plotboilerplate 1.28.0 → 1.28.1

package/src/_cjs/CubicBezierCurve.d.ts

@@ -1,656 +0,0 @@
-/**
- * @author   Ikaros Kappler
- * @date     2013-08-15
- * @modified 2018-08-16 Added a closure. Removed the wrapper class 'IKRS'. Replaced class THREE.Vector2 by Vertex class.
- * @modified 2018-11-19 Added the fromArray(Array) function.
- * @modified 2018-11-28 Added the locateCurveByPoint(Vertex) function.
- * @modified 2018-12-04 Added the toSVGPathData() function.
- * @modified 2019-03-20 Added JSDoc tags.
- * @modified 2019-03-23 Changed the signatures of getPoint, getPointAt and getTangent (!version 2.0).
- * @modified 2019-12-02 Fixed the updateArcLength function. It used the wrong pointAt function (was renamed before).
- * @modified 2020-02-06 Added the getSubCurveAt(number,number) function.
- * @modified 2020-02-06 Fixed a serious bug in the arc lenght calculation (length was never reset, urgh).
- * @modified 2020-02-07 Added the isInstance(any) function.
- * @modified 2020-02-10 Added the reverse() function.
- * @modified 2020-02-10 Fixed the translate(...) function (returning 'this' was missing).
- * @modified 2020-03-24 Ported this class from vanilla JS to Typescript.
- * @modified 2020-06-03 Added the getBounds() function.
- * @modified 2020-07-14 Changed the moveCurvePoint(...,Vertex) to moveCurvePoint(...,XYCoords), which is more generic.
- * @modified 2020-07-24 Added the getClosestT function and the helper function locateIntervalByDistance(...).
- * @modified 2021-01-20 Added UID.
- * @modified 2022-02-02 Added the `destroy` method.
- * @modified 2022-02-02 Cleared the `toSVGPathData` function (deprecated). Use `drawutilssvg` instead.
- * @modified 2022-10-17 The `CubicBezierCurve` class now implements the new `PathSegment` interface.
- * @modified 2023-09-30 Added the function `CubicbezierCurve.getSubCurve(number,number)` – similar to `getSubCurveAt(...)` but with absolute position parameters.
- * @modified 2023-10-07 Added the `trimEnd`, `trimEndAt`, `trimStart`, `trimStartAt` methods.
- * @modified 2025-04-09 Added the `CubicBezierCurve.move` method to match the convention – which just calls `translate`.
- * @modified 2025-04-09 Modified the `CubicBezierCurve.translate` method: chaning parameter `Vertex` to more generalized `XYCoords`.
- * @modified 2025-04-13 Changed visibility of `CubicBezierCurve.utils` from 'private' to  'public'.
- * @modified 2025-04-13 Added helper function `CubicBezierCurve.utils.bezierCoeffs`.
- * @modified 2025-04-13 Added helper functopn `CubicBezierCurve.utils.sgn(number)` for division safe sign calculation.
- * @modified 2025-03-13 Class `CubicBezierCurve` is now implementing interface `Intersectable`.
- * @modified 2025-04-18 Added evaluation method for cubic Bézier curves `CubicBezierCurve.utils.evaluateT`.
- * @modified 2025-04-18 Refactored method `CubicBezierCurve.getPointAt` to use `evaluateT`.
- * @modified 2025-04-18 Fixed the `CubicBezierCurve.getBounds` method: now returning the real bounding box. Before it was an approximated one.
- * @modified 2025-ß4-18 Added helper methods for bounding box calculation `CubucBezierCurve.util.cubicPolyMinMax` and `cubicPoly`.
- * @version 2.9.0
- *
- * @file CubicBezierCurve
- * @public
- **/
-import { Bounds } from "./Bounds";
-import { Vertex } from "./Vertex";
-import { Vector } from "./Vector";
-import { XYCoords, UID, PathSegment, Intersectable, IBounded } from "./interfaces";
-import { VertTuple } from "./VertTuple";
-/**
- * @classdesc A refactored cubic bezier curve class.
- *
- * @requires Bounds
- * @requires Vertex
- * @requires Vector
- * @requires XYCoords
- * @requires UID
- * @requires UIDGenerator
- */
-export declare class CubicBezierCurve implements IBounded, Intersectable, PathSegment {
-    /** @constant {number} */
-    static readonly START_POINT: number;
-    /** @constant {number} */
-    static readonly START_CONTROL_POINT: number;
-    /** @constant {number} */
-    static readonly END_CONTROL_POINT: number;
-    /** @constant {number} */
-    static readonly END_POINT: number;
-    /** @constant {number} */
-    readonly START_POINT: number;
-    /** @constant {number} */
-    readonly START_CONTROL_POINT: number;
-    /** @constant {number} */
-    readonly END_CONTROL_POINT: number;
-    /** @constant {number} */
-    readonly END_POINT: number;
-    /**
-     * The UID of this drawable object.
-     *
-     * @member {UID}
-     * @memberof CubicBezierCurve
-     * @instance
-     * @readonly
-     */
-    readonly uid: UID;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    startPoint: Vertex;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    endPoint: Vertex;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    startControlPoint: Vertex;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    endControlPoint: Vertex;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    curveIntervals: number;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    segmentCache: Array<Vertex>;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    segmentLengths: Array<number>;
-    /**
-     * @member {CubicBezierCurve}
-     * @memberof CubicBezierCurve
-     * @instance
-     */
-    arcLength: number;
-    /**
-     * @member isDestroyed
-     * @memberof CubicBezierCurve
-     * @type {boolean}
-     * @instance
-     */
-    isDestroyed: boolean;
-    /**
-     * The constructor.
-     *
-     * @constructor
-     * @name CubicBezierCurve
-     * @param {Vertex} startPoint - The Bézier curve's start point.
-     * @param {Vertex} endPoint   - The Bézier curve's end point.
-     * @param {Vertex} startControlPoint - The Bézier curve's start control point.
-     * @param {Vertex} endControlPoint   - The Bézier curve's end control point.
-     **/
-    constructor(startPoint: Vertex, endPoint: Vertex, startControlPoint: Vertex, endControlPoint: Vertex);
-    /**
-     * Move the given curve point (the start point, end point or one of the two
-     * control points).
-     *
-     * @method moveCurvePoint
-     * @param {number} pointID - The numeric identicator of the point to move. Use one of the four eBezierPoint constants.
-     * @param {XYCoords} moveAmount - The amount to move the specified point by.
-     * @param {boolean} moveControlPoint - Move the control points along with their path point (if specified point is a path point).
-     * @param {boolean} updateArcLengths - Specifiy if the internal arc segment buffer should be updated.
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {void}
-     **/
-    moveCurvePoint(pointID: number, moveAmount: XYCoords, moveControlPoint: boolean, updateArcLengths: boolean): void;
-    /**
-     * Translate the whole curve by the given {x,y} amount: moves all four points.
-     *
-     * @method translate
-     * @param {XYCoords} amount - The amount to translate this curve by.
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {CubicBezierCurve} this (for chaining).
-     **/
-    translate(amount: XYCoords): CubicBezierCurve;
-    /**
-     * Translate the whole curve by the given {x,y} amount: moves all four points.
-     *
-     * @method translate
-     * @param {XYCoords} amount - The amount to translate this curve by.
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {CubicBezierCurve} this (for chaining).
-     **/
-    move(amount: XYCoords): CubicBezierCurve;
-    /**
-     * Reverse this curve, means swapping start- and end-point and swapping
-     * start-control- and end-control-point.
-     *
-     * @method reverse
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {CubicBezierCurve} this (for chaining).
-     **/
-    reverse(): CubicBezierCurve;
-    /**
-     * Get the total curve length.<br>
-     * <br>
-     * As not all Bézier curved have a closed formula to calculate their lengths, this
-     * implementation uses a segment buffer (with a length of 30 segments). So the
-     * returned length is taken from the arc segment buffer.<br>
-     * <br>
-     * Note that if the curve points were changed and the segment buffer was not
-     * updated this function might return wrong (old) values.
-     *
-     * @method getLength
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {number} >= 0
-     **/
-    getLength(): number;
-    /**
-     * Uptate the internal arc segment buffer and their lengths.<br>
-     * <br>
-     * All class functions update the buffer automatically; if any
-     * curve point is changed by other reasons you should call this
-     * function to keep actual values in the buffer.
-     *
-     * @method updateArcLengths
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {void}
-     **/
-    updateArcLengths(): void;
-    /**
-     * Get a 't' (relative position on curve) with the closest distance to point 'p'.
-     *
-     * The returned number is 0.0 <= t <= 1.0. Use the getPointAt(t) function to retrieve the actual curve point.
-     *
-     * This function uses a recursive approach by cutting the curve into several linear segments.
-     *
-     * @method getClosestT
-     * @instance
-     * @memberof CubicBezierCurve
-     * @param {Vertex} p - The point to find the closest position ('t' on the curve).
-     * @return {number}
-     **/
-    getClosestT(p: Vertex): number;
-    /**
-     * This helper function locates the 't' on a fixed step interval with the minimal distance
-     * between the curve (at 't') and the given point.
-     *
-     * Furthermore you must specify a sub curve (start 't' and end 't') you want to search on.
-     * Using tStart=0.0 and tEnd=1.0 will search on the full curve.
-     *
-     * @param {Vertex} p - The point to find the closest curve point for.
-     * @param {number} tStart - The start position (start 't' of the sub curve). Should be >= 0.0.
-     * @param {number} tEnd - The end position (end 't' of the sub curve). Should be <= 1.0.
-     * @param {number} stepCount - The number of steps to check within the interval.
-     *
-     * @return {object} - An object with t, tPrev and tNext (numbers).
-     **/
-    private locateIntervalByDistance;
-    /**
-     * Get the bounds of this bezier curve.
-     *
-     * The bounds are approximated by the underlying segment buffer; the more segment there are,
-     * the more accurate will be the returned bounds.
-     *
-     * @method getClosestT
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Bounds} The bounds of this ellipse.
-     **/
-    getBounds(): Bounds;
-    /**
-     * Get the start point of the curve.<br>
-     * <br>
-     * This function just returns this.startPoint.
-     *
-     * @method getStartPoint
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex} this.startPoint
-     **/
-    getStartPoint(): Vertex;
-    /**
-     * Get the end point of the curve.<br>
-     * <br>
-     * This function just returns this.endPoint.
-     *
-     * @method getEndPoint
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex} this.endPoint
-     **/
-    getEndPoint(): Vertex;
-    /**
-     * Get the start control point of the curve.<br>
-     * <br>
-     * This function just returns this.startControlPoint.
-     *
-     * @method getStartControlPoint
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex} this.startControlPoint
-     **/
-    getStartControlPoint(): Vertex;
-    /**
-     * Get the end control point of the curve.<br>
-     * <br>
-     * This function just returns this.endControlPoint.
-     *
-     * @method getEndControlPoint
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex} this.endControlPoint
-     **/
-    getEndControlPoint(): Vertex;
-    /**
-     * Get one of the four curve points specified by the passt point ID.
-     *
-     * @method getEndControlPoint
-     * @param {number} id - One of START_POINT, START_CONTROL_POINT, END_CONTROL_POINT or END_POINT.
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex}
-     **/
-    getPointByID(id: number): Vertex;
-    /**
-     * Get the curve point at a given position t, where t is in [0,1].<br>
-     * <br>
-     * @see Line.pointAt
-     *
-     * @method getPointAt
-     * @param {number} t - The position on the curve in [0,1] (0 means at
-     *                     start point, 1 means at end point, other values address points in bertween).
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex}
-     **/
-    getPointAt(t: number): Vertex;
-    /**
-     * Get the curve point at a given position u, where u is in [0,arcLength].<br>
-     * <br>
-     * @see CubicBezierCurve.getPointAt
-     *
-     * @method getPoint
-     * @param {number} u - The position on the curve in [0,arcLength] (0 means at
-     *                     start point, arcLength means at end point, other values address points in bertween).
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex}
-     **/
-    getPoint(u: number): Vertex;
-    /**
-     * Get the curve tangent vector at a given absolute curve position t in [0,1].<br>
-     * <br>
-     * Note that the returned tangent vector (end point) is not normalized and relative to (0,0).
-     *
-     * @method getTangent
-     * @param {number} t - The position on the curve in [0,1].
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex}
-     **/
-    getTangentAt(t: number): Vertex;
-    /**
-     * Trim off a start section of this curve. The position parameter `uValue` is the absolute position on the
-     * curve in `[0...arcLength]`.
-     * The remaining curve will be the one in the bounds `[uValue,1]` (so `[0.0,uValue]` is cut off).
-     *
-     * Note this function just converts the absolute parameter to a relative one and call `trimStartAt`.
-     *
-     * @method trimStart
-     * @instance
-     * @memberof CubicBezierCurve
-     * @param {number} uValue - The absolute position parameter where to cut off the head curve.
-     * @returns {CubicBezierCurve} `this` for chanining.
-     */
-    trimStart(uValue: number): CubicBezierCurve;
-    /**
-     * Trim off a start section of this curve. The position parameter `t` is the relative position in [0..1].
-     * The remaining curve will be the one in the bounds `[uValue,1]` (so `[0.0,uValue]` is cut off).
-     *
-     * @method trimStartAt
-     * @instance
-     * @memberof CubicBezierCurve
-     * @param {number} t - The relative position parameter where to cut off the head curve.
-     * @returns {CubicBezierCurve} `this` for chanining.
-     */
-    trimStartAt(t: number): CubicBezierCurve;
-    /**
-     * Trim off the end of this curve. The position parameter `uValue` is the absolute position on the
-     * curve in `[0...arcLength]`.
-     * The remaining curve will be the one in the bounds `[0,uValue]` (so `[1.0-uValue,1.0]` is cut off).
-     *
-     * Note this function just converts the absolute parameter to a relative one and call `trimEndAt`.
-     *
-     * @method trimEnd
-     * @instance
-     * @memberof CubicBezierCurve
-     * @param {number} uValue - The absolute position parameter where to cut off the tail curve.
-     * @returns {CubicBezierCurve} `this` for chanining.
-     */
-    trimEnd(uValue: number): CubicBezierCurve;
-    /**
-     * Trim off the end of this curve. The position parameter `t` is the relative position in [0..1].
-     * The remaining curve will be the one in the bounds `[0,t]` (so `[1.0-t,1.0]` is cut off).
-     *
-     * @method trimEndAt
-     * @instance
-     * @memberof CubicBezierCurve
-     * @param {number} t - The relative position parameter where to cut off the tail curve.
-     * @returns {CubicBezierCurve} `this` for chanining.
-     */
-    trimEndAt(t: number): CubicBezierCurve;
-    /**
-     * Get a sub curve at the given start end end positions (values on the curve's length, between 0 and curve.arcLength).
-     *
-     * tStart >= tEnd is allowed, you will get a reversed sub curve then.
-     *
-     * @method getSubCurve
-     * @param {number} tStart – The start position of the desired sub curve (must be in [0..arcLength]).
-     * @param {number} tEnd – The end position if the desired cub curve (must be in [0..arcLength]).
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {CubicBezierCurve} The sub curve as a new curve.
-     **/
-    getSubCurve(uStart: number, uEnd: number): CubicBezierCurve;
-    /**
-     * Get a sub curve at the given start end end offsets (values between 0.0 and 1.0).
-     *
-     * tStart >= tEnd is allowed, you will get a reversed sub curve then.
-     *
-     * @method getSubCurveAt
-     * @param {number} tStart – The start offset of the desired sub curve (must be in [0..1]).
-     * @param {number} tEnd – The end offset if the desired cub curve (must be in [0..1]).
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {CubicBezierCurve} The sub curve as a new curve.
-     **/
-    getSubCurveAt(tStart: number, tEnd: number): CubicBezierCurve;
-    /**
-     * Convert a relative curve position u to the absolute curve position t.
-     *
-     * @method convertU2t
-     * @param {number} u - The relative position on the curve in [0,arcLength].
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {number}
-     **/
-    convertU2T(u: number): number;
-    /**
-     * Get the curve tangent vector at a given relative position u in [0,arcLength].<br>
-     * <br>
-     * Note that the returned tangent vector (end point) is not normalized.
-     *
-     * @method getTangent
-     * @param {number} u - The position on the curve in [0,arcLength].
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex}
-     **/
-    getTangent(u: number): Vertex;
-    /**
-     * Get the curve perpendicular at a given relative position u in [0,arcLength] as a vector.<br>
-     * <br>
-     * Note that the returned vector (end point) is not normalized.
-     *
-     * @method getPerpendicular
-     * @param {number} u - The relative position on the curve in [0,arcLength].
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex}
-     **/
-    getPerpendicular(u: number): Vertex;
-    /**
-     * Get the curve perpendicular at a given absolute position t in [0,1] as a vector.<br>
-     * <br>
-     * Note that the returned vector (end point) is not normalized.
-     *
-     * @method getPerpendicularAt
-     * @param {number} u - The absolute position on the curve in [0,1].
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {Vertex}
-     **/
-    getPerpendicularAt(t: number): Vertex;
-    /**
-     * Clone this Bézier curve (deep clone).
-     *
-     * @method clone
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {CubicBezierCurve}
-     **/
-    clone(): CubicBezierCurve;
-    /**
-     * Get the tangent's end point at the start point of this segment.
-     *
-     * @method getStartTangent
-     * @memberof PathSegment
-     * @return {Vertex} The end point of the starting point's tangent.
-     */
-    getStartTangent(): Vertex;
-    /**
-     * Get the tangent's end point at the end point of this segment.
-     *
-     * @method getEndTangent
-     * @memberof PathSegment
-     * @return {Vertex} The end point of the ending point's tangent.
-     */
-    getEndTangent(): Vertex;
-    /**
-     * Get all line intersections with this shape.
-     *
-     * This method returns all intersections (as vertices) with this shape. The returned array of vertices is in no specific order.
-     *
-     * @param {VertTuple} line - The line to find intersections with.
-     * @param {boolean} inVectorBoundsOnly - If set to true only intersecion points on the passed vector are returned (located strictly between start and end vertex).
-     * @returns {Array<Vertex>} - An array of all intersections with the shape outline.
-     */
-    lineIntersections(line: VertTuple<any>, inVectorBoundsOnly?: boolean): Array<Vertex>;
-    /**
-     * Get all line intersections of this polygon and their tangents along the shape.
-     *
-     * This method returns all intersection tangents (as vectors) with this shape. The returned array of vectors is in no specific order.
-     *
-     * @param line
-     * @param lineIntersectionTangents
-     * @returns
-     */
-    lineIntersectionTangents(line: VertTuple<any>, inVectorBoundsOnly?: boolean): Array<Vector>;
-    lineIntersectionTs(line: VertTuple<any>): Array<number>;
-    /**
-     * Check if this and the specified curve are equal.<br>
-     * <br>
-     * All four points need to be equal for this, the Vertex.equals function is used.<br>
-     * <br>
-     * Please note that this function is not type safe (comparison with any object will fail).
-     *
-     * @method clone
-     * @param {CubicBezierCurve} curve - The curve to compare with.
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {boolean}
-     **/
-    equals(curve: CubicBezierCurve | undefined): boolean;
-    /**
-     * This function should invalidate any installed listeners and invalidate this object.
-     * After calling this function the object might not hold valid data any more and
-     * should not be used.
-     */
-    destroy(): void;
-    /**
-     * Quick check for class instance.
-     * Is there a better way?
-     *
-     * @method isInstance
-     * @param {any} obj - Check if the passed object/value is an instance of CubicBezierCurve.
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {boolean}
-     **/
-    static isInstance(obj: any): boolean;
-    /**
-     * Convert this curve to a JSON string.
-     *
-     * @method toJSON
-     * @param {boolean=} [prettyFormat=false] - If set to true the function will add line breaks.
-     * @instance
-     * @memberof CubicBezierCurve
-     * @return {string} The JSON data.
-     **/
-    toJSON(prettyFormat: boolean): string;
-    /**
-     * Parse a Bézier curve from the given JSON string.
-     *
-     * @method fromJSON
-     * @param {string} jsonString - The JSON data to parse.
-     * @memberof CubicBezierCurve
-     * @static
-     * @throws An exception if the JSON string is malformed.
-     * @return {CubicBezierCurve}
-     **/
-    static fromJSON(jsonString: string): CubicBezierCurve;
-    /**
-     * Try to convert the passed object to a CubicBezierCurve.
-     *
-     * @method fromObject
-     * @param {object} obj - The object to convert.
-     * @memberof CubicBezierCurve
-     * @static
-     * @throws An exception if the passed object is malformed.
-     * @return {CubicBezierCurve}
-     **/
-    static fromObject(obj: any): CubicBezierCurve;
-    /**
-     * Convert a 4-element array of vertices to a cubic bézier curve.
-     *
-     * @method fromArray
-     * @param {Vertex[]} arr -  [ startVertex, endVertex, startControlVertex, endControlVertex ]
-     * @memberof CubicBezierCurve
-     * @throws An exception if the passed array is malformed.
-     * @return {CubicBezierCurve}
-     **/
-    static fromArray(arr: Array<Vertex>): CubicBezierCurve;
-    /**
-     * Helper utils.
-     */
-    static utils: {
-        evaluateT: (p0: number, p1: number, p2: number, p3: number, t: number) => number;
-        cubicPolyMinMax: (p0: number, p1: number, p2: number, p3: number) => {
-            min: number;
-            max: number;
-        };
-        /**
-         * Get the points of a sub curve at the given start end end offsets (values between 0.0 and 1.0).
-         *
-         * tStart >= tEnd is allowed, you will get a reversed sub curve then.
-         *
-         * @method getSubCurvePointsAt
-         * @param {CubicBezierCurve} curve – The curve to get the sub curve points from.
-         * @param {number} tStart – The start offset of the desired sub curve (must be in [0..1]).
-         * @param {number} tEnd – The end offset if the desired cub curve (must be in [0..1]).
-         * @instance
-         * @memberof CubicBezierCurve
-         * @return {CubicBezierCurve} The sub curve as a new curve.
-         **/
-        getSubCurvePointsAt: (curve: CubicBezierCurve, tStart: number, tEnd: number) => [Vertex, Vertex, Vertex, Vertex];
-        /**
-         * Compute the cubic roots for the given cubic polynomial coefficients.
-         *
-         * Based on
-         *   http://mysite.verizon.net/res148h4j/javascript/script_exact_cubic.html#the%20source%20code
-         * Inspired by
-         *   https://www.particleincell.com/2013/cubic-line-intersection/
-         * Thanks to Stephan Schmitt and Particle-In-Cell!
-         *
-         * @param poly
-         * @returns
-         */
-        cubicRoots: (poly: number[]) => number[];
-        /**
-         * Compute the Bézier coefficients from the given Bézier point coordinates.
-         *
-         * @param {number} p0 - The start point coordinate.
-         * @param {number} p1 - The start control point coordinate.
-         * @param {number} p2 - The end control point coordinate.
-         * @param {number} p3 - The end point coordinate.
-         * @returns {[number,number,number,number]}
-         */
-        bezierCoeffs: (p0: number, p1: number, p2: number, p3: number) => [number, number, number, number];
-        /**
-         * Calculate the cubic polynomial coefficients used to find the bounding box.
-         *
-         * @param {number} p0 - The start point coordinate.
-         * @param {number} p1 - The start control point coordinate.
-         * @param {number} p2 - The end control point coordinate.
-         * @param {number} p3 - The end point coordinate.
-         * @returns {[number,number,number]}
-         */
-        cubicPoly: (p0: number, p1: number, p2: number, p3: number) => [number, number, number];
-        /**
-         * sign of number, but is division safe: no zero returned :)
-         */
-        sgn(x: number): number;
-    };
-}