cuda-cccl 0.3.4__cp311-cp311-manylinux_2_24_aarch64.whl

cuda/cccl/headers/include/cub/agent/agent_batch_memcpy.cuh

@@ -0,0 +1,1158 @@
+// SPDX-FileCopyrightText: Copyright (c) 2011-2022, NVIDIA CORPORATION. All rights reserved.
+// SPDX-License-Identifier: BSD-3
+
+/**
+ * \file
+ * cub::AgentBatchMemcpy implements device-wide copying of a batch of device-accessible
+ * source-buffers to device-accessible destination-buffers.
+ */
+
+#pragma once
+
+#include <cub/config.cuh>
+
+#if defined(_CCCL_IMPLICIT_SYSTEM_HEADER_GCC)
+#  pragma GCC system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_CLANG)
+#  pragma clang system_header
+#elif defined(_CCCL_IMPLICIT_SYSTEM_HEADER_MSVC)
+#  pragma system_header
+#endif // no system header
+
+#include <cub/agent/single_pass_scan_operators.cuh>
+#include <cub/block/block_exchange.cuh>
+#include <cub/block/block_load.cuh>
+#include <cub/block/block_run_length_decode.cuh>
+#include <cub/block/block_scan.cuh>
+#include <cub/block/block_store.cuh>
+#include <cub/util_ptx.cuh>
+#include <cub/util_type.cuh>
+
+#include <cuda/__cmath/ceil_div.h>
+#include <cuda/__cmath/round_up.h>
+#include <cuda/std/__functional/operations.h>
+#include <cuda/std/__type_traits/conditional.h>
+#include <cuda/std/__type_traits/enable_if.h>
+#include <cuda/std/__type_traits/type_identity.h>
+#include <cuda/std/cstdint>
+
+CUB_NAMESPACE_BEGIN
+
+namespace detail::batch_memcpy
+{
+template <bool PTR_IS_FOUR_BYTE_ALIGNED>
+_CCCL_FORCEINLINE _CCCL_DEVICE void
+LoadVectorAndFunnelShiftR(uint32_t const* aligned_ptr, uint32_t bit_shift, uint4& data_out)
+{
+  data_out = {aligned_ptr[0], aligned_ptr[1], aligned_ptr[2], aligned_ptr[3]};
+
+  if (!PTR_IS_FOUR_BYTE_ALIGNED)
+  {
+    uint32_t tail = aligned_ptr[4];
+    data_out.x    = __funnelshift_r(data_out.x, data_out.y, bit_shift);
+    data_out.y    = __funnelshift_r(data_out.y, data_out.z, bit_shift);
+    data_out.z    = __funnelshift_r(data_out.z, data_out.w, bit_shift);
+    data_out.w    = __funnelshift_r(data_out.w, tail, bit_shift);
+  }
+}
+
+template <bool PTR_IS_FOUR_BYTE_ALIGNED>
+_CCCL_FORCEINLINE _CCCL_DEVICE void
+LoadVectorAndFunnelShiftR(uint32_t const* aligned_ptr, uint32_t bit_shift, uint2& data_out)
+{
+  data_out = {aligned_ptr[0], aligned_ptr[1]};
+
+  if (!PTR_IS_FOUR_BYTE_ALIGNED)
+  {
+    uint32_t tail = aligned_ptr[2];
+    data_out.x    = __funnelshift_r(data_out.x, data_out.y, bit_shift);
+    data_out.y    = __funnelshift_r(data_out.y, tail, bit_shift);
+  }
+}
+
+template <bool PTR_IS_FOUR_BYTE_ALIGNED>
+_CCCL_FORCEINLINE _CCCL_DEVICE void
+LoadVectorAndFunnelShiftR(uint32_t const* aligned_ptr, uint32_t bit_shift, uint32_t& data_out)
+{
+  data_out = aligned_ptr[0];
+
+  if (!PTR_IS_FOUR_BYTE_ALIGNED)
+  {
+    uint32_t tail = aligned_ptr[1];
+    data_out      = __funnelshift_r(data_out, tail, bit_shift);
+  }
+}
+
+/**
+ * @brief Loads data from \p ptr into \p data_out without requiring \p ptr to be aligned.
+ * @note If \p ptr isn't aligned to four bytes, the bytes from the last four-byte aligned address up
+ * to \p ptr are loaded too (but dropped) and, hence, need to be device-accessible. Similarly, if
+ * \p ptr isn't aligned to four bytes, the bytes from `(ptr + sizeof(VectorT))` up to the following
+ * four-byte aligned address are loaded too (but dropped), and, hence, need to be device-accessible.
+ *
+ * @tparam VectorT The vector type used for vectorized stores (i.e., one of uint4, uint2, uint32_t)
+ * @param ptr The pointer from which the data is supposed to be loaded
+ * @param data_out The vector type that stores the data loaded from \p ptr
+ */
+template <typename VectorT>
+_CCCL_FORCEINLINE _CCCL_DEVICE void LoadVector(const char* ptr, VectorT& data_out)
+{
+  const uint32_t offset            = reinterpret_cast<uintptr_t>(ptr) % 4U;
+  const uint32_t* aligned_ptr      = reinterpret_cast<uint32_t const*>(ptr - offset);
+  constexpr uint32_t bits_per_byte = 8U;
+  const uint32_t bit_shift         = offset * bits_per_byte;
+
+  // If `ptr` is aligned to four bytes, we can perform a simple uint32_t-aliased load
+  if (offset == 0)
+  {
+    LoadVectorAndFunnelShiftR<true>(aligned_ptr, bit_shift, data_out);
+  }
+  // Otherwise, we need to load extra bytes and perform funnel-shifting
+  else
+  {
+    LoadVectorAndFunnelShiftR<false>(aligned_ptr, bit_shift, data_out);
+  }
+}
+
+/**
+ * @brief Helper data structure to hold information on the byte range for which we can safely
+ * perform vectorized copies.
+ *
+ * @tparam VectorT The vector type used for vectorized stores (i.e., one of uint4, uint2, uint32_t)
+ */
+template <typename VectorT>
+struct PointerRange
+{
+  VectorT* out_begin;
+  VectorT* out_end;
+  const char* in_begin;
+  const char* in_end;
+};
+
+/**
+ * @brief Both `out_start_aligned` and `out_end_aligned` are indices into `out_ptr`.
+ * `out_start_aligned` is the first VectorT-aligned memory location after `out_ptr + 3`.
+ * `out_end_aligned` is the last VectorT-aligned memory location before `out_end - 4`, where out_end
+ * corresponds to one past the last byte to be copied. Bytes between `[out_start_aligned,
+ * out_end_aligned)` will be copied using VectorT. `out_ptr + 3` and `out_end - 4` are used instead
+ * of `out_ptr` and `out_end` to avoid `LoadVector` reading beyond data boundaries.
+ *
+ * @tparam VectorT The vector type used for vectorized stores (i.e., one of uint4, uint2, uint32_t)
+ * @tparam ByteOffsetT Type used to index the bytes within the buffers
+ * @param in_begin Pointer to the beginning of the byte range that shall be copied
+ * @param out_begin Pointer to the beginning of the byte range that shall be copied
+ * @param num_bytes Number of bytes that shall be copied
+ * @return The byte range that can safely be copied using vectorized stores of type VectorT
+ */
+template <typename VectorT, typename ByteOffsetT>
+_CCCL_DEVICE _CCCL_FORCEINLINE PointerRange<VectorT>
+GetAlignedPtrs(const void* in_begin, void* out_begin, ByteOffsetT num_bytes)
+{
+  // Data type size used for vectorized stores
+  constexpr auto out_datatype_size = uint32_t{sizeof(VectorT)};
+  // Data type size used for type-aliased loads
+  constexpr auto in_datatype_size = uint32_t{sizeof(uint32_t)};
+
+  // char-aliased ptrs to simplify pointer arithmetic
+  char* out_ptr      = reinterpret_cast<char*>(out_begin);
+  const char* in_ptr = reinterpret_cast<const char*>(in_begin);
+
+  // Number of bytes between the first VectorT-aligned address at or before out_begin and out_begin
+  const uint32_t alignment_offset = reinterpret_cast<uintptr_t>(out_ptr) % out_datatype_size;
+
+  // The first VectorT-aligned address before (or at) out_begin
+  char* out_chars_aligned = reinterpret_cast<char*>(out_ptr - alignment_offset);
+
+  // The number of extra bytes preceding `in_ptr` that are loaded but dropped
+  uint32_t in_extra_bytes = reinterpret_cast<uintptr_t>(in_ptr) % in_datatype_size;
+
+  // The offset required by `LoadVector`:
+  // If the input pointer is not aligned, we load data from the last aligned address preceding the
+  // pointer. That is, loading up to (in_datatype_size-1) bytes before `in_ptr`
+  uint32_t in_offset_req = in_extra_bytes;
+
+  // Bytes after `out_chars_aligned` to the first VectorT-aligned address at or after `out_begin`
+  uint32_t out_start_aligned = ::cuda::round_up(in_offset_req + alignment_offset, out_datatype_size);
+
+  // Compute the beginning of the aligned ranges (output and input pointers)
+  VectorT* out_aligned_begin   = reinterpret_cast<VectorT*>(out_chars_aligned + out_start_aligned);
+  const char* in_aligned_begin = in_ptr + (reinterpret_cast<char*>(out_aligned_begin) - out_ptr);
+
+  // If the aligned range is not aligned for the input pointer, we load up to (in_datatype_size-1)
+  // bytes after the last byte that is copied. That is, we always load four bytes up to the next
+  // aligned input address at a time. E.g., if the last byte loaded is one byte past the last
+  // aligned address we'll also load the three bytes after that byte.
+  uint32_t in_extra_bytes_from_aligned = (reinterpret_cast<uintptr_t>(in_aligned_begin) % in_datatype_size);
+  uint32_t in_end_padding_req          = (in_datatype_size - in_extra_bytes_from_aligned) % in_datatype_size;
+
+  // Bytes after `out_chars_aligned` to the last VectorT-aligned
+  // address at (or before) `out_begin` + `num_bytes`
+  uint32_t out_end_aligned{};
+  if (in_end_padding_req + alignment_offset > num_bytes)
+  {
+    out_end_aligned = out_start_aligned;
+  }
+  else
+  {
+    out_end_aligned = (num_bytes - in_end_padding_req + alignment_offset) / out_datatype_size * out_datatype_size;
+  }
+
+  VectorT* out_aligned_end   = reinterpret_cast<VectorT*>(out_chars_aligned + out_end_aligned);
+  const char* in_aligned_end = in_ptr + (reinterpret_cast<char*>(out_aligned_end) - out_ptr);
+
+  return {out_aligned_begin, out_aligned_end, in_aligned_begin, in_aligned_end};
+}
+
+/**
+ * @brief Cooperatively copies \p num_bytes from \p src to \p dest using vectorized stores of type
+ * \p VectorT for addresses within [dest, dest + num_bytes) that are aligned to \p VectorT. A
+ * byte-wise copy is used for byte-ranges that are not aligned to \p VectorT.
+ *
+ * @tparam LOGICAL_WARP_SIZE The number of threads cooperaing to copy the data; all threads within
+ * [0,  `LOGICAL_WARP_SIZE`) must invoke this method with the same arguments
+ * @tparam VectorT The vector type used for vectorized stores (i.e., one of uint4, uint2, uint32_t)
+ * @tparam ByteOffsetT Type used to index the bytes within the buffers
+ * @param thread_rank The thread rank within the group that cooperates to copy the data must be
+ * within [0, `LOGICAL_WARP_SIZE`)
+ * @param dest Pointer to the memory location to copy to
+ * @param num_bytes Number of bytes to copy
+ * @param src Pointer to the memory location to copy from
+ */
+template <int LOGICAL_WARP_SIZE, typename VectorT, typename ByteOffsetT>
+_CCCL_DEVICE _CCCL_FORCEINLINE void
+vectorized_copy(int32_t thread_rank, void* dest, ByteOffsetT num_bytes, const void* src)
+{
+  char* out_ptr      = reinterpret_cast<char*>(dest);
+  const char* in_ptr = reinterpret_cast<const char*>(src);
+
+  // Gets the byte range that can safely be copied using vectorized stores of type VectorT
+  auto aligned_range = GetAlignedPtrs<VectorT>(src, dest, num_bytes);
+
+  // If byte range for which we can use vectorized copies is empty -> use byte-wise copies
+  if (aligned_range.out_end <= aligned_range.out_begin)
+  {
+    for (ByteOffsetT ichar = thread_rank; ichar < num_bytes; ichar += LOGICAL_WARP_SIZE)
+    {
+      out_ptr[ichar] = in_ptr[ichar];
+    }
+  }
+  else
+  {
+    // Copy bytes in range `[dest, aligned_range.out_begin)`
+    out_ptr += thread_rank;
+    in_ptr += thread_rank;
+    while (out_ptr < reinterpret_cast<char*>(aligned_range.out_begin))
+    {
+      *out_ptr = *in_ptr;
+      out_ptr += LOGICAL_WARP_SIZE;
+      in_ptr += LOGICAL_WARP_SIZE;
+    }
+
+    // Copy bytes in range `[aligned_range.out_begin, aligned_range.out_end)`
+    VectorT* aligned_range_begin = aligned_range.out_begin + thread_rank;
+    const char* in_aligned_begin = aligned_range.in_begin + thread_rank * sizeof(VectorT);
+    while (aligned_range_begin < aligned_range.out_end)
+    {
+      VectorT data_in;
+      LoadVector(in_aligned_begin, data_in);
+      *aligned_range_begin = data_in;
+      in_aligned_begin += sizeof(VectorT) * LOGICAL_WARP_SIZE;
+      aligned_range_begin += LOGICAL_WARP_SIZE;
+    }
+
+    // Copy bytes in range `[aligned_range.out_end, dest + num_bytes)`.
+    out_ptr = reinterpret_cast<char*>(aligned_range.out_end) + thread_rank;
+    in_ptr  = aligned_range.in_end + thread_rank;
+    while (out_ptr < reinterpret_cast<char*>(dest) + num_bytes)
+    {
+      *out_ptr = *in_ptr;
+      out_ptr += LOGICAL_WARP_SIZE;
+      in_ptr += LOGICAL_WARP_SIZE;
+    }
+  }
+}
+
+template <bool IsMemcpy,
+          uint32_t LOGICAL_WARP_SIZE,
+          typename InputBufferT,
+          typename OutputBufferT,
+          typename OffsetT,
+          ::cuda::std::enable_if_t<IsMemcpy, int> = 0>
+_CCCL_DEVICE _CCCL_FORCEINLINE void
+copy_items(InputBufferT input_buffer, OutputBufferT output_buffer, OffsetT num_bytes, OffsetT offset = 0)
+{
+  vectorized_copy<LOGICAL_WARP_SIZE, uint4>(
+    threadIdx.x % LOGICAL_WARP_SIZE,
+    &reinterpret_cast<char*>(output_buffer)[offset],
+    num_bytes,
+    &reinterpret_cast<const char*>(input_buffer)[offset]);
+}
+
+template <bool IsMemcpy,
+          uint32_t LOGICAL_WARP_SIZE,
+          typename InputBufferT,
+          typename OutputBufferT,
+          typename OffsetT,
+          ::cuda::std::enable_if_t<!IsMemcpy, int> = 0>
+_CCCL_DEVICE _CCCL_FORCEINLINE void
+copy_items(InputBufferT input_buffer, OutputBufferT output_buffer, OffsetT num_items, OffsetT offset = 0)
+{
+  output_buffer += offset;
+  input_buffer += offset;
+  for (OffsetT i = threadIdx.x % LOGICAL_WARP_SIZE; i < num_items; i += LOGICAL_WARP_SIZE)
+  {
+    *(output_buffer + i) = *(input_buffer + i);
+  }
+}
+
+template <bool IsMemcpy, typename AliasT, typename InputIt, typename OffsetT, ::cuda::std::enable_if_t<IsMemcpy, int> = 0>
+_CCCL_DEVICE _CCCL_FORCEINLINE AliasT read_item(InputIt buffer_src, OffsetT offset)
+{
+  return *(reinterpret_cast<const AliasT*>(buffer_src) + offset);
+}
+
+template <bool IsMemcpy, typename AliasT, typename InputIt, typename OffsetT, ::cuda::std::enable_if_t<!IsMemcpy, int> = 0>
+_CCCL_DEVICE _CCCL_FORCEINLINE AliasT read_item(InputIt buffer_src, OffsetT offset)
+{
+  return *(buffer_src + offset);
+}
+
+template <bool IsMemcpy, typename AliasT, typename OutputIt, typename OffsetT, ::cuda::std::enable_if_t<IsMemcpy, int> = 0>
+_CCCL_DEVICE _CCCL_FORCEINLINE void write_item(OutputIt buffer_dst, OffsetT offset, AliasT value)
+{
+  *(reinterpret_cast<AliasT*>(buffer_dst) + offset) = value;
+}
+
+template <bool IsMemcpy, typename AliasT, typename OutputIt, typename OffsetT, ::cuda::std::enable_if_t<!IsMemcpy, int> = 0>
+_CCCL_DEVICE _CCCL_FORCEINLINE void write_item(OutputIt buffer_dst, OffsetT offset, AliasT value)
+{
+  *(buffer_dst + offset) = value;
+}
+
+enum class prefer_power_of_two_bits_option
+{
+  no,
+  yes
+};
+
+/**
+ * @brief A helper class that allows threads to maintain multiple counters, where the counter that
+ * shall be incremented can be addressed dynamically without incurring register spillage.
+ *
+ * @tparam NumItems The number of counters to allocate
+ * @tparam MaxItemValue The maximum count that must be supported.
+ * @tparam PreferPowerOfTwoBits Whether the number of bits to dedicate to each counter should be a
+ * power-of-two. If enabled, this allows replacing integer multiplication with a bit-shift in
+ * exchange for higher register pressure.
+ * @tparam BackingUnitT The data type that is used to provide the bits of all the counters that
+ * shall be allocated.
+ */
+template <uint32_t NumItems,
+          uint32_t MaxItemValue,
+          prefer_power_of_two_bits_option PreferPowerOfTwoBits,
+          typename BackingUnitT = uint32_t>
+class bit_packed_counter
+{
+private:
+  /// The minimum number of bits required to represent all values from [0, MaxItemValue]
+  static constexpr uint32_t MIN_BITS_PER_ITEM =
+    (MaxItemValue == 0U) ? 1U : cub::Log2<static_cast<int32_t>(MaxItemValue + 1U)>::VALUE;
+
+  /// The number of bits allocated for each item. For pre-Volta, we prefer a power-of-2 here to
+  /// have the compiler replace costly integer multiplication with bit-shifting.
+  static constexpr uint32_t BITS_PER_ITEM =
+    (PreferPowerOfTwoBits == prefer_power_of_two_bits_option::yes)
+      ? (0x01ULL << (cub::Log2<static_cast<int32_t>(MIN_BITS_PER_ITEM)>::VALUE))
+      : MIN_BITS_PER_ITEM;
+
+  /// The number of bits that each backing data type can store
+  static constexpr uint32_t NUM_BITS_PER_UNIT = sizeof(BackingUnitT) * 8;
+
+  /// The number of items that each backing data type can store
+  static constexpr uint32_t ITEMS_PER_UNIT = NUM_BITS_PER_UNIT / BITS_PER_ITEM;
+
+  /// The number of bits the backing data type is actually making use of
+  static constexpr uint32_t USED_BITS_PER_UNIT = ITEMS_PER_UNIT * BITS_PER_ITEM;
+
+  /// The number of backing data types required to store the given number of items
+  static constexpr uint32_t NUM_TOTAL_UNITS = ::cuda::ceil_div(NumItems, ITEMS_PER_UNIT);
+
+  /// This is the net number of bit-storage provided by each unit (remainder bits are unused)
+  static constexpr uint32_t UNIT_MASK =
+    (USED_BITS_PER_UNIT >= (8U * sizeof(uint32_t))) ? 0xFFFFFFFF : (0x01U << USED_BITS_PER_UNIT) - 1;
+  /// This is the bit-mask for each item
+  static constexpr uint32_t ITEM_MASK =
+    (BITS_PER_ITEM >= (8U * sizeof(uint32_t))) ? 0xFFFFFFFF : (0x01U << BITS_PER_ITEM) - 1;
+
+  //------------------------------------------------------------------------------
+  // ACCESSORS
+  //------------------------------------------------------------------------------
+
+public:
+  _CCCL_DEVICE _CCCL_FORCEINLINE uint32_t get(uint32_t index) const
+  {
+    const uint32_t target_offset = index * BITS_PER_ITEM;
+    uint32_t val                 = 0;
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < NUM_TOTAL_UNITS; ++i)
+    {
+      // In case the bit-offset of the counter at <index> is larger than the bit range of the
+      // current unit, the bit_shift amount will be larger than the bits provided by this unit. As
+      // C++'s bit-shift has undefined behaviour if the bits being shifted exceed the operand width,
+      // we use the PTX instruction `shr` to make sure behaviour is well-defined.
+      // Negative bit-shift amounts wrap around in unsigned integer math and are ultimately clamped.
+      const uint32_t bit_shift = target_offset - i * USED_BITS_PER_UNIT;
+      val |= detail::LogicShiftRight(data[i], bit_shift) & ITEM_MASK;
+    }
+    return val;
+  }
+
+  _CCCL_DEVICE _CCCL_FORCEINLINE void add(uint32_t index, uint32_t value)
+  {
+    const uint32_t target_offset = index * BITS_PER_ITEM;
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < NUM_TOTAL_UNITS; ++i)
+    {
+      // In case the bit-offset of the counter at <index> is larger than the bit range of the
+      // current unit, the bit_shift amount will be larger than the bits provided by this unit. As
+      // C++'s bit-shift has undefined behaviour if the bits being shifted exceed the operand width,
+      // we use the PTX instruction `shl` to make sure behaviour is well-defined.
+      // Negative bit-shift amounts wrap around in unsigned integer math and are ultimately clamped.
+      const uint32_t bit_shift = target_offset - i * USED_BITS_PER_UNIT;
+      data[i] += detail::LogicShiftLeft(value, bit_shift) & UNIT_MASK;
+    }
+  }
+
+  _CCCL_DEVICE bit_packed_counter operator+(const bit_packed_counter& rhs) const
+  {
+    bit_packed_counter result;
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < NUM_TOTAL_UNITS; ++i)
+    {
+      result.data[i] = data[i] + rhs.data[i];
+    }
+    return result;
+  }
+
+  //------------------------------------------------------------------------------
+  // MEMBER VARIABLES
+  //------------------------------------------------------------------------------
+
+private:
+  BackingUnitT data[NUM_TOTAL_UNITS] = {};
+};
+
+/**
+ * Parameterizable tuning policy type for AgentBatchMemcpy
+ */
+template <uint32_t BlockThreads,
+          uint32_t BuffersPerThread,
+          uint32_t TlevBytesPerThread,
+          bool PreferPow2Bits,
+          uint32_t BlockLevelTileSize,
+          uint32_t WarpLevelThreshold,
+          uint32_t BlockLevelThreshold,
+          class BuffDelayConstructor,
+          class BlockDelayConstructor>
+struct AgentBatchMemcpyPolicy
+{
+  /// Threads per thread block
+  static constexpr uint32_t BLOCK_THREADS = BlockThreads;
+  /// Items per thread (per tile of input)
+  static constexpr uint32_t BUFFERS_PER_THREAD = BuffersPerThread;
+  /// The number of bytes that each thread will work on with each iteration of reading in bytes
+  /// from one or more
+  // source-buffers and writing them out to the respective destination-buffers.
+  static constexpr uint32_t TLEV_BYTES_PER_THREAD = TlevBytesPerThread;
+  /// Whether the bit_packed_counter should prefer allocating a power-of-2 number of bits per
+  /// counter
+  static constexpr uint32_t PREFER_POW2_BITS = PreferPow2Bits;
+  /// BLEV tile size granularity
+  static constexpr uint32_t BLOCK_LEVEL_TILE_SIZE = BlockLevelTileSize;
+
+  static constexpr uint32_t WARP_LEVEL_THRESHOLD  = WarpLevelThreshold;
+  static constexpr uint32_t BLOCK_LEVEL_THRESHOLD = BlockLevelThreshold;
+
+  using buff_delay_constructor  = BuffDelayConstructor;
+  using block_delay_constructor = BlockDelayConstructor;
+};
+
+template <typename AgentMemcpySmallBuffersPolicyT,
+          typename InputBufferIt,
+          typename OutputBufferIt,
+          typename BufferSizeIteratorT,
+          typename BufferOffsetT,
+          typename BlevBufferSrcsOutItT,
+          typename BlevBufferDstsOutItT,
+          typename BlevBufferSizesOutItT,
+          typename BlevBufferTileOffsetsOutItT,
+          typename BlockOffsetT,
+          typename BLevBufferOffsetTileState,
+          typename BLevBlockOffsetTileState,
+          bool IsMemcpy>
+class AgentBatchMemcpy
+{
+private:
+  //---------------------------------------------------------------------
+  // CONFIGS / CONSTANTS
+  //---------------------------------------------------------------------
+  // Tuning policy-based configurations
+  static constexpr uint32_t BLOCK_THREADS         = AgentMemcpySmallBuffersPolicyT::BLOCK_THREADS;
+  static constexpr uint32_t BUFFERS_PER_THREAD    = AgentMemcpySmallBuffersPolicyT::BUFFERS_PER_THREAD;
+  static constexpr uint32_t TLEV_BYTES_PER_THREAD = AgentMemcpySmallBuffersPolicyT::TLEV_BYTES_PER_THREAD;
+  static constexpr prefer_power_of_two_bits_option PREFER_POW2_BITS =
+    (AgentMemcpySmallBuffersPolicyT::PREFER_POW2_BITS)
+      ? prefer_power_of_two_bits_option::yes
+      : prefer_power_of_two_bits_option::no;
+  static constexpr uint32_t BLOCK_LEVEL_TILE_SIZE = AgentMemcpySmallBuffersPolicyT::BLOCK_LEVEL_TILE_SIZE;
+
+  // Derived configs
+  static constexpr uint32_t BUFFERS_PER_BLOCK       = BUFFERS_PER_THREAD * BLOCK_THREADS;
+  static constexpr uint32_t TLEV_BUFFERS_PER_THREAD = BUFFERS_PER_THREAD;
+  static constexpr uint32_t BLEV_BUFFERS_PER_THREAD = BUFFERS_PER_THREAD;
+
+  static constexpr uint32_t WARP_LEVEL_THRESHOLD = AgentMemcpySmallBuffersPolicyT::WARP_LEVEL_THRESHOLD;
+
+  static constexpr uint32_t BLOCK_LEVEL_THRESHOLD = AgentMemcpySmallBuffersPolicyT::BLOCK_LEVEL_THRESHOLD;
+
+  static constexpr uint32_t BUFFER_STABLE_PARTITION = false;
+
+  // Constants
+  enum : uint32_t
+  {
+    TLEV_SIZE_CLASS = 0,
+    WLEV_SIZE_CLASS,
+    BLEV_SIZE_CLASS,
+    NUM_SIZE_CLASSES,
+  };
+
+  //---------------------------------------------------------------------
+  // TYPE DECLARATIONS
+  //---------------------------------------------------------------------
+  /// Internal load/store type. For byte-wise memcpy, a single-byte type
+  using AliasT = typename ::cuda::std::
+    conditional_t<IsMemcpy, ::cuda::std::type_identity<char>, lazy_trait<it_value_t, it_value_t<InputBufferIt>>>::type;
+
+  /// Types of the input and output buffers
+  using InputBufferT  = it_value_t<InputBufferIt>;
+  using OutputBufferT = it_value_t<OutputBufferIt>;
+
+  /// Type that has to be sufficiently large to hold any of the buffers' sizes.
+  /// The BufferSizeIteratorT's value type must be convertible to this type.
+  using BufferSizeT = it_value_t<BufferSizeIteratorT>;
+
+  /// Type used to index into the tile of buffers that this thread block is assigned to.
+  using BlockBufferOffsetT = uint16_t;
+
+  /// Internal type used to index into the bytes of and represent size of a TLEV buffer
+  using TLevBufferSizeT = uint16_t;
+
+  /**
+   * @brief Helper struct to simplify BlockExchange within a single four-byte word
+   */
+  struct ZippedTLevByteAssignment
+  {
+    // The buffer id within this tile
+    BlockBufferOffsetT tile_buffer_id;
+
+    // Byte-offset within that buffer
+    TLevBufferSizeT buffer_byte_offset;
+  };
+
+  /**
+   * POD to keep track of <buffer_id, buffer_size> pairs after having partitioned this tile's
+   * buffers by their size.
+   */
+  struct BufferTuple
+  {
+    // Size is only valid (and relevant) for buffers that are use thread-level collaboration
+    TLevBufferSizeT size;
+
+    // The buffer id relative to this tile (i.e., the buffer id within this tile)
+    BlockBufferOffsetT buffer_id;
+  };
+
+  // Load buffers in a striped arrangement if we do not want to perform a stable partitioning into
+  // small, medium, and large buffers, otherwise load them in a blocked arrangement
+  using BufferLoadT =
+    BlockLoad<BufferSizeT,
+              static_cast<int32_t>(BLOCK_THREADS),
+              static_cast<int32_t>(BUFFERS_PER_THREAD),
+              BUFFER_STABLE_PARTITION ? BLOCK_LOAD_WARP_TRANSPOSE : BLOCK_LOAD_STRIPED>;
+
+  // A vectorized counter that will count the number of buffers that fall into each of the
+  // size-classes. Where the size class represents the collaboration level that is required to
+  // process a buffer. The collaboration level being either:
+  //-> (1) TLEV (thread-level collaboration), requiring one or multiple threads but not a FULL warp
+  // to collaborate
+  //-> (2) WLEV (warp-level collaboration), requiring a full warp to collaborate on a buffer
+  //-> (3) BLEV (block-level collaboration), requiring one or multiple thread blocks to collaborate
+  // on a buffer */
+  using VectorizedSizeClassCounterT = bit_packed_counter<NUM_SIZE_CLASSES, BUFFERS_PER_BLOCK, PREFER_POW2_BITS>;
+
+  // Block-level scan used to compute the write offsets
+  using BlockSizeClassScanT = cub::BlockScan<VectorizedSizeClassCounterT, static_cast<int32_t>(BLOCK_THREADS)>;
+
+  //
+  using BlockBLevTileCountScanT = cub::BlockScan<BlockOffsetT, static_cast<int32_t>(BLOCK_THREADS)>;
+
+  // Block-level run-length decode algorithm to evenly distribute work of all buffers requiring
+  // thread-level collaboration
+  using BlockRunLengthDecodeT =
+    cub::BlockRunLengthDecode<BlockBufferOffsetT,
+                              static_cast<int32_t>(BLOCK_THREADS),
+                              static_cast<int32_t>(TLEV_BUFFERS_PER_THREAD),
+                              static_cast<int32_t>(TLEV_BYTES_PER_THREAD)>;
+
+  using BlockExchangeTLevT =
+    cub::BlockExchange<ZippedTLevByteAssignment,
+                       static_cast<int32_t>(BLOCK_THREADS),
+                       static_cast<int32_t>(TLEV_BYTES_PER_THREAD)>;
+
+  using BLevBuffScanPrefixCallbackOpT =
+    TilePrefixCallbackOp<BufferOffsetT,
+                         ::cuda::std::plus<>,
+                         BLevBufferOffsetTileState,
+                         typename AgentMemcpySmallBuffersPolicyT::buff_delay_constructor>;
+
+  using BLevBlockScanPrefixCallbackOpT =
+    TilePrefixCallbackOp<BlockOffsetT,
+                         ::cuda::std::plus<>,
+                         BLevBlockOffsetTileState,
+                         typename AgentMemcpySmallBuffersPolicyT::block_delay_constructor>;
+
+  //-----------------------------------------------------------------------------
+  // SHARED MEMORY DECLARATIONS
+  //-----------------------------------------------------------------------------
+  struct _TempStorage
+  {
+    union
+    {
+      typename BufferLoadT::TempStorage load_storage;
+
+      // Stage 1: histogram over the size classes in preparation for partitioning buffers by size
+      typename BlockSizeClassScanT::TempStorage size_scan_storage;
+
+      // Stage 2: Communicate the number ofer buffers requiring block-level collaboration
+      typename BLevBuffScanPrefixCallbackOpT::TempStorage buffer_scan_callback;
+
+      // Stage 3; batch memcpy buffers that require only thread-level collaboration
+      struct
+      {
+        BufferTuple buffers_by_size_class[BUFFERS_PER_BLOCK];
+
+        // Stage 3.1: Write buffers requiring block-level collaboration to queue
+        union
+        {
+          struct
+          {
+            typename BLevBlockScanPrefixCallbackOpT::TempStorage block_scan_callback;
+            typename BlockBLevTileCountScanT::TempStorage block_scan_storage;
+          } blev;
+
+          // Stage 3.3: run-length decode & block exchange for tlev
+          // rld_state needs to be persistent across loop iterations (RunLengthDecode calls) and,
+          // hence, cannot alias block_exchange_storage
+          struct
+          {
+            typename BlockRunLengthDecodeT::TempStorage rld_state;
+            typename BlockExchangeTLevT::TempStorage block_exchange_storage;
+          } tlev;
+        };
+      } staged;
+    };
+    BufferOffsetT blev_buffer_offset;
+  };
+
+  //-----------------------------------------------------------------------------
+  // PUBLIC TYPE MEMBERS
+  //-----------------------------------------------------------------------------
+
+public:
+  struct TempStorage : Uninitialized<_TempStorage>
+  {};
+
+  //-----------------------------------------------------------------------------
+  // PRIVATE MEMBER FUNCTIONS
+  //-----------------------------------------------------------------------------
+
+private:
+  /// Shared storage reference
+  _TempStorage& temp_storage;
+
+  /**
+   * @brief Loads this tile's buffers' sizes, without any guards (i.e., out-of-bounds checks)
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE void
+  LoadBufferSizesFullTile(BufferSizeIteratorT tile_buffer_sizes_it, BufferSizeT (&buffer_sizes)[BUFFERS_PER_THREAD])
+  {
+    BufferLoadT(temp_storage.load_storage).Load(tile_buffer_sizes_it, buffer_sizes);
+  }
+
+  /**
+   * @brief Loads this tile's buffers' sizes, making sure to read at most \p num_valid items.
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE void LoadBufferSizesPartialTile(
+    BufferSizeIteratorT tile_buffer_sizes_it, BufferSizeT (&buffer_sizes)[BUFFERS_PER_THREAD], BufferOffsetT num_valid)
+  {
+    // Out-of-bounds buffer items are initialized to '0', so those buffers will simply be ignored
+    // later on
+    constexpr BufferSizeT OOB_DEFAULT_BUFFER_SIZE = 0U;
+
+    BufferLoadT(temp_storage.load_storage).Load(tile_buffer_sizes_it, buffer_sizes, num_valid, OOB_DEFAULT_BUFFER_SIZE);
+  }
+
+  /**
+   * @brief Computes the histogram over the number of buffers belonging to each of the three
+   * size-classes (TLEV, WLEV, BLEV).
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE VectorizedSizeClassCounterT
+  GetBufferSizeClassHistogram(const BufferSizeT (&buffer_sizes)[BUFFERS_PER_THREAD])
+  {
+    VectorizedSizeClassCounterT vectorized_counters{};
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < BUFFERS_PER_THREAD; i++)
+    {
+      // Whether to increment ANY of the buffer size classes at all
+      const uint32_t increment = buffer_sizes[i] > 0 ? 1U : 0U;
+      // Identify the buffer's size class
+      uint32_t buffer_size_class = 0;
+      buffer_size_class += buffer_sizes[i] > WARP_LEVEL_THRESHOLD ? 1U : 0U;
+      buffer_size_class += buffer_sizes[i] > BLOCK_LEVEL_THRESHOLD ? 1U : 0U;
+
+      // Increment the count of the respective size class
+      vectorized_counters.add(buffer_size_class, increment);
+    }
+    return vectorized_counters;
+  }
+
+  /**
+   * @brief Scatters the buffers into the respective buffer's size-class partition.
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE void PartitionBuffersBySize(
+    const BufferSizeT (&buffer_sizes)[BUFFERS_PER_THREAD],
+    VectorizedSizeClassCounterT& vectorized_offsets,
+    BufferTuple (&buffers_by_size_class)[BUFFERS_PER_BLOCK])
+  {
+    // If we intend to perform a stable partitioning, the thread's buffer are in a blocked
+    // arrangement, otherwise they are in a striped arrangement
+    BlockBufferOffsetT buffer_id = BUFFER_STABLE_PARTITION ? (BUFFERS_PER_THREAD * threadIdx.x) : (threadIdx.x);
+    constexpr BlockBufferOffsetT BUFFER_STRIDE =
+      BUFFER_STABLE_PARTITION ? static_cast<BlockBufferOffsetT>(1) : static_cast<BlockBufferOffsetT>(BLOCK_THREADS);
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < BUFFERS_PER_THREAD; i++)
+    {
+      if (buffer_sizes[i] > 0)
+      {
+        uint32_t buffer_size_class = 0;
+        buffer_size_class += buffer_sizes[i] > WARP_LEVEL_THRESHOLD ? 1U : 0U;
+        buffer_size_class += buffer_sizes[i] > BLOCK_LEVEL_THRESHOLD ? 1U : 0U;
+        const uint32_t write_offset         = vectorized_offsets.get(buffer_size_class);
+        buffers_by_size_class[write_offset] = {static_cast<TLevBufferSizeT>(buffer_sizes[i]), buffer_id};
+        vectorized_offsets.add(buffer_size_class, 1U);
+      }
+      buffer_id += BUFFER_STRIDE;
+    }
+  }
+
+  /**
+   * @brief Read in all the buffers that require block-level collaboration and put them to a queue
+   * that will get picked up in a separate, subsequent kernel.
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE void EnqueueBLEVBuffers(
+    BufferTuple* buffers_by_size_class,
+    InputBufferIt tile_buffer_srcs,
+    OutputBufferIt tile_buffer_dsts,
+    BufferSizeIteratorT tile_buffer_sizes,
+    BlockBufferOffsetT num_blev_buffers,
+    BufferOffsetT tile_buffer_offset,
+    BufferOffsetT tile_id)
+  {
+    BlockOffsetT block_offset[BLEV_BUFFERS_PER_THREAD];
+    // Read in the BLEV buffer partition (i.e., the buffers that require block-level collaboration)
+    uint32_t blev_buffer_offset = threadIdx.x * BLEV_BUFFERS_PER_THREAD;
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < BLEV_BUFFERS_PER_THREAD; i++)
+    {
+      if (blev_buffer_offset < num_blev_buffers)
+      {
+        BlockBufferOffsetT tile_buffer_id = buffers_by_size_class[blev_buffer_offset].buffer_id;
+        block_offset[i]                   = ::cuda::ceil_div(+tile_buffer_sizes[tile_buffer_id], BLOCK_LEVEL_TILE_SIZE);
+      }
+      else
+      {
+        // Out-of-bounds buffers are assigned a tile count of '0'
+        block_offset[i] = 0U;
+      }
+      blev_buffer_offset++;
+    }
+
+    if (tile_id == 0)
+    {
+      BlockOffsetT block_aggregate;
+      BlockBLevTileCountScanT(temp_storage.staged.blev.block_scan_storage)
+        .ExclusiveSum(block_offset, block_offset, block_aggregate);
+      if (threadIdx.x == 0)
+      {
+        blev_block_scan_state.SetInclusive(0, block_aggregate);
+      }
+    }
+    else
+    {
+      BLevBlockScanPrefixCallbackOpT blev_tile_prefix_op(
+        blev_block_scan_state, temp_storage.staged.blev.block_scan_callback, ::cuda::std::plus<>{}, tile_id);
+      BlockBLevTileCountScanT(temp_storage.staged.blev.block_scan_storage)
+        .ExclusiveSum(block_offset, block_offset, blev_tile_prefix_op);
+    }
+    __syncthreads();
+
+    // Read in the BLEV buffer partition (i.e., the buffers that require block-level collaboration)
+    blev_buffer_offset = threadIdx.x * BLEV_BUFFERS_PER_THREAD;
+
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < BLEV_BUFFERS_PER_THREAD; i++)
+    {
+      if (blev_buffer_offset < num_blev_buffers)
+      {
+        BlockBufferOffsetT tile_buffer_id                         = buffers_by_size_class[blev_buffer_offset].buffer_id;
+        blev_buffer_srcs[tile_buffer_offset + blev_buffer_offset] = tile_buffer_srcs[tile_buffer_id];
+        blev_buffer_dsts[tile_buffer_offset + blev_buffer_offset] = tile_buffer_dsts[tile_buffer_id];
+        blev_buffer_sizes[tile_buffer_offset + blev_buffer_offset]        = tile_buffer_sizes[tile_buffer_id];
+        blev_buffer_tile_offsets[tile_buffer_offset + blev_buffer_offset] = block_offset[i];
+        blev_buffer_offset++;
+      }
+    }
+  }
+
+  /**
+   * @brief Read in all the buffers of this tile that require warp-level collaboration and copy
+   * their bytes to the corresponding destination buffer
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE void BatchMemcpyWLEVBuffers(
+    BufferTuple* buffers_by_size_class,
+    InputBufferIt tile_buffer_srcs,
+    OutputBufferIt tile_buffer_dsts,
+    BufferSizeIteratorT tile_buffer_sizes,
+    BlockBufferOffsetT num_wlev_buffers)
+  {
+    const int32_t warp_id              = threadIdx.x / warp_threads;
+    constexpr uint32_t warps_per_block = BLOCK_THREADS / warp_threads;
+
+    for (BlockBufferOffsetT buffer_offset = warp_id; buffer_offset < num_wlev_buffers; buffer_offset += warps_per_block)
+    {
+      const auto buffer_id = buffers_by_size_class[buffer_offset].buffer_id;
+      copy_items<IsMemcpy, warp_threads, InputBufferT, OutputBufferT, BufferSizeT>(
+        tile_buffer_srcs[buffer_id], tile_buffer_dsts[buffer_id], tile_buffer_sizes[buffer_id]);
+    }
+  }
+
+  /**
+   * @brief Read in all the buffers of this tile that require thread-level collaboration and copy
+   * their bytes to the corresponding destination buffer
+   */
+  _CCCL_DEVICE _CCCL_FORCEINLINE void BatchMemcpyTLEVBuffers(
+    BufferTuple* buffers_by_size_class,
+    InputBufferIt tile_buffer_srcs,
+    OutputBufferIt tile_buffer_dsts,
+    BlockBufferOffsetT num_tlev_buffers)
+  {
+    // Read in the buffers' ids that require thread-level collaboration (where buffer id is the
+    // buffer within this tile)
+    BlockBufferOffsetT tlev_buffer_ids[TLEV_BUFFERS_PER_THREAD];
+    TLevBufferSizeT tlev_buffer_sizes[TLEV_BUFFERS_PER_THREAD];
+    // Currently we do not go over the TLEV buffers in multiple iterations, so we need to make sure
+    // we are able to be covered for the case that all our buffers are TLEV buffers
+    static_assert(TLEV_BUFFERS_PER_THREAD >= BUFFERS_PER_THREAD,
+                  "Unsupported confiugraiton: The number of 'thread-level buffers' must be at "
+                  "least as large as the number of overall buffers being processed by each "
+                  "thread.");
+
+    // Read in the TLEV buffer partition (i.e., the buffers that require thread-level collaboration)
+    uint32_t tlev_buffer_offset = threadIdx.x * TLEV_BUFFERS_PER_THREAD;
+
+    // Pre-populate the buffer sizes to 0 (i.e. zero-padding towards the end) to ensure
+    // out-of-bounds TLEV buffers will not be considered
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < TLEV_BUFFERS_PER_THREAD; i++)
+    {
+      tlev_buffer_sizes[i] = 0;
+    }
+
+    // Assign TLEV buffers in a blocked arrangement (each thread is assigned consecutive TLEV
+    // buffers)
+    _CCCL_PRAGMA_UNROLL_FULL()
+    for (uint32_t i = 0; i < TLEV_BUFFERS_PER_THREAD; i++)
+    {
+      if (tlev_buffer_offset < num_tlev_buffers)
+      {
+        tlev_buffer_ids[i]   = buffers_by_size_class[tlev_buffer_offset].buffer_id;
+        tlev_buffer_sizes[i] = buffers_by_size_class[tlev_buffer_offset].size;
+      }
+      tlev_buffer_offset++;
+    }
+
+    // Evenly distribute all the bytes that have to be copied from all the buffers that require
+    // thread-level collaboration using BlockRunLengthDecode
+    uint32_t num_total_tlev_bytes = 0U;
+    BlockRunLengthDecodeT block_run_length_decode(
+      temp_storage.staged.tlev.rld_state, tlev_buffer_ids, tlev_buffer_sizes, num_total_tlev_bytes);
+
+    // Run-length decode the buffers' sizes into a window buffer of limited size. This is repeated
+    // until we were able to cover all the bytes of TLEV buffers
+    uint32_t decoded_window_offset = 0U;
+    while (decoded_window_offset < num_total_tlev_bytes)
+    {
+      BlockBufferOffsetT buffer_id[TLEV_BYTES_PER_THREAD];
+      TLevBufferSizeT buffer_byte_offset[TLEV_BYTES_PER_THREAD];
+
+      // Now we have a balanced assignment: buffer_id[i] will hold the tile's buffer id and
+      // buffer_byte_offset[i] that buffer's byte that this thread supposed to copy
+      block_run_length_decode.RunLengthDecode(buffer_id, buffer_byte_offset, decoded_window_offset);
+
+      // Zip from SoA to AoS
+      ZippedTLevByteAssignment zipped_byte_assignment[TLEV_BYTES_PER_THREAD];
+
+      _CCCL_PRAGMA_UNROLL_FULL()
+      for (int32_t i = 0; i < TLEV_BYTES_PER_THREAD; i++)
+      {
+        zipped_byte_assignment[i] = {buffer_id[i], buffer_byte_offset[i]};
+      }
+
+      // Exchange from blocked to striped arrangement for coalesced memory reads and writes
+      BlockExchangeTLevT(temp_storage.staged.tlev.block_exchange_storage)
+        .BlockedToStriped(zipped_byte_assignment, zipped_byte_assignment);
+
+      // Read in the bytes that this thread is assigned to
+      constexpr uint32_t WINDOW_SIZE = (TLEV_BYTES_PER_THREAD * BLOCK_THREADS);
+      const bool is_full_window      = decoded_window_offset + WINDOW_SIZE < num_total_tlev_bytes;
+      if (is_full_window)
+      {
+        uint32_t absolute_tlev_byte_offset = decoded_window_offset + threadIdx.x;
+        AliasT src_byte[TLEV_BYTES_PER_THREAD];
+
+        _CCCL_PRAGMA_UNROLL_FULL()
+        for (int32_t i = 0; i < TLEV_BYTES_PER_THREAD; i++)
+        {
+          src_byte[i] = read_item<IsMemcpy, AliasT, InputBufferT>(
+            tile_buffer_srcs[zipped_byte_assignment[i].tile_buffer_id], zipped_byte_assignment[i].buffer_byte_offset);
+          absolute_tlev_byte_offset += BLOCK_THREADS;
+        }
+
+        _CCCL_PRAGMA_UNROLL_FULL()
+        for (int32_t i = 0; i < TLEV_BYTES_PER_THREAD; i++)
+        {
+          write_item<IsMemcpy, AliasT, OutputBufferT>(
+            tile_buffer_dsts[zipped_byte_assignment[i].tile_buffer_id],
+            zipped_byte_assignment[i].buffer_byte_offset,
+            src_byte[i]);
+        }
+      }
+      else
+      {
+        uint32_t absolute_tlev_byte_offset = decoded_window_offset + threadIdx.x;
+
+        _CCCL_PRAGMA_UNROLL_FULL()
+        for (int32_t i = 0; i < TLEV_BYTES_PER_THREAD; i++)
+        {
+          if (absolute_tlev_byte_offset < num_total_tlev_bytes)
+          {
+            const AliasT src_byte = read_item<IsMemcpy, AliasT, InputBufferT>(
+              tile_buffer_srcs[zipped_byte_assignment[i].tile_buffer_id], zipped_byte_assignment[i].buffer_byte_offset);
+            write_item<IsMemcpy, AliasT, OutputBufferT>(
+              tile_buffer_dsts[zipped_byte_assignment[i].tile_buffer_id],
+              zipped_byte_assignment[i].buffer_byte_offset,
+              src_byte);
+          }
+          absolute_tlev_byte_offset += BLOCK_THREADS;
+        }
+      }
+
+      decoded_window_offset += WINDOW_SIZE;
+
+      // Ensure all threads finished collaborative BlockExchange so temporary storage can be reused
+      // with next iteration
+      __syncthreads();
+    }
+  }
+
+  //-----------------------------------------------------------------------------
+  // PUBLIC MEMBER FUNCTIONS
+  //-----------------------------------------------------------------------------
+
+public:
+  _CCCL_DEVICE _CCCL_FORCEINLINE void ConsumeTile(BufferOffsetT tile_id)
+  {
+    // Offset into this tile's buffers
+    BufferOffsetT buffer_offset = tile_id * BUFFERS_PER_BLOCK;
+
+    // Indicates whether all of this tiles items are within bounds
+    bool is_full_tile = buffer_offset + BUFFERS_PER_BLOCK < num_buffers;
+
+    // Load the buffer sizes of this tile's buffers
+    BufferSizeIteratorT tile_buffer_sizes_it = buffer_sizes_it + buffer_offset;
+    BufferSizeT buffer_sizes[BUFFERS_PER_THREAD];
+    if (is_full_tile)
+    {
+      LoadBufferSizesFullTile(tile_buffer_sizes_it, buffer_sizes);
+    }
+    else
+    {
+      LoadBufferSizesPartialTile(tile_buffer_sizes_it, buffer_sizes, num_buffers - buffer_offset);
+    }
+
+    // Ensure we can repurpose the BlockLoad's temporary storage
+    __syncthreads();
+
+    // Count how many buffers fall into each size-class
+    VectorizedSizeClassCounterT size_class_histogram = GetBufferSizeClassHistogram(buffer_sizes);
+
+    // Compute the prefix sum over the histogram
+    VectorizedSizeClassCounterT size_class_agg = {};
+    BlockSizeClassScanT(temp_storage.size_scan_storage)
+      .ExclusiveSum(size_class_histogram, size_class_histogram, size_class_agg);
+
+    // Ensure we can repurpose the scan's temporary storage for scattering the buffer ids
+    __syncthreads();
+
+    // Factor in the per-size-class counts / offsets
+    // That is, WLEV buffer offset has to be offset by the TLEV buffer count and BLEV buffer offset
+    // has to be offset by the TLEV+WLEV buffer count
+    uint32_t buffer_count = 0U;
+    for (uint32_t i = 0; i < NUM_SIZE_CLASSES; i++)
+    {
+      size_class_histogram.add(i, buffer_count);
+      buffer_count += size_class_agg.get(i);
+    }
+
+    // Signal the number of BLEV buffers we're planning to write out
+    BufferOffsetT buffer_exclusive_prefix = 0;
+    if (tile_id == 0)
+    {
+      if (threadIdx.x == 0)
+      {
+        blev_buffer_scan_state.SetInclusive(tile_id, size_class_agg.get(BLEV_SIZE_CLASS));
+      }
+      buffer_exclusive_prefix = 0;
+    }
+    else
+    {
+      BLevBuffScanPrefixCallbackOpT blev_buffer_prefix_op(
+        blev_buffer_scan_state, temp_storage.buffer_scan_callback, ::cuda::std::plus<>{}, tile_id);
+
+      // Signal our partial prefix and wait for the inclusive prefix of previous tiles
+      if (threadIdx.x < warp_threads)
+      {
+        buffer_exclusive_prefix = blev_buffer_prefix_op(size_class_agg.get(BLEV_SIZE_CLASS));
+      }
+    }
+    if (threadIdx.x == 0)
+    {
+      temp_storage.blev_buffer_offset = buffer_exclusive_prefix;
+    }
+
+    // Ensure the prefix callback has finished using its temporary storage and that it can be reused
+    // in the next stage
+    __syncthreads();
+
+    // Scatter the buffers into one of the three partitions (TLEV, WLEV, BLEV) depending on their
+    // size
+    PartitionBuffersBySize(buffer_sizes, size_class_histogram, temp_storage.staged.buffers_by_size_class);
+
+    // Ensure all buffers have been partitioned by their size class AND
+    // ensure that blev_buffer_offset has been written to shared memory
+    __syncthreads();
+
+    // TODO: think about prefetching tile_buffer_{srcs,dsts} into shmem
+    InputBufferIt tile_buffer_srcs        = input_buffer_it + buffer_offset;
+    OutputBufferIt tile_buffer_dsts       = output_buffer_it + buffer_offset;
+    BufferSizeIteratorT tile_buffer_sizes = buffer_sizes_it + buffer_offset;
+
+    // Copy block-level buffers
+    EnqueueBLEVBuffers(
+      &temp_storage.staged
+         .buffers_by_size_class[size_class_agg.get(TLEV_SIZE_CLASS) + size_class_agg.get(WLEV_SIZE_CLASS)],
+      tile_buffer_srcs,
+      tile_buffer_dsts,
+      tile_buffer_sizes,
+      size_class_agg.get(BLEV_SIZE_CLASS),
+      temp_storage.blev_buffer_offset,
+      tile_id);
+
+    // Ensure we can repurpose the temporary storage required by EnqueueBLEVBuffers
+    __syncthreads();
+
+    // Copy warp-level buffers
+    BatchMemcpyWLEVBuffers(
+      &temp_storage.staged.buffers_by_size_class[size_class_agg.get(TLEV_SIZE_CLASS)],
+      tile_buffer_srcs,
+      tile_buffer_dsts,
+      tile_buffer_sizes,
+      size_class_agg.get(WLEV_SIZE_CLASS));
+
+    // Perform batch memcpy for all the buffers that require thread-level collaboration
+    uint32_t num_tlev_buffers = size_class_agg.get(TLEV_SIZE_CLASS);
+    BatchMemcpyTLEVBuffers(
+      temp_storage.staged.buffers_by_size_class, tile_buffer_srcs, tile_buffer_dsts, num_tlev_buffers);
+  }
+
+  //-----------------------------------------------------------------------------
+  // CONSTRUCTOR
+  //-----------------------------------------------------------------------------
+  _CCCL_DEVICE _CCCL_FORCEINLINE AgentBatchMemcpy(
+    TempStorage& temp_storage,
+    InputBufferIt input_buffer_it,
+    OutputBufferIt output_buffer_it,
+    BufferSizeIteratorT buffer_sizes_it,
+    BufferOffsetT num_buffers,
+    BlevBufferSrcsOutItT blev_buffer_srcs,
+    BlevBufferDstsOutItT blev_buffer_dsts,
+    BlevBufferSizesOutItT blev_buffer_sizes,
+    BlevBufferTileOffsetsOutItT blev_buffer_tile_offsets,
+    BLevBufferOffsetTileState blev_buffer_scan_state,
+    BLevBlockOffsetTileState blev_block_scan_state)
+      : temp_storage(temp_storage.Alias())
+      , input_buffer_it(input_buffer_it)
+      , output_buffer_it(output_buffer_it)
+      , buffer_sizes_it(buffer_sizes_it)
+      , num_buffers(num_buffers)
+      , blev_buffer_srcs(blev_buffer_srcs)
+      , blev_buffer_dsts(blev_buffer_dsts)
+      , blev_buffer_sizes(blev_buffer_sizes)
+      , blev_buffer_tile_offsets(blev_buffer_tile_offsets)
+      , blev_buffer_scan_state(blev_buffer_scan_state)
+      , blev_block_scan_state(blev_block_scan_state)
+  {}
+
+private:
+  // Iterator providing the pointers to the source memory buffers
+  InputBufferIt input_buffer_it;
+  // Iterator providing the pointers to the destination memory buffers
+  OutputBufferIt output_buffer_it;
+  // Iterator providing the number of bytes to be copied for each pair of buffers
+  BufferSizeIteratorT buffer_sizes_it;
+  // The total number of buffer pairs
+  BufferOffsetT num_buffers;
+  // Output iterator to which the source pointers of the BLEV buffers are written
+  BlevBufferSrcsOutItT blev_buffer_srcs;
+  // Output iterator to which the destination pointers of the BLEV buffers are written
+  BlevBufferDstsOutItT blev_buffer_dsts;
+  // Output iterator to which the number of bytes to be copied of the BLEV buffers are written
+  BlevBufferSizesOutItT blev_buffer_sizes;
+  // Output iterator to which the mapping of tiles to BLEV buffers is written
+  BlevBufferTileOffsetsOutItT blev_buffer_tile_offsets;
+  // The single-pass prefix scan's tile state used for tracking the prefix sum over the number of
+  // BLEV buffers
+  BLevBufferOffsetTileState blev_buffer_scan_state;
+  // The single-pass prefix scan's tile state used for tracking the prefix sum over tiles of BLEV
+  // buffers
+  BLevBlockOffsetTileState blev_block_scan_state;
+};
+} // namespace detail::batch_memcpy
+
+CUB_NAMESPACE_END