penguins-eggs 10.1.0 → 25.7.7

package/conf/distros/fedora/calamares/modules/bootloader.conf

@@ -1,85 +0,0 @@
-# SPDX-FileCopyrightText: no
-# SPDX-License-Identifier: CC0-1.0
-#
-# Bootloader configuration. The bootloader is installed to allow
-# the system to start (and pick one of the installed operating
-# systems to run).
-#
-# Take note that Debian-derivatives that use unmodified GRUB EFI packages
-# should specifically set *efiBootloaderId* to "debian" because that is
-# hard-coded in `grubx64.efi`.
----
-# A variable from global storage which overrides the value of efiBootLoader
-#efiBootLoaderVar: "packagechooser_bootloader"
-
-# Define which bootloader you want to use for EFI installations
-# Possible options are 'grub', 'sb-shim', 'refind` and 'systemd-boot'.
-efiBootLoader: "sb-shim"
-
-# systemd-boot configuration files settings
-
-# kernelSearchPath is the path relative to the root of the install to search for kernels
-# A kernel is identified by finding files which match regular expression, kernelPattern
-kernelSearchPath: "/usr/lib/modules"
-kernelPattern: "^vmlinuz.*"
-
-# loaderEntries is an array of options to add to loader.conf for systemd-boot
-# please note that the "default" option is added programmatically
-loaderEntries:
-  - "timeout 5"
-  - "console-mode keep"
-
-# systemd-boot and refind support custom kernel params
-kernelParams: [ "quiet" ]
-
-# A list of kernel names that refind should accept as kernels
-#refindKernelList: [ "linux","linux-lts","linux-zen","linux-hardened" ]
-
-# GRUB 2 binary names and boot directory
-# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names.
-# These names are also used when using sb-shim, since that needs some
-# GRUB functionality (notably grub-probe) to work. As needed, you may use
-# complete paths like `/usr/bin/efibootmgr` for the executables.
-#
-grubInstall: "grub2-install"
-grubMkconfig: "grub2-mkconfig"
-grubCfg: "/boot/grub2/grub.cfg"
-grubProbe: "grub2-probe"
-efiBootMgr: "efibootmgr"
-
-# Optionally set the bootloader ID to use for EFI. This is passed to
-# grub-install --bootloader-id.
-#
-# If not set here, the value from bootloaderEntryName from branding.desc
-# is used, with problematic characters (space and slash) replaced.
-#
-# The ID is also used as a directory name within the EFI environment,
-# and the bootloader is copied from /boot/efi/EFI/<dirname>/ . When
-# setting the option here, keep in mind that the name is sanitized
-# (problematic characters, see above, are replaced).
-#
-# There are some special words possible at the end of *efiBootloaderId*:
-#   ${SERIAL} can be used to obtain a uniquely-numbered suffix
-#       that is added to the Id (yielding, e.g., `dirname1` or `dirname72`)
-#   ${RANDOM} can be used to obtain a unique 4-digit hex suffix
-#   ${PHRASE} can be used to obtain a unique 1-to-3-word suffix
-#       from a dictionary of space-themed words
-# These words must be at the **end** of the *efiBootloaderId* value.
-# There must also be at most one of them. If there is none, no suffix-
-# processing is done and the *efiBootloaderId* is used unchanged.
-#
-# NOTE: Debian derivatives that use the unmodified Debian GRUB EFI
-#       packages may need to set this to "debian" because that is
-#       hard-coded in `grubx64.efi`.
-#
-# PACKAGER NOTE: If you really want to change this value, you will also have to
-#                change the hardcoded directory name in the grub2(-efi) package.
-efiBootloaderId: "fedora"
-
-# Optionally install a copy of the GRUB EFI bootloader as the EFI
-# fallback loader (either bootia32.efi or bootx64.efi depending on
-# the system). This may be needed on certain systems (Intel DH87MC
-# seems to be the only one). If you set this to false, take care
-# to add another module to optionally install the fallback on those
-# boards that need it.
-installEFIFallback: true

package/conf/distros/opensuse/calamares/modules/bootloader.conf

@@ -1,86 +0,0 @@
-# OpenSuSE
-# SPDX-FileCopyrightText: no
-# SPDX-License-Identifier: CC0-1.0
-#
-# Bootloader configuration. The bootloader is installed to allow
-# the system to start (and pick one of the installed operating
-# systems to run).
-#
-# Take note that Debian-derivatives that use unmodified GRUB EFI packages
-# should specifically set *efiBootloaderId* to "debian" because that is
-# hard-coded in `grubx64.efi`.
----
-# A variable from global storage which overrides the value of efiBootLoader
-#efiBootLoaderVar: "packagechooser_bootloader"
-
-# Define which bootloader you want to use for EFI installations
-# Possible options are 'grub', 'sb-shim', 'refind` and 'systemd-boot'.
-efiBootLoader: "sb-shim"
-
-# systemd-boot configuration files settings
-
-# kernelSearchPath is the path relative to the root of the install to search for kernels
-# A kernel is identified by finding files which match regular expression, kernelPattern
-kernelSearchPath: "/usr/lib/modules"
-kernelPattern: "^vmlinuz.*"
-
-# loaderEntries is an array of options to add to loader.conf for systemd-boot
-# please note that the "default" option is added programmatically
-loaderEntries:
-  - "timeout 5"
-  - "console-mode keep"
-
-# systemd-boot and refind support custom kernel params
-kernelParams: [ "quiet" ]
-
-# A list of kernel names that refind should accept as kernels
-#refindKernelList: [ "linux","linux-lts","linux-zen","linux-hardened" ]
-
-# GRUB 2 binary names and boot directory
-# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names.
-# These names are also used when using sb-shim, since that needs some
-# GRUB functionality (notably grub-probe) to work. As needed, you may use
-# complete paths like `/usr/bin/efibootmgr` for the executables.
-#
-grubInstall: "grub2-install"
-grubMkconfig: "grub2-mkconfig"
-grubCfg: "/boot/grub2/grub.cfg"
-grubProbe: "grub2-probe"
-efiBootMgr: "efibootmgr"
-
-# Optionally set the bootloader ID to use for EFI. This is passed to
-# grub-install --bootloader-id.
-#
-# If not set here, the value from bootloaderEntryName from branding.desc
-# is used, with problematic characters (space and slash) replaced.
-#
-# The ID is also used as a directory name within the EFI environment,
-# and the bootloader is copied from /boot/efi/EFI/<dirname>/ . When
-# setting the option here, keep in mind that the name is sanitized
-# (problematic characters, see above, are replaced).
-#
-# There are some special words possible at the end of *efiBootloaderId*:
-#   ${SERIAL} can be used to obtain a uniquely-numbered suffix
-#       that is added to the Id (yielding, e.g., `dirname1` or `dirname72`)
-#   ${RANDOM} can be used to obtain a unique 4-digit hex suffix
-#   ${PHRASE} can be used to obtain a unique 1-to-3-word suffix
-#       from a dictionary of space-themed words
-# These words must be at the **end** of the *efiBootloaderId* value.
-# There must also be at most one of them. If there is none, no suffix-
-# processing is done and the *efiBootloaderId* is used unchanged.
-#
-# NOTE: Debian derivatives that use the unmodified Debian GRUB EFI
-#       packages may need to set this to "debian" because that is
-#       hard-coded in `grubx64.efi`.
-#
-# PACKAGER NOTE: If you really want to change this value, you will also have to
-#                change the hardcoded directory name in the grub2(-efi) package.
-efiBootloaderId: "fedora"
-
-# Optionally install a copy of the GRUB EFI bootloader as the EFI
-# fallback loader (either bootia32.efi or bootx64.efi depending on
-# the system). This may be needed on certain systems (Intel DH87MC
-# seems to be the only one). If you set this to false, take care
-# to add another module to optionally install the fallback on those
-# boards that need it.
-installEFIFallback: true

package/conf/distros/opensuse/calamares/modules/locale.yml

@@ -1,98 +0,0 @@
-# OpenSuSE
----
-# This settings are used to set your default system time zone.
-# Time zones are usually located under /usr/share/zoneinfo and
-# provided by the 'tzdata' package of your Distribution.
-#
-# Distributions using systemd can list available
-# time zones by using the timedatectl command.
-#    timedatectl list-timezones
-#
-# The starting timezone (e.g. the pin-on-the-map) when entering
-# the locale page can be set through keys *region* and *zone*.
-# If either is not set, defaults to America/New_York.
-#
-region:                     "Europe"
-zone:                       "Rome"
-
-
-# System locales are detected in the following order:
-#
-#  - /usr/share/i18n/SUPPORTED
-#  - localeGenPath (defaults to /etc/ if not set)
-#  - 'locale -a' output
-#
-# Enable only when your Distribution is using an
-# custom path for 
-#
-#localeGenPath:             "PATH_TO/"
-
-# GeoIP based Language settings: Leave commented out to disable GeoIP.
-#
-# GeoIP needs a working Internet connection.
-# This can be managed from `welcome.conf` by adding
-# internet to the list of required conditions.
-#
-# The configuration
-# is in three parts: a *style*, which can be "json" or "xml"
-# depending on the kind of data returned by the service, and
-# a *url* where the data is retrieved, and an optional *selector*
-# to pick the right field out of the returned data (e.g. field
-# name in JSON or element name in XML).
-#
-# The default selector (when the setting is blank) is picked to
-# work with existing JSON providers (which use "time_zone") and
-# Ubiquity's XML providers (which use "TimeZone").
-#
-# If the service configured via *url* uses
-# a different attribute name (e.g. "timezone") in JSON or a
-# different element tag (e.g. "<Time_Zone>") in XML, set this
-# string to the name or tag to be used.
-#
-# In JSON:
-#  - if the string contains "." characters, this is used as a
-#    multi-level selector, e.g. "a.b" will select the timezone
-#    from data "{a: {b: "Europe/Amsterdam" } }".
-#  - each part of the string split by "." characters is used as
-#    a key into the JSON data.
-# In XML:
-#  - all elements with the named tag (e.g. all TimeZone) elements
-#    from the document are checked; the first one with non-empty
-#    text value is used.
-#
-#
-# An HTTP(S) request is made to *url*. The request should return
-# valid data in a suitable format, depending on *style*;
-# generally this includes a string value with the timezone
-# in <region>/<zone> format. For services that return data which
-# does not follow the conventions of "suitable data" described
-# below, *selector* may be used to pick different data.
-#
-# Note that this example URL works, but the service is shutting
-# down in June 2018.
-#
-# Suitable JSON data looks like
-# ```
-#    {"time_zone":"America/New_York"}
-# ```
-# Suitable XML data looks like
-# ```
-#    <Response><TimeZone>Europe/Brussels</TimeZone></Response>
-# ```
-#
-# To accommodate providers of GeoIP timezone data with peculiar timezone
-# naming conventions, the following cleanups are performed automatically:
-#  - backslashes are removed
-#  - spaces are replaced with _
-#
-# Legacy settings "geoipStyle", "geoipUrl" and "geoipSelector"
-# in the top-level are still supported, but I'd advise against.
-#
-# To disable GeoIP checking, either comment-out the entire geoip section,
-# or set the *style* key to an unsupported format (e.g. `none`).
-# Also, note the analogous feature in src/modules/welcome/welcome.conf.
-#
-geoip:
-    style:    "json"
-    url:      "https://geoip.kde.org/v1/calamares"
-    selector: ""  # leave blank for the default

package/conf/distros/opensuse/calamares/modules/luksopenswaphookcfg.yml

@@ -1,5 +0,0 @@
-# OpenSuSE
-# Writes an openswap configuration with LUKS settings to the given path
----
-# Path of the configuration file to write (in the target system)
-configFilePath: /etc/openswap.conf

package/conf/distros/opensuse/calamares/modules/machineid.yml

@@ -1,17 +0,0 @@
-# OpenSuSE
-# added Whether to copy entropy from the host
----
-# Whether to create /etc/machine-id for systemd.
-systemd: true
-# Whether to create /var/lib/dbus/machine-id for D-Bus.
-dbus: true
-# Whether /var/lib/dbus/machine-id should be a symlink to /etc/machine-id
-# (ignored if dbus is false, or if there is no /etc/machine-id to point to).
-symlink: true
-# Whether to copy entropy from the host
-entropy-copy: true
-# Which files to write (paths in the target)
-entropy-files:
-    - /var/lib/urandom/random-seed
-    - /var/lib/systemd/random-seed
-

package/conf/distros/rolling/calamares/modules/shellprocess_removelink.yml

@@ -1,8 +0,0 @@
-# Arch
-# Calamares 3.3
----
-dontChroot: false
-timeout: 30
-script:
-    - "rm -r ${ROOT}/usr/share/applications/install-system.desktop"
-   

package/dracut/sidecar.sh

@@ -1,19 +0,0 @@
-#!/bin/bash
-clear
-echo "Penguins' eggs: sidecar.sh"
-echo "=========================="
-sleep 2
-
-# filesystem squashfs is mounted on 
-# /run/rootfsbase
-
-# mount tmpfs on /media/root-rw
-mkdir -p /run/root-rw 
-mount -t tmpfs root-tmpfs /run/root-rw
-
-# creare i punti di montaggio necessari
-mkdir -p /run/root-rw/work 
-mkdir -p /run/root-rw/root
-
-# mount  overlayfs on /sysroot
-mount -t overlay overlay -o lowerdir=/run/rootfsbase,upperdir=/run/root-rw/root,workdir=/run/root-rw/work /sysroot