javonet-nodejs-sdk 2.0.1 → 2.0.5

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/head_httpx4.al

@@ -0,0 +1,13 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1890 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/head_httpx4.al)"
+sub head_httpx4 { do_httpx4(HEAD => @_) }
+
+### Legacy, don't use
+# ($page, $respone_or_err, %headers) = do_https(...);
+
+# end of Net::SSLeay::head_httpx4
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/http_cat.al

@@ -0,0 +1,34 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1678 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/http_cat.al)"
+sub http_cat { # address, port, message --> returns reply / (reply,errs,cert)
+    my ($dest_serv, $port, $out_message) = @_;
+    my ($got, $errs, $written);
+
+    ($got, $errs) = open_proxy_tcp_connection($dest_serv, $port);
+    return (wantarray ? (undef, $errs) : undef) unless $got;
+
+    ### Connected. Exchange some data (doing repeated tries if necessary).
+
+    warn "http_cat $$: sending " . blength($out_message) . " bytes...\n"
+	if $trace==3;
+    warn "http_cat $$: sending `$out_message' (" . blength($out_message)
+	. " bytes)...\n" if $trace>3;
+    ($written, $errs) = tcp_write_all($out_message);
+    goto cleanup unless $written;
+
+    warn "waiting for reply...\n" if $trace>2;
+    ($got, $errs) = tcp_read_all();
+    warn "Got " . blength($got) . " bytes.\n" if $trace==3;
+    warn "Got `$got' (" . blength($got) . " bytes)\n" if $trace>3;
+
+cleanup:
+    close SSLCAT_S;
+    return wantarray ? ($got, $errs) : $got;
+}
+
+# end of Net::SSLeay::http_cat
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/https_cat.al

@@ -0,0 +1,95 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1591 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/https_cat.al)"
+###
+### Basic request - response primitive, this is different from sslcat
+###                 because this does not shutdown the connection.
+###
+
+sub https_cat { # address, port, message --> returns reply / (reply,errs,cert)
+    my ($dest_serv, $port, $out_message, $crt_path, $key_path) = @_;
+    my ($ctx, $ssl, $got, $errs, $written);
+
+    ($got, $errs) = open_proxy_tcp_connection($dest_serv, $port);
+    return (wantarray ? (undef, $errs) : undef) unless $got;
+
+    ### Do SSL negotiation stuff
+
+    warn "Creating SSL $ssl_version context...\n" if $trace>2;
+    initialize();
+
+    $ctx = new_x_ctx();
+    goto cleanup2 if $errs = print_errs('CTX_new') or !$ctx;
+
+    CTX_set_options($ctx, &OP_ALL);
+    goto cleanup2 if $errs = print_errs('CTX_set_options');
+
+    warn "Cert `$crt_path' given without key" if $crt_path && !$key_path;
+    set_cert_and_key($ctx, $crt_path, $key_path) if $crt_path;
+
+    warn "Creating SSL connection (context was '$ctx')...\n" if $trace>2;
+    $ssl = new($ctx);
+    goto cleanup if $errs = print_errs('SSL_new') or !$ssl;
+
+    warn "Setting fd (ctx $ctx, con $ssl)...\n" if $trace>2;
+    set_fd($ssl, fileno(SSLCAT_S));
+    goto cleanup if $errs = print_errs('set_fd');
+
+    warn "Entering SSL negotiation phase...\n" if $trace>2;
+
+    if ($trace>2) {
+	my $i = 0;
+	my $p = '';
+	my $cipher_list = 'Cipher list: ';
+	$p=Net::SSLeay::get_cipher_list($ssl,$i);
+	$cipher_list .= $p if $p;
+	do {
+	    $i++;
+	    $cipher_list .= ', ' . $p if $p;
+	    $p=Net::SSLeay::get_cipher_list($ssl,$i);
+	} while $p;
+	$cipher_list .= '\n';
+	warn $cipher_list;
+    }
+
+    $got = Net::SSLeay::connect($ssl);
+    warn "SSLeay connect failed" if $trace>2 && $got==0;
+    goto cleanup if $errs = print_errs('SSL_connect');
+
+    my $server_cert = get_peer_certificate($ssl);
+    print_errs('get_peer_certificate');
+    if ($trace>1) {
+	warn "Cipher `" . get_cipher($ssl) . "'\n";
+	print_errs('get_ciper');
+	warn dump_peer_certificate($ssl);
+    }
+
+    ### Connected. Exchange some data (doing repeated tries if necessary).
+
+    warn "https_cat $$: sending " . blength($out_message) . " bytes...\n"
+	if $trace==3;
+    warn "https_cat $$: sending `$out_message' (" . blength($out_message)
+	. " bytes)...\n" if $trace>3;
+    ($written, $errs) = ssl_write_all($ssl, $out_message);
+    goto cleanup unless $written;
+
+    warn "waiting for reply...\n" if $trace>2;
+    ($got, $errs) = ssl_read_all($ssl);
+    warn "Got " . blength($got) . " bytes.\n" if $trace==3;
+    warn "Got `$got' (" . blength($got) . " bytes)\n" if $trace>3;
+
+cleanup:
+    free ($ssl);
+    $errs .= print_errs('SSL_free');
+cleanup2:
+    CTX_free ($ctx);
+    $errs .= print_errs('CTX_free');
+    close SSLCAT_S;
+    return wantarray ? ($got, $errs, $server_cert) : $got;
+}
+
+# end of Net::SSLeay::https_cat
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/httpx_cat.al

@@ -0,0 +1,18 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1704 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/httpx_cat.al)"
+sub httpx_cat {
+    my ($usessl, $site, $port, $req, $crt_path, $key_path) = @_;
+    warn "httpx_cat: usessl=$usessl ($site:$port)" if $trace;
+    if ($usessl) {
+	return https_cat($site, $port, $req, $crt_path, $key_path);
+    } else {
+	return http_cat($site, $port, $req);
+    }
+}
+
+# end of Net::SSLeay::httpx_cat
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/initialize.al

@@ -0,0 +1,27 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1444 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/initialize.al)"
+###
+### Standard initialisation. Initialise the ssl library in the usual way
+###  at most once. Override this if you need differnet initialisation
+###  SSLeay_add_ssl_algorithms is also protected against multiple runs in SSLeay.xs
+###  and is also mutex protected in threading perls
+###
+
+my $library_initialised;
+sub initialize
+{
+    if (!$library_initialised)
+    {
+	load_error_strings();         # Some bloat, but I'm after ease of use
+	SSLeay_add_ssl_algorithms();  # and debuggability.
+	randomize();
+	$library_initialised++;
+    }
+}
+
+# end of Net::SSLeay::initialize
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/make_form.al

@@ -0,0 +1,25 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1744 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/make_form.al)"
+###
+### Easy https manipulation routines
+###
+
+sub make_form {
+    my (@fields) = @_;
+    my $form;
+    while (@fields) {
+	my ($name, $data) = (shift(@fields), shift(@fields));
+	$data =~ s/([^\w\-.\@\$ ])/sprintf("%%%2.2x",ord($1))/gse;
+    	$data =~ tr[ ][+];
+	$form .= "$name=$data&";
+    }
+    chop $form;
+    return $form;
+}
+
+# end of Net::SSLeay::make_form
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/make_headers.al

@@ -0,0 +1,21 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1761 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/make_headers.al)"
+sub make_headers {
+    my (@headers) = @_;
+    my $headers;
+    while (@headers) {
+	my $header = shift(@headers);
+	my $value = shift(@headers);
+	$header =~ s/:$//;
+	$value =~ s/\x0d?\x0a$//; # because we add it soon, see below
+	$headers .= "$header: $value$CRLF";
+    }
+    return $headers;
+}
+
+# end of Net::SSLeay::make_headers
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/new_x_ctx.al

@@ -0,0 +1,51 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1401 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/new_x_ctx.al)"
+sub new_x_ctx {
+    if ($ssl_version == 2)  {
+	unless (exists &Net::SSLeay::CTX_v2_new) {
+	    warn "ssl_version has been set to 2, but this version of OpenSSL has been compiled without SSLv2 support";
+	    return undef;
+	}
+	$ctx = CTX_v2_new();
+    }
+    elsif ($ssl_version == 3)  { $ctx = CTX_v3_new(); }
+    elsif ($ssl_version == 10) { $ctx = CTX_tlsv1_new(); }
+    elsif ($ssl_version == 11) {
+	unless (exists &Net::SSLeay::CTX_tlsv1_1_new) {
+	    warn "ssl_version has been set to 11, but this version of OpenSSL has been compiled without TLSv1.1 support";
+	    return undef;
+	}
+        $ctx = CTX_tlsv1_1_new;
+    }
+    elsif ($ssl_version == 12) {
+	unless (exists &Net::SSLeay::CTX_tlsv1_2_new) {
+	    warn "ssl_version has been set to 12, but this version of OpenSSL has been compiled without TLSv1.2 support";
+	    return undef;
+	}
+        $ctx = CTX_tlsv1_2_new;
+    }
+    elsif ($ssl_version == 13) {
+	unless (eval { Net::SSLeay::TLS1_3_VERSION(); } ) {
+	    warn "ssl_version has been set to 13, but this version of OpenSSL has been compiled without TLSv1.3 support";
+	    return undef;
+	}
+        $ctx = CTX_new();
+        unless(Net::SSLeay::CTX_set_min_proto_version($ctx, Net::SSLeay::TLS1_3_VERSION())) {
+            warn "CTX_set_min_proto failed for TLSv1.3";
+            return undef;
+        }
+        unless(Net::SSLeay::CTX_set_max_proto_version($ctx, Net::SSLeay::TLS1_3_VERSION())) {
+            warn "CTX_set_max_proto failed for TLSv1.3";
+            return undef;
+        }
+    }
+    else                       { $ctx = CTX_new(); }
+    return $ctx;
+}
+
+# end of Net::SSLeay::new_x_ctx
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/open_proxy_tcp_connection.al

@@ -0,0 +1,31 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 959 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/open_proxy_tcp_connection.al)"
+### Open connection via standard web proxy, if one was defined
+### using set_proxy().
+
+sub open_proxy_tcp_connection {
+    my ($dest_serv, $port) = @_;
+    return open_tcp_connection($dest_serv, $port) if !$proxyhost;
+
+    warn "Connect via proxy: $proxyhost:$proxyport" if $trace>2;
+    my ($ret, $errs) = open_tcp_connection($proxyhost, $proxyport);
+    return wantarray ? (0, $errs) : 0 if !$ret;  # Connection fail
+
+    warn "Asking proxy to connect to $dest_serv:$port" if $trace>2;
+    #print SSLCAT_S "CONNECT $dest_serv:$port HTTP/1.0$proxyauth$CRLF$CRLF";
+    #my $line = <SSLCAT_S>;   # *** bug? Mixing stdio with syscall read?
+    ($ret, $errs) =
+	tcp_write_all("CONNECT $dest_serv:$port HTTP/1.0$proxyauth$CRLF$CRLF");
+    return wantarray ? (0,$errs) : 0 if $errs;
+    ($line, $errs) = tcp_read_until($CRLF . $CRLF, 1024);
+    warn "Proxy response: $line" if $trace>2;
+    return wantarray ? (0,$errs) : 0 if $errs;
+    return wantarray ? (1,'') : 1;  # Success
+}
+
+# end of Net::SSLeay::open_proxy_tcp_connection
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/open_tcp_connection.al

@@ -0,0 +1,40 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 927 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/open_tcp_connection.al)"
+sub open_tcp_connection {
+    my ($dest_serv, $port) = @_;
+    my ($errs);
+
+    $port = getservbyname($port, 'tcp') unless $port =~ /^\d+$/;
+    my $dest_serv_ip = gethostbyname($dest_serv);
+    unless (defined($dest_serv_ip)) {
+	$errs = "$0 $$: open_tcp_connection: destination host not found:"
+            . " `$dest_serv' (port $port) ($!)\n";
+	warn $errs if $trace;
+        return wantarray ? (0, $errs) : 0;
+    }
+    my $sin = sockaddr_in($port, $dest_serv_ip);
+
+    warn "Opening connection to $dest_serv:$port (" .
+	inet_ntoa($dest_serv_ip) . ")" if $trace>2;
+
+    my $proto = &Socket::IPPROTO_TCP; # getprotobyname('tcp') not available on android
+    if (socket (SSLCAT_S, &PF_INET(), &SOCK_STREAM(), $proto)) {
+        warn "next connect" if $trace>3;
+        if (CORE::connect (SSLCAT_S, $sin)) {
+            my $old_out = select (SSLCAT_S); $| = 1; select ($old_out);
+            warn "connected to $dest_serv, $port" if $trace>3;
+            return wantarray ? (1, undef) : 1; # Success
+        }
+    }
+    $errs = "$0 $$: open_tcp_connection: failed `$dest_serv', $port ($!)\n";
+    warn $errs if $trace;
+    close SSLCAT_S;
+    return wantarray ? (0, $errs) : 0; # Fail
+}
+
+# end of Net::SSLeay::open_tcp_connection
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_http.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1861 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_http.al)"
+sub post_http { do_httpx2(POST => 0, @_) }
+# end of Net::SSLeay::post_http
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_http3.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1866 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_http3.al)"
+sub post_http3 { do_httpx3(POST => 0, @_) }
+# end of Net::SSLeay::post_http3
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_http4.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1871 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_http4.al)"
+sub post_http4 { do_httpx4(POST => 0, @_) }
+# end of Net::SSLeay::post_http4
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_https.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1844 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_https.al)"
+sub post_https { do_httpx2(POST => 1, @_) }
+# end of Net::SSLeay::post_https
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_https3.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1849 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_https3.al)"
+sub post_https3 { do_httpx3(POST => 1, @_) }
+# end of Net::SSLeay::post_https3
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_https4.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1854 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_https4.al)"
+sub post_https4 { do_httpx4(POST => 1, @_) }
+# end of Net::SSLeay::post_https4
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_httpx.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1878 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_httpx.al)"
+sub post_httpx { do_httpx2(POST => @_) }
+# end of Net::SSLeay::post_httpx
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_httpx3.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1883 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_httpx3.al)"
+sub post_httpx3 { do_httpx3(POST => @_) }
+# end of Net::SSLeay::post_httpx3
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/post_httpx4.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1888 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/post_httpx4.al)"
+sub post_httpx4 { do_httpx4(POST => @_) }
+# end of Net::SSLeay::post_httpx4
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_http.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1862 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_http.al)"
+sub put_http  { do_httpx2(PUT  => 0, @_) }
+# end of Net::SSLeay::put_http
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_http3.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1867 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_http3.al)"
+sub put_http3  { do_httpx3(PUT  => 0, @_) }
+# end of Net::SSLeay::put_http3
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_http4.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1872 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_http4.al)"
+sub put_http4  { do_httpx4(PUT  => 0, @_) }
+# end of Net::SSLeay::put_http4
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_https.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1845 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_https.al)"
+sub put_https  { do_httpx2(PUT  => 1, @_) }
+# end of Net::SSLeay::put_https
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_https3.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1850 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_https3.al)"
+sub put_https3  { do_httpx3(PUT  => 1, @_) }
+# end of Net::SSLeay::put_https3
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_https4.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1855 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_https4.al)"
+sub put_https4  { do_httpx4(PUT  => 1, @_) }
+# end of Net::SSLeay::put_https4
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_httpx.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1879 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_httpx.al)"
+sub put_httpx  { do_httpx2(PUT  => @_) }
+# end of Net::SSLeay::put_httpx
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_httpx3.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1884 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_httpx3.al)"
+sub put_httpx3  { do_httpx3(PUT  => @_) }
+# end of Net::SSLeay::put_httpx3
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/put_httpx4.al

@@ -0,0 +1,9 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1889 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/put_httpx4.al)"
+sub put_httpx4  { do_httpx4(PUT  => @_) }
+# end of Net::SSLeay::put_httpx4
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/randomize.al

@@ -0,0 +1,31 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1378 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/randomize.al)"
+### Arrange some randomness for eay PRNG
+
+sub randomize (;$$$) {
+    my ($rn_seed_file, $seed, $egd_path) = @_;
+    my $rnsf = defined($rn_seed_file) && -r $rn_seed_file;
+
+	$egd_path = '';
+    $egd_path = $ENV{'EGD_PATH'} if $ENV{'EGD_PATH'};
+
+    RAND_seed(rand() + $$);  # Stir it with time and pid
+
+    unless ($rnsf || -r $Net::SSLeay::random_device || $seed || -S $egd_path) {
+	my $poll_retval = Net::SSLeay::RAND_poll();
+	warn "Random number generator not seeded!!!" if $trace && !$poll_retval;
+    }
+
+    RAND_load_file($rn_seed_file, -s _) if $rnsf;
+    RAND_seed($seed) if $seed;
+    RAND_seed($ENV{RND_SEED}) if $ENV{RND_SEED};
+    RAND_load_file($Net::SSLeay::random_device, $Net::SSLeay::how_random/8)
+	if -r $Net::SSLeay::random_device;
+}
+
+# end of Net::SSLeay::randomize
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/set_cert_and_key.al

@@ -0,0 +1,23 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1714 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/set_cert_and_key.al)"
+###
+### Easy set up of private key and certificate
+###
+
+sub set_cert_and_key ($$$) {
+    my ($ctx, $cert_path, $key_path) = @_;
+    my $errs = '';
+    # Following will ask password unless private key is not encrypted
+    CTX_use_PrivateKey_file( $ctx, $key_path, &FILETYPE_PEM ) == 1
+        or $errs .= print_errs("private key `$key_path' ($!)");
+    CTX_use_certificate_file ($ctx, $cert_path, &FILETYPE_PEM) == 1
+        or $errs .= print_errs("certificate `$cert_path' ($!)");
+    return wantarray ? (undef, $errs) : ($errs eq '');
+}
+
+# end of Net::SSLeay::set_cert_and_key
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/set_proxy.al

@@ -0,0 +1,17 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1735 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/set_proxy.al)"
+sub set_proxy ($$;**) {
+    ($proxyhost, $proxyport, $proxyuser, $proxypass) = @_;
+    require MIME::Base64 if $proxyuser;
+    $proxyauth = $proxyuser
+         ? $CRLF . 'Proxy-authorization: Basic '
+	 . MIME::Base64::encode("$proxyuser:$proxypass", '')
+	 : '';
+}
+
+# end of Net::SSLeay::set_proxy
+1;

package/Binaries/Perl/MacOs/X64/deps/lib/perl5/darwin-thread-multi-2level/auto/Net/SSLeay/set_server_cert_and_key.al

@@ -0,0 +1,14 @@
+# NOTE: Derived from blib/lib/Net/SSLeay.pm.
+# Changes made here will be lost when autosplit is run again.
+# See AutoSplit.pm.
+package Net::SSLeay;
+
+#line 1729 "blib/lib/Net/SSLeay.pm (autosplit into blib/lib/auto/Net/SSLeay/set_server_cert_and_key.al)"
+### Old deprecated API
+
+sub set_server_cert_and_key ($$$) { &set_cert_and_key }
+
+### Set up to use web proxy
+
+# end of Net::SSLeay::set_server_cert_and_key
+1;