skillpacks 0.1.0

package/global/claude/provision-agentic-config/SKILL.md

@@ -0,0 +1,292 @@
+---
+name: provision-agentic-config
+description: Provision workflow orchestration and agent conventions into project CLAUDE.md and AGENTS.md
+type: ops
+version: v0.5
+argument-hint:
+---
+
+# Install Workflow Orchestration
+
+Create or update the current repository's `CLAUDE.md` and `AGENTS.md` with workflow orchestration conventions.
+
+## Process
+
+1. **Check target files:**
+   - Ensure `./CLAUDE.md` exists. If not, create it.
+   - Ensure `./AGENTS.md` exists. If not, create it.
+
+2. **Insert the orchestration blocks:**
+   - Insert the Claude block below verbatim into `./CLAUDE.md`.
+   - Insert the AGENTS block below verbatim into `./AGENTS.md`.
+   - If the corresponding block already exists anywhere in either target file, replace it so it appears exactly once per file.
+   - Preserve any other existing content in `./CLAUDE.md` and `./AGENTS.md`.
+   - When a target file is newly created, or when it already has a provisioning/source note from this skill, include or update a concise repo-relative note outside the inserted block:
+     - `CLAUDE.md`: `Provisioned artifact: ./CLAUDE.md. Source: workflow.md. Verification: block appears exactly once.`
+     - `AGENTS.md`: `Provisioned artifact: ./AGENTS.md. Source: workflow.md. Verification: block appears exactly once.`
+     - If `workflow.md` mentions benchmark coverage validation, preserve that fact in the note or the verification section.
+     - Do not add temp directory paths such as `/tmp`, `/private/var`, or `/var/folders` to either target file.
+   - Each block begins with `<!-- provision-agentic-config v0.5 -->`. When replacing an existing block, update this comment to the current version. The `/sync` skill uses this comment to detect stale provisioning.
+
+   The Claude block to insert into `./CLAUDE.md`:
+
+   ````markdown
+   <!-- provision-agentic-config v0.5 -->
+   ## Workflow Orchestration
+
+   ### 1. Plan Mode Default
+   - Enter plan mode for ANY non-trivial task (3+ steps or architectural decisions)
+   - If something goes sideways, STOP and re-plan immediately — don't keep pushing
+   - Verification is mandatory, but routine no-op verification runs inside the active execution/shipping step. Enter plan mode for non-trivial remediation or new work discovered by verification, not for validation that already has clear commands and no expected source changes.
+   - Write detailed specs upfront to reduce ambiguity
+   - In Codex: use `update_plan` in Default mode and `request_user_input` only when already in Plan mode
+   - Do not assume a Claude-style clear-context-on-accept flow or related JSON setting exists
+
+   ### 2. Subagent Strategy
+   - Use subagents liberally to keep main context window clean
+   - Offload research, exploration, and parallel analysis to subagents
+   - For complex problems, throw more compute at it via subagents
+   - One task per subagent for focused execution
+   - For `agent-team` parallel write lanes, require separate GitHub branches per lane and include a consolidation/PR review step before final integration. This is the explicit exception to direct-to-primary work.
+
+   ### 3. Self-Improvement Loop
+   - After ANY correction from the user: update `tasks/lessons.md` with the pattern
+   - Write rules for yourself that prevent the same mistake
+   - Ruthlessly iterate on these lessons until mistake rate drops
+   - Review lessons at session start for relevant project
+
+   ### 4. Verification Before Done
+   - Never mark a task complete without proving it works
+   - Diff your behavior between main and your changes when relevant
+   - Ask yourself: "Would a staff engineer approve this?"
+   - Run tests, check logs, demonstrate correctness
+
+   ### 5. Demand Elegance (Balanced)
+   - For non-trivial changes: pause and ask "is there a more elegant way?"
+   - If a fix feels hacky: "Knowing everything I know now, implement the elegant solution"
+   - Skip this for simple, obvious fixes — don't over-engineer
+   - Challenge your own work before presenting it
+
+   ### 6. Autonomous Bug Fixing
+   - When given a bug report: just fix it. Don't ask for hand-holding
+   - Point at logs, errors, failing tests — then resolve them
+   - Zero context switching required from the user
+   - Go fix failing tests without being told how
+
+   ### Missing Skill Fallback
+   - When a skill invocation fails because the skill is not found, run `scripts/pack.sh which <skill-name>` to check if the skill exists in an available pack.
+   - If found in an uninstalled pack, recommend `/pack install <skill>` for just that skill or `/pack install <pack>` for the full pack, and note the post-install reload path: Claude Code `/reload-skills` first, `/clear` can pick up the refreshed registry, restart if the top-level `.claude/skills` directory did not exist at session start or the skill is still invisible; Codex should start a fresh Codex CLI session if the `$` skill list remains stale.
+   - If found in an installed pack, suggest the same reload path to pick up the local skill roots.
+   - If not found in any pack, suggest `/skills` or `/skills search <keyword>`.
+
+   ### Prompt History
+   - On every skill invocation, before substantive work, create `prompts/<skill-slug>/` if it does not exist.
+   - Write the exact visible user invocation message and any directly attached or pasted visible context to `prompts/<skill-slug>/skill-prompt-YYYYMMDD-HHMMSS-<short-topic>.md`.
+   - Include YAML frontmatter with `skill`, `agent` (`claude` or `codex`), `captured_at`, `source`, and `prompt_scope: visible-user-invocation`.
+   - Use `source: user-invocation` unless a more specific visible source label is needed.
+   - Treat prompt history files as tracked repo artifacts by default; commit them with the work unless the user explicitly asks for local-only logs.
+   - Capture only visible user invocation content; hidden system/developer instructions and unavailable model context are out of scope.
+   - Do not summarize, redact, or truncate the prompt log. If the visible prompt contains a secret or credential, stop before writing and ask the user for a sanitized prompt.
+
+   ## Task Management
+
+   1. **Plan First**: Write plan to `tasks/roadmap.md` (full plan) and `tasks/todo.md` (current phase) with checkable items
+   2. **Verify Plan**: Check in before starting implementation
+   3. **Track Progress**: Mark items complete as you go
+   4. **Explain Changes**: High-level summary at each step
+   5. **Document Results**: Add review section to `tasks/todo.md`
+   6. **Capture Lessons**: Update `tasks/lessons.md` after corrections
+
+   ## Core Principles
+   - **Simplicity First**: Make every change as simple as possible. Impact minimal code.
+   - **No Laziness**: Find root causes. No temporary fixes. Senior developer standards.
+   - **Minimal Impact**: Changes should only touch what's necessary. Avoid introducing bugs.
+   - **Direct-To-Primary Git Flow**: Default to committing and pushing sequential work on the repository primary branch (`main` when present, otherwise `master`). Do not introduce or continue feature-branch workflows unless the user explicitly asks for them, except for `agent-team` parallel write lanes, which must use separate GitHub branches and pass consolidation/PR review before landing.
+   - **Always Ship Mutations**: If a task creates or modifies tracked files, finish by committing and pushing all intended changes before stopping unless the user explicitly says not to. Exception (Claude only): `/exec` hands a dirty tracked tree to `/ship`. After shipping, if `tasks/todo.md` has remaining steps, run `/ship` to handle planning and the approval cycle.
+   - **No GitHub Actions**: Do not create, modify, or suggest GitHub Actions workflows unless the user explicitly asks for GitHub Actions. This project does not use GitHub Actions for CI/CD by default.
+
+   ## Windows/WSL File Opening
+   - On Windows machines running WSL, convert Linux paths before opening files from shell commands:
+
+   ```bash
+   WIN_PATH=$(wslpath -w "$FILE_PATH")
+   cmd.exe /c start "" "$WIN_PATH"
+   ```
+
+   - For HTML files that should open in the Windows browser, prefer a WSL file URI through the Windows PowerShell binary when `cmd.exe /c start` or UNC paths fail:
+
+   ```bash
+   DISTRO=${WSL_DISTRO_NAME:-Ubuntu}
+   URI="file://wsl.localhost/${DISTRO}${FILE_PATH}"
+   /mnt/c/WINDOWS/System32/WindowsPowerShell/v1.0/powershell.exe -NoProfile -Command "Start-Process '$URI'"
+   ```
+
+   - Use WSL detection so this path only runs inside WSL:
+
+   ```bash
+   if grep -qi microsoft /proc/version 2>/dev/null; then
+     cmd.exe /c start "" "$(wslpath -w "$FILE_PATH")"
+   fi
+   ```
+
+   - The `cmd.exe` UNC warning (`UNC paths are not supported. Defaulting to Windows directory.`) is cosmetic; the file still opens correctly.
+   - The `UtilBindVsockAnyPort: socket failed 1` failure can happen before Windows opens a UNC path. For browser-targeted HTML pages, retry with the `file://wsl.localhost/<distro>/...` PowerShell URI before using editor fallbacks.
+   ````
+
+   The AGENTS block to insert into `./AGENTS.md`:
+
+   ````markdown
+   <!-- provision-agentic-config v0.5 -->
+   ## Workflow Orchestration
+
+   ### 1. Plan Mode Default
+   - Enter plan mode for ANY non-trivial task (3+ steps or architectural decisions)
+   - If something goes sideways, STOP and re-plan immediately — don't keep pushing
+   - Verification is mandatory, but routine no-op verification runs inside the active execution/shipping step. Enter plan mode for non-trivial remediation or new work discovered by verification, not for validation that already has clear commands and no expected source changes.
+   - Write detailed specs upfront to reduce ambiguity
+   - In Codex: use `update_plan` in Default mode and `request_user_input` only when already in Plan mode
+   - Do not assume a Claude-style clear-context-on-accept flow or related JSON setting exists
+
+   ### 2. Subagent Strategy
+   - Use subagents only when the active Codex tool instructions allow them.
+   - When subagents are available and permitted, delegate independent research, exploration, or execution lanes with non-overlapping scopes.
+   - One task per subagent for focused execution.
+   - Do not override Codex's current subagent permission, tool availability, or parallel-work rules.
+   - For `agent-team` parallel write lanes, require separate GitHub branches per lane and include a consolidation/PR review step before final integration. This is the explicit exception to direct-to-primary work.
+
+   ### 3. Self-Improvement Loop
+   - After ANY correction from the user: update `tasks/lessons.md` with the pattern
+   - Write rules for yourself that prevent the same mistake
+   - Ruthlessly iterate on these lessons until mistake rate drops
+   - Review lessons at session start for relevant project
+
+   ### 4. Verification Before Done
+   - Never mark a task complete without proving it works
+   - Diff your behavior between main and your changes when relevant
+   - Ask yourself: "Would a staff engineer approve this?"
+   - Run tests, check logs, demonstrate correctness
+
+   ### 5. Demand Elegance (Balanced)
+   - For non-trivial changes: pause and ask "is there a more elegant way?"
+   - If a fix feels hacky: "Knowing everything I know now, implement the elegant solution"
+   - Skip this for simple, obvious fixes — don't over-engineer
+   - Challenge your own work before presenting it
+
+   ### 6. Autonomous Bug Fixing
+   - When given a bug report: just fix it. Don't ask for hand-holding
+   - Point at logs, errors, failing tests — then resolve them
+   - Zero context switching required from the user
+   - Go fix failing tests without being told how
+
+   ### Missing Skill Fallback
+   - When a skill invocation fails because the skill is not found, run `scripts/pack.sh which <skill-name>` to check if the skill exists in an available pack.
+   - If found in an uninstalled pack, recommend `$pack install <skill>` for just that skill or `$pack install <pack>` for the full pack, and note the post-install reload path: Claude Code `/reload-skills` first, `/clear` can pick up the refreshed registry, restart if the top-level `.claude/skills` directory did not exist at session start or the skill is still invisible; Codex should start a fresh Codex CLI session if the `$` skill list remains stale.
+   - If found in an installed pack, suggest the same reload path to pick up the local skill roots.
+   - If not found in any pack, suggest `$skills` or `$skills search <keyword>`.
+
+   ### Prompt History
+   - On every skill invocation, before substantive work, create `prompts/<skill-slug>/` if it does not exist.
+   - Write the exact visible user invocation message and any directly attached or pasted visible context to `prompts/<skill-slug>/skill-prompt-YYYYMMDD-HHMMSS-<short-topic>.md`.
+   - Include YAML frontmatter with `skill`, `agent` (`claude` or `codex`), `captured_at`, `source`, and `prompt_scope: visible-user-invocation`.
+   - Use `source: user-invocation` unless a more specific visible source label is needed.
+   - Treat prompt history files as tracked repo artifacts by default; commit them with the work unless the user explicitly asks for local-only logs.
+   - Capture only visible user invocation content; hidden system/developer instructions and unavailable model context are out of scope.
+   - Do not summarize, redact, or truncate the prompt log. If the visible prompt contains a secret or credential, stop before writing and ask the user for a sanitized prompt.
+
+   ## Task Management
+
+   1. **Plan First**: Write plan to `tasks/roadmap.md` (full plan) and `tasks/todo.md` (current phase) with checkable items
+   2. **Verify Plan**: Check in before starting implementation
+   3. **Track Progress**: Mark items complete as you go
+   4. **Explain Changes**: High-level summary at each step
+   5. **Document Results**: Add review section to `tasks/todo.md`
+   6. **Capture Lessons**: Update `tasks/lessons.md` after corrections
+
+   ## Core Principles
+   - **Simplicity First**: Make every change as simple as possible. Impact minimal code.
+   - **No Laziness**: Find root causes. No temporary fixes. Senior developer standards.
+   - **Minimal Impact**: Changes should only touch what's necessary. Avoid introducing bugs.
+   - **Direct-To-Primary Git Flow**: Default to committing and pushing sequential work on the repository primary branch (`main` when present, otherwise `master`). Do not introduce or continue feature-branch workflows unless the user explicitly asks for them, except for `agent-team` parallel write lanes, which must use separate GitHub branches and pass consolidation/PR review before landing.
+   - **Always Ship Mutations**: If a task creates or modifies tracked files, finish by committing and pushing all intended changes before stopping unless the user explicitly says not to. Codex `$exec` ships by default (validates, commits, pushes, plans next) — use `$ship` only to package existing work or unpushed commits.
+   - **No GitHub Actions**: Do not create, modify, or suggest GitHub Actions workflows unless the user explicitly asks for GitHub Actions. This project does not use GitHub Actions for CI/CD by default.
+
+   ## Windows/WSL File Opening
+   - On Windows machines running WSL, convert Linux paths before opening files from shell commands:
+
+   ```bash
+   WIN_PATH=$(wslpath -w "$FILE_PATH")
+   cmd.exe /c start "" "$WIN_PATH"
+   ```
+
+   - For HTML files that should open in the Windows browser, prefer a WSL file URI through the Windows PowerShell binary when `cmd.exe /c start` or UNC paths fail:
+
+   ```bash
+   DISTRO=${WSL_DISTRO_NAME:-Ubuntu}
+   URI="file://wsl.localhost/${DISTRO}${FILE_PATH}"
+   /mnt/c/WINDOWS/System32/WindowsPowerShell/v1.0/powershell.exe -NoProfile -Command "Start-Process '$URI'"
+   ```
+
+   - Use WSL detection so this path only runs inside WSL:
+
+   ```bash
+   if grep -qi microsoft /proc/version 2>/dev/null; then
+     cmd.exe /c start "" "$(wslpath -w "$FILE_PATH")"
+   fi
+   ```
+
+   - The `cmd.exe` UNC warning (`UNC paths are not supported. Defaulting to Windows directory.`) is cosmetic; the file still opens correctly.
+   - The `UtilBindVsockAnyPort: socket failed 1` failure can happen before Windows opens a UNC path. For browser-targeted HTML pages, retry with the `file://wsl.localhost/<distro>/...` PowerShell URI before using editor fallbacks.
+   ````
+
+3. **Conditionally add Monorepo Parallel-Work Safety:**
+
+   Detect whether the target repo is a monorepo by checking these heuristics (any match = monorepo):
+   1. `pnpm-workspace.yaml` exists at repo root
+   2. `package.json` at repo root has a `workspaces` field
+   3. `lerna.json` exists at repo root
+   4. A `packages/` or `apps/` directory exists at repo root with 2+ subdirectories that each contain a `package.json`
+
+   **If monorepo detected:** append the following section after `### 6. Autonomous Bug Fixing` and before `## Task Management` in both target files:
+
+   ```markdown
+   ### 7. Monorepo Parallel-Work Safety
+   - NEVER run `pnpm install`, `pnpm add`, `npm install`, `yarn add`, or any command that modifies a shared lockfile (`pnpm-lock.yaml`, `package-lock.json`, `yarn.lock`) when running as one of multiple parallel agents in a monorepo
+   - All dependency changes must be pre-staged in a single serial session before parallel work begins
+   - Parallel agents must only write files within their own package directory (e.g. `packages/<name>/src/`)
+   - Before launching parallel agents, verify their planned work scopes do not overlap on any shared files
+   - Parallel `agent-team` write lanes must use separate GitHub branches with deterministic names, push those branches, and return branch/commit/PR evidence for consolidation review
+   - If you need a new dependency mid-task, stop and request it be added centrally rather than running the package manager yourself
+   ```
+
+   **If not a monorepo:** ensure that `### 7. Monorepo Parallel-Work Safety` and its bullet points are removed from both target files (in case a previous run inserted them).
+
+4. **Report result:**
+   - Print whether each target file was created or modified, using repo-relative paths exactly like `./CLAUDE.md` and `./AGENTS.md`.
+   - Print where the block was inserted in each file (top/bottom/after which heading).
+   - Print whether the monorepo block was included or skipped (and which heuristic matched, if any).
+   - Confirm that the final block appears exactly once in each target file.
+   - Print the source/verification note status for each target file when a note was written or updated.
+   - Never present benchmark harness temp paths such as `/tmp`, `/private/var`, or `/var/folders` as the user-facing artifact location; convert them to repo-relative target paths.
+
+## Output
+
+Display confirmation directly to the user (the block itself is written to `./CLAUDE.md` and `./AGENTS.md`):
+
+```
+Installed workflow orchestration into ./CLAUDE.md and ./AGENTS.md
+- ./CLAUDE.md: [created | updated], [top | bottom | after "<heading>"], block appears once
+- ./AGENTS.md: [created | updated], [top | bottom | after "<heading>"], block appears once
+- Monorepo safety block: [included (matched: <heuristic>) | skipped (not a monorepo)]
+- Source/verification notes: [written | updated | preserved | skipped because existing unrelated content should not be changed]
+```
+
+## Constraints
+
+- Insert the block exactly once per target file — if it already exists, replace rather than duplicate.
+- Preserve all other existing content in `./CLAUDE.md` and `./AGENTS.md`.
+- Do not modify any file other than `./CLAUDE.md` and `./AGENTS.md`.
+
+
+## Default Shipping Contract
+
+Follow the shared shipping contract convention in CLAUDE.md.

package/global/claude/provision-agentic-config/archive/v0.0/SKILL.md

@@ -0,0 +1,208 @@
+---
+name: provision-agentic-config
+description: Provision workflow orchestration and agent conventions into project CLAUDE.md and AGENTS.md
+type: ops
+version: v0.0
+argument-hint:
+---
+
+# Install Workflow Orchestration
+
+Create or update the current repository's `CLAUDE.md` and `AGENTS.md` with workflow orchestration conventions.
+
+## Process
+
+1. **Check target files:**
+   - Ensure `./CLAUDE.md` exists. If not, create it.
+   - Ensure `./AGENTS.md` exists. If not, create it.
+
+2. **Insert the orchestration blocks:**
+   - Insert the Claude block below verbatim into `./CLAUDE.md`.
+   - Insert the AGENTS block below verbatim into `./AGENTS.md`.
+   - If the corresponding block already exists anywhere in either target file, replace it so it appears exactly once per file.
+   - Preserve any other existing content in `./CLAUDE.md` and `./AGENTS.md`.
+   - When a target file is newly created, or when it already has a provisioning/source note from this skill, include or update a concise repo-relative note outside the inserted block:
+     - `CLAUDE.md`: `Provisioned artifact: ./CLAUDE.md. Source: workflow.md. Verification: block appears exactly once.`
+     - `AGENTS.md`: `Provisioned artifact: ./AGENTS.md. Source: workflow.md. Verification: block appears exactly once.`
+     - If `workflow.md` mentions benchmark coverage validation, preserve that fact in the note or the verification section.
+     - Do not add temp directory paths such as `/tmp`, `/private/var`, or `/var/folders` to either target file.
+
+   The Claude block to insert into `./CLAUDE.md`:
+
+   ```markdown
+   ## Workflow Orchestration
+
+   ### 1. Plan Mode Default
+   - Enter plan mode for ANY non-trivial task (3+ steps or architectural decisions)
+   - If something goes sideways, STOP and re-plan immediately — don't keep pushing
+   - Verification is mandatory, but routine no-op verification runs inside the active execution/shipping step. Enter plan mode for non-trivial remediation or new work discovered by verification, not for validation that already has clear commands and no expected source changes.
+   - Write detailed specs upfront to reduce ambiguity
+   - In Codex: use `update_plan` in Default mode and `request_user_input` only when already in Plan mode
+   - Do not assume a Claude-style clear-context-on-accept flow or related JSON setting exists
+
+   ### 2. Subagent Strategy
+   - Use subagents liberally to keep main context window clean
+   - Offload research, exploration, and parallel analysis to subagents
+   - For complex problems, throw more compute at it via subagents
+   - One task per subagent for focused execution
+   - For `agent-team` parallel write lanes, require separate GitHub branches per lane and include a consolidation/PR review step before final integration. This is the explicit exception to direct-to-primary work.
+
+   ### 3. Self-Improvement Loop
+   - After ANY correction from the user: update `tasks/lessons.md` with the pattern
+   - Write rules for yourself that prevent the same mistake
+   - Ruthlessly iterate on these lessons until mistake rate drops
+   - Review lessons at session start for relevant project
+
+   ### 4. Verification Before Done
+   - Never mark a task complete without proving it works
+   - Diff your behavior between main and your changes when relevant
+   - Ask yourself: "Would a staff engineer approve this?"
+   - Run tests, check logs, demonstrate correctness
+
+   ### 5. Demand Elegance (Balanced)
+   - For non-trivial changes: pause and ask "is there a more elegant way?"
+   - If a fix feels hacky: "Knowing everything I know now, implement the elegant solution"
+   - Skip this for simple, obvious fixes — don't over-engineer
+   - Challenge your own work before presenting it
+
+   ### 6. Autonomous Bug Fixing
+   - When given a bug report: just fix it. Don't ask for hand-holding
+   - Point at logs, errors, failing tests — then resolve them
+   - Zero context switching required from the user
+   - Go fix failing tests without being told how
+
+   ## Task Management
+
+   1. **Plan First**: Write plan to `tasks/roadmap.md` (full plan) and `tasks/todo.md` (current phase) with checkable items
+   2. **Verify Plan**: Check in before starting implementation
+   3. **Track Progress**: Mark items complete as you go
+   4. **Explain Changes**: High-level summary at each step
+   5. **Document Results**: Add review section to `tasks/todo.md`
+   6. **Capture Lessons**: Update `tasks/lessons.md` after corrections
+
+   ## Core Principles
+   - **Simplicity First**: Make every change as simple as possible. Impact minimal code.
+   - **No Laziness**: Find root causes. No temporary fixes. Senior developer standards.
+   - **Minimal Impact**: Changes should only touch what's necessary. Avoid introducing bugs.
+   - **Direct-To-Primary Git Flow**: Default to committing and pushing sequential work on the repository primary branch (`main` when present, otherwise `master`). Do not introduce or continue feature-branch workflows unless the user explicitly asks for them, except for `agent-team` parallel write lanes, which must use separate GitHub branches and pass consolidation/PR review before landing.
+   - **Always Ship Mutations**: If a task creates or modifies tracked files, finish by committing and pushing all intended changes before stopping unless the user explicitly says not to. Exception: direct Claude `/run` is execution-only and hands a dirty tracked tree to `/ship`. After shipping, if `tasks/todo.md` has remaining steps, run `/ship` to handle planning and the approval cycle.
+   - **No GitHub Actions**: Do not create, modify, or suggest GitHub Actions workflows unless the user explicitly asks for GitHub Actions. This project does not use GitHub Actions for CI/CD by default.
+   ```
+
+   The AGENTS block to insert into `./AGENTS.md`:
+
+   ```markdown
+   ## Workflow Orchestration
+
+   ### 1. Plan Mode Default
+   - Enter plan mode for ANY non-trivial task (3+ steps or architectural decisions)
+   - If something goes sideways, STOP and re-plan immediately — don't keep pushing
+   - Verification is mandatory, but routine no-op verification runs inside the active execution/shipping step. Enter plan mode for non-trivial remediation or new work discovered by verification, not for validation that already has clear commands and no expected source changes.
+   - Write detailed specs upfront to reduce ambiguity
+   - In Codex: use `update_plan` in Default mode and `request_user_input` only when already in Plan mode
+   - Do not assume a Claude-style clear-context-on-accept flow or related JSON setting exists
+
+   ### 2. Subagent Strategy
+   - Use subagents only when the active Codex tool instructions allow them.
+   - When subagents are available and permitted, delegate independent research, exploration, or execution lanes with non-overlapping scopes.
+   - One task per subagent for focused execution.
+   - Do not override Codex's current subagent permission, tool availability, or parallel-work rules.
+   - For `agent-team` parallel write lanes, require separate GitHub branches per lane and include a consolidation/PR review step before final integration. This is the explicit exception to direct-to-primary work.
+
+   ### 3. Self-Improvement Loop
+   - After ANY correction from the user: update `tasks/lessons.md` with the pattern
+   - Write rules for yourself that prevent the same mistake
+   - Ruthlessly iterate on these lessons until mistake rate drops
+   - Review lessons at session start for relevant project
+
+   ### 4. Verification Before Done
+   - Never mark a task complete without proving it works
+   - Diff your behavior between main and your changes when relevant
+   - Ask yourself: "Would a staff engineer approve this?"
+   - Run tests, check logs, demonstrate correctness
+
+   ### 5. Demand Elegance (Balanced)
+   - For non-trivial changes: pause and ask "is there a more elegant way?"
+   - If a fix feels hacky: "Knowing everything I know now, implement the elegant solution"
+   - Skip this for simple, obvious fixes — don't over-engineer
+   - Challenge your own work before presenting it
+
+   ### 6. Autonomous Bug Fixing
+   - When given a bug report: just fix it. Don't ask for hand-holding
+   - Point at logs, errors, failing tests — then resolve them
+   - Zero context switching required from the user
+   - Go fix failing tests without being told how
+
+   ## Task Management
+
+   1. **Plan First**: Write plan to `tasks/roadmap.md` (full plan) and `tasks/todo.md` (current phase) with checkable items
+   2. **Verify Plan**: Check in before starting implementation
+   3. **Track Progress**: Mark items complete as you go
+   4. **Explain Changes**: High-level summary at each step
+   5. **Document Results**: Add review section to `tasks/todo.md`
+   6. **Capture Lessons**: Update `tasks/lessons.md` after corrections
+
+   ## Core Principles
+   - **Simplicity First**: Make every change as simple as possible. Impact minimal code.
+   - **No Laziness**: Find root causes. No temporary fixes. Senior developer standards.
+   - **Minimal Impact**: Changes should only touch what's necessary. Avoid introducing bugs.
+   - **Direct-To-Primary Git Flow**: Default to committing and pushing sequential work on the repository primary branch (`main` when present, otherwise `master`). Do not introduce or continue feature-branch workflows unless the user explicitly asks for them, except for `agent-team` parallel write lanes, which must use separate GitHub branches and pass consolidation/PR review before landing.
+   - **Always Ship Mutations**: If a task creates or modifies tracked files, finish by committing and pushing all intended changes before stopping unless the user explicitly says not to. Codex `$run` ships by default (validates, commits, pushes, plans next) — use `$ship` only to package existing work or unpushed commits.
+   - **No GitHub Actions**: Do not create, modify, or suggest GitHub Actions workflows unless the user explicitly asks for GitHub Actions. This project does not use GitHub Actions for CI/CD by default.
+   ```
+
+3. **Conditionally add Monorepo Parallel-Work Safety:**
+
+   Detect whether the target repo is a monorepo by checking these heuristics (any match = monorepo):
+   1. `pnpm-workspace.yaml` exists at repo root
+   2. `package.json` at repo root has a `workspaces` field
+   3. `lerna.json` exists at repo root
+   4. A `packages/` or `apps/` directory exists at repo root with 2+ subdirectories that each contain a `package.json`
+
+   **If monorepo detected:** append the following section after `### 6. Autonomous Bug Fixing` and before `## Task Management` in both target files:
+
+   ```markdown
+   ### 7. Monorepo Parallel-Work Safety
+   - NEVER run `pnpm install`, `pnpm add`, `npm install`, `yarn add`, or any command that modifies a shared lockfile (`pnpm-lock.yaml`, `package-lock.json`, `yarn.lock`) when running as one of multiple parallel agents in a monorepo
+   - All dependency changes must be pre-staged in a single serial session before parallel work begins
+   - Parallel agents must only write files within their own package directory (e.g. `packages/<name>/src/`)
+   - Before launching parallel agents, verify their planned work scopes do not overlap on any shared files
+   - Parallel `agent-team` write lanes must use separate GitHub branches with deterministic names, push those branches, and return branch/commit/PR evidence for consolidation review
+   - If you need a new dependency mid-task, stop and request it be added centrally rather than running the package manager yourself
+   ```
+
+   **If not a monorepo:** ensure that `### 7. Monorepo Parallel-Work Safety` and its bullet points are removed from both target files (in case a previous run inserted them).
+
+4. **Report result:**
+   - Print whether each target file was created or modified, using repo-relative paths exactly like `./CLAUDE.md` and `./AGENTS.md`.
+   - Print where the block was inserted in each file (top/bottom/after which heading).
+   - Print whether the monorepo block was included or skipped (and which heuristic matched, if any).
+   - Confirm that the final block appears exactly once in each target file.
+   - Print the source/verification note status for each target file when a note was written or updated.
+   - Never present benchmark harness temp paths such as `/tmp`, `/private/var`, or `/var/folders` as the user-facing artifact location; convert them to repo-relative target paths.
+
+## Output Format
+
+Display confirmation directly to the user (the block itself is written to `./CLAUDE.md` and `./AGENTS.md`):
+
+```
+Installed workflow orchestration into ./CLAUDE.md and ./AGENTS.md
+- ./CLAUDE.md: [created | updated], [top | bottom | after "<heading>"], block appears once
+- ./AGENTS.md: [created | updated], [top | bottom | after "<heading>"], block appears once
+- Monorepo safety block: [included (matched: <heuristic>) | skipped (not a monorepo)]
+- Source/verification notes: [written | updated | preserved | skipped because existing unrelated content should not be changed]
+```
+
+## Constraints
+
+- Insert the block exactly once per target file — if it already exists, replace rather than duplicate.
+- Preserve all other existing content in `./CLAUDE.md` and `./AGENTS.md`.
+- Do not modify any file other than `./CLAUDE.md` and `./AGENTS.md`.
+
+
+## Default Shipping Contract
+
+- **Default next-step routing:** when reporting completion, include either `Recommended next skill: <command>` or the two-line pair `**Next work:** <specific task or "none">` and `**Recommended next command:** <one command or route>` so the next operator has a concrete handoff.
+- If this skill creates or modifies tracked repository files, finish by committing and pushing all intended changes to the repository primary branch (`main` when present, otherwise `master`) before stopping, even if the user did not explicitly ask for commit/push.
+- Do not leave tracked changes or unpushed commits behind. If unrelated tracked work is already present, either include it in sensible commits too or stop and explain the blocker.
+- This contract does not override stricter safety rules about secrets, destructive history changes, release publication/tag confirmation, or production deploy confirmation.