plotboilerplate 1.28.0 → 1.28.1

package/src/_esm/src/ts/utils/algorithms/ContourLineDetection.js

@@ -1,362 +0,0 @@
-/**
- * A function to detect contour lines from 3D terrain data.
- *
- * For usage see demo `./demos/48-contour-plot`.
- *
- * @requires detectPaths
- * @requires GenericPath
- * @author   Ikaros Kappler
- * @date     2023-11-05
- * @modified 2023-11-20 Addig path detection on a triangle based grid.
- * @version  1.0.0
- */
-import { Line } from "../../Line";
-import { Vertex } from "../../Vertex";
-import { detectPaths } from "./detectPaths";
-import { clearDuplicateVertices } from "./clearDuplicateVertices";
-export class ContourLineDetection {
-    /**
-     * Creates a new instance for calculating contour lines from the given data grid.
-     * @param {IDataGrid2d<number>} dataGrid - The data grid to use. Must not contain any NaN or null values.
-     * @param {boolean=?} debugMode - (optional) Pass `true` to log warnings on (rare) critical edge cases where the algorithm might fail.
-     */
-    constructor(dataGrid, debugMode) {
-        this.rawLinearPathSegments = [];
-        // Activates/deactivates warning messages on rare edge cases where local path detection fails.
-        this.debugMode = false;
-        this.dataGrid = dataGrid;
-        this.debugMode = Boolean(debugMode);
-    }
-    /**
-     * Detect contour paths from the underlying data source.
-     *
-     * @param {number} criticalHeightValue - The height value. If above data's maximum or below data's minimum then the result will be empty (no intersections).
-     * @param {number} options.closeGapType - `CLOSE_GAP_TYPE_NONE` or `CLOSE_GAP_TYPE_ABOVE` or `CLOSE_GAP_TYPE_BELOW`.
-     * @param {boolean=false} options.useTriangles - If set to true the detection will split each face3 quad into two triangle faces.
-     * @param {pathDetectEpsilon=0.000001} options.pathDetectEpsilon - (optional) The epsilon to tell if two points are located 'in the same place'. Used for connected path detection. If not specified the value `0.0000001` is used.
-     * @param {pointEliminationEpsilon=0.0000001} options.pointEliminationEpsilon - (optional) The epsilon for duplicate point elimination (default is 0.000001).
-     * @param {function?} onRawSegmentsDetected - (optional) Get the interim result of all detected single lines before path detection starts; DO NOT MODIFY the array.
-     * @returns {Array<GenericPath>} - A list of connected paths that resemble the contour lines of the data/terrain at the given height value.
-     */
-    detectContourPaths(criticalHeightValue, options) {
-        var _a, _b;
-        options = options || { closeGapType: ContourLineDetection.CLOSE_GAP_TYPE_NONE };
-        // First: clear the buffer
-        this.rawLinearPathSegments = [];
-        // Imagine a face4 element like this
-        //    (x,y)       (x+1,y)
-        //         A-----B
-        //         |   / |
-        //         | /   |
-        //         D-----C
-        //  (x,y+1)        (x+1,y+1)
-        //	   then result in the buffer will be
-        //   [ [A,B],
-        //     [D,C] ]
-        // Note that the diagonal line (used for triangles) is optional; depends on `options.useTriangles`.
-        const heightFace = [
-            [0, 0],
-            [0, 0]
-        ];
-        for (var y = 0; y + 1 < this.dataGrid.ySegmentCount; y++) {
-            for (var x = 0; x + 1 < this.dataGrid.xSegmentCount; x++) {
-                this.dataGrid.getDataFace4At(x, y, heightFace);
-                this.findHeightFaceIntersectionLines(x, y, heightFace, criticalHeightValue, (_a = options.pointEliminationEpsilon) !== null && _a !== void 0 ? _a : 0.0000001, options.useTriangles);
-            }
-        }
-        // Collect value above/below on the y axis
-        if (options.closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_ABOVE ||
-            options.closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_BELOW) {
-            const xExtremes = [0, this.dataGrid.xSegmentCount - 1];
-            for (var i = 0; i < xExtremes.length; i++) {
-                const x = xExtremes[i];
-                for (var y = 0; y + 1 < this.dataGrid.ySegmentCount; y++) {
-                    const nextX = x;
-                    const nextY = y + 1;
-                    this.detectAboveBelowLerpSegment(x, y, nextX, nextY, criticalHeightValue, options.closeGapType);
-                }
-            }
-            const yExtremes = [0, this.dataGrid.ySegmentCount - 1];
-            for (var j = 0; j < yExtremes.length; j++) {
-                var y = yExtremes[j];
-                for (var x = 0; x + 1 < this.dataGrid.xSegmentCount; x++) {
-                    const nextX = x + 1;
-                    const nextY = y;
-                    this.detectAboveBelowLerpSegment(x, y, nextX, nextY, criticalHeightValue, options.closeGapType);
-                }
-            }
-        }
-        if (options.onRawSegmentsDetected) {
-            options.onRawSegmentsDetected(this.rawLinearPathSegments);
-        }
-        // Detect connected paths
-        let pathSegments = detectPaths(this.rawLinearPathSegments, (_b = options.pathDetectEpsilon) !== null && _b !== void 0 ? _b : 0.0000001); // Epsilon
-        // Filter out segments with only a single line of length~=0
-        pathSegments = pathSegments.filter(function (pathSegment) {
-            return (pathSegment.segments.length != 1 ||
-                (pathSegment.segments.length === 1 && pathSegment.segments[0].length() > 0.1));
-        });
-        return pathSegments;
-    }
-    /**
-     * This function will calculate a single intersecion line of the given face4 data
-     * segment. If the given face does not intersect with the plane at the given `heightValue`
-     * then no segments will be stored.
-     *
-     * @param {number} xIndex - The x position (index) of the data face.
-     * @param {number} yIndex - The y position (index) of the data face.
-     * @param {[[number,number],[number,number]]} heightFace - The data sample that composes the face4 as a two-dimensional number array.
-     * @param {number} heightValue - The height value of the intersection plane to check for.
-     * @returns {Line|null}
-     */
-    findHeight4FaceIntersectionLine(xIndex, yIndex, heightFace, heightValue, pointEliminationEpsilon) {
-        const heightValueA = heightFace[0][0]; // value at (x,y)
-        const heightValueB = heightFace[1][0];
-        const heightValueC = heightFace[1][1];
-        const heightValueD = heightFace[0][1];
-        if (heightValueA === null || heightValueB === null || heightValueC === null || heightValueD === null) {
-            throw `[findHeightFace4IntersectionLine] Cannot extract data face at (${xIndex},${yIndex}). Some values are null.`;
-        }
-        let points = [];
-        // Case A: use full quad face
-        if (this.isBetween(heightValueA, heightValueB, heightValue)) {
-            const lerpValueByHeight = this.getLerpRatio(heightValueA, heightValueB, heightValue);
-            points.push(new Vertex(this.lerp(xIndex, xIndex + 1, lerpValueByHeight), yIndex));
-        }
-        if (this.isBetween(heightValueB, heightValueC, heightValue)) {
-            const lerpValueByHeight = this.getLerpRatio(heightValueB, heightValueC, heightValue);
-            points.push(new Vertex(xIndex + 1, this.lerp(yIndex, yIndex + 1, lerpValueByHeight)));
-        }
-        if (this.isBetween(heightValueC, heightValueD, heightValue)) {
-            const lerpValueByHeight = this.getLerpRatio(heightValueC, heightValueD, heightValue);
-            points.push(new Vertex(this.lerp(xIndex + 1, xIndex, lerpValueByHeight), yIndex + 1));
-        }
-        if (this.isBetween(heightValueD, heightValueA, heightValue)) {
-            const lerpValueByHeight = this.getLerpRatio(heightValueD, heightValueA, heightValue);
-            points.push(new Vertex(xIndex, this.lerp(yIndex + 1, yIndex, lerpValueByHeight)));
-        }
-        // Warning: if a plane intersection point is located EXACTLY on the corner
-        // edge of a face, then the two adjacent edges will result in 2x the same
-        // intersecion point. This must be handled as one, so filter the point list
-        // by an epsilon.
-        points = clearDuplicateVertices(points, pointEliminationEpsilon); // 0.000001);
-        if (points.length >= 2) {
-            const startPoint = points[0];
-            const endPoint = points[1];
-            if (this.debugMode && points.length > 2) {
-                console.warn("[findHeightFace4IntersectionLine] Detected more than 2 points on one face whre only 0 or 2 should appear. At ", xIndex, yIndex, points);
-            }
-            return new Line(startPoint, endPoint);
-        }
-        else {
-            if (this.debugMode && points.length === 1) {
-                console.warn("[findHeightFace4IntersectionLine] Point list has only one point (should not happen).");
-            }
-            return null;
-        }
-    }
-    /**
-     * This function will calculate a single intersecion line of the given face4 data
-     * segment. If the given face does not intersect with the plane at the given `heightValue`
-     * then no segments will be stored.
-     *
-     * @param {number} xIndex - The x position (index) of the data face.
-     * @param {number} yIndex - The y position (index) of the data face.
-     * @param {[[number,number],[number,number]]} heightFace - The data sample that composes the face4 as a two-dimensional number array.
-     * @param {number} heightValue - The height value of the intersection plane to check for.
-     * @returns {Line|null}
-     */
-    findHeightFaceIntersectionLines(xIndex, yIndex, heightFace, criticalHeightValue, pointEliminationEpsilon, useTriangles) {
-        // Imagine a face4 element like this
-        //    (x,y)       (x+1,y)
-        //         A-----B
-        //         |   / |
-        //         | /   |
-        //         D-----C
-        //  (x,y+1)        (x+1,y+1)
-        //	   then result in the buffer will be
-        //   [ [A,B],
-        //     [D,C] ]
-        if (useTriangles) {
-            const lineA = this.findHeighteFace3IntersectionLine(xIndex, yIndex, xIndex, yIndex + 1, xIndex + 1, yIndex, [heightFace[0][0], heightFace[0][1], heightFace[1][0]], criticalHeightValue, pointEliminationEpsilon);
-            if (lineA) {
-                this.rawLinearPathSegments.push(lineA);
-            }
-            const lineB = this.findHeighteFace3IntersectionLine(xIndex, yIndex + 1, xIndex + 1, yIndex + 1, xIndex + 1, yIndex, [heightFace[0][1], heightFace[1][1], heightFace[1][0]], criticalHeightValue, pointEliminationEpsilon);
-            if (lineB) {
-                this.rawLinearPathSegments.push(lineB);
-            }
-        }
-        else {
-            const line = this.findHeight4FaceIntersectionLine(xIndex, yIndex, heightFace, criticalHeightValue, pointEliminationEpsilon);
-            if (line) {
-                this.rawLinearPathSegments.push(line);
-            }
-        }
-    }
-    /**
-     * This function will calculate a single intersecion line of the given face3 data
-     * segment. If the given face does not intersect with the plane at the given `heightValue`
-     * then no segments will be stored.
-     *
-     * @param {number} xIndexA - The x position (index) of the first triangle data point.
-     * @param {number} yIndexA - The y position (index) of the first triangle data point.
-     * @param {[[number,number],[number,number]]} heightFace - The data sample that composes the face4 as a two-dimensional number array.
-     * @param {number} heightValue - The height value of the intersection plane to check for.
-     * @returns {Line|null}
-     */
-    findHeighteFace3IntersectionLine(xIndexA, yIndexA, xIndexB, yIndexB, xIndexC, yIndexC, heightFace, heightValue, pointEliminationEpsilon) {
-        const heightValueA = heightFace[0]; // value at (x,y)
-        const heightValueB = heightFace[1];
-        const heightValueC = heightFace[2];
-        if (heightValueA === null || heightValueB === null || heightValueC === null) {
-            throw `[findHeightFace3IntersectionLine] Cannot extract data face at (${xIndexA},${yIndexA}). Some values are null.`;
-        }
-        let points = [];
-        // Case A: use full quad face
-        if (this.isBetween(heightValueA, heightValueB, heightValue)) {
-            const lerpValueByHeight = this.getLerpRatio(heightValueA, heightValueB, heightValue);
-            points.push(new Vertex(this.lerp(xIndexA, xIndexB, lerpValueByHeight), this.lerp(yIndexA, yIndexB, lerpValueByHeight)));
-        }
-        if (this.isBetween(heightValueB, heightValueC, heightValue)) {
-            const lerpValueByHeight = this.getLerpRatio(heightValueB, heightValueC, heightValue);
-            // points.push(new Vertex(xIndex + 1, this.lerp(yIndex, yIndex + 1, lerpValueByHeight)));
-            points.push(new Vertex(this.lerp(xIndexB, xIndexC, lerpValueByHeight), this.lerp(yIndexB, yIndexC, lerpValueByHeight)));
-        }
-        if (this.isBetween(heightValueC, heightValueA, heightValue)) {
-            const lerpValueByHeight = this.getLerpRatio(heightValueC, heightValueA, heightValue);
-            // points.push(new Vertex(this.lerp(xIndex + 1, xIndex, lerpValueByHeight), yIndex + 1));
-            points.push(new Vertex(this.lerp(xIndexC, xIndexA, lerpValueByHeight), this.lerp(yIndexC, yIndexA, lerpValueByHeight)));
-        }
-        // Warning: if a plane intersection point is located EXACTLY on the corner
-        // edge of a face, then the two adjacent edges will result in 2x the same
-        // intersecion point. This must be handled as one, so filter the point list
-        // by an epsilon.
-        points = clearDuplicateVertices(points, pointEliminationEpsilon); // 0.0000001);
-        if (points.length >= 2) {
-            const startPoint = points[0];
-            const endPoint = points[1];
-            if (this.debugMode && points.length > 2) {
-                console.warn("[findHeightFace3IntersectionLine] Detected more than 2 points on one face whre only 0 or 2 should appear. At ", xIndexA, yIndexA, points);
-            }
-            return new Line(startPoint, endPoint);
-        }
-        else {
-            if (this.debugMode && points.length === 1) {
-                console.warn("[findHeightFace3IntersectionLine] Point list has only one point (should not happen).");
-            }
-            return null;
-        }
-    }
-    /**
-     * This procedure will look at the face4 at the ((x,y),(nextX,nextY)) position – which are four values –
-     * and determines the local contour lines for these cases.
-     *
-     * This is used to detect and calculate edge cases on the borders of the underliying height data:
-     *  * left and right border (x=0, x=data.xSegmentCount)
-     *  * top and bottom border (x=y, x=data.ySegmentCount)
-     *
-     * Resulting path segments will be stored in the global `rawLinearPathSegments` array for further processing.
-     *
-     * @param {number} x
-     * @param {number} y
-     * @param {number} nextX
-     * @param {number} nextY
-     * @param {number} criticalHeightValue
-     * @param {number} closeGapType - CLOSE_GAP_TYPE_ABOVE or CLOSE_GAP_TYPE_BELOW.
-     * @return {void}
-     */
-    detectAboveBelowLerpSegment(x, y, nextX, nextY, criticalHeightValue, closeGapType) {
-        const heightValueA = this.dataGrid.getDataValueAt(x, y);
-        const heightValueB = this.dataGrid.getDataValueAt(nextX, nextY);
-        //   if (heightValueA >= criticalHeightValue && heightValueB >= criticalHeightValue) {
-        if (this.areBothValuesOnRequiredPlaneSide(heightValueA, heightValueB, criticalHeightValue, closeGapType)) {
-            //  Both above
-            const line = new Line(new Vertex(x, y), new Vertex(nextX, nextY));
-            this.rawLinearPathSegments.push(line);
-        }
-        else if ((closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_ABOVE &&
-            heightValueA >= criticalHeightValue &&
-            heightValueB <= criticalHeightValue) ||
-            (closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_BELOW &&
-                heightValueA <= criticalHeightValue &&
-                heightValueB >= criticalHeightValue)) {
-            // Only one of both (first) is above -> interpolate to find exact intersection point
-            const lerpValueByHeight = this.getLerpRatio(heightValueA, heightValueB, criticalHeightValue);
-            const interpLine = new Line(new Vertex(x, y), new Vertex(this.lerp(x, nextX, lerpValueByHeight), this.lerp(y, nextY, lerpValueByHeight)));
-            this.rawLinearPathSegments.push(interpLine);
-        }
-        else if ((closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_ABOVE &&
-            heightValueA <= criticalHeightValue &&
-            heightValueB >= criticalHeightValue) ||
-            (closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_BELOW &&
-                heightValueA >= criticalHeightValue &&
-                heightValueB <= criticalHeightValue)) {
-            // Only one of both (second) is above -> interpolate to find exact intersection point
-            const lerpValueByHeight = this.getLerpRatio(heightValueA, heightValueB, criticalHeightValue);
-            const interpLine = new Line(new Vertex(this.lerp(x, nextX, lerpValueByHeight), this.lerp(y, nextY, lerpValueByHeight)), new Vertex(nextX, nextY));
-            this.rawLinearPathSegments.push(interpLine);
-        }
-    }
-    /**
-     * Checks if both value are on the same side of the critical value (above or below). The `closeGapType`
-     * indictes if `CLOSE_GAP_TYPE_BELOW` or `CLOSE_GAP_TYPE_ABOVE` should be used as a rule.
-     *
-     * @param {number} valueA
-     * @param {number} valueB
-     * @param {number} criticalValue
-     * @param {number} closeGapType
-     * @returns {boolean}
-     */
-    areBothValuesOnRequiredPlaneSide(valueA, valueB, criticalValue, closeGapType) {
-        return ((closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_BELOW && valueA <= criticalValue && valueB <= criticalValue) ||
-            (closeGapType == ContourLineDetection.CLOSE_GAP_TYPE_ABOVE && valueA >= criticalValue && valueB >= criticalValue));
-    }
-    /**
-     * Test if a given numeric value (`curValue`) is between the given values `valA` and `valB`.
-     * Value A and B don't need to be in ascending order, so `valA <= curValue <= valB` and `valB <= curvalue <= valA`
-     * will do the job.
-     *
-     * @param {number} valA - The first of the two bounds.
-     * @param {number} valB - The second of the two bounds.
-     * @param {number} curValue - The value to check if it is between (or equal) to the given bounds.
-     * @returns {boolean}
-     */
-    isBetween(valA, valB, curValue) {
-        return (valA <= curValue && curValue <= valB) || (valB <= curValue && curValue <= valA);
-    }
-    /**
-     * Get a 'lerp' value - which is some sort of percentage/ratio for the `curValue` inside the
-     * range of the given interval `[valA ... valB]`.
-     *
-     * Examples:
-     *  * getLerpRatio(0,100,50) === 0.5
-     *  * getLerpRatio(50,100,75) === 0.5
-     *  * getLerpRatio(0,100,0) === 0.0
-     *  * getLerpRatio(0,100,100) === 1.0
-     *  * getLerpRatio(0,100,-50) === -0.5
-     *
-     * @param {number} valA
-     * @param {number} valB
-     * @param {number} curValue
-     * @returns
-     */
-    getLerpRatio(valA, valB, curValue) {
-        return (curValue - valA) / (valB - valA);
-    }
-    /**
-     * Helper function to lerp a numeric value.
-     *
-     * @param {number} min - The min (start) value. Doesn't necesarily need to be the smaller one.
-     * @param {number} max - The max (end) value. Doesn't necesarily need to be the larger one.
-     * @param {number} ratio - The lerp ratio; usually a value between 0.0 and 1.0, but other values a valid for linear interpolation, too.
-     * @returns {number}
-     */
-    lerp(min, max, ratio) {
-        return min + (max - min) * ratio;
-    }
-}
-ContourLineDetection.CLOSE_GAP_TYPE_NONE = 0;
-ContourLineDetection.CLOSE_GAP_TYPE_ABOVE = 1;
-ContourLineDetection.CLOSE_GAP_TYPE_BELOW = 2;
-//# sourceMappingURL=ContourLineDetection.js.map

package/src/_esm/src/ts/utils/algorithms/ContourLineDetection.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"ContourLineDetection.js","sourceRoot":"","sources":["../../../../../ts/utils/algorithms/ContourLineDetection.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;GAWG;AAEH,OAAO,EAAE,IAAI,EAAE,MAAM,YAAY,CAAC;AAClC,OAAO,EAAE,MAAM,EAAE,MAAM,cAAc,CAAC;AAEtC,OAAO,EAAE,WAAW,EAAE,MAAM,eAAe,CAAC;AAC5C,OAAO,EAAE,sBAAsB,EAAE,MAAM,0BAA0B,CAAC;AAQlE,MAAM,OAAO,oBAAoB;IAY/B;;;;OAIG;IACH,YAAY,QAA6B,EAAE,SAAmB;QAdtD,0BAAqB,GAAgB,EAAE,CAAC;QAMhD,8FAA8F;QACvF,cAAS,GAAY,KAAK,CAAC;QAQhC,IAAI,CAAC,QAAQ,GAAG,QAAQ,CAAC;QACzB,IAAI,CAAC,SAAS,GAAG,OAAO,CAAC,SAAS,CAAC,CAAC;IACtC,CAAC;IAED;;;;;;;;;;OAUG;IACH,kBAAkB,CAChB,mBAA2B,EAC3B,OAMC;;QAED,OAAO,GAAG,OAAO,IAAI,EAAE,YAAY,EAAE,oBAAoB,CAAC,mBAAmB,EAAE,CAAC;QAEhF,0BAA0B;QAC1B,IAAI,CAAC,qBAAqB,GAAG,EAAE,CAAC;QAEhC,oCAAoC;QACpC,yBAAyB;QACzB,kBAAkB;QAClB,kBAAkB;QAClB,kBAAkB;QAClB,kBAAkB;QAClB,4BAA4B;QAC5B,uCAAuC;QACvC,aAAa;QACb,cAAc;QACd,mGAAmG;QACnG,MAAM,UAAU,GAA0B;YACxC,CAAC,CAAC,EAAE,CAAC,CAAC;YACN,CAAC,CAAC,EAAE,CAAC,CAAC;SACP,CAAC;QACF,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAG,IAAI,CAAC,QAAQ,CAAC,aAAa,EAAE,CAAC,EAAE,EAAE,CAAC;YACzD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAG,IAAI,CAAC,QAAQ,CAAC,aAAa,EAAE,CAAC,EAAE,EAAE,CAAC;gBACzD,IAAI,CAAC,QAAQ,CAAC,cAAc,CAAC,CAAC,EAAE,CAAC,EAAE,UAAU,CAAC,CAAC;gBAC/C,IAAI,CAAC,+BAA+B,CAClC,CAAC,EACD,CAAC,EACD,UAAU,EACV,mBAAmB,QACnB,OAAO,CAAC,uBAAuB,mCAAI,SAAS,EAC5C,OAAO,CAAC,YAAY,CACrB,CAAC;YACJ,CAAC;QACH,CAAC;QAED,0CAA0C;QAC1C,IACE,OAAO,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB;YACjE,OAAO,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB,EACjE,CAAC;YACD,MAAM,SAAS,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,QAAQ,CAAC,aAAa,GAAG,CAAC,CAAC,CAAC;YACvD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,SAAS,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBAC1C,MAAM,CAAC,GAAG,SAAS,CAAC,CAAC,CAAC,CAAC;gBACvB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAG,IAAI,CAAC,QAAQ,CAAC,aAAa,EAAE,CAAC,EAAE,EAAE,CAAC;oBACzD,MAAM,KAAK,GAAG,CAAC,CAAC;oBAChB,MAAM,KAAK,GAAG,CAAC,GAAG,CAAC,CAAC;oBACpB,IAAI,CAAC,2BAA2B,CAAC,CAAC,EAAE,CAAC,EAAE,KAAK,EAAE,KAAK,EAAE,mBAAmB,EAAE,OAAO,CAAC,YAAY,CAAC,CAAC;gBAClG,CAAC;YACH,CAAC;YACD,MAAM,SAAS,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,QAAQ,CAAC,aAAa,GAAG,CAAC,CAAC,CAAC;YACvD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,SAAS,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBAC1C,IAAI,CAAC,GAAG,SAAS,CAAC,CAAC,CAAC,CAAC;gBACrB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAG,IAAI,CAAC,QAAQ,CAAC,aAAa,EAAE,CAAC,EAAE,EAAE,CAAC;oBACzD,MAAM,KAAK,GAAG,CAAC,GAAG,CAAC,CAAC;oBACpB,MAAM,KAAK,GAAG,CAAC,CAAC;oBAChB,IAAI,CAAC,2BAA2B,CAAC,CAAC,EAAE,CAAC,EAAE,KAAK,EAAE,KAAK,EAAE,mBAAmB,EAAE,OAAO,CAAC,YAAY,CAAC,CAAC;gBAClG,CAAC;YACH,CAAC;QACH,CAAC;QAED,IAAI,OAAO,CAAC,qBAAqB,EAAE,CAAC;YAClC,OAAO,CAAC,qBAAqB,CAAC,IAAI,CAAC,qBAAqB,CAAC,CAAC;QAC5D,CAAC;QAED,yBAAyB;QACzB,IAAI,YAAY,GAAuB,WAAW,CAAC,IAAI,CAAC,qBAAqB,QAAE,OAAO,CAAC,iBAAiB,mCAAI,SAAS,CAAC,CAAC,CAAC,UAAU;QAClI,2DAA2D;QAC3D,YAAY,GAAG,YAAY,CAAC,MAAM,CAAC,UAAU,WAAW;YACtD,OAAO,CACL,WAAW,CAAC,QAAQ,CAAC,MAAM,IAAI,CAAC;gBAChC,CAAC,WAAW,CAAC,QAAQ,CAAC,MAAM,KAAK,CAAC,IAAK,WAAW,CAAC,QAAQ,CAAC,CAAC,CAAU,CAAC,MAAM,EAAE,GAAG,GAAG,CAAC,CACxF,CAAC;QACJ,CAAC,CAAC,CAAC;QACH,OAAO,YAAY,CAAC;IACtB,CAAC;IAED;;;;;;;;;;OAUG;IACK,+BAA+B,CACrC,MAAc,EACd,MAAc,EACd,UAAiC,EACjC,WAAmB,EACnB,uBAA+B;QAE/B,MAAM,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,iBAAiB;QACxD,MAAM,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;QACtC,MAAM,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;QACtC,MAAM,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;QAEtC,IAAI,YAAY,KAAK,IAAI,IAAI,YAAY,KAAK,IAAI,IAAI,YAAY,KAAK,IAAI,IAAI,YAAY,KAAK,IAAI,EAAE,CAAC;YACrG,MAAM,kEAAkE,MAAM,IAAI,MAAM,0BAA0B,CAAC;QACrH,CAAC;QAED,IAAI,MAAM,GAAkB,EAAE,CAAC;QAE/B,6BAA6B;QAC7B,IAAI,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,EAAE,CAAC;YAC5D,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,CAAC;YACrF,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,IAAI,CAAC,IAAI,CAAC,MAAM,EAAE,MAAM,GAAG,CAAC,EAAE,iBAAiB,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;QACpF,CAAC;QACD,IAAI,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,EAAE,CAAC;YAC5D,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,CAAC;YACrF,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,IAAI,CAAC,IAAI,CAAC,MAAM,EAAE,MAAM,GAAG,CAAC,EAAE,iBAAiB,CAAC,CAAC,CAAC,CAAC;QACxF,CAAC;QACD,IAAI,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,EAAE,CAAC;YAC5D,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,CAAC;YACrF,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,IAAI,CAAC,IAAI,CAAC,MAAM,GAAG,CAAC,EAAE,MAAM,EAAE,iBAAiB,CAAC,EAAE,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC;QACxF,CAAC;QACD,IAAI,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,EAAE,CAAC;YAC5D,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,CAAC;YACrF,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,MAAM,EAAE,IAAI,CAAC,IAAI,CAAC,MAAM,GAAG,CAAC,EAAE,MAAM,EAAE,iBAAiB,CAAC,CAAC,CAAC,CAAC;QACpF,CAAC;QAED,0EAA0E;QAC1E,yEAAyE;QACzE,2EAA2E;QAC3E,iBAAiB;QACjB,MAAM,GAAG,sBAAsB,CAAC,MAAM,EAAE,uBAAuB,CAAC,CAAC,CAAC,aAAa;QAE/E,IAAI,MAAM,CAAC,MAAM,IAAI,CAAC,EAAE,CAAC;YACvB,MAAM,UAAU,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;YAC7B,MAAM,QAAQ,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;YAC3B,IAAI,IAAI,CAAC,SAAS,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;gBACxC,OAAO,CAAC,IAAI,CACV,+GAA+G,EAC/G,MAAM,EACN,MAAM,EACN,MAAM,CACP,CAAC;YACJ,CAAC;YACD,OAAO,IAAI,IAAI,CAAC,UAAU,EAAE,QAAQ,CAAC,CAAC;QACxC,CAAC;aAAM,CAAC;YACN,IAAI,IAAI,CAAC,SAAS,IAAI,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;gBAC1C,OAAO,CAAC,IAAI,CAAC,sFAAsF,CAAC,CAAC;YACvG,CAAC;YACD,OAAO,IAAI,CAAC;QACd,CAAC;IACH,CAAC;IAED;;;;;;;;;;OAUG;IACK,+BAA+B,CACrC,MAAc,EACd,MAAc,EACd,UAAiC,EACjC,mBAA2B,EAC3B,uBAA+B,EAC/B,YAAsB;QAEtB,oCAAoC;QACpC,yBAAyB;QACzB,kBAAkB;QAClB,kBAAkB;QAClB,kBAAkB;QAClB,kBAAkB;QAClB,4BAA4B;QAC5B,uCAAuC;QACvC,aAAa;QACb,cAAc;QACd,IAAI,YAAY,EAAE,CAAC;YACjB,MAAM,KAAK,GAAG,IAAI,CAAC,gCAAgC,CACjD,MAAM,EACN,MAAM,EACN,MAAM,EACN,MAAM,GAAG,CAAC,EACV,MAAM,GAAG,CAAC,EACV,MAAM,EACN,CAAC,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EACtD,mBAAmB,EACnB,uBAAuB,CACxB,CAAC;YACF,IAAI,KAAK,EAAE,CAAC;gBACV,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC;YACzC,CAAC;YACD,MAAM,KAAK,GAAG,IAAI,CAAC,gCAAgC,CACjD,MAAM,EACN,MAAM,GAAG,CAAC,EACV,MAAM,GAAG,CAAC,EACV,MAAM,GAAG,CAAC,EACV,MAAM,GAAG,CAAC,EACV,MAAM,EACN,CAAC,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,EACtD,mBAAmB,EACnB,uBAAuB,CACxB,CAAC;YACF,IAAI,KAAK,EAAE,CAAC;gBACV,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,KAAK,CAAC,CAAC;YACzC,CAAC;QACH,CAAC;aAAM,CAAC;YACN,MAAM,IAAI,GAAG,IAAI,CAAC,+BAA+B,CAAC,MAAM,EAAE,MAAM,EAAE,UAAU,EAAE,mBAAmB,EAAE,uBAAuB,CAAC,CAAC;YAC5H,IAAI,IAAI,EAAE,CAAC;gBACT,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;YACxC,CAAC;QACH,CAAC;IACH,CAAC;IAED;;;;;;;;;;OAUG;IACK,gCAAgC,CACtC,OAAe,EACf,OAAe,EACf,OAAe,EACf,OAAe,EACf,OAAe,EACf,OAAe,EACf,UAAiC,EACjC,WAAmB,EACnB,uBAA+B;QAE/B,MAAM,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC,CAAC,iBAAiB;QACrD,MAAM,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC;QACnC,MAAM,YAAY,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC;QAEnC,IAAI,YAAY,KAAK,IAAI,IAAI,YAAY,KAAK,IAAI,IAAI,YAAY,KAAK,IAAI,EAAE,CAAC;YAC5E,MAAM,kEAAkE,OAAO,IAAI,OAAO,0BAA0B,CAAC;QACvH,CAAC;QAED,IAAI,MAAM,GAAkB,EAAE,CAAC;QAE/B,6BAA6B;QAC7B,IAAI,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,EAAE,CAAC;YAC5D,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,CAAC;YACrF,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,OAAO,EAAE,iBAAiB,CAAC,EAAE,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,OAAO,EAAE,iBAAiB,CAAC,CAAC,CAAC,CAAC;QAC1H,CAAC;QACD,IAAI,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,EAAE,CAAC;YAC5D,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,CAAC;YACrF,yFAAyF;YACzF,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,OAAO,EAAE,iBAAiB,CAAC,EAAE,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,OAAO,EAAE,iBAAiB,CAAC,CAAC,CAAC,CAAC;QAC1H,CAAC;QACD,IAAI,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,EAAE,CAAC;YAC5D,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,WAAW,CAAC,CAAC;YACrF,yFAAyF;YACzF,MAAM,CAAC,IAAI,CAAC,IAAI,MAAM,CAAC,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,OAAO,EAAE,iBAAiB,CAAC,EAAE,IAAI,CAAC,IAAI,CAAC,OAAO,EAAE,OAAO,EAAE,iBAAiB,CAAC,CAAC,CAAC,CAAC;QAC1H,CAAC;QAED,0EAA0E;QAC1E,yEAAyE;QACzE,2EAA2E;QAC3E,iBAAiB;QACjB,MAAM,GAAG,sBAAsB,CAAC,MAAM,EAAE,uBAAuB,CAAC,CAAC,CAAC,cAAc;QAEhF,IAAI,MAAM,CAAC,MAAM,IAAI,CAAC,EAAE,CAAC;YACvB,MAAM,UAAU,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;YAC7B,MAAM,QAAQ,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;YAC3B,IAAI,IAAI,CAAC,SAAS,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;gBACxC,OAAO,CAAC,IAAI,CACV,+GAA+G,EAC/G,OAAO,EACP,OAAO,EACP,MAAM,CACP,CAAC;YACJ,CAAC;YACD,OAAO,IAAI,IAAI,CAAC,UAAU,EAAE,QAAQ,CAAC,CAAC;QACxC,CAAC;aAAM,CAAC;YACN,IAAI,IAAI,CAAC,SAAS,IAAI,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;gBAC1C,OAAO,CAAC,IAAI,CAAC,sFAAsF,CAAC,CAAC;YACvG,CAAC;YACD,OAAO,IAAI,CAAC;QACd,CAAC;IACH,CAAC;IAED;;;;;;;;;;;;;;;;;OAiBG;IACH,2BAA2B,CACzB,CAAS,EACT,CAAS,EACT,KAAa,EACb,KAAa,EACb,mBAA2B,EAC3B,YAAoB;QAEpB,MAAM,YAAY,GAAG,IAAI,CAAC,QAAQ,CAAC,cAAc,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC;QACxD,MAAM,YAAY,GAAG,IAAI,CAAC,QAAQ,CAAC,cAAc,CAAC,KAAK,EAAE,KAAK,CAAC,CAAC;QAChE,sFAAsF;QACtF,IAAI,IAAI,CAAC,gCAAgC,CAAC,YAAY,EAAE,YAAY,EAAE,mBAAmB,EAAE,YAAY,CAAC,EAAE,CAAC;YACzG,cAAc;YACd,MAAM,IAAI,GAAG,IAAI,IAAI,CAAC,IAAI,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,EAAE,IAAI,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,CAAC,CAAC;YAClE,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;QACxC,CAAC;aAAM,IACL,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB;YACxD,YAAY,IAAI,mBAAmB;YACnC,YAAY,IAAI,mBAAmB,CAAC;YACtC,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB;gBACxD,YAAY,IAAI,mBAAmB;gBACnC,YAAY,IAAI,mBAAmB,CAAC,EACtC,CAAC;YACD,oFAAoF;YACpF,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,mBAAmB,CAAC,CAAC;YAC7F,MAAM,UAAU,GAAG,IAAI,IAAI,CACzB,IAAI,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,EAChB,IAAI,MAAM,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,EAAE,KAAK,EAAE,iBAAiB,CAAC,EAAE,IAAI,CAAC,IAAI,CAAC,CAAC,EAAE,KAAK,EAAE,iBAAiB,CAAC,CAAC,CAC3F,CAAC;YACF,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,UAAU,CAAC,CAAC;QAC9C,CAAC;aAAM,IACL,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB;YACxD,YAAY,IAAI,mBAAmB;YACnC,YAAY,IAAI,mBAAmB,CAAC;YACtC,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB;gBACxD,YAAY,IAAI,mBAAmB;gBACnC,YAAY,IAAI,mBAAmB,CAAC,EACtC,CAAC;YACD,qFAAqF;YACrF,MAAM,iBAAiB,GAAG,IAAI,CAAC,YAAY,CAAC,YAAY,EAAE,YAAY,EAAE,mBAAmB,CAAC,CAAC;YAC7F,MAAM,UAAU,GAAG,IAAI,IAAI,CACzB,IAAI,MAAM,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,EAAE,KAAK,EAAE,iBAAiB,CAAC,EAAE,IAAI,CAAC,IAAI,CAAC,CAAC,EAAE,KAAK,EAAE,iBAAiB,CAAC,CAAC,EAC1F,IAAI,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,CACzB,CAAC;YACF,IAAI,CAAC,qBAAqB,CAAC,IAAI,CAAC,UAAU,CAAC,CAAC;QAC9C,CAAC;IACH,CAAC;IAED;;;;;;;;;OASG;IACK,gCAAgC,CAAC,MAAc,EAAE,MAAc,EAAE,aAAqB,EAAE,YAAoB;QAClH,OAAO,CACL,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB,IAAI,MAAM,IAAI,aAAa,IAAI,MAAM,IAAI,aAAa,CAAC;YACjH,CAAC,YAAY,IAAI,oBAAoB,CAAC,oBAAoB,IAAI,MAAM,IAAI,aAAa,IAAI,MAAM,IAAI,aAAa,CAAC,CAClH,CAAC;IACJ,CAAC;IAED;;;;;;;;;OASG;IACK,SAAS,CAAC,IAAY,EAAE,IAAY,EAAE,QAAgB;QAC5D,OAAO,CAAC,IAAI,IAAI,QAAQ,IAAI,QAAQ,IAAI,IAAI,CAAC,IAAI,CAAC,IAAI,IAAI,QAAQ,IAAI,QAAQ,IAAI,IAAI,CAAC,CAAC;IAC1F,CAAC;IAED;;;;;;;;;;;;;;;OAeG;IACK,YAAY,CAAC,IAAY,EAAE,IAAY,EAAE,QAAgB;QAC/D,OAAO,CAAC,QAAQ,GAAG,IAAI,CAAC,GAAG,CAAC,IAAI,GAAG,IAAI,CAAC,CAAC;IAC3C,CAAC;IAED;;;;;;;OAOG;IACK,IAAI,CAAC,GAAW,EAAE,GAAW,EAAE,KAAa;QAClD,OAAO,GAAG,GAAG,CAAC,GAAG,GAAG,GAAG,CAAC,GAAG,KAAK,CAAC;IACnC,CAAC;CACF;AAtcQ,wCAAmB,GAAG,CAAC,AAAJ,CAAK;AACxB,yCAAoB,GAAG,CAAC,AAAJ,CAAK;AACzB,yCAAoB,GAAG,CAAC,AAAJ,CAAK"}

package/src/_esm/src/ts/utils/algorithms/CubicSplinePath.d.ts

@@ -1,63 +0,0 @@
-/**
- * @author   Ikaros Kappler (ported from basic script to class).
- * @date     2020-04-15
- * @modified 2020-08-19 Ported this class from vanilla JS to TypeScript.
- * @version  1.0.0
- *
- * @file CubicSplinePath
- * @public
- **/
-import { CubicBezierCurve } from "../../CubicBezierCurve";
-import { Vertex } from "../../Vertex";
-interface IControlCoords {
-    start: Array<number>;
-    end: Array<number>;
-}
-/**
- * @classdesc Compute a natural cubic Bézier spline path from a given sequence of points/vertices.
- *
- * Inspired by http://weitz.de/hobby/
- *
- * @requires CubicBezierCurve
- * @requires HobbyPath
- * @requires Vertex
- */
-export declare class CubicSplinePath {
-    /**
-     * @member {Array<Vertex>} vertices
-     * @memberof CatmullRomPath
-     * @type {Array<Vertex>}
-     * @instance
-     **/
-    private vertices;
-    /**
-     * @constructor
-     * @name CubicSplinePath
-     * @param {Array<Vertex>=} vertices? - An optional array of vertices to initialize the path with.
-     **/
-    constructor(vertices?: Array<Vertex>);
-    /**
-    * Add a new point to the end of the vertex sequence.
-    *
-    * @name addPoint
-    * @memberof CubicSplinePath
-    * @instance
-    * @param {Vertex} p - The vertex (point) to add.
-    **/
-    addPoint(p: Vertex): void;
-    /**
-     * Generate a sequence of cubic Bézier curves from the point set.
-     *
-     * @name generateCurve
-     * @memberof CubicSplinePath
-     * @instance
-     * @param {boolean=} circular - Specify if the path should be closed.
-     * @return Array<CubicBezierCurve>
-     **/
-    generateCurve(circular?: boolean): Array<CubicBezierCurve>;
-    static utils: {
-        naturalControlsClosed: (coords: Array<number>) => IControlCoords;
-        naturalControlsOpen: (coords: Array<number>) => IControlCoords;
-    };
-}
-export {};

package/src/_esm/src/ts/utils/algorithms/CubicSplinePath.js

@@ -1,170 +0,0 @@
-/**
- * @author   Ikaros Kappler (ported from basic script to class).
- * @date     2020-04-15
- * @modified 2020-08-19 Ported this class from vanilla JS to TypeScript.
- * @version  1.0.0
- *
- * @file CubicSplinePath
- * @public
- **/
-import { CubicBezierCurve } from "../../CubicBezierCurve";
-import { HobbyPath } from "./HobbyPath";
-import { Vertex } from "../../Vertex";
-;
-/**
- * @classdesc Compute a natural cubic Bézier spline path from a given sequence of points/vertices.
- *
- * Inspired by http://weitz.de/hobby/
- *
- * @requires CubicBezierCurve
- * @requires HobbyPath
- * @requires Vertex
- */
-export class CubicSplinePath {
-    /**
-     * @constructor
-     * @name CubicSplinePath
-     * @param {Array<Vertex>=} vertices? - An optional array of vertices to initialize the path with.
-     **/
-    constructor(vertices) {
-        this.vertices = vertices ? vertices : [];
-    }
-    ;
-    /**
-    * Add a new point to the end of the vertex sequence.
-    *
-    * @name addPoint
-    * @memberof CubicSplinePath
-    * @instance
-    * @param {Vertex} p - The vertex (point) to add.
-    **/
-    addPoint(p) {
-        this.vertices.push(p);
-    }
-    ;
-    /**
-     * Generate a sequence of cubic Bézier curves from the point set.
-     *
-     * @name generateCurve
-     * @memberof CubicSplinePath
-     * @instance
-     * @param {boolean=} circular - Specify if the path should be closed.
-     * @return Array<CubicBezierCurve>
-     **/
-    generateCurve(circular) {
-        const xs = [];
-        const ys = [];
-        for (var i = 0; i < this.vertices.length; i++) {
-            xs.push(this.vertices[i].x);
-            ys.push(this.vertices[i].y);
-        }
-        const curves = [];
-        let n = this.vertices.length;
-        if (n > 1) {
-            if (n == 2) {
-                // for two points, just draw a straight line
-                curves.push(new CubicBezierCurve(this.vertices[0], this.vertices[1], this.vertices[0], this.vertices[1]));
-            }
-            else {
-                if (!circular) {
-                    // open curve
-                    // x1 and y1 contain the coordinates of the first control
-                    // points, x2 and y2 those of the second
-                    const controlsX = CubicSplinePath.utils.naturalControlsOpen(xs);
-                    const controlsY = CubicSplinePath.utils.naturalControlsOpen(ys);
-                    for (let i = 1; i < n; i++) {
-                        // add Bézier segment - two control points and next node
-                        curves.push(new CubicBezierCurve(this.vertices[i - 1], this.vertices[i], new Vertex(controlsX.start[i - 1], controlsY.start[i - 1]), // x1[i-1], y1[i-1]), // new Vertex(x1[i-1], y1[i-1]),
-                        new Vertex(controlsX.end[i - 1], controlsY.end[i - 1]) // new Vertex(x2[i-1], y2[i-1])
-                        ));
-                    }
-                }
-                else {
-                    // closed curve, i.e. endpoints are connected
-                    // see comments for open curve
-                    let controlsX = CubicSplinePath.utils.naturalControlsClosed(xs);
-                    let controlsY = CubicSplinePath.utils.naturalControlsClosed(ys);
-                    for (let i = 0; i < n; i++) {
-                        // if i is n-1, the "next" point is the first one
-                        let j = (i + 1) % n;
-                        curves.push(new CubicBezierCurve(this.vertices[i], this.vertices[j], new Vertex(controlsX.start[i], controlsY.start[i]), // new Vertex(x1[i], y1[i]),
-                        new Vertex(controlsX.end[i], controlsY.end[i]) // new Vertex(x2[i], y2[i])
-                        ));
-                    }
-                }
-            }
-        }
-        return curves;
-    }
-    ;
-}
-CubicSplinePath.utils = {
-    naturalControlsClosed: (coords) => {
-        const n = coords.length;
-        // a, b, and c are the diagonals of the tridiagonal matrix, d is the
-        // right side
-        const a = new Array(n);
-        const b = new Array(n);
-        const c = new Array(n);
-        const d = new Array(n);
-        // the video explains why the matrix is filled this way
-        b[0] = 4;
-        c[0] = 1;
-        d[0] = 4 * coords[0] + 2 * coords[1];
-        a[n - 1] = 1;
-        b[n - 1] = 4;
-        d[n - 1] = 4 * coords[n - 1] + 2 * coords[0];
-        for (let i = 1; i < n - 1; i++) {
-            a[i] = 1;
-            b[i] = 4;
-            c[i] = 1;
-            d[i] = 4 * coords[i] + 2 * coords[i + 1];
-        }
-        // add a one to the two empty corners and solve the system for the
-        // first control points
-        const x1 = HobbyPath.utils.sherman(a, b, c, d, 1, 1);
-        // compute second controls points from first
-        const x2 = new Array(n);
-        for (let i = 0; i < n - 1; i++)
-            x2[i] = 2 * coords[i + 1] - x1[i + 1];
-        x2[n - 1] = 2 * coords[0] - x1[0];
-        return { start: x1, end: x2 };
-    },
-    // computes two arrays for the first and second controls points for a
-    // natural cubic spline through the points in K, an "open" curve where
-    // the curve doesn't return to the starting point; the function works
-    // with one coordinate at a time, i.e. it has to be called twice
-    naturalControlsOpen: (coords) => {
-        const n = coords.length - 1;
-        // a, b, and c are the diagonals of the tridiagonal matrix, d is the
-        // right side
-        const a = new Array(n);
-        const b = new Array(n);
-        const c = new Array(n);
-        const d = new Array(n);
-        // the video explains why the matrix is filled this way
-        b[0] = 2;
-        c[0] = 1;
-        d[0] = coords[0] + 2 * coords[1];
-        a[n - 1] = 2;
-        b[n - 1] = 7;
-        d[n - 1] = 8 * coords[n - 1] + coords[n];
-        for (let i = 1; i < n - 1; i++) {
-            a[i] = 1;
-            b[i] = 4;
-            c[i] = 1;
-            d[i] = 4 * coords[i] + 2 * coords[i + 1];
-        }
-        // solve the system to get the first control points
-        const x1 = HobbyPath.utils.thomas(a, b, c, d);
-        // compute second controls points from first
-        const x2 = new Array(n);
-        for (let i = 0; i < n - 1; i++) {
-            x2[i] = 2 * coords[i + 1] - x1[i + 1];
-        }
-        x2[n - 1] = (coords[n] + x1[n - 1]) / 2;
-        return { start: x1, end: x2 };
-    }
-}; // END utils
-; // END class
-//# sourceMappingURL=CubicSplinePath.js.map

package/src/_esm/src/ts/utils/algorithms/CubicSplinePath.js.map

@@ -1 +0,0 @@
-{"version":3,"file":"CubicSplinePath.js","sourceRoot":"","sources":["../../../../../ts/utils/algorithms/CubicSplinePath.ts"],"names":[],"mappings":"AAAA;;;;;;;;IAQI;AAEJ,OAAO,EAAE,gBAAgB,EAAE,MAAM,wBAAwB,CAAC;AAC1D,OAAO,EAAE,SAAS,EAAE,MAAM,aAAa,CAAC;AACxC,OAAO,EAAE,MAAM,EAAE,MAAM,cAAc,CAAC;AAKrC,CAAC;AAIF;;;;;;;;GAQG;AACH,MAAM,OAAO,eAAe;IAWxB;;;;QAII;IACJ,YAAa,QAAwB;QACxC,IAAI,CAAC,QAAQ,GAAG,QAAQ,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,CAAC;IACtC,CAAC;IAAA,CAAC;IAGD;;;;;;;OAOG;IACJ,QAAQ,CAAG,CAAS;QACvB,IAAI,CAAC,QAAQ,CAAC,IAAI,CAAE,CAAC,CAAE,CAAC;IACrB,CAAC;IAAA,CAAC;IAEF;;;;;;;;QAQI;IACJ,aAAa,CAAG,QAAiB;QACpC,MAAM,EAAE,GAAmB,EAAE,CAAC;QAC9B,MAAM,EAAE,GAAmB,EAAE,CAAC;QAC9B,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAG,CAAC;YAC7C,EAAE,CAAC,IAAI,CAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAC,CAAE,CAAC;YAC9B,EAAE,CAAC,IAAI,CAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAC,CAAE,CAAC;QAClC,CAAC;QACD,MAAM,MAAM,GAA6B,EAAE,CAAC;QAE5C,IAAI,CAAC,GAAY,IAAI,CAAC,QAAQ,CAAC,MAAM,CAAC;QACtC,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC;YACR,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC;gBAChB,4CAA4C;gBAC5C,MAAM,CAAC,IAAI,CAAE,IAAI,gBAAgB,CAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAE,CAAE,CAAC;YAC3G,CAAC;iBAAM,CAAC;gBACX,IAAI,CAAC,QAAQ,EAAG,CAAC;oBACb,aAAa;oBACb,yDAAyD;oBACzD,wCAAwC;oBACxC,MAAM,SAAS,GAAoB,eAAe,CAAC,KAAK,CAAC,mBAAmB,CAAC,EAAE,CAAC,CAAC;oBACjF,MAAM,SAAS,GAAoB,eAAe,CAAC,KAAK,CAAC,mBAAmB,CAAC,EAAE,CAAC,CAAC;oBACjF,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;wBAChC,wDAAwD;wBACxD,MAAM,CAAC,IAAI,CAAE,IAAI,gBAAgB,CAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,GAAC,CAAC,CAAC,EAC9C,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,EAChB,IAAI,MAAM,CAAC,SAAS,CAAC,KAAK,CAAC,CAAC,GAAC,CAAC,CAAC,EAAE,SAAS,CAAC,KAAK,CAAC,CAAC,GAAC,CAAC,CAAC,CAAC,EAAE,sDAAsD;wBAC9G,IAAI,MAAM,CAAC,SAAS,CAAC,GAAG,CAAC,CAAC,GAAC,CAAC,CAAC,EAAE,SAAS,CAAC,GAAG,CAAC,CAAC,GAAC,CAAC,CAAC,CAAC,CAAE,+BAA+B;yBACpF,CAAE,CAAA;oBACL,CAAC;gBACL,CAAC;qBAAM,CAAC;oBACJ,6CAA6C;oBAC7C,8BAA8B;oBAC9B,IAAI,SAAS,GAAoB,eAAe,CAAC,KAAK,CAAC,qBAAqB,CAAC,EAAE,CAAC,CAAC;oBACjF,IAAI,SAAS,GAAoB,eAAe,CAAC,KAAK,CAAC,qBAAqB,CAAC,EAAE,CAAC,CAAC;oBACjF,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;wBAChC,iDAAiD;wBACjD,IAAI,CAAC,GAAG,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,CAAC;wBAClB,MAAM,CAAC,IAAI,CAAE,IAAI,gBAAgB,CAAE,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,EAC5C,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,EAChB,IAAI,MAAM,CAAC,SAAS,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,SAAS,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,4BAA4B;wBAChF,IAAI,MAAM,CAAC,SAAS,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,SAAS,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAE,2BAA2B;yBAC5E,CAAE,CAAA;oBACL,CAAC;gBACL,CAAC;YACE,CAAC;QACL,CAAC;QAED,OAAO,MAAM,CAAC;IACX,CAAC;IAAA,CAAC;CAyEL;AAtEU,qBAAK,GAAG;IAClB,qBAAqB,EAAG,CAAE,MAAoB,EAAoB,EAAE;QAChE,MAAM,CAAC,GAAY,MAAM,CAAC,MAAM,CAAC;QACjC,oEAAoE;QACpE,aAAa;QACb,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,uDAAuD;QACvD,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,CAAC,CAAC;QACjC,CAAC,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACX,CAAC,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACX,CAAC,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,CAAC,CAAC;QACrC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;YAClC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;YACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;YACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;YACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,GAAC,CAAC,CAAC,CAAC;QAChC,CAAC;QACD,kEAAkE;QAClE,uBAAuB;QACvB,MAAM,EAAE,GAAmB,SAAS,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC;QACrE,4CAA4C;QAC5C,MAAM,EAAE,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAChD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAC,CAAC,EAAE,CAAC,EAAE;YAC/B,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,GAAC,CAAC,CAAC,CAAC;QAC7B,EAAE,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;QAC9B,OAAO,EAAE,KAAK,EAAG,EAAE,EAAE,GAAG,EAAG,EAAE,EAAE,CAAC;IACpC,CAAC;IAGD,qEAAqE;IACrE,sEAAsE;IACtE,qEAAqE;IACrE,gEAAgE;IAChE,mBAAmB,EAAG,CAAE,MAAqB,EAAoB,EAAE;QAC/D,MAAM,CAAC,GAAY,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC;QACrC,oEAAoE;QACpE,aAAa;QACb,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,MAAM,CAAC,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAC/C,uDAAuD;QACvD,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACT,CAAC,CAAC,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,CAAC,CAAC;QAC/B,CAAC,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACX,CAAC,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACX,CAAC,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;QACnC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;YAClC,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;YACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;YACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;YACT,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,GAAC,CAAC,CAAC,CAAC;QAChC,CAAC;QACD,mDAAmD;QACnD,MAAM,EAAE,GAAmB,SAAS,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC;QAC9D,4CAA4C;QAC5C,MAAM,EAAE,GAAmB,IAAI,KAAK,CAAS,CAAC,CAAC,CAAC;QAChD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,CAAC,GAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC;YAClC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC,GAAC,MAAM,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,GAAC,CAAC,CAAC,CAAC;QAC7B,CAAC;QACD,EAAE,CAAC,CAAC,GAAC,CAAC,CAAC,GAAG,CAAC,MAAM,CAAC,CAAC,CAAC,GAAG,EAAE,CAAC,CAAC,GAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACpC,OAAO,EAAE,KAAK,EAAG,EAAE,EAAE,GAAG,EAAG,EAAE,EAAE,CAAC;IACpC,CAAC;CACG,CAAC,CAAC,YAAY;AAClB,CAAC,CAAC,YAAY"}