration for the specified {audio_device}. The {name} component requires a {sample_rate} sample rate."
+                else:
+                    error_string = f"Invalid configuration for the {name} component. The {CONF_SAMPLE_RATE} {str(exc)}"
+                raise cv.Invalid(error_string) from exc
+
+        if enabled_channels is not cv.UNDEFINED:
+            for channel in enabled_channels:
+                try:
+                    # Channels are 0-indexed
+                    cv.int_range(
+                        min=0,
+                        max=audio_config.get(CONF_MAX_CHANNELS) - 1,
+                    )(channel)
+                except cv.Invalid as exc:
+                    if audio_device_issue:
+                        error_string = f"Invalid configuration for the specified {audio_device}. The {name} component requires channel {channel}."
+                    else:
+                        error_string = f"Invalid configuration for the {name} component. Enabled channel {channel} {str(exc)}"
+                    raise cv.Invalid(error_string) from exc
+
+        return cv.Schema(audio_schema, extra=cv.ALLOW_EXTRA)(audio_config)
 
     return cv.Schema(
         {
@@ -118,4 +165,4 @@ def final_validate_audio_schema(
 
 
 async def to_code(config):
-    cg.add_library("esphome/esp-audio-libs", "1.1.3")
+    cg.add_library("esphome/esp-audio-libs", "1.1.4")

esphome/components/audio/audio.h

@@ -135,5 +135,53 @@ const char *audio_file_type_to_string(AudioFileType file_type);
 void scale_audio_samples(const int16_t *audio_samples, int16_t *output_buffer, int16_t scale_factor,
                          size_t samples_to_scale);
 
+/// @brief Unpacks a quantized audio sample into a Q31 fixed-point number.
+/// @param data Pointer to uint8_t array containing the audio sample
+/// @param bytes_per_sample The number of bytes per sample
+/// @return Q31 sample
+inline int32_t unpack_audio_sample_to_q31(const uint8_t *data, size_t bytes_per_sample) {
+  int32_t sample = 0;
+  if (bytes_per_sample == 1) {
+    sample |= data[0] << 24;
+  } else if (bytes_per_sample == 2) {
+    sample |= data[0] << 16;
+    sample |= data[1] << 24;
+  } else if (bytes_per_sample == 3) {
+    sample |= data[0] << 8;
+    sample |= data[1] << 16;
+    sample |= data[2] << 24;
+  } else if (bytes_per_sample == 4) {
+    sample |= data[0];
+    sample |= data[1] << 8;
+    sample |= data[2] << 16;
+    sample |= data[3] << 24;
+  }
+
+  return sample;
+}
+
+/// @brief Packs a Q31 fixed-point number as an audio sample with the specified number of bytes per sample.
+/// Packs the most significant bits - no dithering is applied.
+/// @param sample Q31 fixed-point number to pack
+/// @param data Pointer to data array to store
+/// @param bytes_per_sample The audio data's bytes per sample
+inline void pack_q31_as_audio_sample(int32_t sample, uint8_t *data, size_t bytes_per_sample) {
+  if (bytes_per_sample == 1) {
+    data[0] = static_cast<uint8_t>(sample >> 24);
+  } else if (bytes_per_sample == 2) {
+    data[0] = static_cast<uint8_t>(sample >> 16);
+    data[1] = static_cast<uint8_t>(sample >> 24);
+  } else if (bytes_per_sample == 3) {
+    data[0] = static_cast<uint8_t>(sample >> 8);
+    data[1] = static_cast<uint8_t>(sample >> 16);
+    data[2] = static_cast<uint8_t>(sample >> 24);
+  } else if (bytes_per_sample == 4) {
+    data[0] = static_cast<uint8_t>(sample);
+    data[1] = static_cast<uint8_t>(sample >> 8);
+    data[2] = static_cast<uint8_t>(sample >> 16);
+    data[3] = static_cast<uint8_t>(sample >> 24);
+  }
+}
+
 }  // namespace audio
 }  // namespace esphome

esphome/components/audio/audio_decoder.cpp

@@ -171,7 +171,7 @@ AudioDecoderState AudioDecoder::decode(bool stop_gracefully) {
 
     bytes_available_before_processing = this->input_transfer_buffer_->available();
 
-    if ((this->potentially_failed_count_ > 10) && (bytes_read == 0)) {
+    if ((this->potentially_failed_count_ > 0) && (bytes_read == 0)) {
       // Failed to decode in last attempt and there is no new data
 
       if ((this->input_transfer_buffer_->free() == 0) && first_loop_iteration) {

esphome/components/audio/audio_resampler.cpp

@@ -4,6 +4,8 @@
 
 #include "esphome/core/hal.h"
 
+#include <cstring>
+
 namespace esphome {
 namespace audio {
 

esphome/components/audio/audio_resampler.h

@@ -6,6 +6,7 @@
 #include "audio_transfer_buffer.h"
 
 #include "esphome/core/defines.h"
+#include "esphome/core/helpers.h"
 #include "esphome/core/ring_buffer.h"
 
 #ifdef USE_SPEAKER

esphome/components/ballu/climate.py

@@ -1,7 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import climate_ir
-import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 AUTO_LOAD = ["climate_ir"]
 CODEOWNERS = ["@bazuchan"]
@@ -9,13 +7,8 @@ CODEOWNERS = ["@bazuchan"]
 ballu_ns = cg.esphome_ns.namespace("ballu")
 BalluClimate = ballu_ns.class_("BalluClimate", climate_ir.ClimateIR)
 
-CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(BalluClimate),
-    }
-)
+CONFIG_SCHEMA = climate_ir.climate_ir_with_receiver_schema(BalluClimate)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await climate_ir.register_climate_ir(var, config)
+    await climate_ir.new_climate_ir(config)

esphome/components/bang_bang/climate.py

@@ -9,7 +9,6 @@ from esphome.const import (
     CONF_DEFAULT_TARGET_TEMPERATURE_LOW,
     CONF_HEAT_ACTION,
     CONF_HUMIDITY_SENSOR,
-    CONF_ID,
     CONF_IDLE_ACTION,
     CONF_SENSOR,
 )
@@ -19,9 +18,9 @@ BangBangClimate = bang_bang_ns.class_("BangBangClimate", climate.Climate, cg.Com
 BangBangClimateTargetTempConfig = bang_bang_ns.struct("BangBangClimateTargetTempConfig")
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(BangBangClimate)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(BangBangClimate),
             cv.Required(CONF_SENSOR): cv.use_id(sensor.Sensor),
             cv.Optional(CONF_HUMIDITY_SENSOR): cv.use_id(sensor.Sensor),
             cv.Required(CONF_DEFAULT_TARGET_TEMPERATURE_LOW): cv.temperature,
@@ -36,15 +35,15 @@ CONFIG_SCHEMA = cv.All(
                 }
             ),
         }
-    ).extend(cv.COMPONENT_SCHEMA),
+    )
+    .extend(cv.COMPONENT_SCHEMA),
     cv.has_at_least_one_key(CONF_COOL_ACTION, CONF_HEAT_ACTION),
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
 
     sens = await cg.get_variable(config[CONF_SENSOR])
     cg.add(var.set_sensor(sens))

esphome/components/bedjet/bedjet_hub.cpp

@@ -3,6 +3,7 @@
 #include "bedjet_hub.h"
 #include "bedjet_child.h"
 #include "bedjet_const.h"
+#include "esphome/core/application.h"
 #include <cinttypes>
 
 namespace esphome {

esphome/components/bedjet/climate/__init__.py

@@ -1,11 +1,8 @@
-import logging
-
 import esphome.codegen as cg
 from esphome.components import ble_client, climate
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_HEAT_MODE,
-    CONF_ID,
     CONF_RECEIVE_TIMEOUT,
     CONF_TEMPERATURE_SOURCE,
     CONF_TIME_ID,
@@ -13,7 +10,6 @@ from esphome.const import (
 
 from .. import BEDJET_CLIENT_SCHEMA, bedjet_ns, register_bedjet_child
 
-_LOGGER = logging.getLogger(__name__)
 CODEOWNERS = ["@jhansche"]
 DEPENDENCIES = ["bedjet"]
 
@@ -30,9 +26,9 @@ BEDJET_TEMPERATURE_SOURCES = {
 }
 
 CONFIG_SCHEMA = (
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(BedJetClimate)
+    .extend(
         {
-            cv.GenerateID(): cv.declare_id(BedJetClimate),
             cv.Optional(CONF_HEAT_MODE, default="heat"): cv.enum(
                 BEDJET_HEAT_MODES, lower=True
             ),
@@ -63,9 +59,8 @@ CONFIG_SCHEMA = (
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await climate.new_climate(config)
     await cg.register_component(var, config)
-    await climate.register_climate(var, config)
     await register_bedjet_child(var, config)
 
     cg.add(var.set_heating_mode(config[CONF_HEAT_MODE]))

esphome/components/bedjet/fan/__init__.py

@@ -1,31 +1,22 @@
-import logging
-
 import esphome.codegen as cg
 from esphome.components import fan
 import esphome.config_validation as cv
-from esphome.const import CONF_ID
 
 from .. import BEDJET_CLIENT_SCHEMA, bedjet_ns, register_bedjet_child
 
-_LOGGER = logging.getLogger(__name__)
 CODEOWNERS = ["@jhansche"]
 DEPENDENCIES = ["bedjet"]
 
 BedJetFan = bedjet_ns.class_("BedJetFan", fan.Fan, cg.PollingComponent)
 
 CONFIG_SCHEMA = (
-    fan.FAN_SCHEMA.extend(
-        {
-            cv.GenerateID(): cv.declare_id(BedJetFan),
-        }
-    )
+    fan.fan_schema(BedJetFan)
     .extend(cv.polling_component_schema("60s"))
     .extend(BEDJET_CLIENT_SCHEMA)
 )
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
+    var = await fan.new_fan(config)
     await cg.register_component(var, config)
-    await fan.register_fan(var, config)
     await register_bedjet_child(var, config)

esphome/components/binary/fan/__init__.py

@@ -1,31 +1,28 @@
 import esphome.codegen as cg
 from esphome.components import fan, output
 import esphome.config_validation as cv
-from esphome.const import (
-    CONF_DIRECTION_OUTPUT,
-    CONF_OSCILLATION_OUTPUT,
-    CONF_OUTPUT,
-    CONF_OUTPUT_ID,
-)
+from esphome.const import CONF_DIRECTION_OUTPUT, CONF_OSCILLATION_OUTPUT, CONF_OUTPUT
 
 from .. import binary_ns
 
 BinaryFan = binary_ns.class_("BinaryFan", fan.Fan, cg.Component)
 
-CONFIG_SCHEMA = fan.FAN_SCHEMA.extend(
-    {
-        cv.GenerateID(CONF_OUTPUT_ID): cv.declare_id(BinaryFan),
-        cv.Required(CONF_OUTPUT): cv.use_id(output.BinaryOutput),
-        cv.Optional(CONF_DIRECTION_OUTPUT): cv.use_id(output.BinaryOutput),
-        cv.Optional(CONF_OSCILLATION_OUTPUT): cv.use_id(output.BinaryOutput),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = (
+    fan.fan_schema(BinaryFan)
+    .extend(
+        {
+            cv.Required(CONF_OUTPUT): cv.use_id(output.BinaryOutput),
+            cv.Optional(CONF_DIRECTION_OUTPUT): cv.use_id(output.BinaryOutput),
+            cv.Optional(CONF_OSCILLATION_OUTPUT): cv.use_id(output.BinaryOutput),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+)
 
 
 async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_OUTPUT_ID])
+    var = await fan.new_fan(config)
     await cg.register_component(var, config)
-    await fan.register_fan(var, config)
 
     output_ = await cg.get_variable(config[CONF_OUTPUT])
     cg.add(var.set_output(output_))

esphome/components/binary_sensor/__init__.py

@@ -386,7 +386,7 @@ def validate_click_timing(value):
     return value
 
 
-BINARY_SENSOR_SCHEMA = (
+_BINARY_SENSOR_SCHEMA = (
     cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
     .extend(cv.MQTT_COMPONENT_SCHEMA)
     .extend(
@@ -458,19 +458,17 @@ BINARY_SENSOR_SCHEMA = (
     )
 )
 
-_UNDEF = object()
-
 
 def binary_sensor_schema(
-    class_: MockObjClass = _UNDEF,
+    class_: MockObjClass = cv.UNDEFINED,
     *,
-    icon: str = _UNDEF,
-    entity_category: str = _UNDEF,
-    device_class: str = _UNDEF,
+    icon: str = cv.UNDEFINED,
+    entity_category: str = cv.UNDEFINED,
+    device_class: str = cv.UNDEFINED,
 ) -> cv.Schema:
     schema = {}
 
-    if class_ is not _UNDEF:
+    if class_ is not cv.UNDEFINED:
         # Not cv.optional
         schema[cv.GenerateID()] = cv.declare_id(class_)
 
@@ -479,10 +477,15 @@ def binary_sensor_schema(
         (CONF_ENTITY_CATEGORY, entity_category, cv.entity_category),
         (CONF_DEVICE_CLASS, device_class, validate_device_class),
     ]:
-        if default is not _UNDEF:
+        if default is not cv.UNDEFINED:
             schema[cv.Optional(key, default=default)] = validator
 
-    return BINARY_SENSOR_SCHEMA.extend(schema)
+    return _BINARY_SENSOR_SCHEMA.extend(schema)
+
+
+# Remove before 2025.11.0
+BINARY_SENSOR_SCHEMA = binary_sensor_schema()
+BINARY_SENSOR_SCHEMA.add_extra(cv.deprecated_schema_constant("binary_sensor"))
 
 
 async def setup_binary_sensor_core_(var, config):