jscad-electronics 0.0.188 → 0.0.190

package/dist/index.d.ts

@@ -1,7 +1,7 @@
 import * as react_jsx_runtime from 'react/jsx-runtime';
 import { AnyCircuitElement, PcbSmtPad, PcbPlatedHole } from 'circuit-json';
-import { NemaMotorModelPropsInput, HexSocketBoltModelPropsInput, SheetMetalModelPropsInput, SpurGearModelPropsInput, HelicalGearModelPropsInput, WormGearModelPropsInput, HexBoltModelPropsInput } from '@tscircuit/modelprinter';
 import * as _jscad_modeling_src_geometries_types from '@jscad/modeling/src/geometries/types';
+import { SpurGearModelPropsInput, HelicalGearModelPropsInput, HexBoltModelPropsInput, HexSocketBoltModelPropsInput, NemaMotorModelPropsInput, SheetMetalModelPropsInput, WormGearModelPropsInput } from '@tscircuit/modelprinter';
 
 declare const A01005: ({ color }: {
     color?: string | undefined;
@@ -829,128 +829,6 @@ interface ScreenProps {
 declare const Screen: ({ width, height, thickness, bezelInset, bezelDepth, screenColor, bezelColor, screenWidth, screenHeight, offset, }: ScreenProps) => react_jsx_runtime.JSX.Element;
 declare const Display: ({ width, height, thickness, bezelInset, bezelDepth, screenColor, bezelColor, screenWidth, screenHeight, offset, }: ScreenProps) => react_jsx_runtime.JSX.Element;
 
-type Rotation3 = [number | string, number | string, number | string];
-type FlexScreenOrientation = "sitsFlat" | "sitsFlatBelowBoard" | "foldedToFaceAboveBoard" | "foldedToFaceBelowBoard" | "foldedToRightAngleAboveBoard" | "foldedToRightAngleBelowBoard";
-type FlexScreenAspectRatio = number | `${number}:${number}` | readonly [number, number];
-interface FlexScreenProps {
-    /** Explicit screen width. If height is omitted, it is derived from the ratio. */
-    width?: number;
-    /** Explicit screen height. If width is omitted, it is derived from the ratio. */
-    height?: number;
-    /** Screen diagonal. Used with the ratio unless one other dimension is supplied. */
-    diagonal?: number;
-    /** Width-to-height ratio. Accepts 1.777, "16:9", or [16, 9]. */
-    aspectRatio?: FlexScreenAspectRatio;
-    /** Alias for aspectRatio. aspectRatio takes precedence when both are supplied. */
-    ratio?: FlexScreenAspectRatio;
-    /** Diagonal used when width, height, and diagonal are all omitted. */
-    defaultDiagonal?: number;
-    orientation?: FlexScreenOrientation;
-    /** Boolean orientation shortcuts for footprint/configuration builders. */
-    sitsFlat?: boolean;
-    sitsFlatBelowBoard?: boolean;
-    foldedToFaceAboveBoard?: boolean;
-    foldedToFaceBelowBoard?: boolean;
-    /** Concise aliases for the 180-degree face-above/face-below folds. */
-    foldsAboveBoard?: boolean;
-    foldsBelowBoard?: boolean;
-    foldedToRightAngleAboveBoard?: boolean;
-    foldedToRightAngleBelowBoard?: boolean;
-    screenThickness?: number;
-    bezelInset?: number;
-    bezelDepth?: number;
-    activeAreaWidth?: number;
-    activeAreaHeight?: number;
-    screenColor?: string;
-    bezelColor?: string;
-    showScreen?: boolean;
-    /** Centerline length of the modeled cable route. */
-    flexCableLength?: number;
-    /** Cable body width. The connector end widens when its contacts need more room. */
-    flexCableWidth?: number;
-    flexCableThickness?: number;
-    flexCableColor?: string;
-    /** Number of connector contacts, matching FPC.pinCount. */
-    pinCount?: number;
-    /** Center-to-center connector contact spacing, matching FPC.pitch. */
-    pitch?: number;
-    /** Connector contact width, matching FPC.padWidth (footprinter pw). */
-    padWidth?: number;
-    /** Exposed contact length, matching FPC.padLength (footprinter pl). */
-    padLength?: number;
-    /** Straight length of the widened connector end, before the taper. */
-    tailLength?: number;
-    /** Length of the transition from the widened tail to the cable body. */
-    taperLength?: number;
-    /** @deprecated Use pinCount. */
-    conductorCount?: number;
-    /** @deprecated Use pitch. */
-    conductorPitch?: number;
-    /** @deprecated Use padWidth. */
-    conductorWidth?: number;
-    conductorThickness?: number;
-    conductorColor?: string;
-    cableEdgeMargin?: number;
-    /** @deprecated Use padLength. */
-    exposedContactLength?: number;
-    showConductors?: boolean;
-    showFlexCable?: boolean;
-    showStiffeners?: boolean;
-    stiffenerLength?: number;
-    stiffenerThickness?: number;
-    stiffenerColor?: string;
-    /** Radius of the 90-degree cable bend in right-angle presets. */
-    bendRadius?: number;
-    /** Number of straight segments used to approximate a 90-degree bend. */
-    bendSegments?: number;
-    /** Straight cable length after the bend before the screen attachment. */
-    rightAngleVerticalLead?: number;
-    /** Screen backplane distance above the board for a 180-degree upward fold. */
-    distanceAboveBoard?: number;
-    /** Screen backplane distance below the board for a 180-degree downward fold. */
-    distanceBelowBoard?: number;
-    /** Straight distance from the connector to the start of a 180-degree fold. */
-    foldDistanceFromConnector?: number;
-    /** Maximum distance the 180-degree loop extends beyond the fold start. */
-    foldOutset?: number;
-    /** Number of straight segments used to approximate a 180-degree fold. */
-    foldSegments?: number;
-    screenGap?: number;
-    /** Board reference used to place above/below presets. The board is not rendered. */
-    boardTopZ?: number;
-    boardThickness?: number;
-    boardClearance?: number;
-    cableStartX?: number;
-    cableStartY?: number;
-    /** Overrides the preset-derived cable centerline Z at the connector end. */
-    cableStartZ?: number;
-    cableLateralOffset?: number;
-    /** Added after the orientation preset computes the screen attachment pose. */
-    screenOffset?: {
-        x?: number;
-        y?: number;
-        z?: number;
-    };
-    /** Replaces the orientation preset's screen rotation. */
-    screenRotation?: Rotation3;
-    /** Rotates the complete assembly around its cable origin. */
-    rotation?: Rotation3;
-    /** Translates the complete assembly after rotation. */
-    offset?: {
-        x?: number;
-        y?: number;
-        z?: number;
-    };
-}
-interface ResolvedFlexScreenSize {
-    width: number;
-    height: number;
-    diagonal: number;
-    aspectRatio: number;
-}
-declare const resolveFlexScreenSize: ({ width, height, diagonal, aspectRatio, ratio, defaultDiagonal, }: Pick<FlexScreenProps, "width" | "height" | "diagonal" | "aspectRatio" | "ratio" | "defaultDiagonal">) => ResolvedFlexScreenSize;
-declare const FlexScreen: (props: FlexScreenProps) => react_jsx_runtime.JSX.Element;
-
 interface JSTZH1_5mmProps {
     numPins?: number;
     showPins?: boolean;
@@ -1348,20 +1226,173 @@ declare const MelfResistor: ({ size, footprint, }: {
     footprint?: string;
 }) => react_jsx_runtime.JSX.Element;
 
-type NemaMotorProps = NemaMotorModelPropsInput & {
-    bodyColor?: string;
-    capColor?: string;
-    shaftColor?: string;
-    screwColor?: string;
-};
-type NemaFrameMotorProps = Omit<NemaMotorProps, "nemaSize">;
-/** Mounting face at Z=0, body along -Z, shaft along +Z; all lengths in mm.
- * Parameters follow the modelprinter NEMA contract; JSCAD builds all geometry.
+type Rotation3 = [number | string, number | string, number | string];
+type FlexScreenOrientation = "sitsFlat" | "sitsFlatBelowBoard" | "foldedToFaceAboveBoard" | "foldedToFaceBelowBoard" | "foldedToRightAngleAboveBoard" | "foldedToRightAngleBelowBoard";
+type FlexScreenAspectRatio = number | `${number}:${number}` | readonly [number, number];
+interface FlexScreenProps {
+    /** Explicit screen width. If height is omitted, it is derived from the ratio. */
+    width?: number;
+    /** Explicit screen height. If width is omitted, it is derived from the ratio. */
+    height?: number;
+    /** Screen diagonal. Used with the ratio unless one other dimension is supplied. */
+    diagonal?: number;
+    /** Width-to-height ratio. Accepts 1.777, "16:9", or [16, 9]. */
+    aspectRatio?: FlexScreenAspectRatio;
+    /** Alias for aspectRatio. aspectRatio takes precedence when both are supplied. */
+    ratio?: FlexScreenAspectRatio;
+    /** Diagonal used when width, height, and diagonal are all omitted. */
+    defaultDiagonal?: number;
+    orientation?: FlexScreenOrientation;
+    /** Boolean orientation shortcuts for footprint/configuration builders. */
+    sitsFlat?: boolean;
+    sitsFlatBelowBoard?: boolean;
+    foldedToFaceAboveBoard?: boolean;
+    foldedToFaceBelowBoard?: boolean;
+    /** Concise aliases for the 180-degree face-above/face-below folds. */
+    foldsAboveBoard?: boolean;
+    foldsBelowBoard?: boolean;
+    foldedToRightAngleAboveBoard?: boolean;
+    foldedToRightAngleBelowBoard?: boolean;
+    screenThickness?: number;
+    bezelInset?: number;
+    bezelDepth?: number;
+    activeAreaWidth?: number;
+    activeAreaHeight?: number;
+    screenColor?: string;
+    bezelColor?: string;
+    showScreen?: boolean;
+    /** Centerline length of the modeled cable route. */
+    flexCableLength?: number;
+    /** Cable body width. The connector end widens when its contacts need more room. */
+    flexCableWidth?: number;
+    flexCableThickness?: number;
+    flexCableColor?: string;
+    /** Number of connector contacts, matching FPC.pinCount. */
+    pinCount?: number;
+    /** Center-to-center connector contact spacing, matching FPC.pitch. */
+    pitch?: number;
+    /** Connector contact width, matching FPC.padWidth (footprinter pw). */
+    padWidth?: number;
+    /** Exposed contact length, matching FPC.padLength (footprinter pl). */
+    padLength?: number;
+    /** Straight length of the widened connector end, before the taper. */
+    tailLength?: number;
+    /** Length of the transition from the widened tail to the cable body. */
+    taperLength?: number;
+    /** @deprecated Use pinCount. */
+    conductorCount?: number;
+    /** @deprecated Use pitch. */
+    conductorPitch?: number;
+    /** @deprecated Use padWidth. */
+    conductorWidth?: number;
+    conductorThickness?: number;
+    conductorColor?: string;
+    cableEdgeMargin?: number;
+    /** @deprecated Use padLength. */
+    exposedContactLength?: number;
+    showConductors?: boolean;
+    showFlexCable?: boolean;
+    showStiffeners?: boolean;
+    stiffenerLength?: number;
+    stiffenerThickness?: number;
+    stiffenerColor?: string;
+    /** Radius of the 90-degree cable bend in right-angle presets. */
+    bendRadius?: number;
+    /** Number of straight segments used to approximate a 90-degree bend. */
+    bendSegments?: number;
+    /** Straight cable length after the bend before the screen attachment. */
+    rightAngleVerticalLead?: number;
+    /** Screen backplane distance above the board for a 180-degree upward fold. */
+    distanceAboveBoard?: number;
+    /** Screen backplane distance below the board for a 180-degree downward fold. */
+    distanceBelowBoard?: number;
+    /** Straight distance from the connector to the start of a 180-degree fold. */
+    foldDistanceFromConnector?: number;
+    /** Maximum distance the 180-degree loop extends beyond the fold start. */
+    foldOutset?: number;
+    /** Number of straight segments used to approximate a 180-degree fold. */
+    foldSegments?: number;
+    screenGap?: number;
+    /** Board reference used to place above/below presets. The board is not rendered. */
+    boardTopZ?: number;
+    boardThickness?: number;
+    boardClearance?: number;
+    cableStartX?: number;
+    cableStartY?: number;
+    /** Overrides the preset-derived cable centerline Z at the connector end. */
+    cableStartZ?: number;
+    cableLateralOffset?: number;
+    /** Added after the orientation preset computes the screen attachment pose. */
+    screenOffset?: {
+        x?: number;
+        y?: number;
+        z?: number;
+    };
+    /** Replaces the orientation preset's screen rotation. */
+    screenRotation?: Rotation3;
+    /** Rotates the complete assembly around its cable origin. */
+    rotation?: Rotation3;
+    /** Translates the complete assembly after rotation. */
+    offset?: {
+        x?: number;
+        y?: number;
+        z?: number;
+    };
+}
+interface ResolvedFlexScreenSize {
+    width: number;
+    height: number;
+    diagonal: number;
+    aspectRatio: number;
+}
+declare const resolveFlexScreenSize: ({ width, height, diagonal, aspectRatio, ratio, defaultDiagonal, }: Pick<FlexScreenProps, "width" | "height" | "diagonal" | "aspectRatio" | "ratio" | "defaultDiagonal">) => ResolvedFlexScreenSize;
+declare const FlexScreen: (props: FlexScreenProps) => react_jsx_runtime.JSX.Element;
+
+/** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
+interface SpurGearMesh {
+    positions: number[];
+    indices: number[];
+}
+/**
+ * An external involute spur gear with its lower face at Z=0. Tooth centers
+ * start on +X and rotate counterclockwise with phase. The optional hub extends
+ * above the upper face, and the round bore passes through both gear and hub.
+ * Flanks are sampled involutes; tips and root valleys follow circular arcs.
+ * Below the base circle the flanks extend radially, without a generated
+ * trochoidal root fillet or cutter undercut. No CSG or renderer is required.
  */
-declare function NemaMotor({ bodyColor, capColor, shaftColor, screwColor, ...props }: NemaMotorProps): react_jsx_runtime.JSX.Element;
-declare const NEMA8: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
-declare const NEMA17: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
-declare const NEMA23: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+declare function createSpurGearMesh(input: SpurGearModelPropsInput): SpurGearMesh;
+
+type HelicalGearMesh = SpurGearMesh;
+/**
+ * Twisted transverse involute teeth from Z=0 to faceWidth, with a stationary
+ * round bore and optional hub. Zero helix angle reproduces the spur mesh.
+ */
+declare function createHelicalGearMesh(input: HelicalGearModelPropsInput): HelicalGearMesh;
+
+type HelicalGearProps = HelicalGearModelPropsInput & {
+    color?: string;
+};
+/** Axis +Z, lower face Z=0; optional hub extends above the gear face. */
+declare function createHelicalGearGeom(input: HelicalGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
+declare function HelicalGear({ color, ...props }: HelicalGearProps): react_jsx_runtime.JSX.Element;
+
+interface HexBoltMeshOptions {
+    radialSegments?: number;
+    threadStepsPerTurn?: number;
+}
+/** Outward-oriented, welded indexed surface, in millimeters. */
+interface HexBoltMesh {
+    positions: number[];
+    indices: number[];
+}
+declare function createHexBoltMesh(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): HexBoltMesh;
+
+type HexBoltProps = HexBoltModelPropsInput & {
+    color?: string;
+};
+declare function createHexBoltGeom(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
+declare function HexBolt({ color, ...props }: HexBoltProps): react_jsx_runtime.JSX.Element;
 
 /** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
 interface HexSocketBoltMesh {
@@ -1383,6 +1414,21 @@ type HexSocketBoltProps = HexSocketBoltModelPropsInput & {
 declare function createHexSocketBoltGeom(input: HexSocketBoltModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function HexSocketBolt({ color, ...props }: HexSocketBoltProps): react_jsx_runtime.JSX.Element;
 
+type NemaMotorProps = NemaMotorModelPropsInput & {
+    bodyColor?: string;
+    capColor?: string;
+    shaftColor?: string;
+    screwColor?: string;
+};
+type NemaFrameMotorProps = Omit<NemaMotorProps, "nemaSize">;
+/** Mounting face at Z=0, body along -Z, shaft along +Z; all lengths in mm.
+ * Parameters follow the modelprinter NEMA contract; JSCAD builds all geometry.
+ */
+declare function NemaMotor({ bodyColor, capColor, shaftColor, screwColor, ...props }: NemaMotorProps): react_jsx_runtime.JSX.Element;
+declare const NEMA8: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+declare const NEMA17: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+declare const NEMA23: (props: NemaFrameMotorProps) => react_jsx_runtime.JSX.Element;
+
 interface SheetMetalMesh {
     positions: number[];
     indices: number[];
@@ -1402,35 +1448,6 @@ type SheetMetalProps = SheetMetalModelPropsInput & {
 declare function createSheetMetalGeom(input: SheetMetalModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function SheetMetal({ color, ...props }: SheetMetalProps): react_jsx_runtime.JSX.Element;
 
-/** Indexed triangles, counterclockwise from outside; millimeters, Z up. */
-interface SpurGearMesh {
-    positions: number[];
-    indices: number[];
-}
-/**
- * An external involute spur gear with its lower face at Z=0. Tooth centers
- * start on +X and rotate counterclockwise with phase. The optional hub extends
- * above the upper face, and the round bore passes through both gear and hub.
- * Flanks are sampled involutes; tips and root valleys follow circular arcs.
- * Below the base circle the flanks extend radially, without a generated
- * trochoidal root fillet or cutter undercut. No CSG or renderer is required.
- */
-declare function createSpurGearMesh(input: SpurGearModelPropsInput): SpurGearMesh;
-
-type HelicalGearMesh = SpurGearMesh;
-/**
- * Twisted transverse involute teeth from Z=0 to faceWidth, with a stationary
- * round bore and optional hub. Zero helix angle reproduces the spur mesh.
- */
-declare function createHelicalGearMesh(input: HelicalGearModelPropsInput): HelicalGearMesh;
-
-type HelicalGearProps = HelicalGearModelPropsInput & {
-    color?: string;
-};
-/** Axis +Z, lower face Z=0; optional hub extends above the gear face. */
-declare function createHelicalGearGeom(input: HelicalGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
-declare function HelicalGear({ color, ...props }: HelicalGearProps): react_jsx_runtime.JSX.Element;
-
 type SpurGearProps = SpurGearModelPropsInput & {
     color?: string;
 };
@@ -1458,21 +1475,4 @@ type WormGearProps = WormGearModelPropsInput & {
 declare function createWormGearGeom(input: WormGearModelPropsInput): _jscad_modeling_src_geometries_types.Geom3;
 declare function WormGear({ color, ...props }: WormGearProps): react_jsx_runtime.JSX.Element;
 
-interface HexBoltMeshOptions {
-    radialSegments?: number;
-    threadStepsPerTurn?: number;
-}
-/** Outward-oriented, welded indexed surface, in millimeters. */
-interface HexBoltMesh {
-    positions: number[];
-    indices: number[];
-}
-declare function createHexBoltMesh(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): HexBoltMesh;
-
-type HexBoltProps = HexBoltModelPropsInput & {
-    color?: string;
-};
-declare function createHexBoltGeom(input: HexBoltModelPropsInput, options?: HexBoltMeshOptions): _jscad_modeling_src_geometries_types.Geom3;
-declare function HexBolt({ color, ...props }: HexBoltProps): react_jsx_runtime.JSX.Element;
-
 export { A01005, A0201, A0402, A0603, A0805, A1206, A1210, A2010, A2512, AxialCapacitor, BGA, CeramicChipAntenna, ChipBody, type ChipBodyProps, Crystal, type CrystalProps, DFN, DO219AD, type DO219ADProps, DPAK, type DPAKProps, Display, ElectrolyticCapacitor, type ElectrolyticCapacitorProps, ExtrudedPads, FPC, type FPCProps, FemaleHeader, FemaleHeaderRow, FlexScreen, type FlexScreenAspectRatio, type FlexScreenOrientation, type FlexScreenProps, FootprintPad, FootprintPlatedHole, Footprinter3d, GullWingBody, type GullWingBodyProps, HC49, type HC49Props, HelicalGear, type HelicalGearMesh, type HelicalGearProps, HexBolt, type HexBoltMesh, type HexBoltMeshOptions, type HexBoltProps, HexSocketBolt, type HexSocketBoltMesh, type HexSocketBoltProps, JSTPH2_0mm, JSTXH2_5mm, type JSTXH2_5mmProps, JSTZH1_5mm, JstSh, LGA, type LGAProps, LQFP, type LQFPProps, Led2835, type Led2835Props, Led5050, type Led5050Props, MELF, type MELFProps, MINIMELF, type MINIMELFProps, MS012, MS013, MSOP, type MSOPProps, MelfResistor, type MelfResistorSize, MicroMELF, type MicroMELFProps, MountedPcbModule, NEMA17, NEMA23, NEMA8, type NemaFrameMotorProps, NemaMotor, type NemaMotorProps, PinHeader, PinRow, Potentiometer, type PotentiometerLead, type PotentiometerProps, QFN, type QFNProps, QFP, RJ45, type RJ45Props, type ResolvedFlexScreenSize, SMA, SMB, SMC, SMF, SOD123, SOD123F, SOD123FL, type SOD123Props, SOD123W, type SOD123WProps, SOD128, SOD323, SOD323F, SOD323FL, SOD323HE, type SOD323HEProps, SOD523, SOD723, SOD882, SOD923, SOIC, type SOICProps, SOT143, SOT223, type SOT223Props, SOT233P, SOT23W, SOT323, SOT363, SOT457, SOT563, SOT723, SOT886, SOT89, type SOT89Props, SOT963, SSOP, type SSOPProps, Screen, type ScreenProps, SheetMetal, type SheetMetalMesh, type SheetMetalProps, SmdChipLead, type SmdChipLeadProps, SmdLED, type SmdLeadPad, type SmdLedSize, SmdPinHeader, type SmdPinHeaderProps, SmdPushButton, type SmdPushButtonProps, SmdSlideSwitch, SpurGear, type SpurGearMesh, type SpurGearProps, StampBoard, TO220, type TO220Lead, type TO220Props, TO277, type TO277Props, TO92, type TO92Lead, type TO92Props, TQFP, TantalumCapacitor, type TantalumCase, Tssop, type TssopProps, TwoPadCrystal, type TwoPadCrystalPackage, UsbCMidmount, VSSOP, WormGear, type WormGearMesh, type WormGearProps, createHelicalGearGeom, createHelicalGearMesh, createHexBoltGeom, createHexBoltMesh, createHexSocketBoltGeom, createHexSocketBoltMesh, createSheetMetalGeom, createSheetMetalMesh, createSpurGearGeom, createSpurGearMesh, createWormGearGeom, createWormGearMesh, isJstShFootprint, melfResistorSizes, resolveFlexScreenSize, smdLedDimensions, tantalumCases, twoPadCrystalPackages };