cuda-cccl 0.4.3__cp312-cp312-manylinux_2_26_x86_64.whl

cuda/cccl/headers/include/thrust/reduce.h

@@ -0,0 +1,1114 @@
+/*
+ *  Copyright 2008-2013 NVIDIA Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ */
+
+/*! \file thrust/reduce.h
+ *  \brief Functions for reducing a range to a single value
+ */
+
+#pragma once
+
+#include <thrust/detail/config.h>
+
+#if defined(_CCCL_IMPLICIT_SYSTEM_HEADER_GCC)
+#  pragma GCC system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_CLANG)
+#  pragma clang system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_MSVC)
+#  pragma system_header
+#endif // no system header
+#include <thrust/detail/execution_policy.h>
+#include <thrust/iterator/iterator_traits.h>
+
+#include <cuda/std/__utility/pair.h>
+
+THRUST_NAMESPACE_BEGIN
+
+/*! \addtogroup reductions
+ *  \{
+ */
+
+/*! \p reduce is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce uses \c 0 as the initial value of the
+ *  reduction. \p reduce is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative.  If the reduction operator is not commutative
+ *  then \p thrust::reduce should not be used.  Instead, one could use
+ *  \p inclusive_scan (which does not require commutativity) and select the
+ *  last element of the output array.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the sequence.
+ *  \param last The end of the sequence.
+ *  \return The result of the reduction.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p InputIterator's \c value_type. If \c T is \c InputIterator's \c value_type, then <tt>T(0)</tt>
+ * is defined.
+ *
+ *  The following code snippet demonstrates how to use \p reduce to compute
+ *  the sum of a sequence of integers using the \p thrust::host execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *  int data[6] = {1, 0, 2, 2, 1, 3};
+ *  int result = thrust::reduce(thrust::host, data, data + 6);
+ *
+ *  // result == 9
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ */
+template <typename DerivedPolicy, typename InputIterator>
+_CCCL_HOST_DEVICE detail::it_value_t<InputIterator>
+reduce(const thrust::detail::execution_policy_base<DerivedPolicy>& exec, InputIterator first, InputIterator last);
+
+/*! \p reduce is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce uses \c 0 as the initial value of the
+ *  reduction. \p reduce is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative.  If the reduction operator is not commutative
+ *  then \p thrust::reduce should not be used.  Instead, one could use
+ *  \p inclusive_scan (which does not require commutativity) and select the
+ *  last element of the output array.
+ *
+ *  \param first The beginning of the sequence.
+ *  \param last The end of the sequence.
+ *  \return The result of the reduction.
+ *
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p InputIterator's \c value_type. If \c T is \c InputIterator's \c value_type, then <tt>T(0)</tt>
+ * is defined.
+ *
+ *  The following code snippet demonstrates how to use \p reduce to compute
+ *  the sum of a sequence of integers.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  ...
+ *  int data[6] = {1, 0, 2, 2, 1, 3};
+ *  int result = thrust::reduce(data, data + 6);
+ *
+ *  // result == 9
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ */
+template <typename InputIterator>
+detail::it_value_t<InputIterator> reduce(InputIterator first, InputIterator last);
+
+/*! \p reduce is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce uses \p init as the initial value of the
+ *  reduction. \p reduce is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative.  If the reduction operator is not commutative
+ *  then \p thrust::reduce should not be used.  Instead, one could use
+ *  \p inclusive_scan (which does not require commutativity) and select the
+ *  last element of the output array.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param init The initial value.
+ *  \return The result of the reduction.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p T. \tparam T is convertible to \p InputIterator's \c value_type.
+ *
+ *  The following code snippet demonstrates how to use \p reduce to compute
+ *  the sum of a sequence of integers including an initialization value using the \p thrust::host
+ *  execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *  int data[6] = {1, 0, 2, 2, 1, 3};
+ *  int result = thrust::reduce(thrust::host, data, data + 6, 1);
+ *
+ *  // result == 10
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ */
+template <typename DerivedPolicy, typename InputIterator, typename T>
+_CCCL_HOST_DEVICE T reduce(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec, InputIterator first, InputIterator last, T init);
+
+/*! \p reduce is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce uses \p init as the initial value of the
+ *  reduction. \p reduce is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative.  If the reduction operator is not commutative
+ *  then \p thrust::reduce should not be used.  Instead, one could use
+ *  \p inclusive_scan (which does not require commutativity) and select the
+ *  last element of the output array.
+ *
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param init The initial value.
+ *  \return The result of the reduction.
+ *
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p T. \tparam T is convertible to \p InputIterator's \c value_type.
+ *
+ *  The following code snippet demonstrates how to use \p reduce to compute
+ *  the sum of a sequence of integers including an initialization value.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  ...
+ *  int data[6] = {1, 0, 2, 2, 1, 3};
+ *  int result = thrust::reduce(data, data + 6, 1);
+ *
+ *  // result == 10
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ */
+template <typename InputIterator, typename T>
+T reduce(InputIterator first, InputIterator last, T init);
+
+/*! \p reduce is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce uses \p init as the initial value of the
+ *  reduction and \p binary_op as the binary function used for summation. \p reduce
+ *  is similar to the C++ Standard Template Library's <tt>std::accumulate</tt>.
+ *  The primary difference between the two functions is that <tt>std::accumulate</tt>
+ *  guarantees the order of summation, while \p reduce requires associativity of
+ *  \p binary_op to parallelize the reduction.
+ *
+ *  Note that \p reduce also assumes that the binary reduction operator (in this
+ *  case \p binary_op) is commutative.  If the reduction operator is not commutative
+ *  then \p thrust::reduce should not be used.  Instead, one could use
+ *  \p inclusive_scan (which does not require commutativity) and select the
+ *  last element of the output array.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param init The initial value.
+ *  \param binary_op The binary function used to 'sum' values.
+ *  \return The result of the reduction.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator's \c value_type is convertible to \c T.
+ *  \tparam T is a model of <a href="https://en.cppreference.com/w/cpp/named_req/CopyAssignable">Assignable</a>, and is
+ * convertible to \p BinaryFunction's first and second argument type.
+ *  \tparam BinaryFunction The function's return type must be convertible to \p OutputType.
+ *
+ *  The following code snippet demonstrates how to use \p reduce to
+ *  compute the maximum value of a sequence of integers using the \p thrust::host execution policy
+ *  for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/functional.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *  int data[6] = {1, 0, 2, 2, 1, 3};
+ *  int result = thrust::reduce(thrust::host,
+ *                              data, data + 6,
+ *                              -1,
+ *                              ::cuda::maximum<int>());
+ *  // result == 3
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see transform_reduce
+ */
+template <typename DerivedPolicy, typename InputIterator, typename T, typename BinaryFunction>
+_CCCL_HOST_DEVICE T reduce(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  InputIterator last,
+  T init,
+  BinaryFunction binary_op);
+
+/*! \p reduce is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce uses \p init as the initial value of the
+ *  reduction and \p binary_op as the binary function used for summation. \p reduce
+ *  is similar to the C++ Standard Template Library's <tt>std::accumulate</tt>.
+ *  The primary difference between the two functions is that <tt>std::accumulate</tt>
+ *  guarantees the order of summation, while \p reduce requires associativity of
+ *  \p binary_op to parallelize the reduction.
+ *
+ *  Note that \p reduce also assumes that the binary reduction operator (in this
+ *  case \p binary_op) is commutative.  If the reduction operator is not commutative
+ *  then \p thrust::reduce should not be used.  Instead, one could use
+ *  \p inclusive_scan (which does not require commutativity) and select the
+ *  last element of the output array.
+ *
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param init The initial value.
+ *  \param binary_op The binary function used to 'sum' values.
+ *  \return The result of the reduction.
+ *
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator's \c value_type is convertible to \c T.
+ *  \tparam T is a model of <a href="https://en.cppreference.com/w/cpp/named_req/CopyAssignable">Assignable</a>, and is
+ * convertible to \p BinaryFunction's first and second argument type.
+ *  \tparam BinaryFunction The function's return type must be convertible to \p OutputType.
+ *
+ *  The following code snippet demonstrates how to use \p reduce to
+ *  compute the maximum value of a sequence of integers.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/functional.h>
+ *  ...
+ *  int data[6] = {1, 0, 2, 2, 1, 3};
+ *  int result = thrust::reduce(data, data + 6,
+ *                              -1,
+ *                              ::cuda::maximum<int>());
+ *  // result == 3
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see transform_reduce
+ */
+template <typename InputIterator, typename T, typename BinaryFunction>
+T reduce(InputIterator first, InputIterator last, T init, BinaryFunction binary_op);
+
+/*! \p reduce_into is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce_into uses \c 0 as the initial value of the
+ *  reduction. \p reduce_into is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce_into requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce_into also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative. If the reduction operator is not commutative
+ *  then \p reduce_into should not be used. Instead, one could use \p inclusive_scan
+ *  (which does not require commutativity) and select the last element of the
+ *  output array.
+ *
+ *  Unlike \p reduce, \p reduce_into does not return the reduction result.
+ *  Instead, it is written to <tt>*output</tt>. Thus, when \p exec is
+ *  \p thrust::cuda::par_nosync, this algorithm does not wait for the work it
+ *  launches to complete. Additionally, you can use \p reduce_into to avoid
+ *  copying the reduction result from device memory to host memory.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the sequence.
+ *  \param last The end of the sequence.
+ *  \param output The location the reduction will be written to.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p InputIterator's \c value_type. If \c T is \c InputIterator's \c value_type, then <tt>T(0)</tt>
+ * is defined.
+ *  \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+ * Iterator</a> and \c OutputIterator's \c value_type is assignable from \c InputIterator's \c value_type.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_into to compute
+ *  the sum of a sequence of integers using the \p thrust::device execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/device_vector.h>
+ *  #include <thrust/execution_policy.h>
+ *
+ *  thrust::device_vector<int> data{1, 0, 2, 2, 1, 3};
+ *  thrust::device_vector<int> output(1);
+ *  thrust::reduce_into(thrust::device, data.begin(), data.end(), output.begin());
+ *  // output[0] == 9
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see reduce
+ */
+template <typename DerivedPolicy, typename InputIterator, typename OutputIterator>
+_CCCL_HOST_DEVICE void reduce_into(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  InputIterator last,
+  OutputIterator output);
+
+/*! \p reduce_into is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce_into uses \c 0 as the initial value of the
+ *  reduction. \p reduce_into is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce_into requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce_into also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative. If the reduction operator is not commutative
+ *  then \p reduce_into should not be used. Instead, one could use \p inclusive_scan
+ *  (which does not require commutativity) and select the last element of the
+ *  output array.
+ *
+ *  Unlike \p reduce, \p reduce_into does not return the reduction result.
+ *  Instead, it is written to <tt>*output</tt>. Thus, when \p exec is
+ *  \p thrust::cuda::par_nosync, this algorithm does not wait for the work it
+ *  launches to complete. Additionally, you can use \p reduce_into to avoid
+ *  copying the reduction result from device memory to host memory.
+ *
+ *  \param first The beginning of the sequence.
+ *  \param last The end of the sequence.
+ *  \param output The location the reduction will be written to.
+ *
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p InputIterator's \c value_type. If \c T is \c InputIterator's \c value_type, then <tt>T(0)</tt>
+ * is defined.
+ *  \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+ * Iterator</a> and \c OutputIterator's \c value_type is assignable from \c InputIterator's \c value_type.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_into to compute
+ *  the sum of a sequence of integers.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/device_vector.h>
+ *  #include <thrust/execution_policy.h>
+ *
+ *  thrust::device_vector<int> data{1, 0, 2, 2, 1, 3};
+ *  thrust::device_vector<int> output(1);
+ *  thrust::reduce_into(data.begin(), data.end(), output.begin());
+ *  // output[0] == 9
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see reduce
+ */
+template <typename InputIterator, typename OutputIterator>
+void reduce_into(InputIterator first, InputIterator last, OutputIterator output);
+
+/*! \p reduce_into is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce_into uses \p init as the initial value of the
+ *  reduction. \p reduce_into is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce_into requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce_into also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative. If the reduction operator is not commutative
+ *  then \p reduce_into should not be used. Instead, one could use \p inclusive_scan
+ *  (which does not require commutativity) and select the last element of the
+ *  output array.
+ *
+ *  Unlike \p reduce, \p reduce_into does not return the reduction result.
+ *  Instead, it is written to <tt>*output</tt>. Thus, when \p exec is
+ *  \p thrust::cuda::par_nosync, this algorithm does not wait for the work it
+ *  launches to complete. Additionally, you can use \p reduce_into to avoid
+ *  copying the reduction result from device memory to host memory.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param output The location the reduction will be written to.
+ *  \param init The initial value.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p T.
+ *  \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+ * Iterator</a> and \c OutputIterator's \c value_type is assignable from \c T.
+ *  \tparam T is convertible to \p InputIterator's \c value_type.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_into to compute
+ *  the sum of a sequence of integers including an initialization value using the
+ *  \p thrust::device execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/device_vector.h>
+ *  #include <thrust/execution_policy.h>
+ *
+ *  thrust::device_vector<int> data{1, 0, 2, 2, 1, 3};
+ *  thrust::device_vector<int> output(1);
+ *  thrust::reduce_into(thrust::device, data.begin(), data.end(), output.begin(), 1);
+ *  // output[0] == 10
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see reduce
+ */
+template <typename DerivedPolicy, typename InputIterator, typename OutputIterator, typename T>
+_CCCL_HOST_DEVICE void reduce_into(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  InputIterator last,
+  OutputIterator output,
+  T init);
+
+/*! \p reduce_into is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce_into uses \p init as the initial value of the
+ *  reduction. \p reduce_into is similar to the C++ Standard Template Library's
+ *  <tt>std::accumulate</tt>. The primary difference between the two functions
+ *  is that <tt>std::accumulate</tt> guarantees the order of summation, while
+ *  \p reduce_into requires associativity of the binary operation to parallelize
+ *  the reduction.
+ *
+ *  Note that \p reduce_into also assumes that the binary reduction operator (in this
+ *  case operator+) is commutative. If the reduction operator is not commutative
+ *  then \p reduce_into should not be used. Instead, one could use \p inclusive_scan
+ *  (which does not require commutativity) and select the last element of the
+ *  output array.
+ *
+ *  Unlike \p reduce, \p reduce_into does not return the reduction result.
+ *  Instead, it is written to <tt>*output</tt>. Thus, when \p exec is
+ *  \p thrust::cuda::par_nosync, this algorithm does not wait for the work it
+ *  launches to complete. Additionally, you can use \p reduce_into to avoid
+ *  copying the reduction result from device memory to host memory.
+ *
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param output The location the reduction will be written to.
+ *  \param init The initial value.
+ *
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and if \c x and \c y are objects of \p InputIterator's \c value_type, then <tt>x + y</tt> is defined and
+ * is convertible to \p T.
+ *  \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+ * Iterator</a> and \c OutputIterator's \c value_type is assignable from \c T.
+ *  \tparam T is convertible to \p InputIterator's \c value_type.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_into to compute
+ *  the sum of a sequence of integers including an initialization value.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/device_vector.h>
+ *  #include <thrust/execution_policy.h>
+ *
+ *  thrust::device_vector<int> data{1, 0, 2, 2, 1, 3};
+ *  thrust::device_vector<int> output(1);
+ *  thrust::reduce_into(data.begin(), data.end(), output.begin(), 1);
+ *  // output[0] == 10
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see reduce
+ */
+template <typename InputIterator, typename OutputIterator, typename T>
+void reduce_into(InputIterator first, InputIterator last, OutputIterator output, T init);
+
+/*! \p reduce_into is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce_into uses \p init as the initial value of the
+ *  reduction and \p binary_op as the binary function used for summation. \p reduce_into
+ *  is similar to the C++ Standard Template Library's <tt>std::accumulate</tt>.
+ *  The primary difference between the two functions is that <tt>std::accumulate</tt>
+ *  guarantees the order of summation, while \p reduce_into requires associativity of
+ *  \p binary_op to parallelize the reduction.
+ *
+ *  Note that \p reduce_into also assumes that the binary reduction operator (in this
+ *  case \p binary_op) is commutative. If the reduction operator is not commutative
+ *  then \p reduce_into should not be used. Instead, one could use \p inclusive_scan
+ *  (which does not require commutativity) and select the last element of the
+ *  output array.
+ *
+ *  Unlike \p reduce, \p reduce_into does not return the reduction result.
+ *  Instead, it is written to <tt>*output</tt>. Thus, when \p exec is
+ *  \p thrust::cuda::par_nosync, this algorithm does not wait for the work it
+ *  launches to complete. Additionally, you can use \p reduce_into to avoid
+ *  copying the reduction result from device memory to host memory.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param output The location the reduction will be written to.
+ *  \param init The initial value.
+ *  \param binary_op The binary function used to 'sum' values.
+ *  \return The result of the reduction.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator's \c value_type is convertible to \c T.
+ *  \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+ * Iterator</a> and \c OutputIterator's \c value_type is assignable from \c T.
+ *  \tparam T is a model of <a href="https://en.cppreference.com/w/cpp/named_req/CopyAssignable">Assignable</a>, and is
+ * convertible to \p BinaryFunction's first and second argument type.
+ *  \tparam BinaryFunction The function's return type must be convertible to \p OutputType.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_into to
+ *  compute the maximum value of a sequence of integers using the \p thrust::device
+ *  execution policy for parallelization:
+ *
+ *  \code
+ *  #include <cuda/functional>
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/device_vector.h>
+ *  #include <thrust/execution_policy.h>
+ *
+ *  thrust::device_vector<int> data{1, 0, 2, 2, 1, 3};
+ *  thrust::device_vector<int> output(1);
+ *  thrust::reduce_into(thrust::device,
+ *                      data.begin(), data.end(), output.begin(), -1,
+ *                      cuda::maximum{});
+ *  // output[0] == 3
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see reduce
+ *  \see transform_reduce
+ *  \see transform_reduce_into
+ */
+template <typename DerivedPolicy, typename InputIterator, typename OutputIterator, typename T, typename BinaryFunction>
+_CCCL_HOST_DEVICE void reduce_into(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator first,
+  InputIterator last,
+  OutputIterator output,
+  T init,
+  BinaryFunction binary_op);
+
+/*! \p reduce_into is a generalization of summation: it computes the sum (or some
+ *  other binary operation) of all the elements in the range <tt>[first,
+ *  last)</tt>. This version of \p reduce_into uses \p init as the initial value of the
+ *  reduction and \p binary_op as the binary function used for summation. \p reduce_into
+ *  is similar to the C++ Standard Template Library's <tt>std::accumulate</tt>.
+ *  The primary difference between the two functions is that <tt>std::accumulate</tt>
+ *  guarantees the order of summation, while \p reduce_into requires associativity of
+ *  \p binary_op to parallelize the reduction.
+ *
+ *  Note that \p reduce_into also assumes that the binary reduction operator (in this
+ *  case \p binary_op) is commutative.  If the reduction operator is not commutative
+ *  then \p thrust::reduce_into should not be used.  Instead, one could use
+ *  \p inclusive_scan (which does not require commutativity) and select the
+ *  last element of the output array.
+ *
+ *  \param first The beginning of the input sequence.
+ *  \param last The end of the input sequence.
+ *  \param output An output iterator to write the result to.
+ *  \param init The initial value.
+ *  \param binary_op The binary function used to 'sum' values.
+ *  \return The result of the reduction.
+ *
+ *  \tparam InputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a> and \c InputIterator's \c value_type is convertible to \c T.
+ *  \tparam OutputIterator is a model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output
+ * Iterator</a> and \c OutputIterator's \c value_type is assignable from \c T.
+ *  \tparam T is a model of <a href="https://en.cppreference.com/w/cpp/named_req/CopyAssignable">Assignable</a>, and is
+ * convertible to \p BinaryFunction's first and second argument type.
+ *  \tparam BinaryFunction The function's return type must be convertible to \p OutputType.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_into to
+ *  compute the maximum value of a sequence of integers.
+ *
+ *  \code
+ *  #include <cuda/functional>
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/device_vector.h>
+ *  #include <thrust/execution_policy.h>
+ *
+ *  thrust::device_vector<int> data{1, 0, 2, 2, 1, 3};
+ *  thrust::device_vector<int> output(1);
+ *  thrust::reduce_into(data.begin(), data.end(), output.begin(), -1,
+ *                      cuda::maximum{});
+ *  // output[0] == 3
+ *  \endcode
+ *
+ *  \see https://en.cppreference.com/w/cpp/algorithm/accumulate
+ *  \see reduce
+ *  \see transform_reduce
+ *  \see transform_reduce_into
+ */
+template <typename InputIterator, typename OutputIterator, typename T, typename BinaryFunction>
+void reduce_into(InputIterator first, InputIterator last, OutputIterator output, T init, BinaryFunction binary_op);
+
+/*! \p reduce_by_key is a generalization of \p reduce to key-value pairs.
+ *  For each group of consecutive keys in the range <tt>[keys_first, keys_last)</tt>
+ *  that are equal, \p reduce_by_key copies the first element of the group to the
+ *  \c keys_output. The corresponding values in the range are reduced using the
+ *  \c plus and the result copied to \c values_output.
+ *
+ *  This version of \p reduce_by_key uses the function object \c equal_to
+ *  to test for equality and \c plus to reduce values with equal keys.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param keys_first The beginning of the input key range.
+ *  \param keys_last  The end of the input key range.
+ *  \param values_first The beginning of the input value range.
+ *  \param keys_output The beginning of the output key range.
+ *  \param values_output The beginning of the output value range.
+ *  \return A pair of iterators at end of the ranges <tt>[keys_output, keys_output_last)</tt> and <tt>[values_output,
+ * values_output_last)</tt>.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, \tparam InputIterator2 is a model of <a
+ * href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>, \tparam OutputIterator1 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator1's \c value_type is convertible to \c OutputIterator1's \c value_type. \tparam OutputIterator2 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator2's \c value_type is convertible to \c OutputIterator2's \c value_type.
+ *
+ *  \pre The input ranges shall not overlap either output range.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_by_key to
+ *  compact a sequence of key/value pairs and sum values with equal keys using the \p thrust::host
+ *  execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *  const int N = 7;
+ *  int A[N] = {1, 3, 3, 3, 2, 2, 1}; // input keys
+ *  int B[N] = {9, 8, 7, 6, 5, 4, 3}; // input values
+ *  int C[N];                         // output keys
+ *  int D[N];                         // output values
+ *
+ *  cuda::std::pair<int*,int*> new_end;
+ *  new_end = thrust::reduce_by_key(thrust::host, A, A + N, B, C, D);
+ *
+ *  // The first four keys in C are now {1, 3, 2, 1} and new_end.first - C is 4.
+ *  // The first four values in D are now {9, 21, 9, 3} and new_end.second - D is 4.
+ *  \endcode
+ *
+ *  \see reduce
+ *  \see unique_copy
+ *  \see unique_by_key
+ *  \see unique_by_key_copy
+ */
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename OutputIterator1,
+          typename OutputIterator2>
+_CCCL_HOST_DEVICE ::cuda::std::pair<OutputIterator1, OutputIterator2> reduce_by_key(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 keys_first,
+  InputIterator1 keys_last,
+  InputIterator2 values_first,
+  OutputIterator1 keys_output,
+  OutputIterator2 values_output);
+
+/*! \p reduce_by_key is a generalization of \p reduce to key-value pairs.
+ *  For each group of consecutive keys in the range <tt>[keys_first, keys_last)</tt>
+ *  that are equal, \p reduce_by_key copies the first element of the group to the
+ *  \c keys_output. The corresponding values in the range are reduced using the
+ *  \c plus and the result copied to \c values_output.
+ *
+ *  This version of \p reduce_by_key uses the function object \c equal_to
+ *  to test for equality and \c plus to reduce values with equal keys.
+ *
+ *  \param keys_first The beginning of the input key range.
+ *  \param keys_last  The end of the input key range.
+ *  \param values_first The beginning of the input value range.
+ *  \param keys_output The beginning of the output key range.
+ *  \param values_output The beginning of the output value range.
+ *  \return A pair of iterators at end of the ranges <tt>[keys_output, keys_output_last)</tt> and <tt>[values_output,
+ * values_output_last)</tt>.
+ *
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, \tparam InputIterator2 is a model of <a
+ * href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>, \tparam OutputIterator1 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator1's \c value_type is convertible to \c OutputIterator1's \c value_type. \tparam OutputIterator2 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator2's \c value_type is convertible to \c OutputIterator2's \c value_type.
+ *
+ *  \pre The input ranges shall not overlap either output range.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_by_key to
+ *  compact a sequence of key/value pairs and sum values with equal keys.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  ...
+ *  const int N = 7;
+ *  int A[N] = {1, 3, 3, 3, 2, 2, 1}; // input keys
+ *  int B[N] = {9, 8, 7, 6, 5, 4, 3}; // input values
+ *  int C[N];                         // output keys
+ *  int D[N];                         // output values
+ *
+ *  cuda::std::pair<int*,int*> new_end;
+ *  new_end = thrust::reduce_by_key(A, A + N, B, C, D);
+ *
+ *  // The first four keys in C are now {1, 3, 2, 1} and new_end.first - C is 4.
+ *  // The first four values in D are now {9, 21, 9, 3} and new_end.second - D is 4.
+ *  \endcode
+ *
+ *  \see reduce
+ *  \see unique_copy
+ *  \see unique_by_key
+ *  \see unique_by_key_copy
+ */
+template <typename InputIterator1, typename InputIterator2, typename OutputIterator1, typename OutputIterator2>
+::cuda::std::pair<OutputIterator1, OutputIterator2> reduce_by_key(
+  InputIterator1 keys_first,
+  InputIterator1 keys_last,
+  InputIterator2 values_first,
+  OutputIterator1 keys_output,
+  OutputIterator2 values_output);
+
+/*! \p reduce_by_key is a generalization of \p reduce to key-value pairs.
+ *  For each group of consecutive keys in the range <tt>[keys_first, keys_last)</tt>
+ *  that are equal, \p reduce_by_key copies the first element of the group to the
+ *  \c keys_output. The corresponding values in the range are reduced using the
+ *  \c plus and the result copied to \c values_output.
+ *
+ *  This version of \p reduce_by_key uses the function object \c binary_pred
+ *  to test for equality and \c plus to reduce values with equal keys.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param keys_first The beginning of the input key range.
+ *  \param keys_last  The end of the input key range.
+ *  \param values_first The beginning of the input value range.
+ *  \param keys_output The beginning of the output key range.
+ *  \param values_output The beginning of the output value range.
+ *  \param binary_pred  The binary predicate used to determine equality.
+ *  \return A pair of iterators at end of the ranges <tt>[keys_output, keys_output_last)</tt> and <tt>[values_output,
+ * values_output_last)</tt>.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, \tparam InputIterator2 is a model of <a
+ * href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>, \tparam OutputIterator1 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator1's \c value_type is convertible to \c OutputIterator1's \c value_type. \tparam OutputIterator2 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator2's \c value_type is convertible to \c OutputIterator2's \c value_type. \tparam BinaryPredicate is a
+ * model of <a href="https://en.cppreference.com/w/cpp/named_req/BinaryPredicate">Binary Predicate</a>.
+ *
+ *  \pre The input ranges shall not overlap either output range.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_by_key to
+ *  compact a sequence of key/value pairs and sum values with equal keys using the \p thrust::host
+ *  execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *  const int N = 7;
+ *  int A[N] = {1, 3, 3, 3, 2, 2, 1}; // input keys
+ *  int B[N] = {9, 8, 7, 6, 5, 4, 3}; // input values
+ *  int C[N];                         // output keys
+ *  int D[N];                         // output values
+ *
+ *  cuda::std::pair<int*,int*> new_end;
+ *  ::cuda::std::equal_to<int> binary_pred;
+ *  new_end = thrust::reduce_by_key(thrust::host, A, A + N, B, C, D, binary_pred);
+ *
+ *  // The first four keys in C are now {1, 3, 2, 1} and new_end.first - C is 4.
+ *  // The first four values in D are now {9, 21, 9, 3} and new_end.second - D is 4.
+ *  \endcode
+ *
+ *  \see reduce
+ *  \see unique_copy
+ *  \see unique_by_key
+ *  \see unique_by_key_copy
+ */
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename OutputIterator1,
+          typename OutputIterator2,
+          typename BinaryPredicate>
+_CCCL_HOST_DEVICE ::cuda::std::pair<OutputIterator1, OutputIterator2> reduce_by_key(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 keys_first,
+  InputIterator1 keys_last,
+  InputIterator2 values_first,
+  OutputIterator1 keys_output,
+  OutputIterator2 values_output,
+  BinaryPredicate binary_pred);
+
+/*! \p reduce_by_key is a generalization of \p reduce to key-value pairs.
+ *  For each group of consecutive keys in the range <tt>[keys_first, keys_last)</tt>
+ *  that are equal, \p reduce_by_key copies the first element of the group to the
+ *  \c keys_output. The corresponding values in the range are reduced using the
+ *  \c plus and the result copied to \c values_output.
+ *
+ *  This version of \p reduce_by_key uses the function object \c binary_pred
+ *  to test for equality and \c plus to reduce values with equal keys.
+ *
+ *  \param keys_first The beginning of the input key range.
+ *  \param keys_last  The end of the input key range.
+ *  \param values_first The beginning of the input value range.
+ *  \param keys_output The beginning of the output key range.
+ *  \param values_output The beginning of the output value range.
+ *  \param binary_pred  The binary predicate used to determine equality.
+ *  \return A pair of iterators at end of the ranges <tt>[keys_output, keys_output_last)</tt> and <tt>[values_output,
+ * values_output_last)</tt>.
+ *
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, \tparam InputIterator2 is a model of <a
+ * href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>, \tparam OutputIterator1 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator1's \c value_type is convertible to \c OutputIterator1's \c value_type. \tparam OutputIterator2 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator2's \c value_type is convertible to \c OutputIterator2's \c value_type. \tparam BinaryPredicate is a
+ * model of <a href="https://en.cppreference.com/w/cpp/named_req/BinaryPredicate">Binary Predicate</a>.
+ *
+ *  \pre The input ranges shall not overlap either output range.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_by_key to
+ *  compact a sequence of key/value pairs and sum values with equal keys.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  ...
+ *  const int N = 7;
+ *  int A[N] = {1, 3, 3, 3, 2, 2, 1}; // input keys
+ *  int B[N] = {9, 8, 7, 6, 5, 4, 3}; // input values
+ *  int C[N];                         // output keys
+ *  int D[N];                         // output values
+ *
+ *  cuda::std::pair<int*,int*> new_end;
+ *  ::cuda::std::equal_to<int> binary_pred;
+ *  new_end = thrust::reduce_by_key(A, A + N, B, C, D, binary_pred);
+ *
+ *  // The first four keys in C are now {1, 3, 2, 1} and new_end.first - C is 4.
+ *  // The first four values in D are now {9, 21, 9, 3} and new_end.second - D is 4.
+ *  \endcode
+ *
+ *  \see reduce
+ *  \see unique_copy
+ *  \see unique_by_key
+ *  \see unique_by_key_copy
+ */
+template <typename InputIterator1,
+          typename InputIterator2,
+          typename OutputIterator1,
+          typename OutputIterator2,
+          typename BinaryPredicate>
+::cuda::std::pair<OutputIterator1, OutputIterator2> reduce_by_key(
+  InputIterator1 keys_first,
+  InputIterator1 keys_last,
+  InputIterator2 values_first,
+  OutputIterator1 keys_output,
+  OutputIterator2 values_output,
+  BinaryPredicate binary_pred);
+
+/*! \p reduce_by_key is a generalization of \p reduce to key-value pairs.
+ *  For each group of consecutive keys in the range <tt>[keys_first, keys_last)</tt>
+ *  that are equal, \p reduce_by_key copies the first element of the group to the
+ *  \c keys_output. The corresponding values in the range are reduced using the
+ *  \c BinaryFunction \c binary_op and the result copied to \c values_output.
+ *  Specifically, if consecutive key iterators \c i and \c (i + 1) are
+ *  such that <tt>binary_pred(*i, *(i+1))</tt> is \c true, then the corresponding
+ *  values are reduced to a single value with \c binary_op.
+ *
+ *  This version of \p reduce_by_key uses the function object \c binary_pred
+ *  to test for equality and \c binary_op to reduce values with equal keys.
+ *
+ *  The algorithm's execution is parallelized as determined by \p exec.
+ *
+ *  \param exec The execution policy to use for parallelization.
+ *  \param keys_first The beginning of the input key range.
+ *  \param keys_last  The end of the input key range.
+ *  \param values_first The beginning of the input value range.
+ *  \param keys_output The beginning of the output key range.
+ *  \param values_output The beginning of the output value range.
+ *  \param binary_pred  The binary predicate used to determine equality.
+ *  \param binary_op The binary function used to accumulate values.
+ *  \return A pair of iterators at end of the ranges <tt>[keys_output, keys_output_last)</tt> and <tt>[values_output,
+ * values_output_last)</tt>.
+ *
+ *  \tparam DerivedPolicy The name of the derived execution policy.
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, \tparam InputIterator2 is a model of <a
+ * href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>, \tparam OutputIterator1 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator1's \c value_type is convertible to \c OutputIterator1's \c value_type. \tparam OutputIterator2 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator2's \c value_type is convertible to \c OutputIterator2's \c value_type. \tparam BinaryPredicate is a
+ * model of <a href="https://en.cppreference.com/w/cpp/named_req/BinaryPredicate">Binary Predicate</a>.
+ *  \tparam BinaryFunction The function's return type must be convertible to \c OutputIterator2's \c value_type.
+ *
+ *  \pre The input ranges shall not overlap either output range.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_by_key to
+ *  compact a sequence of key/value pairs and sum values with equal keys using the \p thrust::host
+ *  execution policy for parallelization:
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  #include <thrust/execution_policy.h>
+ *  ...
+ *  const int N = 7;
+ *  int A[N] = {1, 3, 3, 3, 2, 2, 1}; // input keys
+ *  int B[N] = {9, 8, 7, 6, 5, 4, 3}; // input values
+ *  int C[N];                         // output keys
+ *  int D[N];                         // output values
+ *
+ *  cuda::std::pair<int*,int*> new_end;
+ *  ::cuda::std::equal_to<int> binary_pred;
+ *  ::cuda::std::plus<int> binary_op;
+ *  new_end = thrust::reduce_by_key(thrust::host, A, A + N, B, C, D, binary_pred, binary_op);
+ *
+ *  // The first four keys in C are now {1, 3, 2, 1} and new_end.first - C is 4.
+ *  // The first four values in D are now {9, 21, 9, 3} and new_end.second - D is 4.
+ *  \endcode
+ *
+ *  \see reduce
+ *  \see unique_copy
+ *  \see unique_by_key
+ *  \see unique_by_key_copy
+ */
+template <typename DerivedPolicy,
+          typename InputIterator1,
+          typename InputIterator2,
+          typename OutputIterator1,
+          typename OutputIterator2,
+          typename BinaryPredicate,
+          typename BinaryFunction>
+_CCCL_HOST_DEVICE ::cuda::std::pair<OutputIterator1, OutputIterator2> reduce_by_key(
+  const thrust::detail::execution_policy_base<DerivedPolicy>& exec,
+  InputIterator1 keys_first,
+  InputIterator1 keys_last,
+  InputIterator2 values_first,
+  OutputIterator1 keys_output,
+  OutputIterator2 values_output,
+  BinaryPredicate binary_pred,
+  BinaryFunction binary_op);
+
+/*! \p reduce_by_key is a generalization of \p reduce to key-value pairs.
+ *  For each group of consecutive keys in the range <tt>[keys_first, keys_last)</tt>
+ *  that are equal, \p reduce_by_key copies the first element of the group to the
+ *  \c keys_output. The corresponding values in the range are reduced using the
+ *  \c BinaryFunction \c binary_op and the result copied to \c values_output.
+ *  Specifically, if consecutive key iterators \c i and \c (i + 1) are
+ *  such that <tt>binary_pred(*i, *(i+1))</tt> is \c true, then the corresponding
+ *  values are reduced to a single value with \c binary_op.
+ *
+ *  This version of \p reduce_by_key uses the function object \c binary_pred
+ *  to test for equality and \c binary_op to reduce values with equal keys.
+ *
+ *  \param keys_first The beginning of the input key range.
+ *  \param keys_last  The end of the input key range.
+ *  \param values_first The beginning of the input value range.
+ *  \param keys_output The beginning of the output key range.
+ *  \param values_output The beginning of the output value range.
+ *  \param binary_pred  The binary predicate used to determine equality.
+ *  \param binary_op The binary function used to accumulate values.
+ *  \return A pair of iterators at end of the ranges <tt>[keys_output, keys_output_last)</tt> and <tt>[values_output,
+ * values_output_last)</tt>.
+ *
+ *  \tparam InputIterator1 is a model of <a href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input
+ * Iterator</a>, \tparam InputIterator2 is a model of <a
+ * href="https://en.cppreference.com/w/cpp/iterator/input_iterator">Input Iterator</a>, \tparam OutputIterator1 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator1's \c value_type is convertible to \c OutputIterator1's \c value_type. \tparam OutputIterator2 is a
+ * model of <a href="https://en.cppreference.com/w/cpp/iterator/output_iterator">Output Iterator</a> and and \p
+ * InputIterator2's \c value_type is convertible to \c OutputIterator2's \c value_type. \tparam BinaryPredicate is a
+ * model of <a href="https://en.cppreference.com/w/cpp/named_req/BinaryPredicate">Binary Predicate</a>.
+ * \tparam BinaryFunction The function's return type must be convertible to \c OutputIterator2's \c value_type.
+ *
+ *  \pre The input ranges shall not overlap either output range.
+ *
+ *  The following code snippet demonstrates how to use \p reduce_by_key to
+ *  compact a sequence of key/value pairs and sum values with equal keys.
+ *
+ *  \code
+ *  #include <thrust/reduce.h>
+ *  ...
+ *  const int N = 7;
+ *  int A[N] = {1, 3, 3, 3, 2, 2, 1}; // input keys
+ *  int B[N] = {9, 8, 7, 6, 5, 4, 3}; // input values
+ *  int C[N];                         // output keys
+ *  int D[N];                         // output values
+ *
+ *  cuda::std::pair<int*,int*> new_end;
+ *  ::cuda::std::equal_to<int> binary_pred;
+ *  ::cuda::std::plus<int> binary_op;
+ *  new_end = thrust::reduce_by_key(A, A + N, B, C, D, binary_pred, binary_op);
+ *
+ *  // The first four keys in C are now {1, 3, 2, 1} and new_end.first - C is 4.
+ *  // The first four values in D are now {9, 21, 9, 3} and new_end.second - D is 4.
+ *  \endcode
+ *
+ *  \see reduce
+ *  \see unique_copy
+ *  \see unique_by_key
+ *  \see unique_by_key_copy
+ */
+template <typename InputIterator1,
+          typename InputIterator2,
+          typename OutputIterator1,
+          typename OutputIterator2,
+          typename BinaryPredicate,
+          typename BinaryFunction>
+::cuda::std::pair<OutputIterator1, OutputIterator2> reduce_by_key(
+  InputIterator1 keys_first,
+  InputIterator1 keys_last,
+  InputIterator2 values_first,
+  OutputIterator1 keys_output,
+  OutputIterator2 values_output,
+  BinaryPredicate binary_pred,
+  BinaryFunction binary_op);
+
+/*! \} // end reductions
+ */
+
+THRUST_NAMESPACE_END
+
+#include <thrust/detail/reduce.inl>