universal-physics-tensor 7.0.0 → 9.0.0

package/dist/bridges/be72-gravitational-redshift.js

@@ -1,32 +0,0 @@
-/**
- * BE-72 — gravitational frequency ratio of two static observers,
- *   ν1/ν2 = √(g2/g1),
- * both `g_00` negative, so `√(−g2)/√(−g1) = √(g2/g1)`.
- *
- * This is not BE-68. Equal temperatures on `g_00 = −1` and `g_00 = −4`
- * are not a Tolman equilibrium, while this ratio is 2. The nested
- * `tolman_same_ratio` theorem says the temperature ratio equals the
- * frequency ratio only when the Tolman products also agree. Neither
- * factor is derived from the other, and this module does not identify
- * them.
- *
- * The overlay formalRef is `PhysJS.GravitationalRedshift.frequency_ratio`.
- *
- * @module bridges/be72-gravitational-redshift
- */
-/**
- * Evaluate `ν1/ν2 = √(g2/g1)` for two negative metric components.
- *
- * @internal
- */
-export function evaluateGravitationalRedshift({ g1, g2, }) {
-    if (!Number.isFinite(g1) || g1 >= 0) {
-        throw new Error('evaluateGravitationalRedshift: g1 must be finite and < 0');
-    }
-    if (!Number.isFinite(g2) || g2 >= 0) {
-        throw new Error('evaluateGravitationalRedshift: g2 must be finite and < 0');
-    }
-    const frequency_ratio = Math.sqrt(g2 / g1);
-    return { g1, g2, frequency_ratio };
-}
-//# sourceMappingURL=be72-gravitational-redshift.js.map

package/dist/bridges/be72-gravitational-redshift.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be72-gravitational-redshift.js","sourceRoot":"","sources":["../../src/bridges/be72-gravitational-redshift.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;GAeG;AAwBH;;;;GAIG;AACH,MAAM,UAAU,6BAA6B,CAAC,EAC5C,EAAE,EACF,EAAE,GAC0B;IAC5B,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC;QACpC,MAAM,IAAI,KAAK,CAAC,0DAA0D,CAAC,CAAC;IAC9E,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,EAAE,CAAC,IAAI,EAAE,IAAI,CAAC,EAAE,CAAC;QACpC,MAAM,IAAI,KAAK,CAAC,0DAA0D,CAAC,CAAC;IAC9E,CAAC;IACD,MAAM,eAAe,GAAG,IAAI,CAAC,IAAI,CAAC,EAAE,GAAG,EAAE,CAAC,CAAC;IAC3C,OAAO,EAAE,EAAE,EAAE,EAAE,EAAE,eAAe,EAAE,CAAC;AACrC,CAAC"}

package/dist/bridges/be73-kelvin-peltier.d.ts

@@ -1,42 +0,0 @@
-/**
- * BE-73 — Kelvin relation,
- *   Π = S T,
- * the isothermal Peltier coefficient and the open-circuit Seebeck
- * coefficient. `L12 = L21` is `ThermoelectricOnsager.onsager`, a
- * structure field naming microscopic reversibility. It is not an axiom
- * and not a numeric input of this function. Without that equality the
- * two coefficients disagree, and this function does not invent the
- * disagreement.
- *
- * The first Thomson relation `μ = T dS/dT` is not this equation.
- * The overlay formalRef is `PhysJS.KelvinRelation.peltier_eq`.
- *
- * @module bridges/be73-kelvin-peltier
- */
-/**
- * Inputs for {@link evaluateKelvinPeltier}.
- * @internal
- */
-export interface KelvinPeltierInputs {
-    /** Seebeck coefficient, V/K. */
-    readonly S_V_per_K: number;
-    /** Absolute temperature, kelvin. */
-    readonly T_K: number;
-}
-/**
- * Result of {@link evaluateKelvinPeltier}.
- * @internal
- */
-export interface KelvinPeltierResult {
-    readonly S_V_per_K: number;
-    readonly T_K: number;
-    /** Peltier coefficient, V. */
-    readonly Pi_V: number;
-}
-/**
- * Evaluate `Π = S T`.
- *
- * @internal
- */
-export declare function evaluateKelvinPeltier({ S_V_per_K, T_K }: KelvinPeltierInputs): KelvinPeltierResult;
-//# sourceMappingURL=be73-kelvin-peltier.d.ts.map

package/dist/bridges/be73-kelvin-peltier.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be73-kelvin-peltier.d.ts","sourceRoot":"","sources":["../../src/bridges/be73-kelvin-peltier.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;GAcG;AAEH;;;GAGG;AACH,MAAM,WAAW,mBAAmB;IAClC,gCAAgC;IAChC,QAAQ,CAAC,SAAS,EAAE,MAAM,CAAC;IAC3B,oCAAoC;IACpC,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;CACtB;AAED;;;GAGG;AACH,MAAM,WAAW,mBAAmB;IAClC,QAAQ,CAAC,SAAS,EAAE,MAAM,CAAC;IAC3B,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,8BAA8B;IAC9B,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;CACvB;AAED;;;;GAIG;AACH,wBAAgB,qBAAqB,CAAC,EAAE,SAAS,EAAE,GAAG,EAAE,EAAE,mBAAmB,GAAG,mBAAmB,CASlG"}

package/dist/bridges/be73-kelvin-peltier.js

@@ -1,31 +0,0 @@
-/**
- * BE-73 — Kelvin relation,
- *   Π = S T,
- * the isothermal Peltier coefficient and the open-circuit Seebeck
- * coefficient. `L12 = L21` is `ThermoelectricOnsager.onsager`, a
- * structure field naming microscopic reversibility. It is not an axiom
- * and not a numeric input of this function. Without that equality the
- * two coefficients disagree, and this function does not invent the
- * disagreement.
- *
- * The first Thomson relation `μ = T dS/dT` is not this equation.
- * The overlay formalRef is `PhysJS.KelvinRelation.peltier_eq`.
- *
- * @module bridges/be73-kelvin-peltier
- */
-/**
- * Evaluate `Π = S T`.
- *
- * @internal
- */
-export function evaluateKelvinPeltier({ S_V_per_K, T_K }) {
-    if (!Number.isFinite(S_V_per_K)) {
-        throw new Error('evaluateKelvinPeltier: S_V_per_K must be finite');
-    }
-    if (!Number.isFinite(T_K) || T_K === 0) {
-        throw new Error('evaluateKelvinPeltier: T_K must be finite and nonzero');
-    }
-    const Pi_V = S_V_per_K * T_K;
-    return { S_V_per_K, T_K, Pi_V };
-}
-//# sourceMappingURL=be73-kelvin-peltier.js.map

package/dist/bridges/be73-kelvin-peltier.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be73-kelvin-peltier.js","sourceRoot":"","sources":["../../src/bridges/be73-kelvin-peltier.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;GAcG;AAwBH;;;;GAIG;AACH,MAAM,UAAU,qBAAqB,CAAC,EAAE,SAAS,EAAE,GAAG,EAAuB;IAC3E,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,SAAS,CAAC,EAAE,CAAC;QAChC,MAAM,IAAI,KAAK,CAAC,iDAAiD,CAAC,CAAC;IACrE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,GAAG,KAAK,CAAC,EAAE,CAAC;QACvC,MAAM,IAAI,KAAK,CAAC,uDAAuD,CAAC,CAAC;IAC3E,CAAC;IACD,MAAM,IAAI,GAAG,SAAS,GAAG,GAAG,CAAC;IAC7B,OAAO,EAAE,SAAS,EAAE,GAAG,EAAE,IAAI,EAAE,CAAC;AAClC,CAAC"}

package/dist/bridges/be74-magnetic-pressure.d.ts

@@ -1,27 +0,0 @@
-/**
- * Inputs for {@link evaluateMagneticPressure}.
- * @internal
- */
-export interface MagneticPressureInputs {
-    /** Magnetic flux density, tesla. The formula uses `B²`. */
-    readonly B_T: number;
-}
-/**
- * Result of {@link evaluateMagneticPressure}.
- * @internal
- */
-export interface MagneticPressureResult {
-    readonly B_T: number;
-    /** Magnetic pressure, pascal. */
-    readonly p_Pa: number;
-}
-/**
- * Evaluate `p_B = B² / (2 μ0)`.
- *
- * The factor 2 is the stored-energy half of the battery work. It is not
- * recovered from the dimensions of B and μ0.
- *
- * @internal
- */
-export declare function evaluateMagneticPressure({ B_T }: MagneticPressureInputs): MagneticPressureResult;
-//# sourceMappingURL=be74-magnetic-pressure.d.ts.map

package/dist/bridges/be74-magnetic-pressure.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be74-magnetic-pressure.d.ts","sourceRoot":"","sources":["../../src/bridges/be74-magnetic-pressure.ts"],"names":[],"mappings":"AAcA;;;GAGG;AACH,MAAM,WAAW,sBAAsB;IACrC,2DAA2D;IAC3D,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;CACtB;AAED;;;GAGG;AACH,MAAM,WAAW,sBAAsB;IACrC,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,iCAAiC;IACjC,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;CACvB;AAED;;;;;;;GAOG;AACH,wBAAgB,wBAAwB,CAAC,EAAE,GAAG,EAAE,EAAE,sBAAsB,GAAG,sBAAsB,CAMhG"}

package/dist/bridges/be74-magnetic-pressure.js

@@ -1,29 +0,0 @@
-/**
- * BE-74 — magnetic pressure of a long solenoid,
- *   p_B = B² / (2 μ0).
- *
- * The 2 is the inductor integral U = (L/2) I². Homogeneity in B and μ0
- * only gives p = C B²/μ0. C = 1 is the battery work per volume, not this
- * pressure. `μ0` is `1/(ε0 c²)`, the same product the Alfvén evaluator uses.
- *
- * The overlay formalRef is `PhysJS.MagneticPressure.pressure_eq`.
- *
- * @module bridges/be74-magnetic-pressure
- */
-import { MU0_SI } from '../dimensional/formula-names.js';
-/**
- * Evaluate `p_B = B² / (2 μ0)`.
- *
- * The factor 2 is the stored-energy half of the battery work. It is not
- * recovered from the dimensions of B and μ0.
- *
- * @internal
- */
-export function evaluateMagneticPressure({ B_T }) {
-    if (!Number.isFinite(B_T)) {
-        throw new Error('evaluateMagneticPressure: B_T must be finite');
-    }
-    const p_Pa = (B_T * B_T) / (2 * MU0_SI);
-    return { B_T, p_Pa };
-}
-//# sourceMappingURL=be74-magnetic-pressure.js.map

package/dist/bridges/be74-magnetic-pressure.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be74-magnetic-pressure.js","sourceRoot":"","sources":["../../src/bridges/be74-magnetic-pressure.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;GAWG;AACH,OAAO,EAAE,MAAM,EAAE,MAAM,iCAAiC,CAAC;AAqBzD;;;;;;;GAOG;AACH,MAAM,UAAU,wBAAwB,CAAC,EAAE,GAAG,EAA0B;IACtE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,EAAE,CAAC;QAC1B,MAAM,IAAI,KAAK,CAAC,8CAA8C,CAAC,CAAC;IAClE,CAAC;IACD,MAAM,IAAI,GAAG,CAAC,GAAG,GAAG,GAAG,CAAC,GAAG,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC;IACxC,OAAO,EAAE,GAAG,EAAE,IAAI,EAAE,CAAC;AACvB,CAAC"}

package/dist/bridges/be75-london-penetration.d.ts

@@ -1,27 +0,0 @@
-/**
- * Inputs for {@link evaluateLondonPenetration}.
- * @internal
- */
-export interface LondonPenetrationInputs {
-    /** Carrier mass, kg. */
-    readonly m_kg: number;
-    /** Carrier number density, m⁻³. */
-    readonly n_per_m3: number;
-}
-/**
- * Result of {@link evaluateLondonPenetration}.
- * @internal
- */
-export interface LondonPenetrationResult {
-    readonly m_kg: number;
-    readonly n_per_m3: number;
-    /** London depth, metres. */
-    readonly lambda_m: number;
-}
-/**
- * Evaluate `λ_L = √(m / (μ0 n e²))` with `e` the elementary charge.
- *
- * @internal
- */
-export declare function evaluateLondonPenetration({ m_kg, n_per_m3, }: LondonPenetrationInputs): LondonPenetrationResult;
-//# sourceMappingURL=be75-london-penetration.d.ts.map

package/dist/bridges/be75-london-penetration.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be75-london-penetration.d.ts","sourceRoot":"","sources":["../../src/bridges/be75-london-penetration.ts"],"names":[],"mappings":"AAgBA;;;GAGG;AACH,MAAM,WAAW,uBAAuB;IACtC,wBAAwB;IACxB,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,mCAAmC;IACnC,QAAQ,CAAC,QAAQ,EAAE,MAAM,CAAC;CAC3B;AAED;;;GAGG;AACH,MAAM,WAAW,uBAAuB;IACtC,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,QAAQ,CAAC,QAAQ,EAAE,MAAM,CAAC;IAC1B,4BAA4B;IAC5B,QAAQ,CAAC,QAAQ,EAAE,MAAM,CAAC;CAC3B;AAED;;;;GAIG;AACH,wBAAgB,yBAAyB,CAAC,EACxC,IAAI,EACJ,QAAQ,GACT,EAAE,uBAAuB,GAAG,uBAAuB,CASnD"}

package/dist/bridges/be75-london-penetration.js

@@ -1,31 +0,0 @@
-/**
- * BE-75 — London penetration depth,
- *   λ_L = √(m / (μ0 n e²)).
- *
- * `e` is the elementary charge. The dimension matrix of `{m, μ0, n, e}`
- * also admits `μ0 e²/m`, so units do not choose this root. Replacing `e`
- * by `2e` is not this depth. This is not the classical skin depth.
- *
- * `μ0` is `1/(ε0 c²)`. The overlay formalRef is
- * `PhysJS.LondonPenetration.depth_eq`.
- *
- * @module bridges/be75-london-penetration
- */
-import { E_SI } from '../core/constants.js';
-import { MU0_SI } from '../dimensional/formula-names.js';
-/**
- * Evaluate `λ_L = √(m / (μ0 n e²))` with `e` the elementary charge.
- *
- * @internal
- */
-export function evaluateLondonPenetration({ m_kg, n_per_m3, }) {
-    if (!Number.isFinite(m_kg) || m_kg <= 0) {
-        throw new Error('evaluateLondonPenetration: m_kg must be finite and > 0');
-    }
-    if (!Number.isFinite(n_per_m3) || n_per_m3 <= 0) {
-        throw new Error('evaluateLondonPenetration: n_per_m3 must be finite and > 0');
-    }
-    const lambda_m = Math.sqrt(m_kg / (MU0_SI * n_per_m3 * E_SI * E_SI));
-    return { m_kg, n_per_m3, lambda_m };
-}
-//# sourceMappingURL=be75-london-penetration.js.map

package/dist/bridges/be75-london-penetration.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be75-london-penetration.js","sourceRoot":"","sources":["../../src/bridges/be75-london-penetration.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;GAYG;AACH,OAAO,EAAE,IAAI,EAAE,MAAM,sBAAsB,CAAC;AAC5C,OAAO,EAAE,MAAM,EAAE,MAAM,iCAAiC,CAAC;AAwBzD;;;;GAIG;AACH,MAAM,UAAU,yBAAyB,CAAC,EACxC,IAAI,EACJ,QAAQ,GACgB;IACxB,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,IAAI,CAAC,EAAE,CAAC;QACxC,MAAM,IAAI,KAAK,CAAC,wDAAwD,CAAC,CAAC;IAC5E,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,QAAQ,CAAC,IAAI,QAAQ,IAAI,CAAC,EAAE,CAAC;QAChD,MAAM,IAAI,KAAK,CAAC,4DAA4D,CAAC,CAAC;IAChF,CAAC;IACD,MAAM,QAAQ,GAAG,IAAI,CAAC,IAAI,CAAC,IAAI,GAAG,CAAC,MAAM,GAAG,QAAQ,GAAG,IAAI,GAAG,IAAI,CAAC,CAAC,CAAC;IACrE,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,QAAQ,EAAE,CAAC;AACtC,CAAC"}

package/dist/bridges/be76-plasma-beta.d.ts

@@ -1,32 +0,0 @@
-/**
- * Inputs for {@link evaluatePlasmaBeta}.
- * @internal
- */
-export interface PlasmaBetaInputs {
-    /** Number density, m⁻³. */
-    readonly n_per_m3: number;
-    /** Temperature, kelvin. */
-    readonly T_K: number;
-    /**
-     * Magnetic pressure, pascal. This is `B²/(2 μ0)`, not `B²/μ0`.
-     */
-    readonly p_B_Pa: number;
-}
-/**
- * Result of {@link evaluatePlasmaBeta}.
- * @internal
- */
-export interface PlasmaBetaResult {
-    readonly n_per_m3: number;
-    readonly T_K: number;
-    readonly p_B_Pa: number;
-    /** Dimensionless pressure ratio. */
-    readonly beta: number;
-}
-/**
- * Evaluate `β = n k_B T / p_B`.
- *
- * @internal
- */
-export declare function evaluatePlasmaBeta({ n_per_m3, T_K, p_B_Pa }: PlasmaBetaInputs): PlasmaBetaResult;
-//# sourceMappingURL=be76-plasma-beta.d.ts.map

package/dist/bridges/be76-plasma-beta.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be76-plasma-beta.d.ts","sourceRoot":"","sources":["../../src/bridges/be76-plasma-beta.ts"],"names":[],"mappings":"AAgBA;;;GAGG;AACH,MAAM,WAAW,gBAAgB;IAC/B,2BAA2B;IAC3B,QAAQ,CAAC,QAAQ,EAAE,MAAM,CAAC;IAC1B,2BAA2B;IAC3B,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB;;OAEG;IACH,QAAQ,CAAC,MAAM,EAAE,MAAM,CAAC;CACzB;AAED;;;GAGG;AACH,MAAM,WAAW,gBAAgB;IAC/B,QAAQ,CAAC,QAAQ,EAAE,MAAM,CAAC;IAC1B,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,QAAQ,CAAC,MAAM,EAAE,MAAM,CAAC;IACxB,oCAAoC;IACpC,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;CACvB;AAED;;;;GAIG;AACH,wBAAgB,kBAAkB,CAAC,EAAE,QAAQ,EAAE,GAAG,EAAE,MAAM,EAAE,EAAE,gBAAgB,GAAG,gBAAgB,CAYhG"}

package/dist/bridges/be76-plasma-beta.js

@@ -1,34 +0,0 @@
-/**
- * BE-76 — plasma beta,
- *   β = p_gas / p_B = n k_B T / p_B,
- * where `p_B` is {@link evaluateMagneticPressure} (`B²/(2 μ0)`).
- *
- * The ideal-gas closure `p_gas = n k_B T` is a hypothesis. Substituting
- * the magnetic pressure gives `β = 2 μ0 n k_B T / B²`. Using `B²/μ0` in
- * place of `p_B` is half of this beta. This is not a plasma-β inequality
- * and not a unique monomial of `{n, T, B, μ0}`.
- *
- * The overlay formalRef is `PhysJS.PlasmaBeta.beta_eq`.
- *
- * @module bridges/be76-plasma-beta
- */
-import { K_B_SI } from '../core/constants.js';
-/**
- * Evaluate `β = n k_B T / p_B`.
- *
- * @internal
- */
-export function evaluatePlasmaBeta({ n_per_m3, T_K, p_B_Pa }) {
-    if (!Number.isFinite(n_per_m3)) {
-        throw new Error('evaluatePlasmaBeta: n_per_m3 must be finite');
-    }
-    if (!Number.isFinite(T_K)) {
-        throw new Error('evaluatePlasmaBeta: T_K must be finite');
-    }
-    if (!Number.isFinite(p_B_Pa) || p_B_Pa === 0) {
-        throw new Error('evaluatePlasmaBeta: p_B_Pa must be finite and nonzero');
-    }
-    const beta = (n_per_m3 * K_B_SI * T_K) / p_B_Pa;
-    return { n_per_m3, T_K, p_B_Pa, beta };
-}
-//# sourceMappingURL=be76-plasma-beta.js.map

package/dist/bridges/be76-plasma-beta.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be76-plasma-beta.js","sourceRoot":"","sources":["../../src/bridges/be76-plasma-beta.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;GAaG;AACH,OAAO,EAAE,MAAM,EAAE,MAAM,sBAAsB,CAAC;AA6B9C;;;;GAIG;AACH,MAAM,UAAU,kBAAkB,CAAC,EAAE,QAAQ,EAAE,GAAG,EAAE,MAAM,EAAoB;IAC5E,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,QAAQ,CAAC,EAAE,CAAC;QAC/B,MAAM,IAAI,KAAK,CAAC,6CAA6C,CAAC,CAAC;IACjE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,EAAE,CAAC;QAC1B,MAAM,IAAI,KAAK,CAAC,wCAAwC,CAAC,CAAC;IAC5D,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,IAAI,MAAM,KAAK,CAAC,EAAE,CAAC;QAC7C,MAAM,IAAI,KAAK,CAAC,uDAAuD,CAAC,CAAC;IAC3E,CAAC;IACD,MAAM,IAAI,GAAG,CAAC,QAAQ,GAAG,MAAM,GAAG,GAAG,CAAC,GAAG,MAAM,CAAC;IAChD,OAAO,EAAE,QAAQ,EAAE,GAAG,EAAE,MAAM,EAAE,IAAI,EAAE,CAAC;AACzC,CAAC"}

package/dist/bridges/be77-hagen-poiseuille.d.ts

@@ -1,50 +0,0 @@
-/**
- * BE-77 — Hagen–Poiseuille flux,
- *   Q = π R⁴ ΔP / (8 μ L).
- *
- * Steady axisymmetric Newtonian flow with d/dr (r du/dr) = (G/μ) r,
- * centerline slope 0, and no-slip u(R) = 0 integrates to the parabola.
- * G = −ΔP/L. The flux is the integral of that profile. Darcy's
- * definitions then give f_D Re = 64. The Fanning product is 16, and a
- * square duct is a different eigenvalue. Neither is this flux.
- *
- * The overlay formalRef is `PhysJS.HagenPoiseuille.flow_eq`.
- *
- * @module bridges/be77-hagen-poiseuille
- */
-/**
- * Inputs for {@link evaluateHagenPoiseuille}.
- * @internal
- */
-export interface HagenPoiseuilleInputs {
-    /** Pipe radius, metres. */
-    readonly R_m: number;
-    /** Pressure drop along the pipe, pascal. */
-    readonly deltaP_Pa: number;
-    /** Dynamic viscosity, pascal-seconds. Nonzero. */
-    readonly mu_Pa_s: number;
-    /** Pipe length, metres. Nonzero. */
-    readonly L_m: number;
-}
-/**
- * Result of {@link evaluateHagenPoiseuille}.
- * @internal
- */
-export interface HagenPoiseuilleResult {
-    readonly R_m: number;
-    readonly deltaP_Pa: number;
-    readonly mu_Pa_s: number;
-    readonly L_m: number;
-    /** Volume flux, cubic metres per second. */
-    readonly Q_m3_per_s: number;
-}
-/**
- * Evaluate `Q = π R⁴ ΔP / (8 μ L)`.
- *
- * The 8 is the integral of the no-slip parabola. It is not the Fanning
- * factor 16, and it is not a square-duct eigenvalue.
- *
- * @internal
- */
-export declare function evaluateHagenPoiseuille({ R_m, deltaP_Pa, mu_Pa_s, L_m, }: HagenPoiseuilleInputs): HagenPoiseuilleResult;
-//# sourceMappingURL=be77-hagen-poiseuille.d.ts.map

package/dist/bridges/be77-hagen-poiseuille.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be77-hagen-poiseuille.d.ts","sourceRoot":"","sources":["../../src/bridges/be77-hagen-poiseuille.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;GAaG;AAEH;;;GAGG;AACH,MAAM,WAAW,qBAAqB;IACpC,2BAA2B;IAC3B,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,4CAA4C;IAC5C,QAAQ,CAAC,SAAS,EAAE,MAAM,CAAC;IAC3B,kDAAkD;IAClD,QAAQ,CAAC,OAAO,EAAE,MAAM,CAAC;IACzB,oCAAoC;IACpC,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;CACtB;AAED;;;GAGG;AACH,MAAM,WAAW,qBAAqB;IACpC,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,QAAQ,CAAC,SAAS,EAAE,MAAM,CAAC;IAC3B,QAAQ,CAAC,OAAO,EAAE,MAAM,CAAC;IACzB,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,4CAA4C;IAC5C,QAAQ,CAAC,UAAU,EAAE,MAAM,CAAC;CAC7B;AAED;;;;;;;GAOG;AACH,wBAAgB,uBAAuB,CAAC,EACtC,GAAG,EACH,SAAS,EACT,OAAO,EACP,GAAG,GACJ,EAAE,qBAAqB,GAAG,qBAAqB,CAe/C"}

package/dist/bridges/be77-hagen-poiseuille.js

@@ -1,39 +0,0 @@
-/**
- * BE-77 — Hagen–Poiseuille flux,
- *   Q = π R⁴ ΔP / (8 μ L).
- *
- * Steady axisymmetric Newtonian flow with d/dr (r du/dr) = (G/μ) r,
- * centerline slope 0, and no-slip u(R) = 0 integrates to the parabola.
- * G = −ΔP/L. The flux is the integral of that profile. Darcy's
- * definitions then give f_D Re = 64. The Fanning product is 16, and a
- * square duct is a different eigenvalue. Neither is this flux.
- *
- * The overlay formalRef is `PhysJS.HagenPoiseuille.flow_eq`.
- *
- * @module bridges/be77-hagen-poiseuille
- */
-/**
- * Evaluate `Q = π R⁴ ΔP / (8 μ L)`.
- *
- * The 8 is the integral of the no-slip parabola. It is not the Fanning
- * factor 16, and it is not a square-duct eigenvalue.
- *
- * @internal
- */
-export function evaluateHagenPoiseuille({ R_m, deltaP_Pa, mu_Pa_s, L_m, }) {
-    if (!Number.isFinite(R_m) || R_m <= 0) {
-        throw new Error('evaluateHagenPoiseuille: R_m must be finite and > 0');
-    }
-    if (!Number.isFinite(deltaP_Pa)) {
-        throw new Error('evaluateHagenPoiseuille: deltaP_Pa must be finite');
-    }
-    if (!Number.isFinite(mu_Pa_s) || mu_Pa_s === 0) {
-        throw new Error('evaluateHagenPoiseuille: mu_Pa_s must be finite and nonzero');
-    }
-    if (!Number.isFinite(L_m) || L_m === 0) {
-        throw new Error('evaluateHagenPoiseuille: L_m must be finite and nonzero');
-    }
-    const Q_m3_per_s = (Math.PI * R_m ** 4 * deltaP_Pa) / (8 * mu_Pa_s * L_m);
-    return { R_m, deltaP_Pa, mu_Pa_s, L_m, Q_m3_per_s };
-}
-//# sourceMappingURL=be77-hagen-poiseuille.js.map

package/dist/bridges/be77-hagen-poiseuille.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be77-hagen-poiseuille.js","sourceRoot":"","sources":["../../src/bridges/be77-hagen-poiseuille.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;GAaG;AA8BH;;;;;;;GAOG;AACH,MAAM,UAAU,uBAAuB,CAAC,EACtC,GAAG,EACH,SAAS,EACT,OAAO,EACP,GAAG,GACmB;IACtB,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,GAAG,IAAI,CAAC,EAAE,CAAC;QACtC,MAAM,IAAI,KAAK,CAAC,qDAAqD,CAAC,CAAC;IACzE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,SAAS,CAAC,EAAE,CAAC;QAChC,MAAM,IAAI,KAAK,CAAC,mDAAmD,CAAC,CAAC;IACvE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,OAAO,CAAC,IAAI,OAAO,KAAK,CAAC,EAAE,CAAC;QAC/C,MAAM,IAAI,KAAK,CAAC,6DAA6D,CAAC,CAAC;IACjF,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,GAAG,KAAK,CAAC,EAAE,CAAC;QACvC,MAAM,IAAI,KAAK,CAAC,yDAAyD,CAAC,CAAC;IAC7E,CAAC;IACD,MAAM,UAAU,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,GAAG,IAAI,CAAC,GAAG,SAAS,CAAC,GAAG,CAAC,CAAC,GAAG,OAAO,GAAG,GAAG,CAAC,CAAC;IAC1E,OAAO,EAAE,GAAG,EAAE,SAAS,EAAE,OAAO,EAAE,GAAG,EAAE,UAAU,EAAE,CAAC;AACtD,CAAC"}

package/dist/bridges/be78-euler-buckling.d.ts

@@ -1,44 +0,0 @@
-/**
- * BE-78 — Euler buckling load of a pinned–pinned column,
- *   P_cr = π² E I / L².
- *
- * The Euler–Bernoulli balance y'' = −ω² y with ω² = P/(E I) and pinned
- * ends y(0) = y(L) = 0 has the eigenfunction sin(π x/L) at that load.
- * Every nontrivial solution has ω L = n π for a nonzero integer n, so
- * the load is at least this value. The clamped-free column is
- * π² E I/(4 L²). That factor is not this load.
- *
- * The overlay formalRef is `PhysJS.EulerBuckling.critical_load`.
- *
- * @module bridges/be78-euler-buckling
- */
-/**
- * Inputs for {@link evaluateEulerBuckling}.
- * @internal
- */
-export interface EulerBucklingInputs {
-    /** Young's modulus, pascal. */
-    readonly E_Pa: number;
-    /** Second moment of area, metres⁴. */
-    readonly I_m4: number;
-    /** Column length between pinned ends, metres. */
-    readonly L_m: number;
-}
-/**
- * Result of {@link evaluateEulerBuckling}.
- * @internal
- */
-export interface EulerBucklingResult {
-    readonly E_Pa: number;
-    readonly I_m4: number;
-    readonly L_m: number;
-    /** Lowest pinned–pinned critical load, newtons. */
-    readonly P_N: number;
-}
-/**
- * Evaluate `P_cr = π² E I / L²` for pinned ends.
- *
- * @internal
- */
-export declare function evaluateEulerBuckling({ E_Pa, I_m4, L_m }: EulerBucklingInputs): EulerBucklingResult;
-//# sourceMappingURL=be78-euler-buckling.d.ts.map

package/dist/bridges/be78-euler-buckling.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be78-euler-buckling.d.ts","sourceRoot":"","sources":["../../src/bridges/be78-euler-buckling.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;GAaG;AAEH;;;GAGG;AACH,MAAM,WAAW,mBAAmB;IAClC,+BAA+B;IAC/B,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,sCAAsC;IACtC,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,iDAAiD;IACjD,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;CACtB;AAED;;;GAGG;AACH,MAAM,WAAW,mBAAmB;IAClC,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,mDAAmD;IACnD,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;CACtB;AAED;;;;GAIG;AACH,wBAAgB,qBAAqB,CAAC,EAAE,IAAI,EAAE,IAAI,EAAE,GAAG,EAAE,EAAE,mBAAmB,GAAG,mBAAmB,CAYnG"}

package/dist/bridges/be78-euler-buckling.js

@@ -1,33 +0,0 @@
-/**
- * BE-78 — Euler buckling load of a pinned–pinned column,
- *   P_cr = π² E I / L².
- *
- * The Euler–Bernoulli balance y'' = −ω² y with ω² = P/(E I) and pinned
- * ends y(0) = y(L) = 0 has the eigenfunction sin(π x/L) at that load.
- * Every nontrivial solution has ω L = n π for a nonzero integer n, so
- * the load is at least this value. The clamped-free column is
- * π² E I/(4 L²). That factor is not this load.
- *
- * The overlay formalRef is `PhysJS.EulerBuckling.critical_load`.
- *
- * @module bridges/be78-euler-buckling
- */
-/**
- * Evaluate `P_cr = π² E I / L²` for pinned ends.
- *
- * @internal
- */
-export function evaluateEulerBuckling({ E_Pa, I_m4, L_m }) {
-    if (!Number.isFinite(E_Pa) || E_Pa <= 0) {
-        throw new Error('evaluateEulerBuckling: E_Pa must be finite and > 0');
-    }
-    if (!Number.isFinite(I_m4) || I_m4 <= 0) {
-        throw new Error('evaluateEulerBuckling: I_m4 must be finite and > 0');
-    }
-    if (!Number.isFinite(L_m) || L_m <= 0) {
-        throw new Error('evaluateEulerBuckling: L_m must be finite and > 0');
-    }
-    const P_N = (Math.PI ** 2 * E_Pa * I_m4) / (L_m * L_m);
-    return { E_Pa, I_m4, L_m, P_N };
-}
-//# sourceMappingURL=be78-euler-buckling.js.map

package/dist/bridges/be78-euler-buckling.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be78-euler-buckling.js","sourceRoot":"","sources":["../../src/bridges/be78-euler-buckling.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;GAaG;AA2BH;;;;GAIG;AACH,MAAM,UAAU,qBAAqB,CAAC,EAAE,IAAI,EAAE,IAAI,EAAE,GAAG,EAAuB;IAC5E,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,IAAI,CAAC,EAAE,CAAC;QACxC,MAAM,IAAI,KAAK,CAAC,oDAAoD,CAAC,CAAC;IACxE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,IAAI,CAAC,EAAE,CAAC;QACxC,MAAM,IAAI,KAAK,CAAC,oDAAoD,CAAC,CAAC;IACxE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,GAAG,IAAI,CAAC,EAAE,CAAC;QACtC,MAAM,IAAI,KAAK,CAAC,mDAAmD,CAAC,CAAC;IACvE,CAAC;IACD,MAAM,GAAG,GAAG,CAAC,IAAI,CAAC,EAAE,IAAI,CAAC,GAAG,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,GAAG,GAAG,GAAG,CAAC,CAAC;IACvD,OAAO,EAAE,IAAI,EAAE,IAAI,EAAE,GAAG,EAAE,GAAG,EAAE,CAAC;AAClC,CAAC"}

package/dist/bridges/be79-pull-in.d.ts

@@ -1,33 +0,0 @@
-/**
- * Inputs for {@link evaluatePullIn}.
- * @internal
- */
-export interface PullInInputs {
-    /** Linear spring stiffness, newtons per metre. */
-    readonly k_N_per_m: number;
-    /** Rest gap, metres. */
-    readonly g0_m: number;
-    /** Plate area, square metres. */
-    readonly A_m2: number;
-}
-/**
- * Result of {@link evaluatePullIn}.
- * @internal
- */
-export interface PullInResult {
-    readonly k_N_per_m: number;
-    readonly g0_m: number;
-    readonly A_m2: number;
-    /** Pull-in voltage, volts. The positive square root. */
-    readonly V_pi_V: number;
-}
-/**
- * Evaluate `V_pi = √(8 k g0³ / (27 ε0 A))`.
- *
- * `ε0` is the vacuum permittivity. The gap at the fold is `2 g0/3`,
- * not `g0/2`. Fringing is not in the theorem.
- *
- * @internal
- */
-export declare function evaluatePullIn({ k_N_per_m, g0_m, A_m2 }: PullInInputs): PullInResult;
-//# sourceMappingURL=be79-pull-in.d.ts.map

package/dist/bridges/be79-pull-in.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be79-pull-in.d.ts","sourceRoot":"","sources":["../../src/bridges/be79-pull-in.ts"],"names":[],"mappings":"AAcA;;;GAGG;AACH,MAAM,WAAW,YAAY;IAC3B,kDAAkD;IAClD,QAAQ,CAAC,SAAS,EAAE,MAAM,CAAC;IAC3B,wBAAwB;IACxB,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,iCAAiC;IACjC,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;CACvB;AAED;;;GAGG;AACH,MAAM,WAAW,YAAY;IAC3B,QAAQ,CAAC,SAAS,EAAE,MAAM,CAAC;IAC3B,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,wDAAwD;IACxD,QAAQ,CAAC,MAAM,EAAE,MAAM,CAAC;CACzB;AAED;;;;;;;GAOG;AACH,wBAAgB,cAAc,CAAC,EAAE,SAAS,EAAE,IAAI,EAAE,IAAI,EAAE,EAAE,YAAY,GAAG,YAAY,CAYpF"}

package/dist/bridges/be79-pull-in.js

@@ -1,35 +0,0 @@
-/**
- * BE-79 — parallel-plate pull-in voltage,
- *   V_pi² = 8 k g0³ / (27 ε0 A).
- *
- * C = ε0 A/g has dC/dg = −ε0 A/g². Equilibrium of a linear spring
- * against the coenergy force is k(g0−g) = ε0 A V²/(2 g²). The fold is
- * g = 2 g0/3. g = g0/2 is not the fold. Not a fringing field.
- *
- * The overlay formalRef is `PhysJS.PullIn.pull_in_eq`.
- *
- * @module bridges/be79-pull-in
- */
-import { EPS0_SI } from '../dimensional/formula-names.js';
-/**
- * Evaluate `V_pi = √(8 k g0³ / (27 ε0 A))`.
- *
- * `ε0` is the vacuum permittivity. The gap at the fold is `2 g0/3`,
- * not `g0/2`. Fringing is not in the theorem.
- *
- * @internal
- */
-export function evaluatePullIn({ k_N_per_m, g0_m, A_m2 }) {
-    if (!Number.isFinite(k_N_per_m) || k_N_per_m <= 0) {
-        throw new Error('evaluatePullIn: k_N_per_m must be finite and > 0');
-    }
-    if (!Number.isFinite(g0_m) || g0_m <= 0) {
-        throw new Error('evaluatePullIn: g0_m must be finite and > 0');
-    }
-    if (!Number.isFinite(A_m2) || A_m2 <= 0) {
-        throw new Error('evaluatePullIn: A_m2 must be finite and > 0');
-    }
-    const V_pi_V = Math.sqrt((8 * k_N_per_m * g0_m ** 3) / (27 * EPS0_SI * A_m2));
-    return { k_N_per_m, g0_m, A_m2, V_pi_V };
-}
-//# sourceMappingURL=be79-pull-in.js.map

package/dist/bridges/be79-pull-in.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"be79-pull-in.js","sourceRoot":"","sources":["../../src/bridges/be79-pull-in.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;GAWG;AACH,OAAO,EAAE,OAAO,EAAE,MAAM,iCAAiC,CAAC;AA2B1D;;;;;;;GAOG;AACH,MAAM,UAAU,cAAc,CAAC,EAAE,SAAS,EAAE,IAAI,EAAE,IAAI,EAAgB;IACpE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,SAAS,CAAC,IAAI,SAAS,IAAI,CAAC,EAAE,CAAC;QAClD,MAAM,IAAI,KAAK,CAAC,kDAAkD,CAAC,CAAC;IACtE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,IAAI,CAAC,EAAE,CAAC;QACxC,MAAM,IAAI,KAAK,CAAC,6CAA6C,CAAC,CAAC;IACjE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,IAAI,IAAI,CAAC,EAAE,CAAC;QACxC,MAAM,IAAI,KAAK,CAAC,6CAA6C,CAAC,CAAC;IACjE,CAAC;IACD,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,SAAS,GAAG,IAAI,IAAI,CAAC,CAAC,GAAG,CAAC,EAAE,GAAG,OAAO,GAAG,IAAI,CAAC,CAAC,CAAC;IAC9E,OAAO,EAAE,SAAS,EAAE,IAAI,EAAE,IAAI,EAAE,MAAM,EAAE,CAAC;AAC3C,CAAC"}

package/dist/bridges/be80-mott-gurney.d.ts

@@ -1,52 +0,0 @@
-/**
- * BE-80 — Mott–Gurney current,
- *   J = (9/8) ε μ V² / d³.
- *
- * Drift J = q n μ E and Poisson dE/dx = q n/ε give E dE/dx = J/(ε μ).
- * With E(0) = 0 the integral is E²/2 = J x/(ε μ). The nonnegative root
- * from 0 to d is this current. A factor other than 9/8 is not this
- * current. Not Child–Langmuir.
- *
- * The overlay formalRef is `PhysJS.MottGurney.current_eq`.
- *
- * @module bridges/be80-mott-gurney
- */
-/**
- * Inputs for {@link evaluateMottGurney}.
- * @internal
- */
-export interface MottGurneyInputs {
-    /**
-     * Permittivity of the solid, farads per metre. The evaluate key is `eps`.
-     * The declared unit is F/m.
-     */
-    readonly eps: number;
-    /** Drift mobility, square metres per volt-second. */
-    readonly mu_m2_per_Vs: number;
-    /** Applied voltage, volts. The formula uses V². */
-    readonly V_volts: number;
-    /** Thickness, metres. */
-    readonly d_m: number;
-}
-/**
- * Result of {@link evaluateMottGurney}.
- * @internal
- */
-export interface MottGurneyResult {
-    readonly eps: number;
-    readonly mu_m2_per_Vs: number;
-    readonly V_volts: number;
-    readonly d_m: number;
-    /** Current density, amperes per square metre. */
-    readonly J_A_per_m2: number;
-}
-/**
- * Evaluate `J = (9/8) ε μ V² / d³`.
- *
- * Drift, Poisson, and the injecting contact E(0) = 0 are hypotheses.
- * This is not the Child–Langmuir current.
- *
- * @internal
- */
-export declare function evaluateMottGurney({ eps, mu_m2_per_Vs, V_volts, d_m, }: MottGurneyInputs): MottGurneyResult;
-//# sourceMappingURL=be80-mott-gurney.d.ts.map

package/dist/bridges/be80-mott-gurney.d.ts.map

@@ -1 +0,0 @@
-{"version":3,"file":"be80-mott-gurney.d.ts","sourceRoot":"","sources":["../../src/bridges/be80-mott-gurney.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;GAYG;AAEH;;;GAGG;AACH,MAAM,WAAW,gBAAgB;IAC/B;;;OAGG;IACH,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,qDAAqD;IACrD,QAAQ,CAAC,YAAY,EAAE,MAAM,CAAC;IAC9B,mDAAmD;IACnD,QAAQ,CAAC,OAAO,EAAE,MAAM,CAAC;IACzB,yBAAyB;IACzB,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;CACtB;AAED;;;GAGG;AACH,MAAM,WAAW,gBAAgB;IAC/B,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,QAAQ,CAAC,YAAY,EAAE,MAAM,CAAC;IAC9B,QAAQ,CAAC,OAAO,EAAE,MAAM,CAAC;IACzB,QAAQ,CAAC,GAAG,EAAE,MAAM,CAAC;IACrB,iDAAiD;IACjD,QAAQ,CAAC,UAAU,EAAE,MAAM,CAAC;CAC7B;AAED;;;;;;;GAOG;AACH,wBAAgB,kBAAkB,CAAC,EACjC,GAAG,EACH,YAAY,EACZ,OAAO,EACP,GAAG,GACJ,EAAE,gBAAgB,GAAG,gBAAgB,CAerC"}