jscad-electronics 0.0.188 → 0.0.190

package/dist/vanilla.d.ts

@@ -1,8 +1,9 @@
+import { MaterialOptions } from 'jscad-fiber';
 import { BufferGeometry } from 'three';
 import * as jscadModeling from '@jscad/modeling';
 import * as react_jsx_runtime from 'react/jsx-runtime';
-import { NemaMotorModelPropsInput, HexSocketBoltModelPropsInput, SheetMetalModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, WormGearModelPropsInput, HexBoltModelPropsInput } from '@tscircuit/modelprinter';
 import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
+import { SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, SheetMetalModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
 
 type VNode = {
     type: any;
@@ -17,6 +18,7 @@ type Color = string | [number, number, number] | [number, number, number, number
 type ColoredGeom = {
     geom: any;
     color?: Color;
+    material?: MaterialOptions;
 };
 type RenderResult = {
     geometries: ColoredGeom[];
@@ -24,20 +26,51 @@ type RenderResult = {
 
 declare function convertCSGToThreeGeom(csg: any): BufferGeometry;
 
-type NemaMotorProps = NemaMotorModelPropsInput & {
-    bodyColor?: string;
-    capColor?: string;
-    shaftColor?: string;
-    screwColor?: string;
-};
-type NemaFrameMotorProps = Omit<NemaMotorProps, "nemaSize">;
-/** Mounting face at Z=0, body along -Z, shaft along +Z; all lengths in mm.
- * Parameters follow the modelprinter NEMA contract; JSCAD builds all geometry.
+/** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
+interface SpurGearMesh {
+    positions: number[];
+    indices: number[];
+}
+/**
+ * An external involute spur gear with its lower face at Z=0. Tooth centers
+ * start on +X and rotate counterclockwise with phase. The optional hub extends
+ * above the upper face, and the round bore passes through both gear and hub.
+ * Flanks are sampled involutes; tips and root valleys follow circular arcs.
+ * Below the base circle the flanks extend radially, without a generated
+ * trochoidal root fillet or cutter undercut. No CSG or renderer is required.
  */
-declare function NemaMotor({ bodyColor, capColor, shaftColor, screwColor, ...props }: NemaMotorProps): react_jsx_runtime.JSX.Element;
-declare const NEMA8: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
-declare const NEMA17: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
-declare const NEMA23: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+declare function createSpurGearMesh(input: SpurGearModelPropsInput): SpurGearMesh;
+
+type HelicalGearMesh = SpurGearMesh;
+/**
+ * Twisted transverse involute teeth from Z=0 to faceWidth, with a stationary
+ * round bore and optional hub. Zero helix angle reproduces the spur mesh.
+ */
+declare function createHelicalGearMesh(input: HelicalGearModelPropsInput): HelicalGearMesh;
+
+type HelicalGearProps = HelicalGearModelPropsInput & {
+    color?: string;
+};
+/** Axis +Z, lower face Z=0; optional hub extends above the gear face. */
+declare function createHelicalGearGeom(input: HelicalGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function HelicalGear({ color, ...props }: HelicalGearProps): react_jsx_runtime.JSX.Element;
+
+interface HexBoltMeshOptions {
+    radialSegments?: number;
+    threadStepsPerTurn?: number;
+}
+/** Outward-oriented, welded indexed surface, in millimeters. */
+interface HexBoltMesh {
+    positions: number[];
+    indices: number[];
+}
+declare function createHexBoltMesh(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): HexBoltMesh;
+
+type HexBoltProps = HexBoltModelPropsInput & {
+    color?: string;
+};
+declare function createHexBoltGeom(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function HexBolt({ color, ...props }: HexBoltProps): react_jsx_runtime.JSX.Element;
 
 /** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
 interface HexSocketBoltMesh {
@@ -59,6 +92,21 @@ type HexSocketBoltProps = HexSocketBoltModelPropsInput & {
 declare function createHexSocketBoltGeom(input: HexSocketBoltModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function HexSocketBolt({ color, ...props }: HexSocketBoltProps): react_jsx_runtime.JSX.Element;
 
+type NemaMotorProps = NemaMotorModelPropsInput & {
+    bodyColor?: string;
+    capColor?: string;
+    shaftColor?: string;
+    screwColor?: string;
+};
+type NemaFrameMotorProps = Omit<NemaMotorProps, "nemaSize">;
+/** Mounting face at Z=0, body along -Z, shaft along +Z; all lengths in mm.
+ * Parameters follow the modelprinter NEMA contract; JSCAD builds all geometry.
+ */
+declare function NemaMotor({ bodyColor, capColor, shaftColor, screwColor, ...props }: NemaMotorProps): react_jsx_runtime.JSX.Element;
+declare const NEMA8: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+declare const NEMA17: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+declare const NEMA23: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+
 interface SheetMetalMesh {
     positions: number[];
     indices: number[];
@@ -78,35 +126,6 @@ type SheetMetalProps = SheetMetalModelPropsInput & {
 declare function createSheetMetalGeom(input: SheetMetalModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function SheetMetal({ color, ...props }: SheetMetalProps): react_jsx_runtime.JSX.Element;
 
-/** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
-interface SpurGearMesh {
-    positions: number[];
-    indices: number[];
-}
-/**
- * An external involute spur gear with its lower face at Z=0. Tooth centers
- * start on +X and rotate counterclockwise with phase. The optional hub extends
- * above the upper face, and the round bore passes through both gear and hub.
- * Flanks are sampled involutes; tips and root valleys follow circular arcs.
- * Below the base circle the flanks extend radially, without a generated
- * trochoidal root fillet or cutter undercut. No CSG or renderer is required.
- */
-declare function createSpurGearMesh(input: SpurGearModelPropsInput): SpurGearMesh;
-
-type HelicalGearMesh = SpurGearMesh;
-/**
- * Twisted transverse involute teeth from Z=0 to faceWidth, with a stationary
- * round bore and optional hub. Zero helix angle reproduces the spur mesh.
- */
-declare function createHelicalGearMesh(input: HelicalGearModelPropsInput): HelicalGearMesh;
-
-type HelicalGearProps = HelicalGearModelPropsInput & {
-    color?: string;
-};
-/** Axis +Z, lower face Z=0; optional hub extends above the gear face. */
-declare function createHelicalGearGeom(input: HelicalGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function HelicalGear({ color, ...props }: HelicalGearProps): react_jsx_runtime.JSX.Element;
-
 type SpurGearProps = SpurGearModelPropsInput & {
     color?: string;
 };
@@ -134,23 +153,6 @@ type WormGearProps = WormGearModelPropsInput & {
 declare function createWormGearGeom(input: WormGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function WormGear({ color, ...props }: WormGearProps): react_jsx_runtime.JSX.Element;
 
-interface HexBoltMeshOptions {
-    radialSegments?: number;
-    threadStepsPerTurn?: number;
-}
-/** Outward-oriented, welded indexed surface, in millimeters. */
-interface HexBoltMesh {
-    positions: number[];
-    indices: number[];
-}
-declare function createHexBoltMesh(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): HexBoltMesh;
-
-type HexBoltProps = HexBoltModelPropsInput & {
-    color?: string;
-};
-declare function createHexBoltGeom(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function HexBolt({ color, ...props }: HexBoltProps): react_jsx_runtime.JSX.Element;
-
 declare function getJscadModelForFootprint(footprint: string, jscad: typeof jscadModeling): RenderResult;
 declare function getJscadModelForFootprintWithPads(footprint: string, jscad: typeof jscadModeling): RenderResult;
 declare function createJSCADRenderer(jscad: typeof jscadModeling): {