amps-python-client 5.3.4.1__zip → 5.3.4.2__zip

amps-python-client-5.3.4.1/src/message_docs.h

@@ -1,306 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-// Copyright (c) 2010-2023 60East Technologies Inc., All Rights Reserved.
-//
-// This computer software is owned by 60East Technologies Inc. and is
-// protected by U.S. copyright laws and other laws and by international
-// treaties.  This computer software is furnished by 60East Technologies
-// Inc. pursuant to a written license agreement and may be used, copied,
-// transmitted, and stored only in accordance with the terms of such
-// license agreement and with the inclusion of the above copyright notice.
-// This computer software or any other copies thereof may not be provided
-// or otherwise made available to any other person.
-//
-// U.S. Government Restricted Rights.  This computer software: (a) was
-// developed at private expense and is in all respects the proprietary
-// information of 60East Technologies Inc.; (b) was not developed with
-// government funds; (c) is a trade secret of 60East Technologies Inc.
-// for all purposes of the Freedom of Information Act; and (d) is a
-// commercial item and thus, pursuant to Section 12.212 of the Federal
-// Acquisition Regulations (FAR) and DFAR Supplement Section 227.7202,
-// Government's use, duplication or disclosure of the computer software
-// is subject to the restrictions set forth by 60East Technologies Inc..
-//
-////////////////////////////////////////////////////////////////////////////
-
-
-// Boilerplate is used in both generic documentation (for seldom used /
-// specialized fields) and in expanded documentation (for frequently used
-// or potentially confusing fields).
-
-#define SETTER_BOILERPLATE(x) "\n\nNot all headers are processed by AMPS for all commands. See the AMPS Command Reference for which headers are used by AMPS for a specific command.\n\n:param value: The new value for " #x ".\n\n:returns: this message"
-
-#define GETTER_BOILERPLATE(x) "\n\nNot all headers are populated by AMPS for all commands. See the AMPS Command Reference for which headers are returned by AMPS in response to a specific command\n\n:returns: The value of " #x " on this message."
-
-// Standard documentation simply sets up the generic documentation
-
-#define STANDARD_GETTER_DOC(x) "Gets the value of " #x " for this message." GETTER_BOILERPLATE(x)
-
-#define STANDARD_SETTER_DOC(x) "Sets the value of " #x " for this message." SETTER_BOILERPLATE(x)
-
-
-#define STANDARD_DOC(x,y) static const char* set_##x ##_docs = STANDARD_SETTER_DOC(x); \
-  static const char* get_##x ##_docs = STANDARD_GETTER_DOC(x);
-
-
-/////////////////////////////////////////////////
-// Documentation strings follow
-//
-// For fields that have not seemed to be confusing,
-// we use the boilerplate docs.
-/////////////////////////////////////////////////
-
-static const char* amps_message_class_docs =
-  "AMPS.Message represents a single message sent to or received from the "
-  "AMPS server. The class provides methods for every header that can be "
-  "present, whether or not that header will be populated or used in a "
-  "particular context.\n\n"
-  "Applications typically use an :class:`AMPS.Command` to create outgoing "
-  "requests to AMPS, and receive instances of :class:`AMPS.Message` in "
-  "response.\n\n"
-  "The AMPS Command Reference provides details on which headers are used "
-  "by AMPS and which will be populated on messages received from AMPS, "
-  "depending on the command the :class:`AMPS.Message` responds to, the options"
-  "and headers set on that command, and the type of the response message.\n\n"
-  ":class:`AMPS.Message` has been designed to minimize unnecessary memory "
-  "allocation. Copying a Message does not copy the underlying content "
-  "of the message. When the AMPS client provides a Message to a "
-  "message handler function, the data in that Message is a region "
-  "in the buffer that the AMPS client uses to read from the socket. If your "
-  "application will use the Message after the message handler returns, "
-  "you should use the :func:`__deepcopy__()` function to "
-  "copy the underlying data as well as the Message, since in this case the "
-  "AMPS client will reuse the underlying buffer once the MessageHandler "
-  "returns. See the AMPS Python Developer Guide section on asynchronous "
-  "message processing for more details.\n\n"
-  "If your application has the need to bypass most of the :class:`AMPS.Client` "
-  "infrastructure for some reason when sending commands to AMPS, the "
-  ":class:`AMPS.Message` / :func:`AMPS.Client.send()` interface provides the "
-  "flexibility to do so. In return, your application must provide "
-  "functionality that is normally provided automatically by the "
-  ":class:`AMPS.Client` (for example, tracking subscriptions for failover, "
-  "recording the message in the publish store and managing success or "
-  "failure of the publish, and so on). Although this functionality is "
-  "available for flexibility, it is rarely needed in practice. 60East "
-  "recommends using :class:`AMPS.Command` objects with "
-  ":func:`AMPS.Client.execute()` and "
-  ":func:`AMPS.Client.execute_async()` for sending commands to AMPS.\n\n" ;
-
-
-// BatchSize
-
-static const char* set_batch_size_docs =
-  "Sets the value of the BatchSize header, which is used to control the number of records that AMPS will send in a batch when returning the results of a SOW query. See the AMPS User Guide for details on SOW query batches."
-  SETTER_BOILERPLATE(batch_size) ;
-
-static const char* get_batch_size_docs = "Gets the value of the BatchSize header." GETTER_BOILERPLATE(batch_size) ;
-
-// Bookmark
-
-static const char* set_bookmark_docs  =
-  "Sets the value of the Bookmark header. For a subscription, this identifies the point at which to begin the replay. For a sow_delete (queue acknowledgement), this indicates the message or messages to acknowledge. For a query on a SOW topic with History configured, this indicates the point at which to query the topic."
-  SETTER_BOILERPLATE(bookmark);
-
-static const char* get_bookmark_docs =
-  "Gets the value of the Bookmark header. For messages returned from AMPS, this is an opaque identifier that AMPS can use to locate the message in the transaction log, and is returned on messages that are produced from the transaction log (for example, messages delivered from queues or returned in response to a bookmark subscribe command)."
-  GETTER_BOILERPLATE(bookmark);
-
-// ClientName
-
-static const char* set_client_name_docs = "Sets the value of the ClientName header. In a ``logon`` command, this header sets the client name for the connection." SETTER_BOILERPLATE(client_name);
-
-static const char* get_client_name_docs = STANDARD_GETTER_DOC(client_name);
-
-
-// Command
-
-static const char* set_command_docs =
-  "Sets the value of the `command` header. Every message sent to AMPS is required to have a `command` header set, which specifies how the message is to be intrepreted. It is an error to send a message to AMPS without setting this field.\n\nSee the AMPS Command Reference for details on the values that AMPS accepts for this header, how those commands are interpreted, and what headers and options can be set for a given command.\n\n"
-  ".. NOTE::\n\n"
-  "     If you are building a command to be sent to AMPS, using the AMPS.Command class rather than Message is recommended for most purposes.\n\n"
-  ":param: The new value for the Command.";
-
-static const char* get_command_docs =
-  "Gets the value of the *command* header, which specifies what type of message this is. Every message from AMPS has the Command header set, and should interpret the message based on the Command. See the AMPS Command reference for details on what Command values will be returned in response to a given command to AMPS, what header fields are provided on Messages with a given Command value, and how an application should interpret those header fields.\n\n:returns: The value of the Command set on this message.";
-
-
-// CorrelationId
-
-static const char* get_correlation_id_docs =
-  "Gets the value of the *correlation_id* header. The correlation ID is set when a command is provided to AMPS. The AMPS server does not process or interpret this value: the correlation ID is returned verbatim, as it was submitted with the command."
-  GETTER_BOILERPLATE(correlation_id);
-
-static const char* set_correlation_id_docs =
-  "Sets the value of the *correlation_id* header. The AMPS server does not process or interpret this value; however, the value set must contain only characters that are valid in Base64 encoding for the server to be guaranteed to process the Message."
-  SETTER_BOILERPLATE(correlation_id) ;
-
-// MessageType
-
-static const char* set_message_type_docs = "Sets the value of the *message_type* header. This header is used during logon to set the message type for the connection, and is ignored on other commands."
-                                           SETTER_BOILERPLATE(message_type) ;
-
-static const char* get_message_type_docs = STANDARD_GETTER_DOC(message_type);
-
-// SowKey
-
-static const char* set_sow_key_docs =
-  "Sets the value of the *sow_key* header. When publishing a message to a topic in the State of the World that is configured to require the publisher to set an explicit key (rather than having AMPS calculate the key based on the message contents), the publisher uses this header to set the key to be used."
-  SETTER_BOILERPLATE(sow_key) ;
-
-static const char* get_sow_key_docs =
-  "Gets the value of the *sow_key* header. When a message is returned from a Topic in the State of the World, this header provides the key that the AMPS server uses to identify the message."
-  GETTER_BOILERPLATE(sow_key) ;
-
-// SowKeys
-
-static const char* set_sow_keys_docs =
-  "Sets the value of the *sow_keys* header. When sending a command to AMPS that should only apply to specific items in a State of the World topic, the *sow_keys* header can restrict the effects of the command to just the items that have a SowKey that appears in this header."
-  SETTER_BOILERPLATE(sow_key);
-
-static const char* get_sow_keys_docs = STANDARD_GETTER_DOC(sow_keys);
-
-
-// Timestamp
-
-static const char* get_timestamp_docs =
-  "Gets the value of the *timestamp* header. When the ``timestamp`` option is specified on a command, ``publish`` and ``sow`` messages returned will have the time at which the AMPS server processed the message returned in this field."
-  GETTER_BOILERPLATE(timestamp);
-
-static const char* set_timestamp_docs =
-  "Sets the value of the *timestamp* header. This option is provided for use by the AMPS Client when constructing a message. No commands to the AMPS server use this header." SETTER_BOILERPLATE(
-    timestamp);
-
-// CommandId
-
-static const char* set_command_id_docs =
-  "Sets the value of the *command_id* header. This header is used to identify responses to the command. The AMPS FAQ has details on the relationship between command ID, subscription ID, and query ID."
-  GETTER_BOILERPLATE(command_id);
-
-static const char* get_command_id_docs = STANDARD_GETTER_DOC(command_id);
-
-// Expiration
-
-static const char* set_expiration_docs = "Sets the value of the *expiration* header. For a publish to a SOW topic or queue, this sets the number of seconds the message will be active before expiring."
-                                         SETTER_BOILERPLATE(expiration);
-
-static const char* get_expiration_docs = STANDARD_GETTER_DOC(expiration);
-
-STANDARD_DOC(ack_type, AckType)
-STANDARD_DOC(filter, Filter)
-STANDARD_DOC(group_seq_no, GroupSeqNo)
-STANDARD_DOC(heartbeat, Heartbeat)
-STANDARD_DOC(lease_period, LeasePeriod)
-STANDARD_DOC(matches, Matches)
-STANDARD_DOC(message_size, MessageSize)
-STANDARD_DOC(options, Options)
-STANDARD_DOC(order_by, OrderBy)
-STANDARD_DOC(password, Password)
-STANDARD_DOC(query_id, QueryId)
-STANDARD_DOC(reason, Reason)
-STANDARD_DOC(records_inserted, RecordsInserted)
-STANDARD_DOC(records_returned, RecordsReturned)
-STANDARD_DOC(records_updated, RecordsUpdated)
-STANDARD_DOC(sequence, Sequence)
-STANDARD_DOC(sow_deleted, SowDeleted)
-STANDARD_DOC(status, Status)
-STANDARD_DOC(sub_id, SubId)
-STANDARD_DOC(sub_ids, SubIds)
-STANDARD_DOC(timeout_interval, TimeoutInterval)
-STANDARD_DOC(top_n, TopN)
-STANDARD_DOC(topic, Topic)
-STANDARD_DOC(topic_matches, TopicMatches)
-STANDARD_DOC(user_id, UserId)
-STANDARD_DOC(version, Version)
-STANDARD_DOC(data, Data)
-
-
-// Doc strings for Message.Options class
-
-#define OPTIONS_REFERENCE " See the AMPS Command Reference and AMPS User Guide for details.\n\n"
-
-#define OPTIONS_CONSTANT_DOC(x) "Adds the ``" #x "`` option to the current set of options." \
-  OPTIONS_REFERENCE
-
-
-static const char* amps_message_options_class_docs =
-  "AMPS.Message.Options is a class that provides "
-  "convenience methods for constructing an options string for use in a command "
-  "to AMPS. This class is intended to help in formatting the options. It does not "
-  "validate the values provided, that the options apply to any particular command,"
-  "or that the options have a particular result. The AMPS Python client (and the "
-  "AMPS server itself) accept options as a string, so there is no requirement "
-  "to use this class to format options.\n\n"
-  ".. code-block:: python\n\n"
-  "   cmd = AMPS.Command(\"sow_and_subscribe\").set_topic(\"my_cool_topic\") \\ \n"
-  "             .set_options(str(AMPS.Message.Options().set_OOF().set_conflation(\"5s\") ))\n\n"
-  "\n\n"
-  ".. NOTE::\n\n"
-  "    Not every option applies to every command. See the AMPS User Guide and AMPS Command "
-  "    Reference for details on what options are available on a given command, and what "
-  "    effect the option has."
-  "\n\n"
-  ;
-
-
-static const char* amps_message_options_maxbacklog_docs =
-  "Sets the ``max_backlog`` option, the maximum number of unacknowledged queue messages that a "
-  "subscription is willing to accept at a given time. (The actual number of messages allowed "
-  "will be either this setting, or the per subscription maximum set for the queue, whichever is "
-  "smaller)." OPTIONS_REFERENCE
-  ":param value: the maximum backlog for the subscription\n\n"
-  ;
-
-static const char* amps_message_options_conflation_docs =
-  "Sets the ``conflation`` option as a time interval such as "
-  "``250ms`` or ``1m``." OPTIONS_REFERENCE
-  ":param value: the conflation interval to set\n\n"
-  ;
-
-static const char* amps_message_options_conflation_key_docs  =
-  "Sets the ``conflation_key`` for a subscription, as one or more XPath identifiers to use "
-  "to determine which messages are identical and should be conflated."
-  OPTIONS_REFERENCE
-  ":param value: the key or keys for the command to conflate on\n\n"
-  ;
-
-
-static const char* amps_message_options_top_n_docs =
-  "Sets the top_n value for a command."
-  OPTIONS_REFERENCE
-  ":param value: the top_n value, as an integer\n\n"
-  ;
-
-static const char* amps_message_options_rate_docs =
-  "Sets the ``rate`` option, which optionally controls the maximum rate at which "
-  "a transaction log replay will produce messages."
-  OPTIONS_REFERENCE
-  ":param value: the rate value as a message number, number of data bytes, or multiplier of the original message rate\n\n"
-  ;
-
-static const char* amps_message_options_rate_max_gap_docs =
-  "Sets the ``rate_max_gap`` option, which controls the amount of time AMPS will go without "
-  "producing a message from a transaction log replay when the ``rate`` option is specified."
-  OPTIONS_REFERENCE
-  ":param value: the maximum gap as an interval (such as ``30s``)\n\n"
-  ;
-
-static const char* amps_message_options_skip_n_docs =
-  "Sets the ``skip_n`` value for a command."
-  OPTIONS_REFERENCE
-  ":param value: the skip_n value as an integer\n\n"
-  ;
-
-static const char* amps_message_options_projection_docs =
-  "Sets the ``projection`` option, which defines the fields produced by an "
-  "aggregated subscription or aggregated query."
-  OPTIONS_REFERENCE
-  ":param value: the projection definition for the command\n\n"
-  ;
-
-static const char* amps_message_options_grouping_docs =
-  "Sets the ``grouping`` option, which defines how to group messages from the "
-  "original topic into result messages in an aggregated subscription or aggregated query."
-  OPTIONS_REFERENCE
-  ":param value: the grouping definition for the command\n\n"
-  ;
-