specweave 0.33.5 → 0.34.0

package/plugins/specweave/commands/{specweave-abandon.md → abandon.md}

@@ -1,12 +1,12 @@
 ---
-name: specweave:abandon
+name: sw:abandon
 description: Abandon an incomplete increment (requirements changed, obsolete)
-usage: /specweave:abandon <increment-id> --reason="<reason>"
+usage: /sw:abandon <increment-id> --reason="<reason>"
 ---
 
 # Abandon Increment Command
 
-**Usage**: `/specweave:abandon <increment-id> --reason="<reason>"`
+**Usage**: `/sw:abandon <increment-id> --reason="<reason>"`
 
 ⚠️  **THIS ACTION MOVES THE INCREMENT TO `_archive/` FOLDER**
 
@@ -42,7 +42,7 @@ Abandon an increment when:
 
 ### Abandon with reason
 ```bash
-/specweave:abandon 0008 --reason="Requirements changed - feature no longer needed"
+/sw:abandon 0008 --reason="Requirements changed - feature no longer needed"
 
 ⚠️  This will move increment 0008 to _archive/
    Reason: Requirements changed - feature no longer needed
@@ -59,7 +59,7 @@ Continue? [y/N]: y
 
 ### Abandon without reason (prompts)
 ```bash
-/specweave:abandon 0009
+/sw:abandon 0009
 
 ❓ Why are you abandoning this increment?
    1. Requirements changed
@@ -85,7 +85,7 @@ Continue? [y/N]: y
 
 ### Cannot Abandon Completed
 ```bash
-/specweave:abandon 0005
+/sw:abandon 0005
 
 ❌ Cannot abandon increment 0005
    Status: completed
@@ -96,7 +96,7 @@ Continue? [y/N]: y
 
 ### Already Abandoned
 ```bash
-/specweave:abandon 0008
+/sw:abandon 0008
 
 ⚠️  Increment 0008 is already abandoned
    Location: .specweave/increments/_abandoned/0008-old-feature/
@@ -107,15 +107,15 @@ No action needed.
 
 ### Increment Not Found
 ```bash
-/specweave:abandon 9999
+/sw:abandon 9999
 
 ❌ Increment not found: 9999
-💡 Check available increments: /specweave:status
+💡 Check available increments: /sw:status
 ```
 
 ### Cancel Abandonment
 ```bash
-/specweave:abandon 0008 --reason="Not needed"
+/sw:abandon 0008 --reason="Not needed"
 
 ⚠️  This will move increment 0008 to _archive/
    Reason: Not needed
@@ -211,7 +211,7 @@ mv .specweave/increments/_archive/0008-feature \
    .specweave/increments/0008-feature
 
 # 2. Resume via command
-/specweave:resume 0008
+/sw:resume 0008
 
 ✅ Increment 0008 resumed
 ⚠️  Note: Was abandoned 10 days ago
@@ -223,10 +223,10 @@ mv .specweave/increments/_archive/0008-feature \
 
 ## Related Commands
 
-- `/specweave:pause <id>` - Pause increment (temporary, can resume)
-- `/specweave:resume <id>` - Resume paused or abandoned increment
-- `/specweave:status` - Show all increments (including abandoned count)
-- `/specweave:status --abandoned` - Show only abandoned increments
+- `/sw:pause <id>` - Pause increment (temporary, can resume)
+- `/sw:resume <id>` - Resume paused or abandoned increment
+- `/sw:status` - Show all increments (including abandoned count)
+- `/sw:status --abandoned` - Show only abandoned increments
 
 ---
 
@@ -252,12 +252,12 @@ Experiments (--type=experiment) auto-abandon after **14 days** of inactivity:
 
 ```bash
 # Create experiment
-/specweave:inc "Try GraphQL" --type=experiment
+/sw:inc "Try GraphQL" --type=experiment
 
 # ... 15 days pass with no activity ...
 
 # Automatic abandonment
-/specweave:status
+/sw:status
 
 📊 Auto-Abandoned (1):
   🧪 0010-graphql-experiment [experiment]
@@ -266,7 +266,7 @@ Experiments (--type=experiment) auto-abandon after **14 days** of inactivity:
      Last activity: 15 days ago
 
 💡 Experiments auto-abandon after 14 days of inactivity
-   To prevent: Update lastActivity via /specweave:do or manual touch
+   To prevent: Update lastActivity via /sw:do or manual touch
 ```
 
 ---
@@ -276,7 +276,7 @@ Experiments (--type=experiment) auto-abandon after **14 days** of inactivity:
 View abandonment statistics:
 
 ```bash
-/specweave:status
+/sw:status
 
 ✅ Completed (4):
   0001-core-framework
@@ -310,7 +310,7 @@ Abandoned work is valuable!
 
 ---
 
-**Command**: `/specweave:abandon`
+**Command**: `/sw:abandon`
 **Plugin**: specweave (core)
 **Version**: v0.7.0+
 **Part of**: Increment 0007 - Smart Status Management

package/plugins/specweave/commands/{specweave-analyze-standards.sh → analyze-standards.sh}

@@ -2,7 +2,7 @@
 # ---
 # name: specweave-analyze-standards
 # description: Analyze and document coding standards from codebase. Detects naming conventions, import patterns, type usage, and anti-patterns. Generates evidence-based standards documentation with confidence levels. Supports full analysis, drift detection, and standards updates.
-# usage: /specweave:analyze-standards [--drift] [--update] [--verbose]
+# usage: /sw:analyze-standards [--drift] [--update] [--verbose]
 # ---
 
 set -e
@@ -40,7 +40,7 @@ while [[ $# -gt 0 ]]; do
       ;;
     *)
       echo "❌ Unknown option: $1"
-      echo "Usage: /specweave:analyze-standards [--drift] [--update] [--verbose]"
+      echo "Usage: /sw:analyze-standards [--drift] [--update] [--verbose]"
       exit 1
       ;;
   esac
@@ -148,7 +148,7 @@ AGENT_PROMPT
       echo "❌ Error: No coding standards found at:"
       echo "   $GOVERNANCE_DIR/coding-standards.md"
       echo ""
-      echo "💡 Tip: Run /specweave:analyze-standards first to generate baseline standards"
+      echo "💡 Tip: Run /sw:analyze-standards first to generate baseline standards"
       exit 1
     fi
 
@@ -299,7 +299,7 @@ case $MODE in
   full)
     echo "   1. Review the analysis report"
     echo "   2. Fix critical issues (hardcoded secrets, etc.)"
-    echo "   3. Run /specweave:analyze-standards --update to formalize"
+    echo "   3. Run /sw:analyze-standards --update to formalize"
     ;;
   drift)
     echo "   1. Review drift report"

package/plugins/specweave/commands/{specweave-archive-features.md → archive-features.md}

@@ -1,5 +1,5 @@
 ---
-name: specweave:archive-features
+name: sw:archive-features
 description: Archive features and epics when all related increments are archived
 ---
 
@@ -10,7 +10,7 @@ Archive features and epics based on their increment archive status. Features are
 ## Usage
 
 ```bash
-/specweave:archive-features [options]
+/sw:archive-features [options]
 ```
 
 ## Options
@@ -25,16 +25,16 @@ Archive features and epics based on their increment archive status. Features are
 
 ```bash
 # Preview what would be archived
-/specweave:archive-features --dry-run
+/sw:archive-features --dry-run
 
 # Archive features and update all links
-/specweave:archive-features
+/sw:archive-features
 
 # Archive including orphaned features
-/specweave:archive-features --orphaned
+/sw:archive-features --orphaned
 
 # Archive with custom reason for audit trail (AC-US13-07)
-/specweave:archive-features --reason="Obsolete after product pivot"
+/sw:archive-features --reason="Obsolete after product pivot"
 ```
 
 ## Archive Rules
@@ -67,7 +67,7 @@ Archive features and epics based on their increment archive status. Features are
 
 - Archives are LOCAL ONLY (not synced to GitHub/JIRA/ADO)
 - All links are automatically updated to point to archive locations
-- Use `/specweave:restore-feature FS-001` to restore from archive
+- Use `/sw:restore-feature FS-001` to restore from archive
 
 ## Implementation
 

package/plugins/specweave/commands/{specweave-archive.md → archive.md}

@@ -1,5 +1,5 @@
 ---
-name: specweave:archive
+name: sw:archive
 description: Manually archive completed increments and sync living docs - NEVER auto-archives, explicit user action only
 ---
 
@@ -32,22 +32,22 @@ This command automatically synchronizes living docs by archiving features in:
 
 ```bash
 # Archive specific increment
-/specweave:archive 0031
+/sw:archive 0031
 
 # Archive multiple increments
-/specweave:archive 0001 0002 0003
+/sw:archive 0001 0002 0003
 
 # Archive all completed increments older than N days
-/specweave:archive --older-than 90
+/sw:archive --older-than 90
 
 # Keep last N increments, archive the rest
-/specweave:archive --keep-last 10
+/sw:archive --keep-last 10
 
 # Archive by pattern
-/specweave:archive --pattern "auth-*"
+/sw:archive --pattern "auth-*"
 
 # Dry run (preview without archiving)
-/specweave:archive --dry-run --older-than 90
+/sw:archive --dry-run --older-than 90
 ```
 
 ## Options
@@ -71,16 +71,16 @@ External features are identified by the `E` suffix (e.g., `FS-001E`, `FS-042E`).
 
 ```bash
 # Archive specific external features
-/specweave:archive --external FS-001E FS-002E
+/sw:archive --external FS-001E FS-002E
 
 # Archive external features older than 90 days
-/specweave:archive --external --older-than 90
+/sw:archive --external --older-than 90
 
 # Keep last 10 external features, archive the rest
-/specweave:archive --external --keep-last 10
+/sw:archive --external --keep-last 10
 
 # Preview external archive (dry run)
-/specweave:archive --external --dry-run --keep-last 5
+/sw:archive --external --dry-run --keep-last 5
 ```
 
 ### Why Separate External Archiving?
@@ -95,14 +95,14 @@ External features are identified by the `E` suffix (e.g., `FS-001E`, `FS-042E`).
 **Default `--keep-last 5`**: When called without any filtering options (no increment IDs, no pattern, no `--older-than`, no `--archive-completed`), the archiver **automatically defaults to `--keep-last 5`** to prevent accidentally archiving ALL increments.
 
 This safety feature ensures:
-- ✅ Running `/specweave:archive` without options won't archive everything
+- ✅ Running `/sw:archive` without options won't archive everything
 - ✅ Last 5 increments always remain visible for easy reference
 - ✅ Explicit criteria required to archive recent work
 
 ## Archive Rules
 
 ### Increments are archived when:
-1. Explicitly specified by ID (e.g., `/specweave:archive 0031`)
+1. Explicitly specified by ID (e.g., `/sw:archive 0031`)
 2. Match age criteria (e.g., `--older-than 90`)
 3. Match pattern criteria (e.g., `--pattern "old-*"`)
 4. Not in last N increments (e.g., `--keep-last 10`)
@@ -135,7 +135,7 @@ This safety feature ensures:
 ### Example 1: Archive Specific Increment
 
 ```bash
-/specweave:archive 0031
+/sw:archive 0031
 ```
 
 **Output**:
@@ -161,13 +161,13 @@ Checking increment 0031-external-tool-status-sync...
    Auto-archived features: 1
    Auto-archived epics: 0
 
-Next: /specweave:restore 0031 (if you need to unarchive)
+Next: /sw:restore 0031 (if you need to unarchive)
 ```
 
 ### Example 2: Archive Old Increments (Keep Last 10)
 
 ```bash
-/specweave:archive --keep-last 10
+/sw:archive --keep-last 10
 ```
 
 **Output**:
@@ -198,7 +198,7 @@ Filtering by status and safety checks...
 ### Example 3: Dry Run (Preview)
 
 ```bash
-/specweave:archive --older-than 90 --dry-run
+/sw:archive --older-than 90 --dry-run
 ```
 
 **Output**:
@@ -217,13 +217,13 @@ Summary:
   Total size: 180 MB
 
 Run without --dry-run to proceed:
-  /specweave:archive --older-than 90
+  /sw:archive --older-than 90
 ```
 
 ### Example 4: Archive by Pattern
 
 ```bash
-/specweave:archive --pattern "auth-|payment-|legacy-"
+/sw:archive --pattern "auth-|payment-|legacy-"
 ```
 
 **Output**:
@@ -255,8 +255,8 @@ Location: .specweave/increments/_archive/0031-external-tool-status-sync/
 
 Options:
   1. Delete from archive first, then retry
-  2. Restore from archive: /specweave:restore 0031
-  3. Resolve duplicates: /specweave:fix-duplicates
+  2. Restore from archive: /sw:restore 0031
+  3. Resolve duplicates: /sw:fix-duplicates
 ```
 
 ### Active Increment Protection
@@ -269,8 +269,8 @@ Skipped:
   • 0033-current-work (status: in-progress)
 
 Recommendation:
-  1. Close increments first: /specweave:done 0032
-  2. Then archive: /specweave:archive 0032
+  1. Close increments first: /sw:done 0032
+  2. Then archive: /sw:archive 0032
 ```
 
 ### External Sync Active
@@ -284,25 +284,25 @@ Skipped:
 
 Recommendation:
   1. Close external issues first
-  2. Then retry: /specweave:archive 0031 0030
+  2. Then retry: /sw:archive 0031 0030
 
 Or force archive (not recommended):
-  /specweave:archive 0031 --force
+  /sw:archive 0031 --force
 ```
 
 ## Related Commands
 
-- `/specweave:restore <increment-id>` - Restore increment from archive
-- `/specweave:done <increment-id>` - Close increment (does NOT archive!)
-- `/specweave:archive-features` - **DEPRECATED**: Now automatic, no longer needed!
-- `/specweave:status` - View archive statistics
+- `/sw:restore <increment-id>` - Restore increment from archive
+- `/sw:done <increment-id>` - Close increment (does NOT archive!)
+- `/sw:archive-features` - **DEPRECATED**: Now automatic, no longer needed!
+- `/sw:status` - View archive statistics
 
 ## Important Notes
 
 ### ⚠️ Manual Only Policy
 
 **Increments are NEVER auto-archived!** This is a deliberate design decision:
-- ✅ `/specweave:done` closes increments but leaves them visible
+- ✅ `/sw:done` closes increments but leaves them visible
 - ✅ You control when increments are archived
 - ✅ Keep ~10-20 recent increments visible for reference
 - ✅ Archive older work when you're ready
@@ -310,12 +310,12 @@ Or force archive (not recommended):
 ### 🔗 Feature Archiving (FULLY AUTOMATIC!)
 
 **Features/epics ARE automatically archived** when all their increments are archived:
-- ✅ `/specweave:archive 0031` → **AUTOMATICALLY** archives FS-031 if all increments archived
+- ✅ `/sw:archive 0031` → **AUTOMATICALLY** archives FS-031 if all increments archived
 - ✅ **AUTOMATICALLY** updates living docs and archives orphaned features
-- ✅ **ONE COMMAND** does everything - no manual `/specweave:archive-features` needed!
+- ✅ **ONE COMMAND** does everything - no manual `/sw:archive-features` needed!
 - ✅ Keeps feature docs in sync with increment archives
 
-**You never need to run `/specweave:archive-features` manually anymore!**
+**You never need to run `/sw:archive-features` manually anymore!**
 
 ### 📦 Archive is Local Only
 
@@ -476,13 +476,13 @@ Default behavior:
 **Recommended Workflow**:
 ```bash
 # 1. Check what would be archived (dry run)
-/specweave:archive --keep-last 10 --dry-run
+/sw:archive --keep-last 10 --dry-run
 
 # 2. Archive old increments (features auto-archived!)
-/specweave:archive --keep-last 10
+/sw:archive --keep-last 10
 
 # 3. Check results
-/specweave:status
+/sw:status
 ```
 
 **That's it!** Features are automatically archived in step 2 - no manual intervention needed!

package/plugins/specweave/commands/{specweave-backlog.md → backlog.md}

@@ -1,12 +1,12 @@
 ---
-name: specweave:backlog
+name: sw:backlog
 description: Move an increment to backlog (planned but not ready to start)
-usage: /specweave:backlog <increment-id> --reason="<reason>"
+usage: /sw:backlog <increment-id> --reason="<reason>"
 ---
 
 # Backlog Increment Command
 
-**Usage**: `/specweave:backlog <increment-id> --reason="<reason>"`
+**Usage**: `/sw:backlog <increment-id> --reason="<reason>"`
 
 ---
 
@@ -33,7 +33,7 @@ Move an increment to backlog when:
    - `backlogReason`: User-provided reason
    - `backlogAt`: Current timestamp
 4. **Displays** confirmation message
-5. **Suggests** next actions (`/specweave:resume` to start work)
+5. **Suggests** next actions (`/sw:resume` to start work)
 
 ---
 
@@ -41,17 +41,17 @@ Move an increment to backlog when:
 
 ### Move to backlog with reason
 ```bash
-/specweave:backlog 0032 --reason="Low priority, focus on 0031 first"
+/sw:backlog 0032 --reason="Low priority, focus on 0031 first"
 
 ✅ Increment 0032 moved to backlog
 📝 Reason: Low priority, focus on 0031 first
 🗂️  No longer counts toward WIP limits
-💡 Start work with: /specweave:resume 0032
+💡 Start work with: /sw:resume 0032
 ```
 
 ### Move to backlog without reason (prompts)
 ```bash
-/specweave:backlog 0032
+/sw:backlog 0032
 
 ❓ Why are you moving this to backlog?
    1. Low priority
@@ -63,7 +63,7 @@ Move an increment to backlog when:
 
 ✅ Increment 0032 moved to backlog
 📝 Reason: Low priority
-💡 Start work with: /specweave:resume 0032
+💡 Start work with: /sw:resume 0032
 ```
 
 ---
@@ -72,7 +72,7 @@ Move an increment to backlog when:
 
 ### Already in Backlog
 ```bash
-/specweave:backlog 0032 --reason="Different reason"
+/sw:backlog 0032 --reason="Different reason"
 
 ⚠️  Increment 0032 is already in backlog
    Previous reason: Low priority
@@ -86,7 +86,7 @@ Update reason? [Y/n]: y
 
 ### Cannot Backlog Completed
 ```bash
-/specweave:backlog 0005
+/sw:backlog 0005
 
 ❌ Cannot move increment 0005 to backlog
    Status: completed
@@ -95,20 +95,20 @@ Update reason? [Y/n]: y
 
 ### Cannot Backlog Paused
 ```bash
-/specweave:backlog 0008
+/sw:backlog 0008
 
 ❌ Cannot move increment 0008 to backlog
    Status: paused
    Paused work should be resumed or abandoned, not moved to backlog
-   Resume it: /specweave:resume 0008
+   Resume it: /sw:resume 0008
 ```
 
 ### Increment Not Found
 ```bash
-/specweave:backlog 9999
+/sw:backlog 9999
 
 ❌ Increment not found: 9999
-💡 Check available increments: /specweave:status
+💡 Check available increments: /sw:status
 ```
 
 ---
@@ -146,10 +146,10 @@ active ──backlog──> backlog
 
 ## Related Commands
 
-- `/specweave:resume <id>` - Move from backlog to active (start work)
-- `/specweave:pause <id>` - Pause active work (different from backlog)
-- `/specweave:status` - Show all increment statuses including backlog
-- `/specweave:abandon <id>` - Abandon increment (permanent)
+- `/sw:resume <id>` - Move from backlog to active (start work)
+- `/sw:pause <id>` - Pause active work (different from backlog)
+- `/sw:status` - Show all increment statuses including backlog
+- `/sw:abandon <id>` - Abandon increment (permanent)
 
 ---
 
@@ -161,7 +161,7 @@ active ──backlog──> backlog
 
 ✅ **Clear reasons** - Helps with prioritization decisions
 
-✅ **Start when ready** - Use `/specweave:resume` to move from backlog to active
+✅ **Start when ready** - Use `/sw:resume` to move from backlog to active
 
 ❌ **Don't confuse with paused** - Backlog = never started, Paused = started but blocked
 
@@ -182,10 +182,10 @@ active ──backlog──> backlog
 
 ## Warning: Large Backlog
 
-If your backlog grows too large (10+ increments), `/specweave:status` will warn:
+If your backlog grows too large (10+ increments), `/sw:status` will warn:
 
 ```bash
-/specweave:status
+/sw:status
 
 🗂️  Backlog (12):
   📦 0032-feature-a [feature] - Low priority
@@ -199,13 +199,13 @@ If your backlog grows too large (10+ increments), `/specweave:status` will warn:
    - Reviewing priorities
 
 💡 Actions:
-   /specweave:resume <id>  # Start work on highest priority
-   /specweave:abandon <id> # Remove obsolete items
+   /sw:resume <id>  # Start work on highest priority
+   /sw:abandon <id> # Remove obsolete items
 ```
 
 ---
 
-**Command**: `/specweave:backlog`
+**Command**: `/sw:backlog`
 **Plugin**: specweave (core)
 **Version**: v0.19.0+
 **Part of**: Backlog Support Feature

package/plugins/specweave/commands/{specweave-check-hooks.md → check-hooks.md}

@@ -1,11 +1,11 @@
 ---
-name: specweave:check-hooks
+name: sw:check-hooks
 description: Comprehensive health check for hooks - detects import errors, runtime failures, performance issues, and provides auto-fix suggestions
 ---
 
 # Check Hook Health
 
-**Command**: `/specweave:check-hooks`
+**Command**: `/sw:check-hooks`
 
 Runs comprehensive health check on all hooks in the project.
 Detects import errors, runtime failures, performance issues, and provides auto-fix suggestions.
@@ -14,22 +14,22 @@ Detects import errors, runtime failures, performance issues, and provides auto-f
 
 ```bash
 # Check all hooks
-/specweave:check-hooks
+/sw:check-hooks
 
 # Check and auto-fix issues
-/specweave:check-hooks --fix
+/sw:check-hooks --fix
 
 # Check only critical hooks
-/specweave:check-hooks --critical
+/sw:check-hooks --critical
 
 # Verbose output with details
-/specweave:check-hooks --verbose
+/sw:check-hooks --verbose
 
 # Check specific hook
-/specweave:check-hooks update-ac-status
+/sw:check-hooks update-ac-status
 
 # Generate markdown report
-/specweave:check-hooks --format markdown --output report.md
+/sw:check-hooks --format markdown --output report.md
 ```
 
 ## Options
@@ -177,10 +177,10 @@ fi
 ## Troubleshooting
 
 ### "Hook execution timeout"
-Increase timeout: `/specweave:check-hooks --timeout 10000`
+Increase timeout: `/sw:check-hooks --timeout 10000`
 
 ### "Cannot find module"
-Run with auto-fix: `/specweave:check-hooks --fix`
+Run with auto-fix: `/sw:check-hooks --fix`
 
 ### "Permission denied"
 Check hook file permissions: `chmod +x plugins/*/hooks/*.sh`