skilldrop-cli 1.6.0 → 1.8.0

package/packs/interior-designer/skills/furniture-layout/evals/files/8/email_from_practice_manager.txt

@@ -0,0 +1,44 @@
+From: Joanne Pellow <practice.manager@hollinlane-dental.example>
+To: studio@pinfold-interiors.example
+Subject: Waiting room re-arrange - measurements and the access audit bits
+
+Hi,
+
+As promised, the measurements for the waiting room. I measured it myself with a laser
+so they should be right to the centimetre.
+
+The room is 6.8 m along the front (street) wall, left to right as you come in, and
+5.4 m from the front wall to the back wall. Flat floor, no steps, no columns.
+
+Doors:
+- Entrance from the street is in the front wall. The opening runs from 2.8 m to 3.8 m
+  measured from the left-hand wall (so it's a 1 m door). It opens into the waiting room,
+  hinged on the left.
+- Corridor door to the surgeries is in the back wall, from 0.3 m to 1.2 m from the
+  left-hand wall. It opens away from us into the corridor.
+- The accessible WC door is in the right-hand wall, from 0.7 m to 1.6 m measured from
+  the front wall. It opens OUT into the waiting room, hinged at the front end.
+
+Window: left-hand wall, 1.5 m to 3.7 m from the front wall, sill at 850 mm, so chairs
+can go under it.
+
+Reception counter: built in against the back wall, from 4.0 m to 5.8 m from the
+left-hand wall, 800 mm deep. The lowered (wheelchair height) part is the left-hand
+900 mm as you face the counter. That counter isn't moving.
+
+From the access audit we had in September, we have to:
+1. keep a clear 1500 x 1500 turning space directly in front of the accessible WC door,
+2. keep a clear 1500 x 1500 space in front of the lowered part of the counter,
+3. keep clear routes at least 1200 wide from the entrance to the counter, to the WC
+   and to the corridor door,
+4. have one wheelchair waiting space (900 x 1400) beside the other seats, not in a
+   walkway,
+5. keep both door swings clear.
+
+We're keeping all our own furniture (list attached) and not buying anything new this
+year. We'd like to seat as many people as that list allows.
+
+Can you send me a plan with the sizes on so I can show the partners?
+
+Thanks,
+Joanne

package/packs/interior-designer/skills/furniture-layout/evals/files/8/furniture_we_are_keeping.csv

@@ -0,0 +1,10 @@
+Item,Qty,Width (cm),Depth (cm),Notes
+Waiting chair with arms,8,58,60,"grey vinyl, stackable"
+Two-seat sofa,1,140,75,
+Bariatric chair,1,76,70,"wider seat, keep near the front if poss"
+Coffee table,1,100,50,magazines
+Children's play table,1,60,60,bead maze on top
+Toy box,1,60,40,
+Leaflet bookcase,1,90,30,"NHS leaflets, can go on any wall"
+Water cooler,1,33,33,needs a socket - sockets on every wall
+Plant in pot,1,45,45,"round pot, 45 across"

package/packs/interior-designer/skills/furniture-layout/evals/files/9/reading_room_schedule.csv

@@ -0,0 +1,15 @@
+Ref,Description,Size E-W (mm),Size N-S (mm),X from west wall (mm),Y from south wall (mm),Fixed?,Supplier,Notes
+S1,"Wall shelving range, single-sided (window bay south side)",2400,350,0,1650,Yes,,bolted to floor and wall
+S2,"Wall shelving range, single-sided (window bay north side)",2400,350,0,3300,Yes,,bolted to floor and wall
+T5,"Accessible study table, height adjustable",800,1200,0,2050,Yes,Oakcroft Library Supply,on the floor box (power/data) - can't move
+RT1,"Reading table, 6 seats",1800,900,800,4900,No,Oakcroft Library Supply,3 chairs each long side
+RT2,"Reading table, 6 seats",1800,900,5600,900,No,Oakcroft Library Supply,3 chairs each long side
+RT3,"Reading table, 6 seats",1800,900,7900,1200,No,Oakcroft Library Supply,3 chairs each long side
+R3,"Mobile shelving range, double-sided",600,2800,6000,2700,No,Brackenfold Shelving,non-fiction 000-399
+R4,"Mobile shelving range, double-sided",600,2800,7400,2700,No,Brackenfold Shelving,non-fiction 400-799
+R5,"Wall shelving range, single-sided",350,2800,9650,2700,No,Brackenfold Shelving,non-fiction 800-999
+LC1,Lounge armchair,800,800,400,300,No,,
+LC2,Lounge armchair,800,800,2100,300,No,,
+LT1,Low table,600,600,1350,400,No,,
+DS1,Newspaper display stand,1200,450,6000,6300,No,Brackenfold Shelving,
+TR1,Returns trolley,900,500,3950,200,No,,on castors

package/packs/interior-designer/skills/furniture-layout/evals/files/9/room_notes.txt

@@ -0,0 +1,23 @@
+Reading room - Ashby Moor Library - notes for the furniture re-plan
+(Rosalind Achebe, branch librarian, Nov 2026)
+
+Room: 10.0 m west to east, 7.2 m south to north, rectangular, no columns.
+X and Y in the schedule are to the south-west corner of each piece, from the west
+wall and the south wall. Sizes are as the piece sits in the room.
+
+Main door: south wall, opening from 4000 to 4900 mm from the west wall. Opens into the
+room, hinged at the west side.
+Fire exit: east wall, opening from 5800 to 6700 mm from the south wall. Opens outward.
+Window bay: west wall between S1 and S2 (2000 to 3300 mm from the south wall).
+
+S1 and S2 are bolted to the floor and wall and are staying. T5 stays where it is - the
+only floor box with power and data for it is under it.
+
+Our standards (from the county's library design guide):
+- main routes (main door to the fire exit, and main door to T5) at least 1200 clear
+- at least 1000 between shelving ranges
+- 900 clear behind the chairs on the long sides of a reading table, to pull the chair
+  out (measure from the table edge)
+- nothing in the swing of the main door
+- a 1500 x 1500 turning space for the wheelchair user at T5, in front of T5 in the
+  window bay, so they aren't sitting out in the walkway

package/packs/interior-designer/skills/furniture-layout/examples/king-bed-bedroom.md

@@ -0,0 +1,121 @@
+# Worked example: a king bed that "fits" by area
+
+Input → output oracle for `furniture-layout`. The room passes an area check easily: 11.9 m²
+of floor for 5.2 m² of furniture. It fails twice on geometry before it passes. The first draft
+puts the desk in the door's swing. The second leaves a 0.81 m diagonal between the desk and
+the bed, under the 0.9 m walkway, so the wardrobe can't be reached. The answer keeps the king
+bed and changes the one piece that can give: the desk.
+
+## Input
+
+> Lay out our bedroom: 3.6 m wide × 3.3 m deep, door at the right end of the south wall
+> opening in, window centred on the north wall with a 0.9 m sill. Furniture: a king bed
+> (1.8 × 2.0 m), two nightstands, a 1.2 m wardrobe with hinged doors, and a small desk with
+> a chair.
+
+## The zoning
+
+- The bed's head goes on the north wall, under the window: it is the only wall long enough to
+  give the bed 0.6 m on both sides.
+- The wardrobe takes the west wall beside the bed, so its doors open into the bed's own side
+  clearance, not into the route.
+- The desk takes the south-west corner, away from the door's swing.
+- The route runs from the door along the foot of the bed to both bed sides and the wardrobe.
+
+## What the checker caught
+
+**Draft 1** had the bed centred, the wardrobe on the west wall by the door, and the desk on the
+east wall by the door:
+
+```
+FAIL Desk is in the swing of Door: the door can't open fully
+FAIL nothing 0.90 m wide clears the way in at Door
+```
+
+**Draft 2** moved the bed 0.3 m east and the desk into the south-west corner, still at the
+standard small-desk size of 1.0 × 0.5 m:
+
+```
+FAIL no clear 0.90 m route from the entrance reaches Wardrobe (its front side)
+```
+
+The desk's corner at (1.0, 0.5) and the bed's foot corner at (1.2, 1.3) leave a diagonal of
+0.81 m. That's enough to squeeze past, but not the 0.9 m walkway. A 0.9 × 0.45 m desk
+opens the gap to 0.94 m.
+
+## The layout that passes
+
+`layout.json` (excerpt):
+
+```json
+{
+  "title": "Bedroom, 3.6 × 3.3 m: king bed, wardrobe and desk",
+  "units": "m", "size": [3.6, 3.3],
+  "doors": [{"name": "Door", "at": [3.1, 0], "width": 0.8, "hinge": "left", "swing": "in", "entrance": true}],
+  "windows": [{"at": [1.8, 3.3], "width": 1.2, "sill": 0.9}],
+  "furniture": [
+    {"name": "King bed", "type": "bed", "width": 1.8, "depth": 2.0, "at": [1.2, 1.3], "facing": "S"},
+    {"name": "Left nightstand", "type": "nightstand", "width": 0.45, "depth": 0.4, "at": [0.75, 2.9]},
+    {"name": "Right nightstand", "type": "nightstand", "width": 0.45, "depth": 0.4, "at": [3.0, 2.9]},
+    {"name": "Wardrobe", "type": "wardrobe", "width": 1.2, "depth": 0.6, "at": [0, 1.6], "facing": "E"},
+    {"name": "Desk", "type": "desk", "width": 0.9, "depth": 0.45, "at": [0, 0], "facing": "N"}
+  ]
+}
+```
+
+```
+| King bed | bed | 1.8 × 2 | 1.2, 1.3 | S | front 0.6, left 0.6, right 0.6 |
+| Left nightstand | nightstand | 0.45 × 0.4 | 0.75, 2.9 | S | none |
+| Right nightstand | nightstand | 0.45 × 0.4 | 3, 2.9 | S | none |
+| Wardrobe | wardrobe | 1.2 × 0.6 | 0, 1.6 | E | front 0.6 |
+| Desk | desk | 0.9 × 0.45 | 0, 0 | N | front 0.9 |
+
+Floor 11.88 m² · furniture 5.09 m² (43 %) · walkway 0.90 m
+
+PASS no overlaps, every piece in the room, no door swing blocked, every clearance clear,
+every piece reached at the walkway width.
+```
+
+The drawing is [`king-bed-bedroom.svg`](king-bed-bedroom.svg).
+
+## The reply
+
+> **The plan is in `bedroom.svg`.** The king bed sits against the north wall under the
+> window, the wardrobe on the west wall beside it, and the desk in the south-west corner.
+> From the door there's a clear 0.9 m route along the foot of the bed to both sides and the
+> wardrobe.
+>
+> | Piece | Size | Where |
+> |---|---|---|
+> | King bed | 1.8 × 2.0 m | head on the north wall, 1.2 m from the west wall |
+> | Nightstands | 0.45 × 0.4 m | either side of the bed's head |
+> | Wardrobe | 1.2 × 0.6 m | west wall, doors opening east beside the bed |
+> | Desk | 0.9 × 0.45 m | south-west corner, chair facing the wall |
+>
+> **One change from what you asked:** the desk is 0.9 × 0.45 m, not a standard 1.0 × 0.5 m.
+> At the standard size, its corner comes within 0.81 m of the bed's foot. You could squeeze
+> past, but not walk through, to the wardrobe. If you'd rather keep a full-size desk, a
+> queen bed (1.5 × 2.0 m) in the same place, its left edge 0.3 m further east, leaves room
+> for it; that layout passes the same checks.
+>
+> **Assumed:** nightstands 0.45 × 0.4 m. The door is hinged on the east side as you face it
+> from inside, swinging into the room.
+>
+> **This is a schematic.** It meets the clearances set here: 0.6 m beside and at the foot of
+> the bed, 0.6 m in front of the wardrobe, 0.9 m behind the desk, and a 0.9 m route. It isn't
+> a check against any building or accessibility code. Measure the real room, and the
+> wardrobe's door width, before you buy.
+
+## Why this is the oracle
+
+- **Area is not fit.** 43 % coverage looks comfortable. The failures are a door swing and a
+  0.81 m diagonal, which no area sum shows.
+- **A layout is shown only after it passes,** and when the list doesn't fit as given, the
+  reply names the piece, the number (0.81 m, not 0.9) and the smallest change that works.
+- **The reply is for the client.** It gives a plan, a table, one change with its reason,
+  the assumptions and what the plan is not. It never mentions the checker, the JSON or
+  where the file was written from.
+
+A cheaper pass answers "yes, it all fits: 5 m² of furniture in a 12 m² room". It then puts
+the desk by the door, where the door hits it on every opening. Or it puts the full-size desk
+in the corner and leaves a gap you turn sideways to get through to the wardrobe.

package/packs/interior-designer/skills/furniture-layout/examples/king-bed-bedroom.svg

@@ -0,0 +1,57 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="920" height="890" viewBox="0 0 920 890" font-family="Helvetica, Arial, sans-serif" font-size="11">
+<rect width="920" height="890" fill="#fff"/>
+<text x="20" y="28" font-size="16" font-weight="bold">Bedroom, 3.6 × 3.3 m: king bed, wardrobe and desk</text>
+<text x="20" y="46" fill="#444">Floor 11.88 m² · walkway 0.90 m · checked: passes · schematic</text>
+<polygon points="80.0,780.0 800.0,780.0 800.0,120.0 80.0,120.0" fill="#faf8f4"/>
+<rect x="320.0" y="520.0" width="360.0" height="120.0" fill="#7fb3d5" fill-opacity="0.18" stroke="#5d8fb0" stroke-width="0.6" stroke-dasharray="3 2"/>
+<rect x="200.0" y="230.0" width="120.0" height="290.0" fill="#7fb3d5" fill-opacity="0.18" stroke="#5d8fb0" stroke-width="0.6" stroke-dasharray="3 2"/>
+<rect x="680.0" y="230.0" width="120.0" height="290.0" fill="#7fb3d5" fill-opacity="0.18" stroke="#5d8fb0" stroke-width="0.6" stroke-dasharray="3 2"/>
+<rect x="200.0" y="220.0" width="120.0" height="240.0" fill="#7fb3d5" fill-opacity="0.18" stroke="#5d8fb0" stroke-width="0.6" stroke-dasharray="3 2"/>
+<rect x="80.0" y="510.0" width="180.0" height="180.0" fill="#7fb3d5" fill-opacity="0.18" stroke="#5d8fb0" stroke-width="0.6" stroke-dasharray="3 2"/>
+<polyline points="700.0,780.0 697.5,687.5 382.5,687.5 332.5,637.5 332.5,637.5" fill="none" stroke="#2e8b57" stroke-width="1.6" stroke-dasharray="6 3" stroke-linecap="round"/>
+<polyline points="700.0,780.0 697.5,687.5 387.5,687.5 227.5,542.5 227.5,520.0" fill="none" stroke="#2e8b57" stroke-width="1.6" stroke-dasharray="6 3" stroke-linecap="round"/>
+<polyline points="700.0,780.0 707.5,602.5 707.5,520.0" fill="none" stroke="#2e8b57" stroke-width="1.6" stroke-dasharray="6 3" stroke-linecap="round"/>
+<polyline points="700.0,780.0 697.5,687.5 387.5,687.5 227.5,542.5 227.5,460.0" fill="none" stroke="#2e8b57" stroke-width="1.6" stroke-dasharray="6 3" stroke-linecap="round"/>
+<polyline points="700.0,780.0 697.5,687.5 387.5,687.5 302.5,607.5 167.5,602.5 167.5,602.5" fill="none" stroke="#2e8b57" stroke-width="1.6" stroke-dasharray="6 3" stroke-linecap="round"/>
+<rect x="320.0" y="120.0" width="360.0" height="400.0" fill="#e9e4dc" stroke="#4a4a4a" stroke-width="1.2"/>
+<line x1="320.0" y1="520.0" x2="680.0" y2="520.0" stroke="#1f1f1f" stroke-width="2.4"/>
+<text x="500.0" y="318.0" text-anchor="middle" font-weight="bold" font-size="11">King bed</text>
+<text x="500.0" y="331.0" text-anchor="middle" font-size="10" fill="#444">1.8×2</text>
+<rect x="230.0" y="120.0" width="90.0" height="80.0" fill="#e9e4dc" stroke="#4a4a4a" stroke-width="1.2"/>
+<line x1="230.0" y1="200.0" x2="320.0" y2="200.0" stroke="#1f1f1f" stroke-width="2.4"/>
+<text x="275.0" y="158.0" text-anchor="middle" font-weight="bold" font-size="11">Left nightstand</text>
+<text x="275.0" y="171.0" text-anchor="middle" font-size="10" fill="#444">0.45×0.4</text>
+<rect x="680.0" y="120.0" width="90.0" height="80.0" fill="#e9e4dc" stroke="#4a4a4a" stroke-width="1.2"/>
+<line x1="680.0" y1="200.0" x2="770.0" y2="200.0" stroke="#1f1f1f" stroke-width="2.4"/>
+<text x="725.0" y="158.0" text-anchor="middle" font-weight="bold" font-size="11">Right nightstand</text>
+<text x="725.0" y="171.0" text-anchor="middle" font-size="10" fill="#444">0.45×0.4</text>
+<rect x="80.0" y="220.0" width="120.0" height="240.0" fill="#e9e4dc" stroke="#4a4a4a" stroke-width="1.2"/>
+<line x1="200.0" y1="460.0" x2="200.0" y2="220.0" stroke="#1f1f1f" stroke-width="2.4"/>
+<text x="140.0" y="338.0" text-anchor="middle" font-weight="bold" font-size="11">Wardrobe</text>
+<text x="140.0" y="351.0" text-anchor="middle" font-size="10" fill="#444">1.2×0.6</text>
+<rect x="80.0" y="690.0" width="180.0" height="90.0" fill="#e9e4dc" stroke="#4a4a4a" stroke-width="1.2"/>
+<line x1="80.0" y1="690.0" x2="260.0" y2="690.0" stroke="#1f1f1f" stroke-width="2.4"/>
+<text x="170.0" y="733.0" text-anchor="middle" font-weight="bold" font-size="11">Desk</text>
+<text x="170.0" y="746.0" text-anchor="middle" font-size="10" fill="#444">0.9×0.45</text>
+<polygon points="80.0,780.0 800.0,780.0 800.0,120.0 80.0,120.0" fill="none" stroke="#111" stroke-width="24.0" stroke-linejoin="miter"/>
+<line x1="320.0" y1="120.0" x2="560.0" y2="120.0" stroke="#fff" stroke-width="25.0"/>
+<line x1="320.0" y1="112.0" x2="560.0" y2="112.0" stroke="#2b6cb0" stroke-width="1"/>
+<line x1="320.0" y1="120.0" x2="560.0" y2="120.0" stroke="#2b6cb0" stroke-width="1"/>
+<line x1="320.0" y1="128.0" x2="560.0" y2="128.0" stroke="#2b6cb0" stroke-width="1"/>
+<line x1="620.0" y1="780.0" x2="780.0" y2="780.0" stroke="#fff" stroke-width="25.0"/>
+<line x1="780.0" y1="780.0" x2="780.0" y2="620.0" stroke="#b5531a" stroke-width="1.6"/>
+<path d="M 780.0 620.0 A 160.0 160.0 0 0 0 620.0 780.0" fill="none" stroke="#b5531a" stroke-width="0.8" stroke-dasharray="3 2"/>
+<text x="700.0" y="853.0" text-anchor="middle" font-size="9" fill="#b5531a">Door</text>
+<line x1="80.0" y1="810.0" x2="800.0" y2="810.0" stroke="#555" stroke-width="0.8"/>
+<line x1="76.0" y1="814.0" x2="84.0" y2="806.0" stroke="#555" stroke-width="1.2"/>
+<line x1="796.0" y1="814.0" x2="804.0" y2="806.0" stroke="#555" stroke-width="1.2"/>
+<text x="440.0" y="805.0" text-anchor="middle">3.6 m</text>
+<line x1="50.0" y1="780.0" x2="50.0" y2="120.0" stroke="#555" stroke-width="0.8"/>
+<line x1="46.0" y1="784.0" x2="54.0" y2="776.0" stroke="#555" stroke-width="1.2"/>
+<line x1="46.0" y1="124.0" x2="54.0" y2="116.0" stroke="#555" stroke-width="1.2"/>
+<text x="44.0" y="450.0" text-anchor="middle" transform="rotate(-90 44.0 450.0)">3.3 m</text>
+<g transform="translate(880 40) rotate(0.0)"><polygon points="0,-20 7,9 0,4 -7,9" fill="#111"/><text x="0" y="-25" text-anchor="middle" font-weight="bold">N</text></g>
+<rect x="80" y="866.0" width="100.0" height="6" fill="#111"/>
+<rect x="180.0" y="866.0" width="100.0" height="6" fill="#fff" stroke="#111"/>
+<text x="286.0" y="872.0">1 m</text>
+</svg>

package/packs/interior-designer/skills/furniture-layout/manifest.json

@@ -0,0 +1,44 @@
+{
+  "name": "furniture-layout",
+  "version": "0.2.1",
+  "description": "Lay out the furniture in a room at real sizes and draw it as a dimensioned SVG, with a script that fails the layout when pieces overlap or leave the room, block a door's swing, or leave a walkway, bed side, chair pull-back or wheelchair turning space narrower than it needs. Use when a designer or homeowner asks to \"lay out this living room\", \"will a king bed fit\", \"arrange the furniture\", \"plan this office for 8 desks\", \"check the clearances\", or has a room's size, its doors and windows and a list of furniture.",
+  "entrypoint": "SKILL.md",
+  "deps": {
+    "npm": [],
+    "pip": []
+  },
+  "env": {
+    "required": [],
+    "optional": []
+  },
+  "related": [
+    "floor-plan-layout"
+  ],
+  "handoff": [
+    {
+      "to": "floor-plan-layout",
+      "when": "the room's size or its walls aren't settled yet, or the person wants the whole floor planned",
+      "purpose": "Plan the rooms and their doors first, so each room has a size to furnish.",
+      "fallback": "If floor-plan-layout is absent, ask for the room's width, depth and door positions, or take them from a drawing the person has, before placing any furniture."
+    }
+  ],
+  "tags": [
+    "interior-design",
+    "furniture",
+    "layout",
+    "clearances",
+    "space-planning",
+    "svg",
+    "dimensions"
+  ],
+  "permissions": {
+    "network": [],
+    "commands": [],
+    "files": "named-paths",
+    "notes": "Reads the layout.json it is given and writes the SVG to the path passed with --svg."
+  },
+  "model": {
+    "tier": "heavy",
+    "rationale": "Furnishing a room is design judgment: zones, focal wall and circulation traded against clearances, with a checker to iterate against."
+  }
+}