opencode-skills-collection 3.1.11 → 3.1.13

package/bundled-skills/rclone-cli/references/commands/rclone_config_encryption_remove.md

@@ -0,0 +1,44 @@
+---
+title: "rclone config encryption remove"
+description: "Remove the config file encryption password"
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/encryption/remove/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_encryption_remove/](https://rclone.org/commands/rclone_config_encryption_remove/)
+# rclone config encryption remove
+
+Remove the config file encryption password
+
+## Synopsis
+
+Remove the config file encryption password
+
+This removes the config file encryption, returning it to un-encrypted.
+
+If `--password-command` is in use, this will be called to supply the old config
+password.
+
+If the config was not encrypted then no error will be returned and
+this command will do nothing.
+
+```
+rclone config encryption remove [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for remove
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config encryption](/commands/rclone_config_encryption/)	 - set, remove and check the encryption for the config file
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_encryption_set.md

@@ -0,0 +1,54 @@
+---
+title: "rclone config encryption set"
+description: "Set or change the config file encryption password"
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/encryption/set/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_encryption_set/](https://rclone.org/commands/rclone_config_encryption_set/)
+# rclone config encryption set
+
+Set or change the config file encryption password
+
+## Synopsis
+
+This command sets or changes the config file encryption password.
+
+If there was no config password set then it sets a new one, otherwise
+it changes the existing config password.
+
+Note that if you are changing an encryption password using
+`--password-command` then this will be called once to decrypt the
+config using the old password and then again to read the new
+password to re-encrypt the config.
+
+When `--password-command` is called to change the password then the
+environment variable `RCLONE_PASSWORD_CHANGE=1` will be set. So if
+changing passwords programmatically you can use the environment
+variable to distinguish which password you must supply.
+
+Alternatively you can remove the password first (with `rclone config
+encryption remove`), then set it again with this command which may be
+easier if you don't mind the unencrypted config file being on the disk
+briefly.
+
+```
+rclone config encryption set [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for set
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config encryption](/commands/rclone_config_encryption/)	 - set, remove and check the encryption for the config file
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_file.md

@@ -0,0 +1,33 @@
+---
+title: "rclone config file"
+description: "Show path of configuration file in use."
+versionIntroduced: v1.38
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/file/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_file/](https://rclone.org/commands/rclone_config_file/)
+# rclone config file
+
+Show path of configuration file in use.
+
+```
+rclone config file [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for file
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_password.md

@@ -0,0 +1,49 @@
+---
+title: "rclone config password"
+description: "Update password in an existing remote."
+versionIntroduced: v1.39
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/password/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_password/](https://rclone.org/commands/rclone_config_password/)
+# rclone config password
+
+Update password in an existing remote.
+
+## Synopsis
+
+Update an existing remote's password. The password
+should be passed in pairs of `key` `password` or as `key=password`.
+The `password` should be passed in in clear (unobscured).
+
+For example, to set password of a remote of name myremote you would do:
+
+```sh
+rclone config password myremote fieldname mypassword
+rclone config password myremote fieldname=mypassword
+```
+
+This command is obsolete now that "config update" and "config create"
+both support obscuring passwords directly.
+
+```
+rclone config password name [key value]+ [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for password
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_paths.md

@@ -0,0 +1,33 @@
+---
+title: "rclone config paths"
+description: "Show paths used for configuration, cache, temp etc."
+versionIntroduced: v1.57
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/paths/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_paths/](https://rclone.org/commands/rclone_config_paths/)
+# rclone config paths
+
+Show paths used for configuration, cache, temp etc.
+
+```
+rclone config paths [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for paths
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_providers.md

@@ -0,0 +1,33 @@
+---
+title: "rclone config providers"
+description: "List in JSON format all the providers and options."
+versionIntroduced: v1.39
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/providers/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_providers/](https://rclone.org/commands/rclone_config_providers/)
+# rclone config providers
+
+List in JSON format all the providers and options.
+
+```
+rclone config providers [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for providers
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_reconnect.md

@@ -0,0 +1,40 @@
+---
+title: "rclone config reconnect"
+description: "Re-authenticates user with remote."
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/reconnect/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_reconnect/](https://rclone.org/commands/rclone_config_reconnect/)
+# rclone config reconnect
+
+Re-authenticates user with remote.
+
+## Synopsis
+
+This reconnects remote: passed in to the cloud storage system.
+
+To disconnect the remote use "rclone config disconnect".
+
+This normally means going through the interactive oauth flow again.
+
+```
+rclone config reconnect remote: [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for reconnect
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_redacted.md

@@ -0,0 +1,45 @@
+---
+title: "rclone config redacted"
+description: "Print redacted (decrypted) config file, or the redacted config for a single remote."
+versionIntroduced: v1.64
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/redacted/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_redacted/](https://rclone.org/commands/rclone_config_redacted/)
+# rclone config redacted
+
+Print redacted (decrypted) config file, or the redacted config for a single remote.
+
+## Synopsis
+
+This prints a redacted copy of the config file, either the
+whole config file or for a given remote.
+
+The config file will be redacted by replacing all passwords and other
+sensitive info with XXX.
+
+This makes the config file suitable for posting online for support.
+
+It should be double checked before posting as the redaction may not be perfect.
+
+```
+rclone config redacted [<remote>] [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for redacted
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_show.md

@@ -0,0 +1,33 @@
+---
+title: "rclone config show"
+description: "Print (decrypted) config file, or the config for a single remote."
+versionIntroduced: v1.38
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/show/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_show/](https://rclone.org/commands/rclone_config_show/)
+# rclone config show
+
+Print (decrypted) config file, or the config for a single remote.
+
+```
+rclone config show [<remote>] [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for show
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_string.md

@@ -0,0 +1,57 @@
+---
+title: "rclone config string"
+description: "Print connection string for a single remote."
+versionIntroduced: v1.72
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/string/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_string/](https://rclone.org/commands/rclone_config_string/)
+# rclone config string
+
+Print connection string for a single remote.
+
+## Synopsis
+
+Print a connection string for a single remote.
+
+The [connection strings](/docs/#connection-strings) can be used
+wherever a remote is needed and can be more convenient than using the
+config file, especially if using the RC API.
+
+Backend parameters may be provided to the command also.
+
+Example:
+
+```sh
+$ rclone config string s3:rclone --s3-no-check-bucket
+:s3,access_key_id=XXX,no_check_bucket,provider=AWS,region=eu-west-2,secret_access_key=YYY:rclone
+```
+
+**NB** the strings are not quoted for use in shells (eg bash,
+powershell, windows cmd). Most will work if enclosed in "double
+quotes", however connection strings that contain double quotes will
+require further quoting which is very shell dependent.
+
+
+
+```
+rclone config string <remote> [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for string
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_touch.md

@@ -0,0 +1,33 @@
+---
+title: "rclone config touch"
+description: "Ensure configuration file exists."
+versionIntroduced: v1.56
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/touch/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_touch/](https://rclone.org/commands/rclone_config_touch/)
+# rclone config touch
+
+Ensure configuration file exists.
+
+```
+rclone config touch [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for touch
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_update.md

@@ -0,0 +1,150 @@
+---
+title: "rclone config update"
+description: "Update options in an existing remote."
+versionIntroduced: v1.39
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/update/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_update/](https://rclone.org/commands/rclone_config_update/)
+# rclone config update
+
+Update options in an existing remote.
+
+## Synopsis
+
+Update an existing remote's options. The options should be passed in
+pairs of `key` `value` or as `key=value`.
+
+For example, to update the env_auth field of a remote of name myremote
+you would do:
+
+```sh
+rclone config update myremote env_auth true
+rclone config update myremote env_auth=true
+```
+
+If the remote uses OAuth the token will be updated, if you don't
+require this add an extra parameter thus:
+
+```sh
+rclone config update myremote env_auth=true config_refresh_token=false
+```
+
+Note that if the config process would normally ask a question the
+default is taken (unless `--non-interactive` is used).  Each time
+that happens rclone will print or DEBUG a message saying how to
+affect the value taken.
+
+If any of the parameters passed is a password field, then rclone will
+automatically obscure them if they aren't already obscured before
+putting them in the config file.
+
+**NB** If the password parameter is 22 characters or longer and
+consists only of base64 characters then rclone can get confused about
+whether the password is already obscured or not and put unobscured
+passwords into the config file. If you want to be 100% certain that
+the passwords get obscured then use the `--obscure` flag, or if you
+are 100% certain you are already passing obscured passwords then use
+`--no-obscure`.  You can also set obscured passwords using the
+`rclone config password` command.
+
+The flag `--non-interactive` is for use by applications that wish to
+configure rclone themselves, rather than using rclone's text based
+configuration questions. If this flag is set, and rclone needs to ask
+the user a question, a JSON blob will be returned with the question in
+it.
+
+This will look something like (some irrelevant detail removed):
+
+```json
+{
+  "State": "*oauth-islocal,teamdrive,,",
+  "Option": {
+    "Name": "config_is_local",
+    "Help": "Use web browser to automatically authenticate rclone with remote?\n * Say Y if the machine running rclone has a web browser you can use\n * Say N if running rclone on a (remote) machine without web browser access\nIf not sure try Y. If Y failed, try N.\n",
+    "Default": true,
+    "Examples": [
+      {
+        "Value": "true",
+        "Help": "Yes"
+      },
+      {
+        "Value": "false",
+        "Help": "No"
+      }
+    ],
+    "Required": false,
+    "IsPassword": false,
+    "Type": "bool",
+    "Exclusive": true,
+  },
+  "Error": "",
+}
+```
+
+The format of `Option` is the same as returned by `rclone config
+providers`. The question should be asked to the user and returned to
+rclone as the `--result` option along with the `--state` parameter.
+
+The keys of `Option` are used as follows:
+
+- `Name` - name of variable - show to user
+- `Help` - help text. Hard wrapped at 80 chars. Any URLs should be clicky.
+- `Default` - default value - return this if the user just wants the default.
+- `Examples` - the user should be able to choose one of these
+- `Required` - the value should be non-empty
+- `IsPassword` - the value is a password and should be edited as such
+- `Type` - type of value, eg `bool`, `string`, `int` and others
+- `Exclusive` - if set no free-form entry allowed only the `Examples`
+- Irrelevant keys `Provider`, `ShortOpt`, `Hide`, `NoPrefix`, `Advanced`
+
+If `Error` is set then it should be shown to the user at the same
+time as the question.
+
+```sh
+rclone config update name --continue --state "*oauth-islocal,teamdrive,," --result "true"
+```
+
+Note that when using `--continue` all passwords should be passed in
+the clear (not obscured). Any default config values should be passed
+in with each invocation of `--continue`.
+
+At the end of the non interactive process, rclone will return a result
+with `State` as empty string.
+
+If `--all` is passed then rclone will ask all the config questions,
+not just the post config questions. Any parameters are used as
+defaults for questions as usual.
+
+Note that `bin/config.py` in the rclone source implements this protocol
+as a readable demonstration.
+
+```
+rclone config update name [key value]+ [flags]
+```
+
+## Options
+
+```
+      --all               Ask the full set of config questions
+      --continue          Continue the configuration process with an answer
+  -h, --help              help for update
+      --no-obscure        Force any passwords not to be obscured
+      --no-output         Don't provide any output
+      --non-interactive   Don't interact with user and return questions
+      --obscure           Force any passwords to be obscured
+      --result string     Result - use with --continue
+      --state string      State - use with --continue
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->

package/bundled-skills/rclone-cli/references/commands/rclone_config_userinfo.md

@@ -0,0 +1,38 @@
+---
+title: "rclone config userinfo"
+description: "Prints info about logged in user of remote."
+# autogenerated - DO NOT EDIT, instead edit the source code in cmd/config/userinfo/ and as part of making a release run "make commanddocs"
+---
+
+> **Official documentation:** [https://rclone.org/commands/rclone_config_userinfo/](https://rclone.org/commands/rclone_config_userinfo/)
+# rclone config userinfo
+
+Prints info about logged in user of remote.
+
+## Synopsis
+
+This prints the details of the person logged in to the cloud storage
+system.
+
+```
+rclone config userinfo remote: [flags]
+```
+
+## Options
+
+```
+  -h, --help   help for userinfo
+      --json   Format output as JSON
+```
+
+See the [global flags page](/flags/) for global options not listed here.
+
+## See Also
+
+<!-- markdownlint-capture -->
+<!-- markdownlint-disable ul-style line-length -->
+
+* [rclone config](/commands/rclone_config/)	 - Enter an interactive configuration session.
+
+
+<!-- markdownlint-restore -->