opencode-skills-collection 3.1.11 → 3.1.13

package/bundled-skills/rclone-cli/references/commands/rclone_serve_webdav.md

@@ -0,0 +1,896 @@
+---
+title: "rclone serve webdav"
+description: "Serve remote:path over WebDAV."
+versionIntroduced: v1.39
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/serve/webdav/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_serve_webdav/](https://rclone.org/commands/rclone_serve_webdav/)
+# rclone serve webdav
+
+Serve remote:path over WebDAV.
+
+## Synopsis
+
+Run a basic WebDAV server to serve a remote over HTTP via the
+WebDAV protocol. This can be viewed with a WebDAV client, through a web
+browser, or you can make a remote of type WebDAV to read and write it.
+
+## WebDAV options
+
+### --etag-hash
+
+This controls the ETag header.  Without this flag the ETag will be
+based on the ModTime and Size of the object.
+
+If this flag is set to "auto" then rclone will choose the first
+supported hash on the backend or you can use a named hash such as
+"MD5" or "SHA-1". Use the [hashsum](/commands/rclone_hashsum/) command
+to see the full list.
+
+## Access WebDAV on Windows
+
+WebDAV shared folder can be mapped as a drive on Windows, however the default
+settings prevent it. Windows will fail to connect to the server using insecure
+Basic authentication. It will not even display any login dialog. Windows
+requires SSL / HTTPS connection to be used with Basic. If you try to connect
+via Add Network Location Wizard you will get the following error:
+"The folder you entered does not appear to be valid. Please choose another".
+However, you still can connect if you set the following registry key on a
+client machine:
+`HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters\BasicAuthLevel`
+to 2. The BasicAuthLevel can be set to the following values:
+
+```text
+0 - Basic authentication disabled
+1 - Basic authentication enabled for SSL connections only
+2 - Basic authentication enabled for SSL connections and for non-SSL connections
+```
+
+If required, increase the FileSizeLimitInBytes to a higher value.
+Navigate to the Services interface, then restart the WebClient service.
+
+## Access Office applications on WebDAV
+
+Navigate to following registry
+`HKEY_CURRENT_USER\Software\Microsoft\Office\[14.0/15.0/16.0]\Common\Internet`
+Create a new DWORD BasicAuthLevel with value 2.
+
+```text
+0 - Basic authentication disabled
+1 - Basic authentication enabled for SSL connections only
+2 - Basic authentication enabled for SSL and for non-SSL connections
+```
+
+<https://learn.microsoft.com/en-us/office/troubleshoot/powerpoint/office-opens-blank-from-sharepoint>
+
+## Serving over a unix socket
+
+You can serve the webdav on a unix socket like this:
+
+```console
+rclone serve webdav --addr unix:///tmp/my.socket remote:path
+```
+
+and connect to it like this using rclone and the webdav backend:
+
+```console
+rclone --webdav-unix-socket /tmp/my.socket --webdav-url http://localhost lsf :webdav:
+```
+
+Note that there is no authentication on http protocol - this is expected to be
+done by the permissions on the socket.
+
+## Server options
+
+Use `--addr` to specify which IP address and port the server should
+listen on, eg `--addr 1.2.3.4:8000` or `--addr :8080` to listen to all
+IPs.  By default it only listens on localhost.  You can use port
+:0 to let the OS choose an available port.
+
+If you set `--addr` to listen on a public or LAN accessible IP address
+then using Authentication is advised - see the next section for info.
+
+You can use a unix socket by setting the url to `unix:///path/to/socket`
+or just by using an absolute path name.
+
+`--addr` may be repeated to listen on multiple IPs/ports/sockets.
+Socket activation, described further below, can also be used to accomplish the same.
+
+`--server-read-timeout` and `--server-write-timeout` can be used to
+control the timeouts on the server.  Note that this is the total time
+for a transfer.
+
+`--max-header-bytes` controls the maximum number of bytes the server will
+accept in the HTTP header.
+
+`--baseurl` controls the URL prefix that rclone serves from.  By default
+rclone will serve from the root.  If you used `--baseurl "/rclone"` then
+rclone would serve from a URL starting with "/rclone/".  This is
+useful if you wish to proxy rclone serve.  Rclone automatically
+inserts leading and trailing "/" on `--baseurl`, so `--baseurl "rclone"`,
+`--baseurl "/rclone"` and `--baseurl "/rclone/"` are all treated
+identically.
+
+`--disable-zip` may be set to disable the zipping download option.
+
+### TLS (SSL)
+
+By default this will serve over http.  If you want you can serve over
+https.  You will need to supply the `--cert` and `--key` flags.
+If you wish to do client side certificate validation then you will need to
+supply `--client-ca` also.
+
+`--cert` must be set to the path of a file containing
+either a PEM encoded certificate, or a concatenation of that with the CA
+certificate. `--key` must be set to the path of a file
+with the PEM encoded private key. If setting `--client-ca`,
+it should be set to the path of a file with PEM encoded client certificate
+authority certificates.
+
+`--min-tls-version` is minimum TLS version that is acceptable. Valid
+values are "tls1.0", "tls1.1", "tls1.2" and "tls1.3" (default "tls1.0").
+
+## Socket activation
+
+Instead of the listening addresses specified above, rclone will listen to all
+FDs passed by the service manager, if any (and ignore any arguments passed
+by `--addr`).
+
+This allows rclone to be a socket-activated service.
+It can be configured with .socket and .service unit files as described in
+<https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html>.
+
+Socket activation can be tested ad-hoc with the `systemd-socket-activate`command
+
+```console
+systemd-socket-activate -l 8000 -- rclone serve
+```
+
+This will socket-activate rclone on the first connection to port 8000 over TCP.
+
+### Template
+
+`--template` allows a user to specify a custom markup template for HTTP
+and WebDAV serve functions.  The server exports the following markup
+to be used within the template to server pages:
+
+| Parameter   | Subparameter | Description |
+| :---------- | :----------- | :---------- |
+| .Name       |              | The full path of a file/directory. |
+| .Title      |              | Directory listing of '.Name'. |
+| .Sort       |              | The current sort used. This is changeable via '?sort=' parameter. Possible values: namedirfirst, name, size, time (default namedirfirst). |
+| .Order      |              | The current ordering used. This is changeable via '?order=' parameter. Possible values: asc, desc (default asc). |
+| .Query      |              | Currently unused. |
+| .Breadcrumb |              | Allows for creating a relative navigation. |
+|             | .Link        | The link of the Text relative to the root. |
+|             | .Text        | The Name of the directory. |
+| .Entries    |              | Information about a specific file/directory. |
+|             | .URL         | The url of an entry. |
+|             | .Leaf        | Currently same as '.URL' but intended to be just the name. |
+|             | .IsDir       | Boolean for if an entry is a directory or not. |
+|             | .Size        | Size in bytes of the entry. |
+|             | .ModTime     | The UTC timestamp of an entry. |
+
+The server also makes the following functions available so that they can be used
+within the template. These functions help extend the options for dynamic
+rendering of HTML. They can be used to render HTML based on specific conditions.
+
+| Function   | Description |
+| :---------- | :---------- |
+| afterEpoch  | Returns the time since the epoch for the given time. |
+| contains    | Checks whether a given substring is present or not in a given string. |
+| hasPrefix   | Checks whether the given string begins with the specified prefix. |
+| hasSuffix   | Checks whether the given string end with the specified suffix. |
+
+### Authentication
+
+By default this will serve files without needing a login.
+
+You can either use an htpasswd file which can take lots of users, or
+set a single username and password with the `--user` and `--pass` flags.
+
+Alternatively, you can have the reverse proxy manage authentication and use the
+username provided in the configured header with `--user-from-header`  (e.g., `--user-from-header=x-remote-user`).
+Ensure the proxy is trusted and headers cannot be spoofed, as misconfiguration
+may lead to unauthorized access.
+
+If either of the above authentication methods is not configured and client
+certificates are required by the `--client-ca` flag passed to the server, the
+client certificate common name will be considered as the username.
+
+Use `--htpasswd /path/to/htpasswd` to provide an htpasswd file.  This is
+in standard apache format and supports MD5, SHA1 and BCrypt for basic
+authentication.  Bcrypt is recommended.
+
+To create an htpasswd file:
+
+```console
+touch htpasswd
+htpasswd -B htpasswd user
+htpasswd -B htpasswd anotherUser
+```
+
+The password file can be updated while rclone is running.
+
+Use `--realm` to set the authentication realm.
+
+Use `--salt` to change the password hashing salt from the default.
+
+## VFS - Virtual File System
+
+This command uses the VFS layer. This adapts the cloud storage objects
+that rclone uses into something which looks much more like a disk
+filing system.
+
+Cloud storage objects have lots of properties which aren't like disk
+files - you can't extend them or write to the middle of them, so the
+VFS layer has to deal with that. Because there is no one right way of
+doing this there are various options explained below.
+
+The VFS layer also implements a directory cache - this caches info
+about files and directories (but not the data) in memory.
+
+## VFS Directory Cache
+
+Using the `--dir-cache-time` flag, you can control how long a
+directory should be considered up to date and not refreshed from the
+backend. Changes made through the VFS will appear immediately or
+invalidate the cache.
+
+```text
+    --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
+    --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)
+```
+
+However, changes made directly on the cloud storage by the web
+interface or a different copy of rclone will only be picked up once
+the directory cache expires if the backend configured does not support
+polling for changes. If the backend supports polling, changes will be
+picked up within the polling interval.
+
+You can send a `SIGHUP` signal to rclone for it to flush all
+directory caches, regardless of how old they are.  Assuming only one
+rclone instance is running, you can reset the cache like this:
+
+```console
+kill -SIGHUP $(pidof rclone)
+```
+
+If you configure rclone with a [remote control](/rc) then you can use
+rclone rc to flush the whole directory cache:
+
+```console
+rclone rc vfs/forget
+```
+
+Or individual files or directories:
+
+```console
+rclone rc vfs/forget file=path/to/file dir=path/to/dir
+```
+
+## VFS File Buffering
+
+The `--buffer-size` flag determines the amount of memory,
+that will be used to buffer data in advance.
+
+Each open file will try to keep the specified amount of data in memory
+at all times. The buffered data is bound to one open file and won't be
+shared.
+
+This flag is a upper limit for the used memory per open file.  The
+buffer will only use memory for data that is downloaded but not not
+yet read. If the buffer is empty, only a small amount of memory will
+be used.
+
+The maximum memory used by rclone for buffering can be up to
+`--buffer-size * open files`.
+
+## VFS File Caching
+
+These flags control the VFS file caching options. File caching is
+necessary to make the VFS layer appear compatible with a normal file
+system. It can be disabled at the cost of some compatibility.
+
+For example you'll need to enable VFS caching if you want to read and
+write simultaneously to a file.  See below for more details.
+
+Note that the VFS cache is separate from the cache backend and you may
+find that you need one or the other or both.
+
+```text
+    --cache-dir string                     Directory rclone will use for caching.
+    --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
+    --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
+    --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
+    --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
+    --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
+    --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)
+```
+
+If run with `-vv` rclone will print the location of the file cache.  The
+files are stored in the user cache file area which is OS dependent but
+can be controlled with `--cache-dir` or setting the appropriate
+environment variable.
+
+The cache has 4 different modes selected by `--vfs-cache-mode`.
+The higher the cache mode the more compatible rclone becomes at the
+cost of using disk space.
+
+Note that files are written back to the remote only when they are
+closed and if they haven't been accessed for `--vfs-write-back`
+seconds. If rclone is quit or dies with files that haven't been
+uploaded, these will be uploaded next time rclone is run with the same
+flags.
+
+If using `--vfs-cache-max-size` or `--vfs-cache-min-free-space` note
+that the cache may exceed these quotas for two reasons. Firstly
+because it is only checked every `--vfs-cache-poll-interval`. Secondly
+because open files cannot be evicted from the cache. When
+`--vfs-cache-max-size` or `--vfs-cache-min-free-space` is exceeded,
+rclone will attempt to evict the least accessed files from the cache
+first. rclone will start with files that haven't been accessed for the
+longest. This cache flushing strategy is efficient and more relevant
+files are likely to remain cached.
+
+The `--vfs-cache-max-age` will evict files from the cache
+after the set time since last access has passed. The default value of
+1 hour will start evicting files from cache that haven't been accessed
+for 1 hour. When a cached file is accessed the 1 hour timer is reset to 0
+and will wait for 1 more hour before evicting. Specify the time with
+standard notation, s, m, h, d, w .
+
+You **should not** run two copies of rclone using the same VFS cache
+with the same or overlapping remotes if using `--vfs-cache-mode > off`.
+This can potentially cause data corruption if you do. You can work
+around this by giving each rclone its own cache hierarchy with
+`--cache-dir`. You don't need to worry about this if the remotes in
+use don't overlap.
+
+### --vfs-cache-mode off
+
+In this mode (the default) the cache will read directly from the remote and write
+directly to the remote without caching anything on disk.
+
+This will mean some operations are not possible
+
+- Files can't be opened for both read AND write
+- Files opened for write can't be seeked
+- Existing files opened for write must have O_TRUNC set
+- Files open for read with O_TRUNC will be opened write only
+- Files open for write only will behave as if O_TRUNC was supplied
+- Open modes O_APPEND, O_TRUNC are ignored
+- If an upload fails it can't be retried
+
+### --vfs-cache-mode minimal
+
+This is very similar to "off" except that files opened for read AND
+write will be buffered to disk.  This means that files opened for
+write will be a lot more compatible, but uses the minimal disk space.
+
+These operations are not possible
+
+- Files opened for write only can't be seeked
+- Existing files opened for write must have O_TRUNC set
+- Files opened for write only will ignore O_APPEND, O_TRUNC
+- If an upload fails it can't be retried
+
+### --vfs-cache-mode writes
+
+In this mode files opened for read only are still read directly from
+the remote, write only and read/write files are buffered to disk
+first.
+
+This mode should support all normal file system operations.
+
+If an upload fails it will be retried at exponentially increasing
+intervals up to 1 minute.
+
+### --vfs-cache-mode full
+
+In this mode all reads and writes are buffered to and from disk. When
+data is read from the remote this is buffered to disk as well.
+
+In this mode the files in the cache will be sparse files and rclone
+will keep track of which bits of the files it has downloaded.
+
+So if an application only reads the starts of each file, then rclone
+will only buffer the start of the file. These files will appear to be
+their full size in the cache, but they will be sparse files with only
+the data that has been downloaded present in them.
+
+This mode should support all normal file system operations and is
+otherwise identical to `--vfs-cache-mode` writes.
+
+When reading a file rclone will read `--buffer-size` plus
+`--vfs-read-ahead` bytes ahead.  The `--buffer-size` is buffered in memory
+whereas the `--vfs-read-ahead` is buffered on disk.
+
+When using this mode it is recommended that `--buffer-size` is not set
+too large and `--vfs-read-ahead` is set large if required.
+
+**IMPORTANT** not all file systems support sparse files. In particular
+FAT/exFAT do not. Rclone will perform very badly if the cache
+directory is on a filesystem which doesn't support sparse files and it
+will log an ERROR message if one is detected.
+
+### Fingerprinting
+
+Various parts of the VFS use fingerprinting to see if a local file
+copy has changed relative to a remote file. Fingerprints are made
+from:
+
+- size
+- modification time
+- hash
+
+where available on an object.
+
+On some backends some of these attributes are slow to read (they take
+an extra API call per object, or extra work per object).
+
+For example `hash` is slow with the `local` and `sftp` backends as
+they have to read the entire file and hash it, and `modtime` is slow
+with the `s3`, `swift`, `ftp` and `qinqstor` backends because they
+need to do an extra API call to fetch it.
+
+If you use the `--vfs-fast-fingerprint` flag then rclone will not
+include the slow operations in the fingerprint. This makes the
+fingerprinting less accurate but much faster and will improve the
+opening time of cached files.
+
+If you are running a vfs cache over `local`, `s3` or `swift` backends
+then using this flag is recommended.
+
+Note that if you change the value of this flag, the fingerprints of
+the files in the cache may be invalidated and the files will need to
+be downloaded again.
+
+## VFS Chunked Reading
+
+When rclone reads files from a remote it reads them in chunks. This
+means that rather than requesting the whole file rclone reads the
+chunk specified.  This can reduce the used download quota for some
+remotes by requesting only chunks from the remote that are actually
+read, at the cost of an increased number of requests.
+
+These flags control the chunking:
+
+```text
+    --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
+    --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
+    --vfs-read-chunk-streams int            The number of parallel streams to read at once
+```
+
+The chunking behaves differently depending on the `--vfs-read-chunk-streams` parameter.
+
+### `--vfs-read-chunk-streams` == 0
+
+Rclone will start reading a chunk of size `--vfs-read-chunk-size`,
+and then double the size for each read. When `--vfs-read-chunk-size-limit` is
+specified, and greater than `--vfs-read-chunk-size`, the chunk size for each
+open file will get doubled only until the specified value is reached. If the
+value is "off", which is the default, the limit is disabled and the chunk size
+will grow indefinitely.
+
+With `--vfs-read-chunk-size 100M` and `--vfs-read-chunk-size-limit 0`
+the following parts will be downloaded: 0-100M, 100M-200M, 200M-300M, 300M-400M
+and so on. When `--vfs-read-chunk-size-limit 500M` is specified, the result would
+be 0-100M, 100M-300M, 300M-700M, 700M-1200M, 1200M-1700M and so on.
+
+Setting `--vfs-read-chunk-size` to `0` or "off" disables chunked reading.
+
+The chunks will not be buffered in memory.
+
+### `--vfs-read-chunk-streams` > 0
+
+Rclone reads `--vfs-read-chunk-streams` chunks of size
+`--vfs-read-chunk-size` concurrently. The size for each read will stay
+constant.
+
+This improves performance performance massively on high latency links
+or very high bandwidth links to high performance object stores.
+
+Some experimentation will be needed to find the optimum values of
+`--vfs-read-chunk-size` and `--vfs-read-chunk-streams` as these will
+depend on the backend in use and the latency to the backend.
+
+For high performance object stores (eg AWS S3) a reasonable place to
+start might be `--vfs-read-chunk-streams 16` and
+`--vfs-read-chunk-size 4M`. In testing with AWS S3 the performance
+scaled roughly as the `--vfs-read-chunk-streams` setting.
+
+Similar settings should work for high latency links, but depending on
+the latency they may need more `--vfs-read-chunk-streams` in order to
+get the throughput.
+
+## VFS Performance
+
+These flags may be used to enable/disable features of the VFS for
+performance or other reasons. See also the [chunked reading](#vfs-chunked-reading)
+feature.
+
+In particular S3 and Swift benefit hugely from the `--no-modtime` flag
+(or use `--use-server-modtime` for a slightly different effect) as each
+read of the modification time takes a transaction.
+
+```text
+    --no-checksum     Don't compare checksums on up/download.
+    --no-modtime      Don't read/write the modification time (can speed things up).
+    --no-seek         Don't allow seeking in files.
+    --read-only       Only allow read-only access.
+```
+
+Sometimes rclone is delivered reads or writes out of order. Rather
+than seeking rclone will wait a short time for the in sequence read or
+write to come in. These flags only come into effect when not using an
+on disk cache file.
+
+```text
+    --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
+    --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)
+```
+
+When using VFS write caching (`--vfs-cache-mode` with value writes or full),
+the global flag `--transfers` can be set to adjust the number of parallel uploads
+of modified files from the cache (the related global flag `--checkers` has no
+effect on the VFS).
+
+```text
+    --transfers int  Number of file transfers to run in parallel (default 4)
+```
+
+## Symlinks
+
+By default the VFS does not support symlinks. However this may be
+enabled with either of the following flags:
+
+```text
+    --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
+    --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
+```
+
+As most cloud storage systems do not support symlinks directly, rclone
+stores the symlink as a normal file with a special extension. So a
+file which appears as a symlink `link-to-file.txt` would be stored on
+cloud storage as `link-to-file.txt.rclonelink` and the contents would
+be the path to the symlink destination.
+
+Note that `--links` enables symlink translation globally in rclone -
+this includes any backend which supports the concept (for example the
+local backend). `--vfs-links` just enables it for the VFS layer.
+
+This scheme is compatible with that used by the
+[local backend with the --local-links flag](/local/#symlinks-junction-points).
+
+The `--vfs-links` flag has been designed for `rclone mount`, `rclone
+nfsmount` and `rclone serve nfs`.
+
+It hasn't been tested with the other `rclone serve` commands yet.
+
+A limitation of the current implementation is that it expects the
+caller to resolve sub-symlinks. For example given this directory tree
+
+```text
+.
+├── dir
+│   └── file.txt
+└── linked-dir -> dir
+```
+
+The VFS will correctly resolve `linked-dir` but not
+`linked-dir/file.txt`. This is not a problem for the tested commands
+but may be for other commands.
+
+**Note** that there is an outstanding issue with symlink support
+[issue #8245](https://github.com/rclone/rclone/issues/8245) with duplicate
+files being created when symlinks are moved into directories where
+there is a file of the same name (or vice versa).
+
+## VFS Case Sensitivity
+
+Linux file systems are case-sensitive: two files can differ only
+by case, and the exact case must be used when opening a file.
+
+File systems in modern Windows are case-insensitive but case-preserving:
+although existing files can be opened using any case, the exact case used
+to create the file is preserved and available for programs to query.
+It is not allowed for two files in the same directory to differ only by case.
+
+Usually file systems on macOS are case-insensitive. It is possible to make macOS
+file systems case-sensitive but that is not the default.
+
+The `--vfs-case-insensitive` VFS flag controls how rclone handles these
+two cases. If its value is "false", rclone passes file names to the remote
+as-is. If the flag is "true" (or appears without a value on the
+command line), rclone may perform a "fixup" as explained below.
+
+The user may specify a file name to open/delete/rename/etc with a case
+different than what is stored on the remote. If an argument refers
+to an existing file with exactly the same name, then the case of the existing
+file on the disk will be used. However, if a file name with exactly the same
+name is not found but a name differing only by case exists, rclone will
+transparently fixup the name. This fixup happens only when an existing file
+is requested. Case sensitivity of file names created anew by rclone is
+controlled by the underlying remote.
+
+Note that case sensitivity of the operating system running rclone (the target)
+may differ from case sensitivity of a file system presented by rclone (the source).
+The flag controls whether "fixup" is performed to satisfy the target.
+
+If the flag is not provided on the command line, then its default value depends
+on the operating system where rclone runs: "true" on Windows and macOS, "false"
+otherwise. If the flag is provided without a value, then it is "true".
+
+The `--no-unicode-normalization` flag controls whether a similar "fixup" is
+performed for filenames that differ but are [canonically
+equivalent](https://en.wikipedia.org/wiki/Unicode_equivalence) with respect to
+unicode. Unicode normalization can be particularly helpful for users of macOS,
+which prefers form NFD instead of the NFC used by most other platforms. It is
+therefore highly recommended to keep the default of `false` on macOS, to avoid
+encoding compatibility issues.
+
+In the (probably unlikely) event that a directory has multiple duplicate
+filenames after applying case and unicode normalization, the `--vfs-block-norm-dupes`
+flag allows hiding these duplicates. This comes with a performance tradeoff, as
+rclone will have to scan the entire directory for duplicates when listing a
+directory. For this reason, it is recommended to leave this disabled if not
+needed. However, macOS users may wish to consider using it, as otherwise, if a
+remote directory contains both NFC and NFD versions of the same filename, an odd
+situation will occur: both versions of the file will be visible in the mount,
+and both will appear to be editable, however, editing either version will
+actually result in only the NFD version getting edited under the hood. `--vfs-block-
+norm-dupes` prevents this confusion by detecting this scenario, hiding the
+duplicates, and logging an error, similar to how this is handled in `rclone
+sync`.
+
+## VFS Disk Options
+
+This flag allows you to manually set the statistics about the filing system.
+It can be useful when those statistics cannot be read correctly automatically.
+
+```text
+    --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)
+```
+
+## Alternate report of used bytes
+
+Some backends, most notably S3, do not report the amount of bytes used.
+If you need this information to be available when running `df` on the
+filesystem, then pass the flag `--vfs-used-is-size` to rclone.
+With this flag set, instead of relying on the backend to report this
+information, rclone will scan the whole remote similar to `rclone size`
+and compute the total used space itself.
+
+**WARNING**: Contrary to `rclone size`, this flag ignores filters so that the
+result is accurate. However, this is very inefficient and may cost lots of API
+calls resulting in extra charges. Use it as a last resort and only with caching.
+
+## VFS Metadata
+
+If you use the `--vfs-metadata-extension` flag you can get the VFS to
+expose files which contain the [metadata](/docs/#metadata) as a JSON
+blob. These files will not appear in the directory listing, but can be
+`stat`-ed and opened and once they have been they **will** appear in
+directory listings until the directory cache expires.
+
+Note that some backends won't create metadata unless you pass in the
+`--metadata` flag.
+
+For example, using `rclone mount` with `--metadata --vfs-metadata-extension .metadata`
+we get
+
+```console
+$ ls -l /mnt/
+total 1048577
+-rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
+
+$ cat /mnt/1G.metadata
+{
+        "atime": "2025-03-04T17:34:22.317069787Z",
+        "btime": "2025-03-03T16:03:37.708253808Z",
+        "gid": "1000",
+        "mode": "100664",
+        "mtime": "2025-03-03T16:03:39.640238323Z",
+        "uid": "1000"
+}
+
+$ ls -l /mnt/
+total 1048578
+-rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
+-rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata
+```
+
+If the file has no metadata it will be returned as `{}` and if there
+is an error reading the metadata the error will be returned as
+`{"error":"error string"}`.
+
+## Auth Proxy
+
+If you supply the parameter `--auth-proxy /path/to/program` then
+rclone will use that program to generate backends on the fly which
+then are used to authenticate incoming requests.  This uses a simple
+JSON based protocol with input on STDIN and output on STDOUT.
+
+**PLEASE NOTE:** `--auth-proxy` and `--authorized-keys` cannot be used
+together, if `--auth-proxy` is set the authorized keys option will be
+ignored.
+
+There is an example program
+[bin/test_proxy.py](https://github.com/rclone/rclone/blob/master/bin/test_proxy.py)
+in the rclone source code.
+
+The program's job is to take a `user` and `pass` on the input and turn
+those into the config for a backend on STDOUT in JSON format.  This
+config will have any default parameters for the backend added, but it
+won't use configuration from environment variables or command line
+options - it is the job of the proxy program to make a complete
+config.
+
+This config generated must have this extra parameter
+
+- `_root` - root to use for the backend
+
+And it may have this parameter
+
+- `_obscure` - comma separated strings for parameters to obscure
+
+If password authentication was used by the client, input to the proxy
+process (on STDIN) would look similar to this:
+
+```json
+{
+  "user": "me",
+  "pass": "mypassword"
+}
+```
+
+If public-key authentication was used by the client, input to the
+proxy process (on STDIN) would look similar to this:
+
+```json
+{
+  "user": "me",
+  "public_key": "AAAAB3NzaC1yc2EAAAADAQABAAABAQDuwESFdAe14hVS6omeyX7edc...JQdf"
+}
+```
+
+And as an example return this on STDOUT
+
+```json
+{
+  "type": "sftp",
+  "_root": "",
+  "_obscure": "pass",
+  "user": "me",
+  "pass": "mypassword",
+  "host": "sftp.example.com"
+}
+```
+
+This would mean that an SFTP backend would be created on the fly for
+the `user` and `pass`/`public_key` returned in the output to the host given.  Note
+that since `_obscure` is set to `pass`, rclone will obscure the `pass`
+parameter before creating the backend (which is required for sftp
+backends).
+
+The program can manipulate the supplied `user` in any way, for example
+to make proxy to many different sftp backends, you could make the
+`user` be `user@example.com` and then set the `host` to `example.com`
+in the output and the user to `user`. For security you'd probably want
+to restrict the `host` to a limited list.
+
+Note that an internal cache is keyed on `user` so only use that for
+configuration, don't use `pass` or `public_key`.  This also means that if a user's
+password or public-key is changed the cache will need to expire (which takes 5 mins)
+before it takes effect.
+
+This can be used to build general purpose proxies to any kind of
+backend that rclone supports.
+
+```
+rclone serve webdav remote:path [flags]
+```
+
+## Options
+
+```
+      --addr stringArray                       IPaddress:Port or :Port to bind server to (default 127.0.0.1:8080)
+      --allow-origin string                    Origin which cross-domain request (CORS) can be executed from
+      --auth-proxy string                      A program to use to create the backend from the auth
+      --baseurl string                         Prefix for URLs - leave blank for root
+      --cert string                            TLS PEM key (concatenation of certificate and CA certificate)
+      --client-ca string                       Client certificate authority to verify clients with
+      --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
+      --dir-perms FileMode                     Directory permissions (default 777)
+      --disable-dir-list                       Disable HTML directory list on GET request for a directory
+      --disable-zip                            Disable zip download of directories
+      --etag-hash string                       Which hash to use for the ETag, or auto or blank for off
+      --file-perms FileMode                    File permissions (default 666)
+      --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
+  -h, --help                                   help for webdav
+      --htpasswd string                        A htpasswd file - if not provided no authentication is done
+      --key string                             TLS PEM Private key
+      --link-perms FileMode                    Link permissions (default 666)
+      --max-header-bytes int                   Maximum size of request header (default 4096)
+      --min-tls-version string                 Minimum TLS version that is acceptable (default "tls1.0")
+      --no-checksum                            Don't compare checksums on up/download
+      --no-modtime                             Don't read/write the modification time (can speed things up)
+      --no-seek                                Don't allow seeking in files
+      --pass string                            Password for authentication
+      --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
+      --read-only                              Only allow read-only access
+      --realm string                           Realm for authentication
+      --salt string                            Password hashing salt (default "dlPL2MqE")
+      --server-read-timeout Duration           Timeout for server reading data (default 1h0m0s)
+      --server-write-timeout Duration          Timeout for server writing data (default 1h0m0s)
+      --template string                        User-specified template
+      --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
+      --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
+      --user string                            User name for authentication
+      --user-from-header string                User name from a defined HTTP header
+      --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
+      --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
+      --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
+      --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
+      --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
+      --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
+      --vfs-case-insensitive                   If a file name not found, find a case insensitive match
+      --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
+      --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
+      --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
+      --vfs-metadata-extension string          Set the extension to read metadata from
+      --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
+      --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
+      --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
+      --vfs-read-chunk-streams int             The number of parallel streams to read at once
+      --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
+      --vfs-refresh                            Refreshes the directory cache recursively in the background on start
+      --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
+      --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
+      --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)
+```
+
+Options shared with other commands are described next.
+See the [global flags page](/flags/) for global options not listed here.
+
+### Filter Options
+
+Flags for filtering directory listings
+
+```text
+      --delete-excluded                     Delete files on dest excluded from sync
+      --exclude stringArray                 Exclude files matching pattern
+      --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
+      --exclude-if-present stringArray      Exclude directories if filename is present
+      --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
+      --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
+  -f, --filter stringArray                  Add a file filtering rule
+      --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
+      --hash-filter string                  Partition filenames by hash k/n or randomly @/n
+      --ignore-case                         Ignore case in filters (case insensitive)
+      --include stringArray                 Include files matching pattern
+      --include-from stringArray            Read file include patterns from file (use - to read from stdin)
+      --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --max-depth int                       If set limits the recursion depth to this (default -1)
+      --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
+      --metadata-exclude stringArray        Exclude metadatas matching pattern
+      --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
+      --metadata-filter stringArray         Add a metadata filtering rule
+      --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
+      --metadata-include stringArray        Include metadatas matching pattern
+      --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
+      --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
+      --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
+```
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone serve](/commands/rclone_serve/)	 - Serve a remote over a protocol.
+
+
+<!-- markdownlint-restore -->