EvoScientist 0.0.1.dev3__py3-none-any.whl → 0.1.0rc1__py3-none-any.whl

EvoScientist/skills/ml-paper-writing/templates/acl/acl_latex.tex

@@ -1,377 +0,0 @@
-\documentclass[11pt]{article}
-
-% Change "review" to "final" to generate the final (sometimes called camera-ready) version.
-% Change to "preprint" to generate a non-anonymous version with page numbers.
-\usepackage[review]{acl}
-
-% Standard package includes
-\usepackage{times}
-\usepackage{latexsym}
-
-% For proper rendering and hyphenation of words containing Latin characters (including in bib files)
-\usepackage[T1]{fontenc}
-% For Vietnamese characters
-% \usepackage[T5]{fontenc}
-% See https://www.latex-project.org/help/documentation/encguide.pdf for other character sets
-
-% This assumes your files are encoded as UTF8
-\usepackage[utf8]{inputenc}
-
-% This is not strictly necessary, and may be commented out,
-% but it will improve the layout of the manuscript,
-% and will typically save some space.
-\usepackage{microtype}
-
-% This is also not strictly necessary, and may be commented out.
-% However, it will improve the aesthetics of text in
-% the typewriter font.
-\usepackage{inconsolata}
-
-%Including images in your LaTeX document requires adding
-%additional package(s)
-\usepackage{graphicx}
-
-% If the title and author information does not fit in the area allocated, uncomment the following
-%
-%\setlength\titlebox{<dim>}
-%
-% and set <dim> to something 5cm or larger.
-
-\title{Instructions for *ACL Proceedings}
-
-% Author information can be set in various styles:
-% For several authors from the same institution:
-% \author{Author 1 \and ... \and Author n \\
-%         Address line \\ ... \\ Address line}
-% if the names do not fit well on one line use
-%         Author 1 \\ {\bf Author 2} \\ ... \\ {\bf Author n} \\
-% For authors from different institutions:
-% \author{Author 1 \\ Address line \\  ... \\ Address line
-%         \And  ... \And
-%         Author n \\ Address line \\ ... \\ Address line}
-% To start a separate ``row'' of authors use \AND, as in
-% \author{Author 1 \\ Address line \\  ... \\ Address line
-%         \AND
-%         Author 2 \\ Address line \\ ... \\ Address line \And
-%         Author 3 \\ Address line \\ ... \\ Address line}
-
-\author{First Author \\
-  Affiliation / Address line 1 \\
-  Affiliation / Address line 2 \\
-  Affiliation / Address line 3 \\
-  \texttt{email@domain} \\\And
-  Second Author \\
-  Affiliation / Address line 1 \\
-  Affiliation / Address line 2 \\
-  Affiliation / Address line 3 \\
-  \texttt{email@domain} \\}
-
-%\author{
-%  \textbf{First Author\textsuperscript{1}},
-%  \textbf{Second Author\textsuperscript{1,2}},
-%  \textbf{Third T. Author\textsuperscript{1}},
-%  \textbf{Fourth Author\textsuperscript{1}},
-%\\
-%  \textbf{Fifth Author\textsuperscript{1,2}},
-%  \textbf{Sixth Author\textsuperscript{1}},
-%  \textbf{Seventh Author\textsuperscript{1}},
-%  \textbf{Eighth Author \textsuperscript{1,2,3,4}},
-%\\
-%  \textbf{Ninth Author\textsuperscript{1}},
-%  \textbf{Tenth Author\textsuperscript{1}},
-%  \textbf{Eleventh E. Author\textsuperscript{1,2,3,4,5}},
-%  \textbf{Twelfth Author\textsuperscript{1}},
-%\\
-%  \textbf{Thirteenth Author\textsuperscript{3}},
-%  \textbf{Fourteenth F. Author\textsuperscript{2,4}},
-%  \textbf{Fifteenth Author\textsuperscript{1}},
-%  \textbf{Sixteenth Author\textsuperscript{1}},
-%\\
-%  \textbf{Seventeenth S. Author\textsuperscript{4,5}},
-%  \textbf{Eighteenth Author\textsuperscript{3,4}},
-%  \textbf{Nineteenth N. Author\textsuperscript{2,5}},
-%  \textbf{Twentieth Author\textsuperscript{1}}
-%\\
-%\\
-%  \textsuperscript{1}Affiliation 1,
-%  \textsuperscript{2}Affiliation 2,
-%  \textsuperscript{3}Affiliation 3,
-%  \textsuperscript{4}Affiliation 4,
-%  \textsuperscript{5}Affiliation 5
-%\\
-%  \small{
-%    \textbf{Correspondence:} \href{mailto:email@domain}{email@domain}
-%  }
-%}
-
-\begin{document}
-\maketitle
-\begin{abstract}
-This document is a supplement to the general instructions for *ACL authors. It contains instructions for using the \LaTeX{} style files for ACL conferences.
-The document itself conforms to its own specifications, and is therefore an example of what your manuscript should look like.
-These instructions should be used both for papers submitted for review and for final versions of accepted papers.
-\end{abstract}
-
-\section{Introduction}
-
-These instructions are for authors submitting papers to *ACL conferences using \LaTeX. They are not self-contained. All authors must follow the general instructions for *ACL proceedings,\footnote{\url{http://acl-org.github.io/ACLPUB/formatting.html}} and this document contains additional instructions for the \LaTeX{} style files.
-
-The templates include the \LaTeX{} source of this document (\texttt{acl\_latex.tex}),
-the \LaTeX{} style file used to format it (\texttt{acl.sty}),
-an ACL bibliography style (\texttt{acl\_natbib.bst}),
-an example bibliography (\texttt{custom.bib}),
-and the bibliography for the ACL Anthology (\texttt{anthology.bib}).
-
-\section{Engines}
-
-To produce a PDF file, pdf\LaTeX{} is strongly recommended (over original \LaTeX{} plus dvips+ps2pdf or dvipdf).
-The style file \texttt{acl.sty} can also be used with
-lua\LaTeX{} and
-Xe\LaTeX{}, which are especially suitable for text in non-Latin scripts.
-The file \texttt{acl\_lualatex.tex} in this repository provides
-an example of how to use \texttt{acl.sty} with either
-lua\LaTeX{} or
-Xe\LaTeX{}.
-
-\section{Preamble}
-
-The first line of the file must be
-\begin{quote}
-\begin{verbatim}
-\documentclass[11pt]{article}
-\end{verbatim}
-\end{quote}
-
-To load the style file in the review version:
-\begin{quote}
-\begin{verbatim}
-\usepackage[review]{acl}
-\end{verbatim}
-\end{quote}
-For the final version, omit the \verb|review| option:
-\begin{quote}
-\begin{verbatim}
-\usepackage{acl}
-\end{verbatim}
-\end{quote}
-
-To use Times Roman, put the following in the preamble:
-\begin{quote}
-\begin{verbatim}
-\usepackage{times}
-\end{verbatim}
-\end{quote}
-(Alternatives like txfonts or newtx are also acceptable.)
-
-Please see the \LaTeX{} source of this document for comments on other packages that may be useful.
-
-Set the title and author using \verb|\title| and \verb|\author|. Within the author list, format multiple authors using \verb|\and| and \verb|\And| and \verb|\AND|; please see the \LaTeX{} source for examples.
-
-By default, the box containing the title and author names is set to the minimum of 5 cm. If you need more space, include the following in the preamble:
-\begin{quote}
-\begin{verbatim}
-\setlength\titlebox{<dim>}
-\end{verbatim}
-\end{quote}
-where \verb|<dim>| is replaced with a length. Do not set this length smaller than 5 cm.
-
-\section{Document Body}
-
-\subsection{Footnotes}
-
-Footnotes are inserted with the \verb|\footnote| command.\footnote{This is a footnote.}
-
-\subsection{Tables and figures}
-
-See Table~\ref{tab:accents} for an example of a table and its caption.
-\textbf{Do not override the default caption sizes.}
-
-\begin{table}
-  \centering
-  \begin{tabular}{lc}
-    \hline
-    \textbf{Command} & \textbf{Output} \\
-    \hline
-    \verb|{\"a}|     & {\"a}           \\
-    \verb|{\^e}|     & {\^e}           \\
-    \verb|{\`i}|     & {\`i}           \\
-    \verb|{\.I}|     & {\.I}           \\
-    \verb|{\o}|      & {\o}            \\
-    \verb|{\'u}|     & {\'u}           \\
-    \verb|{\aa}|     & {\aa}           \\\hline
-  \end{tabular}
-  \begin{tabular}{lc}
-    \hline
-    \textbf{Command} & \textbf{Output} \\
-    \hline
-    \verb|{\c c}|    & {\c c}          \\
-    \verb|{\u g}|    & {\u g}          \\
-    \verb|{\l}|      & {\l}            \\
-    \verb|{\~n}|     & {\~n}           \\
-    \verb|{\H o}|    & {\H o}          \\
-    \verb|{\v r}|    & {\v r}          \\
-    \verb|{\ss}|     & {\ss}           \\
-    \hline
-  \end{tabular}
-  \caption{Example commands for accented characters, to be used in, \emph{e.g.}, Bib\TeX{} entries.}
-  \label{tab:accents}
-\end{table}
-
-As much as possible, fonts in figures should conform
-to the document fonts. See Figure~\ref{fig:experiments} for an example of a figure and its caption.
-
-Using the \verb|graphicx| package graphics files can be included within figure
-environment at an appropriate point within the text.
-The \verb|graphicx| package supports various optional arguments to control the
-appearance of the figure.
-You must include it explicitly in the \LaTeX{} preamble (after the
-\verb|\documentclass| declaration and before \verb|\begin{document}|) using
-\verb|\usepackage{graphicx}|.
-
-\begin{figure}[t]
-  \includegraphics[width=\columnwidth]{example-image-golden}
-  \caption{A figure with a caption that runs for more than one line.
-    Example image is usually available through the \texttt{mwe} package
-    without even mentioning it in the preamble.}
-  \label{fig:experiments}
-\end{figure}
-
-\begin{figure*}[t]
-  \includegraphics[width=0.48\linewidth]{example-image-a} \hfill
-  \includegraphics[width=0.48\linewidth]{example-image-b}
-  \caption {A minimal working example to demonstrate how to place
-    two images side-by-side.}
-\end{figure*}
-
-\subsection{Hyperlinks}
-
-Users of older versions of \LaTeX{} may encounter the following error during compilation:
-\begin{quote}
-\verb|\pdfendlink| ended up in different nesting level than \verb|\pdfstartlink|.
-\end{quote}
-This happens when pdf\LaTeX{} is used and a citation splits across a page boundary. The best way to fix this is to upgrade \LaTeX{} to 2018-12-01 or later.
-
-\subsection{Citations}
-
-\begin{table*}
-  \centering
-  \begin{tabular}{lll}
-    \hline
-    \textbf{Output}           & \textbf{natbib command} & \textbf{ACL only command} \\
-    \hline
-    \citep{Gusfield:97}       & \verb|\citep|           &                           \\
-    \citealp{Gusfield:97}     & \verb|\citealp|         &                           \\
-    \citet{Gusfield:97}       & \verb|\citet|           &                           \\
-    \citeyearpar{Gusfield:97} & \verb|\citeyearpar|     &                           \\
-    \citeposs{Gusfield:97}    &                         & \verb|\citeposs|          \\
-    \hline
-  \end{tabular}
-  \caption{\label{citation-guide}
-    Citation commands supported by the style file.
-    The style is based on the natbib package and supports all natbib citation commands.
-    It also supports commands defined in previous ACL style files for compatibility.
-  }
-\end{table*}
-
-Table~\ref{citation-guide} shows the syntax supported by the style files.
-We encourage you to use the natbib styles.
-You can use the command \verb|\citet| (cite in text) to get ``author (year)'' citations, like this citation to a paper by \citet{Gusfield:97}.
-You can use the command \verb|\citep| (cite in parentheses) to get ``(author, year)'' citations \citep{Gusfield:97}.
-You can use the command \verb|\citealp| (alternative cite without parentheses) to get ``author, year'' citations, which is useful for using citations within parentheses (e.g. \citealp{Gusfield:97}).
-
-A possessive citation can be made with the command \verb|\citeposs|.
-This is not a standard natbib command, so it is generally not compatible
-with other style files.
-
-\subsection{References}
-
-\nocite{Ando2005,andrew2007scalable,rasooli-tetrault-2015}
-
-The \LaTeX{} and Bib\TeX{} style files provided roughly follow the American Psychological Association format.
-If your own bib file is named \texttt{custom.bib}, then placing the following before any appendices in your \LaTeX{} file will generate the references section for you:
-\begin{quote}
-\begin{verbatim}
-\bibliography{custom}
-\end{verbatim}
-\end{quote}
-
-You can obtain the complete ACL Anthology as a Bib\TeX{} file from \url{https://aclweb.org/anthology/anthology.bib.gz}.
-To include both the Anthology and your own .bib file, use the following instead of the above.
-\begin{quote}
-\begin{verbatim}
-\bibliography{anthology,custom}
-\end{verbatim}
-\end{quote}
-
-Please see Section~\ref{sec:bibtex} for information on preparing Bib\TeX{} files.
-
-\subsection{Equations}
-
-An example equation is shown below:
-\begin{equation}
-  \label{eq:example}
-  A = \pi r^2
-\end{equation}
-
-Labels for equation numbers, sections, subsections, figures and tables
-are all defined with the \verb|\label{label}| command and cross references
-to them are made with the \verb|\ref{label}| command.
-
-This an example cross-reference to Equation~\ref{eq:example}.
-
-\subsection{Appendices}
-
-Use \verb|\appendix| before any appendix section to switch the section numbering over to letters. See Appendix~\ref{sec:appendix} for an example.
-
-\section{Bib\TeX{} Files}
-\label{sec:bibtex}
-
-Unicode cannot be used in Bib\TeX{} entries, and some ways of typing special characters can disrupt Bib\TeX's alphabetization. The recommended way of typing special characters is shown in Table~\ref{tab:accents}.
-
-Please ensure that Bib\TeX{} records contain DOIs or URLs when possible, and for all the ACL materials that you reference.
-Use the \verb|doi| field for DOIs and the \verb|url| field for URLs.
-If a Bib\TeX{} entry has a URL or DOI field, the paper title in the references section will appear as a hyperlink to the paper, using the hyperref \LaTeX{} package.
-
-\section*{Limitations}
-
-This document does not cover the content requirements for ACL or any
-other specific venue.  Check the author instructions for
-information on
-maximum page lengths, the required ``Limitations'' section,
-and so on.
-
-\section*{Acknowledgments}
-
-This document has been adapted
-by Steven Bethard, Ryan Cotterell and Rui Yan
-from the instructions for earlier ACL and NAACL proceedings, including those for
-ACL 2019 by Douwe Kiela and Ivan Vuli\'{c},
-NAACL 2019 by Stephanie Lukin and Alla Roskovskaya,
-ACL 2018 by Shay Cohen, Kevin Gimpel, and Wei Lu,
-NAACL 2018 by Margaret Mitchell and Stephanie Lukin,
-Bib\TeX{} suggestions for (NA)ACL 2017/2018 from Jason Eisner,
-ACL 2017 by Dan Gildea and Min-Yen Kan,
-NAACL 2017 by Margaret Mitchell,
-ACL 2012 by Maggie Li and Michael White,
-ACL 2010 by Jing-Shin Chang and Philipp Koehn,
-ACL 2008 by Johanna D. Moore, Simone Teufel, James Allan, and Sadaoki Furui,
-ACL 2005 by Hwee Tou Ng and Kemal Oflazer,
-ACL 2002 by Eugene Charniak and Dekang Lin,
-and earlier ACL and EACL formats written by several people, including
-John Chen, Henry S. Thompson and Donald Walker.
-Additional elements were taken from the formatting instructions of the \emph{International Joint Conference on Artificial Intelligence} and the \emph{Conference on Computer Vision and Pattern Recognition}.
-
-% Bibliography entries for the entire Anthology, followed by custom entries
-%\bibliography{custom,anthology-overleaf-1,anthology-overleaf-2}
-
-% Custom bibliography entries only
-\bibliography{custom}
-
-\appendix
-
-\section{Example Appendix}
-\label{sec:appendix}
-
-This is an appendix.
-
-\end{document}

EvoScientist/skills/ml-paper-writing/templates/acl/acl_lualatex.tex

@@ -1,101 +0,0 @@
-% This file compiles with both LuaLaTeX and XeLaTeX
-\documentclass[11pt]{article}
-
-% Change "review" to "final" to generate the final (sometimes called camera-ready) version.
-% Change to "preprint" to generate a non-anonymous version with page numbers.
-\usepackage[review]{acl}
-
-% This is not strictly necessary, and may be commented out,
-% but it will improve the layout of the manuscript,
-% and will typically save some space.
- \usepackage{microtype}
-
-% If the title and author information does not fit in the area allocated, uncomment the following
-%
-%\setlength\titlebox{<dim>}
-%
-% and set <dim> to something 5cm or larger.
-
-% These font selection commands work with
-% LuaLaTeX and XeLaTeX, but not pdfLaTeX.
-\usepackage[english,bidi=default]{babel} % English as the main language.
-\babelfont{rm}{TeXGyreTermesX} % similar to Times
-%%% include whatever languages you need below this line
-\babelprovide[import]{hindi}
-\babelfont[*devanagari]{rm}{Lohit Devanagari}
-\babelprovide[import]{arabic}
-\babelfont[*arabic]{rm}{Noto Sans Arabic}
-
-
-%\usepackage{polyglossia}
-%\setdefaultlanguage{english}
-%\setotherlanguages{arabic,russian,thai,hindi,kannada}
-
-%%%%%
-
-
-\title{LuaLaTeX and XeLaTeX Template for *ACL Style Files}
-
-% Author information can be set in various styles:
-% For several authors from the same institution:
-% \author{Author 1 \and ... \and Author n \\
-%         Address line \\ ... \\ Address line}
-% if the names do not fit well on one line use
-%         Author 1 \\ {\bf Author 2} \\ ... \\ {\bf Author n} \\
-% For authors from different institutions:
-% \author{Author 1 \\ Address line \\  ... \\ Address line
-%         \And  ... \And
-%         Author n \\ Address line \\ ... \\ Address line}
-% To start a seperate ``row'' of authors use \AND, as in
-% \author{Author 1 \\ Address line \\  ... \\ Address line
-%         \AND
-%         Author 2 \\ Address line \\ ... \\ Address line \And
-%         Author 3 \\ Address line \\ ... \\ Address line}
-
-\author{First Author \\
-  Affiliation / Address line 1 \\
-  Affiliation / Address line 2 \\
-  Affiliation / Address line 3 \\
-  \texttt{email@domain} \\\And
-  Second Author \\
-  Affiliation / Address line 1 \\
-  Affiliation / Address line 2 \\
-  Affiliation / Address line 3 \\
-  \texttt{email@domain} \\}
-
-\begin{document}
-
-\maketitle
-\begin{abstract}
-This document provides an example showing how
-to use the *ACL style files with either
-LuaLaTeX or XeLaTeX.
-\end{abstract}
-
-
-\section{Introduction}
-
-Please see the general instructions
-in the file \verb|acl_latex.tex|.
-
-Here are some examples of text in various languages.
-
-Hindi: \foreignlanguage{hindi}{मानव अधिकारों की सार्वभौम घोषणा}
-
-Arabic: \foreignlanguage{arabic}{الإعلان العالمي لحقوق الإنسان}
-
-Here is an example citation:
-\citet{Gusfield:97} argues that...
-
-
-% Entries for the entire Anthology, followed by custom entries
-\bibliography{custom}
-
-\appendix
-
-\section{Example Appendix}
-\label{sec:appendix}
-
-This is an appendix.
-
-\end{document}