promptgraph-mcp 2.4.7 → 2.4.8

package/registry/training/bad/send-README.md

@@ -1,317 +0,0 @@
-# send
-
-[![NPM Version][npm-version-image]][npm-url]
-[![NPM Downloads][npm-downloads-image]][npm-url]
-[![CI][github-actions-ci-image]][github-actions-ci-url]
-[![Test Coverage][coveralls-image]][coveralls-url]
-
-Send is a library for streaming files from the file system as a http response
-supporting partial responses (Ranges), conditional-GET negotiation (If-Match,
-If-Unmodified-Since, If-None-Match, If-Modified-Since), high test coverage,
-and granular events which may be leveraged to take appropriate actions in your
-application or framework.
-
-Looking to serve up entire folders mapped to URLs? Try [serve-static](https://www.npmjs.org/package/serve-static).
-
-## Installation
-
-This is a [Node.js](https://nodejs.org/en/) module available through the
-[npm registry](https://www.npmjs.com/). Installation is done using the
-[`npm install` command](https://docs.npmjs.com/getting-started/installing-npm-packages-locally):
-
-```bash
-$ npm install send
-```
-
-## API
-
-```js
-var send = require('send')
-```
-
-### send(req, path, [options])
-
-Create a new `SendStream` for the given path to send to a `res`. The `req` is
-the Node.js HTTP request and the `path` is a urlencoded path to send (urlencoded,
-not the actual file-system path).
-
-#### Options
-
-##### acceptRanges
-
-Enable or disable accepting ranged requests, defaults to true.
-Disabling this will not send `Accept-Ranges` and ignore the contents
-of the `Range` request header.
-
-##### cacheControl
-
-Enable or disable setting `Cache-Control` response header, defaults to
-true. Disabling this will ignore the `immutable` and `maxAge` options.
-
-##### dotfiles
-
-Set how "dotfiles" are treated when encountered. A dotfile is a file
-or directory that begins with a dot ("."). Note this check is done on
-the path itself without checking if the path actually exists on the
-disk. If `root` is specified, only the dotfiles above the root are
-checked (i.e. the root itself can be within a dotfile when set
-to "deny").
-
-  - `'allow'` No special treatment for dotfiles.
-  - `'deny'` Send a 403 for any request for a dotfile.
-  - `'ignore'` Pretend like the dotfile does not exist and 404.
-
-The default value is _similar_ to `'ignore'`, with the exception that
-this default will not ignore the files within a directory that begins
-with a dot, for backward-compatibility.
-
-##### end
-
-Byte offset at which the stream ends, defaults to the length of the file
-minus 1. The end is inclusive in the stream, meaning `end: 3` will include
-the 4th byte in the stream.
-
-##### etag
-
-Enable or disable etag generation, defaults to true.
-
-##### extensions
-
-If a given file doesn't exist, try appending one of the given extensions,
-in the given order. By default, this is disabled (set to `false`). An
-example value that will serve extension-less HTML files: `['html', 'htm']`.
-This is skipped if the requested file already has an extension.
-
-##### immutable
-
-Enable or disable the `immutable` directive in the `Cache-Control` response
-header, defaults to `false`. If set to `true`, the `maxAge` option should
-also be specified to enable caching. The `immutable` directive will prevent
-supported clients from making conditional requests during the life of the
-`maxAge` option to check if the file has changed.
-
-##### index
-
-By default send supports "index.html" files, to disable this
-set `false` or to supply a new index pass a string or an array
-in preferred order.
-
-##### lastModified
-
-Enable or disable `Last-Modified` header, defaults to true. Uses the file
-system's last modified value.
-
-##### maxAge
-
-Provide a max-age in milliseconds for http caching, defaults to 0.
-This can also be a string accepted by the
-[ms](https://www.npmjs.org/package/ms#readme) module.
-
-##### root
-
-Serve files relative to `path`.
-
-##### start
-
-Byte offset at which the stream starts, defaults to 0. The start is inclusive,
-meaning `start: 2` will include the 3rd byte in the stream.
-
-#### Events
-
-The `SendStream` is an event emitter and will emit the following events:
-
-  - `error` an error occurred `(err)`
-  - `directory` a directory was requested `(res, path)`
-  - `file` a file was requested `(path, stat)`
-  - `headers` the headers are about to be set on a file `(res, path, stat)`
-  - `stream` file streaming has started `(stream)`
-  - `end` streaming has completed
-
-#### .pipe
-
-The `pipe` method is used to pipe the response into the Node.js HTTP response
-object, typically `send(req, path, options).pipe(res)`.
-
-## Error-handling
-
-By default when no `error` listeners are present an automatic response will be
-made, otherwise you have full control over the response, aka you may show a 5xx
-page etc.
-
-## Caching
-
-It does _not_ perform internal caching, you should use a reverse proxy cache
-such as Varnish for this, or those fancy things called CDNs. If your
-application is small enough that it would benefit from single-node memory
-caching, it's small enough that it does not need caching at all ;).
-
-## Debugging
-
-To enable `debug()` instrumentation output export __DEBUG__:
-
-```
-$ DEBUG=send node app
-```
-
-## Running tests
-
-```
-$ npm install
-$ npm test
-```
-
-## Examples
-
-### Serve a specific file
-
-This simple example will send a specific file to all requests.
-
-```js
-var http = require('http')
-var send = require('send')
-
-var server = http.createServer(function onRequest (req, res) {
-  send(req, '/path/to/index.html')
-    .pipe(res)
-})
-
-server.listen(3000)
-```
-
-### Serve all files from a directory
-
-This simple example will just serve up all the files in a
-given directory as the top-level. For example, a request
-`GET /foo.txt` will send back `/www/public/foo.txt`.
-
-```js
-var http = require('http')
-var parseUrl = require('parseurl')
-var send = require('send')
-
-var server = http.createServer(function onRequest (req, res) {
-  send(req, parseUrl(req).pathname, { root: '/www/public' })
-    .pipe(res)
-})
-
-server.listen(3000)
-```
-
-### Custom file types
-
-```js
-var extname = require('path').extname
-var http = require('http')
-var parseUrl = require('parseurl')
-var send = require('send')
-
-var server = http.createServer(function onRequest (req, res) {
-  send(req, parseUrl(req).pathname, { root: '/www/public' })
-    .on('headers', function (res, path) {
-      switch (extname(path)) {
-        case '.x-mt':
-        case '.x-mtt':
-          // custom type for these extensions
-          res.setHeader('Content-Type', 'application/x-my-type')
-          break
-      }
-    })
-    .pipe(res)
-})
-
-server.listen(3000)
-```
-
-### Custom directory index view
-
-This is an example of serving up a structure of directories with a
-custom function to render a listing of a directory.
-
-```js
-var http = require('http')
-var fs = require('fs')
-var parseUrl = require('parseurl')
-var send = require('send')
-
-// Transfer arbitrary files from within /www/example.com/public/*
-// with a custom handler for directory listing
-var server = http.createServer(function onRequest (req, res) {
-  send(req, parseUrl(req).pathname, { index: false, root: '/www/public' })
-    .once('directory', directory)
-    .pipe(res)
-})
-
-server.listen(3000)
-
-// Custom directory handler
-function directory (res, path) {
-  var stream = this
-
-  // redirect to trailing slash for consistent url
-  if (!stream.hasTrailingSlash()) {
-    return stream.redirect(path)
-  }
-
-  // get directory list
-  fs.readdir(path, function onReaddir (err, list) {
-    if (err) return stream.error(err)
-
-    // render an index for the directory
-    res.setHeader('Content-Type', 'text/plain; charset=UTF-8')
-    res.end(list.join('\n') + '\n')
-  })
-}
-```
-
-### Serving from a root directory with custom error-handling
-
-```js
-var http = require('http')
-var parseUrl = require('parseurl')
-var send = require('send')
-
-var server = http.createServer(function onRequest (req, res) {
-  // your custom error-handling logic:
-  function error (err) {
-    res.statusCode = err.status || 500
-    res.end(err.message)
-  }
-
-  // your custom headers
-  function headers (res, path, stat) {
-    // serve all files for download
-    res.setHeader('Content-Disposition', 'attachment')
-  }
-
-  // your custom directory handling logic:
-  function redirect () {
-    res.statusCode = 301
-    res.setHeader('Location', req.url + '/')
-    res.end('Redirecting to ' + req.url + '/')
-  }
-
-  // transfer arbitrary files from within
-  // /www/example.com/public/*
-  send(req, parseUrl(req).pathname, { root: '/www/public' })
-    .on('error', error)
-    .on('directory', redirect)
-    .on('headers', headers)
-    .pipe(res)
-})
-
-server.listen(3000)
-```
-
-## License
-
-[MIT](LICENSE)
-
-[coveralls-image]: https://badgen.net/coveralls/c/github/pillarjs/send/master
-[coveralls-url]: https://coveralls.io/r/pillarjs/send?branch=master
-[github-actions-ci-image]: https://badgen.net/github/checks/pillarjs/send/master?label=linux
-[github-actions-ci-url]: https://github.com/pillarjs/send/actions/workflows/ci.yml
-[node-image]: https://badgen.net/npm/node/send
-[node-url]: https://nodejs.org/en/download/
-[npm-downloads-image]: https://badgen.net/npm/dm/send
-[npm-url]: https://npmjs.org/package/send
-[npm-version-image]: https://badgen.net/npm/v/send

package/registry/training/bad/serve-static-README.md

@@ -1,253 +0,0 @@
-# serve-static
-
-[![NPM Version][npm-version-image]][npm-url]
-[![NPM Downloads][npm-downloads-image]][npm-url]
-[![CI][github-actions-ci-image]][github-actions-ci-url]
-[![Test Coverage][coveralls-image]][coveralls-url]
-
-## Install
-
-This is a [Node.js](https://nodejs.org/en/) module available through the
-[npm registry](https://www.npmjs.com/). Installation is done using the
-[`npm install` command](https://docs.npmjs.com/getting-started/installing-npm-packages-locally):
-
-```sh
-$ npm install serve-static
-```
-
-## API
-
-```js
-const serveStatic = require('serve-static')
-```
-
-### serveStatic(root, options)
-
-Create a new middleware function to serve files from within a given root
-directory. The file to serve will be determined by combining `req.url`
-with the provided root directory. When a file is not found, instead of
-sending a 404 response, this module will instead call `next()` to move on
-to the next middleware, allowing for stacking and fall-backs.
-
-#### Options
-
-##### acceptRanges
-
-Enable or disable accepting ranged requests, defaults to true.
-Disabling this will not send `Accept-Ranges` and ignore the contents
-of the `Range` request header.
-
-##### cacheControl
-
-Enable or disable setting `Cache-Control` response header, defaults to
-true. Disabling this will ignore the `immutable` and `maxAge` options.
-
-##### dotfiles
-
-Set how "dotfiles" are treated when encountered. A dotfile is a file
-or directory that begins with a dot ("."). Note this check is done on
-the path itself without checking if the path actually exists on the
-disk. If `root` is specified, only the dotfiles above the root are
-checked (i.e. the root itself can be within a dotfile when set
-to "deny").
-
-  - `'allow'` No special treatment for dotfiles.
-  - `'deny'` Deny a request for a dotfile and 403/`next()`.
-  - `'ignore'` Pretend like the dotfile does not exist and 404/`next()`.
-
-The default value is `'ignore'`.
-
-##### etag
-
-Enable or disable etag generation, defaults to true.
-
-##### extensions
-
-Set file extension fallbacks. When set, if a file is not found, the given
-extensions will be added to the file name and search for. The first that
-exists will be served. Example: `['html', 'htm']`.
-
-The default value is `false`.
-
-##### fallthrough
-
-Set the middleware to have client errors fall-through as just unhandled
-requests, otherwise forward a client error. The difference is that client
-errors like a bad request or a request to a non-existent file will cause
-this middleware to simply `next()` to your next middleware when this value
-is `true`. When this value is `false`, these errors (even 404s), will invoke
-`next(err)`.
-
-Typically `true` is desired such that multiple physical directories can be
-mapped to the same web address or for routes to fill in non-existent files.
-
-The value `false` can be used if this middleware is mounted at a path that
-is designed to be strictly a single file system directory, which allows for
-short-circuiting 404s for less overhead. This middleware will also reply to
-all methods.
-
-The default value is `true`.
-
-##### immutable
-
-Enable or disable the `immutable` directive in the `Cache-Control` response
-header, defaults to `false`. If set to `true`, the `maxAge` option should
-also be specified to enable caching. The `immutable` directive will prevent
-supported clients from making conditional requests during the life of the
-`maxAge` option to check if the file has changed.
-
-##### index
-
-By default this module will send "index.html" files in response to a request
-on a directory. To disable this set `false` or to supply a new index pass a
-string or an array in preferred order.
-
-##### lastModified
-
-Enable or disable `Last-Modified` header, defaults to true. Uses the file
-system's last modified value.
-
-##### maxAge
-
-Provide a max-age in milliseconds for http caching, defaults to 0. This
-can also be a string accepted by the [ms](https://www.npmjs.org/package/ms#readme)
-module.
-
-##### redirect
-
-Redirect to trailing "/" when the pathname is a dir. Defaults to `true`.
-
-##### setHeaders
-
-Function to set custom headers on response. Alterations to the headers need to
-occur synchronously. The function is called as `fn(res, path, stat)`, where
-the arguments are:
-
-  - `res` the response object
-  - `path` the file path that is being sent
-  - `stat` the stat object of the file that is being sent
-
-## Examples
-
-### Serve files with vanilla node.js http server
-
-```js
-const finalhandler = require('finalhandler')
-const http = require('http')
-const serveStatic = require('serve-static')
-
-// Serve up public/ftp folder
-const serve = serveStatic('public/ftp', { index: ['index.html', 'index.htm'] })
-
-// Create server
-const server = http.createServer((req, res) => {
-  serve(req, res, finalhandler(req, res))
-})
-
-// Listen
-server.listen(3000)
-```
-
-### Serve all files as downloads
-
-```js
-const contentDisposition = require('content-disposition')
-const finalhandler = require('finalhandler')
-const http = require('http')
-const serveStatic = require('serve-static')
-
-// Serve up public/ftp folder
-const serve = serveStatic('public/ftp', {
-  index: false,
-  setHeaders: setHeaders
-})
-
-// Set header to force download
-function setHeaders (res, path) {
-  res.setHeader('Content-Disposition', contentDisposition(path))
-}
-
-// Create server
-const server = http.createServer((req, res) => {
-  serve(req, res, finalhandler(req, res))
-})
-
-// Listen
-server.listen(3000)
-```
-
-### Serving using express
-
-#### Simple
-
-This is a simple example of using Express.
-
-```js
-const express = require('express')
-const serveStatic = require('serve-static')
-
-const app = express()
-
-app.use(serveStatic('public/ftp', { index: ['default.html', 'default.htm'] }))
-app.listen(3000)
-```
-
-#### Multiple roots
-
-This example shows a simple way to search through multiple directories.
-Files are searched for in `public-optimized/` first, then `public/` second
-as a fallback.
-
-```js
-const express = require('express')
-const path = require('path')
-const serveStatic = require('serve-static')
-
-const app = express()
-
-app.use(serveStatic(path.join(__dirname, 'public-optimized')))
-app.use(serveStatic(path.join(__dirname, 'public')))
-app.listen(3000)
-```
-
-#### Different settings for paths
-
-This example shows how to set a different max age depending on the served
-file. In this example, HTML files are not cached, while everything else
-is for 1 day.
-
-```js
-const express = require('express')
-const path = require('path')
-const serveStatic = require('serve-static')
-
-const app = express()
-
-app.use(serveStatic(path.join(__dirname, 'public'), {
-  maxAge: '1d',
-  setHeaders: setCustomCacheControl
-}))
-
-app.listen(3000)
-
-function setCustomCacheControl (res, file) {
-  if (path.extname(file) === '.html') {
-    // Custom Cache-Control for HTML files
-    res.setHeader('Cache-Control', 'public, max-age=0')
-  }
-}
-```
-
-## License
-
-[MIT](LICENSE)
-
-[coveralls-image]: https://badgen.net/coveralls/c/github/expressjs/serve-static/master
-[coveralls-url]: https://coveralls.io/r/expressjs/serve-static?branch=master
-[github-actions-ci-image]: https://badgen.net/github/checks/expressjs/serve-static/master?label=linux
-[github-actions-ci-url]: https://github.com/expressjs/serve-static/actions/workflows/ci.yml
-[node-image]: https://badgen.net/npm/node/serve-static
-[node-url]: https://nodejs.org/en/download/
-[npm-downloads-image]: https://badgen.net/npm/dm/serve-static
-[npm-url]: https://npmjs.org/package/serve-static
-[npm-version-image]: https://badgen.net/npm/v/serve-static

package/registry/training/bad/statuses-HISTORY.md

@@ -1,87 +0,0 @@
-2.0.2 / 2025-06-06
-==================
-
-  * Migrate to `String.prototype.slice()`
-
-2.0.1 / 2021-01-03
-==================
-
-  * Fix returning values from `Object.prototype`
-
-2.0.0 / 2020-04-19
-==================
-
-  * Drop support for Node.js 0.6
-  * Fix messaging casing of `418 I'm a Teapot`
-  * Remove code 306
-  * Remove `status[code]` exports; use `status.message[code]`
-  * Remove `status[msg]` exports; use `status.code[msg]`
-  * Rename `425 Unordered Collection` to standard `425 Too Early`
-  * Rename `STATUS_CODES` export to `message`
-  * Return status message for `statuses(code)` when given code
-
-1.5.0 / 2018-03-27
-==================
-
-  * Add `103 Early Hints`
-
-1.4.0 / 2017-10-20
-==================
-
-  * Add `STATUS_CODES` export
-
-1.3.1 / 2016-11-11
-==================
-
-  * Fix return type in JSDoc
-
-1.3.0 / 2016-05-17
-==================
-
-  * Add `421 Misdirected Request`
-  * perf: enable strict mode
-
-1.2.1 / 2015-02-01
-==================
-
-  * Fix message for status 451
-    - `451 Unavailable For Legal Reasons`
-
-1.2.0 / 2014-09-28
-==================
-
-  * Add `208 Already Repored`
-  * Add `226 IM Used`
-  * Add `306 (Unused)`
-  * Add `415 Unable For Legal Reasons`
-  * Add `508 Loop Detected`
-
-1.1.1 / 2014-09-24
-==================
-
-  * Add missing 308 to `codes.json`
-
-1.1.0 / 2014-09-21
-==================
-
-  * Add `codes.json` for universal support
-
-1.0.4 / 2014-08-20
-==================
-
-  * Package cleanup
-
-1.0.3 / 2014-06-08
-==================
-
-  * Add 308 to `.redirect` category
-
-1.0.2 / 2014-03-13
-==================
-
-  * Add `.retry` category
-
-1.0.1 / 2014-03-12
-==================
-
-  * Initial release