opencode-skills-collection 3.1.12 → 3.1.13

package/bundled-skills/rclone-cli/references/commands/rclone_bisync.md

@@ -0,0 +1,160 @@
+---
+title: "rclone bisync"
+description: "Perform bidirectional synchronization between two paths."
+versionIntroduced: v1.58
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/bisync/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_bisync/](https://rclone.org/commands/rclone_bisync/)
+# rclone bisync
+
+Perform bidirectional synchronization between two paths.
+
+## Synopsis
+
+Perform bidirectional synchronization between two paths.
+
+[Bisync](https://rclone.org/bisync/) provides a
+bidirectional cloud sync solution in rclone.
+It retains the Path1 and Path2 filesystem listings from the prior run.
+On each successive run it will:
+
+- list files on Path1 and Path2, and check for changes on each side.
+  Changes include `New`, `Newer`, `Older`, and `Deleted` files.
+- Propagate changes on Path1 to Path2, and vice-versa.
+
+Bisync is considered an **advanced command**, so use with care.
+Make sure you have read and understood the entire [manual](https://rclone.org/bisync)
+(especially the [Limitations](https://rclone.org/bisync/#limitations) section)
+before using, or data loss can result. Questions can be asked in the
+[Rclone Forum](https://forum.rclone.org/).
+
+See [full bisync description](https://rclone.org/bisync/) for details.
+
+```
+rclone bisync remote1:path1 remote2:path2 [flags]
+```
+
+## Options
+
+```
+      --backup-dir1 string                   --backup-dir for Path1. Must be a non-overlapping path on the same remote.
+      --backup-dir2 string                   --backup-dir for Path2. Must be a non-overlapping path on the same remote.
+      --check-access                         Ensure expected RCLONE_TEST files are found on both Path1 and Path2 filesystems, else abort.
+      --check-filename string                Filename for --check-access (default: RCLONE_TEST)
+      --check-sync string                    Controls comparison of final listings: true|false|only (default: true) (default "true")
+      --compare string                       Comma-separated list of bisync-specific compare options ex. 'size,modtime,checksum' (default: 'size,modtime')
+      --conflict-loser ConflictLoserAction   Action to take on the loser of a sync conflict (when there is a winner) or on both files (when there is no winner): , num, pathname, delete (default: num)
+      --conflict-resolve string              Automatically resolve conflicts by preferring the version that is: none, path1, path2, newer, older, larger, smaller (default: none) (default "none")
+      --conflict-suffix string               Suffix to use when renaming a --conflict-loser. Can be either one string or two comma-separated strings to assign different suffixes to Path1/Path2. (default: 'conflict')
+      --create-empty-src-dirs                Sync creation and deletion of empty directories. (Not compatible with --remove-empty-dirs)
+      --download-hash                        Compute hash by downloading when otherwise unavailable. (warning: may be slow and use lots of data!)
+      --filters-file string                  Read filtering patterns from a file
+      --force                                Bypass --max-delete safety check and run the sync. Consider using with --verbose
+  -h, --help                                 help for bisync
+      --ignore-listing-checksum              Do not use checksums for listings (add --ignore-checksum to additionally skip post-copy checksum checks)
+      --max-lock Duration                    Consider lock files older than this to be expired (default: 0 (never expire)) (minimum: 2m) (default 0s)
+      --no-cleanup                           Retain working files (useful for troubleshooting and testing).
+      --no-slow-hash                         Ignore listing checksums only on backends where they are slow
+      --recover                              Automatically recover from interruptions without requiring --resync.
+      --remove-empty-dirs                    Remove ALL empty directories at the final cleanup step.
+      --resilient                            Allow future runs to retry after certain less-serious errors, instead of requiring --resync.
+  -1, --resync                               Performs the resync run. Equivalent to --resync-mode path1. Consider using --verbose or --dry-run first.
+      --resync-mode string                   During resync, prefer the version that is: path1, path2, newer, older, larger, smaller (default: path1 if --resync, otherwise none for no resync.) (default "none")
+      --slow-hash-sync-only                  Ignore slow checksums for listings and deltas, but still consider them during sync calls.
+      --workdir string                       Use custom working dir - useful for testing. (default: {WORKDIR})
+```
+
+Options shared with other commands are described next.
+See the [global flags page](/flags/) for global options not listed here.
+
+### Copy Options
+
+Flags for anything which can copy a file
+
+```text
+      --check-first                                 Do all the checks before starting transfers
+  -c, --checksum                                    Check for changes with size & checksum (if available, or fallback to size only)
+      --compare-dest stringArray                    Include additional server-side paths during comparison
+      --copy-dest stringArray                       Implies --compare-dest but also copies files from paths into destination
+      --cutoff-mode HARD|SOFT|CAUTIOUS              Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default HARD)
+      --ignore-case-sync                            Ignore case when synchronizing
+      --ignore-checksum                             Skip post copy check of checksums
+      --ignore-existing                             Skip all files that exist on destination
+      --ignore-size                                 Ignore size when skipping use modtime or checksum
+  -I, --ignore-times                                Don't skip items that match size and time - transfer all unconditionally
+      --immutable                                   Do not modify files, fail if existing files have been modified
+      --inplace                                     Download directly to destination file instead of atomic download to temp/rename
+  -l, --links                                       Translate symlinks to/from regular files with a '.rclonelink' extension
+      --max-backlog int                             Maximum number of objects in sync or check backlog (default 10000)
+      --max-duration Duration                       Maximum duration rclone will transfer data for (default 0s)
+      --max-transfer SizeSuffix                     Maximum size of data to transfer (default off)
+  -M, --metadata                                    If set, preserve metadata when copying objects
+      --modify-window Duration                      Max time diff to be considered the same (default 1ns)
+      --multi-thread-chunk-size SizeSuffix          Chunk size for multi-thread downloads / uploads, if not set by filesystem (default 64Mi)
+      --multi-thread-cutoff SizeSuffix              Use multi-thread downloads for files above this size (default 256Mi)
+      --multi-thread-streams int                    Number of streams to use for multi-thread downloads (default 4)
+      --multi-thread-write-buffer-size SizeSuffix   In memory buffer size for writing when in multi-thread mode (default 128Ki)
+      --name-transform stringArray                  Transform paths during the copy process
+      --no-check-dest                               Don't check the destination, copy regardless
+      --no-traverse                                 Don't traverse destination file system on copy
+      --no-update-dir-modtime                       Don't update directory modification times
+      --no-update-modtime                           Don't update destination modtime if files identical
+      --order-by string                             Instructions on how to order the transfers, e.g. 'size,descending'
+      --partial-suffix string                       Add partial-suffix to temporary file name when --inplace is not used (default ".partial")
+      --refresh-times                               Refresh the modtime of remote files
+      --server-side-across-configs                  Allow server-side operations (e.g. copy) to work across different configs
+      --size-only                                   Skip based on size only, not modtime or checksum
+      --streaming-upload-cutoff SizeSuffix          Cutoff for switching to chunked upload if file size is unknown, upload starts after reaching cutoff or when file ends (default 100Ki)
+  -u, --update                                      Skip files that are newer on the destination
+```
+
+### Important Options
+
+Important flags useful for most commands
+
+```text
+  -n, --dry-run         Do a trial run with no permanent changes
+  -i, --interactive     Enable interactive mode
+  -v, --verbose count   Print lots more stuff (repeat for more)
+```
+
+### Filter Options
+
+Flags for filtering directory listings
+
+```text
+      --delete-excluded                     Delete files on dest excluded from sync
+      --exclude stringArray                 Exclude files matching pattern
+      --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
+      --exclude-if-present stringArray      Exclude directories if filename is present
+      --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
+      --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
+  -f, --filter stringArray                  Add a file filtering rule
+      --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
+      --hash-filter string                  Partition filenames by hash k/n or randomly @/n
+      --ignore-case                         Ignore case in filters (case insensitive)
+      --include stringArray                 Include files matching pattern
+      --include-from stringArray            Read file include patterns from file (use - to read from stdin)
+      --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --max-depth int                       If set limits the recursion depth to this (default -1)
+      --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
+      --metadata-exclude stringArray        Exclude metadatas matching pattern
+      --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
+      --metadata-filter stringArray         Add a metadata filtering rule
+      --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
+      --metadata-include stringArray        Include metadatas matching pattern
+      --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
+      --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
+```
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone](/commands/rclone/)	 - Show help for rclone commands, flags and backends.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_cat.md

@@ -0,0 +1,122 @@
+---
+title: "rclone cat"
+description: "Concatenates any files and sends them to stdout."
+versionIntroduced: v1.33
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/cat/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_cat/](https://rclone.org/commands/rclone_cat/)
+# rclone cat
+
+Concatenates any files and sends them to stdout.
+
+## Synopsis
+
+Sends any files to standard output.
+
+You can use it like this to output a single file
+
+```sh
+rclone cat remote:path/to/file
+```
+
+Or like this to output any file in dir or its subdirectories.
+
+```sh
+rclone cat remote:path/to/dir
+```
+
+Or like this to output any .txt files in dir or its subdirectories.
+
+```sh
+rclone --include "*.txt" cat remote:path/to/dir
+```
+
+Use the `--head` flag to print characters only at the start, `--tail` for
+the end and `--offset` and `--count` to print a section in the middle.
+Note that if offset is negative it will count from the end, so
+`--offset -1 --count 1` is equivalent to `--tail 1`.
+
+Use the `--separator` flag to print a separator value between files. Be sure to
+shell-escape special characters. For example, to print a newline between
+files, use:
+
+- bash:
+
+  ```sh
+  rclone --include "*.txt" --separator $'\n' cat remote:path/to/dir
+  ```
+
+- powershell:
+
+  ```powershell
+  rclone --include "*.txt" --separator "`n" cat remote:path/to/dir
+  ```
+
+```
+rclone cat remote:path [flags]
+```
+
+## Options
+
+```
+      --count int          Only print N characters (default -1)
+      --discard            Discard the output instead of printing
+      --head int           Only print the first N characters
+  -h, --help               help for cat
+      --offset int         Start printing at offset N (or from end if -ve)
+      --separator string   Separator to use between objects when printing multiple files
+      --tail int           Only print the last N characters
+```
+
+Options shared with other commands are described next.
+See the [global flags page](/flags/) for global options not listed here.
+
+### Filter Options
+
+Flags for filtering directory listings
+
+```text
+      --delete-excluded                     Delete files on dest excluded from sync
+      --exclude stringArray                 Exclude files matching pattern
+      --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
+      --exclude-if-present stringArray      Exclude directories if filename is present
+      --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
+      --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
+  -f, --filter stringArray                  Add a file filtering rule
+      --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
+      --hash-filter string                  Partition filenames by hash k/n or randomly @/n
+      --ignore-case                         Ignore case in filters (case insensitive)
+      --include stringArray                 Include files matching pattern
+      --include-from stringArray            Read file include patterns from file (use - to read from stdin)
+      --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --max-depth int                       If set limits the recursion depth to this (default -1)
+      --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
+      --metadata-exclude stringArray        Exclude metadatas matching pattern
+      --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
+      --metadata-filter stringArray         Add a metadata filtering rule
+      --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
+      --metadata-include stringArray        Include metadatas matching pattern
+      --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
+      --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
+```
+
+### Listing Options
+
+Flags for listing directories
+
+```text
+      --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
+      --fast-list           Use recursive list if available; uses more memory but fewer transactions
+```
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone](/commands/rclone/)	 - Show help for rclone commands, flags and backends.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_check.md

@@ -0,0 +1,134 @@
+---
+title: "rclone check"
+description: "Checks the files in the source and destination match."
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/check/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_check/](https://rclone.org/commands/rclone_check/)
+# rclone check
+
+Checks the files in the source and destination match.
+
+## Synopsis
+
+Checks the files in the source and destination match.  It compares
+sizes and hashes (MD5 or SHA1) and logs a report of files that don't
+match.  It doesn't alter the source or destination.
+
+For the [crypt](/crypt/) remote there is a dedicated command,
+[cryptcheck](/commands/rclone_cryptcheck/), that are able to check
+the checksums of the encrypted files.
+
+If you supply the `--size-only` flag, it will only compare the sizes not
+the hashes as well.  Use this for a quick check.
+
+If you supply the `--download` flag, it will download the data from
+both remotes and check them against each other on the fly.  This can
+be useful for remotes that don't support hashes or if you really want
+to check all the data.
+
+If you supply the `--checkfile HASH` flag with a valid hash name,
+the `source:path` must point to a text file in the SUM format.
+
+If you supply the `--one-way` flag, it will only check that files in
+the source match the files in the destination, not the other way
+around. This means that extra files in the destination that are not in
+the source will not be detected.
+
+The `--differ`, `--missing-on-dst`, `--missing-on-src`, `--match`
+and `--error` flags write paths, one per line, to the file name (or
+stdout if it is `-`) supplied. What they write is described in the
+help below. For example `--differ` will write all paths which are
+present on both the source and destination but different.
+
+The `--combined` flag will write a file (or stdout) which contains all
+file paths with a symbol and then a space and then the path to tell
+you what happened to it. These are reminiscent of diff files.
+
+- `= path` means path was found in source and destination and was identical
+- `- path` means path was missing on the source, so only in the destination
+- `+ path` means path was missing on the destination, so only in the source
+- `* path` means path was present in source and destination but different.
+- `! path` means there was an error reading or hashing the source or dest.
+
+The default number of parallel checks is 8. See the [--checkers](/docs/#checkers-int)
+option for more information.
+
+```
+rclone check source:path dest:path [flags]
+```
+
+## Options
+
+```
+  -C, --checkfile string        Treat source:path as a SUM file with hashes of given type
+      --combined string         Make a combined report of changes to this file
+      --differ string           Report all non-matching files to this file
+      --download                Check by downloading rather than with hash
+      --error string            Report all files with errors (hashing or reading) to this file
+  -h, --help                    help for check
+      --match string            Report all matching files to this file
+      --missing-on-dst string   Report all files missing from the destination to this file
+      --missing-on-src string   Report all files missing from the source to this file
+      --one-way                 Check one way only, source files must exist on remote
+```
+
+Options shared with other commands are described next.
+See the [global flags page](/flags/) for global options not listed here.
+
+### Check Options
+
+Flags used for check commands
+
+```text
+      --max-backlog int   Maximum number of objects in sync or check backlog (default 10000)
+```
+
+### Filter Options
+
+Flags for filtering directory listings
+
+```text
+      --delete-excluded                     Delete files on dest excluded from sync
+      --exclude stringArray                 Exclude files matching pattern
+      --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
+      --exclude-if-present stringArray      Exclude directories if filename is present
+      --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
+      --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
+  -f, --filter stringArray                  Add a file filtering rule
+      --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
+      --hash-filter string                  Partition filenames by hash k/n or randomly @/n
+      --ignore-case                         Ignore case in filters (case insensitive)
+      --include stringArray                 Include files matching pattern
+      --include-from stringArray            Read file include patterns from file (use - to read from stdin)
+      --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --max-depth int                       If set limits the recursion depth to this (default -1)
+      --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
+      --metadata-exclude stringArray        Exclude metadatas matching pattern
+      --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
+      --metadata-filter stringArray         Add a metadata filtering rule
+      --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
+      --metadata-include stringArray        Include metadatas matching pattern
+      --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
+      --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
+```
+
+### Listing Options
+
+Flags for listing directories
+
+```text
+      --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
+      --fast-list           Use recursive list if available; uses more memory but fewer transactions
+```
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone](/commands/rclone/)	 - Show help for rclone commands, flags and backends.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_checksum.md

@@ -0,0 +1,120 @@
+---
+title: "rclone checksum"
+description: "Checks the files in the destination against a SUM file."
+versionIntroduced: v1.56
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/checksum/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_checksum/](https://rclone.org/commands/rclone_checksum/)
+# rclone checksum
+
+Checks the files in the destination against a SUM file.
+
+## Synopsis
+
+Checks that hashsums of destination files match the SUM file.
+It compares hashes (MD5, SHA1, etc) and logs a report of files which
+don't match.  It doesn't alter the file system.
+
+The sumfile is treated as the source and the dst:path is treated as
+the destination for the purposes of the output.
+
+If you supply the `--download` flag, it will download the data from the remote
+and calculate the content hash on the fly.  This can be useful for remotes
+that don't support hashes or if you really want to check all the data.
+
+Note that hash values in the SUM file are treated as case insensitive.
+
+If you supply the `--one-way` flag, it will only check that files in
+the source match the files in the destination, not the other way
+around. This means that extra files in the destination that are not in
+the source will not be detected.
+
+The `--differ`, `--missing-on-dst`, `--missing-on-src`, `--match`
+and `--error` flags write paths, one per line, to the file name (or
+stdout if it is `-`) supplied. What they write is described in the
+help below. For example `--differ` will write all paths which are
+present on both the source and destination but different.
+
+The `--combined` flag will write a file (or stdout) which contains all
+file paths with a symbol and then a space and then the path to tell
+you what happened to it. These are reminiscent of diff files.
+
+- `= path` means path was found in source and destination and was identical
+- `- path` means path was missing on the source, so only in the destination
+- `+ path` means path was missing on the destination, so only in the source
+- `* path` means path was present in source and destination but different.
+- `! path` means there was an error reading or hashing the source or dest.
+
+The default number of parallel checks is 8. See the [--checkers](/docs/#checkers-int)
+option for more information.
+
+```
+rclone checksum <hash> sumfile dst:path [flags]
+```
+
+## Options
+
+```
+      --combined string         Make a combined report of changes to this file
+      --differ string           Report all non-matching files to this file
+      --download                Check by hashing the contents
+      --error string            Report all files with errors (hashing or reading) to this file
+  -h, --help                    help for checksum
+      --match string            Report all matching files to this file
+      --missing-on-dst string   Report all files missing from the destination to this file
+      --missing-on-src string   Report all files missing from the source to this file
+      --one-way                 Check one way only, source files must exist on remote
+```
+
+Options shared with other commands are described next.
+See the [global flags page](/flags/) for global options not listed here.
+
+### Filter Options
+
+Flags for filtering directory listings
+
+```text
+      --delete-excluded                     Delete files on dest excluded from sync
+      --exclude stringArray                 Exclude files matching pattern
+      --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
+      --exclude-if-present stringArray      Exclude directories if filename is present
+      --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
+      --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
+  -f, --filter stringArray                  Add a file filtering rule
+      --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
+      --hash-filter string                  Partition filenames by hash k/n or randomly @/n
+      --ignore-case                         Ignore case in filters (case insensitive)
+      --include stringArray                 Include files matching pattern
+      --include-from stringArray            Read file include patterns from file (use - to read from stdin)
+      --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --max-depth int                       If set limits the recursion depth to this (default -1)
+      --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
+      --metadata-exclude stringArray        Exclude metadatas matching pattern
+      --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
+      --metadata-filter stringArray         Add a metadata filtering rule
+      --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
+      --metadata-include stringArray        Include metadatas matching pattern
+      --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
+      --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
+```
+
+### Listing Options
+
+Flags for listing directories
+
+```text
+      --default-time Time   Time to show if modtime is unknown for files and directories (default 2000-01-01T00:00:00Z)
+      --fast-list           Use recursive list if available; uses more memory but fewer transactions
+```
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone](/commands/rclone/)	 - Show help for rclone commands, flags and backends.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_cleanup.md

@@ -0,0 +1,49 @@
+---
+title: "rclone cleanup"
+description: "Clean up the remote if possible."
+versionIntroduced: v1.31
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/cleanup/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_cleanup/](https://rclone.org/commands/rclone_cleanup/)
+# rclone cleanup
+
+Clean up the remote if possible.
+
+## Synopsis
+
+Clean up the remote if possible.  Empty the trash or delete old file
+versions. Not supported by all remotes.
+
+```
+rclone cleanup remote:path [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for cleanup
+```
+
+Options shared with other commands are described next.
+See the [global flags page](/flags/) for global options not listed here.
+
+### Important Options
+
+Important flags useful for most commands
+
+```text
+  -n, --dry-run         Do a trial run with no permanent changes
+  -i, --interactive     Enable interactive mode
+  -v, --verbose count   Print lots more stuff (repeat for more)
+```
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone](/commands/rclone/)	 - Show help for rclone commands, flags and backends.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_completion.md

@@ -0,0 +1,40 @@
+---
+title: "rclone completion"
+description: "Output completion script for a given shell."
+aliases:
+  - /commands/rclone_genautocomplete/
+versionIntroduced: v1.33
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/completion/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_completion/](https://rclone.org/commands/rclone_completion/)
+# rclone completion
+
+Output completion script for a given shell.
+
+## Synopsis
+
+Generates a shell completion script for rclone.
+Run with `--help` to list the supported shells.
+
+## Options
+
+```
+  -h, --help   help for completion
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone](/commands/rclone/)	 - Show help for rclone commands, flags and backends.
+* [rclone completion bash](/commands/rclone_completion_bash/)	 - Output bash completion script for rclone.
+* [rclone completion fish](/commands/rclone_completion_fish/)	 - Output fish completion script for rclone.
+* [rclone completion powershell](/commands/rclone_completion_powershell/)	 - Output powershell completion script for rclone.
+* [rclone completion zsh](/commands/rclone_completion_zsh/)	 - Output zsh completion script for rclone.
+
+
+<!-- markdownlint-restore -->