ansys-fluent-core 0.33.dev0__py3-none-any.whl → 0.33.1__py3-none-any.whl

ansys/fluent/core/generated/datamodel_261/meshing.py

@@ -1302,10 +1302,10 @@ class Root(PyMenu):
                         self.ConnectLabelWildcard = self._ConnectLabelWildcard(self, "ConnectLabelWildcard", service, rules, path)
                         self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
                         self.RelativeShareTopologyTolerance = self._RelativeShareTopologyTolerance(self, "RelativeShareTopologyTolerance", service, rules, path)
-                        self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
+                        self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                         self.ExecuteJoinIntersect = self._ExecuteJoinIntersect(self, "ExecuteJoinIntersect", service, rules, path)
                         self.Operation = self._Operation(self, "Operation", service, rules, path)
-                        self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
+                        self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
                         self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
                         self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
                         self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
@@ -1338,9 +1338,9 @@ class Root(PyMenu):
                         Specify the relative tolerance for joining or intersecting face pairs, or the relative tolerance for connecting edge and face pairs.
                         """
 
-                    class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
+                    class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
                         """
-                        Specify the threshold angle for joining face pairs.
+                        Argument FluidLabelWildcard.
                         """
 
                     class _ExecuteJoinIntersect(PyTextualCommandArgumentsSubItem):
@@ -1353,9 +1353,9 @@ class Root(PyMenu):
                         Choose whether to apply share topology using the Join-Intersect method where you join and/or intersect the problematic faces, or using the Interface Connect method where you connect edges of overlapping face pairs. Note that imprinting of overlapping faces in SCDM/Discovery is highly recommended for the Interface Connect method.
                         """
 
-                    class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
+                    class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
                         """
-                        Argument FluidLabelWildcard.
+                        Specify the threshold angle for joining face pairs.
                         """
 
                     class _STToleranceIncrement(PyNumericalCommandArgumentsSubItem):
@@ -1526,8 +1526,8 @@ class Root(PyMenu):
                     self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
@@ -1551,14 +1551,14 @@ class Root(PyMenu):
                     Argument MinAspectRatio.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument LastRatioNumLayers.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Argument LastRatioPercentage.
                     """
 
                 class _GapFactor(PyNumericalCommandArgumentsSubItem):
@@ -1772,9 +1772,9 @@ class Root(PyMenu):
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
-                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
-                    self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
                     self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
+                    self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
+                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
                     self.IgnoreBoundaryLayers = self._IgnoreBoundaryLayers(self, "IgnoreBoundaryLayers", service, rules, path)
@@ -1819,9 +1819,9 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
                     """
 
                 class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
@@ -1829,9 +1829,9 @@ class Root(PyMenu):
                     Display advanced options that you may want to apply to this task.
                     """
 
-                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
+                    Argument LastRatioNumLayers.
                     """
 
                 class _AllowedTangencyAtInvalidNormals(PyNumericalCommandArgumentsSubItem):
@@ -2090,12 +2090,12 @@ class Root(PyMenu):
                     self.SphereRadiusFactorAtInvalidNormals = self._SphereRadiusFactorAtInvalidNormals(self, "SphereRadiusFactorAtInvalidNormals", service, rules, path)
                     self.SmoothRingsAtInvalidNormals = self._SmoothRingsAtInvalidNormals(self, "SmoothRingsAtInvalidNormals", service, rules, path)
                     self.Continuous = self._Continuous(self, "Continuous", service, rules, path)
-                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
+                    self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
+                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
                     self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
-                    self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
                     self.IgnoreBoundaryLayers = self._IgnoreBoundaryLayers(self, "IgnoreBoundaryLayers", service, rules, path)
@@ -2125,14 +2125,14 @@ class Root(PyMenu):
                     Specify how you would like to improve the generated boundary layer: as a continuous or stair-stepped boundary layer in the specified area(s).
                     """
 
-                class _SplitPrism(PyTextualCommandArgumentsSubItem):
+                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
+                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
                     """
 
-                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
+                class _SplitPrism(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
+                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
                     """
 
                 class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
@@ -2140,6 +2140,11 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument LastRatioNumLayers.
+                    """
+
                 class _ShowLocalPrismPreferences(PyParameterCommandArgumentsSubItem):
                     """
                     Display advanced options that you may want to apply to this task.
@@ -2150,11 +2155,6 @@ class Root(PyMenu):
                     Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument LastRatioNumLayers.
-                    """
-
                 class _AllowedTangencyAtInvalidNormals(PyNumericalCommandArgumentsSubItem):
                     """
                     Controls the tangency of the invalid normal faces. An invalid normal location with all 90 degree angles has a tangency of 1. So, faces are still treated as an invalid normal even if the angle deviates slightly from 90 degrees (resulting in a tangency of 0.98).
@@ -2395,11 +2395,11 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
+                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
-                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
+                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
                     self.GrowthRate = self._GrowthRate(self, "GrowthRate", service, rules, path)
 
@@ -2448,14 +2448,14 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
-                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
+                class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
-                    Enable this field to display the initial size control in the graphics window.
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
+                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    Enable this field to display the initial size control in the graphics window.
                     """
 
                 class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -2463,14 +2463,14 @@ class Root(PyMenu):
                     Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
-                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
+                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
                     """
 
-                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
+                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
                     """
 
                 class _TargetSizeControl(PyParameterCommandArgumentsSubItem):
@@ -3249,8 +3249,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
                     self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
+                    self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
@@ -3258,14 +3258,14 @@ class Root(PyMenu):
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
-                class _ExposeSide(PyTextualCommandArgumentsSubItem):
+                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExposeSide.
+                    Argument ShowShellBLAdvancedOptions.
                     """
 
-                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _ExposeSide(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowShellBLAdvancedOptions.
+                    Argument ExposeSide.
                     """
 
                 class _MaxAspectRatio(PyNumericalCommandArgumentsSubItem):
@@ -4164,14 +4164,14 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.TargeSizeFieldFileName = self._TargeSizeFieldFileName(self, "TargeSizeFieldFileName", service, rules, path)
                     self.WrapTargetSizeFieldRatio = self._WrapTargetSizeFieldRatio(self, "WrapTargetSizeFieldRatio", service, rules, path)
-                    self.WrapTargetBothOptions = self._WrapTargetBothOptions(self, "WrapTargetBothOptions", service, rules, path)
+                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
                     self.SolidFluidRaio = self._SolidFluidRaio(self, "SolidFluidRaio", service, rules, path)
                     self.BoundaryLayers = self._BoundaryLayers(self, "BoundaryLayers", service, rules, path)
                     self.EdgeProximityComputation = self._EdgeProximityComputation(self, "EdgeProximityComputation", service, rules, path)
-                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.ExistingSizeField = self._ExistingSizeField(self, "ExistingSizeField", service, rules, path)
-                    self.TargetSizeFieldFileName = self._TargetSizeFieldFileName(self, "TargetSizeFieldFileName", service, rules, path)
+                    self.WrapTargetBothOptions = self._WrapTargetBothOptions(self, "WrapTargetBothOptions", service, rules, path)
                     self.SolidFluidRatio = self._SolidFluidRatio(self, "SolidFluidRatio", service, rules, path)
+                    self.TargetSizeFieldFileName = self._TargetSizeFieldFileName(self, "TargetSizeFieldFileName", service, rules, path)
+                    self.ExistingSizeField = self._ExistingSizeField(self, "ExistingSizeField", service, rules, path)
                     self.WrapSizeFieldFileName = self._WrapSizeFieldFileName(self, "WrapSizeFieldFileName", service, rules, path)
                     self.WrapTargetRatio = self._WrapTargetRatio(self, "WrapTargetRatio", service, rules, path)
                     self.WrapTargetRaio = self._WrapTargetRaio(self, "WrapTargetRaio", service, rules, path)
@@ -4186,9 +4186,9 @@ class Root(PyMenu):
                     The ratio of the initial wrap size field and the local target size field.
                     """
 
-                class _WrapTargetBothOptions(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Determine how the size controls are calculated in the Add Local Sizing task: using Both Wrap and Target values, by Target Only (the default), or by Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _SolidFluidRaio(PyNumericalCommandArgumentsSubItem):
@@ -4206,14 +4206,14 @@ class Root(PyMenu):
                     For geometries having a very large number of small feature edges, select Yes to speed up the calculation and reduce memory requirements when using a proximity size function.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _WrapTargetBothOptions(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Determine how the size controls are calculated in the Add Local Sizing task: using Both Wrap and Target values, by Target Only (the default), or by Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
                     """
 
-                class _ExistingSizeField(PyTextualCommandArgumentsSubItem):
+                class _SolidFluidRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Determine which existing size field files will be used: Both Wrap and Target (the default), Target Only, or Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
+                    Argument SolidFluidRatio.
                     """
 
                 class _TargetSizeFieldFileName(PyTextualCommandArgumentsSubItem):
@@ -4221,9 +4221,9 @@ class Root(PyMenu):
                     Argument TargetSizeFieldFileName.
                     """
 
-                class _SolidFluidRatio(PyNumericalCommandArgumentsSubItem):
+                class _ExistingSizeField(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SolidFluidRatio.
+                    Determine which existing size field files will be used: Both Wrap and Target (the default), Target Only, or Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
                     """
 
                 class _WrapSizeFieldFileName(PyTextualCommandArgumentsSubItem):
@@ -4508,7 +4508,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -4519,16 +4519,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Argument SizeRelativeLength.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument XmaxRatio.
+                    Argument Xmax.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -4581,9 +4581,9 @@ class Root(PyMenu):
                     Argument ZmaxRatio.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Xmax.
+                    Argument XmaxRatio.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -4598,16 +4598,16 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
-                    self.X = self._X(self, "X", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.X = self._X(self, "X", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
@@ -4639,19 +4639,19 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument WakeGrowthFactor.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument AspectRatio.
                     """
 
                 class _Rate(PyNumericalCommandArgumentsSubItem):
@@ -4674,19 +4674,19 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument NumberOfLayers.
                     """
 
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X.
+                    Argument LastRatioPercentage.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument X.
                     """
 
                 class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
@@ -4732,15 +4732,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -4774,9 +4774,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -4784,9 +4784,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -4804,9 +4804,9 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument X2.
                     """
 
                 class _Node2(PyTextualCommandArgumentsSubItem):
@@ -4814,9 +4814,9 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X2.
+                    Argument Y-Offset.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -5095,7 +5095,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -5106,16 +5106,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Argument SizeRelativeLength.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the x-coordinate of the offset collar mesh.
+                    Argument XmaxRatio.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -5168,9 +5168,9 @@ class Root(PyMenu):
                     Argument ZmaxRatio.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument XmaxRatio.
+                    Specify the x-coordinate of the offset collar mesh.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -5186,17 +5186,17 @@ class Root(PyMenu):
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
-                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -5231,9 +5231,9 @@ class Root(PyMenu):
                     Argument AspectRatio.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument NumberOfLayers.
                     """
 
                 class _Rate(PyNumericalCommandArgumentsSubItem):
@@ -5261,9 +5261,9 @@ class Root(PyMenu):
                     Choose a single edge zone from the list below for your edge-based collar mesh. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument WakeGrowthFactor.
                     """
 
                 class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
@@ -5276,14 +5276,14 @@ class Root(PyMenu):
                     Specify the x-coordinate of the offset collar mesh.
                     """
 
-                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument OffsetMethodType.
+                    Argument FlipDirection.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Argument OffsetMethodType.
                     """
 
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
@@ -5319,15 +5319,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -5361,9 +5361,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -5371,9 +5371,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -5396,14 +5396,14 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Node2(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X2.
+                    Argument Node2.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Node2.
+                    Argument X2.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -5460,8 +5460,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
+                    self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
@@ -5479,14 +5479,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -5683,7 +5683,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -5694,16 +5694,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the component mesh as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -5756,9 +5756,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -5773,14 +5773,14 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
@@ -5814,19 +5814,19 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the ratio of the prism base length to the prism layer height.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Specify the rate of growth of the boundary layer.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the rate of growth of the boundary layer.
+                    Specify the ratio of the prism base length to the prism layer height.
                     """
 
                 class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
@@ -5849,9 +5849,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument WakeGrowthFactor.
                     """
 
                 class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
@@ -5901,8 +5901,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
@@ -5913,20 +5913,20 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -5979,11 +5979,6 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument X2.
-                    """
-
                 class _Node2(PyTextualCommandArgumentsSubItem):
                     """
                     Argument Node2.
@@ -5994,6 +5989,11 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
+                class _X2(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument X2.
+                    """
+
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -6051,15 +6051,15 @@ class Root(PyMenu):
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
+                    self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -6082,9 +6082,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -6092,9 +6092,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -6117,14 +6117,14 @@ class Root(PyMenu):
                     Argument BoxCenterX.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderRadius2.
+                    Argument BoxCenterZ.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxCenterZ.
+                    Argument CylinderRadius2.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -6891,7 +6891,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6902,16 +6902,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the refinement region as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6964,9 +6964,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -6981,18 +6981,18 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
-                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -7022,14 +7022,14 @@ class Root(PyMenu):
                     Specify a value that is used to obtain a rough shape of the selected object(s). The larger the value, the more approximate the shape.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Specify the number of boundary layers that are to be captured in the refinement region.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Specify the factor by which the refinement region expands in the wake of the flow direction.
                     """
 
                 class _Rate(PyNumericalCommandArgumentsSubItem):
@@ -7037,9 +7037,9 @@ class Root(PyMenu):
                     Argument Rate.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of boundary layers that are to be captured in the refinement region.
+                    Argument AspectRatio.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -7057,14 +7057,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the factor by which the refinement region expands in the wake of the flow direction.
-                    """
-
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument NumberOfLayers.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -7072,9 +7067,9 @@ class Root(PyMenu):
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Reverses the orientation of the refinement region.
+                    Argument LastRatioPercentage.
                     """
 
                 class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
@@ -7082,6 +7077,11 @@ class Root(PyMenu):
                     Argument OffsetMethodType.
                     """
 
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                    """
+                    Reverses the orientation of the refinement region.
+                    """
+
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument FirstHeight.
@@ -7115,15 +7115,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z1 = self._Z1(self, "Z1", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -7157,9 +7157,9 @@ class Root(PyMenu):
                     Specify the Z-coordinate for the offset of the initial position of the cylinder.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate of the second position of the cylinder.
+                    Specify the Z-coordinate of the first position of the cylinder.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -7167,9 +7167,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate of the first position of the cylinder.
+                    Specify the Z-coordinate of the second position of the cylinder.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -7187,11 +7187,6 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
-                    """
-                    Argument Node2.
-                    """
-
                 class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
                     Specify the Y-coordinate for the offset of the initial position of the cylinder.
@@ -7202,6 +7197,11 @@ class Root(PyMenu):
                     Specify the X-coordinate of the second position of the cylinder.
                     """
 
+                class _Node2(PyTextualCommandArgumentsSubItem):
+                    """
+                    Argument Node2.
+                    """
+
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -7259,15 +7259,15 @@ class Root(PyMenu):
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
                     self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
+                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -7290,9 +7290,9 @@ class Root(PyMenu):
                     Specify the X-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -7300,9 +7300,9 @@ class Root(PyMenu):
                     Specify the Y-coordinate of the first position of the cylinder.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -7325,14 +7325,14 @@ class Root(PyMenu):
                     Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
+                    Specify the radius of the cylinder at the second position.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the radius of the cylinder at the second position.
+                    Specify the Z-coordinate for the initial position of the cylindrical refinement region.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -7538,8 +7538,8 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.LabelSelectionList = self._LabelSelectionList(self, "LabelSelectionList", service, rules, path)
-                    self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
                     self.ZoneSelectionList = self._ZoneSelectionList(self, "ZoneSelectionList", service, rules, path)
+                    self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
                     self.Thickness = self._Thickness(self, "Thickness", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
@@ -7558,14 +7558,14 @@ class Root(PyMenu):
                     Select a single label that will correspond to the porous region. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _SelectionType(PyTextualCommandArgumentsSubItem):
+                class _ZoneSelectionList(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose how you want to make your selection (by object, zone, or label).
+                    Choose a single face zone from the list below. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _ZoneSelectionList(PyTextualCommandArgumentsSubItem):
+                class _SelectionType(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose a single face zone from the list below. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Choose how you want to make your selection (by object, zone, or label).
                     """
 
                 class _Thickness(PyNumericalCommandArgumentsSubItem):
@@ -7913,8 +7913,8 @@ class Root(PyMenu):
                     self.PorousRegions = self._PorousRegions(self, "PorousRegions", service, rules, path)
                     self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
                     self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
-                    self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
                     self.ExtractEdgeFeatures = self._ExtractEdgeFeatures(self, "ExtractEdgeFeatures", service, rules, path)
                     self.MovingObjects = self._MovingObjects(self, "MovingObjects", service, rules, path)
                     self.EnablePrimeWrapper = self._EnablePrimeWrapper(self, "EnablePrimeWrapper", service, rules, path)
@@ -7936,14 +7936,14 @@ class Root(PyMenu):
                     Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
                     """
 
-                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
+                    Display advanced options that you may want to apply to the workflow.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the workflow.
+                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
                     """
 
                 class _ExtractEdgeFeatures(PyTextualCommandArgumentsSubItem):
@@ -8456,18 +8456,18 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.MergeEdgeZonesBasedOnLabels = self._MergeEdgeZonesBasedOnLabels(self, "MergeEdgeZonesBasedOnLabels", service, rules, path)
+                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.ShowAdvancedOptions = self._ShowAdvancedOptions(self, "ShowAdvancedOptions", service, rules, path)
 
-                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeFaceZonesBasedOnLabels.
+                    Argument MergeEdgeZonesBasedOnLabels.
                     """
 
-                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeEdgeZonesBasedOnLabels.
+                    Argument MergeFaceZonesBasedOnLabels.
                     """
 
                 class _ShowAdvancedOptions(PyParameterCommandArgumentsSubItem):
@@ -9168,8 +9168,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -9199,14 +9199,14 @@ class Root(PyMenu):
                     Set proximity based refinement. Edges considers edge-to-edge proximity, while Faces considers face-to-face proximity, and Faces and Edges considers both.  More...
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Enable this option to visualize the size field in the graphics window.
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.  More...
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.  More...
+                    Enable this option to visualize the size field in the graphics window.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -9307,21 +9307,22 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
-                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
+                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
                     self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
-                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
+                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
-                    self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.ParallelRegionCompute = self._ParallelRegionCompute(self, "ParallelRegionCompute", service, rules, path)
                     self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
                     self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -9329,9 +9330,9 @@ class Root(PyMenu):
                     Specify the limiting skewness value for cell collapse to improve the mesh. If any remaining triangles are above this limit, these triangles will be aggressively removed using a fixed maximum angle of 120 degrees.
                     """
 
-                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
+                    Argument AutoMerge.
                     """
 
                 class _SMSeparation(PyTextualCommandArgumentsSubItem):
@@ -9339,19 +9340,19 @@ class Root(PyMenu):
                     Choose whether or not to separate zones. This is required to select faces for capping. If Named Selections have already been defined at these locations, then separation is not needed. Performance may be improved if this is disabled.
                     """
 
-                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Specify a desired angle for determining separation. Assigning a smaller separation angle will produce more zones.
                     """
 
-                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
+                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
+                    Specify the value limiting when folded faces are smoothed or resolved. Folded faces are resolved while under this limit. Set this value to 0 if the number of free nodes (due to a zero-thickness wall such as a baffle for instance) falls below 10.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Choose whether or not to apply quality measures during surface mesh generation. You should disable this option when using Multizone meshing of very thin structures, relative to the minimum size.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -9359,9 +9360,9 @@ class Root(PyMenu):
                     If your geometry contains small edges, you can choose to extract these edge features when generating the surface mesh by selecting yes. Note that selecting yes , will always extract small edge features regardless of your selection for the Auto Remesh to Remove Clustering? option.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify a desired angle for determining separation. Assigning a smaller separation angle will produce more zones.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -9374,9 +9375,14 @@ class Root(PyMenu):
                     Specify the width of the step that you wish to remove.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _ParallelRegionCompute(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the maximum size of the elements for the surface mesh.
+                    Argument ParallelRegionCompute.
+                    """
+
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -9384,14 +9390,14 @@ class Root(PyMenu):
                     Choose whether or not to automatically assign boundary types to zones.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
+                    Specify the maximum size of the elements for the surface mesh.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose whether or not to check for self-intersecting faces. Performance may be improved if this is disabled.
+                    Specify a limiting value for skewness to improve the quality of the surface mesh. Quality improvement is attempted on those triangles where the skewness is above this limit.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -9399,9 +9405,9 @@ class Root(PyMenu):
                     Choose whether or not to automatically remesh in order to remove excessive clustering of nodes. By default (auto), this is done if local sizing has been assigned or Share Topology is invoked, but skipped if not. Performance may be improved if this is disabled. In addition, you can choose to use the much faster refaceting technique as an alternative to automatic remeshing. When importing the mesh, remeshing is only performed if this option is set to yes and then all faces are remeshed; and the refaceting option is not available because the initial mesh cannot be refaceted.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify a limiting value for skewness to improve the quality of the surface mesh. Quality improvement is attempted on those triangles where the skewness is above this limit.
+                    Choose whether or not to check for self-intersecting faces. Performance may be improved if this is disabled.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):
@@ -9494,10 +9500,10 @@ class Root(PyMenu):
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
                     self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
-                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -9534,14 +9540,14 @@ class Root(PyMenu):
                     Argument UsePartOrBodyAsSuffix.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportNamedSelections.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument ExtractFeatures.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -9549,9 +9555,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
             class _ShareTopologyPreferences(PySingletonCommandArgumentsSubItem):
@@ -9566,14 +9572,14 @@ class Root(PyMenu):
                     self.ConnectLabelWildcard = self._ConnectLabelWildcard(self, "ConnectLabelWildcard", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
                     self.RelativeShareTopologyTolerance = self._RelativeShareTopologyTolerance(self, "RelativeShareTopologyTolerance", service, rules, path)
-                    self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
+                    self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
                     self.ExecuteJoinIntersect = self._ExecuteJoinIntersect(self, "ExecuteJoinIntersect", service, rules, path)
                     self.Operation = self._Operation(self, "Operation", service, rules, path)
-                    self.ShareTopologyAngle = self._ShareTopologyAngle(self, "ShareTopologyAngle", service, rules, path)
+                    self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                     self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
-                    self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
-                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
                     self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
+                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
+                    self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.NumberOfJoinTries = self._NumberOfJoinTries(self, "NumberOfJoinTries", service, rules, path)
 
@@ -9602,9 +9608,9 @@ class Root(PyMenu):
                     Specify the relative tolerance for joining or intersecting face pairs, or the relative tolerance for connecting edge and face pairs.
                     """
 
-                class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
+                class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument FluidLabelWildcard.
+                    Specify the threshold angle for joining face pairs.
                     """
 
                 class _ExecuteJoinIntersect(PyTextualCommandArgumentsSubItem):
@@ -9617,9 +9623,9 @@ class Root(PyMenu):
                     Choose whether to apply share topology using the Join-Intersect method where you join and/or intersect the problematic faces, or using the Interface Connect method where you connect edges of overlapping face pairs. Note that imprinting of overlapping faces in SCDM/Discovery is highly recommended for the Interface Connect method.
                     """
 
-                class _ShareTopologyAngle(PyNumericalCommandArgumentsSubItem):
+                class _FluidLabelWildcard(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the threshold angle for joining face pairs.
+                    Argument FluidLabelWildcard.
                     """
 
                 class _STToleranceIncrement(PyNumericalCommandArgumentsSubItem):
@@ -9627,9 +9633,9 @@ class Root(PyMenu):
                     Specify the increment by which the tolerance changes for each attempt to join face pairs.
                     """
 
-                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
+                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
                 class _PerLabelList(PyTextualCommandArgumentsSubItem):
@@ -9637,9 +9643,9 @@ class Root(PyMenu):
                     Argument PerLabelList.
                     """
 
-                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
+                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -10032,9 +10038,9 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.HexMinCellLength = self._HexMinCellLength(self, "HexMinCellLength", service, rules, path)
-                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
                     self.PeelLayers = self._PeelLayers(self, "PeelLayers", service, rules, path)
+                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
+                    self.HexMinCellLength = self._HexMinCellLength(self, "HexMinCellLength", service, rules, path)
                     self.Type = self._Type(self, "Type", service, rules, path)
                     self.CellSizing = self._CellSizing(self, "CellSizing", service, rules, path)
                     self.HexMaxSize = self._HexMaxSize(self, "HexMaxSize", service, rules, path)
@@ -10047,9 +10053,9 @@ class Root(PyMenu):
                     Argument MaxSize.
                     """
 
-                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
+                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
+                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
                     """
 
                 class _TetPolyMaxCellLength(PyNumericalCommandArgumentsSubItem):
@@ -10057,9 +10063,9 @@ class Root(PyMenu):
                     The maximum cell length for either the tetrahedron, polyhedron, or poly-hexcore volume fill types.
                     """
 
-                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
+                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
+                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
                     """
 
                 class _Type(PyTextualCommandArgumentsSubItem):
@@ -10114,29 +10120,30 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
                     self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
                     self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
-                    self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
                     self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
+                    self.SizeFieldPeriodicity = self._SizeFieldPeriodicity(self, "SizeFieldPeriodicity", service, rules, path)
+                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
                     self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
-                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
+                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
                     self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
                     self.AddMultipleQualityMethods = self._AddMultipleQualityMethods(self, "AddMultipleQualityMethods", service, rules, path)
                     self.MaxCellSizeChange = self._MaxCellSizeChange(self, "MaxCellSizeChange", service, rules, path)
                     self.WritePrismControlFile = self._WritePrismControlFile(self, "WritePrismControlFile", service, rules, path)
-                    self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
+                    self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
                     self.CheckSelfProximity = self._CheckSelfProximity(self, "CheckSelfProximity", service, rules, path)
                     self.Avoid1_8Transition = self._Avoid1_8Transition(self, "Avoid1_8Transition", service, rules, path)
                     self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
-                    self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
+                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
                     self.SolidGrowthRate = self._SolidGrowthRate(self, "SolidGrowthRate", service, rules, path)
-                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
+                    self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
                     self.QualityWarningLimit = self._QualityWarningLimit(self, "QualityWarningLimit", service, rules, path)
 
-                class _UseSizeField(PyTextualCommandArgumentsSubItem):
+                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
+                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
                     """
 
                 class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
@@ -10149,14 +10156,19 @@ class Root(PyMenu):
                     Argument MinPolySize.
                     """
 
-                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
+                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
+                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
                     """
 
-                class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
+                class _SizeFieldPeriodicity(PyTextualCommandArgumentsSubItem):
                     """
-                    This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
+                    Argument SizeFieldPeriodicity.
+                    """
+
+                class _UseSizeField(PyTextualCommandArgumentsSubItem):
+                    """
+                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
                     """
 
                 class _QualityMethod(PyTextualCommandArgumentsSubItem):
@@ -10164,9 +10176,9 @@ class Root(PyMenu):
                     Choose from several different types of mesh quality controls (skewness, aspect ratio, change in size, and so on). Choices include Orthogonal (the default for the workflows), Enhanced Orthogonal, and Skewness. For more information, see  More... .
                     """
 
-                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
                     """
 
                 class _TetInSolids(PyTextualCommandArgumentsSubItem):
@@ -10189,9 +10201,9 @@ class Root(PyMenu):
                     Indicate whether or not you want to save a .pzmcontrol file to your working folder that will contain the boundary (prism) layer specifications.
                     """
 
-                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
+                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
                     """
-                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
+                    Argument MinFaceArea.
                     """
 
                 class _CheckSelfProximity(PyTextualCommandArgumentsSubItem):
@@ -10209,9 +10221,9 @@ class Root(PyMenu):
                     Argument MinEdgeLength.
                     """
 
-                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
+                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument MinFaceArea.
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _SolidGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -10219,9 +10231,9 @@ class Root(PyMenu):
                     Specify the rate of growth for a tetrahedron or polyhedron mesh.
                     """
 
-                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
+                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
                     """
-                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
+                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
                     """
 
                 class _QualityWarningLimit(PyNumericalCommandArgumentsSubItem):
@@ -10243,8 +10255,8 @@ class Root(PyMenu):
                     self.PrismGapFactor = self._PrismGapFactor(self, "PrismGapFactor", service, rules, path)
                     self.IgnoreInflation = self._IgnoreInflation(self, "IgnoreInflation", service, rules, path)
                     self.MergeBoundaryLayers = self._MergeBoundaryLayers(self, "MergeBoundaryLayers", service, rules, path)
-                    self.NormalSmoothRelaxationFactor = self._NormalSmoothRelaxationFactor(self, "NormalSmoothRelaxationFactor", service, rules, path)
                     self.ShowPrismPreferences = self._ShowPrismPreferences(self, "ShowPrismPreferences", service, rules, path)
+                    self.NormalSmoothRelaxationFactor = self._NormalSmoothRelaxationFactor(self, "NormalSmoothRelaxationFactor", service, rules, path)
                     self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismMinAspectRatio = self._PrismMinAspectRatio(self, "PrismMinAspectRatio", service, rules, path)
                     self.PrismAdjacentAngle = self._PrismAdjacentAngle(self, "PrismAdjacentAngle", service, rules, path)
@@ -10284,14 +10296,14 @@ class Root(PyMenu):
                     Choose whether or not you want to have the boundary layer mesh merged into the bulk mesh.
                     """
 
-                class _NormalSmoothRelaxationFactor(PyNumericalCommandArgumentsSubItem):
+                class _ShowPrismPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify the smoothness factor for normal prism layers. Increasing this value will generate more prism layers especially near sharp corners.
+                    Display global settings for your boundary layers. Note that these settings are not applied for Multizone boundary layers
                     """
 
-                class _ShowPrismPreferences(PyParameterCommandArgumentsSubItem):
+                class _NormalSmoothRelaxationFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display global settings for your boundary layers. Note that these settings are not applied for Multizone boundary layers
+                    Specify the smoothness factor for normal prism layers. Increasing this value will generate more prism layers especially near sharp corners.
                     """
 
                 class _StairstepExposedQuads(PyTextualCommandArgumentsSubItem):
@@ -10316,19 +10328,19 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
+                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
                     self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
                     self.ShowGlobalThinVolumePreferences = self._ShowGlobalThinVolumePreferences(self, "ShowGlobalThinVolumePreferences", service, rules, path)
 
-                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
+                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
-                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
                     """
 
                 class _StairStep(PyTextualCommandArgumentsSubItem):
@@ -10488,8 +10500,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -10519,14 +10531,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -10743,10 +10755,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -10773,9 +10785,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -10788,9 +10800,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
         def create_instance(self) -> _GeometrySetupCommandArguments:
@@ -11011,8 +11023,8 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
@@ -11077,14 +11089,14 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Node2.
+                    Argument Y-Offset.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _Node2(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument Node2.
                     """
 
                 class _X2(PyNumericalCommandArgumentsSubItem):
@@ -11621,9 +11633,9 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
                     self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
 
@@ -11657,9 +11669,9 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
                 class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
@@ -11667,9 +11679,9 @@ class Root(PyMenu):
                     Argument ExtractFeatures.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -11769,7 +11781,7 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
+                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
                     self.FacetedBodies = self._FacetedBodies(self, "FacetedBodies", service, rules, path)
                     self.CISeparation = self._CISeparation(self, "CISeparation", service, rules, path)
                     self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
@@ -11779,11 +11791,11 @@ class Root(PyMenu):
                     self.MaxFacetLength = self._MaxFacetLength(self, "MaxFacetLength", service, rules, path)
                     self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
                     self.CISeparationAngle = self._CISeparationAngle(self, "CISeparationAngle", service, rules, path)
-                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
+                    self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
 
-                class _CITolerence(PyNumericalCommandArgumentsSubItem):
+                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
+                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
                     """
 
                 class _FacetedBodies(PyTextualCommandArgumentsSubItem):
@@ -11831,9 +11843,9 @@ class Root(PyMenu):
                     Specify the angle at which features will be extracted from the CAD model on import. Assigning a smaller separation angle will produce more zones.
                     """
 
-                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
+                class _CITolerence(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
+                    Specify the level of facet refinement during import. A value approximately 1/10 of the intended minimum size is recommended. Using a value of 0 results in the coarsest possible faceting.
                     """
 
             class _FileName(PyTextualCommandArgumentsSubItem):
@@ -11884,11 +11896,11 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
+                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
                     self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
-                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11920,9 +11932,9 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
                 class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
@@ -11940,9 +11952,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
         def create_instance(self) -> _ImportGeometryCommandArguments:
@@ -12007,10 +12019,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -12037,9 +12049,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Indicate if there are any small imperfections (ledge or step artifacts from the original CAD geometry) that can be removed as part of this task. If you select yes, then you must specify a Max Step Width and the Step Skewness Quality Limit.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -12052,9 +12064,9 @@ class Root(PyMenu):
                     Specify the width of the step that you wish to remove.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Indicate if there are any small imperfections (ledge or step artifacts from the original CAD geometry) that can be removed as part of this task. If you select yes, then you must specify a Max Step Width and the Step Skewness Quality Limit.
+                    Display advanced options that you may want to apply to the task.
                     """
 
         def create_instance(self) -> _ImproveSurfaceMeshCommandArguments:
@@ -12268,8 +12280,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.FirstNumber = self._FirstNumber(self, "FirstNumber", service, rules, path)
-                    self.NbCellsPerUnit = self._NbCellsPerUnit(self, "NbCellsPerUnit", service, rules, path)
                     self.CustomPatternString = self._CustomPatternString(self, "CustomPatternString", service, rules, path)
+                    self.NbCellsPerUnit = self._NbCellsPerUnit(self, "NbCellsPerUnit", service, rules, path)
                     self.InvokeBatteryModelingOptions = self._InvokeBatteryModelingOptions(self, "InvokeBatteryModelingOptions", service, rules, path)
                     self.UseCustomPattern = self._UseCustomPattern(self, "UseCustomPattern", service, rules, path)
 
@@ -12278,14 +12290,14 @@ class Root(PyMenu):
                     Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.  More...
                     """
 
-                class _NbCellsPerUnit(PyNumericalCommandArgumentsSubItem):
+                class _CustomPatternString(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.   More...
+                    Argument CustomPatternString.
                     """
 
-                class _CustomPatternString(PyTextualCommandArgumentsSubItem):
+                class _NbCellsPerUnit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CustomPatternString.
+                    Specify the numerical value that will be appended to the name of the first unit associated with the meshing pattern object. This value also dictates the labeling for mesh objects associated with this mesh pattern.   More...
                     """
 
                 class _InvokeBatteryModelingOptions(PyTextualCommandArgumentsSubItem):
@@ -12378,9 +12390,9 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.FacetResolution = self._FacetResolution(self, "FacetResolution", service, rules, path)
+                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
-                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.MaxEdgeLength = self._MaxEdgeLength(self, "MaxEdgeLength", service, rules, path)
                     self.CustomNormalAngle = self._CustomNormalAngle(self, "CustomNormalAngle", service, rules, path)
                     self.CustomDeviation = self._CustomDeviation(self, "CustomDeviation", service, rules, path)
@@ -12396,6 +12408,11 @@ class Root(PyMenu):
                     Argument FacetResolution.
                     """
 
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument NormalAngle.
+                    """
+
                 class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument Deviation.
@@ -12406,11 +12423,6 @@ class Root(PyMenu):
                     Argument MaxEdgeLengthFactor.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument NormalAngle.
-                    """
-
                 class _MaxEdgeLength(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument MaxEdgeLength.
@@ -12535,11 +12547,11 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
-                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
+                    self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
+                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
                     self.GrowthRate = self._GrowthRate(self, "GrowthRate", service, rules, path)
 
@@ -12588,11 +12600,6 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
-                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the increase in element edge length with each succeeding layer of elements.
-                    """
-
                 class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
                     Choose the type of sizing control (curvature, proximity, soft, or boi).
@@ -12603,9 +12610,9 @@ class Root(PyMenu):
                     Enable this field to display the initial size control in the graphics window.
                     """
 
-                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
+                    Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
                 class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
@@ -12613,6 +12620,11 @@ class Root(PyMenu):
                     Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
                     """
 
+                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
+                    """
+
                 class _TargetSizeControl(PyParameterCommandArgumentsSubItem):
                     """
                     Enable this field to display the target size control in the graphics window.
@@ -12994,8 +13006,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -13025,14 +13037,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -13314,10 +13326,10 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
-                    self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
                     self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
+                    self.Refacet = self._Refacet(self, "Refacet", service, rules, path)
+                    self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
 
                 class _FacetMaxEdgeLength(PyTextualCommandArgumentsSubItem):
                     """
@@ -13329,14 +13341,14 @@ class Root(PyMenu):
                     Specify a maximum element size for the imported model to avoid very large facets during the file import.
                     """
 
-                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify a rotational angle (in degrees) of transformation.
+                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
                     """
 
-                class _Deviation(PyNumericalCommandArgumentsSubItem):
+                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the distance between facet edges and the geometry edges. Decreasing this value will result in more facets along curved edges.
+                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
                     """
 
                 class _Refacet(PyParameterCommandArgumentsSubItem):
@@ -13344,9 +13356,9 @@ class Root(PyMenu):
                     Select this option when you want to change faceting of the selected object. Refaceting will refacet the original CAD geometry. Only the faceted CAD geometry is used during the meshing process. The refaceting settings control how far the facet edges are from the model and the size of the facets.  More...
                     """
 
-                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
+                class _NormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specifies the maximum size of the facets relative to the bounding box of the geometry.
+                    Specify a rotational angle (in degrees) of transformation.
                     """
 
             class _IgnoreSolidNames(PyParameterCommandArgumentsSubItem):
@@ -14118,10 +14130,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -14148,9 +14160,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14163,9 +14175,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
             class _SurfaceMeshPreferences(PySingletonCommandArgumentsSubItem):
@@ -14176,21 +14188,22 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
-                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
-                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
-                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
-                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
+                    self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
+                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
+                    self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
+                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
+                    self.ParallelRegionCompute = self._ParallelRegionCompute(self, "ParallelRegionCompute", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
-                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
                     self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -14198,14 +14211,14 @@ class Root(PyMenu):
                     Argument SMQualityCollapseLimit.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Argument FoldFaceLimit.
                     """
 
-                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImprove.
+                    Argument SMSeparation.
                     """
 
                 class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
@@ -14213,14 +14226,14 @@ class Root(PyMenu):
                     Argument ShowSurfaceMeshPreferences.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SMSeparation.
+                    Argument SMSeparationAngle.
                     """
 
-                class _FoldFaceLimit(PyNumericalCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument FoldFaceLimit.
+                    Argument AutoMerge.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -14228,9 +14241,9 @@ class Root(PyMenu):
                     Argument TVMAutoControlCreation.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMSeparationAngle.
+                    Argument SMQualityImprove.
                     """
 
                 class _SMRemoveStep(PyTextualCommandArgumentsSubItem):
@@ -14238,14 +14251,19 @@ class Root(PyMenu):
                     Argument SMRemoveStep.
                     """
 
+                class _ParallelRegionCompute(PyTextualCommandArgumentsSubItem):
+                    """
+                    Argument ParallelRegionCompute.
+                    """
+
                 class _SMStepWidth(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument SMStepWidth.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SMQualityMaxAngle.
+                    Argument VolumeMeshMaxSize.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -14253,14 +14271,14 @@ class Root(PyMenu):
                     Argument AutoAssignZoneTypes.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument VolumeMeshMaxSize.
+                    Argument SMQualityMaxAngle.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImproveLimit.
+                    Argument SelfIntersectCheck.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -14268,9 +14286,9 @@ class Root(PyMenu):
                     Argument AutoSurfaceRemesh.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SelfIntersectCheck.
+                    Argument SMQualityImproveLimit.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):
@@ -14360,9 +14378,9 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.NewLabelObjects = self._NewLabelObjects(self, "NewLabelObjects", service, rules, path)
-                    self.NewLabelResolution = self._NewLabelResolution(self, "NewLabelResolution", service, rules, path)
-                    self.NewLabelType = self._NewLabelType(self, "NewLabelType", service, rules, path)
                     self.NewLabels = self._NewLabels(self, "NewLabels", service, rules, path)
+                    self.NewLabelType = self._NewLabelType(self, "NewLabelType", service, rules, path)
+                    self.NewLabelResolution = self._NewLabelResolution(self, "NewLabelResolution", service, rules, path)
                     self.NewLabelCells = self._NewLabelCells(self, "NewLabelCells", service, rules, path)
                     self.NewLabelMax = self._NewLabelMax(self, "NewLabelMax", service, rules, path)
                     self.NewZoneType = self._NewZoneType(self, "NewZoneType", service, rules, path)
@@ -14374,9 +14392,9 @@ class Root(PyMenu):
                     Argument NewLabelObjects.
                     """
 
-                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
+                class _NewLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabelResolution.
+                    Argument NewLabels.
                     """
 
                 class _NewLabelType(PyTextualCommandArgumentsSubItem):
@@ -14384,9 +14402,9 @@ class Root(PyMenu):
                     Argument NewLabelType.
                     """
 
-                class _NewLabels(PyTextualCommandArgumentsSubItem):
+                class _NewLabelResolution(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument NewLabels.
+                    Argument NewLabelResolution.
                     """
 
                 class _NewLabelCells(PyTextualCommandArgumentsSubItem):