ansys-fluent-core 0.33.dev0__py3-none-any.whl → 0.33.1__py3-none-any.whl

ansys/fluent/core/generated/datamodel_252/meshing.py

@@ -1526,8 +1526,8 @@ class Root(PyMenu):
                     self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
@@ -1551,14 +1551,14 @@ class Root(PyMenu):
                     Argument MinAspectRatio.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument LastRatioNumLayers.
                     """
 
-                class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioNumLayers.
+                    Argument LastRatioPercentage.
                     """
 
                 class _GapFactor(PyNumericalCommandArgumentsSubItem):
@@ -1772,9 +1772,9 @@ class Root(PyMenu):
                     self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
+                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.ShowLocalPrismPreferences = self._ShowLocalPrismPreferences(self, "ShowLocalPrismPreferences", service, rules, path)
-                    self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
                     self.AllowedTangencyAtInvalidNormals = self._AllowedTangencyAtInvalidNormals(self, "AllowedTangencyAtInvalidNormals", service, rules, path)
                     self.RemeshAtInvalidNormals = self._RemeshAtInvalidNormals(self, "RemeshAtInvalidNormals", service, rules, path)
                     self.IgnoreBoundaryLayers = self._IgnoreBoundaryLayers(self, "IgnoreBoundaryLayers", service, rules, path)
@@ -1819,6 +1819,11 @@ class Root(PyMenu):
                     Argument InvalidNormalMethod.
                     """
 
+                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
+                    """
+
                 class _LastRatioNumLayers(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument LastRatioNumLayers.
@@ -1829,11 +1834,6 @@ class Root(PyMenu):
                     Display advanced options that you may want to apply to this task.
                     """
 
-                class _NumberOfSplitLayers(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Indicate the number of split prism layers you wish to apply to each layer that you specified for the boundary layer definition.
-                    """
-
                 class _AllowedTangencyAtInvalidNormals(PyNumericalCommandArgumentsSubItem):
                     """
                     Controls the tangency of the invalid normal faces. An invalid normal location with all 90 degree angles has a tangency of 1. So, faces are still treated as an invalid normal even if the angle deviates slightly from 90 degrees (resulting in a tangency of 0.98).
@@ -2090,8 +2090,8 @@ class Root(PyMenu):
                     self.SphereRadiusFactorAtInvalidNormals = self._SphereRadiusFactorAtInvalidNormals(self, "SphereRadiusFactorAtInvalidNormals", service, rules, path)
                     self.SmoothRingsAtInvalidNormals = self._SmoothRingsAtInvalidNormals(self, "SmoothRingsAtInvalidNormals", service, rules, path)
                     self.Continuous = self._Continuous(self, "Continuous", service, rules, path)
-                    self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.SplitPrism = self._SplitPrism(self, "SplitPrism", service, rules, path)
+                    self.ModifyAtInvalidNormals = self._ModifyAtInvalidNormals(self, "ModifyAtInvalidNormals", service, rules, path)
                     self.InvalidNormalMethod = self._InvalidNormalMethod(self, "InvalidNormalMethod", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
                     self.NumberOfSplitLayers = self._NumberOfSplitLayers(self, "NumberOfSplitLayers", service, rules, path)
@@ -2125,14 +2125,14 @@ class Root(PyMenu):
                     Specify how you would like to improve the generated boundary layer: as a continuous or stair-stepped boundary layer in the specified area(s).
                     """
 
-                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
+                class _SplitPrism(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
+                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
                     """
 
-                class _SplitPrism(PyTextualCommandArgumentsSubItem):
+                class _ModifyAtInvalidNormals(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose whether or not to add split prisms to each layer along the boundary. Not available when the Offset Method Type is set to last-ratio.
+                    Specify whether to automatically change the surface mesh where invalid normal faces are detected. To grow the boundary layer mesh in the proper direction (away from the boundary), normal vectors (valid) are required at the boundary face nodes of the surface mesh. More...
                     """
 
                 class _InvalidNormalMethod(PyTextualCommandArgumentsSubItem):
@@ -2395,11 +2395,11 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
-                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
-                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
+                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
+                    self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
+                    self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.TargetSizeControl = self._TargetSizeControl(self, "TargetSizeControl", service, rules, path)
                     self.GrowthRate = self._GrowthRate(self, "GrowthRate", service, rules, path)
 
@@ -2448,9 +2448,9 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
+                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    Specify the increase in element edge length with each succeeding layer of elements.
                     """
 
                 class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
@@ -2458,19 +2458,19 @@ class Root(PyMenu):
                     Enable this field to display the initial size control in the graphics window.
                     """
 
-                class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
+                class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the increase in element edge length with each succeeding layer of elements.
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
                     """
 
-                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
+                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
                     """
 
-                class _CellsPerGap(PyNumericalCommandArgumentsSubItem):
+                class _WrapCurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the minimum number of layers of elements to be generated in the gaps. The number of cells per gap can be a real value, with a minimum value of 0.01.
+                    Specify the maximum allowable angle (from 0 to 180 degrees) that one element edge is allowed to span given a particular geometry curvature. You can use this field to limit the number of elements that are generated along a curve or surface if the minimum size is too small for that particular curve.
                     """
 
                 class _TargetSizeControl(PyParameterCommandArgumentsSubItem):
@@ -2999,8 +2999,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -3030,14 +3030,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -3249,8 +3249,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
                     self.ExposeSide = self._ExposeSide(self, "ExposeSide", service, rules, path)
+                    self.ShowShellBLAdvancedOptions = self._ShowShellBLAdvancedOptions(self, "ShowShellBLAdvancedOptions", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
                     self.LastRatioNumLayers = self._LastRatioNumLayers(self, "LastRatioNumLayers", service, rules, path)
@@ -3258,14 +3258,14 @@ class Root(PyMenu):
                     self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.AdjacentAttachAngle = self._AdjacentAttachAngle(self, "AdjacentAttachAngle", service, rules, path)
 
-                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _ExposeSide(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowShellBLAdvancedOptions.
+                    Argument ExposeSide.
                     """
 
-                class _ExposeSide(PyTextualCommandArgumentsSubItem):
+                class _ShowShellBLAdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExposeSide.
+                    Argument ShowShellBLAdvancedOptions.
                     """
 
                 class _MaxAspectRatio(PyNumericalCommandArgumentsSubItem):
@@ -4164,14 +4164,14 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.WrapTargetRatio = self._WrapTargetRatio(self, "WrapTargetRatio", service, rules, path)
                     self.WrapTargetSizeFieldRatio = self._WrapTargetSizeFieldRatio(self, "WrapTargetSizeFieldRatio", service, rules, path)
-                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.WrapTargetBothOptions = self._WrapTargetBothOptions(self, "WrapTargetBothOptions", service, rules, path)
                     self.SolidFluidRaio = self._SolidFluidRaio(self, "SolidFluidRaio", service, rules, path)
                     self.BoundaryLayers = self._BoundaryLayers(self, "BoundaryLayers", service, rules, path)
                     self.EdgeProximityComputation = self._EdgeProximityComputation(self, "EdgeProximityComputation", service, rules, path)
-                    self.WrapTargetBothOptions = self._WrapTargetBothOptions(self, "WrapTargetBothOptions", service, rules, path)
-                    self.SolidFluidRatio = self._SolidFluidRatio(self, "SolidFluidRatio", service, rules, path)
-                    self.TargetSizeFieldFileName = self._TargetSizeFieldFileName(self, "TargetSizeFieldFileName", service, rules, path)
+                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
                     self.ExistingSizeField = self._ExistingSizeField(self, "ExistingSizeField", service, rules, path)
+                    self.TargetSizeFieldFileName = self._TargetSizeFieldFileName(self, "TargetSizeFieldFileName", service, rules, path)
+                    self.SolidFluidRatio = self._SolidFluidRatio(self, "SolidFluidRatio", service, rules, path)
                     self.WrapSizeFieldFileName = self._WrapSizeFieldFileName(self, "WrapSizeFieldFileName", service, rules, path)
                     self.TargeSizeFieldFileName = self._TargeSizeFieldFileName(self, "TargeSizeFieldFileName", service, rules, path)
                     self.WrapTargetRaio = self._WrapTargetRaio(self, "WrapTargetRaio", service, rules, path)
@@ -4186,9 +4186,9 @@ class Root(PyMenu):
                     The ratio of the initial wrap size field and the local target size field.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _WrapTargetBothOptions(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Determine how the size controls are calculated in the Add Local Sizing task: using Both Wrap and Target values, by Target Only (the default), or by Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
                     """
 
                 class _SolidFluidRaio(PyNumericalCommandArgumentsSubItem):
@@ -4206,14 +4206,14 @@ class Root(PyMenu):
                     For geometries having a very large number of small feature edges, select Yes to speed up the calculation and reduce memory requirements when using a proximity size function.
                     """
 
-                class _WrapTargetBothOptions(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Determine how the size controls are calculated in the Add Local Sizing task: using Both Wrap and Target values, by Target Only (the default), or by Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
+                    Display advanced options that you may want to apply to the task.
                     """
 
-                class _SolidFluidRatio(PyNumericalCommandArgumentsSubItem):
+                class _ExistingSizeField(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SolidFluidRatio.
+                    Determine which existing size field files will be used: Both Wrap and Target (the default), Target Only, or Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
                     """
 
                 class _TargetSizeFieldFileName(PyTextualCommandArgumentsSubItem):
@@ -4221,9 +4221,9 @@ class Root(PyMenu):
                     Argument TargetSizeFieldFileName.
                     """
 
-                class _ExistingSizeField(PyTextualCommandArgumentsSubItem):
+                class _SolidFluidRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Determine which existing size field files will be used: Both Wrap and Target (the default), Target Only, or Wrap Only. For complex models, computational expense can be lowered by choosing one of the other options. If either Wrap Only or Target Only is selected, then the other values are determined using the Wrap/Target Size Ratio value.
+                    Argument SolidFluidRatio.
                     """
 
                 class _WrapSizeFieldFileName(PyTextualCommandArgumentsSubItem):
@@ -4508,7 +4508,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -4519,16 +4519,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Argument SizeRelativeLength.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Xmax.
+                    Argument XmaxRatio.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -4581,9 +4581,9 @@ class Root(PyMenu):
                     Argument ZmaxRatio.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument XmaxRatio.
+                    Argument Xmax.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -4598,16 +4598,16 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
-                    self.X = self._X(self, "X", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.X = self._X(self, "X", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
@@ -4639,14 +4639,14 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument BoundaryLayerLevels.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Argument WakeGrowthFactor.
                     """
 
                 class _Rate(PyNumericalCommandArgumentsSubItem):
@@ -4654,9 +4654,9 @@ class Root(PyMenu):
                     Argument Rate.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument AspectRatio.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -4674,19 +4674,19 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Argument NumberOfLayers.
                     """
 
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X.
+                    Argument LastRatioPercentage.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LastRatioPercentage.
+                    Argument X.
                     """
 
                 class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
@@ -4732,9 +4732,9 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
@@ -4774,9 +4774,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -4784,9 +4784,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -4873,12 +4873,12 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
+                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
-                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
-                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
+                    self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
+                    self.BoxZLength = self._BoxZLength(self, "BoxZLength", service, rules, path)
                     self.BoxCenterY = self._BoxCenterY(self, "BoxCenterY", service, rules, path)
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
@@ -4892,14 +4892,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -4907,9 +4907,9 @@ class Root(PyMenu):
                     Argument CylinderX1.
                     """
 
-                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxZLength.
+                    Argument BoxXLength.
                     """
 
                 class _CylinderY1(PyNumericalCommandArgumentsSubItem):
@@ -4917,9 +4917,9 @@ class Root(PyMenu):
                     Argument CylinderY1.
                     """
 
-                class _BoxXLength(PyNumericalCommandArgumentsSubItem):
+                class _BoxZLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxXLength.
+                    Argument BoxZLength.
                     """
 
                 class _BoxCenterY(PyNumericalCommandArgumentsSubItem):
@@ -5186,17 +5186,17 @@ class Root(PyMenu):
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
                     self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
-                    self.X = self._X(self, "X", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
-                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
+                    self.X = self._X(self, "X", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
+                    self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
                     self.BoundaryLayerHeight = self._BoundaryLayerHeight(self, "BoundaryLayerHeight", service, rules, path)
                     self.CrossWakeGrowthFactor = self._CrossWakeGrowthFactor(self, "CrossWakeGrowthFactor", service, rules, path)
@@ -5231,19 +5231,19 @@ class Root(PyMenu):
                     Argument BoundaryLayerLevels.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument WakeGrowthFactor.
+                    Argument Rate.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Argument WakeGrowthFactor.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument NumberOfLayers.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -5261,14 +5261,9 @@ class Root(PyMenu):
                     Choose a single edge zone from the list below for your edge-based collar mesh. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument NumberOfLayers.
-                    """
-
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the x-coordinate of the offset collar mesh.
+                    Argument AspectRatio.
                     """
 
                 class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
@@ -5276,9 +5271,9 @@ class Root(PyMenu):
                     Argument LastRatioPercentage.
                     """
 
-                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument FlipDirection.
+                    Specify the x-coordinate of the offset collar mesh.
                     """
 
                 class _OffsetMethodType(PyTextualCommandArgumentsSubItem):
@@ -5286,6 +5281,11 @@ class Root(PyMenu):
                     Argument OffsetMethodType.
                     """
 
+                class _FlipDirection(PyParameterCommandArgumentsSubItem):
+                    """
+                    Argument FlipDirection.
+                    """
+
                 class _FirstHeight(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument FirstHeight.
@@ -5313,32 +5313,32 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z1 = self._Z1(self, "Z1", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Argument X-Offset.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X-Offset.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -5361,9 +5361,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -5371,9 +5371,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -5396,14 +5396,14 @@ class Root(PyMenu):
                     Argument Y-Offset.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Node2.
+                    Argument X2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Node2(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument X2.
+                    Argument Node2.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -5470,8 +5470,8 @@ class Root(PyMenu):
                     self.CylinderZ1 = self._CylinderZ1(self, "CylinderZ1", service, rules, path)
                     self.CylinderRadius1 = self._CylinderRadius1(self, "CylinderRadius1", service, rules, path)
                     self.BoxCenterX = self._BoxCenterX(self, "BoxCenterX", service, rules, path)
-                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderRadius2 = self._CylinderRadius2(self, "CylinderRadius2", service, rules, path)
+                    self.BoxCenterZ = self._BoxCenterZ(self, "BoxCenterZ", service, rules, path)
                     self.CylinderY2 = self._CylinderY2(self, "CylinderY2", service, rules, path)
 
                 class _CylinderZ2(PyNumericalCommandArgumentsSubItem):
@@ -5529,14 +5529,14 @@ class Root(PyMenu):
                     Specify the x-coordinate of the offset collar mesh.
                     """
 
-                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
+                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the z-coordinate of the offset collar mesh.
+                    Argument CylinderRadius2.
                     """
 
-                class _CylinderRadius2(PyNumericalCommandArgumentsSubItem):
+                class _BoxCenterZ(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderRadius2.
+                    Specify the z-coordinate of the offset collar mesh.
                     """
 
                 class _CylinderY2(PyNumericalCommandArgumentsSubItem):
@@ -5683,7 +5683,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -5694,16 +5694,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the component mesh as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -5756,9 +5756,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -5773,16 +5773,16 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
+                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
-                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
+                    self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.OffsetMethodType = self._OffsetMethodType(self, "OffsetMethodType", service, rules, path)
                     self.FirstHeight = self._FirstHeight(self, "FirstHeight", service, rules, path)
@@ -5814,9 +5814,9 @@ class Root(PyMenu):
                     Argument DefeaturingSize.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoundaryLayerLevels.
+                    Specify the ratio of the prism base length to the prism layer height.
                     """
 
                 class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
@@ -5824,14 +5824,14 @@ class Root(PyMenu):
                     Argument WakeGrowthFactor.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select the number of boundary layers to be generated.
+                    Specify the rate of growth of the boundary layer.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the rate of growth of the boundary layer.
+                    Argument BoundaryLayerLevels.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -5849,19 +5849,19 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the ratio of the prism base length to the prism layer height.
+                    Select the number of boundary layers to be generated.
                     """
 
-                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
+                class _X(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the offset height of the last layer as a percentage of the local base mesh size.
+                    Argument X.
                     """
 
-                class _X(PyNumericalCommandArgumentsSubItem):
+                class _LastRatioPercentage(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument X.
+                    Specify the offset height of the last layer as a percentage of the local base mesh size.
                     """
 
                 class _FlipDirection(PyParameterCommandArgumentsSubItem):
@@ -5907,15 +5907,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z2 = self._Z2(self, "Z2", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z1 = self._Z1(self, "Z1", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
-                    self.X2 = self._X2(self, "X2", service, rules, path)
                     self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
+                    self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -5949,9 +5949,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -5959,9 +5959,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -5979,9 +5979,9 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Node2(PyTextualCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Node2.
+                    Argument Y-Offset.
                     """
 
                 class _X2(PyNumericalCommandArgumentsSubItem):
@@ -5989,9 +5989,9 @@ class Root(PyMenu):
                     Argument X2.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _Node2(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument Y-Offset.
+                    Argument Node2.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -6048,8 +6048,8 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.CylinderZ2 = self._CylinderZ2(self, "CylinderZ2", service, rules, path)
-                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.BoxYLength = self._BoxYLength(self, "BoxYLength", service, rules, path)
+                    self.CylinderX2 = self._CylinderX2(self, "CylinderX2", service, rules, path)
                     self.CylinderX1 = self._CylinderX1(self, "CylinderX1", service, rules, path)
                     self.BoxXLength = self._BoxXLength(self, "BoxXLength", service, rules, path)
                     self.CylinderY1 = self._CylinderY1(self, "CylinderY1", service, rules, path)
@@ -6067,14 +6067,14 @@ class Root(PyMenu):
                     Argument CylinderZ2.
                     """
 
-                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
+                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument CylinderX2.
+                    Argument BoxYLength.
                     """
 
-                class _BoxYLength(PyNumericalCommandArgumentsSubItem):
+                class _CylinderX2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument BoxYLength.
+                    Argument CylinderX2.
                     """
 
                 class _CylinderX1(PyNumericalCommandArgumentsSubItem):
@@ -6370,7 +6370,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6381,16 +6381,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6443,9 +6443,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
         def create_instance(self) -> _CreateExternalFlowBoundariesCommandArguments:
@@ -6891,7 +6891,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -6902,16 +6902,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the refinement region as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -6964,9 +6964,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the initial position of the cylindrical refinement region.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
             class _OffsetObject(PySingletonCommandArgumentsSubItem):
@@ -6981,14 +6981,14 @@ class Root(PyMenu):
                     self.ShowCoordinates = self._ShowCoordinates(self, "ShowCoordinates", service, rules, path)
                     self.Y = self._Y(self, "Y", service, rules, path)
                     self.DefeaturingSize = self._DefeaturingSize(self, "DefeaturingSize", service, rules, path)
-                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
-                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.AspectRatio = self._AspectRatio(self, "AspectRatio", service, rules, path)
                     self.Rate = self._Rate(self, "Rate", service, rules, path)
+                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.WakeGrowthFactor = self._WakeGrowthFactor(self, "WakeGrowthFactor", service, rules, path)
                     self.FlowDirection = self._FlowDirection(self, "FlowDirection", service, rules, path)
                     self.MptMethodType = self._MptMethodType(self, "MptMethodType", service, rules, path)
                     self.EdgeSelectionList = self._EdgeSelectionList(self, "EdgeSelectionList", service, rules, path)
-                    self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
+                    self.BoundaryLayerLevels = self._BoundaryLayerLevels(self, "BoundaryLayerLevels", service, rules, path)
                     self.X = self._X(self, "X", service, rules, path)
                     self.LastRatioPercentage = self._LastRatioPercentage(self, "LastRatioPercentage", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
@@ -7022,24 +7022,24 @@ class Root(PyMenu):
                     Specify a value that is used to obtain a rough shape of the selected object(s). The larger the value, the more approximate the shape.
                     """
 
-                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
+                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of boundary layers that are to be captured in the refinement region.
+                    Argument AspectRatio.
                     """
 
-                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
+                class _Rate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the factor by which the refinement region expands in the wake of the flow direction.
+                    Argument Rate.
                     """
 
-                class _AspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AspectRatio.
+                    Argument NumberOfLayers.
                     """
 
-                class _Rate(PyNumericalCommandArgumentsSubItem):
+                class _WakeGrowthFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Rate.
+                    Specify the factor by which the refinement region expands in the wake of the flow direction.
                     """
 
                 class _FlowDirection(PyTextualCommandArgumentsSubItem):
@@ -7057,9 +7057,9 @@ class Root(PyMenu):
                     Argument EdgeSelectionList.
                     """
 
-                class _NumberOfLayers(PyNumericalCommandArgumentsSubItem):
+                class _BoundaryLayerLevels(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument NumberOfLayers.
+                    Specify the number of boundary layers that are to be captured in the refinement region.
                     """
 
                 class _X(PyNumericalCommandArgumentsSubItem):
@@ -7109,8 +7109,8 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.X_Offset = self._X_Offset(self, "X-Offset", service, rules, path)
+                    self.HeightNode = self._HeightNode(self, "HeightNode", service, rules, path)
                     self.HeightBackInc = self._HeightBackInc(self, "HeightBackInc", service, rules, path)
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
@@ -7121,20 +7121,20 @@ class Root(PyMenu):
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
-                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Node2 = self._Node2(self, "Node2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
-                class _HeightNode(PyTextualCommandArgumentsSubItem):
+                class _X_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument HeightNode.
+                    Specify the X-coordinate for the offset of the initial position of the cylinder.
                     """
 
-                class _X_Offset(PyNumericalCommandArgumentsSubItem):
+                class _HeightNode(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate for the offset of the initial position of the cylinder.
+                    Argument HeightNode.
                     """
 
                 class _HeightBackInc(PyNumericalCommandArgumentsSubItem):
@@ -7187,9 +7187,9 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                class _X2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
+                    Specify the X-coordinate of the second position of the cylinder.
                     """
 
                 class _Node2(PyTextualCommandArgumentsSubItem):
@@ -7197,9 +7197,9 @@ class Root(PyMenu):
                     Argument Node2.
                     """
 
-                class _X2(PyNumericalCommandArgumentsSubItem):
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the X-coordinate of the second position of the cylinder.
+                    Specify the Y-coordinate for the offset of the initial position of the cylinder.
                     """
 
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
@@ -7538,11 +7538,11 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.NumberOfLayers = self._NumberOfLayers(self, "NumberOfLayers", service, rules, path)
                     self.LabelSelectionList = self._LabelSelectionList(self, "LabelSelectionList", service, rules, path)
-                    self.ZoneSelectionList = self._ZoneSelectionList(self, "ZoneSelectionList", service, rules, path)
-                    self.Thickness = self._Thickness(self, "Thickness", service, rules, path)
                     self.SelectionType = self._SelectionType(self, "SelectionType", service, rules, path)
-                    self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
+                    self.Thickness = self._Thickness(self, "Thickness", service, rules, path)
+                    self.ZoneSelectionList = self._ZoneSelectionList(self, "ZoneSelectionList", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
+                    self.MeshSize = self._MeshSize(self, "MeshSize", service, rules, path)
                     self.BufferSize = self._BufferSize(self, "BufferSize", service, rules, path)
                     self.FlipDirection = self._FlipDirection(self, "FlipDirection", service, rules, path)
                     self.NonRectangularBufferSize = self._NonRectangularBufferSize(self, "NonRectangularBufferSize", service, rules, path)
@@ -7558,9 +7558,9 @@ class Root(PyMenu):
                     Select a single label that will correspond to the porous region. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _ZoneSelectionList(PyTextualCommandArgumentsSubItem):
+                class _SelectionType(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose a single face zone from the list below. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Choose how you want to make your selection (by object, zone, or label).
                     """
 
                 class _Thickness(PyNumericalCommandArgumentsSubItem):
@@ -7568,19 +7568,19 @@ class Root(PyMenu):
                     Specify the thickness (or the total height) of the porous region.
                     """
 
-                class _SelectionType(PyTextualCommandArgumentsSubItem):
+                class _ZoneSelectionList(PyTextualCommandArgumentsSubItem):
                     """
-                    Choose how you want to make your selection (by object, zone, or label).
+                    Choose a single face zone from the list below. Use the Filter Text field to provide text and/or regular expressions in filtering the list. The matching list item(s) are automatically displayed in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
-                class _MeshSize(PyNumericalCommandArgumentsSubItem):
+                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the cell size for the porous region mesh.
+                    Specify the angle at which features will be extracted for the porous region.
                     """
 
-                class _FeatureAngle(PyNumericalCommandArgumentsSubItem):
+                class _MeshSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the angle at which features will be extracted for the porous region.
+                    Specify the cell size for the porous region mesh.
                     """
 
                 class _BufferSize(PyNumericalCommandArgumentsSubItem):
@@ -7911,10 +7911,10 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.PorousRegions = self._PorousRegions(self, "PorousRegions", service, rules, path)
-                    self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
-                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
                     self.ZeroThickness = self._ZeroThickness(self, "ZeroThickness", service, rules, path)
+                    self.CloseLeakges = self._CloseLeakges(self, "CloseLeakges", service, rules, path)
+                    self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
+                    self.CloseLeakages = self._CloseLeakages(self, "CloseLeakages", service, rules, path)
                     self.ExtractEdgeFeatures = self._ExtractEdgeFeatures(self, "ExtractEdgeFeatures", service, rules, path)
                     self.MovingObjects = self._MovingObjects(self, "MovingObjects", service, rules, path)
                     self.EnablePrimeWrapper = self._EnablePrimeWrapper(self, "EnablePrimeWrapper", service, rules, path)
@@ -7926,24 +7926,24 @@ class Root(PyMenu):
                     Specify whether or not you will have any porous regions in your geometry. If so, then a Create Porous Regions task will be added to the workflow. A simple primitive rectangle will be placed over complex and detailed geometry of a porous region (for example, fins and tubes of a heat exchanger).  With buffer layer:
                     """
 
-                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
+                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument CloseLeakages.
+                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
                     """
 
-                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
+                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the workflow.
+                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
                     """
 
-                class _CloseLeakges(PyTextualCommandArgumentsSubItem):
+                class _AdvancedOptions(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify whether or not your geometry contains any problems (such as gaps or overlapping/intersecting surfaces) that may create leakages that need to be closed. If so, then a Define Leakage Threshold task is added to the workflow.
+                    Display advanced options that you may want to apply to the workflow.
                     """
 
-                class _ZeroThickness(PyTextualCommandArgumentsSubItem):
+                class _CloseLeakages(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not you will need to account for any portions of your geometry with zero-thickness, and apply thickness to them for a more refined surface mesh. If so, then an Add Thickness task will be added to the workflow.
+                    Argument CloseLeakages.
                     """
 
                 class _ExtractEdgeFeatures(PyTextualCommandArgumentsSubItem):
@@ -8287,16 +8287,16 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MaxLayerHeight = self._MaxLayerHeight(self, "MaxLayerHeight", service, rules, path)
-                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
                     self.BiasMethod = self._BiasMethod(self, "BiasMethod", service, rules, path)
+                    self.MidSpanLength = self._MidSpanLength(self, "MidSpanLength", service, rules, path)
+                    self.MaxLayerHeight = self._MaxLayerHeight(self, "MaxLayerHeight", service, rules, path)
                     self.BiasMethodControl = self._BiasMethodControl(self, "BiasMethodControl", service, rules, path)
                     self.MergeCellZones = self._MergeCellZones(self, "MergeCellZones", service, rules, path)
                     self.ShowVMExtrudePreferences = self._ShowVMExtrudePreferences(self, "ShowVMExtrudePreferences", service, rules, path)
 
-                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
+                class _BiasMethod(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MaxLayerHeight.
+                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
                     """
 
                 class _MidSpanLength(PyNumericalCommandArgumentsSubItem):
@@ -8304,9 +8304,9 @@ class Root(PyMenu):
                     Argument MidSpanLength.
                     """
 
-                class _BiasMethod(PyTextualCommandArgumentsSubItem):
+                class _MaxLayerHeight(PyNumericalCommandArgumentsSubItem):
                     """
-                    Select from a choice of patterns that you want to apply to your volume mesh extrusion.
+                    Argument MaxLayerHeight.
                     """
 
                 class _BiasMethodControl(PyTextualCommandArgumentsSubItem):
@@ -8391,12 +8391,12 @@ class Root(PyMenu):
                     self.SplitQuads = self._SplitQuads(self, "SplitQuads", service, rules, path)
                     self.MaxAspectRatio = self._MaxAspectRatio(self, "MaxAspectRatio", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.RemeshGrowthRate = self._RemeshGrowthRate(self, "RemeshGrowthRate", service, rules, path)
                     self.LocalRemesh = self._LocalRemesh(self, "LocalRemesh", service, rules, path)
-                    self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
+                    self.RemeshGrowthRate = self._RemeshGrowthRate(self, "RemeshGrowthRate", service, rules, path)
+                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
                     self.ShowPrism2DPreferences = self._ShowPrism2DPreferences(self, "ShowPrism2DPreferences", service, rules, path)
                     self.RefineStretchedQuads = self._RefineStretchedQuads(self, "RefineStretchedQuads", service, rules, path)
-                    self.MaxFaceSkew = self._MaxFaceSkew(self, "MaxFaceSkew", service, rules, path)
+                    self.GapFactor = self._GapFactor(self, "GapFactor", service, rules, path)
                     self.nOrthogonalLayers = self._nOrthogonalLayers(self, "nOrthogonalLayers", service, rules, path)
 
                 class _SplitQuads(PyTextualCommandArgumentsSubItem):
@@ -8414,19 +8414,19 @@ class Root(PyMenu):
                     Argument MinAspectRatio.
                     """
 
-                class _RemeshGrowthRate(PyNumericalCommandArgumentsSubItem):
+                class _LocalRemesh(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument RemeshGrowthRate.
+                    Argument LocalRemesh.
                     """
 
-                class _LocalRemesh(PyTextualCommandArgumentsSubItem):
+                class _RemeshGrowthRate(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument LocalRemesh.
+                    Argument RemeshGrowthRate.
                     """
 
-                class _GapFactor(PyNumericalCommandArgumentsSubItem):
+                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument GapFactor.
+                    Argument MaxFaceSkew.
                     """
 
                 class _ShowPrism2DPreferences(PyParameterCommandArgumentsSubItem):
@@ -8439,9 +8439,9 @@ class Root(PyMenu):
                     Argument RefineStretchedQuads.
                     """
 
-                class _MaxFaceSkew(PyNumericalCommandArgumentsSubItem):
+                class _GapFactor(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MaxFaceSkew.
+                    Argument GapFactor.
                     """
 
                 class _nOrthogonalLayers(PyNumericalCommandArgumentsSubItem):
@@ -8456,18 +8456,18 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.MergeEdgeZonesBasedOnLabels = self._MergeEdgeZonesBasedOnLabels(self, "MergeEdgeZonesBasedOnLabels", service, rules, path)
+                    self.MergeFaceZonesBasedOnLabels = self._MergeFaceZonesBasedOnLabels(self, "MergeFaceZonesBasedOnLabels", service, rules, path)
                     self.ShowAdvancedOptions = self._ShowAdvancedOptions(self, "ShowAdvancedOptions", service, rules, path)
 
-                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeFaceZonesBasedOnLabels.
+                    Argument MergeEdgeZonesBasedOnLabels.
                     """
 
-                class _MergeEdgeZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
+                class _MergeFaceZonesBasedOnLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MergeEdgeZonesBasedOnLabels.
+                    Argument MergeFaceZonesBasedOnLabels.
                     """
 
                 class _ShowAdvancedOptions(PyParameterCommandArgumentsSubItem):
@@ -9310,15 +9310,15 @@ class Root(PyMenu):
                     self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
                     self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
-                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
                     self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
                     self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
                     self.SMStepWidth = self._SMStepWidth(self, "SMStepWidth", service, rules, path)
-                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
+                    self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
+                    self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
                     self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
                     self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
                     self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
@@ -9344,14 +9344,14 @@ class Root(PyMenu):
                     Display advanced options that you may want to apply to the task.
                     """
 
-                class _AutoMerge(PyParameterCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument AutoMerge.
+                    Specify a desired angle for determining separation. Assigning a smaller separation angle will produce more zones.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _AutoMerge(PyParameterCommandArgumentsSubItem):
                     """
-                    Specify a desired angle for determining separation. Assigning a smaller separation angle will produce more zones.
+                    Argument AutoMerge.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -9374,9 +9374,9 @@ class Root(PyMenu):
                     Specify the width of the step that you wish to remove.
                     """
 
-                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
+                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
+                    Specify the maximum size of the elements for the surface mesh.
                     """
 
                 class _AutoAssignZoneTypes(PyTextualCommandArgumentsSubItem):
@@ -9384,9 +9384,9 @@ class Root(PyMenu):
                     Choose whether or not to automatically assign boundary types to zones.
                     """
 
-                class _VolumeMeshMaxSize(PyNumericalCommandArgumentsSubItem):
+                class _SMQualityMaxAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the maximum size of the elements for the surface mesh.
+                    Specify the maximum angle between the normals of adjacent faces. This quality measure is useful in locating sharp corners in complicated geometries. The angle value ranges from 0 to 180 degrees. Four consecutive attempts are made to improve the quality, each using a larger adjacent angle, until this maximum value.
                     """
 
                 class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
@@ -9493,11 +9493,11 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
-                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -9529,19 +9529,19 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument ImportNamedSelections.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -9549,9 +9549,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
             class _ShareTopologyPreferences(PySingletonCommandArgumentsSubItem):
@@ -9571,9 +9571,9 @@ class Root(PyMenu):
                     self.Operation = self._Operation(self, "Operation", service, rules, path)
                     self.FluidLabelWildcard = self._FluidLabelWildcard(self, "FluidLabelWildcard", service, rules, path)
                     self.STToleranceIncrement = self._STToleranceIncrement(self, "STToleranceIncrement", service, rules, path)
-                    self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
-                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
                     self.ShowShareTopologyPreferences = self._ShowShareTopologyPreferences(self, "ShowShareTopologyPreferences", service, rules, path)
+                    self.PerLabelList = self._PerLabelList(self, "PerLabelList", service, rules, path)
+                    self.IntfLabelList = self._IntfLabelList(self, "IntfLabelList", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.NumberOfJoinTries = self._NumberOfJoinTries(self, "NumberOfJoinTries", service, rules, path)
 
@@ -9627,9 +9627,9 @@ class Root(PyMenu):
                     Specify the increment by which the tolerance changes for each attempt to join face pairs.
                     """
 
-                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
+                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
+                    Display advanced options that you may want to apply to the task.
                     """
 
                 class _PerLabelList(PyTextualCommandArgumentsSubItem):
@@ -9637,9 +9637,9 @@ class Root(PyMenu):
                     Argument PerLabelList.
                     """
 
-                class _ShowShareTopologyPreferences(PyParameterCommandArgumentsSubItem):
+                class _IntfLabelList(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Enter a text string to filter out the list of labels. Use the Filter Text drop-down to provide text and/or regular expressions in filtering the list (for example, using \\*, ?, and []). Choose Use Wildcard to provide wildcard expressions in filtering the list. When you use either ? or \\* in your expression, the matching list item(s) are automatically selected in the list. Use ^, |, and & in your expression to indicate boolean operations for NOT, OR, and AND, respectively.  More...
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -10032,9 +10032,9 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
-                    self.PeelLayers = self._PeelLayers(self, "PeelLayers", service, rules, path)
-                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
                     self.HexMinCellLength = self._HexMinCellLength(self, "HexMinCellLength", service, rules, path)
+                    self.TetPolyMaxCellLength = self._TetPolyMaxCellLength(self, "TetPolyMaxCellLength", service, rules, path)
+                    self.PeelLayers = self._PeelLayers(self, "PeelLayers", service, rules, path)
                     self.Type = self._Type(self, "Type", service, rules, path)
                     self.CellSizing = self._CellSizing(self, "CellSizing", service, rules, path)
                     self.HexMaxSize = self._HexMaxSize(self, "HexMaxSize", service, rules, path)
@@ -10047,9 +10047,9 @@ class Root(PyMenu):
                     Argument MaxSize.
                     """
 
-                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
+                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
+                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
                     """
 
                 class _TetPolyMaxCellLength(PyNumericalCommandArgumentsSubItem):
@@ -10057,9 +10057,9 @@ class Root(PyMenu):
                     The maximum cell length for either the tetrahedron, polyhedron, or poly-hexcore volume fill types.
                     """
 
-                class _HexMinCellLength(PyNumericalCommandArgumentsSubItem):
+                class _PeelLayers(PyNumericalCommandArgumentsSubItem):
                     """
-                    The minimum cell length for the hexcore or  poly-hexcore volume fill types.
+                    Specify the number of layers that control the gap between the hexahedra core and the geometry.  This distance is assumed to be the height of an ideal tetrahedral cell on the boundary face.
                     """
 
                 class _Type(PyTextualCommandArgumentsSubItem):
@@ -10114,29 +10114,29 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
                     self.QualityMethod = self._QualityMethod(self, "QualityMethod", service, rules, path)
                     self.MinPolySize = self._MinPolySize(self, "MinPolySize", service, rules, path)
-                    self.MergeBodyLabels = self._MergeBodyLabels(self, "MergeBodyLabels", service, rules, path)
-                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
                     self.PolyFeatureAngle = self._PolyFeatureAngle(self, "PolyFeatureAngle", service, rules, path)
-                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
-                    self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
+                    self.UseSizeField = self._UseSizeField(self, "UseSizeField", service, rules, path)
+                    self.UseSizeFieldInSolids = self._UseSizeFieldInSolids(self, "UseSizeFieldInSolids", service, rules, path)
+                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
+                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
                     self.AddMultipleQualityMethods = self._AddMultipleQualityMethods(self, "AddMultipleQualityMethods", service, rules, path)
                     self.MaxCellSizeChange = self._MaxCellSizeChange(self, "MaxCellSizeChange", service, rules, path)
                     self.WritePrismControlFile = self._WritePrismControlFile(self, "WritePrismControlFile", service, rules, path)
-                    self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
+                    self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
                     self.CheckSelfProximity = self._CheckSelfProximity(self, "CheckSelfProximity", service, rules, path)
                     self.Avoid1_8Transition = self._Avoid1_8Transition(self, "Avoid1_8Transition", service, rules, path)
-                    self.ShowVolumeMeshPreferences = self._ShowVolumeMeshPreferences(self, "ShowVolumeMeshPreferences", service, rules, path)
-                    self.MinFaceArea = self._MinFaceArea(self, "MinFaceArea", service, rules, path)
+                    self.PrepareZoneNames = self._PrepareZoneNames(self, "PrepareZoneNames", service, rules, path)
+                    self.MinEdgeLength = self._MinEdgeLength(self, "MinEdgeLength", service, rules, path)
                     self.SolidGrowthRate = self._SolidGrowthRate(self, "SolidGrowthRate", service, rules, path)
-                    self.TetInSolids = self._TetInSolids(self, "TetInSolids", service, rules, path)
+                    self.PolyInSolids = self._PolyInSolids(self, "PolyInSolids", service, rules, path)
                     self.QualityWarningLimit = self._QualityWarningLimit(self, "QualityWarningLimit", service, rules, path)
 
-                class _UseSizeField(PyTextualCommandArgumentsSubItem):
+                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
+                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
                     """
 
                 class _QualityMethod(PyTextualCommandArgumentsSubItem):
@@ -10149,9 +10149,14 @@ class Root(PyMenu):
                     Argument MinPolySize.
                     """
 
-                class _MergeBodyLabels(PyTextualCommandArgumentsSubItem):
+                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Specify the angle to preserve features when using a polyhedral-based mesh.
+                    """
+
+                class _UseSizeField(PyTextualCommandArgumentsSubItem):
                     """
-                    Determine whether or not you would like to merge bodies that contain multiple body labels when generating the volume mesh (the default is yes)
+                    Specify whether or not to use size fields as part of generating the volume mesh. By default, this is set to yes when a BOI or body sizing has been defined in the Add Local Sizing task, however, for large cases, it can be turned off for the hexcore and poly-hexcore volume fill methods.
                     """
 
                 class _UseSizeFieldInSolids(PyTextualCommandArgumentsSubItem):
@@ -10159,19 +10164,14 @@ class Root(PyMenu):
                     This option is available when both the Use Size Field? and Fill Polyhedra in Solids? options are enabled for the poly-hexcore fill method. By default this option is set to no, which specifies growth-rate-based sizing for polyhedra regions during poly-hexcore generation. Selecting yes for this option specifies the sizing for polyhedra regions to be size-field based and is recommended when BOI(s) or body sizing have been defined that include the polyhedra region.
                     """
 
-                class _PolyFeatureAngle(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Specify the angle to preserve features when using a polyhedral-based mesh.
-                    """
-
-                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
+                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
+                    Display advanced options that you may want to apply to the task.
                     """
 
-                class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
+                class _TetInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument MinEdgeLength.
+                    Argument TetInSolids.
                     """
 
                 class _AddMultipleQualityMethods(PyTextualCommandArgumentsSubItem):
@@ -10189,9 +10189,9 @@ class Root(PyMenu):
                     Indicate whether or not you want to save a .pzmcontrol file to your working folder that will contain the boundary (prism) layer specifications.
                     """
 
-                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
+                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
                     """
-                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
+                    Argument MinFaceArea.
                     """
 
                 class _CheckSelfProximity(PyTextualCommandArgumentsSubItem):
@@ -10204,14 +10204,14 @@ class Root(PyMenu):
                     Indicate whether or not you want to avoid any potential 1:8 cell transition in the hexcore region of the volume mesh, replacing any abrupt change in the cell size with polyhedral cells to improve solver performance in such transitional areas.
                     """
 
-                class _ShowVolumeMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _PrepareZoneNames(PyTextualCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Indicate whether or not you want to persistently rename volume mesh components. This will make zone names equivalent to region names, and will make cell and face zone names unique.  Using this field is highly recommended for any parametric study. Persistent renaming only works if all body names are unique.
                     """
 
-                class _MinFaceArea(PyNumericalCommandArgumentsSubItem):
+                class _MinEdgeLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MinFaceArea.
+                    Argument MinEdgeLength.
                     """
 
                 class _SolidGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -10219,9 +10219,9 @@ class Root(PyMenu):
                     Specify the rate of growth for a tetrahedron or polyhedron mesh.
                     """
 
-                class _TetInSolids(PyTextualCommandArgumentsSubItem):
+                class _PolyInSolids(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument TetInSolids.
+                    Indicate whether or not to fill only polyhedra cells in all solid regions during volume meshing using the poly-hexcore volume fill method.  The default value is no. Setting this to yes may improve meshing efficiency.
                     """
 
                 class _QualityWarningLimit(PyNumericalCommandArgumentsSubItem):
@@ -10245,8 +10245,8 @@ class Root(PyMenu):
                     self.MergeBoundaryLayers = self._MergeBoundaryLayers(self, "MergeBoundaryLayers", service, rules, path)
                     self.ShowPrismPreferences = self._ShowPrismPreferences(self, "ShowPrismPreferences", service, rules, path)
                     self.NormalSmoothRelaxationFactor = self._NormalSmoothRelaxationFactor(self, "NormalSmoothRelaxationFactor", service, rules, path)
-                    self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismMinAspectRatio = self._PrismMinAspectRatio(self, "PrismMinAspectRatio", service, rules, path)
+                    self.StairstepExposedQuads = self._StairstepExposedQuads(self, "StairstepExposedQuads", service, rules, path)
                     self.PrismAdjacentAngle = self._PrismAdjacentAngle(self, "PrismAdjacentAngle", service, rules, path)
 
                 class _PrismKeepFirstLayer(PyTextualCommandArgumentsSubItem):
@@ -10294,14 +10294,14 @@ class Root(PyMenu):
                     Specify the smoothness factor for normal prism layers. Increasing this value will generate more prism layers especially near sharp corners.
                     """
 
-                class _StairstepExposedQuads(PyTextualCommandArgumentsSubItem):
+                class _PrismMinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    This option can be used when generating a tetrahedral mesh with prism cells and is set to No by default. Selecting Yes for this option will enable stair-stepping for exposed quadrilateral faces (exposed quads) on prism cells. Stair-stepping will prevent pyramids from being created on these exposed quads, which generally would lead to poor quality in the exposed quad location.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
-                class _PrismMinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _StairstepExposedQuads(PyTextualCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    This option can be used when generating a tetrahedral mesh with prism cells and is set to No by default. Selecting Yes for this option will enable stair-stepping for exposed quadrilateral faces (exposed quads) on prism cells. Stair-stepping will prevent pyramids from being created on these exposed quads, which generally would lead to poor quality in the exposed quad location.
                     """
 
                 class _PrismAdjacentAngle(PyNumericalCommandArgumentsSubItem):
@@ -10316,19 +10316,19 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
                     self.MinAspectRatio = self._MinAspectRatio(self, "MinAspectRatio", service, rules, path)
-                    self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
                     self.ShowGlobalThinVolumePreferences = self._ShowGlobalThinVolumePreferences(self, "ShowGlobalThinVolumePreferences", service, rules, path)
+                    self.StairStep = self._StairStep(self, "StairStep", service, rules, path)
+                    self.AutoOrderControls = self._AutoOrderControls(self, "AutoOrderControls", service, rules, path)
 
-                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
+                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
+                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
                     """
 
-                class _MinAspectRatio(PyNumericalCommandArgumentsSubItem):
+                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Controls the minimum aspect ratio for cells at the boundary of the thin volume mesh regions. By default, this option is set to 0.3, other than for Stacked Plates, where it is set to 0.1. For flat parallel plates (not including stacked plates), it is recommended to use a value of 0.1 to produce a high quality thin volume mesh.
+                    Display global settings for thin volume meshing.
                     """
 
                 class _StairStep(PyTextualCommandArgumentsSubItem):
@@ -10336,9 +10336,9 @@ class Root(PyMenu):
                     Use this option to invoke stair-stepping at thin volume mesh regions.
                     """
 
-                class _ShowGlobalThinVolumePreferences(PyParameterCommandArgumentsSubItem):
+                class _AutoOrderControls(PyTextualCommandArgumentsSubItem):
                     """
-                    Display global settings for thin volume meshing.
+                    When set to yes, will automatically swap source and target faces in order to increase the success rate of the thin volume mesh generation. This option is set to yes by default for conventional thin volume meshing and is set to no when Stacked Plates is enabled.
                     """
 
             class _InvokePrimsControl(PyTextualCommandArgumentsSubItem):
@@ -10488,8 +10488,8 @@ class Root(PyMenu):
                     self.SaveSizeFieldFile = self._SaveSizeFieldFile(self, "SaveSizeFieldFile", service, rules, path)
                     self.MaxSize = self._MaxSize(self, "MaxSize", service, rules, path)
                     self.ScopeProximityTo = self._ScopeProximityTo(self, "ScopeProximityTo", service, rules, path)
-                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.CurvatureNormalAngle = self._CurvatureNormalAngle(self, "CurvatureNormalAngle", service, rules, path)
+                    self.PreviewSizefield = self._PreviewSizefield(self, "PreviewSizefield", service, rules, path)
                     self.SaveSizeField = self._SaveSizeField(self, "SaveSizeField", service, rules, path)
                     self.UseSizeFiles = self._UseSizeFiles(self, "UseSizeFiles", service, rules, path)
                     self.AutoCreateScopedSizing = self._AutoCreateScopedSizing(self, "AutoCreateScopedSizing", service, rules, path)
@@ -10519,14 +10519,14 @@ class Root(PyMenu):
                     Argument ScopeProximityTo.
                     """
 
-                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
+                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument PreviewSizefield.
+                    Argument CurvatureNormalAngle.
                     """
 
-                class _CurvatureNormalAngle(PyNumericalCommandArgumentsSubItem):
+                class _PreviewSizefield(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument CurvatureNormalAngle.
+                    Argument PreviewSizefield.
                     """
 
                 class _SaveSizeField(PyParameterCommandArgumentsSubItem):
@@ -10743,10 +10743,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -10773,9 +10773,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -10788,9 +10788,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
         def create_instance(self) -> _GeometrySetupCommandArguments:
@@ -11005,15 +11005,15 @@ class Root(PyMenu):
                     self.X1 = self._X1(self, "X1", service, rules, path)
                     self.Y1 = self._Y1(self, "Y1", service, rules, path)
                     self.Z_Offset = self._Z_Offset(self, "Z-Offset", service, rules, path)
-                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
-                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
                     self.Z1 = self._Z1(self, "Z1", service, rules, path)
+                    self.Node1 = self._Node1(self, "Node1", service, rules, path)
+                    self.Z2 = self._Z2(self, "Z2", service, rules, path)
                     self.Radius2 = self._Radius2(self, "Radius2", service, rules, path)
                     self.Y2 = self._Y2(self, "Y2", service, rules, path)
                     self.Node3 = self._Node3(self, "Node3", service, rules, path)
-                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.Node2 = self._Node2(self, "Node2", service, rules, path)
                     self.X2 = self._X2(self, "X2", service, rules, path)
+                    self.Y_Offset = self._Y_Offset(self, "Y-Offset", service, rules, path)
                     self.HeightFrontInc = self._HeightFrontInc(self, "HeightFrontInc", service, rules, path)
                     self.Radius1 = self._Radius1(self, "Radius1", service, rules, path)
 
@@ -11047,9 +11047,9 @@ class Root(PyMenu):
                     Argument Z-Offset.
                     """
 
-                class _Z2(PyNumericalCommandArgumentsSubItem):
+                class _Z1(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z2.
+                    Argument Z1.
                     """
 
                 class _Node1(PyTextualCommandArgumentsSubItem):
@@ -11057,9 +11057,9 @@ class Root(PyMenu):
                     Argument Node1.
                     """
 
-                class _Z1(PyNumericalCommandArgumentsSubItem):
+                class _Z2(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument Z1.
+                    Argument Z2.
                     """
 
                 class _Radius2(PyNumericalCommandArgumentsSubItem):
@@ -11077,11 +11077,6 @@ class Root(PyMenu):
                     Argument Node3.
                     """
 
-                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument Y-Offset.
-                    """
-
                 class _Node2(PyTextualCommandArgumentsSubItem):
                     """
                     Argument Node2.
@@ -11092,6 +11087,11 @@ class Root(PyMenu):
                     Argument X2.
                     """
 
+                class _Y_Offset(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument Y-Offset.
+                    """
+
                 class _HeightFrontInc(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument HeightFrontInc.
@@ -11115,7 +11115,7 @@ class Root(PyMenu):
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
                     self.SizeRelativeLength = self._SizeRelativeLength(self, "SizeRelativeLength", service, rules, path)
-                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
+                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
                     self.XminRatio = self._XminRatio(self, "XminRatio", service, rules, path)
                     self.YminRatio = self._YminRatio(self, "YminRatio", service, rules, path)
                     self.Zmin = self._Zmin(self, "Zmin", service, rules, path)
@@ -11126,16 +11126,16 @@ class Root(PyMenu):
                     self.Xmin = self._Xmin(self, "Xmin", service, rules, path)
                     self.YmaxRatio = self._YmaxRatio(self, "YmaxRatio", service, rules, path)
                     self.ZmaxRatio = self._ZmaxRatio(self, "ZmaxRatio", service, rules, path)
-                    self.Xmax = self._Xmax(self, "Xmax", service, rules, path)
+                    self.XmaxRatio = self._XmaxRatio(self, "XmaxRatio", service, rules, path)
 
                 class _SizeRelativeLength(PyTextualCommandArgumentsSubItem):
                     """
                     Determine if you would like to specify the bounding box for the construction surface as a ratio of the geometry length, or by specifying a specific location for the minimum and maximum coordinates.
                     """
 
-                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
+                class _Xmax(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
+                    Extends the maximum size of the bounding box in the X direction by the specified value.
                     """
 
                 class _XminRatio(PyNumericalCommandArgumentsSubItem):
@@ -11188,9 +11188,9 @@ class Root(PyMenu):
                     Extends the maximum size of the bounding box in the Z direction by the specified value. The value is the ratio relative to the geometry size in the Z direction.
                     """
 
-                class _Xmax(PyNumericalCommandArgumentsSubItem):
+                class _XmaxRatio(PyNumericalCommandArgumentsSubItem):
                     """
-                    Extends the maximum size of the bounding box in the X direction by the specified value.
+                    Extends the maximum size of the bounding box in the X direction by the specified value. The value is the ratio relative to the geometry size in the X direction.
                     """
 
         def create_instance(self) -> _IdentifyConstructionSurfacesCommandArguments:
@@ -11621,11 +11621,11 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
                     self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
-                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
+                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11657,19 +11657,19 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument ImportNamedSelections.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -11677,9 +11677,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
         def create_instance(self) -> _ImportBodyOfInfluenceGeometryCommandArguments:
@@ -11769,21 +11769,21 @@ class Root(PyMenu):
 
                 def __init__(self, parent, attr, service, rules, path):
                     super().__init__(parent, attr, service, rules, path)
-                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
+                    self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
                     self.FacetedBodies = self._FacetedBodies(self, "FacetedBodies", service, rules, path)
                     self.CISeparation = self._CISeparation(self, "CISeparation", service, rules, path)
-                    self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
+                    self.EdgeLabel = self._EdgeLabel(self, "EdgeLabel", service, rules, path)
                     self.CIRefaceting = self._CIRefaceting(self, "CIRefaceting", service, rules, path)
                     self.AutomaticObjectCreation = self._AutomaticObjectCreation(self, "AutomaticObjectCreation", service, rules, path)
-                    self.ShowImportCadPreferences = self._ShowImportCadPreferences(self, "ShowImportCadPreferences", service, rules, path)
                     self.MaxFacetLength = self._MaxFacetLength(self, "MaxFacetLength", service, rules, path)
-                    self.MergeNodes = self._MergeNodes(self, "MergeNodes", service, rules, path)
+                    self.ShowImportCadPreferences = self._ShowImportCadPreferences(self, "ShowImportCadPreferences", service, rules, path)
+                    self.ExtractAngle = self._ExtractAngle(self, "ExtractAngle", service, rules, path)
                     self.CISeparationAngle = self._CISeparationAngle(self, "CISeparationAngle", service, rules, path)
                     self.CITolerence = self._CITolerence(self, "CITolerence", service, rules, path)
 
-                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
+                class _MergeNodes(PyTextualCommandArgumentsSubItem):
                     """
-                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
+                    Argument MergeNodes.
                     """
 
                 class _FacetedBodies(PyTextualCommandArgumentsSubItem):
@@ -11796,9 +11796,9 @@ class Root(PyMenu):
                     Choose whether or not you are going to separate zones upon import based on a region, a region and a specified separation angle, a face, or neither. This is required to select faces for local sizing. If Named Selections have already been defined at these locations, then separation is not needed.
                     """
 
-                class _ExtractAngle(PyNumericalCommandArgumentsSubItem):
+                class _EdgeLabel(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ExtractAngle.
+                    Specify whether or not the imported CAD geometry already includes specific edges with assigned names (named selections). These named edges can be available later in the workflow when you are adding local size controls.
                     """
 
                 class _CIRefaceting(PyParameterCommandArgumentsSubItem):
@@ -11811,19 +11811,19 @@ class Root(PyMenu):
                     Determine whether or not mesh objects and labels are automatically created upon import, potentially and dramatically increasing the mesh import speed for very large cases. By default, this is set to yes however, if it is set to no, then no labels are created and a single mesh object is created employing all zones.
                     """
 
-                class _ShowImportCadPreferences(PyParameterCommandArgumentsSubItem):
+                class _MaxFacetLength(PyNumericalCommandArgumentsSubItem):
                     """
-                    Display advanced options that you may want to apply to the task.
+                    Enables you to specify a maximum facet size for the imported model to avoid very large facets during the file import. Depending on the CAD geometry, this may yield more accuracy.
                     """
 
-                class _MaxFacetLength(PyNumericalCommandArgumentsSubItem):
+                class _ShowImportCadPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Enables you to specify a maximum facet size for the imported model to avoid very large facets during the file import. Depending on the CAD geometry, this may yield more accuracy.
+                    Display advanced options that you may want to apply to the task.
                     """
 
-                class _MergeNodes(PyTextualCommandArgumentsSubItem):
+                class _ExtractAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument MergeNodes.
+                    Argument ExtractAngle.
                     """
 
                 class _CISeparationAngle(PyNumericalCommandArgumentsSubItem):
@@ -11884,11 +11884,11 @@ class Root(PyMenu):
                     self.CreateCADAssemblies = self._CreateCADAssemblies(self, "CreateCADAssemblies", service, rules, path)
                     self.FeatureAngle = self._FeatureAngle(self, "FeatureAngle", service, rules, path)
                     self.OneZonePer = self._OneZonePer(self, "OneZonePer", service, rules, path)
-                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
-                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
+                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
                     self.ExtractFeatures = self._ExtractFeatures(self, "ExtractFeatures", service, rules, path)
+                    self.UsePartOrBodyAsSuffix = self._UsePartOrBodyAsSuffix(self, "UsePartOrBodyAsSuffix", service, rules, path)
                     self.ImportPartNames = self._ImportPartNames(self, "ImportPartNames", service, rules, path)
-                    self.ImportCurvatureDataFromCAD = self._ImportCurvatureDataFromCAD(self, "ImportCurvatureDataFromCAD", service, rules, path)
+                    self.ImportNamedSelections = self._ImportNamedSelections(self, "ImportNamedSelections", service, rules, path)
 
                 class _SavePMDBIntermediateFile(PyParameterCommandArgumentsSubItem):
                     """
@@ -11920,19 +11920,19 @@ class Root(PyMenu):
                     Argument OneZonePer.
                     """
 
-                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
+                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument UsePartOrBodyAsSuffix.
+                    Argument ImportCurvatureDataFromCAD.
                     """
 
-                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
+                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportNamedSelections.
+                    Argument ExtractFeatures.
                     """
 
-                class _ExtractFeatures(PyParameterCommandArgumentsSubItem):
+                class _UsePartOrBodyAsSuffix(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ExtractFeatures.
+                    Argument UsePartOrBodyAsSuffix.
                     """
 
                 class _ImportPartNames(PyParameterCommandArgumentsSubItem):
@@ -11940,9 +11940,9 @@ class Root(PyMenu):
                     Argument ImportPartNames.
                     """
 
-                class _ImportCurvatureDataFromCAD(PyParameterCommandArgumentsSubItem):
+                class _ImportNamedSelections(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument ImportCurvatureDataFromCAD.
+                    Argument ImportNamedSelections.
                     """
 
         def create_instance(self) -> _ImportGeometryCommandArguments:
@@ -12378,9 +12378,9 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.FacetMaxEdgeLength = self._FacetMaxEdgeLength(self, "FacetMaxEdgeLength", service, rules, path)
                     self.FacetResolution = self._FacetResolution(self, "FacetResolution", service, rules, path)
+                    self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
                     self.Deviation = self._Deviation(self, "Deviation", service, rules, path)
                     self.NormalAngle = self._NormalAngle(self, "NormalAngle", service, rules, path)
-                    self.MaxEdgeLengthFactor = self._MaxEdgeLengthFactor(self, "MaxEdgeLengthFactor", service, rules, path)
                     self.MaxEdgeLength = self._MaxEdgeLength(self, "MaxEdgeLength", service, rules, path)
                     self.CustomNormalAngle = self._CustomNormalAngle(self, "CustomNormalAngle", service, rules, path)
                     self.CustomDeviation = self._CustomDeviation(self, "CustomDeviation", service, rules, path)
@@ -12396,6 +12396,11 @@ class Root(PyMenu):
                     Argument FacetResolution.
                     """
 
+                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
+                    """
+                    Argument MaxEdgeLengthFactor.
+                    """
+
                 class _Deviation(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument Deviation.
@@ -12406,11 +12411,6 @@ class Root(PyMenu):
                     Argument NormalAngle.
                     """
 
-                class _MaxEdgeLengthFactor(PyNumericalCommandArgumentsSubItem):
-                    """
-                    Argument MaxEdgeLengthFactor.
-                    """
-
                 class _MaxEdgeLength(PyNumericalCommandArgumentsSubItem):
                     """
                     Argument MaxEdgeLength.
@@ -12535,8 +12535,8 @@ class Root(PyMenu):
                     self.MinSize = self._MinSize(self, "MinSize", service, rules, path)
                     self.WrapMax = self._WrapMax(self, "WrapMax", service, rules, path)
                     self.AdvancedOptions = self._AdvancedOptions(self, "AdvancedOptions", service, rules, path)
-                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.SizingType = self._SizingType(self, "SizingType", service, rules, path)
+                    self.InitialSizeControl = self._InitialSizeControl(self, "InitialSizeControl", service, rules, path)
                     self.WrapGrowthRate = self._WrapGrowthRate(self, "WrapGrowthRate", service, rules, path)
                     self.WrapCurvatureNormalAngle = self._WrapCurvatureNormalAngle(self, "WrapCurvatureNormalAngle", service, rules, path)
                     self.CellsPerGap = self._CellsPerGap(self, "CellsPerGap", service, rules, path)
@@ -12588,14 +12588,14 @@ class Root(PyMenu):
                     Display advanced wrap-specific options that are also applied to the task. See this description  for more information about wrap (and target) mesh size controls.
                     """
 
-                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
+                class _SizingType(PyTextualCommandArgumentsSubItem):
                     """
-                    Enable this field to display the initial size control in the graphics window.
+                    Choose the type of sizing control (curvature, proximity, soft, or boi).
                     """
 
-                class _SizingType(PyTextualCommandArgumentsSubItem):
+                class _InitialSizeControl(PyParameterCommandArgumentsSubItem):
                     """
-                    Choose the type of sizing control (curvature, proximity, soft, or boi).
+                    Enable this field to display the initial size control in the graphics window.
                     """
 
                 class _WrapGrowthRate(PyNumericalCommandArgumentsSubItem):
@@ -14118,10 +14118,10 @@ class Root(PyMenu):
                     self.SIQualityIterations = self._SIQualityIterations(self, "SIQualityIterations", service, rules, path)
                     self.SIQualityMaxAngle = self._SIQualityMaxAngle(self, "SIQualityMaxAngle", service, rules, path)
                     self.AllowDefeaturing = self._AllowDefeaturing(self, "AllowDefeaturing", service, rules, path)
-                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
+                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
                     self.AdvancedImprove = self._AdvancedImprove(self, "AdvancedImprove", service, rules, path)
                     self.SIStepWidth = self._SIStepWidth(self, "SIStepWidth", service, rules, path)
-                    self.SIRemoveStep = self._SIRemoveStep(self, "SIRemoveStep", service, rules, path)
+                    self.ShowSMImprovePreferences = self._ShowSMImprovePreferences(self, "ShowSMImprovePreferences", service, rules, path)
 
                 class _SIStepQualityLimit(PyNumericalCommandArgumentsSubItem):
                     """
@@ -14148,9 +14148,9 @@ class Root(PyMenu):
                     Argument AllowDefeaturing.
                     """
 
-                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
+                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument ShowSMImprovePreferences.
+                    Argument SIRemoveStep.
                     """
 
                 class _AdvancedImprove(PyTextualCommandArgumentsSubItem):
@@ -14163,9 +14163,9 @@ class Root(PyMenu):
                     Argument SIStepWidth.
                     """
 
-                class _SIRemoveStep(PyTextualCommandArgumentsSubItem):
+                class _ShowSMImprovePreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SIRemoveStep.
+                    Argument ShowSMImprovePreferences.
                     """
 
             class _SurfaceMeshPreferences(PySingletonCommandArgumentsSubItem):
@@ -14177,10 +14177,10 @@ class Root(PyMenu):
                     super().__init__(parent, attr, service, rules, path)
                     self.SMQualityCollapseLimit = self._SMQualityCollapseLimit(self, "SMQualityCollapseLimit", service, rules, path)
                     self.AutoMerge = self._AutoMerge(self, "AutoMerge", service, rules, path)
-                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
-                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.SMSeparation = self._SMSeparation(self, "SMSeparation", service, rules, path)
                     self.SMSeparationAngle = self._SMSeparationAngle(self, "SMSeparationAngle", service, rules, path)
+                    self.SMQualityImprove = self._SMQualityImprove(self, "SMQualityImprove", service, rules, path)
+                    self.ShowSurfaceMeshPreferences = self._ShowSurfaceMeshPreferences(self, "ShowSurfaceMeshPreferences", service, rules, path)
                     self.TVMAutoControlCreation = self._TVMAutoControlCreation(self, "TVMAutoControlCreation", service, rules, path)
                     self.FoldFaceLimit = self._FoldFaceLimit(self, "FoldFaceLimit", service, rules, path)
                     self.SMRemoveStep = self._SMRemoveStep(self, "SMRemoveStep", service, rules, path)
@@ -14188,9 +14188,9 @@ class Root(PyMenu):
                     self.VolumeMeshMaxSize = self._VolumeMeshMaxSize(self, "VolumeMeshMaxSize", service, rules, path)
                     self.AutoAssignZoneTypes = self._AutoAssignZoneTypes(self, "AutoAssignZoneTypes", service, rules, path)
                     self.SMQualityMaxAngle = self._SMQualityMaxAngle(self, "SMQualityMaxAngle", service, rules, path)
-                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
-                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
                     self.SMQualityImproveLimit = self._SMQualityImproveLimit(self, "SMQualityImproveLimit", service, rules, path)
+                    self.AutoSurfaceRemesh = self._AutoSurfaceRemesh(self, "AutoSurfaceRemesh", service, rules, path)
+                    self.SelfIntersectCheck = self._SelfIntersectCheck(self, "SelfIntersectCheck", service, rules, path)
                     self.SetVolumeMeshMaxSize = self._SetVolumeMeshMaxSize(self, "SetVolumeMeshMaxSize", service, rules, path)
 
                 class _SMQualityCollapseLimit(PyNumericalCommandArgumentsSubItem):
@@ -14203,24 +14203,24 @@ class Root(PyMenu):
                     Argument AutoMerge.
                     """
 
-                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
+                class _SMSeparation(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImprove.
+                    Argument SMSeparation.
                     """
 
-                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
+                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument ShowSurfaceMeshPreferences.
+                    Argument SMSeparationAngle.
                     """
 
-                class _SMSeparation(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImprove(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMSeparation.
+                    Argument SMQualityImprove.
                     """
 
-                class _SMSeparationAngle(PyNumericalCommandArgumentsSubItem):
+                class _ShowSurfaceMeshPreferences(PyParameterCommandArgumentsSubItem):
                     """
-                    Argument SMSeparationAngle.
+                    Argument ShowSurfaceMeshPreferences.
                     """
 
                 class _TVMAutoControlCreation(PyTextualCommandArgumentsSubItem):
@@ -14258,9 +14258,9 @@ class Root(PyMenu):
                     Argument SMQualityMaxAngle.
                     """
 
-                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
+                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
                     """
-                    Argument SelfIntersectCheck.
+                    Argument SMQualityImproveLimit.
                     """
 
                 class _AutoSurfaceRemesh(PyTextualCommandArgumentsSubItem):
@@ -14268,9 +14268,9 @@ class Root(PyMenu):
                     Argument AutoSurfaceRemesh.
                     """
 
-                class _SMQualityImproveLimit(PyNumericalCommandArgumentsSubItem):
+                class _SelfIntersectCheck(PyTextualCommandArgumentsSubItem):
                     """
-                    Argument SMQualityImproveLimit.
+                    Argument SelfIntersectCheck.
                     """
 
                 class _SetVolumeMeshMaxSize(PyTextualCommandArgumentsSubItem):