esphome 2024.10.2__py3-none-any.whl → 2024.11.0__py3-none-any.whl

esphome/components/ssd1306_spi/display.py

@@ -1,8 +1,8 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import spi, ssd1306_base
 from esphome.components.ssd1306_base import _validate
+import esphome.config_validation as cv
 from esphome.const import CONF_DC_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 AUTO_LOAD = ["ssd1306_base"]
@@ -24,6 +24,10 @@ CONFIG_SCHEMA = cv.All(
     _validate,
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "ssd1306_spi", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/ssd1322_spi/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import spi, ssd1322_base
+import esphome.config_validation as cv
 from esphome.const import CONF_DC_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@kbx81"]
@@ -24,6 +24,10 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "ssd1322_spi", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/ssd1325_spi/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import spi, ssd1325_base
+import esphome.config_validation as cv
 from esphome.const import CONF_DC_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@kbx81"]
@@ -24,6 +24,10 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "ssd1325_spi", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/ssd1327_spi/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import spi, ssd1327_base
+import esphome.config_validation as cv
 from esphome.const import CONF_DC_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@kbx81"]
@@ -24,6 +24,10 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "ssd1327_spi", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/ssd1331_spi/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import spi, ssd1331_base
+import esphome.config_validation as cv
 from esphome.const import CONF_DC_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@kbx81"]
@@ -24,6 +24,10 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "ssd1331_spi", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/ssd1351_spi/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import spi, ssd1351_base
+import esphome.config_validation as cv
 from esphome.const import CONF_DC_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@kbx81"]
@@ -24,6 +24,10 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "ssd1351_spi", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/st7567_spi/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import spi, st7567_base
+import esphome.config_validation as cv
 from esphome.const import CONF_DC_PIN, CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@latonita"]
@@ -24,6 +24,10 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "st7567_spi", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/st7701s/display.py

@@ -18,6 +18,7 @@ from esphome.const import (
     CONF_HSYNC_PIN,
     CONF_ID,
     CONF_IGNORE_STRAPPING_WARNING,
+    CONF_INIT_SEQUENCE,
     CONF_INVERT_COLORS,
     CONF_LAMBDA,
     CONF_MIRROR_X,
@@ -35,7 +36,6 @@ from esphome.core import TimePeriod
 
 from .init_sequences import ST7701S_INITS, cmd
 
-CONF_INIT_SEQUENCE = "init_sequence"
 CONF_DE_PIN = "de_pin"
 CONF_PCLK_PIN = "pclk_pin"
 
@@ -167,6 +167,10 @@ CONFIG_SCHEMA = cv.All(
     cv.only_with_esp_idf,
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "st7701s", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/st7735/display.py

@@ -1,17 +1,17 @@
+from esphome import pins
 import esphome.codegen as cg
+from esphome.components import display, spi
 import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import spi
-from esphome.components import display
 from esphome.const import (
     CONF_DC_PIN,
     CONF_ID,
+    CONF_INVERT_COLORS,
     CONF_LAMBDA,
     CONF_MODEL,
-    CONF_RESET_PIN,
     CONF_PAGES,
-    CONF_INVERT_COLORS,
+    CONF_RESET_PIN,
 )
+
 from . import st7735_ns
 
 CODEOWNERS = ["@SenexCrenshaw"]
@@ -68,6 +68,11 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "st7735", require_miso=False, require_mosi=True
+)
+
+
 async def setup_st7735(var, config):
     await display.register_display(var, config)
 

esphome/components/st7789v/display.py

@@ -1,22 +1,23 @@
+from esphome import pins
 import esphome.codegen as cg
+from esphome.components import display, power_supply, spi
 import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import display, spi, power_supply
 from esphome.const import (
     CONF_BACKLIGHT_PIN,
+    CONF_CS_PIN,
     CONF_DC_PIN,
     CONF_HEIGHT,
     CONF_ID,
     CONF_LAMBDA,
     CONF_MODEL,
-    CONF_RESET_PIN,
-    CONF_WIDTH,
-    CONF_POWER_SUPPLY,
-    CONF_ROTATION,
-    CONF_CS_PIN,
     CONF_OFFSET_HEIGHT,
     CONF_OFFSET_WIDTH,
+    CONF_POWER_SUPPLY,
+    CONF_RESET_PIN,
+    CONF_ROTATION,
+    CONF_WIDTH,
 )
+
 from . import st7789v_ns
 
 CONF_EIGHTBITCOLOR = "eightbitcolor"
@@ -168,6 +169,10 @@ CONFIG_SCHEMA = cv.All(
     validate_st7789v,
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "st7789v", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])

esphome/components/statsd/statsd.cpp

@@ -2,6 +2,7 @@
 
 #include "statsd.h"
 
+#ifdef USE_NETWORK
 namespace esphome {
 namespace statsd {
 
@@ -154,3 +155,4 @@ void StatsdComponent::send_(std::string *out) {
 
 }  // namespace statsd
 }  // namespace esphome
+#endif

esphome/components/statsd/statsd.h

@@ -3,6 +3,7 @@
 #include <vector>
 
 #include "esphome/core/defines.h"
+#ifdef USE_NETWORK
 #include "esphome/core/component.h"
 #include "esphome/components/socket/socket.h"
 #include "esphome/components/network/ip_address.h"
@@ -84,3 +85,4 @@ class StatsdComponent : public PollingComponent {
 
 }  // namespace statsd
 }  // namespace esphome
+#endif

esphome/components/sun/sun.h

@@ -59,6 +59,9 @@ class Sun {
   void set_latitude(double latitude) { location_.latitude = latitude; }
   void set_longitude(double longitude) { location_.longitude = longitude; }
 
+  // Check if the sun is above the horizon, with a default elevation angle of -0.83333 (standard for sunrise/set).
+  bool is_above_horizon(double elevation = -0.83333) { return this->elevation() > elevation; }
+
   optional<ESPTime> sunrise(double elevation);
   optional<ESPTime> sunset(double elevation);
   optional<ESPTime> sunrise(ESPTime date, double elevation);

esphome/components/tc74/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@sethgirvan"]

esphome/components/tc74/sensor.py

@@ -0,0 +1,32 @@
+import esphome.codegen as cg
+from esphome.components import i2c, sensor
+import esphome.config_validation as cv
+from esphome.const import (
+    DEVICE_CLASS_TEMPERATURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+)
+
+CODEOWNERS = ["@sethgirvan"]
+DEPENDENCIES = ["i2c"]
+
+tc74_ns = cg.esphome_ns.namespace("tc74")
+TC74Component = tc74_ns.class_("TC74Component", cg.PollingComponent, i2c.I2CDevice)
+
+CONFIG_SCHEMA = (
+    sensor.sensor_schema(
+        TC74Component,
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=1,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+    )
+    .extend(cv.polling_component_schema("60s"))
+    .extend(i2c.i2c_device_schema(0x48))
+)
+
+
+async def to_code(config):
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)

esphome/components/tc74/tc74.cpp

@@ -0,0 +1,68 @@
+// Based on the TC74 datasheet https://ww1.microchip.com/downloads/en/DeviceDoc/21462D.pdf
+
+#include "tc74.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace tc74 {
+
+static const char *const TAG = "tc74";
+
+static const uint8_t TC74_REGISTER_TEMPERATURE = 0x00;
+static const uint8_t TC74_REGISTER_CONFIGURATION = 0x01;
+static const uint8_t TC74_DATA_READY_MASK = 0x40;
+
+// It is possible the "Data Ready" bit will not be set if the TC74 has not been powered on for at least 250ms, so it not
+// being set does not constitute a failure.
+void TC74Component::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up TC74...");
+  uint8_t config_reg;
+  if (this->read_register(TC74_REGISTER_CONFIGURATION, &config_reg, 1) != i2c::ERROR_OK) {
+    this->mark_failed();
+    return;
+  }
+  this->data_ready_ = config_reg & TC74_DATA_READY_MASK;
+}
+
+void TC74Component::update() { this->read_temperature_(); }
+
+void TC74Component::dump_config() {
+  LOG_SENSOR("", "TC74", this);
+  LOG_I2C_DEVICE(this);
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Connection with TC74 failed!");
+  }
+  LOG_UPDATE_INTERVAL(this);
+}
+
+void TC74Component::read_temperature_() {
+  if (!this->data_ready_) {
+    uint8_t config_reg;
+    if (this->read_register(TC74_REGISTER_CONFIGURATION, &config_reg, 1) != i2c::ERROR_OK) {
+      this->status_set_warning();
+      return;
+    }
+
+    if (config_reg & TC74_DATA_READY_MASK) {
+      this->data_ready_ = true;
+    } else {
+      ESP_LOGD(TAG, "TC74 not ready");
+      return;
+    }
+  }
+
+  uint8_t temperature_reg;
+  if (this->read_register(TC74_REGISTER_TEMPERATURE, &temperature_reg, 1) != i2c::ERROR_OK) {
+    this->status_set_warning();
+    return;
+  }
+
+  ESP_LOGD(TAG, "Got Temperature=%d °C", temperature_reg);
+  this->publish_state(temperature_reg);
+  this->status_clear_warning();
+}
+
+float TC74Component::get_setup_priority() const { return setup_priority::DATA; }
+
+}  // namespace tc74
+}  // namespace esphome

esphome/components/tc74/tc74.h

@@ -0,0 +1,28 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/i2c/i2c.h"
+
+namespace esphome {
+namespace tc74 {
+
+class TC74Component : public PollingComponent, public i2c::I2CDevice, public sensor::Sensor {
+ public:
+  /// Setup the sensor and check connection.
+  void setup() override;
+  void dump_config() override;
+  /// Update the sensor value (temperature).
+  void update() override;
+
+  float get_setup_priority() const override;
+
+ protected:
+  /// Internal method to read the temperature from the component after it has been scheduled.
+  void read_temperature_();
+
+  bool data_ready_ = false;
+};
+
+}  // namespace tc74
+}  // namespace esphome

esphome/components/touchscreen/__init__.py

@@ -1,21 +1,18 @@
-import esphome.config_validation as cv
+from esphome import automation
 import esphome.codegen as cg
-
 from esphome.components import display
-from esphome import automation
-
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_CALIBRATION,
     CONF_DISPLAY,
-    CONF_ON_TOUCH,
+    CONF_MIRROR_X,
+    CONF_MIRROR_Y,
     CONF_ON_RELEASE,
+    CONF_ON_TOUCH,
     CONF_ON_UPDATE,
     CONF_SWAP_XY,
-    CONF_MIRROR_X,
-    CONF_MIRROR_Y,
     CONF_TRANSFORM,
-    CONF_CALIBRATION,
 )
-
 from esphome.core import coroutine_with_priority
 
 CODEOWNERS = ["@jesserockz", "@nielsnl68"]
@@ -43,51 +40,45 @@ CONF_Y_MIN = "y_min"
 CONF_Y_MAX = "y_max"
 
 
-def validate_calibration(config):
-    if CONF_CALIBRATION in config:
-        calibration_config = config[CONF_CALIBRATION]
-        if (
-            cv.int_([CONF_X_MIN]) != 0
-            and cv.int_(calibration_config[CONF_X_MAX]) != 0
-            and abs(
-                cv.int_(calibration_config[CONF_X_MIN])
-                - cv.int_(calibration_config[CONF_X_MAX])
-            )
-            < 10
-        ):
-            raise cv.Invalid("Calibration X values difference must be more than 10")
-
-        if (
-            cv.int_(calibration_config[CONF_Y_MIN]) != 0
-            and cv.int_(calibration_config[CONF_Y_MAX]) != 0
-            and abs(
-                cv.int_(calibration_config[CONF_Y_MIN])
-                - cv.int_(calibration_config[CONF_Y_MAX])
-            )
-            < 10
-        ):
-            raise cv.Invalid("Calibration Y values difference must be more than 10")
-
-    return config
+def validate_calibration(calibration_config):
+    x_min = calibration_config[CONF_X_MIN]
+    x_max = calibration_config[CONF_X_MAX]
+    y_min = calibration_config[CONF_Y_MIN]
+    y_max = calibration_config[CONF_Y_MAX]
+    if x_max < x_min:
+        raise cv.Invalid(
+            "x_min must be smaller than x_max. To mirror the direction use the 'transform' options"
+        )
+    if y_max < y_min:
+        raise cv.Invalid(
+            "y_min must be smaller than y_max. To mirror the direction use the 'transform' options"
+        )
+    x_delta = x_max - x_min
+    y_delta = y_max - y_min
+    if x_delta < 10 or y_delta < 10:
+        raise cv.Invalid("Calibration value range must be greater than 10")
+    return calibration_config
 
 
-def calibration_schema(default_max_values):
-    return cv.Schema(
+CALIBRATION_SCHEMA = cv.All(
+    cv.Schema(
         {
-            cv.Optional(CONF_X_MIN, default=0): cv.int_range(min=0, max=4095),
-            cv.Optional(CONF_X_MAX, default=default_max_values): cv.int_range(
-                min=0, max=4095
-            ),
-            cv.Optional(CONF_Y_MIN, default=0): cv.int_range(min=0, max=4095),
-            cv.Optional(CONF_Y_MAX, default=default_max_values): cv.int_range(
-                min=0, max=4095
-            ),
-        },
-        validate_calibration,
-    )
+            cv.Required(CONF_X_MIN): cv.int_range(min=0, max=4095),
+            cv.Required(CONF_X_MAX): cv.int_range(min=0, max=4095),
+            cv.Required(CONF_Y_MIN): cv.int_range(min=0, max=4095),
+            cv.Required(CONF_Y_MAX): cv.int_range(min=0, max=4095),
+        }
+    ),
+    validate_calibration,
+)
 
 
-def touchscreen_schema(default_touch_timeout):
+def touchscreen_schema(default_touch_timeout=cv.UNDEFINED, calibration_required=False):
+    calibration = (
+        cv.Required(CONF_CALIBRATION)
+        if calibration_required
+        else cv.Optional(CONF_CALIBRATION)
+    )
     return cv.Schema(
         {
             cv.GenerateID(CONF_DISPLAY): cv.use_id(display.Display),
@@ -102,7 +93,7 @@ def touchscreen_schema(default_touch_timeout):
                 cv.positive_time_period_milliseconds,
                 cv.Range(max=cv.TimePeriod(milliseconds=65535)),
             ),
-            cv.Optional(CONF_CALIBRATION): calibration_schema(0),
+            calibration: CALIBRATION_SCHEMA,
             cv.Optional(CONF_ON_TOUCH): automation.validate_automation(single=True),
             cv.Optional(CONF_ON_UPDATE): automation.validate_automation(single=True),
             cv.Optional(CONF_ON_RELEASE): automation.validate_automation(single=True),

esphome/components/touchscreen/touchscreen.h

@@ -53,14 +53,10 @@ class Touchscreen : public PollingComponent {
   void set_swap_xy(bool swap) { this->swap_x_y_ = swap; }
 
   void set_calibration(int16_t x_min, int16_t x_max, int16_t y_min, int16_t y_max) {
-    this->x_raw_min_ = std::min(x_min, x_max);
-    this->x_raw_max_ = std::max(x_min, x_max);
-    this->y_raw_min_ = std::min(y_min, y_max);
-    this->y_raw_max_ = std::max(y_min, y_max);
-    if (x_min > x_max)
-      this->invert_x_ = true;
-    if (y_min > y_max)
-      this->invert_y_ = true;
+    this->x_raw_min_ = x_min;
+    this->x_raw_max_ = x_max;
+    this->y_raw_min_ = y_min;
+    this->y_raw_max_ = y_max;
   }
 
   Trigger<TouchPoint, const TouchPoints_t &> *get_touch_trigger() { return &this->touch_trigger_; }

esphome/components/tuya/fan/tuya_fan.cpp

@@ -86,7 +86,7 @@ void TuyaFan::control(const fan::FanCall &call) {
   if (this->oscillation_id_.has_value() && call.get_oscillating().has_value()) {
     if (this->oscillation_type_ == TuyaDatapointType::ENUM) {
       this->parent_->set_enum_datapoint_value(*this->oscillation_id_, *call.get_oscillating());
-    } else if (this->speed_type_ == TuyaDatapointType::BOOLEAN) {
+    } else if (this->oscillation_type_ == TuyaDatapointType::BOOLEAN) {
       this->parent_->set_boolean_datapoint_value(*this->oscillation_id_, *call.get_oscillating());
     }
   }

esphome/components/udp/udp_component.cpp

@@ -261,7 +261,8 @@ void UDPComponent::setup() {
       return;
     }
   }
-#else
+#endif
+#ifdef USE_SOCKET_IMPL_LWIP_TCP
   // 8266 and RP2040 `Duino
   for (const auto &address : this->addresses_) {
     auto ipaddr = IPAddress();
@@ -370,7 +371,8 @@ void UDPComponent::loop() {
     for (;;) {
 #if defined(USE_SOCKET_IMPL_BSD_SOCKETS) || defined(USE_SOCKET_IMPL_LWIP_SOCKETS)
       auto len = this->listen_socket_->read(buf, sizeof(buf));
-#else
+#endif
+#ifdef USE_SOCKET_IMPL_LWIP_TCP
       auto len = this->udp_client_.parsePacket();
       if (len > 0)
         len = this->udp_client_.read(buf, sizeof(buf));
@@ -587,7 +589,8 @@ void UDPComponent::send_packet_(void *data, size_t len) {
     if (result < 0)
       ESP_LOGW(TAG, "sendto() error %d", errno);
   }
-#else
+#endif
+#ifdef USE_SOCKET_IMPL_LWIP_TCP
   auto iface = IPAddress(0, 0, 0, 0);
   for (const auto &saddr : this->ipaddrs_) {
     if (this->udp_client_.beginPacketMulticast(saddr, this->port_, iface, 128) != 0) {

esphome/components/udp/udp_component.h

@@ -9,7 +9,8 @@
 #endif
 #if defined(USE_SOCKET_IMPL_BSD_SOCKETS) || defined(USE_SOCKET_IMPL_LWIP_SOCKETS)
 #include "esphome/components/socket/socket.h"
-#else
+#endif
+#ifdef USE_SOCKET_IMPL_LWIP_TCP
 #include <WiFiUdp.h>
 #endif
 #include <vector>
@@ -125,7 +126,8 @@ class UDPComponent : public PollingComponent {
   std::unique_ptr<socket::Socket> broadcast_socket_ = nullptr;
   std::unique_ptr<socket::Socket> listen_socket_ = nullptr;
   std::vector<struct sockaddr> sockaddrs_{};
-#else
+#endif
+#ifdef USE_SOCKET_IMPL_LWIP_TCP
   std::vector<IPAddress> ipaddrs_{};
   WiFiUDP udp_client_{};
 #endif

esphome/components/waveshare_epaper/display.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import core, pins
+import esphome.codegen as cg
 from esphome.components import display, spi
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BUSY_PIN,
     CONF_DC_PIN,
@@ -187,6 +187,10 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_most_one_key(CONF_PAGES, CONF_LAMBDA),
 )
 
+FINAL_VALIDATE_SCHEMA = spi.final_validate_device_schema(
+    "waveshare_epaper", require_miso=False, require_mosi=True
+)
+
 
 async def to_code(config):
     model_type, model = MODELS[config[CONF_MODEL]]