penguins-eggs 10.1.0 → 25.7.7

package/conf/distros/fedora/calamares/modules/partition.yml

@@ -1,14 +1,50 @@
-# Fedora
-# partition.yaml
----
-# This setting specifies the mount point of the EFI system partition. Some
-# distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
-# etc.) use just /boot.
-efiSystemPartition:     "/boot/efi"
-
-# This optional setting specifies the size of the EFI system partition.
-# If nothing is specified, the default size of 300MiB will be used.
-# efiSystemPartitionSize:     300M
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+
+# Options for EFI system partition.
+#
+# - *mountPoint*
+#   This setting specifies the mount point of the EFI system partition. Some
+#   distributions (Fedora, Debian, Manjaro, etc.) use /boot/efi, others (KaOS,
+#   etc.) use just /boot.
+#
+#   Defaults to "/boot/efi", may be empty (but weird effects ensue)
+# - *recommendedSize*
+#   This optional setting specifies the size of the EFI system partition.
+#   If nothing is specified, the default size of 300MiB will be used.
+#   When writing quantities here, M is treated as MiB, and if you really
+#   want one-million (10^6) bytes, use MB.
+# - *minimumSize*
+#   This optional setting specifies the absolute minimum size of the EFI
+#   system partition. If nothing is specified, the *recommendedSize*
+#   is used instead.
+# - *label*
+#   This optional setting specifies the name of the EFI system partition (see
+#   PARTLABEL; gpt only; requires KPMCore >= 4.2.0).
+#   If nothing is specified, the partition name is left unset.
+#
+# Going below the *recommended* size is allowed, but the user will
+# get a warning that it might not work. Going below the *minimum*
+# size is not allowed and the user will be told it will not work.
+#
+# Both quantities must be at least 32MiB, this is enforced by the EFI
+# spec. If minimum is not specified, it defaults to the recommended
+# size. Distros that allow more user latitude can set the minimum lower.
+efi:
+    mountPoint:         "/boot/efi"
+    recommendedSize:    300MiB
+    minimumSize:        32MiB
+    label:              "EFI"
+
+# Deprecated alias of efi.mountPoint
+# efiSystemPartition:     "/boot/efi"
+
+# Deprecated alias of efi.recommendedSize
+# efiSystemPartitionSize:          300MiB
+
+# Deprecated alias of efi.label
+# efiSystemPartitionName:     EFI
 
 # In autogenerated partitioning, allow the user to select a swap size?
 # If there is exactly one choice, no UI is presented, and the user
@@ -51,6 +87,30 @@ userSwapChoices:
 # ensureSuspendToDisk:    true
 # neverCreateSwap:        false
 
+# This setting specifies the LUKS generation (i.e LUKS1, LUKS2) used internally by
+# cryptsetup when creating an encrypted partition.
+#
+# This option is set to luks1 by default, as grub doesn't support LUKS2 + Argon2id
+# currently. On the other hand grub does support LUKS2 with PBKDF2 and could therefore be
+# also set to luks2. Also there are some patches for grub and Argon2.
+# See: https://aur.archlinux.org/packages/grub-improved-luks2-git
+#
+# Choices: luks1, luks2 (in addition, "luks" means "luks1")
+#
+# The default is luks1
+#
+luksGeneration: luks1
+
+# This setting determines if encryption should be allowed when using zfs.  This
+# setting has no effect unless zfs support is provided.
+#
+# This setting is to handle the fact that some bootloaders(such as grub) do not
+# support zfs encryption.
+#
+# The default is true
+#
+# allowZfsEncryption: true
+
 # Correctly draw nested (e.g. logical) partitions as such.
 drawNestedPartitions:   false
 
@@ -67,6 +127,15 @@ alwaysShowPartitionLabels: true
 # If nothing is specified, manual partitioning is enabled.
 #allowManualPartitioning:   true
 
+# Show not encrypted boot partition warning.
+#
+# When set to false, this option does not show the
+# "Boot partition not encrypted" warning when encrypting the
+# root partition but not /boot partition.
+#
+# If nothing is specified, the warning is shown.
+#showNotEncryptedBootMessage:   true
+
 # Initial selection on the Choice page
 #
 # There are four radio buttons (in principle: erase, replace, alongside, manual),
@@ -87,6 +156,13 @@ initialPartitioningChoice: none
 # one of the items from the options.
 initialSwapChoice: none
 
+# armInstall
+#
+# Leaves 16MB empty at the start of a drive when partitioning
+# where usually the u-boot loader goes
+#
+# armInstall: false
+
 # Default partition table type, used when a "erase" disk is made.
 #
 # When erasing a disk, a new partition table is created on disk.
@@ -94,19 +170,28 @@ initialSwapChoice: none
 # manual partitioning, this partition table exists already on disk
 # and it is left unmodified.
 #
-# Suggested values: gpt, msdos
+# Possible values: gpt, msdos (or other names defined by KPMcore).
+# Names are case-sensitive.
+#
 # If nothing is specified, Calamares defaults to "gpt" if system is
-# efi or "msdos".
+# efi or "msdos" otherwise.
 #
-# Names are case-sensitive and defined by KPMCore.
 # defaultPartitionTableType: msdos
 
+# Specify whether to create a partition table layout suitable for a hybrid
+# (BIOS + EFI) bootloader installation. This will prepend both bios-boot and
+# EFI system partitions to the partition layout, regardless of whether the
+# booted system uses BIOS or EFI firmware. Defaults to false.
+#
+# createHybridBootloaderLayout: false
+
 # Requirement for partition table type
 #
 # Restrict the installation on disks that match the type of partition
 # tables that are specified.
 #
-# Possible values: msdos, gpt. Names are case-sensitive and defined by KPMCore.
+# Possible values: msdos, gpt (or other names defined by KPMcore).
+# Names are case-sensitive.
 #
 # If nothing is specified, Calamares defaults to both "msdos" and "gpt".
 #
@@ -117,8 +202,8 @@ initialSwapChoice: none
 
 # Default filesystem type, used when a "new" partition is made.
 #
-# When replacing a partition, the existing filesystem inside the
-# partition is retained. In other cases, e.g. Erase and Alongside,
+# When replacing a partition, the new filesystem type will be from the
+# defaultFileSystemType value. In other cases, e.g. Erase and Alongside,
 # as well as when using manual partitioning and creating a new
 # partition, this filesystem type is pre-selected. Note that
 # editing a partition in manual-creation mode will not automatically
@@ -143,7 +228,57 @@ defaultFileSystemType:  "ext4"
 #
 # If not specified at all, uses *defaultFileSystemType* without a
 # warning (this matches traditional no-choice-available behavior best).
-availableFileSystemTypes:  ["ext4"]
+# availableFileSystemTypes:  ["ext4","f2fs"]
+
+# Per-directory filesystem restrictions.
+#
+# This optional setting specifies what filesystems the user can and cannot use
+# for various directories and mountpoints when using manual partitioning.
+#
+# If nothing is specified, the only restriction enforced by default is that
+# the EFI system partition must use the fat32 filesystem.
+#
+# Otherwise, the filesystem restrictions are defined as follow:
+#
+# directoryFilesystemRestrictions:
+#     - directory: "any"
+#       allowedFilesystemTypes: ["all"]
+#     - directory: "/"
+#       allowedFilesystemTypes: ["ext4","xfs","btrfs","jfs","f2fs"]
+#     - mountpoint: "efi"
+#       allowedFilesystemTypes: ["fat32"]
+#       onlyWhenMountpoint: true
+#
+# There can be any number of mountpoints listed, each entry having the
+# following attributes:
+#   - mountpoint: mountpoint's full path
+#                 or
+#                 "any" to specify a global whitelist that applies to all
+#                 mountpoints
+#                 or
+#                 "efi" to specify a whitelist specific to the EFI system
+#                 partition, wherever that partition is located
+#   - allowedFilesystemTypes: the list of all filesystems valid for this
+#                             mountpoint. If the list contains exactly one
+#                             element, and that element is the special value
+#                             "any", all filesystem types recognized by
+#                             Calamares will be allowed.
+#   - onlyWhenMountpoint: Whether the restriction should apply only when the
+#                         specified directory is a mountpoint. When set to
+#                         true, Calamares will only enforce the listed
+#                         restrictions when the user makes a separate partition
+#                         for this directory and assigns the mountpoint
+#                         accordingly. When set to false, Calamares will
+#                         ensure this directory uses the specified filesystem
+#                         even if the directory is part of a filesystem on a
+#                         different mountpoint. Defaults to false.
+
+# The ClearMounts job unmounts / unmaps things before partitioning.
+# Some special entries under /dev/mapper are excepted from this process.
+# The example lists the three hard-coded exceptions which always apply
+# (they don't need to be listed here). Add other names or wildcards (with
+# a trailing '*') to this list if the live-ISO has additional mounts.
+essentialMounts: [ "live-*", "control", "ventoy" ]
 
 # Show/hide LUKS related functionality in automated partitioning modes.
 # Disable this if you choose not to deploy early unlocking support in GRUB2
@@ -164,6 +299,18 @@ availableFileSystemTypes:  ["ext4"]
 # If nothing is specified, LUKS is enabled in automated modes.
 #enableLuksAutomatedPartitioning:    true
 
+# When enableLuksAutomatedPartitioning is true, this option will pre-check
+# encryption checkbox. This option is only usefull to help people to not forget
+# to cypher their disk when installing in enterprise (for example).
+#preCheckEncryption:    false
+
+# LVM support
+#
+# There is only one sub-key available, *enable* (defaults to true)
+# which can be used to show (default) or hide the LVM buttons in the partitioning module.
+lvm:
+    enable: true
+
 # Partition layout.
 #
 # This optional setting specifies a custom partition layout.
@@ -172,9 +319,9 @@ availableFileSystemTypes:  ["ext4"]
 # for root that uses 100% of the space and uses the filesystem defined by
 # defaultFileSystemType.
 #
-# Note: the EFI system partition is prepend automatically to the layout if
-# needed; the swap partition is appended to the layout if enabled (small of
-# suspend).
+# Note: the EFI system partition is prepended automatically to the layout if
+# needed; the swap partition is appended to the layout if enabled (selections
+# "small" or "suspend" in *userSwapChoices*).
 #
 # Otherwise, the partition layout is defined as follow:
 #
@@ -182,14 +329,16 @@ availableFileSystemTypes:  ["ext4"]
 #     - name: "rootfs"
 #       type: "4f68bce3-e8cd-4db1-96e7-fbcaf984b709"
 #       filesystem: "ext4"
+#       noEncrypt: false
 #       mountPoint: "/"
 #       size: 20%
 #       minSize: 500M
 #       maxSize: 10G
 #       attributes: 0xffff000000000003
 #     - name: "home"
-#       type = "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
+#       type: "933ac7e1-2eb4-4f13-b844-0e14e2aef915"
 #       filesystem: "ext4"
+#       noEncrypt: false
 #       mountPoint: "/home"
 #       size: 3G
 #       minSize: 1.5G
@@ -217,6 +366,7 @@ availableFileSystemTypes:  ["ext4"]
 #       - if "unknown" (or an unknown FS name, like "elephant") then the
 #         default filesystem type, or the user's choice, will be applied instead
 #         of "unknown" (e.g. the user might pick ext4, or xfs).
+#   - noEncrypt: whether this partition is exempt from encryption if enabled (optional parameter; default is false)
 #   - mountPoint: partition mount point (optional parameter; not mounted if unset)
 #   - size: partition size in bytes (append 'K', 'M' or 'G' for KiB, MiB or GiB)
 #           or
@@ -239,4 +389,4 @@ availableFileSystemTypes:  ["ext4"]
 # BIG FAT WARNING: except for OEM-phase-0 use, you should be using
 #                  the welcome module, **and** configure this value in
 #                  `welcome.conf`, not here.
-requiredStorage: 6.0
+# requiredStorage: 3.5

package/conf/distros/fedora/calamares/modules/users.yml

@@ -2,18 +2,16 @@
 ---
 userGroup: users
 defaultGroups:
+  - audio
   - cdrom
+  - dialout
   - floppy
-  - sudo
-  - audio
-  - dip
+  - users
   - video
-  - plugdev
-  - netdev
-  # lpadmin
-  # scanner
-  # bluetooth
+  # netdev
+  # plugdev
 autologinGroup: autologin
 sudoersGroup: sudo
 setRootPassword: true
-doReusePassword: false
+doReusePassword: false
+

package/conf/distros/noble/calamares/modules/users.yml

@@ -13,6 +13,7 @@ defaultGroups:
       must_exist: false
       system: true
     - sudo
+    # www-data
 passwordRequirements:
     minLength: 1
     maxLength: -1

package/conf/distros/openmamba/calamares/settings.yml

@@ -142,8 +142,6 @@ sequence:
   - packages
   - grubcfg
   - bootloader
-  # openmamba-postinstall tuo
-  # cleanup mio 
   - umount
 - show:
   - finished

package/conf/distros/opensuse/calamares/modules/bootloader.yml

@@ -1,25 +1,39 @@
-# OpenSuSE
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
 # Bootloader configuration. The bootloader is installed to allow
 # the system to start (and pick one of the installed operating
 # systems to run).
+#
+# Take note that Debian-derivatives that use unmodified GRUB EFI packages
+# should specifically set *efiBootloaderId* to "debian" because that is
+# hard-coded in `grubx64.efi`.
 ---
+# A variable from global storage which overrides the value of efiBootLoader
+#efiBootLoaderVar: "packagechooser_bootloader"
+
 # Define which bootloader you want to use for EFI installations
-# Possible options are 'grub', 'sb-shim' and 'systemd-boot'.
+# Possible options are 'grub', 'sb-shim', 'refind` and 'systemd-boot'.
 efiBootLoader: "grub"
 
-# systemd-boot configuration files settings, set kernel and initramfs file names
-# and amount of time before default selection boots
-kernel: "/vmlinuz-linux"
-img: "/initramfs-linux.img"
-fallback: "/initramfs-linux-fallback.img"
-timeout: "10"
+# systemd-boot configuration files settings
 
-# Optionally set the menu entry name and kernel name to use in systemd-boot.
-# If not specified here, these settings will be taken from branding.desc.
-#
-# bootloaderEntryName: "Generic GNU/Linux"
-# kernelLine: ", with Stable-Kernel"
-# fallbackKernelLine:  ", with Stable-Kernel (fallback initramfs)"
+# kernelSearchPath is the path relative to the root of the install to search for kernels
+# A kernel is identified by finding files which match regular expression, kernelPattern
+kernelSearchPath: "/usr/lib/modules"
+kernelPattern: "^vmlinuz.*"
+
+# loaderEntries is an array of options to add to loader.conf for systemd-boot
+# please note that the "default" option is added programmatically
+loaderEntries:
+  - "timeout 5"
+  - "console-mode keep"
+
+# systemd-boot and refind support custom kernel params
+kernelParams: [ "quiet" ]
+
+# A list of kernel names that refind should accept as kernels
+#refindKernelList: [ "linux","linux-lts","linux-zen","linux-hardened" ]
 
 # GRUB 2 binary names and boot directory
 # Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names.
@@ -29,7 +43,7 @@ timeout: "10"
 #
 grubInstall: "grub2-install"
 grubMkconfig: "grub2-mkconfig"
-grubCfg: "/boot/grub/grub.cfg"
+grubCfg: "/boot/grub2/grub.cfg"
 grubProbe: "grub2-probe"
 efiBootMgr: "efibootmgr"
 
@@ -44,8 +58,21 @@ efiBootMgr: "efibootmgr"
 # setting the option here, keep in mind that the name is sanitized
 # (problematic characters, see above, are replaced).
 #
+# There are some special words possible at the end of *efiBootloaderId*:
+#   ${SERIAL} can be used to obtain a uniquely-numbered suffix
+#       that is added to the Id (yielding, e.g., `dirname1` or `dirname72`)
+#   ${RANDOM} can be used to obtain a unique 4-digit hex suffix
+#   ${PHRASE} can be used to obtain a unique 1-to-3-word suffix
+#       from a dictionary of space-themed words
+# These words must be at the **end** of the *efiBootloaderId* value.
+# There must also be at most one of them. If there is none, no suffix-
+# processing is done and the *efiBootloaderId* is used unchanged.
+#
+# NOTE: Debian derivatives that use the unmodified Debian GRUB EFI
+#       packages may need to set this to "debian" because that is
+#       hard-coded in `grubx64.efi`.
+#
 # efiBootloaderId: "dirname"
-efiBootloaderId: "fedora"
 
 # Optionally install a copy of the GRUB EFI bootloader as the EFI
 # fallback loader (either bootia32.efi or bootx64.efi depending on
@@ -53,5 +80,7 @@ efiBootloaderId: "fedora"
 # seems to be the only one). If you set this to false, take care
 # to add another module to optionally install the fallback on those
 # boards that need it.
-# NOTE: eggs unti calamres 3.2 was installEFIFallback: false
 installEFIFallback: true
+
+# Optionally install both BIOS and UEFI GRUB bootloaders.
+installHybridGRUB: false

package/conf/distros/opensuse/calamares/modules/displaymanager.yml

@@ -1,11 +1,15 @@
-# OpenSuSE
-# Configure one or more display managers (e.g. SDDM)
-# with a "best effort" approach.
 ---
 #The DM module attempts to set up all the DMs found in this list, in that precise order.
 #It also sets up autologin, if the feature is enabled in globalstorage.
 #The displaymanagers list can also be set in globalstorage, and in that case it overrides anything set up here.
-displaymanagers: none
+displaymanagers:
+  - slim
+  - sddm
+  - lightdm
+  - gdm
+  - mdm
+  - lxdm
+  - kdm
 
 #Enable the following settings to force a desktop environment in your displaymanager configuration file:
 #defaultDesktopEnvironment:
@@ -19,4 +23,4 @@ basicSetup: false
 
 #If true, setup autologin for openSUSE. This only makes sense on openSUSE
 #derivatives or other systems where /etc/sysconfig/displaymanager exists.
-sysconfigSetup: false
+sysconfigSetup: true

package/conf/distros/opensuse/calamares/modules/finished.yml

@@ -1,4 +1,4 @@
-# OpenSuSE
+# Debian/Bookworm
 ---
 restartNowEnabled: true
 restartNowChecked: true

package/conf/distros/opensuse/calamares/modules/fstab.yml

@@ -1,12 +1,37 @@
-# OpenSuSE
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Creates /etc/fstab and /etc/crypttab in the target system.
+# Also creates mount points for all the filesystems.
+#
+# When creating fstab entries for a filesystem, this module
+# uses the options previously defined in the mount module
 ---
-mountOptions:
-  default: defaults,noatime
-  btrfs: defaults   #,noatime,space_cache,autodefrag
-ssdExtraMountOptions:
-  ext4: discard
-  jfs: discard
-  xfs: discard
-  swap: discard
-  btrfs: discard,compress=lzo
-crypttabOptions: luks,keyscript=/bin/cat
+
+# Additional options added to each line in /etc/crypttab
+crypttabOptions: luks
+# For Debian and Debian-based distributions, change the above line to:
+# crypttabOptions: luks,keyscript=/bin/cat
+
+# Options for handling /tmp in /etc/fstab
+# Currently default (required) and ssd are supported
+# The corresponding string can contain the following variables:
+# tmpfs: true or tmpfs: false to either mount /tmp as tmpfs or not
+# options: "<mount options>"
+#
+# Example:
+#tmpOptions:
+#    default:
+#        tmpfs: false
+#        options: ""
+#    ssd:
+#        tmpfs: true
+#        options: "defaults,noatime,mode=1777"
+#
+tmpOptions:
+    default:
+        tmpfs: false
+        options: ""
+    ssd:
+        tmpfs: true
+        options: "defaults,noatime,mode=1777"

package/conf/distros/opensuse/calamares/modules/grubcfg.yml

@@ -0,0 +1,51 @@
+# SPDX-FileCopyrightText: no
+# SPDX-License-Identifier: CC0-1.0
+#
+# Create, overwrite or update /etc/default/grub in the target system.
+#
+# Write lines to /etc/default/grub (in the target system) based
+# on calculated values and the values set in the *defaults* key
+# in this configuration file.
+#
+# Calculated values are:
+#   - GRUB_DISTRIBUTOR,   branding module, *bootloaderEntryName* (this
+#     string is sanitized, and see also setting *keep_distributor*)
+#   - GRUB_ENABLE_CRYPTODISK, based on the presence of filesystems
+#     that use LUKS
+#   - GRUB_CMDLINE_LINUX_DEFAULT, adding LUKS setup and plymouth
+#     support to the kernel.
+
+---
+# If set to true, always creates /etc/default/grub from scratch even if the file
+# already existed. If set to false, edits the existing file instead.
+overwrite: false
+
+# If set to true, prefer to write files in /etc/default/grub.d/
+# rather than the single file /etc/default/grub. If this is set,
+# Calamares will write /etc/default/grub.d/00calamares.cfg instead.
+prefer_grub_d: false
+
+# If set to true, an **existing** setting for GRUB_DISTRIBUTOR is
+# kept, not updated to the *bootloaderEntryName* from the branding file.
+# Use this if the GRUB_DISTRIBUTOR setting in the file is "smart" in
+# some way (e.g. uses shell-command substitution).
+keep_distributor: false
+
+# The default kernel params that should always be applied.
+# This is an array of strings. If it is unset, the default is
+# `["quiet"]`. To avoid the default, explicitly set this key
+# to an empty list, `[]`.
+kernel_params: [ "quiet" ]
+
+# Default entries to write to /etc/default/grub if it does not exist yet or if
+# we are overwriting it.
+#
+defaults:
+    GRUB_TIMEOUT: 5
+    GRUB_DEFAULT: "saved"
+    GRUB_DISABLE_SUBMENU: true
+    GRUB_TERMINAL_OUTPUT: "console"
+    GRUB_DISABLE_RECOVERY: true
+
+# Set to true to force defaults to be used even when not overwriting
+always_use_defaults: false